diff --git a/.gitignore b/.gitignore
index 789f57e..0f95b4c 100644
--- a/.gitignore
+++ b/.gitignore
@@ -31,6 +31,17 @@
 # Python build artifacts:
 *.pyc
 
+# CMake generates *.dir/ folders for in-tree builds (used by MSVC projects), ignore all of those:
+*.dir/
+
+# Visual Studio artifacts
+/visualc/VS2010/.localhistory/
+/visualc/VS2010/.vs/
+/visualc/VS2010/Debug/
+/visualc/VS2010/Release/
+/visualc/VS2010/*.vcxproj.filters
+/visualc/VS2010/*.vcxproj.user
+
 # Generated documentation:
 /apidoc
 
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 38c8006..67ec7cc 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -5,6 +5,8 @@
     project("mbed TLS" C)
 endif()
 
+set(MBEDTLS_DIR ${CMAKE_CURRENT_SOURCE_DIR})
+
 option(USE_PKCS11_HELPER_LIBRARY "Build mbed TLS with the pkcs11-helper library." OFF)
 option(ENABLE_ZLIB_SUPPORT "Build mbed TLS with zlib library." OFF)
 
@@ -127,7 +129,10 @@
     # note: starting with CMake 2.8 we could use CMAKE_C_COMPILER_VERSION
     execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion
                     OUTPUT_VARIABLE GCC_VERSION)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -W -Wdeclaration-after-statement -Wwrite-strings")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -Wwrite-strings")
+    if (GCC_VERSION VERSION_GREATER 4.3 OR GCC_VERSION VERSION_EQUAL 4.3)
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wvla")
+    endif()
     if (GCC_VERSION VERSION_GREATER 4.5 OR GCC_VERSION VERSION_EQUAL 4.5)
         set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wlogical-op")
     endif()
@@ -144,7 +149,7 @@
 endif(CMAKE_COMPILER_IS_GNU)
 
 if(CMAKE_COMPILER_IS_CLANG)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -W -Wdeclaration-after-statement -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla")
     set(CMAKE_C_FLAGS_RELEASE     "-O2")
     set(CMAKE_C_FLAGS_DEBUG       "-O0 -g3")
     set(CMAKE_C_FLAGS_COVERAGE    "-O0 -g3 --coverage")
diff --git a/ChangeLog b/ChangeLog
index a461008..37373a2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -74,6 +74,11 @@
      irwir.
    * Enable Suite B with subset of ECP curves. Make sure the code compiles even
      if some curves are not defined. Fixes #1591 reported by dbedev.
+   * Fix misuse of signed arithmetic in the HAVEGE module. #2598
+   * Avoid use of statically sized stack buffers for certificate writing.
+     This previously limited the maximum size of DER encoded certificates
+     in mbedtls_x509write_crt_der() to 2Kb. Reported by soccerGB in #2631.
+   * Fix partial zeroing in x509_get_other_name. Found and fixed by ekse, #2716.
 
 API Changes
    * Extend the MBEDTLS_SSL_EXPORT_KEYS to export the handshake randbytes,
@@ -82,6 +87,7 @@
    * Add DER-encoded test CRTs to library/certs.c, allowing
      the example programs ssl_server2 and ssl_client2 to be run
      if MBEDTLS_FS_IO and MBEDTLS_PEM_PARSE_C are unset. Fixes #2254.
+   * The HAVEGE state type now uses uint32_t elements instead of int.
 
 Changes
    * Server's RSA certificate in certs.c was SHA-1 signed. In the default
@@ -103,6 +109,27 @@
    * Make it easier to define MBEDTLS_PARAM_FAILED as assert (which config.h
      suggests). #2671
    * Make `make clean` clean all programs always. Fixes #1862.
+   * Add a Dockerfile and helper scripts (all-in-docker.sh, basic-in-docker.sh,
+     docker-env.sh) to simplify running test suites on a Linux host. Contributed
+     by Peter Kolbus (Garmin).
+   * Enable building of Mbed TLS as a CMake subproject. Suggested and fixed by
+     Ashley Duncan in #2609.
+   * Add `reproducible` option to `ssl_client2` and `ssl_server2` to enable
+     test runs without variability. Contributed by Philippe Antoine (Catena
+     cyber) in #2681.
+   * Extended .gitignore to ignore Visual Studio artifacts. Fixed by ConfusedSushi.
+   * Enable building of Mbed TLS as a CMake subproject. Suggested and fixed by
+     Ashley Duncan in #2609.
+   * Add `reproducible` option to `ssl_client2` and `ssl_server2` to enable
+     test runs without variability. Contributed by Philippe Antoine (Catena
+     cyber) in #2681.
+   * Enable building of Mbed TLS as a CMake subproject. Suggested and fixed by
+     Ashley Duncan in #2609.
+   * Add `reproducible` option to `ssl_client2` and `ssl_server2` to enable
+     test runs without variability. Contributed by Philippe Antoine (Catena
+     cyber) in #2681.
+   * Adds fuzz targets, especially for continuous fuzzing with OSS-Fuzz.
+     Contributed by Philippe Antoine (Catena cyber).
 
 = mbed TLS 2.17.0 branch released 2019-03-19
 
diff --git a/README.md b/README.md
index 5b01603..83b3234 100644
--- a/README.md
+++ b/README.md
@@ -64,7 +64,7 @@
 
 Setting the variable `SHARED` in your environment will build shared libraries in addition to the static libraries. Setting `DEBUG` gives you a debug build. You can override `CFLAGS` and `LDFLAGS` by setting them in your environment or on the make command line; compiler warning options may be overridden separately using `WARNING_CFLAGS`. Some directory-specific options (for example, `-I` directives) are still preserved.
 
-Please note that setting `CFLAGS` overrides its default value of `-O2` and setting `WARNING_CFLAGS` overrides its default value (starting with `-Wall -W`), so if you just want to add some warning options to the default ones, you can do so by setting `CFLAGS=-O2 -Werror` for example. Setting `WARNING_CFLAGS` is useful when you want to get rid of its default content (for example because your compiler doesn't accept `-Wall` as an option). Directory-specific options cannot be overridden from the command line.
+Please note that setting `CFLAGS` overrides its default value of `-O2` and setting `WARNING_CFLAGS` overrides its default value (starting with `-Wall -Wextra`), so if you just want to add some warning options to the default ones, you can do so by setting `CFLAGS=-O2 -Werror` for example. Setting `WARNING_CFLAGS` is useful when you want to get rid of its default content (for example because your compiler doesn't accept `-Wall` as an option). Directory-specific options cannot be overridden from the command line.
 
 Depending on your platform, you might run into some issues. Please check the Makefiles in `library/`, `programs/` and `tests/` for options to manually add or remove for specific platforms. You can also check [the Mbed TLS Knowledge Base](https://tls.mbed.org/kb) for articles on your platform or issue.
 
@@ -146,6 +146,12 @@
 your value of CFLAGS doesn't override the content provided by cmake (depending
 on the build mode as seen above), it's merely prepended to it.
 
+#### Mbed TLS as a subproject
+
+Mbed TLS, like Mbed Crypto, supports being built as a CMake subproject. One can
+use `add_subdirectory()` from a parent CMake project to include Mbed TLS as a
+subproject.
+
 ### Microsoft Visual Studio
 
 The build files for Microsoft Visual Studio are generated for Visual Studio 2010.
diff --git a/crypto b/crypto
index 86268e1..b6229e3 160000
--- a/crypto
+++ b/crypto
@@ -1 +1 @@
-Subproject commit 86268e1d302355ad8fd8e5ca5f1a7c7af8640678
+Subproject commit b6229e304e69e672dec653700467c696d32d19ae
diff --git a/include/mbedtls/havege.h b/include/mbedtls/havege.h
index 4c1c860..749257a 100644
--- a/include/mbedtls/havege.h
+++ b/include/mbedtls/havege.h
@@ -31,6 +31,7 @@
 #endif
 
 #include <stddef.h>
+#include <stdint.h>
 
 #define MBEDTLS_HAVEGE_COLLECT_SIZE 1024
 
@@ -43,9 +44,9 @@
  */
 typedef struct mbedtls_havege_state
 {
-    int PT1, PT2, offset[2];
-    int pool[MBEDTLS_HAVEGE_COLLECT_SIZE];
-    int WALK[8192];
+    uint32_t PT1, PT2, offset[2];
+    uint32_t pool[MBEDTLS_HAVEGE_COLLECT_SIZE];
+    uint32_t WALK[8192];
 }
 mbedtls_havege_state;
 
diff --git a/include/mbedtls/pem.h b/include/mbedtls/pem.h
index a29e9ce..b37f987 100644
--- a/include/mbedtls/pem.h
+++ b/include/mbedtls/pem.h
@@ -112,17 +112,27 @@
  * \brief           Write a buffer of PEM information from a DER encoded
  *                  buffer.
  *
- * \param header    header string to write
- * \param footer    footer string to write
- * \param der_data  DER data to write
- * \param der_len   length of the DER data
- * \param buf       buffer to write to
- * \param buf_len   length of output buffer
- * \param olen      total length written / required (if buf_len is not enough)
+ * \param header    The header string to write.
+ * \param footer    The footer string to write.
+ * \param der_data  The DER data to encode.
+ * \param der_len   The length of the DER data \p der_data in Bytes.
+ * \param buf       The buffer to write to.
+ * \param buf_len   The length of the output buffer \p buf in Bytes.
+ * \param olen      The address at which to store the total length written
+ *                  or required (if \p buf_len is not enough).
  *
- * \return          0 on success, or a specific PEM or BASE64 error code. On
- *                  MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL olen is the required
- *                  size.
+ * \note            You may pass \c NULL for \p buf and \c 0 for \p buf_len
+ *                  to request the length of the resulting PEM buffer in
+ *                  `*olen`.
+ *
+ * \note            This function may be called with overlapping \p der_data
+ *                  and \p buf buffers.
+ *
+ * \return          \c 0 on success.
+ * \return          #MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL if \p buf isn't large
+ *                  enough to hold the PEM buffer. In  this case, `*olen` holds
+ *                  the required minimum size of \p buf.
+ * \return          Another PEM or BASE64 error code on other kinds of failure.
  */
 int mbedtls_pem_write_buffer( const char *header, const char *footer,
                       const unsigned char *der_data, size_t der_len,
diff --git a/include/mbedtls/x509_crt.h b/include/mbedtls/x509_crt.h
index cd3be09..6983d60 100644
--- a/include/mbedtls/x509_crt.h
+++ b/include/mbedtls/x509_crt.h
@@ -32,6 +32,7 @@
 
 #include "x509.h"
 #include "x509_crl.h"
+#include "bignum.h"
 
 /**
  * \addtogroup x509_module
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index 1004cb3..7f0819e 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -151,15 +151,15 @@
     set_target_properties(${mbedx509_static_target} PROPERTIES OUTPUT_NAME mbedx509)
     target_link_libraries(${mbedx509_static_target} ${libs} ${mbedcrypto_static_target})
     target_include_directories(${mbedx509_static_target}
-        PUBLIC ${CMAKE_SOURCE_DIR}/include/
-        PUBLIC ${CMAKE_SOURCE_DIR}/crypto/include/)
+        PUBLIC ${MBEDTLS_DIR}/include/
+        PUBLIC ${MBEDTLS_DIR}/crypto/include/)
 
     add_library(${mbedtls_static_target} STATIC ${src_tls})
     set_target_properties(${mbedtls_static_target} PROPERTIES OUTPUT_NAME mbedtls)
     target_link_libraries(${mbedtls_static_target} ${libs} ${mbedx509_static_target})
     target_include_directories(${mbedtls_static_target}
-        PUBLIC ${CMAKE_SOURCE_DIR}/include/
-        PUBLIC ${CMAKE_SOURCE_DIR}/crypto/include/
+        PUBLIC ${MBEDTLS_DIR}/include/
+        PUBLIC ${MBEDTLS_DIR}/crypto/include/
         )
 
 
@@ -175,15 +175,15 @@
     set_target_properties(mbedx509 PROPERTIES VERSION 2.17.0 SOVERSION 0)
     target_link_libraries(mbedx509 ${libs} mbedcrypto)
     target_include_directories(mbedx509
-        PUBLIC ${CMAKE_SOURCE_DIR}/include/
-        PUBLIC ${CMAKE_SOURCE_DIR}/crypto/include/)
+        PUBLIC ${MBEDTLS_DIR}/include/
+        PUBLIC ${MBEDTLS_DIR}/crypto/include/)
 
     add_library(mbedtls SHARED ${src_tls})
     set_target_properties(mbedtls PROPERTIES VERSION 2.17.0 SOVERSION 12)
     target_link_libraries(mbedtls ${libs} mbedx509)
     target_include_directories(mbedtls
-        PUBLIC ${CMAKE_SOURCE_DIR}/include/
-        PUBLIC ${CMAKE_SOURCE_DIR}/crypto/include/)
+        PUBLIC ${MBEDTLS_DIR}/include/
+        PUBLIC ${MBEDTLS_DIR}/crypto/include/)
 
       install(TARGETS mbedtls mbedx509
               DESTINATION ${LIB_INSTALL_DIR}
diff --git a/library/Makefile b/library/Makefile
index 60f3ae0..8b2e572 100644
--- a/library/Makefile
+++ b/library/Makefile
@@ -2,7 +2,7 @@
 # Also see "include/mbedtls/config.h"
 
 CFLAGS	?= -O2
-WARNING_CFLAGS ?=  -Wall -W -Wdeclaration-after-statement
+WARNING_CFLAGS ?=  -Wall -Wextra
 LDFLAGS ?=
 
 LOCAL_CFLAGS = $(WARNING_CFLAGS) -I../include -D_FILE_OFFSET_BITS=64
diff --git a/library/x509_crt.c b/library/x509_crt.c
index d101bc7..b2c19db 100644
--- a/library/x509_crt.c
+++ b/library/x509_crt.c
@@ -1687,7 +1687,7 @@
 
     if( p + len >= end )
     {
-        mbedtls_platform_zeroize( other_name, sizeof( other_name ) );
+        mbedtls_platform_zeroize( other_name, sizeof( *other_name ) );
         return( MBEDTLS_ERR_X509_INVALID_EXTENSIONS +
                 MBEDTLS_ERR_ASN1_LENGTH_MISMATCH );
     }
@@ -1709,7 +1709,7 @@
 
     if( p + len >= end )
     {
-        mbedtls_platform_zeroize( other_name, sizeof( other_name ) );
+        mbedtls_platform_zeroize( other_name, sizeof( *other_name ) );
         return( MBEDTLS_ERR_X509_INVALID_EXTENSIONS +
                 MBEDTLS_ERR_ASN1_LENGTH_MISMATCH );
     }
@@ -1725,7 +1725,7 @@
     if( p != end )
     {
         mbedtls_platform_zeroize( other_name,
-                                  sizeof( other_name ) );
+                                  sizeof( *other_name ) );
         return( MBEDTLS_ERR_X509_INVALID_EXTENSIONS +
                 MBEDTLS_ERR_ASN1_LENGTH_MISMATCH );
     }
diff --git a/library/x509write_crt.c b/library/x509write_crt.c
index b6cb745..3c23214 100644
--- a/library/x509write_crt.c
+++ b/library/x509write_crt.c
@@ -64,39 +64,44 @@
     mbedtls_platform_zeroize( ctx, sizeof( mbedtls_x509write_cert ) );
 }
 
-void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version )
+void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx,
+                                        int version )
 {
     ctx->version = version;
 }
 
-void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg )
+void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx,
+                                       mbedtls_md_type_t md_alg )
 {
     ctx->md_alg = md_alg;
 }
 
-void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key )
+void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx,
+                                            mbedtls_pk_context *key )
 {
     ctx->subject_key = key;
 }
 
-void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key )
+void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx,
+                                           mbedtls_pk_context *key )
 {
     ctx->issuer_key = key;
 }
 
 int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx,
-                                    const char *subject_name )
+                                            const char *subject_name )
 {
     return mbedtls_x509_string_to_names( &ctx->subject, subject_name );
 }
 
 int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx,
-                                   const char *issuer_name )
+                                           const char *issuer_name )
 {
     return mbedtls_x509_string_to_names( &ctx->issuer, issuer_name );
 }
 
-int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial )
+int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx,
+                                      const mbedtls_mpi *serial )
 {
     int ret;
 
@@ -106,8 +111,9 @@
     return( 0 );
 }
 
-int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before,
-                                const char *not_after )
+int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx,
+                                        const char *not_before,
+                                        const char *not_after )
 {
     if( strlen( not_before ) != MBEDTLS_X509_RFC5280_UTC_TIME_LEN - 1 ||
         strlen( not_after )  != MBEDTLS_X509_RFC5280_UTC_TIME_LEN - 1 )
@@ -127,12 +133,12 @@
                                  int critical,
                                  const unsigned char *val, size_t val_len )
 {
-    return mbedtls_x509_set_extension( &ctx->extensions, oid, oid_len,
-                               critical, val, val_len );
+    return( mbedtls_x509_set_extension( &ctx->extensions, oid, oid_len,
+                                        critical, val, val_len ) );
 }
 
 int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx,
-                                         int is_ca, int max_pathlen )
+                                                 int is_ca, int max_pathlen )
 {
     int ret;
     unsigned char buf[9];
@@ -148,18 +154,21 @@
     {
         if( max_pathlen >= 0 )
         {
-            MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_int( &c, buf, max_pathlen ) );
+            MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_int( &c, buf,
+                                                               max_pathlen ) );
         }
         MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_bool( &c, buf, 1 ) );
     }
 
     MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_CONSTRUCTED |
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf,
+                                                MBEDTLS_ASN1_CONSTRUCTED |
                                                 MBEDTLS_ASN1_SEQUENCE ) );
 
-    return mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_BASIC_CONSTRAINTS,
-                                        MBEDTLS_OID_SIZE( MBEDTLS_OID_BASIC_CONSTRAINTS ),
-                                        0, buf + sizeof(buf) - len, len );
+    return(
+        mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_BASIC_CONSTRAINTS,
+                             MBEDTLS_OID_SIZE( MBEDTLS_OID_BASIC_CONSTRAINTS ),
+                             0, buf + sizeof(buf) - len, len ) );
 }
 
 #if defined(MBEDTLS_SHA1_C)
@@ -171,7 +180,8 @@
     size_t len = 0;
 
     memset( buf, 0, sizeof(buf) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_pk_write_pubkey( &c, buf, ctx->subject_key ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                mbedtls_pk_write_pubkey( &c, buf, ctx->subject_key ) );
 
     ret = mbedtls_sha1_ret( buf + sizeof( buf ) - len, len,
                             buf + sizeof( buf ) - 20 );
@@ -181,11 +191,13 @@
     len = 20;
 
     MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_OCTET_STRING ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+            mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_OCTET_STRING ) );
 
-    return mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER,
-                                        MBEDTLS_OID_SIZE( MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER ),
-                                        0, buf + sizeof(buf) - len, len );
+    return mbedtls_x509write_crt_set_extension( ctx,
+                 MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER,
+                 MBEDTLS_OID_SIZE( MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER ),
+                 0, buf + sizeof(buf) - len, len );
 }
 
 int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx )
@@ -196,7 +208,8 @@
     size_t len = 0;
 
     memset( buf, 0, sizeof(buf) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_pk_write_pubkey( &c, buf, ctx->issuer_key ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                          mbedtls_pk_write_pubkey( &c, buf, ctx->issuer_key ) );
 
     ret = mbedtls_sha1_ret( buf + sizeof( buf ) - len, len,
                             buf + sizeof( buf ) - 20 );
@@ -206,15 +219,19 @@
     len = 20;
 
     MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_CONTEXT_SPECIFIC | 0 ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+        mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_CONTEXT_SPECIFIC | 0 ) );
 
     MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_CONSTRUCTED |
-                                                MBEDTLS_ASN1_SEQUENCE ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                          mbedtls_asn1_write_tag( &c, buf,
+                                                  MBEDTLS_ASN1_CONSTRUCTED |
+                                                  MBEDTLS_ASN1_SEQUENCE ) );
 
-    return mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER,
-                                   MBEDTLS_OID_SIZE( MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER ),
-                                   0, buf + sizeof( buf ) - len, len );
+    return mbedtls_x509write_crt_set_extension(
+        ctx, MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER,
+        MBEDTLS_OID_SIZE( MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER ),
+        0, buf + sizeof( buf ) - len, len );
 }
 #endif /* MBEDTLS_SHA1_C */
 
@@ -249,8 +266,8 @@
         return( MBEDTLS_ERR_X509_INVALID_FORMAT );
 
     ret = mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_KEY_USAGE,
-                                       MBEDTLS_OID_SIZE( MBEDTLS_OID_KEY_USAGE ),
-                                       1, c, (size_t)ret );
+                                   MBEDTLS_OID_SIZE( MBEDTLS_OID_KEY_USAGE ),
+                                   1, c, (size_t)ret );
     if( ret != 0 )
         return( ret );
 
@@ -271,8 +288,8 @@
         return( ret );
 
     ret = mbedtls_x509write_crt_set_extension( ctx, MBEDTLS_OID_NS_CERT_TYPE,
-                                       MBEDTLS_OID_SIZE( MBEDTLS_OID_NS_CERT_TYPE ),
-                                       0, c, (size_t)ret );
+                                   MBEDTLS_OID_SIZE( MBEDTLS_OID_NS_CERT_TYPE ),
+                                   0, c, (size_t)ret );
     if( ret != 0 )
         return( ret );
 
@@ -294,7 +311,8 @@
                                              (const unsigned char *) t + 2,
                                              size - 2 ) );
         MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( p, start, len ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( p, start, MBEDTLS_ASN1_UTC_TIME ) );
+        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( p, start,
+                                             MBEDTLS_ASN1_UTC_TIME ) );
     }
     else
     {
@@ -302,15 +320,17 @@
                                                   (const unsigned char *) t,
                                                   size ) );
         MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( p, start, len ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( p, start, MBEDTLS_ASN1_GENERALIZED_TIME ) );
+        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( p, start,
+                                             MBEDTLS_ASN1_GENERALIZED_TIME ) );
     }
 
     return( (int) len );
 }
 
-int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size,
-                       int (*f_rng)(void *, unsigned char *, size_t),
-                       void *p_rng )
+int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx,
+                               unsigned char *buf, size_t size,
+                               int (*f_rng)(void *, unsigned char *, size_t),
+                               void *p_rng )
 {
     int ret;
     const char *sig_oid;
@@ -318,15 +338,14 @@
     unsigned char *c, *c2;
     unsigned char hash[64];
     unsigned char sig[MBEDTLS_MPI_MAX_SIZE];
-    unsigned char tmp_buf[2048];
     size_t sub_len = 0, pub_len = 0, sig_and_oid_len = 0, sig_len;
     size_t len = 0;
     mbedtls_pk_type_t pk_alg;
 
     /*
-     * Prepare data to be signed in tmp_buf
+     * Prepare data to be signed at the end of the target buffer
      */
-    c = tmp_buf + sizeof( tmp_buf );
+    c = buf + size;
 
     /* Signature algorithm needed in TBS, and later for actual signature */
 
@@ -352,27 +371,36 @@
     /* Only for v3 */
     if( ctx->version == MBEDTLS_X509_CRT_VERSION_3 )
     {
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_x509_write_extensions( &c, tmp_buf, ctx->extensions ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, tmp_buf, len ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, tmp_buf, MBEDTLS_ASN1_CONSTRUCTED |
-                                                           MBEDTLS_ASN1_SEQUENCE ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, tmp_buf, len ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, tmp_buf, MBEDTLS_ASN1_CONTEXT_SPECIFIC |
-                                                           MBEDTLS_ASN1_CONSTRUCTED | 3 ) );
+        MBEDTLS_ASN1_CHK_ADD( len,
+                              mbedtls_x509_write_extensions( &c,
+                                                      buf, ctx->extensions ) );
+        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
+        MBEDTLS_ASN1_CHK_ADD( len,
+                              mbedtls_asn1_write_tag( &c, buf,
+                                                      MBEDTLS_ASN1_CONSTRUCTED |
+                                                      MBEDTLS_ASN1_SEQUENCE ) );
+        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
+        MBEDTLS_ASN1_CHK_ADD( len,
+                              mbedtls_asn1_write_tag( &c, buf,
+                                               MBEDTLS_ASN1_CONTEXT_SPECIFIC |
+                                               MBEDTLS_ASN1_CONSTRUCTED | 3 ) );
     }
 
     /*
      *  SubjectPublicKeyInfo
      */
-    MBEDTLS_ASN1_CHK_ADD( pub_len, mbedtls_pk_write_pubkey_der( ctx->subject_key,
-                                                tmp_buf, c - tmp_buf ) );
+    MBEDTLS_ASN1_CHK_ADD( pub_len,
+                          mbedtls_pk_write_pubkey_der( ctx->subject_key,
+                                                       buf, c - buf ) );
     c -= pub_len;
     len += pub_len;
 
     /*
      *  Subject  ::=  Name
      */
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_x509_write_names( &c, tmp_buf, ctx->subject ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                          mbedtls_x509_write_names( &c, buf,
+                                                    ctx->subject ) );
 
     /*
      *  Validity ::= SEQUENCE {
@@ -381,32 +409,39 @@
      */
     sub_len = 0;
 
-    MBEDTLS_ASN1_CHK_ADD( sub_len, x509_write_time( &c, tmp_buf, ctx->not_after,
-                                            MBEDTLS_X509_RFC5280_UTC_TIME_LEN ) );
+    MBEDTLS_ASN1_CHK_ADD( sub_len,
+                          x509_write_time( &c, buf, ctx->not_after,
+                                        MBEDTLS_X509_RFC5280_UTC_TIME_LEN ) );
 
-    MBEDTLS_ASN1_CHK_ADD( sub_len, x509_write_time( &c, tmp_buf, ctx->not_before,
-                                            MBEDTLS_X509_RFC5280_UTC_TIME_LEN ) );
+    MBEDTLS_ASN1_CHK_ADD( sub_len,
+                          x509_write_time( &c, buf, ctx->not_before,
+                                        MBEDTLS_X509_RFC5280_UTC_TIME_LEN ) );
 
     len += sub_len;
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, tmp_buf, sub_len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, tmp_buf, MBEDTLS_ASN1_CONSTRUCTED |
-                                                    MBEDTLS_ASN1_SEQUENCE ) );
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, sub_len ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                          mbedtls_asn1_write_tag( &c, buf,
+                                                  MBEDTLS_ASN1_CONSTRUCTED |
+                                                  MBEDTLS_ASN1_SEQUENCE ) );
 
     /*
      *  Issuer  ::=  Name
      */
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_x509_write_names( &c, tmp_buf, ctx->issuer ) );
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_x509_write_names( &c, buf,
+                                                         ctx->issuer ) );
 
     /*
      *  Signature   ::=  AlgorithmIdentifier
      */
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_algorithm_identifier( &c, tmp_buf,
-                       sig_oid, strlen( sig_oid ), 0 ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                          mbedtls_asn1_write_algorithm_identifier( &c, buf,
+                                              sig_oid, strlen( sig_oid ), 0 ) );
 
     /*
      *  Serial   ::=  INTEGER
      */
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_mpi( &c, tmp_buf, &ctx->serial ) );
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_mpi( &c, buf,
+                                                       &ctx->serial ) );
 
     /*
      *  Version  ::=  INTEGER  {  v1(0), v2(1), v3(2)  }
@@ -416,48 +451,67 @@
     if( ctx->version != MBEDTLS_X509_CRT_VERSION_1 )
     {
         sub_len = 0;
-        MBEDTLS_ASN1_CHK_ADD( sub_len, mbedtls_asn1_write_int( &c, tmp_buf, ctx->version ) );
+        MBEDTLS_ASN1_CHK_ADD( sub_len,
+                              mbedtls_asn1_write_int( &c, buf, ctx->version ) );
         len += sub_len;
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, tmp_buf, sub_len ) );
-        MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, tmp_buf, MBEDTLS_ASN1_CONTEXT_SPECIFIC |
-                                                           MBEDTLS_ASN1_CONSTRUCTED | 0 ) );
+        MBEDTLS_ASN1_CHK_ADD( len,
+                              mbedtls_asn1_write_len( &c, buf, sub_len ) );
+        MBEDTLS_ASN1_CHK_ADD( len,
+                              mbedtls_asn1_write_tag( &c, buf,
+                                               MBEDTLS_ASN1_CONTEXT_SPECIFIC |
+                                               MBEDTLS_ASN1_CONSTRUCTED | 0 ) );
     }
 
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, tmp_buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, tmp_buf, MBEDTLS_ASN1_CONSTRUCTED |
-                                                       MBEDTLS_ASN1_SEQUENCE ) );
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
+    MBEDTLS_ASN1_CHK_ADD( len,
+                mbedtls_asn1_write_tag( &c, buf, MBEDTLS_ASN1_CONSTRUCTED |
+                                                     MBEDTLS_ASN1_SEQUENCE ) );
 
     /*
      * Make signature
      */
+
+    /* Compute hash of CRT. */
     if( ( ret = mbedtls_md( mbedtls_md_info_from_type( ctx->md_alg ), c,
                             len, hash ) ) != 0 )
     {
         return( ret );
     }
 
-    if( ( ret = mbedtls_pk_sign( ctx->issuer_key, ctx->md_alg, hash, 0, sig, &sig_len,
-                         f_rng, p_rng ) ) != 0 )
+    if( ( ret = mbedtls_pk_sign( ctx->issuer_key, ctx->md_alg,
+                                 hash, 0, sig, &sig_len,
+                                 f_rng, p_rng ) ) != 0 )
     {
         return( ret );
     }
 
-    /*
-     * Write data to output buffer
-     */
+    /* Move CRT to the front of the buffer to have space
+     * for the signature. */
+    memmove( buf, c, len );
+    c = buf + len;
+
+    /* Add signature at the end of the buffer,
+     * making sure that it doesn't underflow
+     * into the CRT buffer. */
     c2 = buf + size;
-    MBEDTLS_ASN1_CHK_ADD( sig_and_oid_len, mbedtls_x509_write_sig( &c2, buf,
+    MBEDTLS_ASN1_CHK_ADD( sig_and_oid_len, mbedtls_x509_write_sig( &c2, c,
                                         sig_oid, sig_oid_len, sig, sig_len ) );
 
-    if( len > (size_t)( c2 - buf ) )
-        return( MBEDTLS_ERR_ASN1_BUF_TOO_SMALL );
+    /*
+     * Memory layout after this step:
+     *
+     * buf       c=buf+len                c2            buf+size
+     * [CRT0,...,CRTn, UNUSED, ..., UNUSED, SIG0, ..., SIGm]
+     */
 
-    c2 -= len;
-    memcpy( c2, c, len );
+    /* Move raw CRT to just before the signature. */
+    c = c2 - len;
+    memmove( c, buf, len );
 
     len += sig_and_oid_len;
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c2, buf, len ) );
-    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c2, buf, MBEDTLS_ASN1_CONSTRUCTED |
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_len( &c, buf, len ) );
+    MBEDTLS_ASN1_CHK_ADD( len, mbedtls_asn1_write_tag( &c, buf,
+                                                 MBEDTLS_ASN1_CONSTRUCTED |
                                                  MBEDTLS_ASN1_SEQUENCE ) );
 
     return( (int) len );
@@ -467,23 +521,23 @@
 #define PEM_END_CRT             "-----END CERTIFICATE-----\n"
 
 #if defined(MBEDTLS_PEM_WRITE_C)
-int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *crt, unsigned char *buf, size_t size,
-                       int (*f_rng)(void *, unsigned char *, size_t),
-                       void *p_rng )
+int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *crt,
+                               unsigned char *buf, size_t size,
+                               int (*f_rng)(void *, unsigned char *, size_t),
+                               void *p_rng )
 {
     int ret;
-    unsigned char output_buf[4096];
-    size_t olen = 0;
+    size_t olen;
 
-    if( ( ret = mbedtls_x509write_crt_der( crt, output_buf, sizeof(output_buf),
+    if( ( ret = mbedtls_x509write_crt_der( crt, buf, size,
                                    f_rng, p_rng ) ) < 0 )
     {
         return( ret );
     }
 
     if( ( ret = mbedtls_pem_write_buffer( PEM_BEGIN_CRT, PEM_END_CRT,
-                                  output_buf + sizeof(output_buf) - ret,
-                                  ret, buf, size, &olen ) ) != 0 )
+                                          buf + size - ret, ret,
+                                          buf, size, &olen ) ) != 0 )
     {
         return( ret );
     }
diff --git a/programs/CMakeLists.txt b/programs/CMakeLists.txt
index 4cdae78..2af4d11 100644
--- a/programs/CMakeLists.txt
+++ b/programs/CMakeLists.txt
@@ -6,3 +6,6 @@
 add_subdirectory(test)
 add_subdirectory(x509)
 add_subdirectory(util)
+if (NOT WIN32)
+    add_subdirectory(fuzz)
+endif()
diff --git a/programs/Makefile b/programs/Makefile
index 2cb7366..857be78 100644
--- a/programs/Makefile
+++ b/programs/Makefile
@@ -3,8 +3,8 @@
 # To compile with PKCS11: add "-lpkcs11-helper" to LDFLAGS
 
 CFLAGS	?= -O2
-WARNING_CFLAGS ?= -Wall -W -Wdeclaration-after-statement
-WARNING_CXXFLAGS ?= -Wall -W
+WARNING_CFLAGS ?= -Wall -Wextra
+WARNING_CXXFLAGS ?= -Wall -Wextra
 LDFLAGS ?=
 
 LOCAL_CFLAGS = $(WARNING_CFLAGS) -I../include -D_FILE_OFFSET_BITS=64
@@ -90,9 +90,18 @@
 
 .SILENT:
 
-.PHONY: all clean list
+.PHONY: all clean list fuzz
 
 all: $(APPS)
+ifndef WINDOWS
+# APPS doesn't include the fuzzing programs, which aren't "normal"
+# sample or test programs, and don't build with MSVC which is
+# warning about fopen
+all: fuzz
+endif
+
+fuzz:
+	$(MAKE) -C fuzz
 
 $(DEP):
 	$(MAKE) -C ../library
@@ -305,6 +314,7 @@
 else
 	del /S /Q /F *.o *.exe
 endif
+	$(MAKE) -C fuzz clean
 
 list:
 	echo $(APPS)
diff --git a/programs/fuzz/.gitignore b/programs/fuzz/.gitignore
new file mode 100644
index 0000000..6fcc004
--- /dev/null
+++ b/programs/fuzz/.gitignore
@@ -0,0 +1,10 @@
+*.o
+fuzz_client
+fuzz_dtlsclient
+fuzz_dtlsserver
+fuzz_privkey
+fuzz_pubkey
+fuzz_server
+fuzz_x509crl
+fuzz_x509crt
+fuzz_x509csr
diff --git a/programs/fuzz/CMakeLists.txt b/programs/fuzz/CMakeLists.txt
new file mode 100644
index 0000000..17ec3f6
--- /dev/null
+++ b/programs/fuzz/CMakeLists.txt
@@ -0,0 +1,80 @@
+set(libs
+    mbedtls
+)
+
+if(USE_PKCS11_HELPER_LIBRARY)
+    set(libs ${libs} pkcs11-helper)
+endif(USE_PKCS11_HELPER_LIBRARY)
+
+if(ENABLE_ZLIB_SUPPORT)
+    set(libs ${libs} ${ZLIB_LIBRARIES})
+endif(ENABLE_ZLIB_SUPPORT)
+
+find_library(FUZZINGENGINE_LIB FuzzingEngine)
+
+if(NOT FUZZINGENGINE_LIB)
+    add_executable(fuzz_x509csr fuzz_x509csr.c onefile.c)
+    target_link_libraries(fuzz_x509csr ${libs})
+
+    add_executable(fuzz_x509crl fuzz_x509crl.c onefile.c)
+    target_link_libraries(fuzz_x509crl ${libs})
+
+    add_executable(fuzz_x509crt fuzz_x509crt.c onefile.c)
+    target_link_libraries(fuzz_x509crt ${libs})
+
+    add_executable(fuzz_privkey fuzz_privkey.c onefile.c)
+    target_link_libraries(fuzz_privkey ${libs})
+
+    add_executable(fuzz_pubkey fuzz_pubkey.c onefile.c)
+    target_link_libraries(fuzz_pubkey ${libs})
+
+    add_executable(fuzz_client fuzz_client.c common.c onefile.c)
+    target_link_libraries(fuzz_client ${libs})
+
+    add_executable(fuzz_server fuzz_server.c common.c onefile.c)
+    target_link_libraries(fuzz_server ${libs})
+
+    add_executable(fuzz_dtlsclient fuzz_dtlsclient.c common.c onefile.c)
+    target_link_libraries(fuzz_dtlsclient ${libs})
+
+    add_executable(fuzz_dtlsserver fuzz_dtlsserver.c common.c onefile.c)
+    target_link_libraries(fuzz_dtlsserver ${libs})
+else()
+    project(fuzz CXX)
+
+    add_executable(fuzz_x509csr fuzz_x509csr.c)
+    target_link_libraries(fuzz_x509csr ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_x509csr PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_x509crl fuzz_x509crl.c)
+    target_link_libraries(fuzz_x509crl ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_x509crl PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_x509crt fuzz_x509crt.c)
+    target_link_libraries(fuzz_x509crt ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_x509crt PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_privkey fuzz_privkey.c)
+    target_link_libraries(fuzz_privkey ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_privkey PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_pubkey fuzz_pubkey.c)
+    target_link_libraries(fuzz_pubkey ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_pubkey PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_client fuzz_client.c common.c)
+    target_link_libraries(fuzz_client ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_client PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_server fuzz_server.c common.c)
+    target_link_libraries(fuzz_server ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_server PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_dtlsclient fuzz_dtlsclient.c common.c)
+    target_link_libraries(fuzz_dtlsclient ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_dtlsclient PROPERTIES LINKER_LANGUAGE CXX)
+
+    add_executable(fuzz_dtlsserver fuzz_dtlsserver.c common.c)
+    target_link_libraries(fuzz_dtlsserver ${libs} FuzzingEngine)
+    SET_TARGET_PROPERTIES(fuzz_dtlsserver PROPERTIES LINKER_LANGUAGE CXX)
+endif()
diff --git a/programs/fuzz/Makefile b/programs/fuzz/Makefile
new file mode 100644
index 0000000..f2195d1
--- /dev/null
+++ b/programs/fuzz/Makefile
@@ -0,0 +1,72 @@
+
+LOCAL_CFLAGS = -I../../include -D_FILE_OFFSET_BITS=64
+LOCAL_LDFLAGS = -L../../library			\
+		-lmbedtls$(SHARED_SUFFIX)	\
+		-lmbedx509$(SHARED_SUFFIX)	\
+		-lmbedcrypto$(SHARED_SUFFIX)
+
+LOCAL_LDFLAGS += -L../../crypto/library
+LOCAL_CFLAGS += -I../../crypto/include
+CRYPTO := ../../crypto/library/
+
+ifndef SHARED
+DEP=$(CRYPTO)libmbedcrypto.a ../../library/libmbedx509.a ../../library/libmbedtls.a
+else
+DEP=$(CRYPTO)libmbedcrypto.$(DLEXT) ../../library/libmbedx509.$(DLEXT) ../../library/libmbedtls.$(DLEXT)
+endif
+
+
+DLEXT ?= so
+EXEXT=
+SHARED_SUFFIX=
+# python2 for POSIX since FreeBSD has only python2 as default.
+PYTHON ?= python2
+
+# Zlib shared library extensions:
+ifdef ZLIB
+LOCAL_LDFLAGS += -lz
+endif
+
+ifdef FUZZINGENGINE
+LOCAL_LDFLAGS += -lFuzzingEngine
+endif
+
+# A test application is built for each suites/test_suite_*.data file.
+# Application name is same as .data file's base name and can be
+# constructed by stripping path 'suites/' and extension .data.
+APPS = $(basename $(wildcard fuzz_*.c))
+
+# Construct executable name by adding OS specific suffix $(EXEXT).
+BINARIES := $(addsuffix $(EXEXT),$(APPS))
+
+.SILENT:
+
+.PHONY: all check test clean
+
+all: $(BINARIES)
+
+$(DEP):
+	$(MAKE) -C ../../library
+
+C_FILES := $(addsuffix .c,$(APPS))
+
+%.o: %.c
+	$(CC) $(LOCAL_CFLAGS) $(CFLAGS) -c $<	-o $@
+
+
+ifdef FUZZINGENGINE
+$(BINARIES): %$(EXEXT): %.o common.o $(DEP)
+	echo " $(CC) common.o $< $(LOCAL_LDFLAGS) $(LDFLAGS) -o $@"
+	$(CXX) common.o $<	$(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
+else
+$(BINARIES): %$(EXEXT): %.o common.o onefile.o $(DEP)
+	echo " $(CC) common.o onefile.o $< $(LOCAL_LDFLAGS) $(LDFLAGS) -o $@"
+	$(CC) common.o onefile.o $<	$(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
+endif
+
+clean:
+ifndef WINDOWS
+	rm -rf $(BINARIES) *.o
+else
+	del /Q /F *.o *.exe
+endif
diff --git a/programs/fuzz/README.md b/programs/fuzz/README.md
new file mode 100644
index 0000000..8b24908
--- /dev/null
+++ b/programs/fuzz/README.md
@@ -0,0 +1,68 @@
+What is it?
+------
+
+This directory contains fuzz targets.
+Fuzz targets are simple codes using the library.
+They are used with a so-called fuzz driver, which will generate inputs, try to process them with the fuzz target, and alert in case of an unwanted behavior (such as a buffer overflow for instance).
+
+These targets were meant to be used with oss-fuzz but can be used in other contexts.
+
+This code was contributed by Philippe Antoine ( Catena cyber ).
+
+How to run?
+------
+
+To run the fuzz targets like oss-fuzz:
+```
+git clone https://github.com/google/oss-fuzz
+cd oss-fuzz
+python infra/helper.py build_image mbedtls
+python infra/helper.py build_fuzzers --sanitizer address mbedtls
+python infra/helper.py run_fuzzer mbedtls fuzz_client
+```
+You can use `undefined` sanitizer as well as `address` sanitizer.
+And you can run any of the fuzz targets like `fuzz_client`.
+
+To run the fuzz targets without oss-fuzz, you first need to install one libFuzzingEngine (libFuzzer for instance).
+Then you need to compile the code with the compiler flags of the wished sanitizer.
+```
+perl scripts/config.pl set MBEDTLS_PLATFORM_TIME_ALT
+mkdir build
+cd build
+cmake ..
+make
+```
+Finally, you can run the targets like `./test/fuzz/fuzz_client`.
+
+
+Corpus generation for network trafic targets
+------
+
+These targets use network trafic as inputs :
+* client : simulates a client against (fuzzed) server traffic
+* server : simulates a server against (fuzzed) client traffic
+* dtls_client
+* dtls_server
+
+They also use the last bytes as configuration options.
+
+To generate corpus for these targets, you can do the following, not fully automated steps :
+* Build mbedtls programs ssl_server2 and ssl_client2
+* Run them one against the other with `reproducible` option turned on while capturing trafic into test.pcap
+* Extract tcp payloads, for instance with tshark : `tshark -Tfields -e tcp.dstport -e tcp.payload -r test.pcap > test.txt`
+* Run a dummy python script to output either client or server corpus file like `python dummy.py test.txt > test.cor`
+* Finally, you can add the options by appending the last bytes to the file test.cor
+
+Here is an example of dummy.py for extracting payload from client to server (if we used `tcp.dstport` in tshark command)
+```
+import sys
+import binascii
+
+f = open(sys.argv[1])
+for l in f.readlines():
+    portAndPl=l.split()
+    if len(portAndPl) == 2:
+        # determine client or server based on port
+        if portAndPl[0] == "4433":
+            print(binascii.unhexlify(portAndPl[1].replace(":","")))
+```
diff --git a/programs/fuzz/common.c b/programs/fuzz/common.c
new file mode 100644
index 0000000..5e6c84c
--- /dev/null
+++ b/programs/fuzz/common.c
@@ -0,0 +1,91 @@
+#include "common.h"
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include "mbedtls/ctr_drbg.h"
+
+mbedtls_time_t dummy_constant_time( mbedtls_time_t* time )
+{
+    (void) time;
+    return 0x5af2a056;
+}
+
+void dummy_init()
+{
+#if defined(MBEDTLS_PLATFORM_TIME_ALT)
+    mbedtls_platform_set_time( dummy_constant_time );
+#else
+    fprintf(stderr, "Warning: fuzzing without constant time\n");
+#endif
+}
+
+int dummy_send( void *ctx, const unsigned char *buf, size_t len )
+{
+    //silence warning about unused parameter
+    (void) ctx;
+    (void) buf;
+
+    //pretends we wrote everything ok
+    if( len > INT_MAX ) {
+        return( -1 );
+    }
+    return( (int) len );
+}
+
+int fuzz_recv( void *ctx, unsigned char *buf, size_t len )
+{
+    //reads from the buffer from fuzzer
+    fuzzBufferOffset_t * biomemfuzz = (fuzzBufferOffset_t *) ctx;
+
+    if(biomemfuzz->Offset == biomemfuzz->Size) {
+        //EOF
+        return( 0 );
+    }
+    if( len > INT_MAX ) {
+        return( -1 );
+    }
+    if( len + biomemfuzz->Offset > biomemfuzz->Size ) {
+        //do not overflow
+        len = biomemfuzz->Size - biomemfuzz->Offset;
+    }
+    memcpy(buf, biomemfuzz->Data + biomemfuzz->Offset, len);
+    biomemfuzz->Offset += len;
+    return( (int) len );
+}
+
+int dummy_random( void *p_rng, unsigned char *output, size_t output_len )
+{
+    int ret;
+    size_t i;
+
+    //use mbedtls_ctr_drbg_random to find bugs in it
+    ret = mbedtls_ctr_drbg_random(p_rng, output, output_len);
+    for (i=0; i<output_len; i++) {
+        //replace result with pseudo random
+        output[i] = (unsigned char) rand();
+    }
+    return( ret );
+}
+
+int dummy_entropy( void *data, unsigned char *output, size_t len )
+{
+    size_t i;
+    (void) data;
+
+    //use mbedtls_entropy_func to find bugs in it
+    //test performance impact of entropy
+    //ret = mbedtls_entropy_func(data, output, len);
+    for (i=0; i<len; i++) {
+        //replace result with pseudo random
+        output[i] = (unsigned char) rand();
+    }
+    return( 0 );
+}
+
+int fuzz_recv_timeout( void *ctx, unsigned char *buf, size_t len,
+                      uint32_t timeout )
+{
+    (void) timeout;
+
+    return fuzz_recv(ctx, buf, len);
+}
diff --git a/programs/fuzz/common.h b/programs/fuzz/common.h
new file mode 100644
index 0000000..5586c06
--- /dev/null
+++ b/programs/fuzz/common.h
@@ -0,0 +1,19 @@
+#include "mbedtls/platform_time.h"
+#include <stdint.h>
+
+typedef struct fuzzBufferOffset
+{
+    const uint8_t *Data;
+    size_t Size;
+    size_t Offset;
+} fuzzBufferOffset_t;
+
+mbedtls_time_t dummy_constant_time( mbedtls_time_t* time );
+void dummy_init();
+
+int dummy_send( void *ctx, const unsigned char *buf, size_t len );
+int fuzz_recv( void *ctx, unsigned char *buf, size_t len );
+int dummy_random( void *p_rng, unsigned char *output, size_t output_len );
+int dummy_entropy( void *data, unsigned char *output, size_t len );
+int fuzz_recv_timeout( void *ctx, unsigned char *buf, size_t len,
+                      uint32_t timeout );
diff --git a/programs/fuzz/corpuses/client b/programs/fuzz/corpuses/client
new file mode 100644
index 0000000..48d0a67
--- /dev/null
+++ b/programs/fuzz/corpuses/client
Binary files differ
diff --git a/programs/fuzz/corpuses/dtlsclient b/programs/fuzz/corpuses/dtlsclient
new file mode 100644
index 0000000..87c3ca3
--- /dev/null
+++ b/programs/fuzz/corpuses/dtlsclient
Binary files differ
diff --git a/programs/fuzz/corpuses/dtlsserver b/programs/fuzz/corpuses/dtlsserver
new file mode 100644
index 0000000..7a7a117
--- /dev/null
+++ b/programs/fuzz/corpuses/dtlsserver
Binary files differ
diff --git a/programs/fuzz/corpuses/server b/programs/fuzz/corpuses/server
new file mode 100644
index 0000000..fbeb019
--- /dev/null
+++ b/programs/fuzz/corpuses/server
Binary files differ
diff --git a/programs/fuzz/fuzz_client.c b/programs/fuzz/fuzz_client.c
new file mode 100644
index 0000000..ca7a8ab
--- /dev/null
+++ b/programs/fuzz/fuzz_client.c
@@ -0,0 +1,173 @@
+#include "mbedtls/ssl.h"
+#include "mbedtls/entropy.h"
+#include "mbedtls/ctr_drbg.h"
+#include "mbedtls/certs.h"
+#include "common.h"
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+
+
+#ifdef MBEDTLS_SSL_CLI_C
+static int initialized = 0;
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+static mbedtls_x509_crt cacert;
+#endif
+const char *alpn_list[3];
+
+
+#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
+const unsigned char psk[] = {
+    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+};
+const char psk_id[] = "Client_identity";
+#endif
+
+const char *pers = "fuzz_client";
+#endif //MBEDTLS_SSL_CLI_C
+
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_SSL_CLI_C
+    int ret;
+    size_t len;
+    mbedtls_ssl_context ssl;
+    mbedtls_ssl_config conf;
+    mbedtls_ctr_drbg_context ctr_drbg;
+    mbedtls_entropy_context entropy;
+    unsigned char buf[4096];
+    fuzzBufferOffset_t biomemfuzz;
+    uint16_t options;
+
+    if (initialized == 0) {
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+        mbedtls_x509_crt_init( &cacert );
+        if (mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
+                                   mbedtls_test_cas_pem_len ) != 0)
+            return 1;
+#endif
+
+        alpn_list[0] = "HTTP";
+        alpn_list[1] = "fuzzalpn";
+        alpn_list[2] = NULL;
+
+        dummy_init();
+
+        initialized = 1;
+    }
+
+    //we take 1 byte as options input
+    if (Size < 2) {
+        return 0;
+    }
+    options = (Data[Size - 2] << 8) | Data[Size - 1];
+    //Avoid warnings if compile options imply no options
+    (void) options;
+
+    mbedtls_ssl_init( &ssl );
+    mbedtls_ssl_config_init( &conf );
+    mbedtls_ctr_drbg_init( &ctr_drbg );
+    mbedtls_entropy_init( &entropy );
+
+    if( mbedtls_ctr_drbg_seed( &ctr_drbg, dummy_entropy, &entropy,
+                              (const unsigned char *) pers, strlen( pers ) ) != 0 )
+        goto exit;
+
+    if( mbedtls_ssl_config_defaults( &conf,
+                                    MBEDTLS_SSL_IS_CLIENT,
+                                    MBEDTLS_SSL_TRANSPORT_STREAM,
+                                    MBEDTLS_SSL_PRESET_DEFAULT ) != 0 )
+        goto exit;
+
+#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
+    if (options & 2) {
+        mbedtls_ssl_conf_psk( &conf, psk, sizeof( psk ),
+                             (const unsigned char *) psk_id, sizeof( psk_id ) - 1 );
+    }
+#endif
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    if (options & 4) {
+        mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
+        mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_REQUIRED );
+    } else
+#endif
+    {
+        mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_NONE );
+    }
+#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
+    mbedtls_ssl_conf_truncated_hmac( &conf, (options & 8) ? MBEDTLS_SSL_TRUNC_HMAC_ENABLED : MBEDTLS_SSL_TRUNC_HMAC_DISABLED);
+#endif
+#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
+    mbedtls_ssl_conf_extended_master_secret( &conf, (options & 0x10) ? MBEDTLS_SSL_EXTENDED_MS_DISABLED : MBEDTLS_SSL_EXTENDED_MS_ENABLED);
+#endif
+#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    mbedtls_ssl_conf_encrypt_then_mac( &conf, (options & 0x20) ? MBEDTLS_SSL_ETM_DISABLED : MBEDTLS_SSL_ETM_ENABLED);
+#endif
+#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
+    mbedtls_ssl_conf_cbc_record_splitting( &conf, (options & 0x40) ? MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED : MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED );
+#endif
+#if defined(MBEDTLS_SSL_RENEGOTIATION)
+    mbedtls_ssl_conf_renegotiation( &conf, (options & 0x80) ? MBEDTLS_SSL_RENEGOTIATION_ENABLED : MBEDTLS_SSL_RENEGOTIATION_DISABLED );
+#endif
+#if defined(MBEDTLS_SSL_SESSION_TICKETS)
+    mbedtls_ssl_conf_session_tickets( &conf, (options & 0x100) ? MBEDTLS_SSL_SESSION_TICKETS_DISABLED : MBEDTLS_SSL_SESSION_TICKETS_ENABLED );
+#endif
+#if defined(MBEDTLS_SSL_ALPN)
+    if (options & 0x200) {
+        mbedtls_ssl_conf_alpn_protocols( &conf, alpn_list );
+    }
+#endif
+    //There may be other options to add :
+    // mbedtls_ssl_conf_cert_profile, mbedtls_ssl_conf_sig_hashes
+
+    srand(1);
+    mbedtls_ssl_conf_rng( &conf, dummy_random, &ctr_drbg );
+
+    if( mbedtls_ssl_setup( &ssl, &conf ) != 0 )
+        goto exit;
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    if ((options & 1) == 0) {
+        if( mbedtls_ssl_set_hostname( &ssl, "localhost" ) != 0 )
+            goto exit;
+    }
+#endif
+
+    biomemfuzz.Data = Data;
+    biomemfuzz.Size = Size-2;
+    biomemfuzz.Offset = 0;
+    mbedtls_ssl_set_bio( &ssl, &biomemfuzz, dummy_send, fuzz_recv, NULL );
+
+    ret = mbedtls_ssl_handshake( &ssl );
+    if( ret == 0 )
+    {
+        //keep reading data from server until the end
+        do
+        {
+            len = sizeof( buf ) - 1;
+            ret = mbedtls_ssl_read( &ssl, buf, len );
+
+            if( ret == MBEDTLS_ERR_SSL_WANT_READ )
+                continue;
+            else if( ret <= 0 )
+                //EOF or error
+                break;
+        }
+        while( 1 );
+    }
+
+exit:
+    mbedtls_entropy_free( &entropy );
+    mbedtls_ctr_drbg_free( &ctr_drbg );
+    mbedtls_ssl_config_free( &conf );
+    mbedtls_ssl_free( &ssl );
+
+#else
+    (void) Data;
+    (void) Size;
+#endif //MBEDTLS_SSL_CLI_C
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_client.options b/programs/fuzz/fuzz_client.options
new file mode 100644
index 0000000..4d7340f
--- /dev/null
+++ b/programs/fuzz/fuzz_client.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 1048575
diff --git a/programs/fuzz/fuzz_dtlsclient.c b/programs/fuzz/fuzz_dtlsclient.c
new file mode 100644
index 0000000..8197a64
--- /dev/null
+++ b/programs/fuzz/fuzz_dtlsclient.c
@@ -0,0 +1,116 @@
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include "common.h"
+#include "mbedtls/ssl.h"
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+#include "mbedtls/entropy.h"
+#include "mbedtls/ctr_drbg.h"
+#include "mbedtls/certs.h"
+#include "mbedtls/timing.h"
+
+
+#ifdef MBEDTLS_SSL_CLI_C
+static int initialized = 0;
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+static mbedtls_x509_crt cacert;
+#endif
+
+const char *pers = "fuzz_dtlsclient";
+#endif // MBEDTLS_SSL_CLI_C
+#endif // MBEDTLS_SSL_PROTO_DTLS
+
+
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#if defined(MBEDTLS_SSL_PROTO_DTLS) && defined(MBEDTLS_SSL_CLI_C)
+    int ret;
+    size_t len;
+    mbedtls_ssl_context ssl;
+    mbedtls_ssl_config conf;
+    mbedtls_ctr_drbg_context ctr_drbg;
+    mbedtls_entropy_context entropy;
+    mbedtls_timing_delay_context timer;
+    unsigned char buf[4096];
+    fuzzBufferOffset_t biomemfuzz;
+
+    if (initialized == 0) {
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+        mbedtls_x509_crt_init( &cacert );
+        if (mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
+                                   mbedtls_test_cas_pem_len ) != 0)
+            return 1;
+#endif
+        dummy_init();
+
+        initialized = 1;
+    }
+
+    mbedtls_ssl_init( &ssl );
+    mbedtls_ssl_config_init( &conf );
+    mbedtls_ctr_drbg_init( &ctr_drbg );
+    mbedtls_entropy_init( &entropy );
+
+    srand(1);
+    if( mbedtls_ctr_drbg_seed( &ctr_drbg, dummy_entropy, &entropy,
+                              (const unsigned char *) pers, strlen( pers ) ) != 0 )
+        goto exit;
+
+    if( mbedtls_ssl_config_defaults( &conf,
+                                    MBEDTLS_SSL_IS_CLIENT,
+                                    MBEDTLS_SSL_TRANSPORT_DATAGRAM,
+                                    MBEDTLS_SSL_PRESET_DEFAULT ) != 0 )
+        goto exit;
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
+#endif
+    mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_NONE );
+    mbedtls_ssl_conf_rng( &conf, dummy_random, &ctr_drbg );
+
+    if( mbedtls_ssl_setup( &ssl, &conf ) != 0 )
+        goto exit;
+
+    mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
+                             mbedtls_timing_get_delay );
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    if( mbedtls_ssl_set_hostname( &ssl, "localhost" ) != 0 )
+        goto exit;
+#endif
+
+    biomemfuzz.Data = Data;
+    biomemfuzz.Size = Size;
+    biomemfuzz.Offset = 0;
+    mbedtls_ssl_set_bio( &ssl, &biomemfuzz, dummy_send, fuzz_recv, fuzz_recv_timeout );
+
+    ret = mbedtls_ssl_handshake( &ssl );
+    if( ret == 0 )
+    {
+        //keep reading data from server until the end
+        do
+        {
+            len = sizeof( buf ) - 1;
+            ret = mbedtls_ssl_read( &ssl, buf, len );
+
+            if( ret == MBEDTLS_ERR_SSL_WANT_READ )
+                continue;
+            else if( ret <= 0 )
+                //EOF or error
+                break;
+        }
+        while( 1 );
+    }
+
+exit:
+    mbedtls_entropy_free( &entropy );
+    mbedtls_ctr_drbg_free( &ctr_drbg );
+    mbedtls_ssl_config_free( &conf );
+    mbedtls_ssl_free( &ssl );
+
+#else
+    (void) Data;
+    (void) Size;
+#endif
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_dtlsclient.options b/programs/fuzz/fuzz_dtlsclient.options
new file mode 100644
index 0000000..4d7340f
--- /dev/null
+++ b/programs/fuzz/fuzz_dtlsclient.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 1048575
diff --git a/programs/fuzz/fuzz_dtlsserver.c b/programs/fuzz/fuzz_dtlsserver.c
new file mode 100644
index 0000000..9e9fe8e
--- /dev/null
+++ b/programs/fuzz/fuzz_dtlsserver.c
@@ -0,0 +1,141 @@
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include "common.h"
+#include "mbedtls/ssl.h"
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+#include "mbedtls/entropy.h"
+#include "mbedtls/ctr_drbg.h"
+#include "mbedtls/certs.h"
+#include "mbedtls/timing.h"
+#include "mbedtls/ssl_cookie.h"
+
+
+#ifdef MBEDTLS_SSL_SRV_C
+const char *pers = "fuzz_dtlsserver";
+const unsigned char client_ip[4] = {0x7F, 0, 0, 1};
+static int initialized = 0;
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+static mbedtls_x509_crt srvcert;
+static mbedtls_pk_context pkey;
+#endif
+#endif // MBEDTLS_SSL_SRV_C
+#endif // MBEDTLS_SSL_PROTO_DTLS
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#if defined(MBEDTLS_SSL_PROTO_DTLS) && defined(MBEDTLS_SSL_SRV_C)
+    int ret;
+    size_t len;
+    mbedtls_ssl_context ssl;
+    mbedtls_ssl_config conf;
+    mbedtls_ctr_drbg_context ctr_drbg;
+    mbedtls_entropy_context entropy;
+    mbedtls_timing_delay_context timer;
+    mbedtls_ssl_cookie_ctx cookie_ctx;
+    unsigned char buf[4096];
+    fuzzBufferOffset_t biomemfuzz;
+
+    if (initialized == 0) {
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+        mbedtls_x509_crt_init( &srvcert );
+        mbedtls_pk_init( &pkey );
+        if (mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
+                                   mbedtls_test_srv_crt_len ) != 0)
+            return 1;
+        if (mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem,
+                                   mbedtls_test_cas_pem_len ) != 0)
+            return 1;
+        if (mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
+                                 mbedtls_test_srv_key_len, NULL, 0 ) != 0)
+            return 1;
+#endif
+        dummy_init();
+
+        initialized = 1;
+    }
+    mbedtls_ssl_init( &ssl );
+    mbedtls_ssl_config_init( &conf );
+    mbedtls_ctr_drbg_init( &ctr_drbg );
+    mbedtls_entropy_init( &entropy );
+    mbedtls_ssl_cookie_init( &cookie_ctx );
+
+    if( mbedtls_ctr_drbg_seed( &ctr_drbg, dummy_entropy, &entropy,
+                              (const unsigned char *) pers, strlen( pers ) ) != 0 )
+        goto exit;
+
+
+    if( mbedtls_ssl_config_defaults( &conf,
+                                    MBEDTLS_SSL_IS_SERVER,
+                                    MBEDTLS_SSL_TRANSPORT_DATAGRAM,
+                                    MBEDTLS_SSL_PRESET_DEFAULT ) != 0 )
+        goto exit;
+
+
+    srand(1);
+    mbedtls_ssl_conf_rng( &conf, dummy_random, &ctr_drbg );
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    mbedtls_ssl_conf_ca_chain( &conf, srvcert.next, NULL );
+    if( mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) != 0 )
+        goto exit;
+#endif
+
+    if( mbedtls_ssl_cookie_setup( &cookie_ctx, dummy_random, &ctr_drbg ) != 0 )
+        goto exit;
+
+    mbedtls_ssl_conf_dtls_cookies( &conf, mbedtls_ssl_cookie_write, mbedtls_ssl_cookie_check, &cookie_ctx );
+
+    if( mbedtls_ssl_setup( &ssl, &conf ) != 0 )
+        goto exit;
+
+    mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
+                             mbedtls_timing_get_delay );
+
+    biomemfuzz.Data = Data;
+    biomemfuzz.Size = Size;
+    biomemfuzz.Offset = 0;
+    mbedtls_ssl_set_bio( &ssl, &biomemfuzz, dummy_send, fuzz_recv, fuzz_recv_timeout );
+    if( mbedtls_ssl_set_client_transport_id( &ssl, client_ip, sizeof(client_ip) ) != 0 )
+        goto exit;
+
+    ret = mbedtls_ssl_handshake( &ssl );
+
+    if (ret == MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED) {
+        biomemfuzz.Offset = ssl.next_record_offset;
+        mbedtls_ssl_session_reset( &ssl );
+        mbedtls_ssl_set_bio( &ssl, &biomemfuzz, dummy_send, fuzz_recv, fuzz_recv_timeout );
+        if( mbedtls_ssl_set_client_transport_id( &ssl, client_ip, sizeof(client_ip) ) != 0 )
+            goto exit;
+
+        ret = mbedtls_ssl_handshake( &ssl );
+
+        if( ret == 0 )
+        {
+            //keep reading data from server until the end
+            do
+            {
+                len = sizeof( buf ) - 1;
+                ret = mbedtls_ssl_read( &ssl, buf, len );
+                if( ret == MBEDTLS_ERR_SSL_WANT_READ )
+                    continue;
+                else if( ret <= 0 )
+                    //EOF or error
+                    break;
+            }
+            while( 1 );
+        }
+    }
+
+exit:
+    mbedtls_ssl_cookie_free( &cookie_ctx );
+    mbedtls_entropy_free( &entropy );
+    mbedtls_ctr_drbg_free( &ctr_drbg );
+    mbedtls_ssl_config_free( &conf );
+    mbedtls_ssl_free( &ssl );
+
+#else
+    (void) Data;
+    (void) Size;
+#endif
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_dtlsserver.options b/programs/fuzz/fuzz_dtlsserver.options
new file mode 100644
index 0000000..4d7340f
--- /dev/null
+++ b/programs/fuzz/fuzz_dtlsserver.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 1048575
diff --git a/programs/fuzz/fuzz_privkey.c b/programs/fuzz/fuzz_privkey.c
new file mode 100644
index 0000000..533a647
--- /dev/null
+++ b/programs/fuzz/fuzz_privkey.c
@@ -0,0 +1,64 @@
+#include <stdint.h>
+#include "mbedtls/pk.h"
+
+//4 Kb should be enough for every bug ;-)
+#define MAX_LEN 0x1000
+
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_PK_PARSE_C
+    int ret;
+    mbedtls_pk_context pk;
+
+    if (Size > MAX_LEN) {
+        //only work on small inputs
+        Size = MAX_LEN;
+    }
+
+    mbedtls_pk_init( &pk );
+    ret = mbedtls_pk_parse_key( &pk, Data, Size, NULL, 0 );
+    if (ret == 0) {
+#if defined(MBEDTLS_RSA_C)
+        if( mbedtls_pk_get_type( &pk ) == MBEDTLS_PK_RSA )
+        {
+            mbedtls_mpi N, P, Q, D, E, DP, DQ, QP;
+            mbedtls_rsa_context *rsa;
+
+            mbedtls_mpi_init( &N ); mbedtls_mpi_init( &P ); mbedtls_mpi_init( &Q );
+            mbedtls_mpi_init( &D ); mbedtls_mpi_init( &E ); mbedtls_mpi_init( &DP );
+            mbedtls_mpi_init( &DQ ); mbedtls_mpi_init( &QP );
+
+            rsa = mbedtls_pk_rsa( pk );
+            mbedtls_rsa_export( rsa, &N, &P, &Q, &D, &E );
+            mbedtls_rsa_export_crt( rsa, &DP, &DQ, &QP );
+
+            mbedtls_mpi_free( &N ); mbedtls_mpi_free( &P ); mbedtls_mpi_free( &Q );
+            mbedtls_mpi_free( &D ); mbedtls_mpi_free( &E ); mbedtls_mpi_free( &DP );
+            mbedtls_mpi_free( &DQ ); mbedtls_mpi_free( &QP );
+        }
+        else
+#endif
+#if defined(MBEDTLS_ECP_C)
+        if( mbedtls_pk_get_type( &pk ) == MBEDTLS_PK_ECKEY )
+        {
+            mbedtls_ecp_keypair *ecp;
+
+            ecp = mbedtls_pk_ec( pk );
+            if (ecp) {
+                ret = 0;
+            }
+        }
+        else
+#endif
+            {
+                ret = 0;
+            }
+    }
+    mbedtls_pk_free( &pk );
+#else
+    (void) Data;
+    (void) Size;
+#endif //MBEDTLS_PK_PARSE_C
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_privkey.options b/programs/fuzz/fuzz_privkey.options
new file mode 100644
index 0000000..0824b19
--- /dev/null
+++ b/programs/fuzz/fuzz_privkey.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 65535
diff --git a/programs/fuzz/fuzz_pubkey.c b/programs/fuzz/fuzz_pubkey.c
new file mode 100644
index 0000000..df42f7d
--- /dev/null
+++ b/programs/fuzz/fuzz_pubkey.c
@@ -0,0 +1,57 @@
+#include <stdint.h>
+#include "mbedtls/pk.h"
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_PK_PARSE_C
+    int ret;
+    mbedtls_pk_context pk;
+
+    mbedtls_pk_init( &pk );
+    ret = mbedtls_pk_parse_public_key( &pk, Data, Size );
+    if (ret == 0) {
+#if defined(MBEDTLS_RSA_C)
+        if( mbedtls_pk_get_type( &pk ) == MBEDTLS_PK_RSA )
+        {
+            mbedtls_mpi N, P, Q, D, E, DP, DQ, QP;
+            mbedtls_rsa_context *rsa;
+
+            mbedtls_mpi_init( &N ); mbedtls_mpi_init( &P ); mbedtls_mpi_init( &Q );
+            mbedtls_mpi_init( &D ); mbedtls_mpi_init( &E ); mbedtls_mpi_init( &DP );
+            mbedtls_mpi_init( &DQ ); mbedtls_mpi_init( &QP );
+
+            rsa = mbedtls_pk_rsa( pk );
+            ret = mbedtls_rsa_export( rsa, &N, &P, &Q, &D, &E );
+            ret = mbedtls_rsa_export_crt( rsa, &DP, &DQ, &QP );
+
+            mbedtls_mpi_free( &N ); mbedtls_mpi_free( &P ); mbedtls_mpi_free( &Q );
+            mbedtls_mpi_free( &D ); mbedtls_mpi_free( &E ); mbedtls_mpi_free( &DP );
+            mbedtls_mpi_free( &DQ ); mbedtls_mpi_free( &QP );
+
+        }
+        else
+#endif
+#if defined(MBEDTLS_ECP_C)
+        if( mbedtls_pk_get_type( &pk ) == MBEDTLS_PK_ECKEY )
+        {
+            mbedtls_ecp_keypair *ecp;
+
+            ecp = mbedtls_pk_ec( pk );
+            //dummy use of value
+            if (ecp) {
+                ret = 0;
+            }
+        }
+        else
+#endif
+        {
+            ret = 0;
+        }
+    }
+    mbedtls_pk_free( &pk );
+#else
+    (void) Data;
+    (void) Size;
+#endif //MBEDTLS_PK_PARSE_C
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_pubkey.options b/programs/fuzz/fuzz_pubkey.options
new file mode 100644
index 0000000..0824b19
--- /dev/null
+++ b/programs/fuzz/fuzz_pubkey.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 65535
diff --git a/programs/fuzz/fuzz_server.c b/programs/fuzz/fuzz_server.c
new file mode 100644
index 0000000..7cb5922
--- /dev/null
+++ b/programs/fuzz/fuzz_server.c
@@ -0,0 +1,185 @@
+#include "mbedtls/ssl.h"
+#include "mbedtls/entropy.h"
+#include "mbedtls/ctr_drbg.h"
+#include "mbedtls/certs.h"
+#include "mbedtls/ssl_ticket.h"
+#include "common.h"
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+
+
+#ifdef MBEDTLS_SSL_SRV_C
+const char *pers = "fuzz_server";
+static int initialized = 0;
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+static mbedtls_x509_crt srvcert;
+static mbedtls_pk_context pkey;
+#endif
+const char *alpn_list[3];
+
+#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
+const unsigned char psk[] = {
+    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+};
+const char psk_id[] = "Client_identity";
+#endif
+#endif // MBEDTLS_SSL_SRV_C
+
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_SSL_SRV_C
+    int ret;
+    size_t len;
+    mbedtls_ssl_context ssl;
+    mbedtls_ssl_config conf;
+    mbedtls_ctr_drbg_context ctr_drbg;
+    mbedtls_entropy_context entropy;
+#if defined(MBEDTLS_SSL_SESSION_TICKETS)
+    mbedtls_ssl_ticket_context ticket_ctx;
+#endif
+    unsigned char buf[4096];
+    fuzzBufferOffset_t biomemfuzz;
+    uint8_t options;
+
+    //we take 1 byte as options input
+    if (Size < 1) {
+        return 0;
+    }
+    options = Data[Size - 1];
+
+    if (initialized == 0) {
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+        mbedtls_x509_crt_init( &srvcert );
+        mbedtls_pk_init( &pkey );
+        if (mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
+                                   mbedtls_test_srv_crt_len ) != 0)
+            return 1;
+        if (mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem,
+                                   mbedtls_test_cas_pem_len ) != 0)
+            return 1;
+        if (mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
+                                 mbedtls_test_srv_key_len, NULL, 0 ) != 0)
+            return 1;
+#endif
+
+        alpn_list[0] = "HTTP";
+        alpn_list[1] = "fuzzalpn";
+        alpn_list[2] = NULL;
+
+        dummy_init();
+
+        initialized = 1;
+    }
+    mbedtls_ssl_init( &ssl );
+    mbedtls_ssl_config_init( &conf );
+    mbedtls_ctr_drbg_init( &ctr_drbg );
+    mbedtls_entropy_init( &entropy );
+#if defined(MBEDTLS_SSL_SESSION_TICKETS)
+    mbedtls_ssl_ticket_init( &ticket_ctx );
+#endif
+
+    if( mbedtls_ctr_drbg_seed( &ctr_drbg, dummy_entropy, &entropy,
+                              (const unsigned char *) pers, strlen( pers ) ) != 0 )
+        goto exit;
+
+
+    if( mbedtls_ssl_config_defaults( &conf,
+                                    MBEDTLS_SSL_IS_SERVER,
+                                    MBEDTLS_SSL_TRANSPORT_STREAM,
+                                    MBEDTLS_SSL_PRESET_DEFAULT ) != 0 )
+        goto exit;
+
+    srand(1);
+    mbedtls_ssl_conf_rng( &conf, dummy_random, &ctr_drbg );
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C) && defined(MBEDTLS_PEM_PARSE_C)
+    mbedtls_ssl_conf_ca_chain( &conf, srvcert.next, NULL );
+    if( mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) != 0 )
+        goto exit;
+#endif
+
+    mbedtls_ssl_conf_cert_req_ca_list( &conf, (options & 0x1) ? MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED : MBEDTLS_SSL_CERT_REQ_CA_LIST_DISABLED );
+#if defined(MBEDTLS_SSL_ALPN)
+    if (options & 0x2) {
+        mbedtls_ssl_conf_alpn_protocols( &conf, alpn_list );
+    }
+#endif
+#if defined(MBEDTLS_SSL_SESSION_TICKETS)
+    if( options & 0x4 )
+    {
+        if( mbedtls_ssl_ticket_setup( &ticket_ctx,
+                                     dummy_random, &ctr_drbg,
+                                     MBEDTLS_CIPHER_AES_256_GCM,
+                                     86400 ) != 0 )
+            goto exit;
+
+        mbedtls_ssl_conf_session_tickets_cb( &conf,
+                                            mbedtls_ssl_ticket_write,
+                                            mbedtls_ssl_ticket_parse,
+                                            &ticket_ctx );
+    }
+#endif
+#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
+    mbedtls_ssl_conf_truncated_hmac( &conf, (options & 0x8) ? MBEDTLS_SSL_TRUNC_HMAC_ENABLED : MBEDTLS_SSL_TRUNC_HMAC_DISABLED);
+#endif
+#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
+    mbedtls_ssl_conf_extended_master_secret( &conf, (options & 0x10) ? MBEDTLS_SSL_EXTENDED_MS_DISABLED : MBEDTLS_SSL_EXTENDED_MS_ENABLED);
+#endif
+#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    mbedtls_ssl_conf_encrypt_then_mac( &conf, (options & 0x20) ? MBEDTLS_SSL_ETM_ENABLED : MBEDTLS_SSL_ETM_DISABLED);
+#endif
+#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
+    if (options & 0x40) {
+        mbedtls_ssl_conf_psk( &conf, psk, sizeof( psk ),
+                             (const unsigned char *) psk_id, sizeof( psk_id ) - 1 );
+    }
+#endif
+#if defined(MBEDTLS_SSL_RENEGOTIATION)
+    mbedtls_ssl_conf_renegotiation( &conf, (options & 0x80) ? MBEDTLS_SSL_RENEGOTIATION_ENABLED : MBEDTLS_SSL_RENEGOTIATION_DISABLED );
+#endif
+
+    if( mbedtls_ssl_setup( &ssl, &conf ) != 0 )
+        goto exit;
+
+    biomemfuzz.Data = Data;
+    biomemfuzz.Size = Size-1;
+    biomemfuzz.Offset = 0;
+    mbedtls_ssl_set_bio( &ssl, &biomemfuzz, dummy_send, fuzz_recv, NULL );
+
+    mbedtls_ssl_session_reset( &ssl );
+    ret = mbedtls_ssl_handshake( &ssl );
+    if( ret == 0 )
+    {
+        //keep reading data from server until the end
+        do
+        {
+            len = sizeof( buf ) - 1;
+            ret = mbedtls_ssl_read( &ssl, buf, len );
+
+            if( ret == MBEDTLS_ERR_SSL_WANT_READ )
+                continue;
+            else if( ret <= 0 )
+                //EOF or error
+                break;
+        }
+        while( 1 );
+    }
+
+exit:
+#if defined(MBEDTLS_SSL_SESSION_TICKETS)
+    mbedtls_ssl_ticket_free( &ticket_ctx );
+#endif
+    mbedtls_entropy_free( &entropy );
+    mbedtls_ctr_drbg_free( &ctr_drbg );
+    mbedtls_ssl_config_free( &conf );
+    mbedtls_ssl_free( &ssl );
+
+#else
+    (void) Data;
+    (void) Size;
+#endif //MBEDTLS_SSL_SRV_C
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_server.options b/programs/fuzz/fuzz_server.options
new file mode 100644
index 0000000..4d7340f
--- /dev/null
+++ b/programs/fuzz/fuzz_server.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 1048575
diff --git a/programs/fuzz/fuzz_x509crl.c b/programs/fuzz/fuzz_x509crl.c
new file mode 100644
index 0000000..02f521c
--- /dev/null
+++ b/programs/fuzz/fuzz_x509crl.c
@@ -0,0 +1,22 @@
+#include <stdint.h>
+#include "mbedtls/x509_crl.h"
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_X509_CRL_PARSE_C
+    int ret;
+    mbedtls_x509_crl crl;
+    unsigned char buf[4096];
+
+    mbedtls_x509_crl_init( &crl );
+    ret = mbedtls_x509_crl_parse( &crl, Data, Size );
+    if (ret == 0) {
+        ret = mbedtls_x509_crl_info( (char *) buf, sizeof( buf ) - 1, " ", &crl );
+    }
+    mbedtls_x509_crl_free( &crl );
+#else
+    (void) Data;
+    (void) Size;
+#endif
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_x509crl.options b/programs/fuzz/fuzz_x509crl.options
new file mode 100644
index 0000000..0824b19
--- /dev/null
+++ b/programs/fuzz/fuzz_x509crl.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 65535
diff --git a/programs/fuzz/fuzz_x509crt.c b/programs/fuzz/fuzz_x509crt.c
new file mode 100644
index 0000000..8f593a1
--- /dev/null
+++ b/programs/fuzz/fuzz_x509crt.c
@@ -0,0 +1,22 @@
+#include <stdint.h>
+#include "mbedtls/x509_crt.h"
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_X509_CRT_PARSE_C
+    int ret;
+    mbedtls_x509_crt crt;
+    unsigned char buf[4096];
+
+    mbedtls_x509_crt_init( &crt );
+    ret = mbedtls_x509_crt_parse( &crt, Data, Size );
+    if (ret == 0) {
+        ret = mbedtls_x509_crt_info( (char *) buf, sizeof( buf ) - 1, " ", &crt );
+    }
+    mbedtls_x509_crt_free( &crt );
+#else
+    (void) Data;
+    (void) Size;
+#endif
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_x509crt.options b/programs/fuzz/fuzz_x509crt.options
new file mode 100644
index 0000000..0824b19
--- /dev/null
+++ b/programs/fuzz/fuzz_x509crt.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 65535
diff --git a/programs/fuzz/fuzz_x509csr.c b/programs/fuzz/fuzz_x509csr.c
new file mode 100644
index 0000000..3cf28a6
--- /dev/null
+++ b/programs/fuzz/fuzz_x509csr.c
@@ -0,0 +1,22 @@
+#include <stdint.h>
+#include "mbedtls/x509_csr.h"
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) {
+#ifdef MBEDTLS_X509_CSR_PARSE_C
+    int ret;
+    mbedtls_x509_csr csr;
+    unsigned char buf[4096];
+
+    mbedtls_x509_csr_init( &csr );
+    ret = mbedtls_x509_csr_parse( &csr, Data, Size );
+    if (ret == 0) {
+        ret = mbedtls_x509_csr_info( (char *) buf, sizeof( buf ) - 1, " ", &csr );
+    }
+    mbedtls_x509_csr_free( &csr );
+#else
+    (void) Data;
+    (void) Size;
+#endif
+
+    return 0;
+}
diff --git a/programs/fuzz/fuzz_x509csr.options b/programs/fuzz/fuzz_x509csr.options
new file mode 100644
index 0000000..0824b19
--- /dev/null
+++ b/programs/fuzz/fuzz_x509csr.options
@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 65535
diff --git a/programs/fuzz/onefile.c b/programs/fuzz/onefile.c
new file mode 100644
index 0000000..9e3986d
--- /dev/null
+++ b/programs/fuzz/onefile.c
@@ -0,0 +1,53 @@
+#include <stdint.h>
+#include <stdlib.h>
+#include <stdio.h>
+// Get platform-specific definition
+#include "mbedtls/config.h"
+
+int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size);
+
+int main(int argc, char** argv)
+{
+    FILE * fp;
+    uint8_t *Data;
+    size_t Size;
+
+    if (argc != 2) {
+        return 1;
+    }
+    //opens the file, get its size, and reads it into a buffer
+    fp = fopen(argv[1], "rb");
+    if (fp == NULL) {
+        return 2;
+    }
+    if (fseek(fp, 0L, SEEK_END) != 0) {
+        fclose(fp);
+        return 2;
+    }
+    Size = ftell(fp);
+    if (Size == (size_t) -1) {
+        fclose(fp);
+        return 2;
+    }
+    if (fseek(fp, 0L, SEEK_SET) != 0) {
+        fclose(fp);
+        return 2;
+    }
+    Data = malloc(Size);
+    if (Data == NULL) {
+        fclose(fp);
+        return 2;
+    }
+    if (fread(Data, Size, 1, fp) != 1) {
+        free(Data);
+        fclose(fp);
+        return 2;
+    }
+
+    //lauch fuzzer
+    LLVMFuzzerTestOneInput(Data, Size);
+    free(Data);
+    fclose(fp);
+    return 0;
+}
+
diff --git a/programs/test/cmake_subproject/.gitignore b/programs/test/cmake_subproject/.gitignore
new file mode 100644
index 0000000..464833b
--- /dev/null
+++ b/programs/test/cmake_subproject/.gitignore
@@ -0,0 +1,3 @@
+build
+Makefile
+cmake_subproject
diff --git a/programs/test/cmake_subproject/CMakeLists.txt b/programs/test/cmake_subproject/CMakeLists.txt
new file mode 100644
index 0000000..f5f4191
--- /dev/null
+++ b/programs/test/cmake_subproject/CMakeLists.txt
@@ -0,0 +1,19 @@
+cmake_minimum_required(VERSION 2.6)
+
+# We use the parent Mbed TLS directory as the MBEDTLS_DIR for this test. Other
+# projects that use Mbed TLS as a subproject are likely to add by their own
+# relative paths.
+set(MBEDTLS_DIR ../../../)
+
+# Add Mbed TLS as a subdirectory.
+add_subdirectory(${MBEDTLS_DIR} build)
+
+# Link against all the Mbed TLS libraries.
+set(libs
+    mbedtls
+    mbedcrypto
+    mbedx509
+)
+
+add_executable(cmake_subproject cmake_subproject.c)
+target_link_libraries(cmake_subproject ${libs})
diff --git a/programs/test/cmake_subproject/cmake_subproject.c b/programs/test/cmake_subproject/cmake_subproject.c
new file mode 100644
index 0000000..ca899bc
--- /dev/null
+++ b/programs/test/cmake_subproject/cmake_subproject.c
@@ -0,0 +1,56 @@
+/*
+ *  Simple program to test that CMake builds with Mbed TLS as a subdirectory
+ *  work correctly.
+ *
+ *  Copyright (C) 2006-2019, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "mbedtls/config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#if defined(MBEDTLS_PLATFORM_C)
+#include "mbedtls/platform.h"
+#else
+#include <stdio.h>
+#include <stdlib.h>
+#define mbedtls_fprintf         fprintf
+#define mbedtls_printf          printf
+#define mbedtls_exit            exit
+#define MBEDTLS_EXIT_SUCCESS    EXIT_SUCCESS
+#define MBEDTLS_EXIT_FAILURE    EXIT_FAILURE
+#endif /* MBEDTLS_PLATFORM_C */
+
+#include "mbedtls/version.h"
+
+/* The main reason to build this is for testing the CMake build, so the program
+ * doesn't need to do very much. It calls a single library function to ensure
+ * linkage works, but that is all. */
+int main()
+{
+    /* This version string is 18 bytes long, as advised by version.h. */
+    char version[18];
+
+    mbedtls_version_get_string_full( version );
+
+    mbedtls_printf( "Built against %s\n", version );
+
+    return( 0 );
+}
diff --git a/scripts/abi_check.py b/scripts/abi_check.py
index 502c7ae..e19f2c0 100755
--- a/scripts/abi_check.py
+++ b/scripts/abi_check.py
@@ -59,9 +59,7 @@
 
     @staticmethod
     def check_repo_path():
-        current_dir = os.path.realpath('.')
-        root_dir = os.path.dirname(os.path.dirname(os.path.realpath(__file__)))
-        if current_dir != root_dir:
+        if not all(os.path.isdir(d) for d in ["include", "library", "tests"]):
             raise Exception("Must be run from Mbed TLS root")
 
     def _setup_logger(self):
@@ -108,6 +106,12 @@
             stderr=subprocess.STDOUT
         )
         self.log.debug(worktree_output.decode("utf-8"))
+        version.commit = subprocess.check_output(
+            [self.git_command, "rev-parse", "HEAD"],
+            cwd=git_worktree_path,
+            stderr=subprocess.STDOUT
+        ).decode("ascii").rstrip()
+        self.log.debug("Commit is {}".format(version.commit))
         return git_worktree_path
 
     def _update_git_submodules(self, git_worktree_path, version):
@@ -163,6 +167,13 @@
                     os.path.join(root, file)
                 )
 
+    @staticmethod
+    def _pretty_revision(version):
+        if version.revision == version.commit:
+            return version.revision
+        else:
+            return "{} ({})".format(version.revision, version.commit)
+
     def _get_abi_dumps_from_shared_libraries(self, version):
         """Generate the ABI dumps for the specified git revision.
         The shared libraries must have been built and the module paths
@@ -177,7 +188,7 @@
                 "abi-dumper",
                 module_path,
                 "-o", output_path,
-                "-lver", version.revision
+                "-lver", self._pretty_revision(version),
             ]
             abi_dump_output = subprocess.check_output(
                 abi_dump_command,
@@ -222,70 +233,84 @@
                 if not problems.getchildren():
                     report.remove(problems)
 
+    def _abi_compliance_command(self, mbed_module, output_path):
+        """Build the command to run to analyze the library mbed_module.
+        The report will be placed in output_path."""
+        abi_compliance_command = [
+            "abi-compliance-checker",
+            "-l", mbed_module,
+            "-old", self.old_version.abi_dumps[mbed_module],
+            "-new", self.new_version.abi_dumps[mbed_module],
+            "-strict",
+            "-report-path", output_path,
+        ]
+        if self.skip_file:
+            abi_compliance_command += ["-skip-symbols", self.skip_file,
+                                       "-skip-types", self.skip_file]
+        if self.brief:
+            abi_compliance_command += ["-report-format", "xml",
+                                       "-stdout"]
+        return abi_compliance_command
+
+    def _is_library_compatible(self, mbed_module, compatibility_report):
+        """Test if the library mbed_module has remained compatible.
+        Append a message regarding compatibility to compatibility_report."""
+        output_path = os.path.join(
+            self.report_dir, "{}-{}-{}.html".format(
+                mbed_module, self.old_version.revision,
+                self.new_version.revision
+            )
+        )
+        try:
+            subprocess.check_output(
+                self._abi_compliance_command(mbed_module, output_path),
+                stderr=subprocess.STDOUT
+            )
+        except subprocess.CalledProcessError as err:
+            if err.returncode != 1:
+                raise err
+            if self.brief:
+                self.log.info(
+                    "Compatibility issues found for {}".format(mbed_module)
+                )
+                report_root = ET.fromstring(err.output.decode("utf-8"))
+                self._remove_extra_detail_from_report(report_root)
+                self.log.info(ET.tostring(report_root).decode("utf-8"))
+            else:
+                self.can_remove_report_dir = False
+                compatibility_report.append(
+                    "Compatibility issues found for {}, "
+                    "for details see {}".format(mbed_module, output_path)
+                )
+            return False
+        compatibility_report.append(
+            "No compatibility issues for {}".format(mbed_module)
+        )
+        if not (self.keep_all_reports or self.brief):
+            os.remove(output_path)
+        return True
+
     def get_abi_compatibility_report(self):
         """Generate a report of the differences between the reference ABI
         and the new ABI. ABI dumps from self.old_version and self.new_version
         must be available."""
-        compatibility_report = ""
+        compatibility_report = ["Checking evolution from {} to {}".format(
+            self._pretty_revision(self.old_version),
+            self._pretty_revision(self.new_version)
+        )]
         compliance_return_code = 0
         shared_modules = list(set(self.old_version.modules.keys()) &
                               set(self.new_version.modules.keys()))
         for mbed_module in shared_modules:
-            output_path = os.path.join(
-                self.report_dir, "{}-{}-{}.html".format(
-                    mbed_module, self.old_version.revision,
-                    self.new_version.revision
-                )
-            )
-            abi_compliance_command = [
-                "abi-compliance-checker",
-                "-l", mbed_module,
-                "-old", self.old_version.abi_dumps[mbed_module],
-                "-new", self.new_version.abi_dumps[mbed_module],
-                "-strict",
-                "-report-path", output_path,
-            ]
-            if self.skip_file:
-                abi_compliance_command += ["-skip-symbols", self.skip_file,
-                                           "-skip-types", self.skip_file]
-            if self.brief:
-                abi_compliance_command += ["-report-format", "xml",
-                                           "-stdout"]
-            try:
-                subprocess.check_output(
-                    abi_compliance_command,
-                    stderr=subprocess.STDOUT
-                )
-            except subprocess.CalledProcessError as err:
-                if err.returncode == 1:
-                    compliance_return_code = 1
-                    if self.brief:
-                        self.log.info(
-                            "Compatibility issues found for {}".format(mbed_module)
-                        )
-                        report_root = ET.fromstring(err.output.decode("utf-8"))
-                        self._remove_extra_detail_from_report(report_root)
-                        self.log.info(ET.tostring(report_root).decode("utf-8"))
-                    else:
-                        self.can_remove_report_dir = False
-                        compatibility_report += (
-                            "Compatibility issues found for {}, "
-                            "for details see {}\n".format(mbed_module, output_path)
-                        )
-                else:
-                    raise err
-            else:
-                compatibility_report += (
-                    "No compatibility issues for {}\n".format(mbed_module)
-                )
-                if not (self.keep_all_reports or self.brief):
-                    os.remove(output_path)
+            if not self._is_library_compatible(mbed_module,
+                                               compatibility_report):
+                compliance_return_code = 1
         for version in [self.old_version, self.new_version]:
             for mbed_module, mbed_module_dump in version.abi_dumps.items():
                 os.remove(mbed_module_dump)
         if self.can_remove_report_dir:
             os.rmdir(self.report_dir)
-        self.log.info(compatibility_report)
+        self.log.info("\n".join(compatibility_report))
         return compliance_return_code
 
     def check_for_abi_changes(self):
@@ -357,7 +382,9 @@
         )
         parser.add_argument(
             "-s", "--skip-file", type=str,
-            help="path to file containing symbols and types to skip"
+            help=("path to file containing symbols and types to skip "
+                  "(typically \"-s identifiers\" after running "
+                  "\"tests/scripts/list-identifiers.sh --internal\")")
         )
         parser.add_argument(
             "-b", "--brief", action="store_true",
@@ -371,6 +398,7 @@
             version="old",
             repository=abi_args.old_repo,
             revision=abi_args.old_rev,
+            commit=None,
             crypto_repository=abi_args.old_crypto_repo,
             crypto_revision=abi_args.old_crypto_rev,
             abi_dumps={},
@@ -380,6 +408,7 @@
             version="new",
             repository=abi_args.new_repo,
             revision=abi_args.new_rev,
+            commit=None,
             crypto_repository=abi_args.new_crypto_repo,
             crypto_revision=abi_args.new_crypto_rev,
             abi_dumps={},
diff --git a/tests/Makefile b/tests/Makefile
index 27ce338..1679ee4 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -3,7 +3,7 @@
 # To compile with PKCS11: add "-lpkcs11-helper" to LDFLAGS
 
 CFLAGS	?= -O2
-WARNING_CFLAGS ?= -Wall -W -Wdeclaration-after-statement -Wunused
+WARNING_CFLAGS ?= -Wall -Wextra
 LDFLAGS ?=
 
 LOCAL_CFLAGS = $(WARNING_CFLAGS) -I../include -D_FILE_OFFSET_BITS=64
diff --git a/tests/compat-in-docker.sh b/tests/compat-in-docker.sh
new file mode 100755
index 0000000..67a0807
--- /dev/null
+++ b/tests/compat-in-docker.sh
@@ -0,0 +1,65 @@
+#!/bin/bash -eu
+
+# compat-in-docker.sh
+#
+# Purpose
+# -------
+# This runs compat.sh in a Docker container.
+#
+# Notes for users
+# ---------------
+# If OPENSSL_CMD, GNUTLS_CLI, or GNUTLS_SERV are specified the path must
+# correspond to an executable inside the Docker container. The special
+# values "next" (OpenSSL only) and "legacy" are also allowed as shorthand
+# for the installations inside the container.
+#
+# See also:
+# - scripts/docker_env.sh for general Docker prerequisites and other information.
+# - compat.sh for notes about invocation of that script.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+source tests/scripts/docker_env.sh
+
+case "${OPENSSL_CMD:-default}" in
+    "legacy")  export OPENSSL_CMD="/usr/local/openssl-1.0.1j/bin/openssl";;
+    "next")    export OPENSSL_CMD="/usr/local/openssl-1.1.1a/bin/openssl";;
+    *) ;;
+esac
+
+case "${GNUTLS_CLI:-default}" in
+    "legacy")  export GNUTLS_CLI="/usr/local/gnutls-3.3.8/bin/gnutls-cli";;
+    "next")  export GNUTLS_CLI="/usr/local/gnutls-3.6.5/bin/gnutls-cli";;
+    *) ;;
+esac
+
+case "${GNUTLS_SERV:-default}" in
+    "legacy")  export GNUTLS_SERV="/usr/local/gnutls-3.3.8/bin/gnutls-serv";;
+    "next")  export GNUTLS_SERV="/usr/local/gnutls-3.6.5/bin/gnutls-serv";;
+    *) ;;
+esac
+
+run_in_docker \
+    -e M_CLI \
+    -e M_SRV \
+    -e GNUTLS_CLI \
+    -e GNUTLS_SERV \
+    -e OPENSSL_CMD \
+    -e OSSL_NO_DTLS \
+    tests/compat.sh \
+    $@
diff --git a/tests/compat.sh b/tests/compat.sh
index 0eae1ea..80c2d31 100755
--- a/tests/compat.sh
+++ b/tests/compat.sh
@@ -15,6 +15,10 @@
 
 set -u
 
+# Limit the size of each log to 10 GiB, in case of failures with this script
+# where it may output seemingly unlimited length error logs.
+ulimit -f 20971520
+
 # initialise counters
 TESTS=0
 FAILED=0
diff --git a/tests/docker/bionic/Dockerfile b/tests/docker/bionic/Dockerfile
new file mode 100644
index 0000000..1b2d40f
--- /dev/null
+++ b/tests/docker/bionic/Dockerfile
@@ -0,0 +1,168 @@
+# Dockerfile
+#
+# Purpose
+# -------
+# Defines a Docker container suitable to build and run all tests (all.sh),
+# except for those that use a proprietary toolchain.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+ARG MAKEFLAGS_PARALLEL=""
+ARG MY_REGISTRY=
+
+FROM ${MY_REGISTRY}ubuntu:bionic
+
+
+ENV DEBIAN_FRONTEND noninteractive
+
+RUN apt-get update \
+    && apt-get -y install software-properties-common \
+    && rm -rf /var/lib/apt/lists
+
+RUN add-apt-repository -y ppa:team-gcc-arm-embedded/ppa
+
+RUN apt-get update \
+    && apt-get -y install \
+    # mbedtls build/test dependencies
+    build-essential \
+    clang \
+    cmake \
+    doxygen \
+    gcc-arm-none-eabi \
+    gcc-mingw-w64-i686 \
+    gcc-multilib \
+    g++-multilib \
+    gdb \
+    git \
+    graphviz \
+    lsof \
+    python \
+    python3-pip \
+    python3 \
+    pylint3 \
+    valgrind \
+    wget \
+    # libnettle build dependencies
+    libgmp-dev \
+    m4 \
+    pkg-config \
+    && rm -rf /var/lib/apt/lists/*
+
+# Build a static, legacy openssl from sources with sslv3 enabled
+# Based on https://gist.github.com/bmaupin/8caca3a1e8c3c5686141 (build-openssl.sh)
+# Note: openssl-1.0.2 and earlier has known build issues with parallel make.
+RUN cd /tmp \
+    && wget https://www.openssl.org/source/old/1.0.1/openssl-1.0.1j.tar.gz -qO- | tar xz \
+    && cd openssl-1.0.1j \
+    && ./config --openssldir=/usr/local/openssl-1.0.1j no-shared \
+    && (make ${MAKEFLAGS_PARALLEL} || make -j 1) \
+    && make install_sw \
+    && rm -rf /tmp/openssl*
+ENV OPENSSL_LEGACY=/usr/local/openssl-1.0.1j/bin/openssl
+
+# Build OPENSSL as 1.0.2g
+RUN cd /tmp \
+    && wget https://www.openssl.org/source/old/1.0.2/openssl-1.0.2g.tar.gz -qO- | tar xz \
+    && cd openssl-1.0.2g \
+    && ./config --openssldir=/usr/local/openssl-1.0.2g no-shared \
+    && (make ${MAKEFLAGS_PARALLEL} || make -j 1) \
+    && make install_sw \
+    && rm -rf /tmp/openssl*
+ENV OPENSSL=/usr/local/openssl-1.0.2g/bin/openssl
+
+# Build a new openssl binary for ARIA/CHACHA20 support
+# Based on https://gist.github.com/bmaupin/8caca3a1e8c3c5686141 (build-openssl.sh)
+RUN cd /tmp \
+    && wget https://www.openssl.org/source/openssl-1.1.1a.tar.gz -qO- | tar xz \
+    && cd openssl-1.1.1a \
+    && ./config --prefix=/usr/local/openssl-1.1.1a -Wl,--enable-new-dtags,-rpath,'${LIBRPATH}' no-shared \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install_sw \
+    && rm -rf /tmp/openssl*
+ENV OPENSSL_NEXT=/usr/local/openssl-1.1.1a/bin/openssl
+
+# Build libnettle 2.7.1 (needed by legacy gnutls)
+RUN cd /tmp \
+    && wget https://ftp.gnu.org/gnu/nettle/nettle-2.7.1.tar.gz -qO- | tar xz \
+    && cd nettle-2.7.1 \
+    && ./configure --disable-documentation \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && /sbin/ldconfig \
+    && rm -rf /tmp/nettle*
+
+# Build legacy gnutls (3.3.8)
+RUN cd /tmp \
+    && wget https://www.gnupg.org/ftp/gcrypt/gnutls/v3.3/gnutls-3.3.8.tar.xz -qO- | tar xJ \
+    && cd gnutls-3.3.8 \
+    && ./configure --prefix=/usr/local/gnutls-3.3.8 --exec_prefix=/usr/local/gnutls-3.3.8 --disable-shared --disable-guile --disable-doc \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && rm -rf /tmp/gnutls*
+ENV GNUTLS_LEGACY_CLI=/usr/local/gnutls-3.3.8/bin/gnutls-cli
+ENV GNUTLS_LEGACY_SERV=/usr/local/gnutls-3.3.8/bin/gnutls-serv
+
+# Build libnettle 3.1 (needed by gnutls)
+RUN cd /tmp \
+    && wget https://ftp.gnu.org/gnu/nettle/nettle-3.1.tar.gz -qO- | tar xz \
+    && cd nettle-3.1 \
+    && ./configure --disable-documentation \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && /sbin/ldconfig \
+    && rm -rf /tmp/nettle*
+
+# Build gnutls (3.4.10)
+RUN cd /tmp \
+    && wget https://www.gnupg.org/ftp/gcrypt/gnutls/v3.4/gnutls-3.4.10.tar.xz -qO- | tar xJ \
+    && cd gnutls-3.4.10 \
+    && ./configure --prefix=/usr/local/gnutls-3.4.10 --exec_prefix=/usr/local/gnutls-3.4.10 \
+        --with-included-libtasn1 --without-p11-kit \
+        --disable-shared --disable-guile --disable-doc \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && rm -rf /tmp/gnutls*
+ENV GNUTLS_CLI=/usr/local/gnutls-3.4.10/bin/gnutls-cli
+ENV GNUTLS_SERV=/usr/local/gnutls-3.4.10/bin/gnutls-serv
+
+# Build libnettle 3.4 (needed by gnutls next)
+RUN cd /tmp \
+    && wget https://ftp.gnu.org/gnu/nettle/nettle-3.4.1.tar.gz -qO- | tar xz \
+    && cd nettle-3.4.1 \
+    && ./configure --disable-documentation \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && /sbin/ldconfig \
+    && rm -rf /tmp/nettle*
+
+# Build gnutls next (3.6.5)
+RUN cd /tmp \
+    && wget https://www.gnupg.org/ftp/gcrypt/gnutls/v3.6/gnutls-3.6.5.tar.xz -qO- | tar xJ \
+    && cd gnutls-3.6.5 \
+    && ./configure --prefix=/usr/local/gnutls-3.6.5 --exec_prefix=/usr/local/gnutls-3.6.5 \
+        --with-included-libtasn1 --with-included-unistring --without-p11-kit \
+        --disable-shared --disable-guile --disable-doc \
+    && make ${MAKEFLAGS_PARALLEL} \
+    && make install \
+    && rm -rf /tmp/gnutls*
+
+ENV GNUTLS_NEXT_CLI=/usr/local/gnutls-3.6.5/bin/gnutls-cli
+ENV GNUTLS_NEXT_SERV=/usr/local/gnutls-3.6.5/bin/gnutls-serv
+
+RUN pip3 install --no-cache-dir \
+    mbed-host-tests \
+    mock
diff --git a/tests/make-in-docker.sh b/tests/make-in-docker.sh
new file mode 100755
index 0000000..4fbfe1c
--- /dev/null
+++ b/tests/make-in-docker.sh
@@ -0,0 +1,31 @@
+#!/bin/bash -eu
+
+# make-in-docker.sh
+#
+# Purpose
+# -------
+# This runs make in a Docker container.
+#
+# See also:
+# - scripts/docker_env.sh for general Docker prerequisites and other information.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+source tests/scripts/docker_env.sh
+
+run_in_docker make $@
diff --git a/tests/scripts/all-in-docker.sh b/tests/scripts/all-in-docker.sh
new file mode 100755
index 0000000..ee9a092
--- /dev/null
+++ b/tests/scripts/all-in-docker.sh
@@ -0,0 +1,37 @@
+#!/bin/bash -eu
+
+# all-in-docker.sh
+#
+# Purpose
+# -------
+# This runs all.sh (except for armcc) in a Docker container.
+#
+# Notes for users
+# ---------------
+# See docker_env.sh for prerequisites and other information.
+#
+# See also all.sh for notes about invocation of that script.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+source tests/scripts/docker_env.sh
+
+# Run tests that are possible with openly available compilers
+run_in_docker tests/scripts/all.sh \
+    --no-armcc \
+    $@
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 9d628f8..22c8129 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -24,7 +24,8 @@
 # configurations, and can and will arbitrarily change the current CMake
 # configuration. The following files must be committed into git:
 #    * include/mbedtls/config.h
-#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile
+#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
+#      programs/fuzz/Makefile
 # After running this script, the CMake cache will be lost and CMake
 # will no longer be initialised.
 #
@@ -75,9 +76,9 @@
 # * Run `make clean`.
 # * Restore `include/mbedtks/config.h` from a backup made before running
 #   the component.
-# * Check out `Makefile`, `library/Makefile`, `programs/Makefile` and
-#   `tests/Makefile` from git. This cleans up after an in-tree use of
-#   CMake.
+# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
+#   `tests/Makefile` and `programs/fuzz/Makefile` from git.
+#   This cleans up after an in-tree use of CMake.
 #
 # Any command that is expected to fail must be protected so that the
 # script keeps running in --keep-going mode despite `set -e`. In keep-going
@@ -234,14 +235,19 @@
               -iname CMakeCache.txt \) -exec rm {} \+
     # Recover files overwritten by in-tree CMake builds
     rm -f include/Makefile include/mbedtls/Makefile programs/*/Makefile
-    git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile
-    git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile
+    git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
+    git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
     cd crypto
     rm -f include/Makefile include/mbedtls/Makefile programs/*/Makefile
     git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile
     git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile
     cd ..
 
+    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
+    rm -rf programs/test/cmake_subproject/build
+    rm -f programs/test/cmake_subproject/Makefile
+    rm -f programs/test/cmake_subproject/cmake_subproject
+
     if [ -f "$CONFIG_BAK" ]; then
         mv "$CONFIG_BAK" "$CONFIG_H"
     fi
@@ -819,7 +825,7 @@
     msg "build: cmake, full config + MBEDTLS_USE_PSA_CRYPTO, ASan"
     scripts/config.pl full
     scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
-    scripts/config.pl unset MBEDTLS_ECP_RESTARTABLE  # restartable ECC not supported through PSA
+    scripts/config.pl set MBEDTLS_ECP_RESTARTABLE  # not using PSA, so enable restartable ECC
     scripts/config.pl set MBEDTLS_PSA_CRYPTO_C
     scripts/config.pl unset MBEDTLS_USE_PSA_CRYPTO
     scripts/config.pl unset MBEDTLS_PSA_ITS_FILE_C
@@ -1030,7 +1036,7 @@
     # Build once with -O0, to compile out the i386 specific inline assembly
     msg "build: i386, make, gcc -O0 (ASan build)" # ~ 30s
     scripts/config.pl full
-    make CC=gcc CFLAGS='-O0 -Werror -Wall -Wextra -m32 -fsanitize=address' LDFLAGS='-m32'
+    make CC=gcc CFLAGS='-O0 -Werror -Wall -Wextra -m32 -fsanitize=address' LDFLAGS='-m32 -fsanitize=address'
 
     msg "test: i386, make, gcc -O0 (ASan build)"
     make test
@@ -1049,7 +1055,7 @@
     scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE
     scripts/config.pl unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
     scripts/config.pl unset MBEDTLS_MEMORY_DEBUG
-    make CC=gcc CFLAGS='-O1 -Werror -Wall -Wextra -m32 -fsanitize=address' LDFLAGS='-m32'
+    make CC=gcc CFLAGS='-O1 -Werror -Wall -Wextra -m32 -fsanitize=address' LDFLAGS='-m32 -fsanitize=address'
 
     msg "test: i386, make, gcc -O1 (ASan build)"
     make test
@@ -1219,6 +1225,19 @@
     unset MBEDTLS_ROOT_DIR
 }
 
+component_test_cmake_as_subdirectory () {
+    msg "build: cmake 'as-subdirectory' build"
+    MBEDTLS_ROOT_DIR="$PWD"
+
+    cd programs/test/cmake_subproject
+    cmake .
+    make
+    if_build_succeeded ./cmake_subproject
+
+    cd "$MBEDTLS_ROOT_DIR"
+    unset MBEDTLS_ROOT_DIR
+}
+
 component_test_zeroize () {
     # Test that the function mbedtls_platform_zeroize() is not optimized away by
     # different combinations of compilers and optimization flags by using an
diff --git a/tests/scripts/basic-build-test.sh b/tests/scripts/basic-build-test.sh
index 2c9deb9..4b71ff6 100755
--- a/tests/scripts/basic-build-test.sh
+++ b/tests/scripts/basic-build-test.sh
@@ -64,6 +64,7 @@
 
 # Step 1 - Make and instrumented build for code coverage
 export CFLAGS=' --coverage -g3 -O0 '
+export LDFLAGS=' --coverage'
 make clean
 cp "$CONFIG_H" "$CONFIG_BAK"
 scripts/config.pl full
diff --git a/tests/scripts/basic-in-docker.sh b/tests/scripts/basic-in-docker.sh
new file mode 100755
index 0000000..37ed5ea
--- /dev/null
+++ b/tests/scripts/basic-in-docker.sh
@@ -0,0 +1,50 @@
+#!/bin/bash -eu
+
+# basic-in-docker.sh
+#
+# Purpose
+# -------
+# This runs a rough equivalent of the travis.yml in a Docker container.
+# The tests are run for both clang and gcc.
+#
+# Notes for users
+# ---------------
+# See docker_env.sh for prerequisites and other information.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+source tests/scripts/docker_env.sh
+
+run_in_docker tests/scripts/recursion.pl library/*.c
+run_in_docker tests/scripts/check-generated-files.sh
+run_in_docker tests/scripts/check-doxy-blocks.pl
+run_in_docker tests/scripts/check-names.sh
+run_in_docker tests/scripts/check-files.py
+run_in_docker tests/scripts/doxygen.sh
+
+for compiler in clang gcc; do
+    run_in_docker -e CC=${compiler} cmake -D CMAKE_BUILD_TYPE:String="Check" .
+    run_in_docker -e CC=${compiler} make
+    run_in_docker -e CC=${compiler} make test
+    run_in_docker programs/test/selftest
+    run_in_docker -e OSSL_NO_DTLS=1 tests/compat.sh
+    run_in_docker tests/ssl-opt.sh -e '\(DTLS\|SCSV\).*openssl'
+    run_in_docker tests/scripts/test-ref-configs.pl
+    run_in_docker tests/scripts/curves.pl
+    run_in_docker tests/scripts/key-exchanges.pl
+done
diff --git a/tests/scripts/check-files.py b/tests/scripts/check-files.py
index 00fd0ed..255bed8 100755
--- a/tests/scripts/check-files.py
+++ b/tests/scripts/check-files.py
@@ -1,14 +1,12 @@
 #!/usr/bin/env python3
+
+# This file is part of Mbed TLS (https://tls.mbed.org)
+# Copyright (c) 2018, Arm Limited, All Rights Reserved
+
 """
-This file is part of Mbed TLS (https://tls.mbed.org)
-
-Copyright (c) 2018, Arm Limited, All Rights Reserved
-
-Purpose
-
 This script checks the current state of the source code for minor issues,
 including incorrect file permissions, presence of tabs, non-Unix line endings,
-trailing whitespace, presence of UTF-8 BOM, and TODO comments.
+trailing whitespace, and presence of UTF-8 BOM.
 Note: requires python 3, must be run from Mbed TLS root.
 """
 
@@ -170,19 +168,6 @@
             return True
         return False
 
-class TodoIssueTracker(LineIssueTracker):
-    """Track lines containing ``TODO``."""
-
-    heading = "TODO present:"
-    files_exemptions = frozenset([
-        os.path.basename(__file__),
-        "benchmark.c",
-        "pull_request_template.md",
-    ])
-
-    def issue_with_line(self, line, _filepath):
-        return b"todo" in line.lower()
-
 
 class IntegrityChecker(object):
     """Sanity-check files under the current directory."""
@@ -211,7 +196,6 @@
             TrailingWhitespaceIssueTracker(),
             TabIssueTracker(),
             MergeArtifactIssueTracker(),
-            TodoIssueTracker(),
         ]
 
     @staticmethod
@@ -257,15 +241,7 @@
 
 
 def run_main():
-    parser = argparse.ArgumentParser(
-        description=(
-            "This script checks the current state of the source code for "
-            "minor issues, including incorrect file permissions, "
-            "presence of tabs, non-Unix line endings, trailing whitespace, "
-            "presence of UTF-8 BOM, and TODO comments. "
-            "Note: requires python 3, must be run from Mbed TLS root."
-        )
-    )
+    parser = argparse.ArgumentParser(description=__doc__)
     parser.add_argument(
         "-l", "--log_file", type=str, help="path to optional output log",
     )
diff --git a/tests/scripts/docker_env.sh b/tests/scripts/docker_env.sh
new file mode 100755
index 0000000..8bdc425
--- /dev/null
+++ b/tests/scripts/docker_env.sh
@@ -0,0 +1,93 @@
+#!/bin/bash -eu
+
+# docker_env.sh
+#
+# Purpose
+# -------
+#
+# This is a helper script to enable running tests under a Docker container,
+# thus making it easier to get set up as well as isolating test dependencies
+# (which include legacy/insecure configurations of openssl and gnutls).
+#
+# Notes for users
+# ---------------
+# This script expects a Linux x86_64 system with a recent version of Docker
+# installed and available for use, as well as http/https access. If a proxy
+# server must be used, invoke this script with the usual environment variables
+# (http_proxy and https_proxy) set appropriately. If an alternate Docker
+# registry is needed, specify MBEDTLS_DOCKER_REGISTRY to point at the
+# host name.
+#
+#
+# Running this script directly will check for Docker availability and set up
+# the Docker image.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+
+# default values, can be overridden by the environment
+: ${MBEDTLS_DOCKER_GUEST:=bionic}
+
+
+DOCKER_IMAGE_TAG="armmbed/mbedtls-test:${MBEDTLS_DOCKER_GUEST}"
+
+# Make sure docker is available
+if ! which docker > /dev/null; then
+    echo "Docker is required but doesn't seem to be installed. See https://www.docker.com/ to get started"
+    exit 1
+fi
+
+# Figure out if we need to 'sudo docker'
+if groups | grep docker > /dev/null; then
+    DOCKER="docker"
+else
+    echo "Using sudo to invoke docker since you're not a member of the docker group..."
+    DOCKER="sudo docker"
+fi
+
+# Build the Docker image
+echo "Getting docker image up to date (this may take a few minutes)..."
+${DOCKER} image build \
+    -t ${DOCKER_IMAGE_TAG} \
+    --cache-from=${DOCKER_IMAGE_TAG} \
+    --build-arg MAKEFLAGS_PARALLEL="-j $(nproc)" \
+    --network host \
+    ${http_proxy+--build-arg http_proxy=${http_proxy}} \
+    ${https_proxy+--build-arg https_proxy=${https_proxy}} \
+    ${MBEDTLS_DOCKER_REGISTRY+--build-arg MY_REGISTRY="${MBEDTLS_DOCKER_REGISTRY}/"} \
+    tests/docker/${MBEDTLS_DOCKER_GUEST}
+
+run_in_docker()
+{
+    ENV_ARGS=""
+    while [ "$1" == "-e" ]; do
+        ENV_ARGS="${ENV_ARGS} $1 $2"
+        shift 2
+    done
+
+    ${DOCKER} container run -it --rm \
+        --cap-add SYS_PTRACE \
+        --user "$(id -u):$(id -g)" \
+        --volume $PWD:$PWD \
+        --workdir $PWD \
+        -e MAKEFLAGS \
+        -e PYLINTHOME=/tmp/.pylintd \
+        ${ENV_ARGS} \
+        ${DOCKER_IMAGE_TAG} \
+        $@
+}
diff --git a/tests/scripts/mbedtls_test.py b/tests/scripts/mbedtls_test.py
index ac2912d..6ac68a4 100755
--- a/tests/scripts/mbedtls_test.py
+++ b/tests/scripts/mbedtls_test.py
@@ -79,7 +79,7 @@
         split_colon_fn = lambda x: re.sub(r'\\' + split_char, split_char, x)
         if len(split_char) > 1:
             raise ValueError('Expected split character. Found string!')
-        out = map(split_colon_fn, re.split(r'(?<!\\)' + split_char, inp_str))
+        out = list(map(split_colon_fn, re.split(r'(?<!\\)' + split_char, inp_str)))
         out = [x for x in out if x]
         return out
 
@@ -99,11 +99,11 @@
 
             # Check dependencies
             dependencies = []
-            line = data_f.next().strip()
+            line = next(data_f).strip()
             match = re.search('depends_on:(.*)', line)
             if match:
                 dependencies = [int(x) for x in match.group(1).split(':')]
-                line = data_f.next().strip()
+                line = next(data_f).strip()
 
             # Read test vectors
             line = line.replace('\\n', '\n')
@@ -115,7 +115,7 @@
                 err_str_fmt = "Number of test arguments({}) should be even: {}"
                 raise TestDataParserError(err_str_fmt.format(args_count, line))
             grouped_args = [(args[i * 2], args[(i * 2) + 1])
-                            for i in range(len(args)/2)]
+                            for i in range(int(len(args)/2))]
             self.tests.append((name, function_name, dependencies,
                                grouped_args))
 
@@ -261,21 +261,21 @@
         data_bytes += bytearray([function_id, len(parameters)])
         for typ, param in parameters:
             if typ == 'int' or typ == 'exp':
-                i = int(param)
-                data_bytes += 'I' if typ == 'int' else 'E'
+                i = int(param, 0)
+                data_bytes += b'I' if typ == 'int' else b'E'
                 self.align_32bit(data_bytes)
                 data_bytes += self.int32_to_big_endian_bytes(i)
             elif typ == 'char*':
                 param = param.strip('"')
                 i = len(param) + 1  # + 1 for null termination
-                data_bytes += 'S'
+                data_bytes += b'S'
                 self.align_32bit(data_bytes)
                 data_bytes += self.int32_to_big_endian_bytes(i)
-                data_bytes += bytearray(list(param))
-                data_bytes += '\0'   # Null terminate
+                data_bytes += bytearray(param, encoding='ascii')
+                data_bytes += b'\0'   # Null terminate
             elif typ == 'hex':
                 binary_data = self.hex_str_bytes(param)
-                data_bytes += 'H'
+                data_bytes += b'H'
                 self.align_32bit(data_bytes)
                 i = len(binary_data)
                 data_bytes += self.int32_to_big_endian_bytes(i)
@@ -310,7 +310,7 @@
 
         param_bytes, length = self.test_vector_to_bytes(function_id,
                                                         dependencies, args)
-        self.send_kv(length, param_bytes)
+        self.send_kv(''.join('{:02x}'.format(x) for x in length), ''.join('{:02x}'.format(x) for x in param_bytes))
 
     @staticmethod
     def get_result(value):
diff --git a/tests/ssl-opt-in-docker.sh b/tests/ssl-opt-in-docker.sh
new file mode 100755
index 0000000..e6e469d
--- /dev/null
+++ b/tests/ssl-opt-in-docker.sh
@@ -0,0 +1,65 @@
+#!/bin/bash -eu
+
+# ssl-opt-in-docker.sh
+#
+# Purpose
+# -------
+# This runs ssl-opt.sh in a Docker container.
+#
+# Notes for users
+# ---------------
+# If OPENSSL_CMD, GNUTLS_CLI, or GNUTLS_SERV are specified, the path must
+# correspond to an executable inside the Docker container. The special
+# values "next" and "legacy" are also allowed as shorthand for the
+# installations inside the container.
+#
+# See also:
+# - scripts/docker_env.sh for general Docker prerequisites and other information.
+# - ssl-opt.sh for notes about invocation of that script.
+
+# Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This file is part of Mbed TLS (https://tls.mbed.org)
+
+source tests/scripts/docker_env.sh
+
+case "${OPENSSL_CMD:-default}" in
+    "legacy")  export OPENSSL_CMD="/usr/local/openssl-1.0.1j/bin/openssl";;
+    "next")    export OPENSSL_CMD="/usr/local/openssl-1.1.1a/bin/openssl";;
+    *) ;;
+esac
+
+case "${GNUTLS_CLI:-default}" in
+    "legacy")  export GNUTLS_CLI="/usr/local/gnutls-3.3.8/bin/gnutls-cli";;
+    "next")  export GNUTLS_CLI="/usr/local/gnutls-3.6.5/bin/gnutls-cli";;
+    *) ;;
+esac
+
+case "${GNUTLS_SERV:-default}" in
+    "legacy")  export GNUTLS_SERV="/usr/local/gnutls-3.3.8/bin/gnutls-serv";;
+    "next")  export GNUTLS_SERV="/usr/local/gnutls-3.6.5/bin/gnutls-serv";;
+    *) ;;
+esac
+
+run_in_docker \
+    -e P_SRV \
+    -e P_CLI \
+    -e P_PXY \
+    -e GNUTLS_CLI \
+    -e GNUTLS_SERV \
+    -e OPENSSL_CMD \
+    tests/ssl-opt.sh \
+    $@
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index f54295b..ed97f23 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -21,6 +21,10 @@
 
 set -u
 
+# Limit the size of each log to 10 GiB, in case of failures with this script
+# where it may output seemingly unlimited length error logs.
+ulimit -f 20971520
+
 if cd $( dirname $0 ); then :; else
     echo "cd $( dirname $0 ) failed" >&2
     exit 1
diff --git a/tests/suites/target_test.function b/tests/suites/target_test.function
index e4c3e30..d430d9d 100644
--- a/tests/suites/target_test.function
+++ b/tests/suites/target_test.function
@@ -59,10 +59,29 @@
     return( DEPENDENCY_SUPPORTED );
 }
 
+/**
+ * \brief       Receives hex string on serial interface, and converts to a byte.
+ *
+ * \param none
+ *
+ * \return      unsigned int8
+ */
+uint8_t receive_byte()
+{
+    uint8_t byte;
+    uint8_t c[3];
+    char *endptr;
+    c[0] = greentea_getc();
+    c[1] = greentea_getc();
+    c[2] = '\0';
+
+    assert( unhexify( &byte, c ) != 2 );
+    return( byte );
+}
 
 /**
  * \brief       Receives unsigned integer on serial interface.
- *              Integers are encoded in network order.
+ *              Integers are encoded in network order, and sent as hex ascii string.
  *
  * \param none
  *
@@ -71,10 +90,17 @@
 uint32_t receive_uint32()
 {
     uint32_t value;
-    value =  (uint8_t)greentea_getc() << 24;
-    value |= (uint8_t)greentea_getc() << 16;
-    value |= (uint8_t)greentea_getc() << 8;
-    value |= (uint8_t)greentea_getc();
+    const uint8_t c[9] = { greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           greentea_getc(),
+                           '\0'
+                         };
+    assert( unhexify( &value, c ) != 8 );
     return( (uint32_t)value );
 }
 
@@ -132,7 +158,7 @@
     greentea_getc(); // read ';' received after key i.e. *data_len
 
     for( i = 0; i < *data_len; i++ )
-        data[i] = greentea_getc();
+        data[i] = receive_byte();
 
     /* Read closing braces */
     for( i = 0; i < 2; i++ )