diff --git a/docs/architecture/testing/driver-interface-test-strategy.md b/docs/architecture/testing/driver-interface-test-strategy.md
index 380fd39..5fc5e18 100644
--- a/docs/architecture/testing/driver-interface-test-strategy.md
+++ b/docs/architecture/testing/driver-interface-test-strategy.md
@@ -114,7 +114,7 @@
 
 A PKCS#11 driver would be a good candidate. It would be useful as part of our product offering.
 
-## Transparent driver interface testing
+## Unified driver interface testing
 
 The [unified driver interface](../../proposed/psa-driver-interface.md) defines interfaces for accelerators.
 
@@ -128,6 +128,470 @@
 
 The driver interface includes a fallback mechanism so that a driver can reject a request at runtime and let another driver handle the request. For each entry point, there must be at least three test runs with two or more drivers available with driver A configured to fall back to driver B, with one run where A returns `PSA_SUCCESS`, one where A returns `PSA_ERROR_NOT_SUPPORTED` and B is invoked, and one where A returns a different error and B is not invoked.
 
-## Entropy and randomness interface testing
+### Test drivers
 
-TODO
+We have test drivers that are enabled by `PSA_CRYPTO_DRIVER_TEST` (not present
+in the usual config files, must be defined on the command line or in a custom
+config file). Those test drivers are implemented in `tests/src/drivers/*.c`
+and their API is declared in `tests/include/test/drivers/*.h`.
+
+We have two test driver registered: `mbedtls_test_opaque_driver` and
+`mbedtls_test_transparent_driver`. These are described in
+`scripts/data_files/driver_jsons/mbedtls_test_xxx_driver.json` (as much as our
+JSON support currently allows). Each of the drivers can potentially implement
+support for several mechanism; conversely, each of the file mentioned in the
+previous paragraph can potentially contribute to both the opaque and the
+transparent test driver.
+
+Each entry point is instrumented to record the number of hits for each part of
+the driver (same division as the files) and the status of the last call. It is
+also possible to force the next call to return a specified status, and
+sometimes more things can be forced: see the various
+`mbedtls_test_driver_XXX_hooks_t` structures declared by each driver (and
+subsections below).
+
+The drivers can use one of two back-ends:
+- internal: this requires the built-in implementation to be present.
+- libtestdriver1: this allows the built-in implementation to be omitted from
+  the build.
+
+Historical note: internal was initially the only back-end; then support for
+libtestdriver1 was added gradually. Support for libtestdriver1 is now complete
+(see following sub-sections), so we could remove internal now. Note it's
+useful to have builds with both a driver and the built-in, in order to test
+fallback to built-in, which is currently done only with internal, but this can
+be achieved with libtestdriver1 just as well.
+
+Note on instrumentation: originally, when only the internal backend was
+available, hits were how we knew that the driver was called, as opposed to
+directly calling the built-in code. With libtestdriver1, we can check that by
+ensuring that the built-in code is not present, so if the operation gives the
+correct result, only a driver call can have calculated that result. So,
+nowadays there is low value in checking the hit count. There is still some
+value for hit counts, e.g. checking that we don't call a multipart entry point
+when we intended to call the one-shot entry point, but it's limited.
+
+Note: our test drivers tend to provide all possible entry points (with a few
+exceptions that may not be intentional, see the next sections). However, in
+some cases, when an entry point is not available, the core is supposed to
+implement it using other entry points, for example:
+- `mac_verify` may use `mac_compute` if the driver does no provide verify;
+- for things that have both one-shot and multi-part API, the driver can
+  provide only the multi-part entry points, and the core is supposed to
+implement one-shot on top of it (but still call the one-shot entry points when
+they're available);
+- `sign/verify_message` can be implemented on top of `sign/verify_hash` for
+  some algorithms;
+- (not sure if the list is exhaustive).
+
+Ideally, we'd want build options for the test drivers so that we can test with
+different combinations of entry points present, and make sure the core behaves
+appropriately when some entry points are absent but other entry points allow
+implementing the operation. This will remain hard to test until we have proper
+support for JSON-defined drivers with auto-generation of dispatch code.
+(The `MBEDTLS_PSA_ACCEL_xxx` macros we currently use are not expressive enough
+to specify which entry points are supported for a given mechanism.)
+
+Our implementation of PSA Crypto is structured in a way that the built-in
+implementation of each operation follows the driver API, see
+[`../architecture/psa-crypto-implementation-structure.md`](../architecture/psa-crypto-implementation-structure.html).
+This makes implementing the test drivers very easy: each entry point has a
+corresponding `mbedtls_psa_xxx()` function that it can call as its
+implementation - with the `libtestdriver1` back-end the function is called
+`libtestdriver1_mbedtls_psa_xxx()` instead.
+
+A nice consequence of that strategy is that when an entry point has
+test-driver support, most of the time, it automatically works for all
+algorithms and key types supported by the library. (The exception being when
+the driver needs to call a different function for different key types, as is
+the case with some asymmetric key management operations.) (Note: it's still
+useful to test drivers in configurations with partial algorithm support, and
+that can still be done by configuring libtestdriver1 and the main library as
+desired.)
+
+The renaming process for `libtestdriver1` is implemented as a few Perl regexes
+applied to a copy of the library code, see the `libtestdriver1.a` target in
+`tests/Makefile`. Another modification that's done to this copy is appending
+`tests/include/test/drivers/crypto_config_test_driver_extension.h` to
+`psa/crypto_config.h`. This file reverses the `ACCEL`/`BUILTIN` macros so that
+`libtestdriver1` includes as built-in what the main `libmbedcrypto.a` will
+have accelerated; see that file's initial comment for details. See also
+`helper_libtestdriver1_` functions and the preceding comment in `all.sh` for
+how libtestdriver is used in practice.
+
+This general framework needs specific code for each family of operations. At a
+given point in time, not all operations have the same level of support. The
+following sub-sections describe the status of the test driver support, mostly
+following the structure and order of sections 9.6 and 10.2 to 10.10 of the
+[PSA Crypto standard](https://arm-software.github.io/psa-api/crypto/1.1/) as
+that is also a natural division for implementing test drivers (that's how the
+code is divided into files).
+
+#### Key management
+
+The following entry points are declared in `test/drivers/key_management.h`:
+
+- `"init"` (transparent and opaque)
+- `"generate_key"` (transparent and opaque)
+- `"export_public_key"` (transparent and opaque)
+- `"import_key"` (transparent and opaque)
+- `"export_key"` (opaque only)
+- `"get_builtin_key"` (opaque only)
+- `"copy_key"` (opaque only)
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque's driver implementation status is as follows:
+- `"generate_key"`: not implemented, always returns `NOT_SUPPORTED`.
+- `"export_public_key"`: implemented only for ECC and RSA keys, both backends.
+- `"import_key"`: implemented except for DH keys, both backends.
+- `"export_key"`: implemented for built-in keys (ECC and AES), and for
+  non-builtin keys except DH keys. (Backend not relevant.)
+- `"get_builtin_key"`: implemented - provisioned keys: AES-128 and ECC
+  secp2456r1. (Backend not relevant.)
+- `"copy_key"`: implemented - emulates a SE without storage. (Backend not
+  relevant.)
+
+Note: the `"init"` entry point is not part of the "key management" family, but
+listed here as it's declared and implemented in the same file. With the
+transparent driver and the libtestdriver1 backend, it calls
+`libtestdriver1_psa_crypto_init()`, which partially but not fully ensures
+that this entry point is called before other entry points in the test drivers.
+With the opaque driver, this entry point just does nothing an returns success.
+
+The following entry points are defined by the driver interface but missing
+from our test drivers:
+- `"allocate_key"`, `"destroy_key"`: this is for opaque drivers that store the
+  key material internally.
+
+Note: the instrumentation also allows forcing the output and its length.
+
+#### Message digests (Hashes)
+
+The following entry points are declared (transparent only):
+- `"hash_compute"`
+- `"hash_setup"`
+- `"hash_clone"`
+- `"hash_update"`
+- `"hash_finish"`
+- `"hash_abort"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+This familly is not part of the opaque driver as it doesn't use keys.
+
+#### Message authentication codes (MAC)
+
+The following entry points are declared (transparent and opaque):
+- `"mac_compute"`
+- `"mac_sign_setup"`
+- `"mac_verify_setup"`
+- `"mac_update"`
+- `"mac_sign_finish"`
+- `"mac_verify_finish"`
+- `"mac_abort"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver only implements the instrumentation but not the actual
+operations: entry points will always return `NOT_SUPPORTED`, unless another
+status is forced.
+
+The following entry points are not implemented:
+- `mac_verify`: this mostly makes sense for opaque drivers; the core will fall
+  back to using `"mac_compute"` if this is not implemented. So, perhaps
+ideally we should test both with `"mac_verify"` implemented and with it not
+implemented? Anyway, we have a test gap here.
+
+#### Unauthenticated ciphers
+
+The following entry points are declared (transparent and opaque):
+- `"cipher_encrypt"`
+- `"cipher_decrypt"`
+- `"cipher_encrypt_setup"`
+- `"cipher_decrypt_setup"`
+- `"cipher_set_iv"`
+- `"cipher_update"`
+- `"cipher_finish"`
+- `"cipher_abort"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver is not implemented at all, neither instumentation nor the
+operation: entry points always return `NOT_SUPPORTED`.
+
+Note: the instrumentation also allows forcing a specific output and output
+length.
+
+#### Authenticated encryption with associated data (AEAD)
+
+The following entry points are declared (transparent only):
+- `"aead_encrypt"`
+- `"aead_decrypt"`
+- `"aead_encrypt_setup"`
+- `"aead_decrypt_setup"`
+- `"aead_set_nonce"`
+- `"aead_set_lengths"`
+- `"aead_update_ad"`
+- `"aead_update"`
+- `"aead_finish"`
+- `"aead_verify"`
+- `"aead_abort"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver does not implement or even declare entry points for this
+family.
+
+Note: the instrumentation records the number of hits per entry point, not just
+the total number of hits for this family.
+
+#### Key derivation
+
+Not covered at all by the test drivers.
+
+That's a test gap which reflects a feature gap: the driver interface does
+define a key derivation family of entry points, but we don't currently
+implement that part of the driver interface, see #5488 and related issues.
+
+#### Asymmetric signature
+
+The following entry points are declared (transparent and opaque):
+
+- `"sign_message"`
+- `"verify_message"`
+- `"sign_hash"`
+- `"verify_hash"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver is not implemented at all, neither instumentation nor the
+operation: entry points always return `NOT_SUPPORTED`.
+
+Note: the instrumentation also allows forcing a specific output and output
+length, and has two instance of the hooks structure: one for sign, the other
+for verify.
+
+Note: when a driver implements only the `"xxx_hash"` entry points, the core is
+supposed to implement the `psa_xxx_message()` functions by computing the hash
+itself before calling the `"xxx_hash"` entry point. Since the test driver does
+implement the `"xxx_message"` entry point, it's not exercising that part of
+the core's expected behaviour.
+
+#### Asymmetric encryption
+
+The following entry points are declared (transparent and opaque):
+
+- `"asymmetric_encrypt"`
+- `"asymmetric_decrypt"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver implements the declared entry points, and can use any
+backend: internal or libtestdriver1. However it does not implement the
+instrumentation (hits, forced output/status), as this [was not an immediate
+priority](https://github.com/Mbed-TLS/mbedtls/pull/8700#issuecomment-1892466159).
+
+Note: the instrumentation also allows forcing a specific output and output
+length.
+
+#### Key agreement
+
+The following entry points are declared (transparent and opaque):
+
+- `"key_agreement"`
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver is not implemented at all, neither instumentation nor the
+operation: entry points always return `NOT_SUPPORTED`.
+
+Note: the instrumentation also allows forcing a specific output and output
+length.
+
+#### Other cryptographic services (Random number generation)
+
+Not covered at all by the test drivers.
+
+The driver interface defines a `"get_entropy"` entry point, as well as a
+"Random generation" family of entry points. None of those are currently
+implemented in the library. Part of it will be planned for 4.0, see #8150.
+
+#### PAKE extension
+
+The following entry points are declared (transparent only):
+- `"pake_setup"`
+- `"pake_output"`
+- `"pake_input"`
+- `"pake_get_implicit_key"`
+- `"pake_abort"`
+
+Note: the instrumentation records hits per entry point and allows forcing the
+output and its length, as well as forcing the status of setup independently
+from the others.
+
+The transparent driver fully implements the declared entry points, and can use
+any backend: internal or libtestdriver1.
+
+The opaque driver does not implement or even declare entry points for this
+family.
+
+### Driver wrapper test suite
+
+We have a test suite dedicated to driver dispatch, which takes advantage of the
+instrumentation in the test drivers described in the previous section, in
+order to check that drivers are called when they're supposed to, and that the
+core behaves as expected when they return errors (in particular, that we fall
+back to the built-in implementation when the driver returns `NOT_SUPPORTED`).
+
+This is `test_suite_psa_crypto_driver_wrappers`, which is maintained manually
+(that is, the test cases in the `.data` files are not auto-generated). The
+entire test suite depends on the test drivers being enabled
+(`PSA_CRYPTO_DRIVER_TEST`), which is not the case in the default or full
+config.
+
+The test suite is focused on driver usage (mostly by checking the expected
+number of hits) but also does some validation of the results: for
+deterministic algorithms, known-answers tests are used, and for the rest, some
+consistency checks are done (more or less detailled depending on the algorithm
+and build configuration).
+
+#### Configurations coverage
+
+The driver wrappers test suite has cases that expect both the driver and the
+built-in to be present, and also cases that expect the driver to be present
+but not the built-in. As such, it's impossible for a single configuration to
+run all test cases, and we need at least two: driver+built-in, and
+driver-only.
+
+- The driver+built-in case is covered by `test_psa_crypto_drivers` in `all.sh`.
+This covers all areas (key types and algs) at once.
+- The driver-only case is split into multiple `all.sh` components whose names
+  start with `test_psa_crypto_config_accel`; we have one or more component per
+area, see below.
+
+Here's a summary of driver-only coverage, grouped by families of key types.
+
+Hash (key types: none)
+- `test_psa_crypto_config_accel_hash`: all algs, default config, no parity
+  testing.
+- `test_psa_crypto_config_accel_hash_use_psa`: all algs, full config, with
+  parity testing.
+
+HMAC (key type: HMAC)
+- `test_psa_crypto_config_accel_hmac`: all algs, full config except a few
+  exclusions (PKCS5, PKCS7, HMAC-DRBG, legacy HKDF, deterministic ECDSA), with
+parity testing.
+
+Cipher, AEAD and CMAC (key types: DES, AES, ARIA, CHACHA20, CAMELLIA):
+- `test_psa_crypto_config_accel_cipher_aead_cmac`: all key types and algs, full
+  config with a few exclusions (NIST-KW), with parity testing.
+- `test_psa_crypto_config_accel_des`: only DES (with all algs), full
+  config, no parity testing.
+- `test_psa_crypto_config_accel_aead`: only AEAD algs (with all relevant key
+  types), full config, no parity testing.
+
+Key derivation (key types: `DERIVE`, `RAW_DATA`, `PASSWORD`, `PEPPER`,
+`PASSWORD_HASH`):
+- No testing as we don't have driver support yet (see previous section).
+
+RSA (key types: `RSA_KEY_PAIR_xxx`, `RSA_PUBLIC_KEY`):
+- `test_psa_crypto_config_accel_rsa_crypto`: all 4 algs (encryption &
+  signature, v1.5 & v2.1), config `crypto_full`, with parity testing excluding
+PK.
+
+DH (key types: `DH_KEY_PAIR_xxx`, `DH_PUBLIC_KEY`):
+- `test_psa_crypto_config_accel_ffdh`: all key types and algs, full config,
+  with parity testing.
+- `test_psa_crypto_config_accel_ecc_ffdh_no_bignum`: with also bignum removed.
+
+ECC (key types: `ECC_KEY_PAIR_xxx`, `ECC_PUBLIC_KEY`):
+- Single algorithm accelerated (both key types, all curves):
+  - `test_psa_crypto_config_accel_ecdh`: default config, no parity testing.
+  - `test_psa_crypto_config_accel_ecdsa`: default config, no parity testing.
+  - `test_psa_crypto_config_accel_pake`: full config, no parity testing.
+- All key types, algs and curves accelerated (full config with exceptions,
+  with parity testing):
+  - `test_psa_crypto_config_accel_ecc_ecp_light_only`: `ECP_C` mostly disabled
+  - `test_psa_crypto_config_accel_ecc_no_ecp_at_all`: `ECP_C` fully disabled
+  - `test_psa_crypto_config_accel_ecc_no_bignum`: `BIGNUM_C` disabled (DH disabled)
+  - `test_psa_crypto_config_accel_ecc_ffdh_no_bignum`: `BIGNUM_C` disabled (DH accelerated)
+- Other - all algs accelerated but only some algs/curves (full config with
+  exceptions, no parity testing):
+  - `test_psa_crypto_config_accel_ecc_some_key_types`
+  - `test_psa_crypto_config_accel_ecc_non_weierstrass_curves`
+  - `test_psa_crypto_config_accel_ecc_weierstrass_curves`
+
+Note: `analyze_outcomes.py` provides a list of test cases that are not
+executed in any configuration tested on the CI. We're missing driver-only HMAC
+testing, but no test is flagged as never executed there; this reveals we don't
+have "fallback not available" cases for MAC, see #8565.
+
+#### Test case coverage
+
+Since `test_suite_psa_crypto_driver_wrappers.data` is maintained manually,
+we need to make sure it exercises all the cases that need to be tested. In the
+future, this file should be generated in order to ensure exhaustiveness.
+
+In the meantime, one way to observe (lack of) completeness is to look at line
+coverage in test driver implementaitons - this doesn't reveal all gaps, but it
+does reveal cases where we thought about something when writing the test
+driver, but not when writing test functions/data.
+
+Key management:
+- `mbedtls_test_transparent_generate_key()` is not tested with RSA keys.
+- `mbedtls_test_transparent_import_key()` is not tested with DH keys.
+- `mbedtls_test_opaque_import_key()` is not tested with unstructured keys nor
+  with RSA keys (nor DH keys since that's not implemented).
+- `mbedtls_test_opaque_export_key()` is not tested with non-built-in keys.
+- `mbedtls_test_transparent_export_public_key()` is not tested with RSA or DH keys.
+- `mbedtls_test_opaque_export_public_key()` is not tested with non-built-in keys.
+- `mbedtls_test_opaque_copy_key()` is not tested at all.
+
+Hash:
+- `mbedtls_test_transparent_hash_finish()` is not tested with a forced status.
+
+MAC:
+- The following are not tested with a forced status:
+  - `mbedtls_test_transparent_mac_sign_setup()`
+  - `mbedtls_test_transparent_mac_verify_setup()`
+  - `mbedtls_test_transparent_mac_update()`
+  - `mbedtls_test_transparent_mac_verify_finish()`
+  - `mbedtls_test_transparent_mac_abort()`
+- No opaque entry point is tested (they're not implemented either).
+
+Cipher:
+- The following are not tested with a forced status nor with a forced output:
+  - `mbedtls_test_transparent_cipher_encrypt()`
+  - `mbedtls_test_transparent_cipher_finish()`
+- No opaque entry point is tested (they're not implemented either).
+
+AEAD:
+- The following are not tested with a forced status:
+  - `mbedtls_test_transparent_aead_set_nonce()`
+  - `mbedtls_test_transparent_aead_set_lengths()`
+  - `mbedtls_test_transparent_aead_update_ad()`
+  - `mbedtls_test_transparent_aead_update()`
+  - `mbedtls_test_transparent_aead_finish()`
+  - `mbedtls_test_transparent_aead_verify()`
+- `mbedtls_test_transparent_aead_verify()` is not tested with an invalid tag
+  (though it might be in another test suite).
+
+Signature:
+- `sign_hash()` is not tested with RSA-PSS
+- No opaque entry point is tested (they're not implemented either).
+
+Key agreement:
+- `mbedtls_test_transparent_key_agreement()` is not tested with FFDH.
+- No opaque entry point is tested (they're not implemented either).
+
+PAKE:
+- All lines are covered.
diff --git a/tests/configs/user-config-for-test.h b/tests/configs/user-config-for-test.h
index 639496b..f40f838 100644
--- a/tests/configs/user-config-for-test.h
+++ b/tests/configs/user-config-for-test.h
@@ -37,24 +37,61 @@
 #endif
 
 /* Use the accelerator driver for all cryptographic mechanisms for which
- * the test driver implemented. */
+ * the test driver is implemented. This is copied from psa/crypto_config.h
+ * with the parts not implemented by the test driver commented out. */
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DERIVE
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_PASSWORD
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_PASSWORD_HASH
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_HMAC
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_AES
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ARIA
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_CHACHA20
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DES
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_GENERATE
-#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR
+//#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DH_PUBLIC_KEY
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DH_KEY_PAIR_BASIC
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DH_KEY_PAIR_IMPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DH_KEY_PAIR_EXPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_DH_KEY_PAIR_GENERATE
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RAW_DATA
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR_BASIC
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR_IMPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR_EXPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR_GENERATE
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY
+
 #define MBEDTLS_PSA_ACCEL_ALG_CBC_NO_PADDING
 #define MBEDTLS_PSA_ACCEL_ALG_CBC_PKCS7
-#define MBEDTLS_PSA_ACCEL_ALG_CTR
+#define MBEDTLS_PSA_ACCEL_ALG_CCM
+#define MBEDTLS_PSA_ACCEL_ALG_CCM_STAR_NO_TAG
+#define MBEDTLS_PSA_ACCEL_ALG_CMAC
 #define MBEDTLS_PSA_ACCEL_ALG_CFB
-#define MBEDTLS_PSA_ACCEL_ALG_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_CHACHA20_POLY1305
+#define MBEDTLS_PSA_ACCEL_ALG_CTR
 #define MBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_ECB_NO_PADDING
+#define MBEDTLS_PSA_ACCEL_ALG_ECDH
+#define MBEDTLS_PSA_ACCEL_ALG_FFDH
+#define MBEDTLS_PSA_ACCEL_ALG_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_JPAKE
+#define MBEDTLS_PSA_ACCEL_ALG_GCM
+//#define MBEDTLS_PSA_ACCEL_ALG_HKDF
+//#define MBEDTLS_PSA_ACCEL_ALG_HKDF_EXTRACT
+//#define MBEDTLS_PSA_ACCEL_ALG_HKDF_EXPAND
+#define MBEDTLS_PSA_ACCEL_ALG_HMAC
 #define MBEDTLS_PSA_ACCEL_ALG_MD5
 #define MBEDTLS_PSA_ACCEL_ALG_OFB
+//#define MBEDTLS_PSA_ACCEL_ALG_PBKDF2_HMAC
+//#define MBEDTLS_PSA_ACCEL_ALG_PBKDF2_AES_CMAC_PRF_128
 #define MBEDTLS_PSA_ACCEL_ALG_RIPEMD160
+#define MBEDTLS_PSA_ACCEL_ALG_RSA_OAEP
+#define MBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT
 #define MBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN
 #define MBEDTLS_PSA_ACCEL_ALG_RSA_PSS
 #define MBEDTLS_PSA_ACCEL_ALG_SHA_1
@@ -62,9 +99,14 @@
 #define MBEDTLS_PSA_ACCEL_ALG_SHA_256
 #define MBEDTLS_PSA_ACCEL_ALG_SHA_384
 #define MBEDTLS_PSA_ACCEL_ALG_SHA_512
-#define MBEDTLS_PSA_ACCEL_ALG_XTS
-#define MBEDTLS_PSA_ACCEL_ALG_CMAC
-#define MBEDTLS_PSA_ACCEL_ALG_HMAC
+#define MBEDTLS_PSA_ACCEL_ALG_SHA3_224
+#define MBEDTLS_PSA_ACCEL_ALG_SHA3_256
+#define MBEDTLS_PSA_ACCEL_ALG_SHA3_384
+#define MBEDTLS_PSA_ACCEL_ALG_SHA3_512
+#define MBEDTLS_PSA_ACCEL_ALG_STREAM_CIPHER
+//#define MBEDTLS_PSA_ACCEL_ALG_TLS12_PRF
+//#define MBEDTLS_PSA_ACCEL_ALG_TLS12_PSK_TO_MS
+//#define MBEDTLS_PSA_ACCEL_ALG_TLS12_ECJPAKE_TO_PMS
 
 #endif  /* PSA_CRYPTO_DRIVER_TEST_ALL */
 
diff --git a/tests/include/test/drivers/crypto_config_test_driver_extension.h b/tests/include/test/drivers/crypto_config_test_driver_extension.h
index dac07ac..66378e7 100644
--- a/tests/include/test/drivers/crypto_config_test_driver_extension.h
+++ b/tests/include/test/drivers/crypto_config_test_driver_extension.h
@@ -1,9 +1,24 @@
 /**
- * This file is intended to be used to build PSA test driver libraries. It is
- * intended to be appended by the test build system to the crypto_config.h file
- * of the Mbed TLS library the test library will be linked to. It mirrors the
- * PSA_ACCEL_* macros defining the cryptographic operations the test library
- * supports.
+ * This file is intended to be used to build PSA external test driver
+ * libraries (libtestdriver1).
+ *
+ * It is intended to be appended by the test build system to the
+ * crypto_config.h file of the Mbed TLS library the test library will be
+ * linked to (see `tests/Makefile` libtestdriver1 target). This is done in
+ * order to insert it at the right time: after the main configuration
+ * (PSA_WANT) but before the logic that determines what built-ins to enable
+ * based on PSA_WANT and MBEDTLS_PSA_ACCEL macros.
+ *
+ * It reverses the PSA_ACCEL_* macros defining the cryptographic operations
+ * that will be accelerated in the main library:
+ * - When something is accelerated in the main library, we need it supported
+ *   in libtestdriver1, so we disable the accel macro in order to the built-in
+ *   to be enabled.
+ * - When something is NOT accelerated in the main library, we don't need it
+ *   in libtestdriver1, so we enable its accel macro in order to the built-in
+ *   to be disabled, to keep libtestdriver1 minimal. (We can't adjust the
+ *   PSA_WANT macros as they need to be the same between libtestdriver1 and
+ *   the main library, since they determine the ABI between the two.)
  */
 
 #include "psa/crypto_legacy.h"
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index b12a86f..2c800ff 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -916,6 +916,39 @@
     fi
 }
 
+# Build the drivers library libtestdriver1.a (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# 2. optional: a space-separate list of things to also support.
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_drivers() {
+    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# Build the main libraries, programs and tests,
+# linking to the drivers library (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# *. remaining arguments if any are passed directly to make
+#    (examples: lib, -C tests test_suite_xxx, etc.)
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_main() {
+    loc_accel_list=$1
+    shift
+
+    # we need flags both with and without the LIBTESTDRIVER1_ prefix
+    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
+}
+
+################################################################
+#### Configuration helpers
+################################################################
+
 # When called with no parameter this function disables all builtin curves.
 # The function optionally accepts 1 parameter: a space-separated list of the
 # curves that should be kept enabled.
@@ -969,35 +1002,6 @@
     echo "$loc_list"
 }
 
-# Build the drivers library libtestdriver1.a (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# 2. optional: a space-separate list of things to also support.
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_drivers() {
-    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# Build the main libraries, programs and tests,
-# linking to the drivers library (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# *. remaining arguments if any are passed directly to make
-#    (examples: lib, -C tests test_suite_xxx, etc.)
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_main() {
-    loc_accel_list=$1
-    shift
-
-    # we need flags both with and without the LIBTESTDRIVER1_ prefix
-    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
-}
-
 ################################################################
 #### Basic checks
 ################################################################
@@ -3705,26 +3709,6 @@
     make test
 }
 
-component_test_psa_crypto_config_accel_hash_keep_builtins () {
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
-    # This component ensures that all the test cases for
-    # md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run.
-
-    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
-                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    # Start from default config (no USE_PSA)
-    helper_libtestdriver1_adjust_config "default"
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
-    make test
-}
-
 # Auxiliary function to build config for hashes with and without drivers
 config_psa_crypto_hash_use_psa () {
     driver_only="$1"
@@ -4178,254 +4162,6 @@
     make test
 }
 
-# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test.
-component_build_psa_accel_alg_ecdh() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
-component_build_psa_accel_alg_hmac() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test.
-component_build_psa_accel_alg_hkdf() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_HKDF_C
-    # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it.
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test.
-component_build_psa_accel_alg_md5() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test.
-component_build_psa_accel_alg_ripemd160() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test.
-component_build_psa_accel_alg_sha1() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test.
-component_build_psa_accel_alg_sha224() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test.
-component_build_psa_accel_alg_sha256() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test.
-component_build_psa_accel_alg_sha384() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test.
-component_build_psa_accel_alg_sha512() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pkcs1v15_crypt() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pkcs1v15_sign() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_oaep() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pss() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_key_type_rsa_key_pair() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_key_type_rsa_public_key() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-
 support_build_tfm_armcc () {
     support_build_armcc
 }
diff --git a/tests/src/drivers/test_driver_pake.c b/tests/src/drivers/test_driver_pake.c
index a0b6c1c..52395e4 100644
--- a/tests/src/drivers/test_driver_pake.c
+++ b/tests/src/drivers/test_driver_pake.c
@@ -1,5 +1,5 @@
 /*
- * Test driver for MAC entry points.
+ * Test driver for PAKE entry points.
  */
 /*  Copyright The Mbed TLS Contributors
  *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later