diff --git a/ChangeLog.d/build_with_only_montgomery_curves.txt b/ChangeLog.d/build_with_only_montgomery_curves.txt
new file mode 100644
index 0000000..d4ec7c5
--- /dev/null
+++ b/ChangeLog.d/build_with_only_montgomery_curves.txt
@@ -0,0 +1,6 @@
+Bugfix
+   * Fix build errors when the only enabled elliptic curves are Montgomery
+     curves. Raised by signpainter in #941 and by Taiki-San in #1412. This
+     also fixes missing declarations reported by Steven Cooreman in #1147.
+   * Fix self-test failure when the only enabled short Weierstrass elliptic
+     curve is secp192k1. Fixes #2017.
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index f2148a8..4f6c632 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -103,6 +103,17 @@
 
 #if defined(MBEDTLS_ECDSA_C) &&            \
     ( !defined(MBEDTLS_ECP_C) ||           \
+      !( defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED) || \
+         defined(MBEDTLS_ECP_DP_BP256R1_ENABLED) ||   \
+         defined(MBEDTLS_ECP_DP_BP384R1_ENABLED) ||   \
+         defined(MBEDTLS_ECP_DP_BP512R1_ENABLED) ) || \
       !defined(MBEDTLS_ASN1_PARSE_C) ||    \
       !defined(MBEDTLS_ASN1_WRITE_C) )
 #error "MBEDTLS_ECDSA_C defined, but not all prerequisites"
@@ -246,12 +257,14 @@
 #endif
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) &&                 \
-    ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) )
+    ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_ECDSA_C) ||          \
+      !defined(MBEDTLS_X509_CRT_PARSE_C) )
 #error "MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED defined, but not all prerequisites"
 #endif
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) &&                 \
-    ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) )
+    ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_RSA_C) ||          \
+      !defined(MBEDTLS_X509_CRT_PARSE_C) )
 #error "MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED defined, but not all prerequisites"
 #endif
 
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index e00c546..24ba789 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -756,6 +756,7 @@
  *
  * Comment macros to disable the curve and functions for it
  */
+/* Short Weierstrass curves (supporting ECP, ECDH, ECDSA) */
 #define MBEDTLS_ECP_DP_SECP192R1_ENABLED
 #define MBEDTLS_ECP_DP_SECP224R1_ENABLED
 #define MBEDTLS_ECP_DP_SECP256R1_ENABLED
@@ -767,6 +768,7 @@
 #define MBEDTLS_ECP_DP_BP256R1_ENABLED
 #define MBEDTLS_ECP_DP_BP384R1_ENABLED
 #define MBEDTLS_ECP_DP_BP512R1_ENABLED
+/* Montgomery curves (supporting ECP) */
 #define MBEDTLS_ECP_DP_CURVE25519_ENABLED
 #define MBEDTLS_ECP_DP_CURVE448_ENABLED
 
@@ -1083,7 +1085,7 @@
  *
  * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
  *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C
  *
  * This enables the following ciphersuites (if other requisites are
  * enabled as well):
@@ -1107,7 +1109,7 @@
  *
  * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
  *
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_X509_CRT_PARSE_C
  *
  * This enables the following ciphersuites (if other requisites are
  * enabled as well):
@@ -2571,7 +2573,9 @@
  * This module is used by the following key exchanges:
  *      ECDHE-ECDSA
  *
- * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C,
+ *           and at least one MBEDTLS_ECP_DP_XXX_ENABLED for a
+ *           short Weierstrass curve.
  */
 #define MBEDTLS_ECDSA_C
 
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index 450e354..980ec5e 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -61,6 +61,26 @@
 
 #define MBEDTLS_ERR_ECP_IN_PROGRESS                       -0x4B00  /**< Operation in progress, call again with the same parameters to continue. */
 
+/* Flags indicating whether to include code that is specific to certain
+ * types of curves. These flags are for internal library use only. */
+#if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_BP256R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_BP384R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_BP512R1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED)
+#define MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED
+#endif
+#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED) || \
+    defined(MBEDTLS_ECP_DP_CURVE448_ENABLED)
+#define MBEDTLS_ECP_MONTGOMERY_ENABLED
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -74,6 +94,20 @@
  * parameters. Therefore, only standardized domain parameters from trusted
  * sources should be used. See mbedtls_ecp_group_load().
  */
+/* Note: when adding a new curve:
+ * - Add it at the end of this enum, otherwise you'll break the ABI by
+ *   changing the numerical value for existing curves.
+ * - Increment MBEDTLS_ECP_DP_MAX below if needed.
+ * - Add the corresponding MBEDTLS_ECP_DP_xxx_ENABLED macro definition to
+ *   config.h.
+ * - List the curve as a dependency of MBEDTLS_ECP_C and
+ *   MBEDTLS_ECDSA_C if supported in check_config.h.
+ * - Add the curve to the appropriate curve type macro
+ *   MBEDTLS_ECP_yyy_ENABLED above.
+ * - Add the necessary definitions to ecp_curves.c.
+ * - Add the curve to the ecp_supported_curves array in ecp.c.
+ * - Add the curve to applicable profiles in x509_crt.c if applicable.
+ */
 typedef enum
 {
     MBEDTLS_ECP_DP_NONE = 0,       /*!< Curve not defined. */
@@ -906,6 +940,7 @@
              int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
              mbedtls_ecp_restart_ctx *rs_ctx );
 
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
 /**
  * \brief           This function performs multiplication and addition of two
  *                  points by integers: \p R = \p m * \p P + \p n * \p Q
@@ -915,6 +950,10 @@
  * \note            In contrast to mbedtls_ecp_mul(), this function does not
  *                  guarantee a constant execution flow and timing.
  *
+ * \note            This function is only defined for short Weierstrass curves.
+ *                  It may not be included in builds without any short
+ *                  Weierstrass curve.
+ *
  * \param grp       The ECP group to use.
  *                  This must be initialized and have group parameters
  *                  set, for example through mbedtls_ecp_group_load().
@@ -933,6 +972,8 @@
  *                  valid private keys, or \p P or \p Q are not valid public
  *                  keys.
  * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return          #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if \p grp does not
+ *                  designate a short Weierstrass curve.
  * \return          Another negative error code on other kinds of failure.
  */
 int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
@@ -950,6 +991,10 @@
  *                  but it can return early and restart according to the limit
  *                  set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
  *
+ * \note            This function is only defined for short Weierstrass curves.
+ *                  It may not be included in builds without any short
+ *                  Weierstrass curve.
+ *
  * \param grp       The ECP group to use.
  *                  This must be initialized and have group parameters
  *                  set, for example through mbedtls_ecp_group_load().
@@ -969,6 +1014,8 @@
  *                  valid private keys, or \p P or \p Q are not valid public
  *                  keys.
  * \return          #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return          #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if \p grp does not
+ *                  designate a short Weierstrass curve.
  * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
  * \return          Another negative error code on other kinds of failure.
@@ -978,6 +1025,7 @@
              const mbedtls_mpi *m, const mbedtls_ecp_point *P,
              const mbedtls_mpi *n, const mbedtls_ecp_point *Q,
              mbedtls_ecp_restart_ctx *rs_ctx );
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
 /**
  * \brief           This function checks that a point is a valid public key
diff --git a/include/mbedtls/ecp_internal.h b/include/mbedtls/ecp_internal.h
index 3b6fbf1..92fee42 100644
--- a/include/mbedtls/ecp_internal.h
+++ b/include/mbedtls/ecp_internal.h
@@ -105,7 +105,7 @@
  */
 void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp );
 
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
 
 #if defined(MBEDTLS_ECP_RANDOMIZE_JAC_ALT)
 /**
@@ -245,9 +245,9 @@
         mbedtls_ecp_point *pt );
 #endif
 
-#endif /* ECP_SHORTWEIERSTRASS */
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
 
 #if defined(MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT)
 int mbedtls_internal_ecp_double_add_mxz( const mbedtls_ecp_group *grp,
@@ -291,7 +291,7 @@
         mbedtls_ecp_point *P );
 #endif
 
-#endif /* ECP_MONTGOMERY */
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
 #endif /* MBEDTLS_ECP_INTERNAL_ALT */
 
diff --git a/library/ecp.c b/library/ecp.c
index 2f69d68..d6ef5ed 100644
--- a/library/ecp.c
+++ b/library/ecp.c
@@ -501,25 +501,6 @@
 
 #endif /* MBEDTLS_ECP_RESTARTABLE */
 
-#if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_BP256R1_ENABLED)   ||   \
-    defined(MBEDTLS_ECP_DP_BP384R1_ENABLED)   ||   \
-    defined(MBEDTLS_ECP_DP_BP512R1_ENABLED)   ||   \
-    defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) ||   \
-    defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED)
-#define ECP_SHORTWEIERSTRASS
-#endif
-
-#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED) || \
-    defined(MBEDTLS_ECP_DP_CURVE448_ENABLED)
-#define ECP_MONTGOMERY
-#endif
-
 /*
  * List of supported curves:
  *  - internal ID
@@ -897,7 +878,8 @@
 
     plen = mbedtls_mpi_size( &grp->P );
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
+    (void) format; /* Montgomery curves always use the same point format */
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         *olen = plen;
@@ -907,7 +889,7 @@
         MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary_le( &P->X, buf, plen ) );
     }
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         /*
@@ -970,7 +952,7 @@
 
     plen = mbedtls_mpi_size( &grp->P );
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         if( plen != ilen )
@@ -986,7 +968,7 @@
         MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &pt->Z, 1 ) );
     }
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         if( buf[0] == 0x00 )
@@ -1304,7 +1286,7 @@
     return( ret );
 }
 
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
 /*
  * For curves in short Weierstrass form, we do all the internal operations in
  * Jacobian coordinates.
@@ -2413,9 +2395,9 @@
     return( ret );
 }
 
-#endif /* ECP_SHORTWEIERSTRASS */
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
 /*
  * For Montgomery curves, we do all the internal arithmetic in projective
  * coordinates. Import/export of points uses only the x coordinates, which is
@@ -2649,7 +2631,7 @@
     return( ret );
 }
 
-#endif /* ECP_MONTGOMERY */
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
 /*
  * Restartable multiplication R = m * P
@@ -2672,6 +2654,8 @@
     /* reset ops count for this call if top-level */
     if( rs_ctx != NULL && rs_ctx->depth++ == 0 )
         rs_ctx->ops_done = 0;
+#else
+    (void) rs_ctx;
 #endif
 
 #if defined(MBEDTLS_ECP_INTERNAL_ALT)
@@ -2693,11 +2677,11 @@
     }
 
     ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
         MBEDTLS_MPI_CHK( ecp_mul_mxz( grp, R, m, P, f_rng, p_rng ) );
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
         MBEDTLS_MPI_CHK( ecp_mul_comb( grp, R, m, P, f_rng, p_rng, rs_ctx ) );
 #endif
@@ -2731,7 +2715,7 @@
     return( mbedtls_ecp_mul_restartable( grp, R, m, P, f_rng, p_rng, NULL ) );
 }
 
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
 /*
  * Check that an affine point is valid as a public key,
  * short weierstrass curves (SEC1 3.2.3.1)
@@ -2779,8 +2763,9 @@
 
     return( ret );
 }
-#endif /* ECP_SHORTWEIERSTRASS */
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
 /*
  * R = m * P with shortcuts for m == 1 and m == -1
  * NOT constant-time - ONLY for short Weierstrass!
@@ -2926,8 +2911,9 @@
     ECP_VALIDATE_RET( Q   != NULL );
     return( mbedtls_ecp_muladd_restartable( grp, R, m, P, n, Q, NULL ) );
 }
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
 /*
  * Check validity of a public key for Montgomery curves with x-only schemes
  */
@@ -2941,7 +2927,7 @@
 
     return( 0 );
 }
-#endif /* ECP_MONTGOMERY */
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
 /*
  * Check that a point is valid as a public key
@@ -2956,11 +2942,11 @@
     if( mbedtls_mpi_cmp_int( &pt->Z, 1 ) != 0 )
         return( MBEDTLS_ERR_ECP_INVALID_KEY );
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
         return( ecp_check_pubkey_mx( grp, pt ) );
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
         return( ecp_check_pubkey_sw( grp, pt ) );
 #endif
@@ -2976,7 +2962,7 @@
     ECP_VALIDATE_RET( grp != NULL );
     ECP_VALIDATE_RET( d   != NULL );
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         /* see RFC 7748 sec. 5 para. 5 */
@@ -2991,8 +2977,8 @@
 
         return( 0 );
     }
-#endif /* ECP_MONTGOMERY */
-#if defined(ECP_SHORTWEIERSTRASS)
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         /* see SEC1 3.2 */
@@ -3002,7 +2988,7 @@
         else
             return( 0 );
     }
-#endif /* ECP_SHORTWEIERSTRASS */
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
     return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
 }
@@ -3024,7 +3010,7 @@
 
     n_size = ( grp->nbits + 7 ) / 8;
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         /* [M225] page 5 */
@@ -3050,9 +3036,9 @@
             MBEDTLS_MPI_CHK( mbedtls_mpi_set_bit( d, 2, 0 ) );
         }
     }
-#endif /* ECP_MONTGOMERY */
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         /* SEC1 3.2.1: Generate d such that 1 <= n < N */
@@ -3094,7 +3080,7 @@
         }
         while( mbedtls_mpi_cmp_int( d, 1 ) < 0 || cmp != 1 );
     }
-#endif /* ECP_SHORTWEIERSTRASS */
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
 cleanup:
     return( ret );
@@ -3172,7 +3158,7 @@
 
     ret = MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE;
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( &key->grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         /*
@@ -3207,7 +3193,7 @@
     }
 
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( &key->grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &key->d, buf, buflen ) );
@@ -3235,7 +3221,7 @@
     ECP_VALIDATE_RET( key != NULL );
     ECP_VALIDATE_RET( buf != NULL );
 
-#if defined(ECP_MONTGOMERY)
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( mbedtls_ecp_get_type( &key->grp ) == MBEDTLS_ECP_TYPE_MONTGOMERY )
     {
         if( key->grp.id == MBEDTLS_ECP_DP_CURVE25519 )
@@ -3250,7 +3236,7 @@
     }
 
 #endif
-#if defined(ECP_SHORTWEIERSTRASS)
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     if( mbedtls_ecp_get_type( &key->grp ) == MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS )
     {
         MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &key->d, buf, buflen ) );
@@ -3309,33 +3295,141 @@
 
 #if defined(MBEDTLS_SELF_TEST)
 
+/* Adjust the exponent to be a valid private point for the specified curve.
+ * This is sometimes necessary because we use a single set of exponents
+ * for all curves but the validity of values depends on the curve. */
+static int self_test_adjust_exponent( const mbedtls_ecp_group *grp,
+                                      mbedtls_mpi *m )
+{
+    int ret = 0;
+    switch( grp->id )
+    {
+        /* If Curve25519 is available, then that's what we use for the
+         * Montgomery test, so we don't need the adjustment code. */
+#if ! defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
+#if defined(MBEDTLS_ECP_DP_CURVE448_ENABLED)
+        case MBEDTLS_ECP_DP_CURVE448:
+            /* Move highest bit from 254 to N-1. Setting bit N-1 is
+             * necessary to enforce the highest-bit-set constraint. */
+            MBEDTLS_MPI_CHK( mbedtls_mpi_set_bit( m, 254, 0 ) );
+            MBEDTLS_MPI_CHK( mbedtls_mpi_set_bit( m, grp->nbits, 1 ) );
+            /* Copy second-highest bit from 253 to N-2. This is not
+             * necessary but improves the test variety a bit. */
+            MBEDTLS_MPI_CHK(
+                mbedtls_mpi_set_bit( m, grp->nbits - 1,
+                                     mbedtls_mpi_get_bit( m, 253 ) ) );
+            break;
+#endif
+#endif /* ! defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED) */
+        default:
+            /* Non-Montgomery curves and Curve25519 need no adjustment. */
+            (void) grp;
+            (void) m;
+            goto cleanup;
+    }
+cleanup:
+    return( ret );
+}
+
+/* Calculate R = m.P for each m in exponents. Check that the number of
+ * basic operations doesn't depend on the value of m. */
+static int self_test_point( int verbose,
+                            mbedtls_ecp_group *grp,
+                            mbedtls_ecp_point *R,
+                            mbedtls_mpi *m,
+                            const mbedtls_ecp_point *P,
+                            const char *const *exponents,
+                            size_t n_exponents )
+{
+    int ret = 0;
+    size_t i = 0;
+    unsigned long add_c_prev, dbl_c_prev, mul_c_prev;
+    add_count = 0;
+    dbl_count = 0;
+    mul_count = 0;
+
+    MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( m, 16, exponents[0] ) );
+    MBEDTLS_MPI_CHK( self_test_adjust_exponent( grp, m ) );
+    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, R, m, P, NULL, NULL ) );
+
+    for( i = 1; i < n_exponents; i++ )
+    {
+        add_c_prev = add_count;
+        dbl_c_prev = dbl_count;
+        mul_c_prev = mul_count;
+        add_count = 0;
+        dbl_count = 0;
+        mul_count = 0;
+
+        MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( m, 16, exponents[i] ) );
+        MBEDTLS_MPI_CHK( self_test_adjust_exponent( grp, m ) );
+        MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, R, m, P, NULL, NULL ) );
+
+        if( add_count != add_c_prev ||
+            dbl_count != dbl_c_prev ||
+            mul_count != mul_c_prev )
+        {
+            ret = 1;
+            break;
+        }
+    }
+
+cleanup:
+    if( verbose != 0 )
+    {
+        if( ret != 0 )
+            mbedtls_printf( "failed (%u)\n", (unsigned int) i );
+        else
+            mbedtls_printf( "passed\n" );
+    }
+    return( ret );
+}
+
 /*
  * Checkup routine
  */
 int mbedtls_ecp_self_test( int verbose )
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
-    size_t i;
     mbedtls_ecp_group grp;
     mbedtls_ecp_point R, P;
     mbedtls_mpi m;
-    unsigned long add_c_prev, dbl_c_prev, mul_c_prev;
-    /* exponents especially adapted for secp192r1 */
-    const char *exponents[] =
+
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
+    /* Exponents especially adapted for secp192k1, which has the lowest
+     * order n of all supported curves (secp192r1 is in a slightly larger
+     * field but the order of its base point is slightly smaller). */
+    const char *sw_exponents[] =
     {
         "000000000000000000000000000000000000000000000001", /* one */
-        "FFFFFFFFFFFFFFFFFFFFFFFF99DEF836146BC9B1B4D22830", /* N - 1 */
+        "FFFFFFFFFFFFFFFFFFFFFFFE26F2FC170F69466A74DEFD8C", /* n - 1 */
         "5EA6F389A38B8BC81E767753B15AA5569E1782E30ABE7D25", /* random */
         "400000000000000000000000000000000000000000000000", /* one and zeros */
         "7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF", /* all ones */
         "555555555555555555555555555555555555555555555555", /* 101010... */
     };
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
+    const char *m_exponents[] =
+    {
+        /* Valid private values for Curve25519. In a build with Curve448
+         * but not Curve25519, they will be adjusted in
+         * self_test_adjust_exponent(). */
+        "4000000000000000000000000000000000000000000000000000000000000000",
+        "5C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C30",
+        "5715ECCE24583F7A7023C24164390586842E816D7280A49EF6DF4EAE6B280BF8",
+        "41A2B017516F6D254E1F002BCCBADD54BE30F8CEC737A0E912B4963B6BA74460",
+        "5555555555555555555555555555555555555555555555555555555555555550",
+        "7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8",
+    };
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
     mbedtls_ecp_group_init( &grp );
     mbedtls_ecp_point_init( &R );
     mbedtls_ecp_point_init( &P );
     mbedtls_mpi_init( &m );
 
+#if defined(MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED)
     /* Use secp192r1 if available, or any available curve */
 #if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED)
     MBEDTLS_MPI_CHK( mbedtls_ecp_group_load( &grp, MBEDTLS_ECP_DP_SECP192R1 ) );
@@ -3344,81 +3438,48 @@
 #endif
 
     if( verbose != 0 )
-        mbedtls_printf( "  ECP test #1 (constant op_count, base point G): " );
-
+        mbedtls_printf( "  ECP SW test #1 (constant op_count, base point G): " );
     /* Do a dummy multiplication first to trigger precomputation */
     MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &m, 2 ) );
     MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &grp, &P, &m, &grp.G, NULL, NULL ) );
-
-    add_count = 0;
-    dbl_count = 0;
-    mul_count = 0;
-    MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &m, 16, exponents[0] ) );
-    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &grp, &R, &m, &grp.G, NULL, NULL ) );
-
-    for( i = 1; i < sizeof( exponents ) / sizeof( exponents[0] ); i++ )
-    {
-        add_c_prev = add_count;
-        dbl_c_prev = dbl_count;
-        mul_c_prev = mul_count;
-        add_count = 0;
-        dbl_count = 0;
-        mul_count = 0;
-
-        MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &m, 16, exponents[i] ) );
-        MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &grp, &R, &m, &grp.G, NULL, NULL ) );
-
-        if( add_count != add_c_prev ||
-            dbl_count != dbl_c_prev ||
-            mul_count != mul_c_prev )
-        {
-            if( verbose != 0 )
-                mbedtls_printf( "failed (%u)\n", (unsigned int) i );
-
-            ret = 1;
-            goto cleanup;
-        }
-    }
+    ret = self_test_point( verbose,
+                           &grp, &R, &m, &grp.G,
+                           sw_exponents,
+                           sizeof( sw_exponents ) / sizeof( sw_exponents[0] ));
+    if( ret != 0 )
+        goto cleanup;
 
     if( verbose != 0 )
-        mbedtls_printf( "passed\n" );
-
-    if( verbose != 0 )
-        mbedtls_printf( "  ECP test #2 (constant op_count, other point): " );
+        mbedtls_printf( "  ECP SW test #2 (constant op_count, other point): " );
     /* We computed P = 2G last time, use it */
+    ret = self_test_point( verbose,
+                           &grp, &R, &m, &P,
+                           sw_exponents,
+                           sizeof( sw_exponents ) / sizeof( sw_exponents[0] ));
+    if( ret != 0 )
+        goto cleanup;
 
-    add_count = 0;
-    dbl_count = 0;
-    mul_count = 0;
-    MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &m, 16, exponents[0] ) );
-    MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &grp, &R, &m, &P, NULL, NULL ) );
+    mbedtls_ecp_group_free( &grp );
+    mbedtls_ecp_point_free( &R );
+#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
 
-    for( i = 1; i < sizeof( exponents ) / sizeof( exponents[0] ); i++ )
-    {
-        add_c_prev = add_count;
-        dbl_c_prev = dbl_count;
-        mul_c_prev = mul_count;
-        add_count = 0;
-        dbl_count = 0;
-        mul_count = 0;
-
-        MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &m, 16, exponents[i] ) );
-        MBEDTLS_MPI_CHK( mbedtls_ecp_mul( &grp, &R, &m, &P, NULL, NULL ) );
-
-        if( add_count != add_c_prev ||
-            dbl_count != dbl_c_prev ||
-            mul_count != mul_c_prev )
-        {
-            if( verbose != 0 )
-                mbedtls_printf( "failed (%u)\n", (unsigned int) i );
-
-            ret = 1;
-            goto cleanup;
-        }
-    }
-
+#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
     if( verbose != 0 )
-        mbedtls_printf( "passed\n" );
+        mbedtls_printf( "  ECP Montgomery test (constant op_count): " );
+#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
+    MBEDTLS_MPI_CHK( mbedtls_ecp_group_load( &grp, MBEDTLS_ECP_DP_CURVE25519 ) );
+#elif defined(MBEDTLS_ECP_DP_CURVE448_ENABLED)
+    MBEDTLS_MPI_CHK( mbedtls_ecp_group_load( &grp, MBEDTLS_ECP_DP_CURVE448 ) );
+#else
+#error "MBEDTLS_ECP_MONTGOMERY_ENABLED is defined, but no curve is supported for self-test"
+#endif
+    ret = self_test_point( verbose,
+                           &grp, &R, &m, &grp.G,
+                           m_exponents,
+                           sizeof( m_exponents ) / sizeof( m_exponents[0] ));
+    if( ret != 0 )
+        goto cleanup;
+#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
 
 cleanup:
 
diff --git a/library/ecp_curves.c b/library/ecp_curves.c
index 92bbb89..137ef1e 100644
--- a/library/ecp_curves.c
+++ b/library/ecp_curves.c
@@ -553,6 +553,22 @@
 };
 #endif /* MBEDTLS_ECP_DP_BP512R1_ENABLED */
 
+#if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_BP256R1_ENABLED)   ||   \
+    defined(MBEDTLS_ECP_DP_BP384R1_ENABLED)   ||   \
+    defined(MBEDTLS_ECP_DP_BP512R1_ENABLED)   ||   \
+    defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) ||   \
+    defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED)
+/* For these curves, we build the group parameters dynamically. */
+#define ECP_LOAD_GROUP
+#endif
+
+#if defined(ECP_LOAD_GROUP)
 /*
  * Create an MPI from embedded constants
  * (assumes len is an exact multiple of sizeof mbedtls_mpi_uint)
@@ -603,6 +619,7 @@
 
     return( 0 );
 }
+#endif /* ECP_LOAD_GROUP */
 
 #if defined(MBEDTLS_ECP_NIST_OPTIM)
 /* Forward declarations */
@@ -644,6 +661,7 @@
 static int ecp_mod_p256k1( mbedtls_mpi * );
 #endif
 
+#if defined(ECP_LOAD_GROUP)
 #define LOAD_GROUP_A( G )   ecp_group_load( grp,            \
                             G ## _p,  sizeof( G ## _p  ),   \
                             G ## _a,  sizeof( G ## _a  ),   \
@@ -659,6 +677,7 @@
                             G ## _gx, sizeof( G ## _gx ),   \
                             G ## _gy, sizeof( G ## _gy ),   \
                             G ## _n,  sizeof( G ## _n  ) )
+#endif /* ECP_LOAD_GROUP */
 
 #if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
 /*
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index ec61d19..558016d 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -1001,6 +1001,25 @@
     if_build_succeeded tests/compat.sh -f ECDH -V NO -e 'ARCFOUR\|ARIA\|CAMELLIA\|CHACHA\|DES\|RC4'
 }
 
+component_test_everest_curve25519_only () {
+    msg "build: Everest ECDH context, only Curve25519" # ~ 6 min
+    scripts/config.py unset MBEDTLS_ECDH_LEGACY_CONTEXT
+    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    # Disable all curves
+    for c in $(sed -n 's/#define \(MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED\).*/\1/p' <"$CONFIG_H"); do
+        scripts/config.py unset "$c"
+    done
+    scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED
+
+    make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: Everest ECDH context, only Curve25519" # ~ 50s
+    make test
+}
+
 component_test_small_ssl_out_content_len () {
     msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
     scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
diff --git a/tests/scripts/curves.pl b/tests/scripts/curves.pl
index cd6ea0d..8db4430 100755
--- a/tests/scripts/curves.pl
+++ b/tests/scripts/curves.pl
@@ -2,7 +2,7 @@
 
 # curves.pl
 #
-# Copyright (c) 2014-2016, ARM Limited, All Rights Reserved
+# Copyright (c) 2014-2020, ARM Limited, All Rights Reserved
 # SPDX-License-Identifier: Apache-2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -21,21 +21,25 @@
 #
 # Purpose
 #
-# To test the code dependencies on individual curves in each test suite. This
-# is a verification step to ensure we don't ship test suites that do not work
-# for some build options.
+# The purpose of this test script is to validate that the library works
+# with any combination of elliptic curves. To this effect, build the library
+# and run the test suite with each tested combination of elliptic curves.
 #
-# The process is:
-#       for each possible curve
-#           build the library and test suites with the curve disabled
-#           execute the test suites
+# Testing all 2^n combinations would be too much, so we only test 2*n:
 #
-# And any test suite with the wrong dependencies will fail.
-#
+# 1. Test with a single curve, for each curve. This validates that the
+#    library works with any curve, and in particular that curve-specific
+#    code is guarded by the proper preprocessor conditionals.
+# 2. Test with all curves except one, for each curve. This validates that
+#    the test cases have correct dependencies. Testing with a single curve
+#    doesn't validate this for tests that require more than one curve.
+
 # Usage: tests/scripts/curves.pl
 #
 # This script should be executed from the root of the project directory.
 #
+# Only curves that are enabled in config.h will be tested.
+#
 # For best effect, run either with cmake disabled, or cmake enabled in a mode
 # that includes -Werror.
 
@@ -48,6 +52,25 @@
 my $config_h = 'include/mbedtls/config.h';
 my @curves = split( /\s+/, `sed -n -e '$sed_cmd' $config_h` );
 
+# Determine which curves support ECDSA by checking the dependencies of
+# ECDSA in check_config.h.
+my %curve_supports_ecdsa = ();
+{
+    local $/ = "";
+    local *CHECK_CONFIG;
+    open(CHECK_CONFIG, '<', 'include/mbedtls/check_config.h')
+        or die "open include/mbedtls/check_config.h: $!";
+    while (my $stanza = <CHECK_CONFIG>) {
+        if ($stanza =~ /\A#if defined\(MBEDTLS_ECDSA_C\)/) {
+            for my $curve ($stanza =~ /(?<=\()MBEDTLS_ECP_DP_\w+_ENABLED(?=\))/g) {
+                $curve_supports_ecdsa{$curve} = 1;
+            }
+            last;
+        }
+    }
+    close(CHECK_CONFIG);
+}
+
 system( "cp $config_h $config_h.bak" ) and die;
 sub abort {
     system( "mv $config_h.bak $config_h" ) and warn "$config_h not restored\n";
@@ -56,6 +79,46 @@
     exit 1;
 }
 
+# Disable all the curves. We'll then re-enable them one by one.
+for my $curve (@curves) {
+    system( "scripts/config.pl unset $curve" )
+        and abort "Failed to disable $curve\n";
+}
+# Depends on a specific curve. Also, ignore error if it wasn't enabled.
+system( "scripts/config.pl unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED" );
+
+# Test with only $curve enabled, for each $curve.
+for my $curve (@curves) {
+    system( "make clean" ) and die;
+
+    print "\n******************************************\n";
+    print "* Testing with only curve: $curve\n";
+    print "******************************************\n";
+    $ENV{MBEDTLS_TEST_CONFIGURATION} = "$curve";
+
+    system( "scripts/config.pl set $curve" )
+        and abort "Failed to enable $curve\n";
+
+    my $ecdsa = $curve_supports_ecdsa{$curve} ? "set" : "unset";
+    for my $dep (qw(MBEDTLS_ECDSA_C
+                    MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+                    MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)) {
+        system( "scripts/config.pl $ecdsa $dep" )
+            and abort "Failed to $ecdsa $dep\n";
+    }
+
+    system( "CFLAGS='-Werror -Wall -Wextra' make" )
+        and abort "Failed to build: only $curve\n";
+    system( "make test" )
+        and abort "Failed test suite: only $curve\n";
+
+    system( "scripts/config.pl unset $curve" )
+        and abort "Failed to disable $curve\n";
+}
+
+system( "cp $config_h.bak $config_h" ) and die "$config_h not restored\n";
+
+# Test with $curve disabled but the others enabled, for each $curve.
 for my $curve (@curves) {
     system( "cp $config_h.bak $config_h" ) and die "$config_h not restored\n";
     system( "make clean" ) and die;
@@ -71,10 +134,10 @@
     system( "scripts/config.py unset $curve" )
         and abort "Failed to disable $curve\n";
 
-    system( "CFLAGS='-Werror -Wall -Wextra' make lib" )
-        and abort "Failed to build lib: $curve\n";
-    system( "make" ) and abort "Failed to build tests: $curve\n";
-    system( "make test" ) and abort "Failed test suite: $curve\n";
+    system( "CFLAGS='-Werror -Wall -Wextra' make" )
+        and abort "Failed to build: all but $curve\n";
+    system( "make test" )
+        and abort "Failed test suite: all but $curve\n";
 
 }
 
diff --git a/tests/scripts/depends-pkalgs.pl b/tests/scripts/depends-pkalgs.pl
index 1577fee..0d5d297 100755
--- a/tests/scripts/depends-pkalgs.pl
+++ b/tests/scripts/depends-pkalgs.pl
@@ -50,7 +50,8 @@
 # Some algorithms can't be disabled on their own as others depend on them, so
 # we list those reverse-dependencies here to keep check_config.h happy.
 my %algs = (
-    'MBEDTLS_ECDSA_C'   => ['MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED'],
+    'MBEDTLS_ECDSA_C'   => ['MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED',
+                            'MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED'],
     'MBEDTLS_ECP_C'     => ['MBEDTLS_ECDSA_C',
                             'MBEDTLS_ECDH_C',
                             'MBEDTLS_ECJPAKE_C',
@@ -68,6 +69,7 @@
     'MBEDTLS_RSA_C'     => ['MBEDTLS_X509_RSASSA_PSS_SUPPORT',
                             'MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED',
                             'MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED',
+                            'MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED',
                             'MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED',
                             'MBEDTLS_KEY_EXCHANGE_RSA_ENABLED'],
 );