Removing yt ls step in READMEs of examples
diff --git a/yotta/data/example-tls-client/README.md b/yotta/data/example-tls-client/README.md
index beddd7b..4a798f6 100644
--- a/yotta/data/example-tls-client/README.md
+++ b/yotta/data/example-tls-client/README.md
@@ -34,27 +34,19 @@
yotta target frdm-k64f-gcc
```
-5. Check that there are no missing dependencies:
-
- ```
- $ yt ls
- ```
-
- If there are, yotta will list them in the terminal. Please install them before proceeding.
-
5. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
-7. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-tls-client.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
+6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-tls-client.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
-8. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
+7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
-9. Press the reset button on the board.
+8. Press the reset button on the board.
-10. The output in the terminal window should look like:
+9. The output in the terminal window should look like:
```
{timeout;120}}