test: remove previous tests for accelerated ECDSA/ECDH/ECJPAKE coverage analysis
All these EC based algs are now tested all at once in
test_psa_crypto_config_[accel/reference]_all_ec_algs_use_psa()
functions.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index d24da47..4f0360f 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -2171,245 +2171,6 @@
tests/ssl-opt.sh
}
-# Keep in sync with component_test_psa_crypto_config_accel_ecdsa_use_psa.
-# Used by tests/scripts/analyze_outcomes.py for comparison purposes.
-component_test_psa_crypto_config_reference_ecdsa_use_psa () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA + USE_PSA"
-
- # To be aligned with the accel component that needs this
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- config_psa_crypto_config_ecdsa_use_psa 0
-
- make
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA + USE_PSA"
- make test
-
- msg "test: ssl-opt.sh"
- tests/ssl-opt.sh
-}
-
-component_test_psa_crypto_config_accel_ecdh () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
-
- # Algorithms and key types to accelerate
- loc_accel_list="ALG_ECDH KEY_TYPE_ECC_KEY_PAIR KEY_TYPE_ECC_PUBLIC_KEY"
-
- # Configure and build the test driver library
- # -------------------------------------------
-
- # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having
- # partial support for cipher operations in the driver test library.
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
- make -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-
- # Configure and build the main libraries
- # --------------------------------------
-
- # Start from default config (no USE_PSA or TLS 1.3) + driver support
- scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
- scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-
- # Disable the module that's accelerated
- scripts/config.py unset MBEDTLS_ECDH_C
-
- # Disable things that depend on it
- scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
- scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
- scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
- scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
- scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-
- # Build the main library
- loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
- make CFLAGS="$ASAN_CFLAGS -O -Werror -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS"
-
- # Make sure this was not re-enabled by accident (additive config)
- not grep mbedtls_ecdh_ library/ecdh.o
-
- # Run the tests
- # -------------
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
- make test
-}
-
-# Auxiliary function to build config for ECDH with and without drivers.
-#
-# This is used by the two following components to ensure they always use the
-# same config, except for the use of driver or built-in ECDH:
-# - component_test_psa_crypto_config_accel_ecdh_use_psa;
-# - component_test_psa_crypto_config_reference_ecdh_use_psa.
-# This support comparing their test coverage with analyze_outcomes.py.
-config_psa_crypto_config_ecdh_use_psa () {
- DRIVER_ONLY="$1"
- # start with config full for maximum coverage (also enables USE_PSA)
- scripts/config.py full
- # enable support for drivers and configuring PSA-only algorithms
- scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
- scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
- if [ "$DRIVER_ONLY" -eq 1 ]; then
- # Disable the module that's accelerated
- scripts/config.py unset MBEDTLS_ECDH_C
- fi
-
- # Restartable feature is not yet supported by PSA. Once it will in
- # the future, the following line could be removed (see issues
- # 6061, 6332 and following ones)
- scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-}
-
-# Keep in sync with component_test_psa_crypto_config_reference_ecdh_use_psa
-component_test_psa_crypto_config_accel_ecdh_use_psa () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH + USE_PSA"
-
- # Algorithms and key types to accelerate
- loc_accel_list="ALG_ECDH KEY_TYPE_ECC_KEY_PAIR KEY_TYPE_ECC_PUBLIC_KEY"
-
- # Configure and build the test driver library
- # -------------------------------------------
-
- # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having
- # partial support for cipher operations in the driver test library.
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
- make -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-
- # Configure and build the main libraries
- # --------------------------------------
-
- # Use the same config as reference, only without built-in ECDH
- config_psa_crypto_config_ecdh_use_psa 1
-
- # Build the main library
- loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
- make CFLAGS="$ASAN_CFLAGS -O -Werror -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS"
-
- # Make sure this was not re-enabled by accident (additive config)
- not grep mbedtls_ecdh_ library/ecdh.o
-
- # Run the tests
- # -------------
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH + USE_PSA"
- make test
-
- msg "test: ssl-opt.sh"
- tests/ssl-opt.sh
-}
-
-# Keep in sync with component_test_psa_crypto_config_accel_ecdh_use_psa.
-# Used by tests/scripts/analyze_outcomes.py for comparison purposes.
-component_test_psa_crypto_config_reference_ecdh_use_psa () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with reference ECDH + USE_PSA"
-
- # To be aligned with the accel component that needs this
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- config_psa_crypto_config_ecdh_use_psa 0
-
- make
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with reference ECDH + USE_PSA"
- make test
-
- msg "test: ssl-opt.sh"
- tests/ssl-opt.sh
-}
-
-# Auxiliary function to build config for EC JPAKE with and without drivers.
-#
-# This is used by the two following components to ensure they always use the
-# same config, except for the use of driver or built-in ECJPAKE:
-# - component_test_psa_crypto_config_accel_ecjpake_use_psa;
-# - component_test_psa_crypto_config_reference_ecjpake_use_psa.
-# This support comparing their test coverage with analyze_outcomes.py.
-config_psa_crypto_config_ecjpake_use_psa () {
- DRIVER_ONLY="$1"
- # start with config full for maximum coverage (also enables USE_PSA)
- scripts/config.py full
- # enable support for drivers and configuring PSA-only algorithms
- scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
- scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
- if [ "$DRIVER_ONLY" -eq 1 ]; then
- # Disable the module that's accelerated
- scripts/config.py unset MBEDTLS_ECJPAKE_C
- fi
-
- # Dynamic secure element support is a deprecated feature and needs to be disabled here.
- # This is done to have the same form of psa_key_attributes_s for libdriver and library.
- scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-}
-
-# Keep in sync with component_test_psa_crypto_config_reference_ecjpake_use_psa
-component_test_psa_crypto_config_accel_ecjpake_use_psa () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECJPAKE + USE_PSA"
-
- # Algorithms and key types to accelerate
- loc_accel_list="ALG_JPAKE KEY_TYPE_ECC_KEY_PAIR KEY_TYPE_ECC_PUBLIC_KEY"
-
- # Configure and build the test driver library
- # -------------------------------------------
-
- # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having
- # partial support for cipher operations in the driver test library.
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
- make -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-
- # Configure and build the main libraries
- # --------------------------------------
-
- # Use the same config as reference, only without built-in JPAKE
- config_psa_crypto_config_ecjpake_use_psa 1
-
- # Build the main library
- loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
- make CFLAGS="$ASAN_CFLAGS -O -Werror -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS"
-
- # Make sure this was not re-enabled by accident (additive config)
- not grep mbedtls_ecjpake_ library/ecjpake.o
-
- # Run the tests
- # -------------
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated JPAKE + USE_PSA"
- make test
-
- msg "test: ssl-opt.sh"
- tests/ssl-opt.sh
-}
-
-# Keep in sync with component_test_psa_crypto_config_accel_ecjpake_use_psa.
-# Used by tests/scripts/analyze_outcomes.py for comparison purposes.
-component_test_psa_crypto_config_reference_ecjpake_use_psa () {
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with reference ECJPAKE + USE_PSA"
-
- # To be aligned with the accel component that needs this
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_STREAM_CIPHER
- scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_ECB_NO_PADDING
-
- config_psa_crypto_config_ecjpake_use_psa 0
-
- make
-
- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with reference ECJPAKE + USE_PSA"
- make test
-
- msg "test: ssl-opt.sh"
- tests/ssl-opt.sh
-}
-
# Auxiliary function to build config for all EC based algorithms (EC-JPAKE,
# ECDH, ECDSA) with and without drivers.
#