/**
 * \file chacha20.h
 *
 * \brief   This file contains ChaCha20 definitions and functions.
 *
 *          ChaCha20 is a stream cipher that can encrypt and decrypt
 *          information. ChaCha was created by Daniel Bernstein as a variant of
 *          its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf
 *          ChaCha20 is the variant with 20 rounds, that was also standardized
 *          in RFC 7539.
 *
 * \author Daniel King <damaki.gh@gmail.com>
 */

/*  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *  This file is part of Mbed TLS (https://tls.mbed.org)
 */

#ifndef MBEDTLS_CHACHA20_H
#define MBEDTLS_CHACHA20_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stdint.h>
#include <stddef.h>

#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA         -0x0051 /**< Invalid input parameter(s). */

/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
 * used. */
#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE    -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */

/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
 */
#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED        -0x0055  /**< Chacha20 hardware accelerator failed. */

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_CHACHA20_ALT)

typedef struct mbedtls_chacha20_context
{
    uint32_t state[16];          /*! The state (before round operations). */
    uint8_t  keystream8[64];     /*! Leftover keystream bytes. */
    size_t keystream_bytes_used; /*! Number of keystream bytes already used. */
}
mbedtls_chacha20_context;

#else  /* MBEDTLS_CHACHA20_ALT */
#include "chacha20_alt.h"
#endif /* MBEDTLS_CHACHA20_ALT */

/**
 * \brief           This function initializes the specified ChaCha20 context.
 *
 *                  It must be the first API called before using
 *                  the context.
 *
 *                  It is usually followed by calls to
 *                  \c mbedtls_chacha20_setkey() and
 *                  \c mbedtls_chacha20_starts(), then one or more calls to
 *                  to \c mbedtls_chacha20_update(), and finally to
 *                  \c mbedtls_chacha20_free().
 *
 * \param ctx       The ChaCha20 context to initialize.
 */
void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );

/**
 * \brief           This function releases and clears the specified ChaCha20 context.
 *
 * \param ctx       The ChaCha20 context to clear.
 */
void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );

/**
 * \brief           This function sets the encryption/decryption key.
 *
 * \note            After using this function, you must also call
 *                  \c mbedtls_chacha20_starts() to set a nonce before you
 *                  start encrypting/decrypting data with
 *                  \c mbedtls_chacha_update().
 *
 * \param ctx       The ChaCha20 context to which the key should be bound.
 * \param key       The encryption/decryption key. Must be 32 bytes in length.
 *
 * \return          \c 0 on success.
 * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
 */
int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
                             const unsigned char key[32] );

/**
 * \brief           This function sets the nonce and initial counter value.
 *
 * \note            A ChaCha20 context can be re-used with the same key by
 *                  calling this function to change the nonce.
 *
 * \warning         You must never use the same nonce twice with the same key.
 *                  This would void any confidentiality guarantees for the
 *                  messages encrypted with the same nonce and key.
 *
 * \param ctx       The ChaCha20 context to which the nonce should be bound.
 * \param nonce     The nonce. Must be 12 bytes in size.
 * \param counter   The initial counter value. This is usually 0.
 *
 * \return          \c 0 on success.
 * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
 *                  NULL.
 */
int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
                             const unsigned char nonce[12],
                             uint32_t counter );

/**
 * \brief           This function encrypts or decrypts data.
 *
 *                  Since ChaCha20 is a stream cipher, the same operation is
 *                  used for encrypting and decrypting data.
 *
 * \note            The \p input and \p output pointers must either be equal or
 *                  point to non-overlapping buffers.
 *
 * \note            \c mbedtls_chacha20_setkey() and
 *                  \c mbedtls_chacha20_starts() must be called at least once
 *                  to setup the context before this function can be called.
 *
 * \note            This function can be called multiple times in a row in
 *                  order to encrypt of decrypt data piecewise with the same
 *                  key and nonce.
 *
 * \param ctx       The ChaCha20 context to use for encryption or decryption.
 * \param size      The length of the input data in bytes.
 * \param input     The buffer holding the input data.
 *                  This pointer can be NULL if size == 0.
 * \param output    The buffer holding the output data.
 *                  Must be able to hold \p size bytes.
 *                  This pointer can be NULL if size == 0.
 *
 * \return          \c 0 on success.
 * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if the ctx, input, or
 *                  output pointers are NULL.
 */
int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
                             size_t size,
                             const unsigned char *input,
                             unsigned char *output );

/**
 * \brief           This function encrypts or decrypts data with ChaCha20 and
 *                  the given key and nonce.
 *
 *                  Since ChaCha20 is a stream cipher, the same operation is
 *                  used for encrypting and decrypting data.
 *
 * \warning         You must never use the same (key, nonce) pair more than
 *                  once. This would void any confidentiality guarantees for
 *                  the messages encrypted with the same nonce and key.
 *
 * \note            The \p input and \p output pointers must either be equal or
 *                  point to non-overlapping buffers.
 *
 * \param key       The encryption/decryption key. Must be 32 bytes in length.
 * \param nonce     The nonce. Must be 12 bytes in size.
 * \param counter   The initial counter value. This is usually 0.
 * \param size      The length of the input data in bytes.
 * \param input     The buffer holding the input data.
 *                  This pointer can be NULL if size == 0.
 * \param output    The buffer holding the output data.
 *                  Must be able to hold \p size bytes.
 *                  This pointer can be NULL if size == 0.
 *
 * \return          \c 0 on success.
 * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if key, nonce, input,
 *                  or output is NULL.
 */
int mbedtls_chacha20_crypt( const unsigned char key[32],
                            const unsigned char nonce[12],
                            uint32_t counter,
                            size_t size,
                            const unsigned char* input,
                            unsigned char* output );

#if defined(MBEDTLS_SELF_TEST)
/**
 * \brief           The ChaCha20 checkup routine.
 *
 * \return          \c 0 on success.
 * \return          \c 1 on failure.
 */
int mbedtls_chacha20_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif

#endif /* MBEDTLS_CHACHA20_H */