Initial Commit starting from:
- doxygen documentation for CMSIS
-- Core
-- Driver
-- General
-- Pack
-- SVD
- Driver
- RTOS
- Utilities
-- Pack Schema, Checker
-- SVD Schema, Checker and Example
Signed-off-by: Joachim Krech <joachim.krech@arm.com>
diff --git a/CMSIS/Utilities/ARM_Example.svd b/CMSIS/Utilities/ARM_Example.svd
new file mode 100644
index 0000000..2960cc9
--- /dev/null
+++ b/CMSIS/Utilities/ARM_Example.svd
@@ -0,0 +1,786 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- File naming: <part/series name>.svd -->
+
+<!--
+ Copyright (C) 2012-2014 ARM Limited. All rights reserved.
+
+ Purpose: System Viewer Description (SVD) Example (Schema Version 1.1)
+ This is a description of a none-existent and incomplete device
+ for demonstration purposes only.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ -->
+
+<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd" >
+ <vendor>ARM Ltd.</vendor> <!-- device vendor name -->
+ <vendorID>ARM</vendorID> <!-- device vendor short name -->
+ <name>ARM_Example</name> <!-- name of part-->
+ <series>ARMCM3</series> <!-- device series the device belongs to -->
+ <version>1.2</version> <!-- version of this description, adding CMSIS-SVD 1.1 tags -->
+ <description>ARM 32-bit Cortex-M3 Microcontroller based device, CPU clock up to 80MHz, etc. </description>
+ <licenseText> <!-- this license text will appear in header file. \n force line breaks -->
+ ARM Limited (ARM) is supplying this software for use with Cortex-M\n
+ processor based microcontroller, but can be equally used for other\n
+ suitable processor architectures. This file can be freely distributed.\n
+ Modifications to this file shall be clearly marked.\n
+ \n
+ THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n
+ OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n
+ ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR\n
+ CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ </licenseText>
+ <cpu> <!-- details about the cpu embedded in the device -->
+ <name>CM3</name>
+ <revision>r1p0</revision>
+ <endian>little</endian>
+ <mpuPresent>true</mpuPresent>
+ <fpuPresent>false</fpuPresent>
+ <nvicPrioBits>3</nvicPrioBits>
+ <vendorSystickConfig>false</vendorSystickConfig>
+ </cpu>
+ <addressUnitBits>8</addressUnitBits> <!-- byte addressable memory -->
+ <width>32</width> <!-- bus width is 32 bits -->
+ <!-- default settings implicitly inherited by subsequent sections -->
+ <size>32</size> <!-- this is the default size (number of bits) of all peripherals
+ and register that do not define "size" themselves -->
+ <access>read-write</access> <!-- default access permission for all subsequent registers -->
+ <resetValue>0x00000000</resetValue> <!-- by default all bits of the registers are initialized to 0 on reset -->
+ <resetMask>0xFFFFFFFF</resetMask> <!-- by default all 32Bits of the registers are used -->
+
+ <peripherals>
+ <!-- Timer 0 -->
+ <peripheral>
+ <name>TIMER0</name>
+ <version>1.0</version>
+ <description>32 Timer / Counter, counting up or down from different sources</description>
+ <groupName>TIMER</groupName>
+ <baseAddress>0x40010000</baseAddress>
+ <size>32</size>
+ <access>read-write</access>
+
+ <addressBlock>
+ <offset>0</offset>
+ <size>0x100</size>
+ <usage>registers</usage>
+ </addressBlock>
+
+ <interrupt>
+ <name>TIMER0</name>
+ <value>0</value>
+ </interrupt>
+
+ <registers>
+ <!-- CR: Control Register -->
+ <register>
+ <name>CR</name>
+ <description>Control Register</description>
+ <addressOffset>0x00</addressOffset>
+ <size>32</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0x1337F7F</resetMask>
+
+ <fields>
+ <!-- EN: Enable -->
+ <field>
+ <name>EN</name>
+ <description>Enable</description>
+ <bitRange>[0:0]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Disable</name>
+ <description>Timer is disabled and does not operate</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Enable</name>
+ <description>Timer is enabled and can operate</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- RST: Reset -->
+ <field>
+ <name>RST</name>
+ <description>Reset Timer</description>
+ <bitRange>[1:1]</bitRange>
+ <access>write-only</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>No_Action</name>
+ <description>Write as ZERO if necessary</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Reset_Timer</name>
+ <description>Reset the Timer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- CNT: Counting Direction -->
+ <field>
+ <name>CNT</name>
+ <description>Counting direction</description>
+ <bitRange>[3:2]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Count_UP</name>
+ <description>Timer Counts UO and wraps, if no STOP condition is set</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Count_DOWN</name>
+ <description>Timer Counts DOWN and wraps, if no STOP condition is set</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Toggle</name>
+ <description>Timer Counts up to MAX, then DOWN to ZERO, if no STOP condition is set</description>
+ <value>2</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- MODE: Operation Mode -->
+ <field>
+ <name>MODE</name>
+ <description>Operation Mode</description>
+ <bitRange>[6:4]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Continous</name>
+ <description>Timer runs continously</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Single_ZERO_MAX</name>
+ <description>Timer counts to 0x00 or 0xFFFFFFFF (depending on CNT) and stops</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Single_MATCH</name>
+ <description>Timer counts to the Value of MATCH Register and stops</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Reload_ZERO_MAX</name>
+ <description>Timer counts to 0x00 or 0xFFFFFFFF (depending on CNT), loads the RELOAD Value and continues</description>
+ <value>3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Reload_MATCH</name>
+ <description>Timer counts to the Value of MATCH Register, loads the RELOAD Value and continues</description>
+ <value>4</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- PSC: Use Prescaler -->
+ <field>
+ <name>PSC</name>
+ <description>Use Prescaler</description>
+ <bitRange>[7:7]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Disabled</name>
+ <description>Prescaler is not used</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Enabled</name>
+ <description>Prescaler is used as divider</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- CNTSRC: Timer / Counter Soruce Divider -->
+ <field>
+ <name>CNTSRC</name>
+ <description>Timer / Counter Source Divider</description>
+ <bitRange>[11:8]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>CAP_SRC</name>
+ <description>Capture Source is used directly</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div2</name>
+ <description>Capture Source is divided by 2</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div4</name>
+ <description>Capture Source is divided by 4</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div8</name>
+ <description>Capture Source is divided by 8</description>
+ <value>3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div16</name>
+ <description>Capture Source is divided by 16</description>
+ <value>4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div32</name>
+ <description>Capture Source is divided by 32</description>
+ <value>5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div64</name>
+ <description>Capture Source is divided by 64</description>
+ <value>6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div128</name>
+ <description>Capture Source is divided by 128</description>
+ <value>7</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>CAP_SRC_div256</name>
+ <description>Capture Source is divided by 256</description>
+ <value>8</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- CAPSRC: Timer / COunter Capture Source -->
+ <field>
+ <name>CAPSRC</name>
+ <description>Timer / Counter Capture Source</description>
+ <bitRange>[15:12]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>CClk</name>
+ <description>Core Clock</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_0</name>
+ <description>GPIO A, PIN 0</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_1</name>
+ <description>GPIO A, PIN 1</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_2</name>
+ <description>GPIO A, PIN 2</description>
+ <value>3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_3</name>
+ <description>GPIO A, PIN 3</description>
+ <value>4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_4</name>
+ <description>GPIO A, PIN 4</description>
+ <value>5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_5</name>
+ <description>GPIO A, PIN 5</description>
+ <value>6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_6</name>
+ <description>GPIO A, PIN 6</description>
+ <value>7</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOA_7</name>
+ <description>GPIO A, PIN 7</description>
+ <value>8</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOB_0</name>
+ <description>GPIO B, PIN 0</description>
+ <value>9</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOB_1</name>
+ <description>GPIO B, PIN 1</description>
+ <value>10</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOB_2</name>
+ <description>GPIO B, PIN 2</description>
+ <value>11</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOB_3</name>
+ <description>GPIO B, PIN 3</description>
+ <value>12</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOC_0</name>
+ <description>GPIO C, PIN 0</description>
+ <value>13</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOC_5</name>
+ <description>GPIO C, PIN 1</description>
+ <value>14</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>GPIOC_6</name>
+ <description>GPIO C, PIN 2</description>
+ <value>15</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- CAPEDGE: Capture Edge -->
+ <field>
+ <name>CAPEDGE</name>
+ <description>Capture Edge, select which Edge should result in a counter increment or decrement</description>
+ <bitRange>[17:16]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>RISING</name>
+ <description>Only rising edges result in a counter increment or decrement</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FALLING</name>
+ <description>Only falling edges result in a counter increment or decrement</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>BOTH</name>
+ <description>Rising and falling edges result in a counter increment or decrement</description>
+ <value>2</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- TRGEXT: Triggers an other Peripheral -->
+ <field>
+ <name>TRGEXT</name>
+ <description>Triggers an other Peripheral</description>
+ <bitRange>[21:20]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>NONE</name>
+ <description>No Trigger is emitted</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DMA1</name>
+ <description>DMA Controller 1 is triggered, dependant on MODE</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DMA2</name>
+ <description>DMA Controller 2 is triggered, dependant on MODE</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>UART</name>
+ <description>UART is triggered, dependant on MODE</description>
+ <value>3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- Reload: Selects Reload Register n -->
+ <field>
+ <name>RELOAD</name>
+ <description>Select RELOAD Register n to reload Timer on condition</description>
+ <bitRange>[25:24]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>RELOAD0</name>
+ <description>Selects Reload Register number 0</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD1</name>
+ <description>Selects Reload Register number 1</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD2</name>
+ <description>Selects Reload Register number 2</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD3</name>
+ <description>Selects Reload Register number 3</description>
+ <value>3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- IDR: Inc or dec Reload Register Selection -->
+ <field>
+ <name>IDR</name>
+ <description>Selects, if Reload Register number is incremented, decremented or not modified</description>
+ <bitRange>[27:26]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>KEEP</name>
+ <description>Reload Register number does not change automatically</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>INCREMENT</name>
+ <description>Reload Register number is incremented on each match</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DECREMENT</name>
+ <description>Reload Register number is decremented on each match</description>
+ <value>2</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- START: Starts / Stops the Timer/Counter -->
+ <field>
+ <name>S</name>
+ <description>Starts and Stops the Timer / Counter</description>
+ <bitRange>[31:31]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>STOP</name>
+ <description>Timer / Counter is stopped</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>START</name>
+ <description>Timer / Counter is started</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ </fields>
+ </register>
+
+ <!-- SR: Status Register -->
+ <register>
+ <name>SR</name>
+ <description>Status Register</description>
+ <addressOffset>0x04</addressOffset>
+ <size>16</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xD701</resetMask>
+
+ <fields>
+ <!-- RUN: Shows if Timer is running -->
+ <field>
+ <name>RUN</name>
+ <description>Shows if Timer is running or not</description>
+ <bitRange>[0:0]</bitRange>
+ <access>read-only</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Stopped</name>
+ <description>Timer is not running</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Running</name>
+ <description>Timer is running</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- MATCH: Shows if a Match was hit -->
+ <field>
+ <name>MATCH</name>
+ <description>Shows if the MATCH was hit</description>
+ <bitRange>[8:8]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>No_Match</name>
+ <description>The MATCH condition was not hit</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Match_Hit</name>
+ <description>The MATCH condition was hit</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- UN: Shows if an underflow occured -->
+ <field>
+ <name>UN</name>
+ <description>Shows if an underflow occured. This flag is sticky</description>
+ <bitRange>[9:9]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>No_Underflow</name>
+ <description>No underflow occured since last clear</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Underflow</name>
+ <description>A minimum of one underflow occured since last clear</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- OV: Shows if an overflow occured -->
+ <field>
+ <name>OV</name>
+ <description>Shows if an overflow occured. This flag is sticky</description>
+ <bitRange>[10:10]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>No_Overflow</name>
+ <description>No overflow occured since last clear</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Overflow_occured</name>
+ <description>A minimum of one overflow occured since last clear</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- RST: Shows if Timer is in RESET state -->
+ <field>
+ <name>RST</name>
+ <description>Shows if Timer is in RESET state</description>
+ <bitRange>[12:12]</bitRange>
+ <access>read-only</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Ready</name>
+ <description>Timer is not in RESET state and can operate</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>In_Reset</name>
+ <description>Timer is in RESET state and can not operate</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- RELOAD: Shows the currently active Reload Register -->
+ <field>
+ <name>RELOAD</name>
+ <description>Shows the currently active RELOAD Register</description>
+ <bitRange>[15:14]</bitRange>
+ <access>read-only</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>RELOAD0</name>
+ <description>Reload Register number 0 is active</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD1</name>
+ <description>Reload Register number 1 is active</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD2</name>
+ <description>Reload Register number 2 is active</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>RELOAD3</name>
+ <description>Reload Register number 3 is active</description>
+ <value>3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ </fields>
+ </register>
+
+ <!-- INT: Interrupt Register -->
+ <register>
+ <name>INT</name>
+ <description>Interrupt Register</description>
+ <addressOffset>0x10</addressOffset>
+ <size>16</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0x0771</resetMask>
+
+ <fields>
+ <!-- EN: Interrupt Enable -->
+ <field>
+ <name>EN</name>
+ <description>Interrupt Enable</description>
+ <bitRange>[0:0]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Disabled</name>
+ <description>Timer does not generate Interrupts</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Enable</name>
+ <description>Timer triggers the TIMERn Interrupt</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- MODE: Interrupt Mode -->
+ <field>
+ <name>MODE</name>
+ <description>Interrupt Mode, selects on which condition the Timer should generate an Interrupt</description>
+ <bitRange>[6:4]</bitRange>
+ <access>read-write</access>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Match</name>
+ <description>Timer generates an Interrupt when the MATCH condition is hit</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Underflow</name>
+ <description>Timer generates an Interrupt when it underflows</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Overflow</name>
+ <description>Timer generates an Interrupt when it overflows</description>
+ <value>2</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ </fields>
+ </register>
+
+ <!-- COUNT: Counter Register -->
+ <register>
+ <name>COUNT</name>
+ <description>The Counter Register reflects the actual Value of the Timer/Counter</description>
+ <addressOffset>0x20</addressOffset>
+ <size>32</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ </register>
+
+ <!-- MATCH: Match Register -->
+ <register>
+ <name>MATCH</name>
+ <description>The Match Register stores the compare Value for the MATCH condition</description>
+ <addressOffset>0x24</addressOffset>
+ <size>32</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ </register>
+
+ <!-- PRESCALE: Prescale Read Register -->
+ <register>
+ <name>PRESCALE_RD</name>
+ <description>The Prescale Register stores the Value for the prescaler. The cont event gets divided by this value</description>
+ <addressOffset>0x28</addressOffset>
+ <size>32</size>
+ <access>read-only</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ </register>
+
+ <!-- PRESCALE: Prescale Write Register -->
+ <register>
+ <name>PRESCALE_WR</name>
+ <description>The Prescale Register stores the Value for the prescaler. The cont event gets divided by this value</description>
+ <addressOffset>0x28</addressOffset>
+ <size>32</size>
+ <access>write-only</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ </register>
+
+
+ <!-- RELOAD: Array of Reload Register with 4 elements-->
+ <register>
+ <dim>4</dim>
+ <dimIncrement>4</dimIncrement>
+ <dimIndex>0,1,2,3</dimIndex>
+ <name>RELOAD[%s]</name>
+ <description>The Reload Register stores the Value the COUNT Register gets reloaded on a when a condition was met.</description>
+ <addressOffset>0x50</addressOffset>
+ <size>32</size>
+ <access>read-write</access>
+ <resetValue>0x00000000</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ </register>
+ </registers>
+ </peripheral>
+
+ <!-- Timer 1 -->
+ <peripheral derivedFrom="TIMER0">
+ <name>TIMER1</name>
+ <baseAddress>0x40010100</baseAddress>
+ <interrupt>
+ <name>TIMER1</name>
+ <value>4</value>
+ </interrupt>
+ </peripheral>
+
+ <!-- Timer 2 -->
+ <peripheral derivedFrom="TIMER0">
+ <name>TIMER2</name>
+ <baseAddress>0x40010200</baseAddress>
+ <interrupt>
+ <name>TIMER2</name>
+ <value>6</value>
+ </interrupt>
+ </peripheral>
+ </peripherals>
+</device>