Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /** |
| 3 | * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer |
| 4 | * |
| 5 | * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 6 | * http://www.samsung.com |
| 7 | * |
| 8 | * Author: Anton Tikhomirov <av.tikhomirov@samsung.com> |
| 9 | */ |
| 10 | |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/kernel.h> |
| 13 | #include <linux/slab.h> |
| 14 | #include <linux/platform_device.h> |
| 15 | #include <linux/clk.h> |
| 16 | #include <linux/usb/otg.h> |
| 17 | #include <linux/usb/usb_phy_generic.h> |
| 18 | #include <linux/of.h> |
| 19 | #include <linux/of_platform.h> |
| 20 | #include <linux/regulator/consumer.h> |
| 21 | |
| 22 | struct dwc3_exynos { |
| 23 | struct platform_device *usb2_phy; |
| 24 | struct platform_device *usb3_phy; |
| 25 | struct device *dev; |
| 26 | |
| 27 | struct clk *clk; |
| 28 | struct clk *susp_clk; |
| 29 | struct clk *axius_clk; |
| 30 | |
| 31 | struct regulator *vdd33; |
| 32 | struct regulator *vdd10; |
| 33 | }; |
| 34 | |
| 35 | static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) |
| 36 | { |
| 37 | struct usb_phy_generic_platform_data pdata; |
| 38 | struct platform_device *pdev; |
| 39 | int ret; |
| 40 | |
| 41 | memset(&pdata, 0x00, sizeof(pdata)); |
| 42 | |
| 43 | pdev = platform_device_alloc("usb_phy_generic", PLATFORM_DEVID_AUTO); |
| 44 | if (!pdev) |
| 45 | return -ENOMEM; |
| 46 | |
| 47 | exynos->usb2_phy = pdev; |
| 48 | pdata.type = USB_PHY_TYPE_USB2; |
| 49 | pdata.gpio_reset = -1; |
| 50 | |
| 51 | ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata)); |
| 52 | if (ret) |
| 53 | goto err1; |
| 54 | |
| 55 | pdev = platform_device_alloc("usb_phy_generic", PLATFORM_DEVID_AUTO); |
| 56 | if (!pdev) { |
| 57 | ret = -ENOMEM; |
| 58 | goto err1; |
| 59 | } |
| 60 | |
| 61 | exynos->usb3_phy = pdev; |
| 62 | pdata.type = USB_PHY_TYPE_USB3; |
| 63 | |
| 64 | ret = platform_device_add_data(exynos->usb3_phy, &pdata, sizeof(pdata)); |
| 65 | if (ret) |
| 66 | goto err2; |
| 67 | |
| 68 | ret = platform_device_add(exynos->usb2_phy); |
| 69 | if (ret) |
| 70 | goto err2; |
| 71 | |
| 72 | ret = platform_device_add(exynos->usb3_phy); |
| 73 | if (ret) |
| 74 | goto err3; |
| 75 | |
| 76 | return 0; |
| 77 | |
| 78 | err3: |
| 79 | platform_device_del(exynos->usb2_phy); |
| 80 | |
| 81 | err2: |
| 82 | platform_device_put(exynos->usb3_phy); |
| 83 | |
| 84 | err1: |
| 85 | platform_device_put(exynos->usb2_phy); |
| 86 | |
| 87 | return ret; |
| 88 | } |
| 89 | |
| 90 | static int dwc3_exynos_remove_child(struct device *dev, void *unused) |
| 91 | { |
| 92 | struct platform_device *pdev = to_platform_device(dev); |
| 93 | |
| 94 | platform_device_unregister(pdev); |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | static int dwc3_exynos_probe(struct platform_device *pdev) |
| 100 | { |
| 101 | struct dwc3_exynos *exynos; |
| 102 | struct device *dev = &pdev->dev; |
| 103 | struct device_node *node = dev->of_node; |
| 104 | |
| 105 | int ret; |
| 106 | |
| 107 | exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL); |
| 108 | if (!exynos) |
| 109 | return -ENOMEM; |
| 110 | |
| 111 | platform_set_drvdata(pdev, exynos); |
| 112 | |
| 113 | exynos->dev = dev; |
| 114 | |
| 115 | exynos->clk = devm_clk_get(dev, "usbdrd30"); |
| 116 | if (IS_ERR(exynos->clk)) { |
| 117 | dev_err(dev, "couldn't get clock\n"); |
| 118 | return -EINVAL; |
| 119 | } |
| 120 | ret = clk_prepare_enable(exynos->clk); |
| 121 | if (ret) |
| 122 | return ret; |
| 123 | |
| 124 | exynos->susp_clk = devm_clk_get(dev, "usbdrd30_susp_clk"); |
| 125 | if (IS_ERR(exynos->susp_clk)) |
| 126 | exynos->susp_clk = NULL; |
| 127 | ret = clk_prepare_enable(exynos->susp_clk); |
| 128 | if (ret) |
| 129 | goto susp_clk_err; |
| 130 | |
| 131 | if (of_device_is_compatible(node, "samsung,exynos7-dwusb3")) { |
| 132 | exynos->axius_clk = devm_clk_get(dev, "usbdrd30_axius_clk"); |
| 133 | if (IS_ERR(exynos->axius_clk)) { |
| 134 | dev_err(dev, "no AXI UpScaler clk specified\n"); |
| 135 | ret = -ENODEV; |
| 136 | goto axius_clk_err; |
| 137 | } |
| 138 | ret = clk_prepare_enable(exynos->axius_clk); |
| 139 | if (ret) |
| 140 | goto axius_clk_err; |
| 141 | } else { |
| 142 | exynos->axius_clk = NULL; |
| 143 | } |
| 144 | |
| 145 | exynos->vdd33 = devm_regulator_get(dev, "vdd33"); |
| 146 | if (IS_ERR(exynos->vdd33)) { |
| 147 | ret = PTR_ERR(exynos->vdd33); |
| 148 | goto vdd33_err; |
| 149 | } |
| 150 | ret = regulator_enable(exynos->vdd33); |
| 151 | if (ret) { |
| 152 | dev_err(dev, "Failed to enable VDD33 supply\n"); |
| 153 | goto vdd33_err; |
| 154 | } |
| 155 | |
| 156 | exynos->vdd10 = devm_regulator_get(dev, "vdd10"); |
| 157 | if (IS_ERR(exynos->vdd10)) { |
| 158 | ret = PTR_ERR(exynos->vdd10); |
| 159 | goto vdd10_err; |
| 160 | } |
| 161 | ret = regulator_enable(exynos->vdd10); |
| 162 | if (ret) { |
| 163 | dev_err(dev, "Failed to enable VDD10 supply\n"); |
| 164 | goto vdd10_err; |
| 165 | } |
| 166 | |
| 167 | ret = dwc3_exynos_register_phys(exynos); |
| 168 | if (ret) { |
| 169 | dev_err(dev, "couldn't register PHYs\n"); |
| 170 | goto phys_err; |
| 171 | } |
| 172 | |
| 173 | if (node) { |
| 174 | ret = of_platform_populate(node, NULL, NULL, dev); |
| 175 | if (ret) { |
| 176 | dev_err(dev, "failed to add dwc3 core\n"); |
| 177 | goto populate_err; |
| 178 | } |
| 179 | } else { |
| 180 | dev_err(dev, "no device node, failed to add dwc3 core\n"); |
| 181 | ret = -ENODEV; |
| 182 | goto populate_err; |
| 183 | } |
| 184 | |
| 185 | return 0; |
| 186 | |
| 187 | populate_err: |
| 188 | platform_device_unregister(exynos->usb2_phy); |
| 189 | platform_device_unregister(exynos->usb3_phy); |
| 190 | phys_err: |
| 191 | regulator_disable(exynos->vdd10); |
| 192 | vdd10_err: |
| 193 | regulator_disable(exynos->vdd33); |
| 194 | vdd33_err: |
| 195 | clk_disable_unprepare(exynos->axius_clk); |
| 196 | axius_clk_err: |
| 197 | clk_disable_unprepare(exynos->susp_clk); |
| 198 | susp_clk_err: |
| 199 | clk_disable_unprepare(exynos->clk); |
| 200 | return ret; |
| 201 | } |
| 202 | |
| 203 | static int dwc3_exynos_remove(struct platform_device *pdev) |
| 204 | { |
| 205 | struct dwc3_exynos *exynos = platform_get_drvdata(pdev); |
| 206 | |
| 207 | device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); |
| 208 | platform_device_unregister(exynos->usb2_phy); |
| 209 | platform_device_unregister(exynos->usb3_phy); |
| 210 | |
| 211 | clk_disable_unprepare(exynos->axius_clk); |
| 212 | clk_disable_unprepare(exynos->susp_clk); |
| 213 | clk_disable_unprepare(exynos->clk); |
| 214 | |
| 215 | regulator_disable(exynos->vdd33); |
| 216 | regulator_disable(exynos->vdd10); |
| 217 | |
| 218 | return 0; |
| 219 | } |
| 220 | |
| 221 | static const struct of_device_id exynos_dwc3_match[] = { |
| 222 | { .compatible = "samsung,exynos5250-dwusb3" }, |
| 223 | { .compatible = "samsung,exynos7-dwusb3" }, |
| 224 | {}, |
| 225 | }; |
| 226 | MODULE_DEVICE_TABLE(of, exynos_dwc3_match); |
| 227 | |
| 228 | #ifdef CONFIG_PM_SLEEP |
| 229 | static int dwc3_exynos_suspend(struct device *dev) |
| 230 | { |
| 231 | struct dwc3_exynos *exynos = dev_get_drvdata(dev); |
| 232 | |
| 233 | clk_disable(exynos->axius_clk); |
| 234 | clk_disable(exynos->clk); |
| 235 | |
| 236 | regulator_disable(exynos->vdd33); |
| 237 | regulator_disable(exynos->vdd10); |
| 238 | |
| 239 | return 0; |
| 240 | } |
| 241 | |
| 242 | static int dwc3_exynos_resume(struct device *dev) |
| 243 | { |
| 244 | struct dwc3_exynos *exynos = dev_get_drvdata(dev); |
| 245 | int ret; |
| 246 | |
| 247 | ret = regulator_enable(exynos->vdd33); |
| 248 | if (ret) { |
| 249 | dev_err(dev, "Failed to enable VDD33 supply\n"); |
| 250 | return ret; |
| 251 | } |
| 252 | ret = regulator_enable(exynos->vdd10); |
| 253 | if (ret) { |
| 254 | dev_err(dev, "Failed to enable VDD10 supply\n"); |
| 255 | return ret; |
| 256 | } |
| 257 | |
| 258 | clk_enable(exynos->clk); |
| 259 | clk_enable(exynos->axius_clk); |
| 260 | |
| 261 | /* runtime set active to reflect active state. */ |
| 262 | pm_runtime_disable(dev); |
| 263 | pm_runtime_set_active(dev); |
| 264 | pm_runtime_enable(dev); |
| 265 | |
| 266 | return 0; |
| 267 | } |
| 268 | |
| 269 | static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = { |
| 270 | SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume) |
| 271 | }; |
| 272 | |
| 273 | #define DEV_PM_OPS (&dwc3_exynos_dev_pm_ops) |
| 274 | #else |
| 275 | #define DEV_PM_OPS NULL |
| 276 | #endif /* CONFIG_PM_SLEEP */ |
| 277 | |
| 278 | static struct platform_driver dwc3_exynos_driver = { |
| 279 | .probe = dwc3_exynos_probe, |
| 280 | .remove = dwc3_exynos_remove, |
| 281 | .driver = { |
| 282 | .name = "exynos-dwc3", |
| 283 | .of_match_table = exynos_dwc3_match, |
| 284 | .pm = DEV_PM_OPS, |
| 285 | }, |
| 286 | }; |
| 287 | |
| 288 | module_platform_driver(dwc3_exynos_driver); |
| 289 | |
| 290 | MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>"); |
| 291 | MODULE_LICENSE("GPL v2"); |
| 292 | MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer"); |