Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * NOP USB transceiver for all USB transceiver which are either built-in |
| 4 | * into USB IP or which are mostly autonomous. |
| 5 | * |
| 6 | * Copyright (C) 2009 Texas Instruments Inc |
| 7 | * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> |
| 8 | * |
| 9 | * Current status: |
| 10 | * This provides a "nop" transceiver for PHYs which are |
| 11 | * autonomous such as isp1504, isp1707, etc. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | #include <linux/dma-mapping.h> |
| 17 | #include <linux/usb/gadget.h> |
| 18 | #include <linux/usb/otg.h> |
| 19 | #include <linux/usb/usb_phy_generic.h> |
| 20 | #include <linux/slab.h> |
| 21 | #include <linux/clk.h> |
| 22 | #include <linux/regulator/consumer.h> |
| 23 | #include <linux/of.h> |
| 24 | #include <linux/of_gpio.h> |
| 25 | #include <linux/gpio.h> |
| 26 | #include <linux/delay.h> |
| 27 | |
| 28 | #include "phy-generic.h" |
| 29 | |
| 30 | #define VBUS_IRQ_FLAGS \ |
| 31 | (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ |
| 32 | IRQF_ONESHOT) |
| 33 | |
| 34 | struct platform_device *usb_phy_generic_register(void) |
| 35 | { |
| 36 | return platform_device_register_simple("usb_phy_generic", |
| 37 | PLATFORM_DEVID_AUTO, NULL, 0); |
| 38 | } |
| 39 | EXPORT_SYMBOL_GPL(usb_phy_generic_register); |
| 40 | |
| 41 | void usb_phy_generic_unregister(struct platform_device *pdev) |
| 42 | { |
| 43 | platform_device_unregister(pdev); |
| 44 | } |
| 45 | EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); |
| 46 | |
| 47 | static int nop_set_suspend(struct usb_phy *x, int suspend) |
| 48 | { |
| 49 | struct usb_phy_generic *nop = dev_get_drvdata(x->dev); |
| 50 | |
| 51 | if (!IS_ERR(nop->clk)) { |
| 52 | if (suspend) |
| 53 | clk_disable_unprepare(nop->clk); |
| 54 | else |
| 55 | clk_prepare_enable(nop->clk); |
| 56 | } |
| 57 | |
| 58 | return 0; |
| 59 | } |
| 60 | |
| 61 | static void nop_reset(struct usb_phy_generic *nop) |
| 62 | { |
| 63 | if (!nop->gpiod_reset) |
| 64 | return; |
| 65 | |
| 66 | gpiod_set_value_cansleep(nop->gpiod_reset, 1); |
| 67 | usleep_range(10000, 20000); |
| 68 | gpiod_set_value_cansleep(nop->gpiod_reset, 0); |
| 69 | } |
| 70 | |
| 71 | /* interface to regulator framework */ |
| 72 | static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) |
| 73 | { |
| 74 | struct regulator *vbus_draw = nop->vbus_draw; |
| 75 | int enabled; |
| 76 | int ret; |
| 77 | |
| 78 | if (!vbus_draw) |
| 79 | return; |
| 80 | |
| 81 | enabled = nop->vbus_draw_enabled; |
| 82 | if (mA) { |
| 83 | regulator_set_current_limit(vbus_draw, 0, 1000 * mA); |
| 84 | if (!enabled) { |
| 85 | ret = regulator_enable(vbus_draw); |
| 86 | if (ret < 0) |
| 87 | return; |
| 88 | nop->vbus_draw_enabled = 1; |
| 89 | } |
| 90 | } else { |
| 91 | if (enabled) { |
| 92 | ret = regulator_disable(vbus_draw); |
| 93 | if (ret < 0) |
| 94 | return; |
| 95 | nop->vbus_draw_enabled = 0; |
| 96 | } |
| 97 | } |
| 98 | nop->mA = mA; |
| 99 | } |
| 100 | |
| 101 | |
| 102 | static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) |
| 103 | { |
| 104 | struct usb_phy_generic *nop = data; |
| 105 | struct usb_otg *otg = nop->phy.otg; |
| 106 | int vbus, status; |
| 107 | |
| 108 | vbus = gpiod_get_value(nop->gpiod_vbus); |
| 109 | if ((vbus ^ nop->vbus) == 0) |
| 110 | return IRQ_HANDLED; |
| 111 | nop->vbus = vbus; |
| 112 | |
| 113 | if (vbus) { |
| 114 | status = USB_EVENT_VBUS; |
| 115 | otg->state = OTG_STATE_B_PERIPHERAL; |
| 116 | nop->phy.last_event = status; |
| 117 | |
| 118 | /* drawing a "unit load" is *always* OK, except for OTG */ |
| 119 | nop_set_vbus_draw(nop, 100); |
| 120 | |
| 121 | atomic_notifier_call_chain(&nop->phy.notifier, status, |
| 122 | otg->gadget); |
| 123 | } else { |
| 124 | nop_set_vbus_draw(nop, 0); |
| 125 | |
| 126 | status = USB_EVENT_NONE; |
| 127 | otg->state = OTG_STATE_B_IDLE; |
| 128 | nop->phy.last_event = status; |
| 129 | |
| 130 | atomic_notifier_call_chain(&nop->phy.notifier, status, |
| 131 | otg->gadget); |
| 132 | } |
| 133 | return IRQ_HANDLED; |
| 134 | } |
| 135 | |
| 136 | int usb_gen_phy_init(struct usb_phy *phy) |
| 137 | { |
| 138 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); |
| 139 | int ret; |
| 140 | |
| 141 | if (!IS_ERR(nop->vcc)) { |
| 142 | if (regulator_enable(nop->vcc)) |
| 143 | dev_err(phy->dev, "Failed to enable power\n"); |
| 144 | } |
| 145 | |
| 146 | if (!IS_ERR(nop->clk)) { |
| 147 | ret = clk_prepare_enable(nop->clk); |
| 148 | if (ret) |
| 149 | return ret; |
| 150 | } |
| 151 | |
| 152 | nop_reset(nop); |
| 153 | |
| 154 | return 0; |
| 155 | } |
| 156 | EXPORT_SYMBOL_GPL(usb_gen_phy_init); |
| 157 | |
| 158 | void usb_gen_phy_shutdown(struct usb_phy *phy) |
| 159 | { |
| 160 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); |
| 161 | |
| 162 | gpiod_set_value_cansleep(nop->gpiod_reset, 1); |
| 163 | |
| 164 | if (!IS_ERR(nop->clk)) |
| 165 | clk_disable_unprepare(nop->clk); |
| 166 | |
| 167 | if (!IS_ERR(nop->vcc)) { |
| 168 | if (regulator_disable(nop->vcc)) |
| 169 | dev_err(phy->dev, "Failed to disable power\n"); |
| 170 | } |
| 171 | } |
| 172 | EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown); |
| 173 | |
| 174 | static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) |
| 175 | { |
| 176 | if (!otg) |
| 177 | return -ENODEV; |
| 178 | |
| 179 | if (!gadget) { |
| 180 | otg->gadget = NULL; |
| 181 | return -ENODEV; |
| 182 | } |
| 183 | |
| 184 | otg->gadget = gadget; |
| 185 | if (otg->state == OTG_STATE_B_PERIPHERAL) |
| 186 | atomic_notifier_call_chain(&otg->usb_phy->notifier, |
| 187 | USB_EVENT_VBUS, otg->gadget); |
| 188 | else |
| 189 | otg->state = OTG_STATE_B_IDLE; |
| 190 | return 0; |
| 191 | } |
| 192 | |
| 193 | static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) |
| 194 | { |
| 195 | if (!otg) |
| 196 | return -ENODEV; |
| 197 | |
| 198 | if (!host) { |
| 199 | otg->host = NULL; |
| 200 | return -ENODEV; |
| 201 | } |
| 202 | |
| 203 | otg->host = host; |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, |
| 208 | struct usb_phy_generic_platform_data *pdata) |
| 209 | { |
| 210 | enum usb_phy_type type = USB_PHY_TYPE_USB2; |
| 211 | int err = 0; |
| 212 | |
| 213 | u32 clk_rate = 0; |
| 214 | bool needs_vcc = false, needs_clk = false; |
| 215 | |
| 216 | if (dev->of_node) { |
| 217 | struct device_node *node = dev->of_node; |
| 218 | |
| 219 | if (of_property_read_u32(node, "clock-frequency", &clk_rate)) |
| 220 | clk_rate = 0; |
| 221 | |
| 222 | needs_vcc = of_property_read_bool(node, "vcc-supply"); |
| 223 | needs_clk = of_property_read_bool(node, "clocks"); |
| 224 | nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", |
| 225 | GPIOD_ASIS); |
| 226 | err = PTR_ERR_OR_ZERO(nop->gpiod_reset); |
| 227 | if (!err) { |
| 228 | nop->gpiod_vbus = devm_gpiod_get_optional(dev, |
| 229 | "vbus-detect", |
| 230 | GPIOD_ASIS); |
| 231 | err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); |
| 232 | } |
| 233 | } else if (pdata) { |
| 234 | type = pdata->type; |
| 235 | clk_rate = pdata->clk_rate; |
| 236 | needs_vcc = pdata->needs_vcc; |
| 237 | if (gpio_is_valid(pdata->gpio_reset)) { |
| 238 | err = devm_gpio_request_one(dev, pdata->gpio_reset, |
| 239 | GPIOF_ACTIVE_LOW, |
| 240 | dev_name(dev)); |
| 241 | if (!err) |
| 242 | nop->gpiod_reset = |
| 243 | gpio_to_desc(pdata->gpio_reset); |
| 244 | } |
| 245 | nop->gpiod_vbus = pdata->gpiod_vbus; |
| 246 | } |
| 247 | |
| 248 | if (err == -EPROBE_DEFER) |
| 249 | return -EPROBE_DEFER; |
| 250 | if (err) { |
| 251 | dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); |
| 252 | return err; |
| 253 | } |
| 254 | if (nop->gpiod_reset) |
| 255 | gpiod_direction_output(nop->gpiod_reset, 1); |
| 256 | |
| 257 | nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), |
| 258 | GFP_KERNEL); |
| 259 | if (!nop->phy.otg) |
| 260 | return -ENOMEM; |
| 261 | |
| 262 | nop->clk = devm_clk_get(dev, "main_clk"); |
| 263 | if (IS_ERR(nop->clk)) { |
| 264 | dev_dbg(dev, "Can't get phy clock: %ld\n", |
| 265 | PTR_ERR(nop->clk)); |
| 266 | if (needs_clk) |
| 267 | return PTR_ERR(nop->clk); |
| 268 | } |
| 269 | |
| 270 | if (!IS_ERR(nop->clk) && clk_rate) { |
| 271 | err = clk_set_rate(nop->clk, clk_rate); |
| 272 | if (err) { |
| 273 | dev_err(dev, "Error setting clock rate\n"); |
| 274 | return err; |
| 275 | } |
| 276 | } |
| 277 | |
| 278 | nop->vcc = devm_regulator_get(dev, "vcc"); |
| 279 | if (IS_ERR(nop->vcc)) { |
| 280 | dev_dbg(dev, "Error getting vcc regulator: %ld\n", |
| 281 | PTR_ERR(nop->vcc)); |
| 282 | if (needs_vcc) |
| 283 | return -EPROBE_DEFER; |
| 284 | } |
| 285 | |
| 286 | nop->dev = dev; |
| 287 | nop->phy.dev = nop->dev; |
| 288 | nop->phy.label = "nop-xceiv"; |
| 289 | nop->phy.set_suspend = nop_set_suspend; |
| 290 | nop->phy.type = type; |
| 291 | |
| 292 | nop->phy.otg->state = OTG_STATE_UNDEFINED; |
| 293 | nop->phy.otg->usb_phy = &nop->phy; |
| 294 | nop->phy.otg->set_host = nop_set_host; |
| 295 | nop->phy.otg->set_peripheral = nop_set_peripheral; |
| 296 | |
| 297 | return 0; |
| 298 | } |
| 299 | EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); |
| 300 | |
| 301 | static int usb_phy_generic_probe(struct platform_device *pdev) |
| 302 | { |
| 303 | struct device *dev = &pdev->dev; |
| 304 | struct usb_phy_generic *nop; |
| 305 | int err; |
| 306 | |
| 307 | nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); |
| 308 | if (!nop) |
| 309 | return -ENOMEM; |
| 310 | |
| 311 | err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); |
| 312 | if (err) |
| 313 | return err; |
| 314 | if (nop->gpiod_vbus) { |
| 315 | err = devm_request_threaded_irq(&pdev->dev, |
| 316 | gpiod_to_irq(nop->gpiod_vbus), |
| 317 | NULL, nop_gpio_vbus_thread, |
| 318 | VBUS_IRQ_FLAGS, "vbus_detect", |
| 319 | nop); |
| 320 | if (err) { |
| 321 | dev_err(&pdev->dev, "can't request irq %i, err: %d\n", |
| 322 | gpiod_to_irq(nop->gpiod_vbus), err); |
| 323 | return err; |
| 324 | } |
| 325 | nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? |
| 326 | OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; |
| 327 | } |
| 328 | |
| 329 | nop->phy.init = usb_gen_phy_init; |
| 330 | nop->phy.shutdown = usb_gen_phy_shutdown; |
| 331 | |
| 332 | err = usb_add_phy_dev(&nop->phy); |
| 333 | if (err) { |
| 334 | dev_err(&pdev->dev, "can't register transceiver, err: %d\n", |
| 335 | err); |
| 336 | return err; |
| 337 | } |
| 338 | |
| 339 | platform_set_drvdata(pdev, nop); |
| 340 | |
| 341 | return 0; |
| 342 | } |
| 343 | |
| 344 | static int usb_phy_generic_remove(struct platform_device *pdev) |
| 345 | { |
| 346 | struct usb_phy_generic *nop = platform_get_drvdata(pdev); |
| 347 | |
| 348 | usb_remove_phy(&nop->phy); |
| 349 | |
| 350 | return 0; |
| 351 | } |
| 352 | |
| 353 | static const struct of_device_id nop_xceiv_dt_ids[] = { |
| 354 | { .compatible = "usb-nop-xceiv" }, |
| 355 | { } |
| 356 | }; |
| 357 | |
| 358 | MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); |
| 359 | |
| 360 | static struct platform_driver usb_phy_generic_driver = { |
| 361 | .probe = usb_phy_generic_probe, |
| 362 | .remove = usb_phy_generic_remove, |
| 363 | .driver = { |
| 364 | .name = "usb_phy_generic", |
| 365 | .of_match_table = nop_xceiv_dt_ids, |
| 366 | }, |
| 367 | }; |
| 368 | |
| 369 | static int __init usb_phy_generic_init(void) |
| 370 | { |
| 371 | return platform_driver_register(&usb_phy_generic_driver); |
| 372 | } |
| 373 | subsys_initcall(usb_phy_generic_init); |
| 374 | |
| 375 | static void __exit usb_phy_generic_exit(void) |
| 376 | { |
| 377 | platform_driver_unregister(&usb_phy_generic_driver); |
| 378 | } |
| 379 | module_exit(usb_phy_generic_exit); |
| 380 | |
| 381 | MODULE_ALIAS("platform:usb_phy_generic"); |
| 382 | MODULE_AUTHOR("Texas Instruments Inc"); |
| 383 | MODULE_DESCRIPTION("NOP USB Transceiver driver"); |
| 384 | MODULE_LICENSE("GPL"); |