David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2016 Texas Instruments |
| 4 | * Author: Jyri Sarha <jsarha@ti.com> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #include <linux/delay.h> |
| 8 | #include <linux/fwnode.h> |
| 9 | #include <linux/gpio/consumer.h> |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 10 | #include <linux/i2c.h> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 11 | #include <linux/irq.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/of_graph.h> |
| 14 | #include <linux/platform_device.h> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 15 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 16 | #include <drm/drm_atomic_helper.h> |
| 17 | #include <drm/drm_crtc.h> |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 18 | #include <drm/drm_print.h> |
| 19 | #include <drm/drm_probe_helper.h> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 20 | |
| 21 | #define HOTPLUG_DEBOUNCE_MS 1100 |
| 22 | |
| 23 | struct tfp410 { |
| 24 | struct drm_bridge bridge; |
| 25 | struct drm_connector connector; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 26 | unsigned int connector_type; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 27 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 28 | u32 bus_format; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 29 | struct i2c_adapter *ddc; |
| 30 | struct gpio_desc *hpd; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 31 | int hpd_irq; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 32 | struct delayed_work hpd_work; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 33 | struct gpio_desc *powerdown; |
| 34 | |
| 35 | struct drm_bridge_timings timings; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 36 | |
| 37 | struct device *dev; |
| 38 | }; |
| 39 | |
| 40 | static inline struct tfp410 * |
| 41 | drm_bridge_to_tfp410(struct drm_bridge *bridge) |
| 42 | { |
| 43 | return container_of(bridge, struct tfp410, bridge); |
| 44 | } |
| 45 | |
| 46 | static inline struct tfp410 * |
| 47 | drm_connector_to_tfp410(struct drm_connector *connector) |
| 48 | { |
| 49 | return container_of(connector, struct tfp410, connector); |
| 50 | } |
| 51 | |
| 52 | static int tfp410_get_modes(struct drm_connector *connector) |
| 53 | { |
| 54 | struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| 55 | struct edid *edid; |
| 56 | int ret; |
| 57 | |
| 58 | if (!dvi->ddc) |
| 59 | goto fallback; |
| 60 | |
| 61 | edid = drm_get_edid(connector, dvi->ddc); |
| 62 | if (!edid) { |
| 63 | DRM_INFO("EDID read failed. Fallback to standard modes\n"); |
| 64 | goto fallback; |
| 65 | } |
| 66 | |
| 67 | drm_connector_update_edid_property(connector, edid); |
| 68 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 69 | ret = drm_add_edid_modes(connector, edid); |
| 70 | |
| 71 | kfree(edid); |
| 72 | |
| 73 | return ret; |
| 74 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 75 | fallback: |
| 76 | /* No EDID, fallback on the XGA standard modes */ |
| 77 | ret = drm_add_modes_noedid(connector, 1920, 1200); |
| 78 | |
| 79 | /* And prefer a mode pretty much anything can handle */ |
| 80 | drm_set_preferred_mode(connector, 1024, 768); |
| 81 | |
| 82 | return ret; |
| 83 | } |
| 84 | |
| 85 | static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = { |
| 86 | .get_modes = tfp410_get_modes, |
| 87 | }; |
| 88 | |
| 89 | static enum drm_connector_status |
| 90 | tfp410_connector_detect(struct drm_connector *connector, bool force) |
| 91 | { |
| 92 | struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| 93 | |
| 94 | if (dvi->hpd) { |
| 95 | if (gpiod_get_value_cansleep(dvi->hpd)) |
| 96 | return connector_status_connected; |
| 97 | else |
| 98 | return connector_status_disconnected; |
| 99 | } |
| 100 | |
| 101 | if (dvi->ddc) { |
| 102 | if (drm_probe_ddc(dvi->ddc)) |
| 103 | return connector_status_connected; |
| 104 | else |
| 105 | return connector_status_disconnected; |
| 106 | } |
| 107 | |
| 108 | return connector_status_unknown; |
| 109 | } |
| 110 | |
| 111 | static const struct drm_connector_funcs tfp410_con_funcs = { |
| 112 | .detect = tfp410_connector_detect, |
| 113 | .fill_modes = drm_helper_probe_single_connector_modes, |
| 114 | .destroy = drm_connector_cleanup, |
| 115 | .reset = drm_atomic_helper_connector_reset, |
| 116 | .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| 117 | .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| 118 | }; |
| 119 | |
| 120 | static int tfp410_attach(struct drm_bridge *bridge) |
| 121 | { |
| 122 | struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| 123 | int ret; |
| 124 | |
| 125 | if (!bridge->encoder) { |
| 126 | dev_err(dvi->dev, "Missing encoder\n"); |
| 127 | return -ENODEV; |
| 128 | } |
| 129 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 130 | if (dvi->hpd_irq >= 0) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 131 | dvi->connector.polled = DRM_CONNECTOR_POLL_HPD; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 132 | else |
| 133 | dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 134 | |
| 135 | drm_connector_helper_add(&dvi->connector, |
| 136 | &tfp410_con_helper_funcs); |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 137 | ret = drm_connector_init_with_ddc(bridge->dev, &dvi->connector, |
| 138 | &tfp410_con_funcs, |
| 139 | dvi->connector_type, |
| 140 | dvi->ddc); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 141 | if (ret) { |
| 142 | dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret); |
| 143 | return ret; |
| 144 | } |
| 145 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 146 | drm_display_info_set_bus_formats(&dvi->connector.display_info, |
| 147 | &dvi->bus_format, 1); |
| 148 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 149 | drm_connector_attach_encoder(&dvi->connector, |
| 150 | bridge->encoder); |
| 151 | |
| 152 | return 0; |
| 153 | } |
| 154 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 155 | static void tfp410_enable(struct drm_bridge *bridge) |
| 156 | { |
| 157 | struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| 158 | |
| 159 | gpiod_set_value_cansleep(dvi->powerdown, 0); |
| 160 | } |
| 161 | |
| 162 | static void tfp410_disable(struct drm_bridge *bridge) |
| 163 | { |
| 164 | struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| 165 | |
| 166 | gpiod_set_value_cansleep(dvi->powerdown, 1); |
| 167 | } |
| 168 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 169 | static const struct drm_bridge_funcs tfp410_bridge_funcs = { |
| 170 | .attach = tfp410_attach, |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 171 | .enable = tfp410_enable, |
| 172 | .disable = tfp410_disable, |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 173 | }; |
| 174 | |
| 175 | static void tfp410_hpd_work_func(struct work_struct *work) |
| 176 | { |
| 177 | struct tfp410 *dvi; |
| 178 | |
| 179 | dvi = container_of(work, struct tfp410, hpd_work.work); |
| 180 | |
| 181 | if (dvi->bridge.dev) |
| 182 | drm_helper_hpd_irq_event(dvi->bridge.dev); |
| 183 | } |
| 184 | |
| 185 | static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg) |
| 186 | { |
| 187 | struct tfp410 *dvi = arg; |
| 188 | |
| 189 | mod_delayed_work(system_wq, &dvi->hpd_work, |
| 190 | msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); |
| 191 | |
| 192 | return IRQ_HANDLED; |
| 193 | } |
| 194 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 195 | static const struct drm_bridge_timings tfp410_default_timings = { |
| 196 | .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
| 197 | | DRM_BUS_FLAG_DE_HIGH, |
| 198 | .setup_time_ps = 1200, |
| 199 | .hold_time_ps = 1300, |
| 200 | }; |
| 201 | |
| 202 | static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) |
| 203 | { |
| 204 | struct drm_bridge_timings *timings = &dvi->timings; |
| 205 | struct device_node *ep; |
| 206 | u32 pclk_sample = 0; |
| 207 | u32 bus_width = 24; |
| 208 | s32 deskew = 0; |
| 209 | |
| 210 | /* Start with defaults. */ |
| 211 | *timings = tfp410_default_timings; |
| 212 | |
| 213 | if (i2c) |
| 214 | /* |
| 215 | * In I2C mode timings are configured through the I2C interface. |
| 216 | * As the driver doesn't support I2C configuration yet, we just |
| 217 | * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1). |
| 218 | */ |
| 219 | return 0; |
| 220 | |
| 221 | /* |
| 222 | * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN |
| 223 | * and EDGE pins. They are specified in DT through endpoint properties |
| 224 | * and vendor-specific properties. |
| 225 | */ |
| 226 | ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0); |
| 227 | if (!ep) |
| 228 | return -EINVAL; |
| 229 | |
| 230 | /* Get the sampling edge from the endpoint. */ |
| 231 | of_property_read_u32(ep, "pclk-sample", &pclk_sample); |
| 232 | of_property_read_u32(ep, "bus-width", &bus_width); |
| 233 | of_node_put(ep); |
| 234 | |
| 235 | timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH; |
| 236 | |
| 237 | switch (pclk_sample) { |
| 238 | case 0: |
| 239 | timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
| 240 | | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE; |
| 241 | break; |
| 242 | case 1: |
| 243 | timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
| 244 | | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE; |
| 245 | break; |
| 246 | default: |
| 247 | return -EINVAL; |
| 248 | } |
| 249 | |
| 250 | switch (bus_width) { |
| 251 | case 12: |
| 252 | dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE; |
| 253 | break; |
| 254 | case 24: |
| 255 | dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24; |
| 256 | break; |
| 257 | default: |
| 258 | return -EINVAL; |
| 259 | } |
| 260 | |
| 261 | /* Get the setup and hold time from vendor-specific properties. */ |
| 262 | of_property_read_u32(dvi->dev->of_node, "ti,deskew", (u32 *)&deskew); |
| 263 | if (deskew < -4 || deskew > 3) |
| 264 | return -EINVAL; |
| 265 | |
| 266 | timings->setup_time_ps = min(0, 1200 - 350 * deskew); |
| 267 | timings->hold_time_ps = min(0, 1300 + 350 * deskew); |
| 268 | |
| 269 | return 0; |
| 270 | } |
| 271 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 272 | static int tfp410_get_connector_properties(struct tfp410 *dvi) |
| 273 | { |
| 274 | struct device_node *connector_node, *ddc_phandle; |
| 275 | int ret = 0; |
| 276 | |
| 277 | /* port@1 is the connector node */ |
| 278 | connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1); |
| 279 | if (!connector_node) |
| 280 | return -ENODEV; |
| 281 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 282 | if (of_device_is_compatible(connector_node, "hdmi-connector")) |
| 283 | dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA; |
| 284 | else |
| 285 | dvi->connector_type = DRM_MODE_CONNECTOR_DVID; |
| 286 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 287 | dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode, |
| 288 | "hpd-gpios", 0, GPIOD_IN, "hpd"); |
| 289 | if (IS_ERR(dvi->hpd)) { |
| 290 | ret = PTR_ERR(dvi->hpd); |
| 291 | dvi->hpd = NULL; |
| 292 | if (ret == -ENOENT) |
| 293 | ret = 0; |
| 294 | else |
| 295 | goto fail; |
| 296 | } |
| 297 | |
| 298 | ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0); |
| 299 | if (!ddc_phandle) |
| 300 | goto fail; |
| 301 | |
| 302 | dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle); |
| 303 | if (dvi->ddc) |
| 304 | dev_info(dvi->dev, "Connector's ddc i2c bus found\n"); |
| 305 | else |
| 306 | ret = -EPROBE_DEFER; |
| 307 | |
| 308 | of_node_put(ddc_phandle); |
| 309 | |
| 310 | fail: |
| 311 | of_node_put(connector_node); |
| 312 | return ret; |
| 313 | } |
| 314 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 315 | static int tfp410_init(struct device *dev, bool i2c) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 316 | { |
| 317 | struct tfp410 *dvi; |
| 318 | int ret; |
| 319 | |
| 320 | if (!dev->of_node) { |
| 321 | dev_err(dev, "device-tree data is missing\n"); |
| 322 | return -ENXIO; |
| 323 | } |
| 324 | |
| 325 | dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL); |
| 326 | if (!dvi) |
| 327 | return -ENOMEM; |
| 328 | dev_set_drvdata(dev, dvi); |
| 329 | |
| 330 | dvi->bridge.funcs = &tfp410_bridge_funcs; |
| 331 | dvi->bridge.of_node = dev->of_node; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 332 | dvi->bridge.timings = &dvi->timings; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 333 | dvi->dev = dev; |
| 334 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 335 | ret = tfp410_parse_timings(dvi, i2c); |
| 336 | if (ret) |
| 337 | goto fail; |
| 338 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 339 | ret = tfp410_get_connector_properties(dvi); |
| 340 | if (ret) |
| 341 | goto fail; |
| 342 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 343 | dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown", |
| 344 | GPIOD_OUT_HIGH); |
| 345 | if (IS_ERR(dvi->powerdown)) { |
| 346 | dev_err(dev, "failed to parse powerdown gpio\n"); |
| 347 | return PTR_ERR(dvi->powerdown); |
| 348 | } |
| 349 | |
| 350 | if (dvi->hpd) |
| 351 | dvi->hpd_irq = gpiod_to_irq(dvi->hpd); |
| 352 | else |
| 353 | dvi->hpd_irq = -ENXIO; |
| 354 | |
| 355 | if (dvi->hpd_irq >= 0) { |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 356 | INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func); |
| 357 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 358 | ret = devm_request_threaded_irq(dev, dvi->hpd_irq, |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 359 | NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING | |
| 360 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 361 | "hdmi-hpd", dvi); |
| 362 | if (ret) { |
| 363 | DRM_ERROR("failed to register hpd interrupt\n"); |
| 364 | goto fail; |
| 365 | } |
| 366 | } |
| 367 | |
| 368 | drm_bridge_add(&dvi->bridge); |
| 369 | |
| 370 | return 0; |
| 371 | fail: |
| 372 | i2c_put_adapter(dvi->ddc); |
| 373 | if (dvi->hpd) |
| 374 | gpiod_put(dvi->hpd); |
| 375 | return ret; |
| 376 | } |
| 377 | |
| 378 | static int tfp410_fini(struct device *dev) |
| 379 | { |
| 380 | struct tfp410 *dvi = dev_get_drvdata(dev); |
| 381 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 382 | if (dvi->hpd_irq >= 0) |
| 383 | cancel_delayed_work_sync(&dvi->hpd_work); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 384 | |
| 385 | drm_bridge_remove(&dvi->bridge); |
| 386 | |
| 387 | if (dvi->ddc) |
| 388 | i2c_put_adapter(dvi->ddc); |
| 389 | if (dvi->hpd) |
| 390 | gpiod_put(dvi->hpd); |
| 391 | |
| 392 | return 0; |
| 393 | } |
| 394 | |
| 395 | static int tfp410_probe(struct platform_device *pdev) |
| 396 | { |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 397 | return tfp410_init(&pdev->dev, false); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 398 | } |
| 399 | |
| 400 | static int tfp410_remove(struct platform_device *pdev) |
| 401 | { |
| 402 | return tfp410_fini(&pdev->dev); |
| 403 | } |
| 404 | |
| 405 | static const struct of_device_id tfp410_match[] = { |
| 406 | { .compatible = "ti,tfp410" }, |
| 407 | {}, |
| 408 | }; |
| 409 | MODULE_DEVICE_TABLE(of, tfp410_match); |
| 410 | |
| 411 | static struct platform_driver tfp410_platform_driver = { |
| 412 | .probe = tfp410_probe, |
| 413 | .remove = tfp410_remove, |
| 414 | .driver = { |
| 415 | .name = "tfp410-bridge", |
| 416 | .of_match_table = tfp410_match, |
| 417 | }, |
| 418 | }; |
| 419 | |
| 420 | #if IS_ENABLED(CONFIG_I2C) |
| 421 | /* There is currently no i2c functionality. */ |
| 422 | static int tfp410_i2c_probe(struct i2c_client *client, |
| 423 | const struct i2c_device_id *id) |
| 424 | { |
| 425 | int reg; |
| 426 | |
| 427 | if (!client->dev.of_node || |
| 428 | of_property_read_u32(client->dev.of_node, "reg", ®)) { |
| 429 | dev_err(&client->dev, |
| 430 | "Can't get i2c reg property from device-tree\n"); |
| 431 | return -ENXIO; |
| 432 | } |
| 433 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 434 | return tfp410_init(&client->dev, true); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 435 | } |
| 436 | |
| 437 | static int tfp410_i2c_remove(struct i2c_client *client) |
| 438 | { |
| 439 | return tfp410_fini(&client->dev); |
| 440 | } |
| 441 | |
| 442 | static const struct i2c_device_id tfp410_i2c_ids[] = { |
| 443 | { "tfp410", 0 }, |
| 444 | { } |
| 445 | }; |
| 446 | MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids); |
| 447 | |
| 448 | static struct i2c_driver tfp410_i2c_driver = { |
| 449 | .driver = { |
| 450 | .name = "tfp410", |
| 451 | .of_match_table = of_match_ptr(tfp410_match), |
| 452 | }, |
| 453 | .id_table = tfp410_i2c_ids, |
| 454 | .probe = tfp410_i2c_probe, |
| 455 | .remove = tfp410_i2c_remove, |
| 456 | }; |
| 457 | #endif /* IS_ENABLED(CONFIG_I2C) */ |
| 458 | |
| 459 | static struct { |
| 460 | uint i2c:1; |
| 461 | uint platform:1; |
| 462 | } tfp410_registered_driver; |
| 463 | |
| 464 | static int __init tfp410_module_init(void) |
| 465 | { |
| 466 | int ret; |
| 467 | |
| 468 | #if IS_ENABLED(CONFIG_I2C) |
| 469 | ret = i2c_add_driver(&tfp410_i2c_driver); |
| 470 | if (ret) |
| 471 | pr_err("%s: registering i2c driver failed: %d", |
| 472 | __func__, ret); |
| 473 | else |
| 474 | tfp410_registered_driver.i2c = 1; |
| 475 | #endif |
| 476 | |
| 477 | ret = platform_driver_register(&tfp410_platform_driver); |
| 478 | if (ret) |
| 479 | pr_err("%s: registering platform driver failed: %d", |
| 480 | __func__, ret); |
| 481 | else |
| 482 | tfp410_registered_driver.platform = 1; |
| 483 | |
| 484 | if (tfp410_registered_driver.i2c || |
| 485 | tfp410_registered_driver.platform) |
| 486 | return 0; |
| 487 | |
| 488 | return ret; |
| 489 | } |
| 490 | module_init(tfp410_module_init); |
| 491 | |
| 492 | static void __exit tfp410_module_exit(void) |
| 493 | { |
| 494 | #if IS_ENABLED(CONFIG_I2C) |
| 495 | if (tfp410_registered_driver.i2c) |
| 496 | i2c_del_driver(&tfp410_i2c_driver); |
| 497 | #endif |
| 498 | if (tfp410_registered_driver.platform) |
| 499 | platform_driver_unregister(&tfp410_platform_driver); |
| 500 | } |
| 501 | module_exit(tfp410_module_exit); |
| 502 | |
| 503 | MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>"); |
| 504 | MODULE_DESCRIPTION("TI TFP410 DVI bridge driver"); |
| 505 | MODULE_LICENSE("GPL"); |