v4.19.13 snapshot.
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
new file mode 100644
index 0000000..1e45268
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -0,0 +1,1286 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2.h
+ * Title: MPI Message independent structures and definitions
+ * including System Interface Register Set and
+ * scatter/gather formats.
+ * Creation Date: June 21, 2006
+ *
+ * mpi2.h Version: 02.00.50
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved ReplyPostHostIndex register to offset 0x6C of the
+ * MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ * MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ * Added union of request descriptors.
+ * Added union of reply descriptors.
+ * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added define for MPI2_VERSION_02_00.
+ * Fixed the size of the FunctionDependent5 field in the
+ * MPI2_DEFAULT_REPLY structure.
+ * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Removed the MPI-defined Fault Codes and extended the
+ * product specific codes up to 0xEFFF.
+ * Added a sixth key value for the WriteSequence register
+ * and changed the flush value to 0x0.
+ * Added message function codes for Diagnostic Buffer Post
+ * and Diagnsotic Release.
+ * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ * Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added #defines for marking a reply descriptor as unused.
+ * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved LUN field defines from mpi2_init.h.
+ * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
+ * In all request and reply descriptors, replaced VF_ID
+ * field with MSIxIndex field.
+ * Removed DevHandle field from
+ * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ * bytes reserved.
+ * Added RAID Accelerator functionality.
+ * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MSI-x index mask and shift for Reply Post Host
+ * Index register.
+ * Added function code for Host Based Discovery Action.
+ * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
+ * Added defines for product-specific range of message
+ * function codes, 0xF0 to 0xFF.
+ * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added alternative defines for the SGE Direction bit.
+ * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Incorporating additions for MPI v2.5.
+ * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added Hard Reset delay timings.
+ * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
+ * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT
+ * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-14 02.00.36 Updated copyright information.
+ * Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-16-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added Scratchpad registers to
+ * MPI2_SYSTEM_INTERFACE_REGS.
+ * Added MPI2_DIAG_SBR_RELOAD.
+ * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT
+ * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT
+ * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines
+ * to be unique within first 32 characters.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_H
+#define MPI2_H
+
+/*****************************************************************************
+*
+* MPI Version Definitions
+*
+*****************************************************************************/
+
+#define MPI2_VERSION_MAJOR_MASK (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT (8)
+#define MPI2_VERSION_MINOR_MASK (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT (0)
+
+/*major version for all MPI v2.x */
+#define MPI2_VERSION_MAJOR (0x02)
+
+/*minor version for MPI v2.0 compatible products */
+#define MPI2_VERSION_MINOR (0x00)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI2_VERSION_MINOR)
+#define MPI2_VERSION_02_00 (0x0200)
+
+/*minor version for MPI v2.5 compatible products */
+#define MPI25_VERSION_MINOR (0x05)
+#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI25_VERSION_MINOR)
+#define MPI2_VERSION_02_05 (0x0205)
+
+/*minor version for MPI v2.6 compatible products */
+#define MPI26_VERSION_MINOR (0x06)
+#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI26_VERSION_MINOR)
+#define MPI2_VERSION_02_06 (0x0206)
+
+
+/* Unit and Dev versioning for this MPI header set */
+#define MPI2_HEADER_VERSION_UNIT (0x32)
+#define MPI2_HEADER_VERSION_DEV (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
+#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
+ MPI2_HEADER_VERSION_DEV)
+
+/*****************************************************************************
+*
+* IOC State Definitions
+*
+*****************************************************************************/
+
+#define MPI2_IOC_STATE_RESET (0x00000000)
+#define MPI2_IOC_STATE_READY (0x10000000)
+#define MPI2_IOC_STATE_OPERATIONAL (0x20000000)
+#define MPI2_IOC_STATE_FAULT (0x40000000)
+
+#define MPI2_IOC_STATE_MASK (0xF0000000)
+#define MPI2_IOC_STATE_SHIFT (28)
+
+/*Fault state range for prodcut specific codes */
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000)
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF)
+
+/*****************************************************************************
+*
+* System Interface Register Definitions
+*
+*****************************************************************************/
+
+typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
+ U32 Doorbell; /*0x00 */
+ U32 WriteSequence; /*0x04 */
+ U32 HostDiagnostic; /*0x08 */
+ U32 Reserved1; /*0x0C */
+ U32 DiagRWData; /*0x10 */
+ U32 DiagRWAddressLow; /*0x14 */
+ U32 DiagRWAddressHigh; /*0x18 */
+ U32 Reserved2[5]; /*0x1C */
+ U32 HostInterruptStatus; /*0x30 */
+ U32 HostInterruptMask; /*0x34 */
+ U32 DCRData; /*0x38 */
+ U32 DCRAddress; /*0x3C */
+ U32 Reserved3[2]; /*0x40 */
+ U32 ReplyFreeHostIndex; /*0x48 */
+ U32 Reserved4[8]; /*0x4C */
+ U32 ReplyPostHostIndex; /*0x6C */
+ U32 Reserved5; /*0x70 */
+ U32 HCBSize; /*0x74 */
+ U32 HCBAddressLow; /*0x78 */
+ U32 HCBAddressHigh; /*0x7C */
+ U32 Reserved6[12]; /*0x80 */
+ U32 Scratchpad[4]; /*0xB0 */
+ U32 RequestDescriptorPostLow; /*0xC0 */
+ U32 RequestDescriptorPostHigh; /*0xC4 */
+ U32 AtomicRequestDescriptorPost;/*0xC8 */
+ U32 Reserved7[13]; /*0xCC */
+} MPI2_SYSTEM_INTERFACE_REGS,
+ *PTR_MPI2_SYSTEM_INTERFACE_REGS,
+ Mpi2SystemInterfaceRegs_t,
+ *pMpi2SystemInterfaceRegs_t;
+
+/*
+ *Defines for working with the Doorbell register.
+ */
+#define MPI2_DOORBELL_OFFSET (0x00000000)
+
+/*IOC --> System values */
+#define MPI2_DOORBELL_USED (0x08000000)
+#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000)
+#define MPI2_DOORBELL_WHO_INIT_SHIFT (24)
+#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF)
+#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF)
+
+/*System --> IOC values */
+#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000)
+#define MPI2_DOORBELL_FUNCTION_SHIFT (24)
+#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
+#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16)
+
+/*
+ *Defines for the WriteSequence register
+ */
+#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
+#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
+#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
+
+/*
+ *Defines for the HostDiagnostic register
+ */
+#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
+
+#define MPI2_DIAG_SBR_RELOAD (0x00002000)
+
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
+
+/* Defines for V7A/V7R HostDiagnostic Register */
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800)
+
+#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
+#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
+#define MPI2_DIAG_HCB_MODE (0x00000100)
+#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080)
+#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040)
+#define MPI2_DIAG_RESET_HISTORY (0x00000020)
+#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010)
+#define MPI2_DIAG_RESET_ADAPTER (0x00000004)
+#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002)
+
+/*
+ *Offsets for DiagRWData and address
+ */
+#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010)
+#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014)
+#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018)
+
+/*
+ *Defines for the HostInterruptStatus register
+ */
+#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
+#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000)
+#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
+#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000)
+#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008)
+#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001)
+#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
+
+/*
+ *Defines for the HostInterruptMask register
+ */
+#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
+#define MPI2_HIM_RESET_IRQ_MASK (0x40000000)
+#define MPI2_HIM_REPLY_INT_MASK (0x00000008)
+#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK
+#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001)
+#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK
+
+/*
+ *Offsets for DCRData and address
+ */
+#define MPI2_DCR_DATA_OFFSET (0x00000038)
+#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C)
+
+/*
+ *Offset for the Reply Free Queue
+ */
+#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
+
+/*
+ *Defines for the Reply Descriptor Post Queue
+ */
+#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
+#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
+#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
+#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
+#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/
+
+
+/*
+ *Defines for the HCBSize and address
+ */
+#define MPI2_HCB_SIZE_OFFSET (0x00000074)
+#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000)
+#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001)
+
+#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078)
+#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
+
+/*
+ *Offsets for the Scratchpad registers
+ */
+#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0)
+#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4)
+#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8)
+#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC)
+
+/*
+ *Offsets for the Request Descriptor Post Queue
+ */
+#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
+#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
+#define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8)
+
+/*Hard Reset delay timings */
+#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000)
+#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000)
+#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000)
+
+/*****************************************************************************
+*
+* Message Descriptors
+*
+*****************************************************************************/
+
+/*Request Descriptors */
+
+/*Default Request Descriptor */
+typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 LMID; /*0x04 */
+ U16 DescriptorTypeDependent; /*0x06 */
+} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+ *PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+ Mpi2DefaultRequestDescriptor_t,
+ *pMpi2DefaultRequestDescriptor_t;
+
+/*defines for the RequestFlags field */
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E)
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
+#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C)
+#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10)
+
+#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
+
+/*High Priority Request Descriptor */
+typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 LMID; /*0x04 */
+ U16 Reserved1; /*0x06 */
+} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+ *PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+ Mpi2HighPriorityRequestDescriptor_t,
+ *pMpi2HighPriorityRequestDescriptor_t;
+
+/*SCSI IO Request Descriptor */
+typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 LMID; /*0x04 */
+ U16 DevHandle; /*0x06 */
+} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+ *PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+ Mpi2SCSIIORequestDescriptor_t,
+ *pMpi2SCSIIORequestDescriptor_t;
+
+/*SCSI Target Request Descriptor */
+typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 LMID; /*0x04 */
+ U16 IoIndex; /*0x06 */
+} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+ *PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+ Mpi2SCSITargetRequestDescriptor_t,
+ *pMpi2SCSITargetRequestDescriptor_t;
+
+/*RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 LMID; /*0x04 */
+ U16 Reserved; /*0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ *PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ Mpi2RAIDAcceleratorRequestDescriptor_t,
+ *pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+/*Fast Path SCSI IO Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+ MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+ *PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+ Mpi25FastPathSCSIIORequestDescriptor_t,
+ *pMpi25FastPathSCSIIORequestDescriptor_t;
+
+/*PCIe Encapsulated Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedRequestDescriptor_t,
+ *pMpi26PCIeEncapsulatedRequestDescriptor_t;
+
+/*union of Request Descriptors */
+typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
+ MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+ MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+ MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+ MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+ MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+ MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
+ U64 Words;
+} MPI2_REQUEST_DESCRIPTOR_UNION,
+ *PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
+ Mpi2RequestDescriptorUnion_t,
+ *pMpi2RequestDescriptorUnion_t;
+
+/*Atomic Request Descriptors */
+
+/*
+ * All Atomic Request Descriptors have the same format, so the following
+ * structure is used for all Atomic Request Descriptors:
+ * Atomic Default Request Descriptor
+ * Atomic High Priority Request Descriptor
+ * Atomic SCSI IO Request Descriptor
+ * Atomic SCSI Target Request Descriptor
+ * Atomic RAID Accelerator Request Descriptor
+ * Atomic Fast Path SCSI IO Request Descriptor
+ * Atomic PCIe Encapsulated Request Descriptor
+ */
+
+/*Atomic Request Descriptor */
+typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+} MPI26_ATOMIC_REQUEST_DESCRIPTOR,
+ *PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR,
+ Mpi26AtomicRequestDescriptor_t,
+ *pMpi26AtomicRequestDescriptor_t;
+
+/*for the RequestFlags field, use the same
+ *defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR
+ */
+
+/*Reply Descriptors */
+
+/*Default Reply Descriptor */
+typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 DescriptorTypeDependent1; /*0x02 */
+ U32 DescriptorTypeDependent2; /*0x04 */
+} MPI2_DEFAULT_REPLY_DESCRIPTOR,
+ *PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
+ Mpi2DefaultReplyDescriptor_t,
+ *pMpi2DefaultReplyDescriptor_t;
+
+/*defines for the ReplyFlags field */
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
+#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06)
+#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
+
+/*values for marking a reply descriptor as unused */
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
+
+/*Address Reply Descriptor */
+typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U32 ReplyFrameAddress; /*0x04 */
+} MPI2_ADDRESS_REPLY_DESCRIPTOR,
+ *PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
+ Mpi2AddressReplyDescriptor_t,
+ *pMpi2AddressReplyDescriptor_t;
+
+#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00)
+
+/*SCSI IO Success Reply Descriptor */
+typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U16 TaskTag; /*0x04 */
+ U16 Reserved1; /*0x06 */
+} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2SCSIIOSuccessReplyDescriptor_t,
+ *pMpi2SCSIIOSuccessReplyDescriptor_t;
+
+/*TargetAssist Success Reply Descriptor */
+typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U8 SequenceNumber; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 IoIndex; /*0x06 */
+} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2TargetAssistSuccessReplyDescriptor_t,
+ *pMpi2TargetAssistSuccessReplyDescriptor_t;
+
+/*Target Command Buffer Reply Descriptor */
+typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U8 VP_ID; /*0x02 */
+ U8 Flags; /*0x03 */
+ U16 InitiatorDevHandle; /*0x04 */
+ U16 IoIndex; /*0x06 */
+} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+ *PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+ Mpi2TargetCommandBufferReplyDescriptor_t,
+ *pMpi2TargetCommandBufferReplyDescriptor_t;
+
+/*defines for Flags field */
+#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
+
+/*RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /*0x00 */
+ U8 MSIxIndex; /*0x01 */
+ U16 SMID; /*0x02 */
+ U32 Reserved; /*0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+ *pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+/*Fast Path SCSI IO Success Reply Descriptor */
+typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
+ MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
+ *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+
+/*PCIe Encapsulated Success Reply Descriptor */
+typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
+ *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
+
+/*union of Reply Descriptors */
+typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
+ MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+ MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+ MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+ MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+ MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+ MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
+ MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
+ PCIeEncapsulatedSuccess;
+ U64 Words;
+} MPI2_REPLY_DESCRIPTORS_UNION,
+ *PTR_MPI2_REPLY_DESCRIPTORS_UNION,
+ Mpi2ReplyDescriptorsUnion_t,
+ *pMpi2ReplyDescriptorsUnion_t;
+
+/*****************************************************************************
+*
+* Message Functions
+*
+*****************************************************************************/
+
+#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00)
+#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01)
+#define MPI2_FUNCTION_IOC_INIT (0x02)
+#define MPI2_FUNCTION_IOC_FACTS (0x03)
+#define MPI2_FUNCTION_CONFIG (0x04)
+#define MPI2_FUNCTION_PORT_FACTS (0x05)
+#define MPI2_FUNCTION_PORT_ENABLE (0x06)
+#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07)
+#define MPI2_FUNCTION_EVENT_ACK (0x08)
+#define MPI2_FUNCTION_FW_DOWNLOAD (0x09)
+#define MPI2_FUNCTION_TARGET_ASSIST (0x0B)
+#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C)
+#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D)
+#define MPI2_FUNCTION_FW_UPLOAD (0x12)
+#define MPI2_FUNCTION_RAID_ACTION (0x15)
+#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16)
+#define MPI2_FUNCTION_TOOLBOX (0x17)
+#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18)
+#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A)
+#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
+#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B)
+#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C)
+#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D)
+#define MPI2_FUNCTION_DIAG_RELEASE (0x1E)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25)
+#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C)
+#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
+#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
+#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33)
+#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
+#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
+
+/*Doorbell functions */
+#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
+#define MPI2_FUNCTION_HANDSHAKE (0x42)
+
+/*****************************************************************************
+*
+* IOC Status Values
+*
+*****************************************************************************/
+
+/*mask for IOCStatus status value */
+#define MPI2_IOCSTATUS_MASK (0x7FFF)
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SUCCESS (0x0000)
+#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI2_IOCSTATUS_BUSY (0x0002)
+#define MPI2_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI2_IOCSTATUS_INVALID_VPID (0x0005)
+#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
+#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A)
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
+#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
+#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
+#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
+#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
+#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
+#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063)
+#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
+#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
+#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
+#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
+#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
+#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
+#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
+
+/****************************************************************************
+* RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
+
+/****************************************************************************
+* IOCStatus flag to indicate that log info is available
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
+
+/****************************************************************************
+* IOCLogInfo Types
+****************************************************************************/
+
+#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000)
+#define MPI2_IOCLOGINFO_TYPE_SHIFT (28)
+#define MPI2_IOCLOGINFO_TYPE_NONE (0x0)
+#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1)
+#define MPI2_IOCLOGINFO_TYPE_FC (0x2)
+#define MPI2_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4)
+#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
+
+/*****************************************************************************
+*
+* Standard Message Structures
+*
+*****************************************************************************/
+
+/****************************************************************************
+*Request Message Header for all request messages
+****************************************************************************/
+
+typedef struct _MPI2_REQUEST_HEADER {
+ U16 FunctionDependent1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 FunctionDependent2; /*0x04 */
+ U8 FunctionDependent3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER,
+ MPI2RequestHeader_t, *pMPI2RequestHeader_t;
+
+/****************************************************************************
+* Default Reply
+****************************************************************************/
+
+typedef struct _MPI2_DEFAULT_REPLY {
+ U16 FunctionDependent1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 FunctionDependent2; /*0x04 */
+ U8 FunctionDependent3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U16 FunctionDependent5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY,
+ MPI2DefaultReply_t, *pMPI2DefaultReply_t;
+
+/*common version structure/union used in messages and configuration pages */
+
+typedef struct _MPI2_VERSION_STRUCT {
+ U8 Dev; /*0x00 */
+ U8 Unit; /*0x01 */
+ U8 Minor; /*0x02 */
+ U8 Major; /*0x03 */
+} MPI2_VERSION_STRUCT;
+
+typedef union _MPI2_VERSION_UNION {
+ MPI2_VERSION_STRUCT Struct;
+ U32 Word;
+} MPI2_VERSION_UNION;
+
+/*LUN field defines, common to many structures */
+#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI2_LUN_LEVEL_1_WORD (0xFF00)
+#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00)
+
+/*****************************************************************************
+*
+* Fusion-MPT MPI Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* MPI Simple Element structures
+****************************************************************************/
+
+typedef struct _MPI2_SGE_SIMPLE32 {
+ U32 FlagsLength;
+ U32 Address;
+} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32,
+ Mpi2SGESimple32_t, *pMpi2SGESimple32_t;
+
+typedef struct _MPI2_SGE_SIMPLE64 {
+ U32 FlagsLength;
+ U64 Address;
+} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64,
+ Mpi2SGESimple64_t, *pMpi2SGESimple64_t;
+
+typedef struct _MPI2_SGE_SIMPLE_UNION {
+ U32 FlagsLength;
+ union {
+ U32 Address32;
+ U64 Address64;
+ } u;
+} MPI2_SGE_SIMPLE_UNION,
+ *PTR_MPI2_SGE_SIMPLE_UNION,
+ Mpi2SGESimpleUnion_t,
+ *pMpi2SGESimpleUnion_t;
+
+/****************************************************************************
+* MPI Chain Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_CHAIN32 {
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ U32 Address;
+} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32,
+ Mpi2SGEChain32_t, *pMpi2SGEChain32_t;
+
+typedef struct _MPI2_SGE_CHAIN64 {
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ U64 Address;
+} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64,
+ Mpi2SGEChain64_t, *pMpi2SGEChain64_t;
+
+typedef struct _MPI2_SGE_CHAIN_UNION {
+ U16 Length;
+ U8 NextChainOffset;
+ U8 Flags;
+ union {
+ U32 Address32;
+ U64 Address64;
+ } u;
+} MPI2_SGE_CHAIN_UNION,
+ *PTR_MPI2_SGE_CHAIN_UNION,
+ Mpi2SGEChainUnion_t,
+ *pMpi2SGEChainUnion_t;
+
+/****************************************************************************
+* MPI Transaction Context Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANSACTION32 {
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[1];
+ U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION32,
+ *PTR_MPI2_SGE_TRANSACTION32,
+ Mpi2SGETransaction32_t,
+ *pMpi2SGETransaction32_t;
+
+typedef struct _MPI2_SGE_TRANSACTION64 {
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[2];
+ U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION64,
+ *PTR_MPI2_SGE_TRANSACTION64,
+ Mpi2SGETransaction64_t,
+ *pMpi2SGETransaction64_t;
+
+typedef struct _MPI2_SGE_TRANSACTION96 {
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[3];
+ U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96,
+ Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t;
+
+typedef struct _MPI2_SGE_TRANSACTION128 {
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ U32 TransactionContext[4];
+ U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128,
+ Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128;
+
+typedef struct _MPI2_SGE_TRANSACTION_UNION {
+ U8 Reserved;
+ U8 ContextSize;
+ U8 DetailsLength;
+ U8 Flags;
+ union {
+ U32 TransactionContext32[1];
+ U32 TransactionContext64[2];
+ U32 TransactionContext96[3];
+ U32 TransactionContext128[4];
+ } u;
+ U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION_UNION,
+ *PTR_MPI2_SGE_TRANSACTION_UNION,
+ Mpi2SGETransactionUnion_t,
+ *pMpi2SGETransactionUnion_t;
+
+/****************************************************************************
+* MPI SGE union for IO SGL's - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_IO_UNION {
+ union {
+ MPI2_SGE_SIMPLE_UNION Simple;
+ MPI2_SGE_CHAIN_UNION Chain;
+ } u;
+} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION,
+ Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t;
+
+/****************************************************************************
+* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION {
+ union {
+ MPI2_SGE_SIMPLE_UNION Simple;
+ MPI2_SGE_TRANSACTION_UNION Transaction;
+ } u;
+} MPI2_SGE_TRANS_SIMPLE_UNION,
+ *PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
+ Mpi2SGETransSimpleUnion_t,
+ *pMpi2SGETransSimpleUnion_t;
+
+/****************************************************************************
+* All MPI SGE types union
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_UNION {
+ union {
+ MPI2_SGE_SIMPLE_UNION Simple;
+ MPI2_SGE_CHAIN_UNION Chain;
+ MPI2_SGE_TRANSACTION_UNION Transaction;
+ } u;
+} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION,
+ Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t;
+
+/****************************************************************************
+* MPI SGE field definition and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80)
+#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40)
+#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
+#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08)
+#define MPI2_SGE_FLAGS_DIRECTION (0x04)
+#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02)
+#define MPI2_SGE_FLAGS_END_OF_LIST (0x01)
+
+#define MPI2_SGE_FLAGS_SHIFT (24)
+
+#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF)
+#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
+
+/*Element Type */
+
+#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
+#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
+#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30)
+#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30)
+
+/*Address location */
+
+#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
+
+/*Direction */
+
+#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00)
+#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04)
+
+#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
+#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
+
+/*Address Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
+
+/*Context Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02)
+#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04)
+#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06)
+
+#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
+#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16)
+
+/****************************************************************************
+* MPI SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \
+ MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
+#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
+
+#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \
+ MPI2_SGE_LENGTH(l))
+
+#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+ MPI2_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+ MPI2_SGE_SET_FLAGS(f))
+#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+ MPI2_SGE_LENGTH(l))
+
+#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \
+ MPI2_SGE_CHAIN_OFFSET_SHIFT)
+
+/*****************************************************************************
+*
+* Fusion-MPT IEEE Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IEEE Simple Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_SIMPLE32 {
+ U32 Address;
+ U32 FlagsLength;
+} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32,
+ Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t;
+
+typedef struct _MPI2_IEEE_SGE_SIMPLE64 {
+ U64 Address;
+ U32 Length;
+ U16 Reserved1;
+ U8 Reserved2;
+ U8 Flags;
+} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64,
+ Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t;
+
+typedef union _MPI2_IEEE_SGE_SIMPLE_UNION {
+ MPI2_IEEE_SGE_SIMPLE32 Simple32;
+ MPI2_IEEE_SGE_SIMPLE64 Simple64;
+} MPI2_IEEE_SGE_SIMPLE_UNION,
+ *PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
+ Mpi2IeeeSgeSimpleUnion_t,
+ *pMpi2IeeeSgeSimpleUnion_t;
+
+/****************************************************************************
+* IEEE Chain Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
+
+/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
+
+typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
+ MPI2_IEEE_SGE_CHAIN32 Chain32;
+ MPI2_IEEE_SGE_CHAIN64 Chain64;
+} MPI2_IEEE_SGE_CHAIN_UNION,
+ *PTR_MPI2_IEEE_SGE_CHAIN_UNION,
+ Mpi2IeeeSgeChainUnion_t,
+ *pMpi2IeeeSgeChainUnion_t;
+
+/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */
+typedef struct _MPI25_IEEE_SGE_CHAIN64 {
+ U64 Address;
+ U32 Length;
+ U16 Reserved1;
+ U8 NextChainOffset;
+ U8 Flags;
+} MPI25_IEEE_SGE_CHAIN64,
+ *PTR_MPI25_IEEE_SGE_CHAIN64,
+ Mpi25IeeeSgeChain64_t,
+ *pMpi25IeeeSgeChain64_t;
+
+/****************************************************************************
+* All IEEE SGE types union
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_UNION {
+ union {
+ MPI2_IEEE_SGE_SIMPLE_UNION Simple;
+ MPI2_IEEE_SGE_CHAIN_UNION Chain;
+ } u;
+} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION,
+ Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t;
+
+/****************************************************************************
+* IEEE SGE union for IO SGL's
+****************************************************************************/
+
+typedef union _MPI25_SGE_IO_UNION {
+ MPI2_IEEE_SGE_SIMPLE64 IeeeSimple;
+ MPI25_IEEE_SGE_CHAIN64 IeeeChain;
+} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION,
+ Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t;
+
+/****************************************************************************
+* IEEE SGE field definitions and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80)
+#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40)
+
+#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24)
+
+#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF)
+
+/*Element Type */
+
+#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
+#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
+
+/*Next Segment Format */
+
+#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
+#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10)
+
+/*Data Location Address Space */
+
+#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
+#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
+ (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR)
+#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02)
+
+/****************************************************************************
+* IEEE SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \
+ >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
+
+#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\
+ MPI2_IEEE32_SGE_LENGTH(l))
+
+#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \
+ MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \
+ MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+ MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+ MPI2_IEEE32_SGE_SET_FLAGS(f))
+#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+ MPI2_IEEE32_SGE_LENGTH(l))
+
+/*****************************************************************************
+*
+* Fusion-MPT MPI/IEEE Scatter Gather Unions
+*
+*****************************************************************************/
+
+typedef union _MPI2_SIMPLE_SGE_UNION {
+ MPI2_SGE_SIMPLE_UNION MpiSimple;
+ MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION,
+ Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t;
+
+typedef union _MPI2_SGE_IO_UNION {
+ MPI2_SGE_SIMPLE_UNION MpiSimple;
+ MPI2_SGE_CHAIN_UNION MpiChain;
+ MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+ MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
+} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION,
+ Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t;
+
+/****************************************************************************
+*
+* Values for SGLFlags field, used in many request messages with an SGL
+*
+****************************************************************************/
+
+/*values for MPI SGL Data Location Address Space subfield */
+#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C)
+#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00)
+#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04)
+#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
+#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
+#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C)
+/*values for SGL Type subfield */
+#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03)
+#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
new file mode 100644
index 0000000..5122920
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -0,0 +1,4032 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_cnfg.h
+ * Title: MPI Configuration messages and pages
+ * Creation Date: November 10, 2006
+ *
+ * mpi2_cnfg.h Version: 02.00.42
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
+ * Added Manufacturing Page 11.
+ * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ * define.
+ * 06-26-07 02.00.02 Adding generic structure for product-specific
+ * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ * Rework of BIOS Page 2 configuration page.
+ * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ * forms.
+ * Added configuration pages IOC Page 8 and Driver
+ * Persistent Mapping Page 0.
+ * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
+ * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ * RAID Physical Disk Pages 0 and 1, RAID Configuration
+ * Page 0).
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 10-31-07 02.00.04 Added missing SEPDevHandle field to
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
+ * NVDATA.
+ * Modified IOC Page 7 to use masks and added field for
+ * SASBroadcastPrimitiveMasks.
+ * Added MPI2_CONFIG_PAGE_BIOS_4.
+ * Added MPI2_CONFIG_PAGE_LOG_0.
+ * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
+ * Added SAS Device IDs.
+ * Updated Integrated RAID configuration pages including
+ * Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ * Page 0.
+ * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ * Added missing MaxNumRoutedSasAddresses field to
+ * MPI2_CONFIG_PAGE_EXPANDER_0.
+ * Added SAS Port Page 0.
+ * Modified structure layout for
+ * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ * to 0x000000FF.
+ * Added two new values for the Physical Disk Coercion Size
+ * bits in the Flags field of Manufacturing Page 4.
+ * Added product-specific Manufacturing pages 16 to 31.
+ * Modified Flags bits for controlling write cache on SATA
+ * drives in IO Unit Page 1.
+ * Added new bit to AdditionalControlFlags of SAS IO Unit
+ * Page 1 to control Invalid Topology Correction.
+ * Added additional defines for RAID Volume Page 0
+ * VolumeStatusFlags field.
+ * Modified meaning of RAID Volume Page 0 VolumeSettings
+ * define for auto-configure of hot-swap drives.
+ * Added SupportedPhysDisks field to RAID Volume Page 1 and
+ * added related defines.
+ * Added PhysDiskAttributes field (and related defines) to
+ * RAID Physical Disk Page 0.
+ * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ * Added three new DiscoveryStatus bits for SAS IO Unit
+ * Page 0 and SAS Expander Page 0.
+ * Removed multiplexing information from SAS IO Unit pages.
+ * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ * Removed Zone Address Resolved bit from PhyInfo and from
+ * Expander Page 0 Flags field.
+ * Added two new AccessStatus values to SAS Device Page 0
+ * for indicating routing problems. Added 3 reserved words
+ * to this page.
+ * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
+ * Inserted missing reserved field into structure for IOC
+ * Page 6.
+ * Added more pending task bits to RAID Volume Page 0
+ * VolumeStatusFlags defines.
+ * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ * and SAS Expander Page 0 to flag a downstream initiator
+ * when in simplified routing mode.
+ * Removed SATA Init Failure defines for DiscoveryStatus
+ * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ * Added PortGroups, DmaGroup, and ControlGroup fields to
+ * SAS Device Page 0.
+ * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
+ * Unit Page 6.
+ * Added expander reduced functionality data to SAS
+ * Expander Page 0.
+ * Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09 02.00.12 Added IO Unit Page 7.
+ * Added new device ids.
+ * Added SAS IO Unit Page 5.
+ * Added partial and slumber power management capable flags
+ * to SAS Device Page 0 Flags field.
+ * Added PhyInfo defines for power condition.
+ * Added Ethernet configuration pages.
+ * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ * Added SAS PHY Page 4 structure and defines.
+ * 02-10-10 02.00.14 Modified the comments for the configuration page
+ * structures that contain an array of data. The host
+ * should use the "count" field in the page data (e.g. the
+ * NumPhys field) to determine the number of valid elements
+ * in the array.
+ * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added PowerManagementCapabilities to IO Unit Page 7.
+ * Added PortWidthModGroup field to
+ * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
+ * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
+ * define.
+ * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
+ * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
+ * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
+ * defines.
+ * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
+ * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
+ * the Pinout field.
+ * Added BoardTemperature and BoardTemperatureUnits fields
+ * to MPI2_CONFIG_PAGE_IO_UNIT_7.
+ * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
+ * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ * Added IO Unit Page 8, IO Unit Page 9,
+ * and IO Unit Page 10.
+ * Added SASNotifyPrimitiveMasks field to
+ * MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
+ * 05-25-11 02.00.20 Cleaned up a few comments.
+ * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
+ * for PCIe link as obsolete.
+ * Added SpinupFlags field containing a Disable Spin-up bit
+ * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
+ * Unit Page 4.
+ * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
+ * Added UEFIVersion field to BIOS Page 1 and defined new
+ * BiosOptions bits.
+ * Incorporating additions for MPI v2.5.
+ * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
+ * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
+ * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
+ * obsolete for MPI v2.5 and later.
+ * Added some defines for 12G SAS speeds.
+ * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
+ * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
+ * match the specification.
+ * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
+ * future use.
+ * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ * MPI2_CONFIG_PAGE_MAN_7.
+ * Added EnclosureLevel and ConnectorName fields to
+ * MPI2_CONFIG_PAGE_SAS_DEV_0.
+ * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ * MPI2_CONFIG_PAGE_SAS_DEV_0.
+ * Added EnclosureLevel field to
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
+ * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ * more defines for the BiosOptions field.
+ * 11-18-14 02.00.30 Updated copyright information.
+ * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
+ * Added AdapterOrderAux fields to BIOS Page 3.
+ * 03-16-15 02.00.31 Updated for MPI v2.6.
+ * Added Flags field to IO Unit Page 7.
+ * Added new SAS Phy Event codes
+ * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
+ * 08-25-15 02.00.34 Bumped Header Version.
+ * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
+ * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added Link field to PCIe Link Pages
+ * Added EnclosureLevel and ConnectorName to PCIe
+ * Device Page 0.
+ * Added define for PCIE IoUnit page 1 max rate shift.
+ * Added comment for reserved ExtPageTypes.
+ * Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Added NegotiatedLinkRate and NegotiatedPortWidth to
+ * PCIe device page 0.
+ * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
+ * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
+ * Changed declaration of ConnectorName in PCIe DevicePage0
+ * to match SAS DevicePage 0.
+ * Added SATADeviceWaitTime to IO Unit Page 11.
+ * Added MPI26_MFGPAGE_DEVID_SAS4008
+ * Added x16 PCIe width to IO Unit Page 7
+ * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
+ * phy data.
+ * Added InitStatus to PCIe IO Unit Page 1 header.
+ * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
+ * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
+ * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
+ * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
+ * Added ChassisSlot field to SAS Enclosure Page 0.
+ * Added ChassisSlot Valid bit (bit 5) to the Flags field
+ * in SAS Enclosure Page 0.
+ * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and
+ * MPI26_MFGPAGE_DEVID_SAS3916 defines.
+ * Removed MPI26_MFGPAGE_DEVID_SAS4008 define.
+ * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define.
+ * Renamed PI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to
+ * PI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN.
+ * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to
+ * MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK.
+ * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2.
+ * Added NOIOB field to PCIe Device Page 2.
+ * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
+ * the Capabilities field of PCIe Device Page 2.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_CNFG_H
+#define MPI2_CNFG_H
+
+/*****************************************************************************
+* Configuration Page Header and defines
+*****************************************************************************/
+
+/*Config Page Header */
+typedef struct _MPI2_CONFIG_PAGE_HEADER {
+ U8 PageVersion; /*0x00 */
+ U8 PageLength; /*0x01 */
+ U8 PageNumber; /*0x02 */
+ U8 PageType; /*0x03 */
+} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
+ Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
+
+typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
+ MPI2_CONFIG_PAGE_HEADER Struct;
+ U8 Bytes[4];
+ U16 Word16[2];
+ U32 Word32;
+} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
+ Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
+
+/*Extended Config Page Header */
+typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
+ U8 PageVersion; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 PageNumber; /*0x02 */
+ U8 PageType; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 Reserved2; /*0x07 */
+} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+ *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+ Mpi2ConfigExtendedPageHeader_t,
+ *pMpi2ConfigExtendedPageHeader_t;
+
+typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
+ MPI2_CONFIG_PAGE_HEADER Struct;
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
+ U8 Bytes[8];
+ U16 Word16[4];
+ U32 Word32[2];
+} MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+ *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+ Mpi2ConfigPageExtendedHeaderUnion,
+ *pMpi2ConfigPageExtendedHeaderUnion;
+
+
+/*PageType field values */
+#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
+#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
+#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
+#define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
+
+#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
+#define MPI2_CONFIG_PAGETYPE_IOC (0x01)
+#define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
+#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
+#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
+#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
+#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
+#define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
+
+#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
+
+
+/*ExtPageType field values */
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
+#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
+#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
+#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
+#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E)
+
+
+/*****************************************************************************
+* PageAddress defines
+*****************************************************************************/
+
+/*RAID Volume PageAddress format */
+#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
+
+
+/*RAID Physical Disk PageAddress format */
+#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
+#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
+#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
+
+#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
+#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
+
+
+/*SAS Expander PageAddress format */
+#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
+
+#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
+
+
+/*SAS Device PageAddress format */
+#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+
+#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
+
+
+/*SAS PHY PageAddress format */
+#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
+
+#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
+#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
+
+
+/*SAS Port PageAddress format */
+#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
+#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
+
+#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
+
+
+/*SAS Enclosure PageAddress format */
+#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
+
+/*Enclosure PageAddress format */
+#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
+
+/*RAID Configuration PageAddress format */
+#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
+#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
+#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
+
+#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
+
+
+/*Driver Persistent Mapping PageAddress format */
+#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
+
+#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
+#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
+#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
+
+
+/*Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+
+
+/*PCIe Switch PageAddress format */
+#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000)
+#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000)
+
+#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
+
+
+/*PCIe Device PageAddress format */
+#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
+
+/*PCIe Link PageAddress format */
+#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF)
+
+
+
+/****************************************************************************
+* Configuration messages
+****************************************************************************/
+
+/*Configuration Request Message */
+typedef struct _MPI2_CONFIG_REQUEST {
+ U8 Action; /*0x00 */
+ U8 SGLFlags; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U8 Reserved2; /*0x0C */
+ U8 ProxyVF_ID; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ U32 Reserved3; /*0x10 */
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
+ U32 PageAddress; /*0x18 */
+ MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */
+} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
+ Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
+
+/*values for the Action field */
+#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
+#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
+#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
+#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
+#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
+#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+
+/*Config Reply Message */
+typedef struct _MPI2_CONFIG_REPLY {
+ U8 Action; /*0x00 */
+ U8 SGLFlags; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 ExtPageLength; /*0x04 */
+ U8 ExtPageType; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U16 Reserved2; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
+} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
+ Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
+
+
+
+/*****************************************************************************
+*
+* C o n f i g u r a t i o n P a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Manufacturing Config pages
+****************************************************************************/
+
+#define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
+
+/*MPI v2.0 SAS products */
+#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
+#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
+#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
+#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
+#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
+#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
+#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
+
+#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
+
+#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
+#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
+#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
+#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
+#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
+#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
+#define MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP (0x02B0)
+
+/*MPI v2.5 SAS products */
+#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
+#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097)
+#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090)
+#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091)
+#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
+#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
+
+/* MPI v2.6 SAS Products */
+#define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9)
+#define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4)
+#define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5)
+#define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6)
+#define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7)
+#define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8)
+#define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0)
+#define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1)
+#define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2)
+#define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3)
+
+#define MPI26_MFGPAGE_DEVID_SAS3516 (0x00AA)
+#define MPI26_MFGPAGE_DEVID_SAS3516_1 (0x00AB)
+#define MPI26_MFGPAGE_DEVID_SAS3416 (0x00AC)
+#define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD)
+#define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE)
+#define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF)
+#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0)
+#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
+#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
+
+#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1)
+#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0)
+
+
+/*Manufacturing Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 ChipName[16]; /*0x04 */
+ U8 ChipRevision[8]; /*0x14 */
+ U8 BoardName[16]; /*0x1C */
+ U8 BoardAssembly[16]; /*0x2C */
+ U8 BoardTracerNumber[16]; /*0x3C */
+} MPI2_CONFIG_PAGE_MAN_0,
+ *PTR_MPI2_CONFIG_PAGE_MAN_0,
+ Mpi2ManufacturingPage0_t,
+ *pMpi2ManufacturingPage0_t;
+
+#define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 VPD[256]; /*0x04 */
+} MPI2_CONFIG_PAGE_MAN_1,
+ *PTR_MPI2_CONFIG_PAGE_MAN_1,
+ Mpi2ManufacturingPage1_t,
+ *pMpi2ManufacturingPage1_t;
+
+#define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
+
+
+typedef struct _MPI2_CHIP_REVISION_ID {
+ U16 DeviceID; /*0x00 */
+ U8 PCIRevisionID; /*0x02 */
+ U8 Reserved; /*0x03 */
+} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
+ Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
+
+
+/*Manufacturing Page 2 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
+#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
+ U32
+ HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_2,
+ *PTR_MPI2_CONFIG_PAGE_MAN_2,
+ Mpi2ManufacturingPage2_t,
+ *pMpi2ManufacturingPage2_t;
+
+#define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
+#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
+ U32
+ Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_3,
+ *PTR_MPI2_CONFIG_PAGE_MAN_3,
+ Mpi2ManufacturingPage3_t,
+ *pMpi2ManufacturingPage3_t;
+
+#define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 4 */
+
+typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
+ U8 PowerSaveFlags; /*0x00 */
+ U8 InternalOperationsSleepTime; /*0x01 */
+ U8 InternalOperationsRunTime; /*0x02 */
+ U8 HostIdleTime; /*0x03 */
+} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+ *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+ Mpi2ManPage4PwrSaveSettings_t,
+ *pMpi2ManPage4PwrSaveSettings_t;
+
+/*defines for the PowerSaveFlags field */
+#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
+#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
+#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
+#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Flags; /*0x08 */
+ U8 InquirySize; /*0x0C */
+ U8 Reserved2; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ U8 InquiryData[56]; /*0x10 */
+ U32 RAID0VolumeSettings; /*0x48 */
+ U32 RAID1EVolumeSettings; /*0x4C */
+ U32 RAID1VolumeSettings; /*0x50 */
+ U32 RAID10VolumeSettings; /*0x54 */
+ U32 Reserved4; /*0x58 */
+ U32 Reserved5; /*0x5C */
+ MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */
+ U8 MaxOCEDisks; /*0x64 */
+ U8 ResyncRate; /*0x65 */
+ U16 DataScrubDuration; /*0x66 */
+ U8 MaxHotSpares; /*0x68 */
+ U8 MaxPhysDisksPerVol; /*0x69 */
+ U8 MaxPhysDisks; /*0x6A */
+ U8 MaxVolumes; /*0x6B */
+} MPI2_CONFIG_PAGE_MAN_4,
+ *PTR_MPI2_CONFIG_PAGE_MAN_4,
+ Mpi2ManufacturingPage4_t,
+ *pMpi2ManufacturingPage4_t;
+
+#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
+
+/*Manufacturing Page 4 Flags field */
+#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
+#define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
+
+#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
+#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
+#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
+
+#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
+#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
+#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
+#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
+#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
+
+#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
+#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
+#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
+#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
+
+#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
+#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
+#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
+#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
+#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
+#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
+#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
+#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
+
+
+/*Manufacturing Page 5 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
+#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_MANUFACTURING5_ENTRY {
+ U64 WWID; /*0x00 */
+ U64 DeviceName; /*0x08 */
+} MPI2_MANUFACTURING5_ENTRY,
+ *PTR_MPI2_MANUFACTURING5_ENTRY,
+ Mpi2Manufacturing5Entry_t,
+ *pMpi2Manufacturing5Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ MPI2_MANUFACTURING5_ENTRY
+ Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_5,
+ *PTR_MPI2_CONFIG_PAGE_MAN_5,
+ Mpi2ManufacturingPage5_t,
+ *pMpi2ManufacturingPage5_t;
+
+#define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
+
+
+/*Manufacturing Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_6,
+ *PTR_MPI2_CONFIG_PAGE_MAN_6,
+ Mpi2ManufacturingPage6_t,
+ *pMpi2ManufacturingPage6_t;
+
+#define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
+
+
+/*Manufacturing Page 7 */
+
+typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
+ U32 Pinout; /*0x00 */
+ U8 Connector[16]; /*0x04 */
+ U8 Location; /*0x14 */
+ U8 ReceptacleID; /*0x15 */
+ U16 Slot; /*0x16 */
+ U32 Reserved2; /*0x18 */
+} MPI2_MANPAGE7_CONNECTOR_INFO,
+ *PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
+ Mpi2ManPage7ConnectorInfo_t,
+ *pMpi2ManPage7ConnectorInfo_t;
+
+/*defines for the Pinout field */
+#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
+#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
+
+#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
+#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
+#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
+#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
+#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
+#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
+#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
+#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
+#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13)
+
+/*defines for the Location field */
+#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
+#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
+#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
+#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
+#define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
+#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
+#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
+
+/*defines for the Slot field */
+#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Flags; /*0x0C */
+ U8 EnclosureName[16]; /*0x10 */
+ U8 NumPhys; /*0x20 */
+ U8 Reserved3; /*0x21 */
+ U16 Reserved4; /*0x22 */
+ MPI2_MANPAGE7_CONNECTOR_INFO
+ ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
+} MPI2_CONFIG_PAGE_MAN_7,
+ *PTR_MPI2_CONFIG_PAGE_MAN_7,
+ Mpi2ManufacturingPage7_t,
+ *pMpi2ManufacturingPage7_t;
+
+#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
+
+/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
+#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
+#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
+
+
+/*
+ *Generic structure to use for product-specific manufacturing pages
+ *(currently Manufacturing Page 8 through Manufacturing Page 31).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_PS,
+ *PTR_MPI2_CONFIG_PAGE_MAN_PS,
+ Mpi2ManufacturingPagePS_t,
+ *pMpi2ManufacturingPagePS_t;
+
+#define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
+#define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* IO Unit Config Pages
+****************************************************************************/
+
+/*IO Unit Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U64 UniqueValue; /*0x04 */
+ MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */
+ MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */
+} MPI2_CONFIG_PAGE_IO_UNIT_0,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
+ Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
+
+#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
+
+
+/*IO Unit Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Flags; /*0x04 */
+} MPI2_CONFIG_PAGE_IO_UNIT_1,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
+ Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
+
+#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
+
+/*IO Unit Page 1 Flags defines */
+#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
+#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
+#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
+#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
+#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
+#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
+#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
+#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
+#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
+#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
+#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
+#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
+#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
+
+
+/*IO Unit Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for GPIOCount at runtime.
+ */
+#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
+#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 GPIOCount; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U16
+ GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
+} MPI2_CONFIG_PAGE_IO_UNIT_3,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
+ Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
+
+#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
+
+/*defines for IO Unit Page 3 GPIOVal field */
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
+
+
+/*IO Unit Page 5 */
+
+/*
+ *Upper layer code (drivers, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U64
+ RaidAcceleratorBufferBaseAddress; /*0x04 */
+ U64
+ RaidAcceleratorBufferSize; /*0x0C */
+ U64
+ RaidAcceleratorControlBaseAddress; /*0x14 */
+ U8 RAControlSize; /*0x1C */
+ U8 NumDmaEngines; /*0x1D */
+ U8 RAMinControlSize; /*0x1E */
+ U8 RAMaxControlSize; /*0x1F */
+ U32 Reserved1; /*0x20 */
+ U32 Reserved2; /*0x24 */
+ U32 Reserved3; /*0x28 */
+ U32
+ DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+ Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
+
+/*defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
+
+
+/*IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 Flags; /*0x04 */
+ U8 RAHostControlSize; /*0x06 */
+ U8 Reserved0; /*0x07 */
+ U64
+ RaidAcceleratorHostControlBaseAddress; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+ U32 Reserved3; /*0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+ Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
+
+/*defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+
+
+/*IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 CurrentPowerMode; /*0x04 */
+ U8 PreviousPowerMode; /*0x05 */
+ U8 PCIeWidth; /*0x06 */
+ U8 PCIeSpeed; /*0x07 */
+ U32 ProcessorState; /*0x08 */
+ U32
+ PowerManagementCapabilities; /*0x0C */
+ U16 IOCTemperature; /*0x10 */
+ U8
+ IOCTemperatureUnits; /*0x12 */
+ U8 IOCSpeed; /*0x13 */
+ U16 BoardTemperature; /*0x14 */
+ U8
+ BoardTemperatureUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 BoardPowerRequirement; /*0x18 */
+ U32 PCISlotPowerAllocation; /*0x1C */
+/* reserved prior to MPI v2.6 */
+ U8 Flags; /* 0x20 */
+ U8 Reserved6; /* 0x21 */
+ U16 Reserved7; /* 0x22 */
+ U32 Reserved8; /* 0x24 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+ Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x05)
+
+/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
+#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
+#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00)
+#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40)
+#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80)
+#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0)
+
+#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01)
+#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04)
+#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05)
+#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06)
+
+
+/*defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10)
+
+/*defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03)
+
+/*defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+
+/*defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001)
+
+/*obsolete names for the PowerManagementCapabilities bits (above) */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */
+
+
+/*defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
+
+/*defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
+
+/*defines for IO Unit Page 7 BoardTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
+
+/* defines for IO Unit Page 7 Flags field */
+#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01)
+
+/*IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+ U16 Flags; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U16
+ Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
+ U32 Reserved2; /*0x0C */
+ U32 Reserved3; /*0x10 */
+ U32 Reserved4; /*0x14 */
+} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
+ Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
+
+/*defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U8 NumSensors; /*0x0C */
+ U8 PollingInterval; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI2_IOUNIT8_SENSOR
+ Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+ Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
+
+
+/*IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+ U16 CurrentTemperature; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U8 Flags; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U16 Reserved3; /*0x06 */
+ U32 Reserved4; /*0x08 */
+ U32 Reserved5; /*0x0C */
+} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
+ Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
+
+/*defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U8 NumSensors; /*0x0C */
+ U8 Reserved4; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI2_IOUNIT9_SENSOR
+ Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+ Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
+
+
+/*IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+ U8 CreditPercent; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_IOUNIT10_FUNCTION,
+ *PTR_MPI2_IOUNIT10_FUNCTION,
+ Mpi2IOUnit10Function_t,
+ *pMpi2IOUnit10Function_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumFunctions; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ MPI2_IOUNIT10_FUNCTION
+ Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10,
+ *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+ Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
+
+
+/* IO Unit Page 11 (for MPI v2.6 and later) */
+
+typedef struct _MPI26_IOUNIT11_SPINUP_GROUP {
+ U8 MaxTargetSpinup; /* 0x00 */
+ U8 SpinupDelay; /* 0x01 */
+ U8 SpinupFlags; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+} MPI26_IOUNIT11_SPINUP_GROUP,
+ *PTR_MPI26_IOUNIT11_SPINUP_GROUP,
+ Mpi26IOUnit11SpinupGroup_t,
+ *pMpi26IOUnit11SpinupGroup_t;
+
+/* defines for IO Unit Page 11 SpinupFlags */
+#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * four and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_IOUNITPAGE11_PHY_MAX
+#define MPI26_IOUNITPAGE11_PHY_MAX (4)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */
+ U32 Reserved2; /*0x18 */
+ U32 Reserved3; /*0x1C */
+ U32 Reserved4; /*0x20 */
+ U8 BootDeviceWaitTime; /*0x24 */
+ U8 Reserved5; /*0x25 */
+ U16 Reserved6; /*0x26 */
+ U8 NumPhys; /*0x28 */
+ U8 PEInitialSpinupDelay; /*0x29 */
+ U8 PEReplyDelay; /*0x2A */
+ U8 Flags; /*0x2B */
+ U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */
+} MPI26_CONFIG_PAGE_IO_UNIT_11,
+ *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11,
+ Mpi26IOUnitPage11_t,
+ *pMpi26IOUnitPage11_t;
+
+#define MPI26_IOUNITPAGE11_PAGEVERSION (0x00)
+
+/* defines for Flags field */
+#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01)
+
+/* defines for PHY field */
+#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03)
+
+
+
+
+
+
+/****************************************************************************
+* IOC Config Pages
+****************************************************************************/
+
+/*IOC Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U16 VendorID; /*0x0C */
+ U16 DeviceID; /*0x0E */
+ U8 RevisionID; /*0x10 */
+ U8 Reserved3; /*0x11 */
+ U16 Reserved4; /*0x12 */
+ U32 ClassCode; /*0x14 */
+ U16 SubsystemVendorID; /*0x18 */
+ U16 SubsystemID; /*0x1A */
+} MPI2_CONFIG_PAGE_IOC_0,
+ *PTR_MPI2_CONFIG_PAGE_IOC_0,
+ Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
+
+#define MPI2_IOCPAGE0_PAGEVERSION (0x02)
+
+
+/*IOC Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Flags; /*0x04 */
+ U32 CoalescingTimeout; /*0x08 */
+ U8 CoalescingDepth; /*0x0C */
+ U8 PCISlotNum; /*0x0D */
+ U8 PCIBusNum; /*0x0E */
+ U8 PCIDomainSegment; /*0x0F */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_1,
+ *PTR_MPI2_CONFIG_PAGE_IOC_1,
+ Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
+
+#define MPI2_IOCPAGE1_PAGEVERSION (0x05)
+
+/*defines for IOC Page 1 Flags field */
+#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
+
+#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
+#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
+#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
+
+/*IOC Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32
+ CapabilitiesFlags; /*0x04 */
+ U8 MaxDrivesRAID0; /*0x08 */
+ U8 MaxDrivesRAID1; /*0x09 */
+ U8
+ MaxDrivesRAID1E; /*0x0A */
+ U8
+ MaxDrivesRAID10; /*0x0B */
+ U8 MinDrivesRAID0; /*0x0C */
+ U8 MinDrivesRAID1; /*0x0D */
+ U8
+ MinDrivesRAID1E; /*0x0E */
+ U8
+ MinDrivesRAID10; /*0x0F */
+ U32 Reserved1; /*0x10 */
+ U8
+ MaxGlobalHotSpares; /*0x14 */
+ U8 MaxPhysDisks; /*0x15 */
+ U8 MaxVolumes; /*0x16 */
+ U8 MaxConfigs; /*0x17 */
+ U8 MaxOCEDisks; /*0x18 */
+ U8 Reserved2; /*0x19 */
+ U16 Reserved3; /*0x1A */
+ U32
+ SupportedStripeSizeMapRAID0; /*0x1C */
+ U32
+ SupportedStripeSizeMapRAID1E; /*0x20 */
+ U32
+ SupportedStripeSizeMapRAID10; /*0x24 */
+ U32 Reserved4; /*0x28 */
+ U32 Reserved5; /*0x2C */
+ U16
+ DefaultMetadataSize; /*0x30 */
+ U16 Reserved6; /*0x32 */
+ U16
+ MaxBadBlockTableEntries; /*0x34 */
+ U16 Reserved7; /*0x36 */
+ U32
+ IRNvsramVersion; /*0x38 */
+} MPI2_CONFIG_PAGE_IOC_6,
+ *PTR_MPI2_CONFIG_PAGE_IOC_6,
+ Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
+
+#define MPI2_IOCPAGE6_PAGEVERSION (0x05)
+
+/*defines for IOC Page 6 CapabilitiesFlags */
+#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
+#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
+
+
+/*IOC Page 7 */
+
+#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32
+ EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
+ U16 SASBroadcastPrimitiveMasks; /*0x18 */
+ U16 SASNotifyPrimitiveMasks; /*0x1A */
+ U32 Reserved3; /*0x1C */
+} MPI2_CONFIG_PAGE_IOC_7,
+ *PTR_MPI2_CONFIG_PAGE_IOC_7,
+ Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
+
+#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
+
+
+/*IOC Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumDevsPerEnclosure; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U16 MaxPersistentEntries; /*0x08 */
+ U16 MaxNumPhysicalMappedIDs; /*0x0A */
+ U16 Flags; /*0x0C */
+ U16 Reserved3; /*0x0E */
+ U16 IRVolumeMappingFlags; /*0x10 */
+ U16 Reserved4; /*0x12 */
+ U32 Reserved5; /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_8,
+ *PTR_MPI2_CONFIG_PAGE_IOC_8,
+ Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
+
+#define MPI2_IOCPAGE8_PAGEVERSION (0x00)
+
+/*defines for IOC Page 8 Flags field */
+#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
+#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
+
+#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
+#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
+#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
+
+#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
+#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
+
+/*defines for IOC Page 8 IRVolumeMappingFlags */
+#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
+#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
+#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
+
+
+/****************************************************************************
+* BIOS Config Pages
+****************************************************************************/
+
+/*BIOS Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 BiosOptions; /*0x04 */
+ U32 IOCSettings; /*0x08 */
+ U8 SSUTimeout; /*0x0C */
+ U8 Reserved1; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 DeviceSettings; /*0x10 */
+ U16 NumberOfDevices; /*0x14 */
+ U16 UEFIVersion; /*0x16 */
+ U16 IOTimeoutBlockDevicesNonRM; /*0x18 */
+ U16 IOTimeoutSequential; /*0x1A */
+ U16 IOTimeoutOther; /*0x1C */
+ U16 IOTimeoutBlockDevicesRM; /*0x1E */
+} MPI2_CONFIG_PAGE_BIOS_1,
+ *PTR_MPI2_CONFIG_PAGE_BIOS_1,
+ Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
+
+#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
+
+/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
+#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
+#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
+#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
+#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
+
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
+
+/*values for BIOS Page 1 IOCSettings field */
+#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
+#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
+#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
+#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
+#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
+#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
+#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
+
+#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
+
+/*values for BIOS Page 1 DeviceSettings field */
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
+
+/*defines for BIOS Page 1 UEFIVersion field */
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
+
+
+
+/*BIOS Page 2 */
+
+typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
+ U32 Reserved1; /*0x00 */
+ U32 Reserved2; /*0x04 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+ *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+ Mpi2BootDeviceAdapterOrder_t,
+ *pMpi2BootDeviceAdapterOrder_t;
+
+typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
+ U64 SASAddress; /*0x00 */
+ U8 LUN[8]; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_BOOT_DEVICE_SAS_WWID,
+ *PTR_MPI2_BOOT_DEVICE_SAS_WWID,
+ Mpi2BootDeviceSasWwid_t,
+ *pMpi2BootDeviceSasWwid_t;
+
+typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
+ U64 EnclosureLogicalID; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ U16 SlotNumber; /*0x10 */
+ U16 Reserved3; /*0x12 */
+ U32 Reserved4; /*0x14 */
+} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+ *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+ Mpi2BootDeviceEnclosureSlot_t,
+ *pMpi2BootDeviceEnclosureSlot_t;
+
+typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
+ U64 DeviceName; /*0x00 */
+ U8 LUN[8]; /*0x08 */
+ U32 Reserved1; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI2_BOOT_DEVICE_DEVICE_NAME,
+ *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
+ Mpi2BootDeviceDeviceName_t,
+ *pMpi2BootDeviceDeviceName_t;
+
+typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
+ MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
+ MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
+ MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
+ MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
+} MPI2_BIOSPAGE2_BOOT_DEVICE,
+ *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
+ Mpi2BiosPage2BootDevice_t,
+ *pMpi2BiosPage2BootDevice_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ U32 Reserved4; /*0x10 */
+ U32 Reserved5; /*0x14 */
+ U32 Reserved6; /*0x18 */
+ U8 ReqBootDeviceForm; /*0x1C */
+ U8 Reserved7; /*0x1D */
+ U16 Reserved8; /*0x1E */
+ MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */
+ U8 ReqAltBootDeviceForm; /*0x38 */
+ U8 Reserved9; /*0x39 */
+ U16 Reserved10; /*0x3A */
+ MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */
+ U8 CurrentBootDeviceForm; /*0x58 */
+ U8 Reserved11; /*0x59 */
+ U16 Reserved12; /*0x5A */
+ MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */
+} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
+ Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
+
+#define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
+
+/*values for BIOS Page 2 BootDeviceForm fields */
+#define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
+#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
+#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
+#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
+#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
+
+
+/*BIOS Page 3 */
+
+#define MPI2_BIOSPAGE3_NUM_ADAPTER (4)
+
+typedef struct _MPI2_ADAPTER_INFO {
+ U8 PciBusNumber; /*0x00 */
+ U8 PciDeviceAndFunctionNumber; /*0x01 */
+ U16 AdapterFlags; /*0x02 */
+} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
+ Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
+
+#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
+#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
+
+typedef struct _MPI2_ADAPTER_ORDER_AUX {
+ U64 WWID; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+} MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX,
+ Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t;
+
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U32 GlobalFlags; /*0x04 */
+ U32 BiosVersion; /*0x08 */
+ MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER];
+ U32 Reserved1; /*0x1C */
+ MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER];
+} MPI2_CONFIG_PAGE_BIOS_3,
+ *PTR_MPI2_CONFIG_PAGE_BIOS_3,
+ Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
+
+#define MPI2_BIOSPAGE3_PAGEVERSION (0x01)
+
+/*values for BIOS Page 3 GlobalFlags */
+#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
+#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
+#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
+
+#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
+#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
+
+
+/*BIOS Page 4 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
+#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_BIOS4_ENTRY {
+ U64 ReassignmentWWID; /*0x00 */
+ U64 ReassignmentDeviceName; /*0x08 */
+} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
+ Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ MPI2_BIOS4_ENTRY
+ Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
+} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
+ Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
+
+#define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
+
+
+/****************************************************************************
+* RAID Volume Config Pages
+****************************************************************************/
+
+/*RAID Volume Page 0 */
+
+typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
+ U8 RAIDSetNum; /*0x00 */
+ U8 PhysDiskMap; /*0x01 */
+ U8 PhysDiskNum; /*0x02 */
+ U8 Reserved; /*0x03 */
+} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
+ Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
+#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
+
+typedef struct _MPI2_RAIDVOL0_SETTINGS {
+ U16 Settings; /*0x00 */
+ U8 HotSparePool; /*0x01 */
+ U8 Reserved; /*0x02 */
+} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
+ Mpi2RaidVol0Settings_t,
+ *pMpi2RaidVol0Settings_t;
+
+/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
+#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
+#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
+#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
+#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
+#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
+#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
+#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
+#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
+
+/*RAID Volume Page 0 VolumeSettings defines */
+#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
+#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
+
+#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
+#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
+#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
+#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDisks at runtime.
+ */
+#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
+#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U8 VolumeState; /*0x06 */
+ U8 VolumeType; /*0x07 */
+ U32 VolumeStatusFlags; /*0x08 */
+ MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */
+ U64 MaxLBA; /*0x10 */
+ U32 StripeSize; /*0x18 */
+ U16 BlockSize; /*0x1C */
+ U16 Reserved1; /*0x1E */
+ U8 SupportedPhysDisks;/*0x20 */
+ U8 ResyncRate; /*0x21 */
+ U16 DataScrubDuration; /*0x22 */
+ U8 NumPhysDisks; /*0x24 */
+ U8 Reserved2; /*0x25 */
+ U8 Reserved3; /*0x26 */
+ U8 InactiveStatus; /*0x27 */
+ MPI2_RAIDVOL0_PHYS_DISK
+ PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
+} MPI2_CONFIG_PAGE_RAID_VOL_0,
+ *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
+ Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
+
+#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
+
+/*values for RAID VolumeState */
+#define MPI2_RAID_VOL_STATE_MISSING (0x00)
+#define MPI2_RAID_VOL_STATE_FAILED (0x01)
+#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
+#define MPI2_RAID_VOL_STATE_ONLINE (0x03)
+#define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
+#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
+
+/*values for RAID VolumeType */
+#define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
+#define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
+#define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
+#define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
+#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
+
+/*values for RAID Volume Page 0 VolumeStatusFlags field */
+#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
+#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
+#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
+#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
+
+/*values for RAID Volume Page 0 SupportedPhysDisks field */
+#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
+#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
+#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
+#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
+
+/*values for RAID Volume Page 0 InactiveStatus field */
+#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
+#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
+#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
+#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
+#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
+
+
+/*RAID Volume Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U16 Reserved0; /*0x06 */
+ U8 GUID[24]; /*0x08 */
+ U8 Name[16]; /*0x20 */
+ U64 WWID; /*0x30 */
+ U32 Reserved1; /*0x38 */
+ U32 Reserved2; /*0x3C */
+} MPI2_CONFIG_PAGE_RAID_VOL_1,
+ *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
+ Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
+
+#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
+
+
+/****************************************************************************
+* RAID Physical Disk Config Pages
+****************************************************************************/
+
+/*RAID Physical Disk Page 0 */
+
+typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
+ U16 Reserved1; /*0x00 */
+ U8 HotSparePool; /*0x02 */
+ U8 Reserved2; /*0x03 */
+} MPI2_RAIDPHYSDISK0_SETTINGS,
+ *PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
+ Mpi2RaidPhysDisk0Settings_t,
+ *pMpi2RaidPhysDisk0Settings_t;
+
+/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
+
+typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
+ U8 VendorID[8]; /*0x00 */
+ U8 ProductID[16]; /*0x08 */
+ U8 ProductRevLevel[4]; /*0x18 */
+ U8 SerialNum[32]; /*0x1C */
+} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+ *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+ Mpi2RaidPhysDisk0InquiryData_t,
+ *pMpi2RaidPhysDisk0InquiryData_t;
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 PhysDiskNum; /*0x07 */
+ MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */
+ U32 Reserved3; /*0x4C */
+ U8 PhysDiskState; /*0x50 */
+ U8 OfflineReason; /*0x51 */
+ U8 IncompatibleReason; /*0x52 */
+ U8 PhysDiskAttributes; /*0x53 */
+ U32 PhysDiskStatusFlags;/*0x54 */
+ U64 DeviceMaxLBA; /*0x58 */
+ U64 HostMaxLBA; /*0x60 */
+ U64 CoercedMaxLBA; /*0x68 */
+ U16 BlockSize; /*0x70 */
+ U16 Reserved5; /*0x72 */
+ U32 Reserved6; /*0x74 */
+} MPI2_CONFIG_PAGE_RD_PDISK_0,
+ *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
+ Mpi2RaidPhysDiskPage0_t,
+ *pMpi2RaidPhysDiskPage0_t;
+
+#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
+
+/*PhysDiskState defines */
+#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
+#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
+#define MPI2_RAID_PD_STATE_OFFLINE (0x02)
+#define MPI2_RAID_PD_STATE_ONLINE (0x03)
+#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
+#define MPI2_RAID_PD_STATE_DEGRADED (0x05)
+#define MPI2_RAID_PD_STATE_REBUILDING (0x06)
+#define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
+
+/*OfflineReason defines */
+#define MPI2_PHYSDISK0_ONLINE (0x00)
+#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
+#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
+#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
+#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
+
+/*IncompatibleReason defines */
+#define MPI2_PHYSDISK0_COMPATIBLE (0x00)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
+
+/*PhysDiskAttributes defines */
+#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
+#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
+#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
+
+#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
+#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
+#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
+
+/*PhysDiskStatusFlags defines */
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
+#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
+#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
+#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
+
+
+/*RAID Physical Disk Page 1 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
+#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
+#endif
+
+typedef struct _MPI2_RAIDPHYSDISK1_PATH {
+ U16 DevHandle; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U64 WWID; /*0x04 */
+ U64 OwnerWWID; /*0x0C */
+ U8 OwnerIdentifier; /*0x14 */
+ U8 Reserved2; /*0x15 */
+ U16 Flags; /*0x16 */
+} MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
+ Mpi2RaidPhysDisk1Path_t,
+ *pMpi2RaidPhysDisk1Path_t;
+
+/*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
+#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
+#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
+#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
+ MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhysDiskPaths; /*0x04 */
+ U8 PhysDiskNum; /*0x05 */
+ U16 Reserved1; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ MPI2_RAIDPHYSDISK1_PATH
+ PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
+} MPI2_CONFIG_PAGE_RD_PDISK_1,
+ *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
+ Mpi2RaidPhysDiskPage1_t,
+ *pMpi2RaidPhysDiskPage1_t;
+
+#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
+
+
+/****************************************************************************
+* values for fields used by several types of SAS Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
+#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
+#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
+/*link rates used for Negotiated Physical and Logical Link Rate */
+#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
+#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
+#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
+#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
+#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
+#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
+#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
+#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
+#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
+#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C)
+
+
+/*values for AttachedPhyInfo fields */
+#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
+#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
+#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
+
+#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
+#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
+#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
+#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
+#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
+#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
+#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
+#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
+#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
+#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
+
+
+/*values for PhyInfo fields */
+#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
+#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
+
+#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
+#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
+#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
+#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
+
+#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
+#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
+#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
+#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
+#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
+#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
+#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
+#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
+#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
+#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
+
+#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
+#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
+
+#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
+#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
+
+#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
+#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
+#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
+#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
+
+
+/*values for SAS ProgrammedLinkRate fields */
+#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
+#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
+#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
+#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0)
+#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
+#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
+#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
+#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
+#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
+#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C)
+
+
+/*values for SAS HwLinkRate fields */
+#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
+#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
+#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
+#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0)
+#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
+#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
+#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
+#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
+#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C)
+
+
+
+/****************************************************************************
+* SAS IO Unit Config Pages
+****************************************************************************/
+
+/*SAS IO Unit Page 0 */
+
+typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
+ U8 Port; /*0x00 */
+ U8 PortFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 NegotiatedLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo;/*0x04 */
+ U16 AttachedDevHandle; /*0x08 */
+ U16 ControllerDevHandle; /*0x0A */
+ U32 DiscoveryStatus; /*0x0C */
+ U32 Reserved; /*0x10 */
+} MPI2_SAS_IO_UNIT0_PHY_DATA,
+ *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
+ Mpi2SasIOUnit0PhyData_t,
+ *pMpi2SasIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
+#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1;/*0x08 */
+ U8 NumPhys; /*0x0C */
+ U8 Reserved2;/*0x0D */
+ U16 Reserved3;/*0x0E */
+ MPI2_SAS_IO_UNIT0_PHY_DATA
+ PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_0,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
+ Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
+
+#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
+
+/*values for SAS IO Unit Page 0 PortFlags */
+#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
+#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
+
+/*values for SAS IO Unit Page 0 PhyFlags */
+#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
+#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
+#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
+#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
+
+/*values for SAS IO Unit Page 0 DiscoveryStatus */
+#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
+#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
+#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
+#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
+#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
+#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
+
+
+/*SAS IO Unit Page 1 */
+
+typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
+ U8 Port; /*0x00 */
+ U8 PortFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 MaxMinLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo; /*0x04 */
+ U16 MaxTargetPortConnectTime; /*0x08 */
+ U16 Reserved1; /*0x0A */
+} MPI2_SAS_IO_UNIT1_PHY_DATA,
+ *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
+ Mpi2SasIOUnit1PhyData_t,
+ *pMpi2SasIOUnit1PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
+#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16
+ ControlFlags; /*0x08 */
+ U16
+ SASNarrowMaxQueueDepth; /*0x0A */
+ U16
+ AdditionalControlFlags; /*0x0C */
+ U16
+ SASWideMaxQueueDepth; /*0x0E */
+ U8
+ NumPhys; /*0x10 */
+ U8
+ SATAMaxQDepth; /*0x11 */
+ U8
+ ReportDeviceMissingDelay; /*0x12 */
+ U8
+ IODeviceMissingDelay; /*0x13 */
+ MPI2_SAS_IO_UNIT1_PHY_DATA
+ PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_1,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
+ Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
+
+#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
+
+/*values for SAS IO Unit Page 1 ControlFlags */
+#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
+
+#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
+#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
+
+#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
+#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
+#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
+#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
+#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
+
+/*values for SAS IO Unit Page 1 AdditionalControlFlags */
+#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
+#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
+#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
+#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
+#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
+#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
+#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
+#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
+#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
+
+/*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
+#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
+#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
+
+/*values for SAS IO Unit Page 1 PortFlags */
+#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
+
+/*values for SAS IO Unit Page 1 PhyFlags */
+#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
+#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
+#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
+#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+
+/*values for SAS IO Unit Page 1 MaxMinLinkRate */
+#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
+#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
+#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
+#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
+#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0)
+#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
+#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
+#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
+#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
+#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
+#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C)
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
+
+
+/*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */
+
+typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
+ U8 MaxTargetSpinup; /*0x00 */
+ U8 SpinupDelay; /*0x01 */
+ U8 SpinupFlags; /*0x02 */
+ U8 Reserved1; /*0x03 */
+} MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+ *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+ Mpi2SasIOUnit4SpinupGroup_t,
+ *pMpi2SasIOUnit4SpinupGroup_t;
+/*defines for SAS IO Unit Page 4 SpinupFlags */
+#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
+#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */
+ MPI2_SAS_IOUNIT4_SPINUP_GROUP
+ SpinupGroupParameters[4]; /*0x08 */
+ U32
+ Reserved1; /*0x18 */
+ U32
+ Reserved2; /*0x1C */
+ U32
+ Reserved3; /*0x20 */
+ U8
+ BootDeviceWaitTime; /*0x24 */
+ U8
+ SATADeviceWaitTime; /*0x25 */
+ U16
+ Reserved5; /*0x26 */
+ U8
+ NumPhys; /*0x28 */
+ U8
+ PEInitialSpinupDelay; /*0x29 */
+ U8
+ PEReplyDelay; /*0x2A */
+ U8
+ Flags; /*0x2B */
+ U8
+ PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */
+} MPI2_CONFIG_PAGE_SASIOUNIT_4,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
+ Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
+
+#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
+
+/*defines for PHY field */
+#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
+
+
+/*SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+ U8 ControlFlags; /*0x00 */
+ U8 PortWidthModGroup; /*0x01 */
+ U16 InactivityTimerExponent; /*0x02 */
+ U8 SATAPartialTimeout; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U8 SATASlumberTimeout; /*0x06 */
+ U8 Reserved3; /*0x07 */
+ U8 SASPartialTimeout; /*0x08 */
+ U8 Reserved4; /*0x09 */
+ U8 SASSlumberTimeout; /*0x0A */
+ U8 Reserved5; /*0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ Mpi2SasIOUnit5PhyPmSettings_t,
+ *pMpi2SasIOUnit5PhyPmSettings_t;
+
+/*defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+
+/*defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
+
+/*defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 NumPhys; /*0x08 */
+ U8 Reserved1;/*0x09 */
+ U16 Reserved2;/*0x0A */
+ U32 Reserved3;/*0x0C */
+ MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
+ SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
+
+
+/*SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+ U8 CurrentStatus; /*0x00 */
+ U8 CurrentModulation; /*0x01 */
+ U8 CurrentUtilization; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 Reserved2; /*0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+ *pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/*defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
+
+/*defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ U8 NumGroups; /*0x10 */
+ U8 Reserved3; /*0x11 */
+ U16 Reserved4; /*0x12 */
+ MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+ PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
+
+
+/*SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+ U8 Flags; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U8 Threshold75Pct; /*0x04 */
+ U8 Threshold50Pct; /*0x05 */
+ U8 Threshold25Pct; /*0x06 */
+ U8 Reserved3; /*0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+ *pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 SamplingInterval; /*0x08 */
+ U8 WindowLength; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U32 Reserved2; /*0x0C */
+ U32 Reserved3; /*0x10 */
+ U8 NumGroups; /*0x14 */
+ U8 Reserved4; /*0x15 */
+ U16 Reserved5; /*0x16 */
+ MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+ PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
+
+
+/*SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved1; /*0x08 */
+ U32
+ PowerManagementCapabilities; /*0x0C */
+ U8
+ TxRxSleepStatus; /*0x10 */
+ U8
+ Reserved2; /*0x11 */
+ U16
+ Reserved3; /*0x12 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
+
+/*defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
+
+/*defines for TxRxSleepStatus field */
+#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03)
+
+
+
+/*SAS IO Unit Page 16 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U64
+ TimeStamp; /*0x08 */
+ U32
+ Reserved1; /*0x10 */
+ U32
+ Reserved2; /*0x14 */
+ U32
+ FastPathPendedRequests; /*0x18 */
+ U32
+ FastPathUnPendedRequests; /*0x1C */
+ U32
+ FastPathHostRequestStarts; /*0x20 */
+ U32
+ FastPathFirmwareRequestStarts; /*0x24 */
+ U32
+ FastPathHostCompletions; /*0x28 */
+ U32
+ FastPathFirmwareCompletions; /*0x2C */
+ U32
+ NonFastPathRequestStarts; /*0x30 */
+ U32
+ NonFastPathHostCompletions; /*0x30 */
+} MPI2_CONFIG_PAGE_SASIOUNIT16,
+ *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
+ Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
+
+#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
+
+
+/****************************************************************************
+* SAS Expander Config Pages
+****************************************************************************/
+
+/*SAS Expander Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U8
+ PhysicalPort; /*0x08 */
+ U8
+ ReportGenLength; /*0x09 */
+ U16
+ EnclosureHandle; /*0x0A */
+ U64
+ SASAddress; /*0x0C */
+ U32
+ DiscoveryStatus; /*0x14 */
+ U16
+ DevHandle; /*0x18 */
+ U16
+ ParentDevHandle; /*0x1A */
+ U16
+ ExpanderChangeCount; /*0x1C */
+ U16
+ ExpanderRouteIndexes; /*0x1E */
+ U8
+ NumPhys; /*0x20 */
+ U8
+ SASLevel; /*0x21 */
+ U16
+ Flags; /*0x22 */
+ U16
+ STPBusInactivityTimeLimit; /*0x24 */
+ U16
+ STPMaxConnectTimeLimit; /*0x26 */
+ U16
+ STP_SMP_NexusLossTime; /*0x28 */
+ U16
+ MaxNumRoutedSasAddresses; /*0x2A */
+ U64
+ ActiveZoneManagerSASAddress;/*0x2C */
+ U16
+ ZoneLockInactivityLimit; /*0x34 */
+ U16
+ Reserved1; /*0x36 */
+ U8
+ TimeToReducedFunc; /*0x38 */
+ U8
+ InitialTimeToReducedFunc; /*0x39 */
+ U8
+ MaxReducedFuncTime; /*0x3A */
+ U8
+ Reserved2; /*0x3B */
+} MPI2_CONFIG_PAGE_EXPANDER_0,
+ *PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
+ Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
+
+#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
+
+/*values for SAS Expander Page 0 DiscoveryStatus field */
+#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
+#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
+#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
+#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
+
+/*values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
+#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
+#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
+#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
+#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
+#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
+#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
+
+
+/*SAS Expander Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U8
+ PhysicalPort; /*0x08 */
+ U8
+ Reserved1; /*0x09 */
+ U16
+ Reserved2; /*0x0A */
+ U8
+ NumPhys; /*0x0C */
+ U8
+ Phy; /*0x0D */
+ U16
+ NumTableEntriesProgrammed; /*0x0E */
+ U8
+ ProgrammedLinkRate; /*0x10 */
+ U8
+ HwLinkRate; /*0x11 */
+ U16
+ AttachedDevHandle; /*0x12 */
+ U32
+ PhyInfo; /*0x14 */
+ U32
+ AttachedDeviceInfo; /*0x18 */
+ U16
+ ExpanderDevHandle; /*0x1C */
+ U8
+ ChangeCount; /*0x1E */
+ U8
+ NegotiatedLinkRate; /*0x1F */
+ U8
+ PhyIdentifier; /*0x20 */
+ U8
+ AttachedPhyIdentifier; /*0x21 */
+ U8
+ Reserved3; /*0x22 */
+ U8
+ DiscoveryInfo; /*0x23 */
+ U32
+ AttachedPhyInfo; /*0x24 */
+ U8
+ ZoneGroup; /*0x28 */
+ U8
+ SelfConfigStatus; /*0x29 */
+ U16
+ Reserved4; /*0x2A */
+} MPI2_CONFIG_PAGE_EXPANDER_1,
+ *PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
+ Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
+
+#define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
+ *used for the AttachedDeviceInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*values for SAS Expander Page 1 DiscoveryInfo field */
+#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
+#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
+#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+
+/****************************************************************************
+* SAS Device Config Pages
+****************************************************************************/
+
+/*SAS Device Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U16
+ Slot; /*0x08 */
+ U16
+ EnclosureHandle; /*0x0A */
+ U64
+ SASAddress; /*0x0C */
+ U16
+ ParentDevHandle; /*0x14 */
+ U8
+ PhyNum; /*0x16 */
+ U8
+ AccessStatus; /*0x17 */
+ U16
+ DevHandle; /*0x18 */
+ U8
+ AttachedPhyIdentifier; /*0x1A */
+ U8
+ ZoneGroup; /*0x1B */
+ U32
+ DeviceInfo; /*0x1C */
+ U16
+ Flags; /*0x20 */
+ U8
+ PhysicalPort; /*0x22 */
+ U8
+ MaxPortConnections; /*0x23 */
+ U64
+ DeviceName; /*0x24 */
+ U8
+ PortGroups; /*0x2C */
+ U8
+ DmaGroup; /*0x2D */
+ U8
+ ControlGroup; /*0x2E */
+ U8
+ EnclosureLevel; /*0x2F */
+ U32
+ ConnectorName[4]; /*0x30 */
+ U32
+ Reserved3; /*0x34 */
+} MPI2_CONFIG_PAGE_SAS_DEV_0,
+ *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
+ Mpi2SasDevicePage0_t,
+ *pMpi2SasDevicePage0_t;
+
+#define MPI2_SASDEVICE0_PAGEVERSION (0x09)
+
+/*values for SAS Device Page 0 AccessStatus field */
+#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
+#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
+#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
+#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
+/*specific values for SATA Init failures */
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
+
+/*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
+
+/*values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
+#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000)
+#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000)
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
+#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
+#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
+#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
+
+
+/*SAS Device Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved1; /*0x08 */
+ U64
+ SASAddress; /*0x0C */
+ U32
+ Reserved2; /*0x14 */
+ U16
+ DevHandle; /*0x18 */
+ U16
+ Reserved3; /*0x1A */
+ U8
+ InitialRegDeviceFIS[20];/*0x1C */
+} MPI2_CONFIG_PAGE_SAS_DEV_1,
+ *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
+ Mpi2SasDevicePage1_t,
+ *pMpi2SasDevicePage1_t;
+
+#define MPI2_SASDEVICE1_PAGEVERSION (0x01)
+
+
+/****************************************************************************
+* SAS PHY Config Pages
+****************************************************************************/
+
+/*SAS PHY Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U16
+ OwnerDevHandle; /*0x08 */
+ U16
+ Reserved1; /*0x0A */
+ U16
+ AttachedDevHandle; /*0x0C */
+ U8
+ AttachedPhyIdentifier; /*0x0E */
+ U8
+ Reserved2; /*0x0F */
+ U32
+ AttachedPhyInfo; /*0x10 */
+ U8
+ ProgrammedLinkRate; /*0x14 */
+ U8
+ HwLinkRate; /*0x15 */
+ U8
+ ChangeCount; /*0x16 */
+ U8
+ Flags; /*0x17 */
+ U32
+ PhyInfo; /*0x18 */
+ U8
+ NegotiatedLinkRate; /*0x1C */
+ U8
+ Reserved3; /*0x1D */
+ U16
+ Reserved4; /*0x1E */
+} MPI2_CONFIG_PAGE_SAS_PHY_0,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
+ Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
+
+#define MPI2_SASPHY0_PAGEVERSION (0x03)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*values for SAS PHY Page 0 Flags field */
+#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*SAS PHY Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved1; /*0x08 */
+ U32
+ InvalidDwordCount; /*0x0C */
+ U32
+ RunningDisparityErrorCount; /*0x10 */
+ U32
+ LossDwordSynchCount; /*0x14 */
+ U32
+ PhyResetProblemCount; /*0x18 */
+} MPI2_CONFIG_PAGE_SAS_PHY_1,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
+ Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
+
+#define MPI2_SASPHY1_PAGEVERSION (0x01)
+
+
+/*SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+ U8 PhyEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 PhyEventInfo; /*0x04 */
+} MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
+ Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved1; /*0x08 */
+ U8
+ NumPhyEvents; /*0x0C */
+ U8
+ Reserved2; /*0x0D */
+ U16
+ Reserved3; /*0x0E */
+ MPI2_SASPHY2_PHY_EVENT
+ PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+ Mpi2SasPhyPage2_t,
+ *pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION (0x00)
+
+
+/*SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+ U8 PhyEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U8 CounterType; /*0x04 */
+ U8 ThresholdWindow; /*0x05 */
+ U8 TimeUnits; /*0x06 */
+ U8 Reserved3; /*0x07 */
+ U32 EventThreshold; /*0x08 */
+ U16 ThresholdFlags; /*0x0C */
+ U16 Reserved4; /*0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG,
+ *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+ Mpi2SasPhy3PhyEventConfig_t,
+ *pMpi2SasPhy3PhyEventConfig_t;
+
+/*values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
+
+/*Following codes are product specific and in MPI v2.6 and later */
+#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3)
+#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4)
+#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5)
+#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7)
+#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9)
+#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB)
+#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC)
+
+
+/*values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/*values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved1; /*0x08 */
+ U8
+ NumPhyEvents; /*0x0C */
+ U8
+ Reserved2; /*0x0D */
+ U16
+ Reserved3; /*0x0E */
+ MPI2_SASPHY3_PHY_EVENT_CONFIG
+ PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+ Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION (0x00)
+
+
+/*SAS PHY Page 4 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U16
+ Reserved1; /*0x08 */
+ U8
+ Reserved2; /*0x0A */
+ U8
+ Flags; /*0x0B */
+ U8
+ InitialFrame[28]; /*0x0C */
+} MPI2_CONFIG_PAGE_SAS_PHY_4,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
+ Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
+
+#define MPI2_SASPHY4_PAGEVERSION (0x00)
+
+/*values for the Flags field */
+#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
+#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
+
+
+
+
+/****************************************************************************
+* SAS Port Config Pages
+****************************************************************************/
+
+/*SAS Port Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U8
+ PortNumber; /*0x08 */
+ U8
+ PhysicalPort; /*0x09 */
+ U8
+ PortWidth; /*0x0A */
+ U8
+ PhysicalPortWidth; /*0x0B */
+ U8
+ ZoneGroup; /*0x0C */
+ U8
+ Reserved1; /*0x0D */
+ U16
+ Reserved2; /*0x0E */
+ U64
+ SASAddress; /*0x10 */
+ U32
+ DeviceInfo; /*0x18 */
+ U32
+ Reserved3; /*0x1C */
+ U32
+ Reserved4; /*0x20 */
+} MPI2_CONFIG_PAGE_SAS_PORT_0,
+ *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
+ Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
+
+#define MPI2_SASPORT0_PAGEVERSION (0x00)
+
+/*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
+
+
+/****************************************************************************
+* SAS Enclosure Config Pages
+****************************************************************************/
+
+/*SAS Enclosure Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U64 EnclosureLogicalID; /*0x0C */
+ U16 Flags; /*0x14 */
+ U16 EnclosureHandle; /*0x16 */
+ U16 NumSlots; /*0x18 */
+ U16 StartSlot; /*0x1A */
+ U8 ChassisSlot; /*0x1C */
+ U8 EnclosureLeve; /*0x1D */
+ U16 SEPDevHandle; /*0x1E */
+ U32 Reserved3; /*0x20 */
+ U32 Reserved4; /*0x24 */
+} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+ *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+ Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
+ MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
+
+#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
+
+/*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
+
+#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
+
+/*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
+#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
+#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
+#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
+#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
+#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
+
+/****************************************************************************
+* Log Config Page
+****************************************************************************/
+
+/*Log Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLogEntries at runtime.
+ */
+#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
+#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
+#endif
+
+#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
+
+typedef struct _MPI2_LOG_0_ENTRY {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U16 LogSequence; /*0x0C */
+ U16 LogEntryQualifier; /*0x0E */
+ U8 VP_ID; /*0x10 */
+ U8 VF_ID; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ U8
+ LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
+} MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
+ Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
+
+/*values for Log Page 0 LogEntry LogEntryQualifier field */
+#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
+#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
+#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
+#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
+#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
+
+typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U32 Reserved2; /*0x0C */
+ U16 NumLogEntries;/*0x10 */
+ U16 Reserved3; /*0x12 */
+ MPI2_LOG_0_ENTRY
+ LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
+} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
+ Mpi2LogPage0_t, *pMpi2LogPage0_t;
+
+#define MPI2_LOG_0_PAGEVERSION (0x02)
+
+
+/****************************************************************************
+* RAID Config Page
+****************************************************************************/
+
+/*RAID Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumElements at runtime.
+ */
+#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
+#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
+#endif
+
+typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
+ U16 ElementFlags; /*0x00 */
+ U16 VolDevHandle; /*0x02 */
+ U8 HotSparePool; /*0x04 */
+ U8 PhysDiskNum; /*0x05 */
+ U16 PhysDiskDevHandle; /*0x06 */
+} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+ *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+ Mpi2RaidConfig0ConfigElement_t,
+ *pMpi2RaidConfig0ConfigElement_t;
+
+/*values for the ElementFlags field */
+#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
+#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
+#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
+
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 NumHotSpares; /*0x08 */
+ U8 NumPhysDisks; /*0x09 */
+ U8 NumVolumes; /*0x0A */
+ U8 ConfigNum; /*0x0B */
+ U32 Flags; /*0x0C */
+ U8 ConfigGUID[24]; /*0x10 */
+ U32 Reserved1; /*0x28 */
+ U8 NumElements; /*0x2C */
+ U8 Reserved2; /*0x2D */
+ U16 Reserved3; /*0x2E */
+ MPI2_RAIDCONFIG0_CONFIG_ELEMENT
+ ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
+} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+ *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+ Mpi2RaidConfigurationPage0_t,
+ *pMpi2RaidConfigurationPage0_t;
+
+#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
+
+/*values for RAID Configuration Page 0 Flags field */
+#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
+
+
+/****************************************************************************
+* Driver Persistent Mapping Config Pages
+****************************************************************************/
+
+/*Driver Persistent Mapping Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
+ U64 PhysicalIdentifier; /*0x00 */
+ U16 MappingInformation; /*0x08 */
+ U16 DeviceIndex; /*0x0A */
+ U32 PhysicalBitsMapping; /*0x0C */
+ U32 Reserved1; /*0x10 */
+} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+ *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+ Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */
+} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+ *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+ Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
+
+#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
+
+/*values for Driver Persistent Mapping Page 0 MappingInformation field */
+#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
+#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
+#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
+
+
+/****************************************************************************
+* Ethernet Config Pages
+****************************************************************************/
+
+/*Ethernet Page 0 */
+
+/*IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+ U32 IPv4Addr;
+ U32 IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
+ Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 NumInterfaces; /*0x08 */
+ U8 Reserved0; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U32 Status; /*0x0C */
+ U8 MediaState; /*0x10 */
+ U8 Reserved2; /*0x11 */
+ U16 Reserved3; /*0x12 */
+ U8 MacAddress[6]; /*0x14 */
+ U8 Reserved4; /*0x1A */
+ U8 Reserved5; /*0x1B */
+ MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */
+ MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */
+ MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */
+ MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */
+ MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */
+ MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */
+ U8
+ HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0,
+ *PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+ Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
+
+/*values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
+
+/*values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
+#define MPI2_ETHPG0_MS_10MBIT (0x01)
+#define MPI2_ETHPG0_MS_100MBIT (0x02)
+#define MPI2_ETHPG0_MS_1GBIT (0x03)
+
+
+/*Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ Reserved0; /*0x08 */
+ U32
+ Flags; /*0x0C */
+ U8
+ MediaState; /*0x10 */
+ U8
+ Reserved1; /*0x11 */
+ U16
+ Reserved2; /*0x12 */
+ U8
+ MacAddress[6]; /*0x14 */
+ U8
+ Reserved3; /*0x1A */
+ U8
+ Reserved4; /*0x1B */
+ MPI2_ETHERNET_IP_ADDR
+ StaticIpAddress; /*0x1C */
+ MPI2_ETHERNET_IP_ADDR
+ StaticSubnetMask; /*0x2C */
+ MPI2_ETHERNET_IP_ADDR
+ StaticGatewayIpAddress; /*0x3C */
+ MPI2_ETHERNET_IP_ADDR
+ StaticDNS1IpAddress; /*0x4C */
+ MPI2_ETHERNET_IP_ADDR
+ StaticDNS2IpAddress; /*0x5C */
+ U32
+ Reserved5; /*0x6C */
+ U32
+ Reserved6; /*0x70 */
+ U32
+ Reserved7; /*0x74 */
+ U32
+ Reserved8; /*0x78 */
+ U8
+ HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1,
+ *PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+ Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
+
+/*values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
+
+/*values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
+
+
+/****************************************************************************
+* Extended Manufacturing Config Pages
+****************************************************************************/
+
+/*
+ *Generic structure to use for product-specific extended manufacturing pages
+ *(currently Extended Manufacturing Page 40 through Extended Manufacturing
+ *Page 60).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER
+ Header; /*0x00 */
+ U32
+ ProductSpecificInfo; /*0x08 */
+} MPI2_CONFIG_PAGE_EXT_MAN_PS,
+ *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
+ Mpi2ExtManufacturingPagePS_t,
+ *pMpi2ExtManufacturingPagePS_t;
+
+/*PageVersion should be provided by product-specific code */
+
+
+
+/****************************************************************************
+* values for fields used by several types of PCIe Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
+/*link rates used for Negotiated Physical Link Rate */
+#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
+#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02)
+#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03)
+#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04)
+#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05)
+
+
+/****************************************************************************
+* PCIe IO Unit Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe IO Unit Page 0 */
+
+typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 NegotiatedLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo;/*0x04 */
+ U16 AttachedDevHandle; /*0x08 */
+ U16 ControllerDevHandle; /*0x0A */
+ U32 EnumerationStatus; /*0x0C */
+ U32 Reserved1; /*0x10 */
+} MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
+#define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 NumPhys; /*0x0C */
+ U8 InitStatus; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI26_PCIE_IO_UNIT0_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PIOUNIT_0,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
+ Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
+
+#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 0 LinkFlags */
+#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
+
+/*values for PCIe IO Unit Page 0 PhyFlags */
+#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+/*values for PCIe IO Unit Page 0 EnumerationStatus */
+#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
+#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000)
+
+
+/*PCIe IO Unit Page 1 */
+
+typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 MaxMinLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo; /*0x04 */
+ U32 Reserved1; /*0x08 */
+} MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
+
+/*values for LinkFlags */
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
+#define MPI26_PCIE_IOUNIT1_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 ControlFlags; /*0x08 */
+ U16 Reserved; /*0x0A */
+ U16 AdditionalControlFlags; /*0x0C */
+ U16 NVMeMaxQueueDepth; /*0x0E */
+ U8 NumPhys; /*0x10 */
+ U8 Reserved1; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ MPI26_PCIE_IO_UNIT1_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
+} MPI26_CONFIG_PAGE_PIOUNIT_1,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
+ Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
+
+#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 1 PhyFlags */
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01)
+
+/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
+#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+
+/****************************************************************************
+* PCIe Switch Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Switch Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 DevHandle; /*0x0C */
+ U16 ParentDevHandle; /*0x0E */
+ U8 NumPorts; /*0x10 */
+ U8 PCIeLevel; /*0x11 */
+ U16 Reserved3; /*0x12 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+ U32 Reserved6; /*0x1C */
+} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
+ Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
+
+#define MPI26_PCIESWITCH0_PAGEVERSION (0x00)
+
+
+/*PCIe Switch Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumPorts; /*0x0C */
+ U8 PortNum; /*0x0D */
+ U16 AttachedDevHandle; /*0x0E */
+ U16 SwitchDevHandle; /*0x10 */
+ U8 NegotiatedPortWidth; /*0x12 */
+ U8 NegotiatedLinkRate; /*0x13 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
+ Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
+
+#define MPI26_PCIESWITCH1_PAGEVERSION (0x00)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/****************************************************************************
+* PCIe Device Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Device Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 Slot; /*0x08 */
+ U16 EnclosureHandle; /*0x0A */
+ U64 WWID; /*0x0C */
+ U16 ParentDevHandle; /*0x14 */
+ U8 PortNum; /*0x16 */
+ U8 AccessStatus; /*0x17 */
+ U16 DevHandle; /*0x18 */
+ U8 PhysicalPort; /*0x1A */
+ U8 Reserved1; /*0x1B */
+ U32 DeviceInfo; /*0x1C */
+ U32 Flags; /*0x20 */
+ U8 SupportedLinkRates; /*0x24 */
+ U8 MaxPortWidth; /*0x25 */
+ U8 NegotiatedPortWidth; /*0x26 */
+ U8 NegotiatedLinkRate; /*0x27 */
+ U8 EnclosureLevel; /*0x28 */
+ U8 Reserved2; /*0x29 */
+ U16 Reserved3; /*0x2A */
+ U8 ConnectorName[4]; /*0x2C */
+ U32 Reserved4; /*0x30 */
+ U32 Reserved5; /*0x34 */
+} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
+ Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
+
+#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01)
+
+/*values for PCIe Device Page 0 AccessStatus field */
+#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00)
+#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04)
+#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02)
+#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07)
+#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08)
+#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09)
+#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A)
+#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10)
+
+#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38)
+
+#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F)
+
+/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
+ *field
+ */
+
+/*values for PCIe Device Page 0 Flags field */
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
+
+/* values for PCIe Device Page 0 SupportedLinkRates field */
+#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
+#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04)
+#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02)
+#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*PCIe Device Page 2 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x08 */
+ U8 ControllerResetTO; /* 0x0A */
+ U8 Reserved1; /* 0x0B */
+ U32 MaximumDataTransferSize; /*0x0C */
+ U32 Capabilities; /*0x10 */
+ U16 NOIOB; /* 0x14 */
+ U16 Reserved2; /* 0x16 */
+} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
+ Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
+
+#define MPI26_PCIEDEVICE2_PAGEVERSION (0x01)
+
+/*defines for PCIe Device Page 2 Capabilities field */
+#define MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN (0x00000008)
+#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004)
+#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002)
+#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001)
+
+/* Defines for the NOIOB field */
+#define MPI26_PCIEDEV2_NOIOB_UNSUPPORTED (0x0000)
+
+/****************************************************************************
+* PCIe Link Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Link Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 CorrectableErrorCount; /*0x0C */
+ U16 NonFatalErrorCount; /*0x10 */
+ U16 Reserved3; /*0x12 */
+ U16 FatalErrorCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
+ Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
+
+#define MPI26_PCIELINK1_PAGEVERSION (0x00)
+
+/*PCIe Link Page 2 */
+
+typedef struct _MPI26_PCIELINK2_LINK_EVENT {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 LinkEventInfo; /*0x04 */
+} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
+ Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
+
+/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
+#define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK2_LINK_EVENT
+ LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
+ Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
+
+#define MPI26_PCIELINK2_PAGEVERSION (0x00)
+
+/*PCIe Link Page 3 */
+
+typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U8 CounterType; /*0x04 */
+ U8 ThresholdWindow; /*0x05 */
+ U8 TimeUnits; /*0x06 */
+ U8 Reserved3; /*0x07 */
+ U32 EventThreshold; /*0x08 */
+ U16 ThresholdFlags; /*0x0C */
+ U16 Reserved4; /*0x0E */
+} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
+ Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
+
+/*values for LinkEventCode field */
+#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00)
+#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01)
+#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02)
+#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03)
+#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04)
+#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05)
+#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06)
+#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07)
+#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08)
+#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F)
+#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10)
+#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11)
+#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12)
+
+/*values for the CounterType field */
+#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/*values for the TimeUnits field */
+#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00)
+#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01)
+#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02)
+#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
+#define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK3_LINK_EVENT_CONFIG
+ LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
+ Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
+
+#define MPI26_PCIELINK3_PAGEVERSION (0x00)
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
new file mode 100644
index 0000000..6213ce6
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -0,0 +1,591 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_init.h
+ * Title: MPI SCSI initiator mode messages and structures
+ * Creation Date: June 23, 2006
+ *
+ * mpi2_init.h Version: 02.00.21
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
+ * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
+ * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
+ * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
+ * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
+ * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
+ * Control field Task Attribute flags.
+ * Moved LUN field defines to mpi2.h becasue they are
+ * common to many structures.
+ * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
+ * Query Asynchronous Event.
+ * Defined two new bits in the SlotStatus field of the SCSI
+ * Enclosure Processor Request and Reply.
+ * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
+ * both SCSI IO Error Reply and SCSI Task Management Reply.
+ * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
+ * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
+ * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
+ * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
+ * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
+ * 11-18-11 02.00.12 Incorporating additions for MPI v2.5.
+ * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
+ * Priority to match SAM-4.
+ * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
+ * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
+ * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
+ * replacing the Reserved4 field.
+ * 11-18-14 02.00.16 Updated copyright information.
+ * 03-16-15 02.00.17 Updated for MPI v2.6.
+ * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
+ * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
+ * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
+ * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
+ * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
+ * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
+ * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
+ * be unique within first 32 characters.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_INIT_H
+#define MPI2_INIT_H
+
+/*****************************************************************************
+*
+* SCSI Initiator Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SCSI IO messages and associated structures
+****************************************************************************/
+
+typedef struct _MPI2_SCSI_IO_CDB_EEDP32 {
+ U8 CDB[20]; /*0x00 */
+ __be32 PrimaryReferenceTag; /*0x14 */
+ U16 PrimaryApplicationTag; /*0x18 */
+ U16 PrimaryApplicationTagMask; /*0x1A */
+ U32 TransferLength; /*0x1C */
+} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32,
+ Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t;
+
+/*MPI v2.0 CDB field */
+typedef union _MPI2_SCSI_IO_CDB_UNION {
+ U8 CDB32[32];
+ MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+ MPI2_SGE_SIMPLE_UNION SGE;
+} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION,
+ Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t;
+
+/*MPI v2.0 SCSI IO Request Message */
+typedef struct _MPI2_SCSI_IO_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U32 SenseBufferLowAddress; /*0x0C */
+ U16 SGLFlags; /*0x10 */
+ U8 SenseBufferLength; /*0x12 */
+ U8 Reserved4; /*0x13 */
+ U8 SGLOffset0; /*0x14 */
+ U8 SGLOffset1; /*0x15 */
+ U8 SGLOffset2; /*0x16 */
+ U8 SGLOffset3; /*0x17 */
+ U32 SkipCount; /*0x18 */
+ U32 DataLength; /*0x1C */
+ U32 BidirectionalDataLength; /*0x20 */
+ U16 IoFlags; /*0x24 */
+ U16 EEDPFlags; /*0x26 */
+ U32 EEDPBlockSize; /*0x28 */
+ U32 SecondaryReferenceTag; /*0x2C */
+ U16 SecondaryApplicationTag; /*0x30 */
+ U16 ApplicationTagTranslationMask; /*0x32 */
+ U8 LUN[8]; /*0x34 */
+ U32 Control; /*0x3C */
+ MPI2_SCSI_IO_CDB_UNION CDB; /*0x40 */
+
+#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+ MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+ MPI2_SGE_IO_UNION SGL; /*0x60 */
+
+} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST,
+ Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t;
+
+/*SCSI IO MsgFlags bits */
+
+/*MsgFlags for SenseBufferAddressSpace */
+#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
+#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
+#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
+#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08)
+
+/*SCSI IO SGLFlags bits */
+
+/*base values for Data Location Address Space */
+#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
+#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
+
+/*base values for Type */
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
+
+/*shift values for each sub-field */
+#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
+#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
+#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
+#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
+
+/*number of SGLOffset fields */
+#define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
+
+/*SCSI IO IoFlags bits */
+
+/*Large CDB Address Space */
+#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
+#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
+
+#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
+#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
+#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
+#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
+#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
+
+/*SCSI IO EEDPFlags bits */
+
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
+
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
+
+#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
+
+#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
+#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
+#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
+#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
+#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
+
+/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
+
+/*SCSI IO Control bits */
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
+
+#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
+#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
+#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
+#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
+#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
+#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
+
+#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
+#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
+/*alternate name for the previous field; called Command Priority in SAM-4 */
+#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800)
+#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11)
+
+#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
+#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
+#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
+#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
+#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
+
+#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
+#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
+#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
+#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
+
+/*MPI v2.5 CDB field */
+typedef union _MPI25_SCSI_IO_CDB_UNION {
+ U8 CDB32[32];
+ MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+ MPI2_IEEE_SGE_SIMPLE64 SGE;
+} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
+ Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
+
+/*MPI v2.5/2.6 SCSI IO Request Message */
+typedef struct _MPI25_SCSI_IO_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U32 SenseBufferLowAddress; /*0x0C */
+ U8 DMAFlags; /*0x10 */
+ U8 Reserved5; /*0x11 */
+ U8 SenseBufferLength; /*0x12 */
+ U8 Reserved4; /*0x13 */
+ U8 SGLOffset0; /*0x14 */
+ U8 SGLOffset1; /*0x15 */
+ U8 SGLOffset2; /*0x16 */
+ U8 SGLOffset3; /*0x17 */
+ U32 SkipCount; /*0x18 */
+ U32 DataLength; /*0x1C */
+ U32 BidirectionalDataLength; /*0x20 */
+ U16 IoFlags; /*0x24 */
+ U16 EEDPFlags; /*0x26 */
+ U16 EEDPBlockSize; /*0x28 */
+ U16 Reserved6; /*0x2A */
+ U32 SecondaryReferenceTag; /*0x2C */
+ U16 SecondaryApplicationTag; /*0x30 */
+ U16 ApplicationTagTranslationMask; /*0x32 */
+ U8 LUN[8]; /*0x34 */
+ U32 Control; /*0x3C */
+ MPI25_SCSI_IO_CDB_UNION CDB; /*0x40 */
+
+#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+ MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+ MPI25_SGE_IO_UNION SGL; /*0x60 */
+
+} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST,
+ Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t;
+
+/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */
+
+/*Defines for the DMAFlags field
+ * Each setting affects 4 SGLS, from SGL0 to SGL3.
+ * D = Data
+ * C = Cache DIF
+ * I = Interleaved
+ * H = Host DIF
+ */
+#define MPI25_SCSIIO_DMAFLAGS_OP_MASK (0x0F)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D (0x00)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C (0x01)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I (0x02)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C (0x03)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I (0x04)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I (0x05)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C (0x06)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I (0x07)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I (0x08)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I (0x09)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D (0x0A)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C (0x0B)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I (0x0C)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C (0x0D)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I (0x0E)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I (0x0F)
+
+/*number of SGLOffset fields */
+#define MPI25_SCSIIO_NUM_SGLOFFSETS (4)
+
+/*defines for the IoFlags field */
+#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK (0xC000)
+#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000)
+#define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000)
+
+#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000)
+#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
+#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
+#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400)
+#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
+
+/*MPI v2.5 defines for the EEDPFlags bits */
+/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */
+#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0)
+#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0)
+
+#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030)
+#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010)
+
+/*use MPI2_LUN_ defines from mpi2.h for the LUN field */
+
+/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */
+
+/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so
+ * MPI2_SCSI_IO_REPLY is used for both.
+ */
+
+/*SCSI IO Error Reply Message */
+typedef struct _MPI2_SCSI_IO_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U8 SCSIStatus; /*0x0C */
+ U8 SCSIState; /*0x0D */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 TransferCount; /*0x14 */
+ U32 SenseCount; /*0x18 */
+ U32 ResponseInfo; /*0x1C */
+ U16 TaskTag; /*0x20 */
+ U16 SCSIStatusQualifier; /* 0x22 */
+ U32 BidirectionalTransferCount; /*0x24 */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U32 EEDPErrorOffset; /* 0x28 */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U16 EEDPObservedAppTag; /* 0x2C */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U16 EEDPObservedGuard; /* 0x2E */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U32 EEDPObservedRefTag; /* 0x30 */
+} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
+ Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
+
+/*SCSI IO Reply MsgFlags bits */
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04)
+
+/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
+
+#define MPI2_SCSI_STATUS_GOOD (0x00)
+#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
+#define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
+#define MPI2_SCSI_STATUS_BUSY (0x08)
+#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
+#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
+#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
+#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /*obsolete */
+#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
+#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
+#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
+
+/*SCSI IO Reply SCSIState flags */
+
+#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
+#define MPI2_SCSI_STATE_TERMINATED (0x08)
+#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
+#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
+#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
+#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
+
+#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
+
+/****************************************************************************
+* SCSI Task Management messages
+****************************************************************************/
+
+/*SCSI Task Management Request Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Reserved1; /*0x04 */
+ U8 TaskType; /*0x05 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U8 LUN[8]; /*0x0C */
+ U32 Reserved4[7]; /*0x14 */
+ U16 TaskMID; /*0x30 */
+ U16 Reserved5; /*0x32 */
+} MPI2_SCSI_TASK_MANAGE_REQUEST,
+ *PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
+ Mpi2SCSITaskManagementRequest_t,
+ *pMpi2SCSITaskManagementRequest_t;
+
+/*TaskType values */
+
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
+#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
+#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
+
+/*obsolete TaskType name */
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
+ (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
+
+/*MsgFlags bits */
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
+
+/*SCSI Task Management Reply Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 ResponseCode; /*0x04 */
+ U8 TaskType; /*0x05 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 TerminationCount; /*0x14 */
+ U32 ResponseInfo; /*0x18 */
+} MPI2_SCSI_TASK_MANAGE_REPLY,
+ *PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
+ Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t;
+
+/*ResponseCode values */
+
+#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
+#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
+#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
+#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
+#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
+#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
+#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
+#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
+
+/****************************************************************************
+* SCSI Enclosure Processor messages
+****************************************************************************/
+
+/*SCSI Enclosure Processor Request Message */
+typedef struct _MPI2_SEP_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Action; /*0x04 */
+ U8 Flags; /*0x05 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 SlotStatus; /*0x0C */
+ U32 Reserved3; /*0x10 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+ U16 Slot; /*0x1C */
+ U16 EnclosureHandle; /*0x1E */
+} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST,
+ Mpi2SepRequest_t, *pMpi2SepRequest_t;
+
+/*Action defines */
+#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
+#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
+
+/*Flags defines */
+#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
+#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
+
+/*SlotStatus defines */
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000)
+#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
+#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
+#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
+#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
+#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
+#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
+
+/*SCSI Enclosure Processor Reply Message */
+typedef struct _MPI2_SEP_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Action; /*0x04 */
+ U8 Flags; /*0x05 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 SlotStatus; /*0x14 */
+ U32 Reserved4; /*0x18 */
+ U16 Slot; /*0x1C */
+ U16 EnclosureHandle; /*0x1E */
+} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY,
+ Mpi2SepReply_t, *pMpi2SepReply_t;
+
+/*SlotStatus defines */
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
+#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
+#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
+#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
new file mode 100644
index 0000000..1faec3a
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -0,0 +1,2142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_ioc.h
+ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
+ * Creation Date: October 11, 2006
+ *
+ * mpi2_ioc.h Version: 02.00.34
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
+ * MaxTargets.
+ * Added TotalImageSize field to FWDownload Request.
+ * Added reserved words to FWUpload Request.
+ * 06-26-07 02.00.02 Added IR Configuration Change List Event.
+ * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
+ * request and replaced it with
+ * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ * Replaced the MinReplyQueueDepth field of the IOCFacts
+ * reply with MaxReplyDescriptorPostQueueDepth.
+ * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ * depth for the Reply Descriptor Post Queue.
+ * Added SASAddress field to Initiator Device Table
+ * Overflow Event data.
+ * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ * for SAS Initiator Device Status Change Event data.
+ * Modified Reason Code defines for SAS Topology Change
+ * List Event data, including adding a bit for PHY Vacant
+ * status, and adding a mask for the Reason Code.
+ * Added define for
+ * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
+ * the IOCFacts Reply.
+ * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Moved MPI2_VERSION_UNION to mpi2.h.
+ * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ * instead of enables, and added SASBroadcastPrimitiveMasks
+ * field.
+ * Added Log Entry Added Event and related structure.
+ * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ * Added MaxVolumes and MaxPersistentEntries fields to
+ * IOCFacts reply.
+ * Added ProtocalFlags and IOCCapabilities fields to
+ * MPI2_FW_IMAGE_HEADER.
+ * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ * a U16 (from a U32).
+ * Removed extra 's' from EventMasks name.
+ * 06-27-08 02.00.08 Fixed an offset in a comment.
+ * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ * renamed MinReplyFrameSize to ReplyFrameSize.
+ * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ * Added two new RAIDOperation values for Integrated RAID
+ * Operations Status Event data.
+ * Added four new IR Configuration Change List Event data
+ * ReasonCode values.
+ * Added two new ReasonCode defines for SAS Device Status
+ * Change Event data.
+ * Added three new DiscoveryStatus bits for the SAS
+ * Discovery event data.
+ * Added Multiplexing Status Change bit to the PhyStatus
+ * field of the SAS Topology Change List event data.
+ * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ * BootFlags are now product-specific.
+ * Added defines for the indivdual signature bytes
+ * for MPI2_INIT_IMAGE_FOOTER.
+ * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ * define.
+ * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ * define.
+ * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ * Added two new reason codes for SAS Device Status Change
+ * Event.
+ * Added new event: SAS PHY Counter.
+ * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
+ * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Added new product id family for 2208.
+ * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ * Added Host Based Discovery Phy Event data.
+ * Added defines for ProductID Product field
+ * (MPI2_FW_HEADER_PID_).
+ * Modified values for SAS ProductID Family
+ * (MPI2_FW_HEADER_PID_FAMILY_).
+ * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
+ * Added PowerManagementControl Request structures and
+ * defines.
+ * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
+ * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
+ * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
+ * SASNotifyPrimitiveMasks field to
+ * MPI2_EVENT_NOTIFICATION_REQUEST.
+ * Added Temperature Threshold Event.
+ * Added Host Message Event.
+ * Added Send Host Message request and reply.
+ * 05-25-11 02.00.18 For Extended Image Header, added
+ * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
+ * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
+ * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
+ * 08-24-11 02.00.19 Added PhysicalPort field to
+ * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
+ * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
+ * 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
+ * 03-29-12 02.00.21 Added a product specific range to event values.
+ * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
+ * Added ElapsedSeconds field to
+ * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
+ * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
+ * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
+ * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
+ * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
+ * Added Encrypted Hash Extended Image.
+ * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
+ * 11-18-14 02.00.25 Updated copyright information.
+ * 03-16-15 02.00.26 Updated for MPI v2.6.
+ * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
+ * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
+ * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
+ * MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
+ * Added MPI26_CTRL_OP_SHUTDOWN.
+ * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
+ * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
+ * Added ConigurationFlags field to IOCInit message to
+ * support NVMe SGL format control.
+ * Added PCIe SRIOV support.
+ * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.29 Added Archclass for 4008 product.
+ * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
+ * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
+ * Request Message.
+ * Added new defines for the ImageType field of FWUpload
+ * Request Message.
+ * Added new values for the RegionType field in the Layout
+ * Data sections of the FLASH Layout Extended Image Data.
+ * Added new defines for the ReasonCode field of
+ * Active Cable Exception Event.
+ * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
+ * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
+ * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
+ * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
+ * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
+ * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
+ * defines for the ReasonCode field.
+ * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD.
+ * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED
+ * to the ReasonCode field in PCIe Device Status Change
+ * Event Data.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_IOC_H
+#define MPI2_IOC_H
+
+/*****************************************************************************
+*
+* IOC Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IOCInit message
+****************************************************************************/
+
+/*IOCInit Request message */
+typedef struct _MPI2_IOC_INIT_REQUEST {
+ U8 WhoInit; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 MsgVersion; /*0x0C */
+ U16 HeaderVersion; /*0x0E */
+ U32 Reserved5; /*0x10 */
+ U16 ConfigurationFlags; /* 0x14 */
+ U8 HostPageSize; /*0x16 */
+ U8 HostMSIxVectors; /*0x17 */
+ U16 Reserved8; /*0x18 */
+ U16 SystemRequestFrameSize; /*0x1A */
+ U16 ReplyDescriptorPostQueueDepth; /*0x1C */
+ U16 ReplyFreeQueueDepth; /*0x1E */
+ U32 SenseBufferAddressHigh; /*0x20 */
+ U32 SystemReplyAddressHigh; /*0x24 */
+ U64 SystemRequestFrameBaseAddress; /*0x28 */
+ U64 ReplyDescriptorPostQueueAddress; /*0x30 */
+ U64 ReplyFreeQueueAddress; /*0x38 */
+ U64 TimeStamp; /*0x40 */
+} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
+ Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
+
+/*WhoInit values */
+#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
+#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
+#define MPI2_WHOINIT_ROM_BIOS (0x02)
+#define MPI2_WHOINIT_PCI_PEER (0x03)
+#define MPI2_WHOINIT_HOST_DRIVER (0x04)
+#define MPI2_WHOINIT_MANUFACTURER (0x05)
+
+/* MsgFlags */
+#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
+
+
+/*MsgVersion */
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
+
+/*HeaderVersion */
+#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
+#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
+#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
+#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
+
+/*ConfigurationFlags */
+#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
+
+/*minimum depth for a Reply Descriptor Post Queue */
+#define MPI2_RDPQ_DEPTH_MIN (16)
+
+/* Reply Descriptor Post Queue Array Entry */
+typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
+ U64 RDPQBaseAddress; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
+
+
+/*IOCInit Reply message */
+typedef struct _MPI2_IOC_INIT_REPLY {
+ U8 WhoInit; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
+ Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
+
+/****************************************************************************
+* IOCFacts message
+****************************************************************************/
+
+/*IOCFacts Request message */
+typedef struct _MPI2_IOC_FACTS_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
+ Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
+
+/*IOCFacts Reply message */
+typedef struct _MPI2_IOC_FACTS_REPLY {
+ U16 MsgVersion; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 HeaderVersion; /*0x04 */
+ U8 IOCNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U16 IOCExceptions; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 MaxChainDepth; /*0x14 */
+ U8 WhoInit; /*0x15 */
+ U8 NumberOfPorts; /*0x16 */
+ U8 MaxMSIxVectors; /*0x17 */
+ U16 RequestCredit; /*0x18 */
+ U16 ProductID; /*0x1A */
+ U32 IOCCapabilities; /*0x1C */
+ MPI2_VERSION_UNION FWVersion; /*0x20 */
+ U16 IOCRequestFrameSize; /*0x24 */
+ U16 IOCMaxChainSegmentSize; /*0x26 */
+ U16 MaxInitiators; /*0x28 */
+ U16 MaxTargets; /*0x2A */
+ U16 MaxSasExpanders; /*0x2C */
+ U16 MaxEnclosures; /*0x2E */
+ U16 ProtocolFlags; /*0x30 */
+ U16 HighPriorityCredit; /*0x32 */
+ U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */
+ U8 ReplyFrameSize; /*0x36 */
+ U8 MaxVolumes; /*0x37 */
+ U16 MaxDevHandle; /*0x38 */
+ U16 MaxPersistentEntries; /*0x3A */
+ U16 MinDevHandle; /*0x3C */
+ U8 CurrentHostPageSize; /* 0x3E */
+ U8 Reserved4; /* 0x3F */
+ U8 SGEModifierMask; /*0x40 */
+ U8 SGEModifierValue; /*0x41 */
+ U8 SGEModifierShift; /*0x42 */
+ U8 Reserved5; /*0x43 */
+} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
+ Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
+
+/*MsgVersion */
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
+
+/*HeaderVersion */
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
+
+/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
+#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
+#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
+
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
+
+#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
+#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
+#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
+#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
+#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
+
+/*defines for WhoInit field are after the IOCInit Request */
+
+/*ProductID field uses MPI2_FW_HEADER_PID_ */
+
+/*IOCCapabilities */
+#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
+#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
+#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
+#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
+#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
+#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
+#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
+#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
+#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
+#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
+#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
+#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
+#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
+#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
+
+/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
+
+/****************************************************************************
+* PortFacts message
+****************************************************************************/
+
+/*PortFacts Request message */
+typedef struct _MPI2_PORT_FACTS_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 PortNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
+ Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
+
+/*PortFacts Reply message */
+typedef struct _MPI2_PORT_FACTS_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 PortNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 Reserved5; /*0x14 */
+ U8 PortType; /*0x15 */
+ U16 Reserved6; /*0x16 */
+ U16 MaxPostedCmdBuffers; /*0x18 */
+ U16 Reserved7; /*0x1A */
+} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
+ Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
+
+/*PortType values */
+#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
+#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
+#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
+#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40)
+
+
+/****************************************************************************
+* PortEnable message
+****************************************************************************/
+
+/*PortEnable Request message */
+typedef struct _MPI2_PORT_ENABLE_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Reserved2; /*0x04 */
+ U8 PortFlags; /*0x05 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
+ Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
+
+/*PortEnable Reply message */
+typedef struct _MPI2_PORT_ENABLE_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Reserved2; /*0x04 */
+ U8 PortFlags; /*0x05 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
+ Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
+
+/****************************************************************************
+* EventNotification message
+****************************************************************************/
+
+/*EventNotification Request message */
+#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
+
+typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */
+ U16 SASBroadcastPrimitiveMasks; /*0x24 */
+ U16 SASNotifyPrimitiveMasks; /*0x26 */
+ U32 Reserved8; /*0x28 */
+} MPI2_EVENT_NOTIFICATION_REQUEST,
+ *PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
+ Mpi2EventNotificationRequest_t,
+ *pMpi2EventNotificationRequest_t;
+
+/*EventNotification Reply message */
+typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
+ U16 EventDataLength; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 AckRequired; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 Event; /*0x14 */
+ U16 Reserved4; /*0x16 */
+ U32 EventContext; /*0x18 */
+ U32 EventData[1]; /*0x1C */
+} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
+ Mpi2EventNotificationReply_t,
+ *pMpi2EventNotificationReply_t;
+
+/*AckRequired */
+#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
+#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
+
+/*Event */
+#define MPI2_EVENT_LOG_DATA (0x0001)
+#define MPI2_EVENT_STATE_CHANGE (0x0002)
+#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
+#define MPI2_EVENT_EVENT_CHANGE (0x000A)
+#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */
+#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
+#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
+#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
+#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
+#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
+#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
+#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
+#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
+#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D)
+#define MPI2_EVENT_IR_VOLUME (0x001E)
+#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
+#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
+#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
+#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
+#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE (0x0028)
+#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
+#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030)
+#define MPI2_EVENT_PCIE_ENUMERATION (0x0031)
+#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032)
+#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033)
+#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
+#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035)
+#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
+#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
+
+/*Log Entry Added Event data */
+
+/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
+#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
+
+typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U16 LogSequence; /*0x0C */
+ U16 LogEntryQualifier; /*0x0E */
+ U8 VP_ID; /*0x10 */
+ U8 VF_ID; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */
+} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+ *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+ Mpi2EventDataLogEntryAdded_t,
+ *pMpi2EventDataLogEntryAdded_t;
+
+/*GPIO Interrupt Event data */
+
+typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
+ U8 GPIONum; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ Mpi2EventDataGpioInterrupt_t,
+ *pMpi2EventDataGpioInterrupt_t;
+
+/*Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+ U16 Status; /*0x00 */
+ U8 SensorNum; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U16 CurrentTemperature; /*0x04 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+ *PTR_MPI2_EVENT_DATA_TEMPERATURE,
+ Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
+
+/*Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
+
+/*Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+ U8 SourceVF_ID; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+ U32 HostData[1]; /*0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+ Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
+
+/*Power Performance Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
+ U8 CurrentPowerMode; /*0x00 */
+ U8 PreviousPowerMode; /*0x01 */
+ U16 Reserved1; /*0x02 */
+} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+ *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+ Mpi2EventDataPowerPerfChange_t,
+ *pMpi2EventDataPowerPerfChange_t;
+
+/*defines for CurrentPowerMode and PreviousPowerMode fields */
+#define MPI2_EVENT_PM_INIT_MASK (0xC0)
+#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00)
+#define MPI2_EVENT_PM_INIT_HOST (0x40)
+#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80)
+#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0)
+
+#define MPI2_EVENT_PM_MODE_MASK (0x07)
+#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00)
+#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01)
+#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04)
+#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
+#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
+
+/* Active Cable Exception Event data */
+
+typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
+ U32 ActiveCablePowerRequirement; /* 0x00 */
+ U8 ReasonCode; /* 0x04 */
+ U8 ReceptacleID; /* 0x05 */
+ U16 Reserved1; /* 0x06 */
+} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ Mpi25EventDataActiveCableExcept_t,
+ *pMpi25EventDataActiveCableExcept_t,
+ MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ Mpi26EventDataActiveCableExcept_t,
+ *pMpi26EventDataActiveCableExcept_t;
+
+/*MPI2.5 defines for the ReasonCode field */
+#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
+
+/* defines for ReasonCode field */
+#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
+
+/*Hard Reset Received Event data */
+
+typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
+ U8 Reserved1; /*0x00 */
+ U8 Port; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+ *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+ Mpi2EventDataHardResetReceived_t,
+ *pMpi2EventDataHardResetReceived_t;
+
+/*Task Set Full Event data */
+/* this event is obsolete */
+
+typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
+ U16 DevHandle; /*0x00 */
+ U16 CurrentDepth; /*0x02 */
+} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
+ Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
+
+/*SAS Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
+ U16 TaskTag; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U8 ASC; /*0x04 */
+ U8 ASCQ; /*0x05 */
+ U16 DevHandle; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ U64 SASAddress; /*0x0C */
+ U8 LUN[8]; /*0x14 */
+} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ Mpi2EventDataSasDeviceStatusChange_t,
+ *pMpi2EventDataSasDeviceStatusChange_t;
+
+/*SAS Device Status Change Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
+
+/*Integrated RAID Operation Status Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
+ U16 VolDevHandle; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U8 RAIDOperation; /*0x04 */
+ U8 PercentComplete; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 ElapsedSeconds; /*0x08 */
+} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+ *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+ Mpi2EventDataIrOperationStatus_t,
+ *pMpi2EventDataIrOperationStatus_t;
+
+/*Integrated RAID Operation Status Event data RAIDOperation values */
+#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
+#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
+#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
+#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
+
+/*Integrated RAID Volume Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
+ U16 VolDevHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 NewValue; /*0x04 */
+ U32 PreviousValue; /*0x08 */
+} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
+ Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
+
+/*Integrated RAID Volume Event data ReasonCode values */
+#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
+#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
+#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
+
+/*Integrated RAID Physical Disk Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
+ U16 Reserved1; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysDiskNum; /*0x03 */
+ U16 PhysDiskDevHandle; /*0x04 */
+ U16 Reserved2; /*0x06 */
+ U16 Slot; /*0x08 */
+ U16 EnclosureHandle; /*0x0A */
+ U32 NewValue; /*0x0C */
+ U32 PreviousValue; /*0x10 */
+} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+ *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+ Mpi2EventDataIrPhysicalDisk_t,
+ *pMpi2EventDataIrPhysicalDisk_t;
+
+/*Integrated RAID Physical Disk Event data ReasonCode values */
+#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
+
+/*Integrated RAID Configuration Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumElements at runtime.
+ */
+#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
+#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
+#endif
+
+typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
+ U16 ElementFlags; /*0x00 */
+ U16 VolDevHandle; /*0x02 */
+ U8 ReasonCode; /*0x04 */
+ U8 PhysDiskNum; /*0x05 */
+ U16 PhysDiskDevHandle; /*0x06 */
+} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
+ Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
+
+/*IR Configuration Change List Event data ElementFlags values */
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
+
+/*IR Configuration Change List Event data ReasonCode values */
+#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
+#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
+#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
+#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
+#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
+
+typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
+ U8 NumElements; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 Reserved2; /*0x02 */
+ U8 ConfigNum; /*0x03 */
+ U32 Flags; /*0x04 */
+ MPI2_EVENT_IR_CONFIG_ELEMENT
+ ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
+} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+ *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+ Mpi2EventDataIrConfigChangeList_t,
+ *pMpi2EventDataIrConfigChangeList_t;
+
+/*IR Configuration Change List Event data Flags values */
+#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
+
+/*SAS Discovery Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
+ U8 Flags; /*0x00 */
+ U8 ReasonCode; /*0x01 */
+ U8 PhysicalPort; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 DiscoveryStatus; /*0x04 */
+} MPI2_EVENT_DATA_SAS_DISCOVERY,
+ *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
+ Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
+
+/*SAS Discovery Event data Flags values */
+#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
+#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
+
+/*SAS Discovery Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
+#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
+
+/*SAS Discovery Event data DiscoveryStatus values */
+#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
+#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
+#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
+#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
+
+/*SAS Broadcast Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
+ U8 PhyNum; /*0x00 */
+ U8 Port; /*0x01 */
+ U8 PortWidth; /*0x02 */
+ U8 Primitive; /*0x03 */
+} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+ *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+ Mpi2EventDataSasBroadcastPrimitive_t,
+ *pMpi2EventDataSasBroadcastPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
+#define MPI2_EVENT_PRIMITIVE_SES (0x02)
+#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
+#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
+#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
+#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
+#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
+#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
+
+/*SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+ U8 PhyNum; /*0x00 */
+ U8 Port; /*0x01 */
+ U8 Reserved1; /*0x02 */
+ U8 Primitive; /*0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+ *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+ Mpi2EventDataSasNotifyPrimitive_t,
+ *pMpi2EventDataSasNotifyPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
+
+/*SAS Initiator Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
+ U8 ReasonCode; /*0x00 */
+ U8 PhysicalPort; /*0x01 */
+ U16 DevHandle; /*0x02 */
+ U64 SASAddress; /*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+ Mpi2EventDataSasInitDevStatusChange_t,
+ *pMpi2EventDataSasInitDevStatusChange_t;
+
+/*SAS Initiator Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
+
+/*SAS Initiator Device Table Overflow Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
+ U16 MaxInit; /*0x00 */
+ U16 CurrentInit; /*0x02 */
+ U64 SASAddress; /*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+ *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+ Mpi2EventDataSasInitTableOverflow_t,
+ *pMpi2EventDataSasInitTableOverflow_t;
+
+/*SAS Topology Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
+#endif
+
+typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
+ U16 AttachedDevHandle; /*0x00 */
+ U8 LinkRate; /*0x02 */
+ U8 PhyStatus; /*0x03 */
+} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
+ Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
+
+typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
+ U16 EnclosureHandle; /*0x00 */
+ U16 ExpanderDevHandle; /*0x02 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U8 NumEntries; /*0x08 */
+ U8 StartPhyNum; /*0x09 */
+ U8 ExpStatus; /*0x0A */
+ U8 PhysicalPort; /*0x0B */
+ MPI2_EVENT_SAS_TOPO_PHY_ENTRY
+ PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */
+} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+ *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+ Mpi2EventDataSasTopologyChangeList_t,
+ *pMpi2EventDataSasTopologyChangeList_t;
+
+/*values for the ExpStatus field */
+#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
+#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
+#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
+#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
+#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
+
+/*defines for the LinkRate field */
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
+
+#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
+#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
+#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
+#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
+#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
+#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
+#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
+#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
+
+/*values for the PhyStatus field */
+#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
+#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
+/*values for the PhyStatus ReasonCode sub-field */
+#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
+#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
+#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
+#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
+
+/*SAS Enclosure Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
+ U16 EnclosureHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U64 EnclosureLogicalID; /*0x04 */
+ U16 NumSlots; /*0x0C */
+ U16 StartSlot; /*0x0E */
+ U32 PhyBits; /*0x10 */
+} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+ Mpi2EventDataSasEnclDevStatusChange_t,
+ *pMpi2EventDataSasEnclDevStatusChange_t,
+ MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ Mpi26EventDataEnclDevStatusChange_t,
+ *pMpi26EventDataEnclDevStatusChange_t;
+
+/*SAS Enclosure Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
+#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
+
+/*Enclosure Device Status Change event ReasonCode values */
+#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
+#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
+
+
+typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
+ U16 DevHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U32 Reserved1[2]; /*0x04 */
+ U64 SASAddress; /*0x0C */
+ U32 Reserved2[2]; /*0x14 */
+} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ Mpi25EventDataSasDeviceDiscoveryError_t,
+ *pMpi25EventDataSasDeviceDiscoveryError_t;
+
+/*SAS Device Discovery Error Event data ReasonCode values */
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
+
+/*SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 PhyEventCode; /*0x0C */
+ U8 PhyNum; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 PhyEventInfo; /*0x10 */
+ U8 CounterType; /*0x14 */
+ U8 ThresholdWindow; /*0x15 */
+ U8 TimeUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 EventThreshold; /*0x18 */
+ U16 ThresholdFlags; /*0x1C */
+ U16 Reserved4; /*0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ Mpi2EventDataSasPhyCounter_t,
+ *pMpi2EventDataSasPhyCounter_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
+ *for the PhyEventCode field */
+
+/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
+ *for the CounterType field */
+
+/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
+ *for the TimeUnits field */
+
+/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
+ *for the ThresholdFlags field */
+
+/*SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+ U8 ReasonCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+ *PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+ Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
+
+/*SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
+
+/*Host Based Discovery Phy Event data */
+
+typedef struct _MPI2_EVENT_HBD_PHY_SAS {
+ U8 Flags; /*0x00 */
+ U8 NegotiatedLinkRate; /*0x01 */
+ U8 PhyNum; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U32 Reserved1; /*0x04 */
+ U8 InitialFrame[28]; /*0x08 */
+} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
+ Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
+
+/*values for the Flags field */
+#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
+#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
+ *for the NegotiatedLinkRate field */
+
+typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
+ MPI2_EVENT_HBD_PHY_SAS Sas;
+} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
+ Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
+
+typedef struct _MPI2_EVENT_DATA_HBD_PHY {
+ U8 DescriptorType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */
+} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
+ Mpi2EventDataHbdPhy_t,
+ *pMpi2EventDataMpi2EventDataHbdPhy_t;
+
+/*values for the DescriptorType field */
+#define MPI2_EVENT_HBD_DT_SAS (0x01)
+
+
+/*PCIe Device Status Change Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
+ U16 TaskTag; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U8 ASC; /*0x04 */
+ U8 ASCQ; /*0x05 */
+ U16 DevHandle; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ U64 WWID; /*0x0C */
+ U8 LUN[8]; /*0x14 */
+} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ Mpi26EventDataPCIeDeviceStatusChange_t,
+ *pMpi26EventDataPCIeDeviceStatusChange_t;
+
+/*PCIe Device Status Change Event data ReasonCode values */
+#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
+#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
+#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11)
+
+
+/*PCIe Enumeration Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
+ U8 Flags; /*0x00 */
+ U8 ReasonCode; /*0x01 */
+ U8 PhysicalPort; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 EnumerationStatus; /*0x04 */
+} MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ Mpi26EventDataPCIeEnumeration_t,
+ *pMpi26EventDataPCIeEnumeration_t;
+
+/*PCIe Enumeration Event data Flags values */
+#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
+#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
+
+/*PCIe Enumeration Event data ReasonCode values */
+#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
+#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
+
+/*PCIe Enumeration Event data EnumerationStatus values */
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
+
+
+/*PCIe Topology Change List Event data (MPI v2.6 and later) */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
+#endif
+
+typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
+ U16 AttachedDevHandle; /*0x00 */
+ U8 PortStatus; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U8 CurrentPortInfo; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U8 PreviousPortInfo; /*0x06 */
+ U8 Reserved3; /*0x07 */
+} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ Mpi26EventPCIeTopoPortEntry_t,
+ *pMpi26EventPCIeTopoPortEntry_t;
+
+/*PCIe Topology Change List Event data PortStatus values */
+#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
+
+/*PCIe Topology Change List Event data defines for CurrentPortInfo and
+ *PreviousPortInfo
+ */
+#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
+#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
+#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
+#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
+#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
+
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
+
+typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
+ U16 EnclosureHandle; /*0x00 */
+ U16 SwitchDevHandle; /*0x02 */
+ U8 NumPorts; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U8 NumEntries; /*0x08 */
+ U8 StartPortNum; /*0x09 */
+ U8 SwitchStatus; /*0x0A */
+ U8 PhysicalPort; /*0x0B */
+ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
+ PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
+} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ Mpi26EventDataPCIeTopologyChangeList_t,
+ *pMpi26EventDataPCIeTopologyChangeList_t;
+
+/*PCIe Topology Change List Event data SwitchStatus values */
+#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
+#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
+#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
+
+/*PCIe Link Counter Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 LinkEventCode; /*0x0C */
+ U8 LinkNum; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 LinkEventInfo; /*0x10 */
+ U8 CounterType; /*0x14 */
+ U8 ThresholdWindow; /*0x15 */
+ U8 TimeUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 EventThreshold; /*0x18 */
+ U16 ThresholdFlags; /*0x1C */
+ U16 Reserved4; /*0x1E */
+} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
+
+
+/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
+ *field
+ */
+
+/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
+ *field
+ */
+
+/****************************************************************************
+* EventAck message
+****************************************************************************/
+
+/*EventAck Request message */
+typedef struct _MPI2_EVENT_ACK_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Event; /*0x0C */
+ U16 Reserved5; /*0x0E */
+ U32 EventContext; /*0x10 */
+} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
+ Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
+
+/*EventAck Reply message */
+typedef struct _MPI2_EVENT_ACK_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
+ Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
+
+/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/*SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+ U16 HostDataLength; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U8 Reserved4; /*0x0C */
+ U8 DestVF_ID; /*0x0D */
+ U16 Reserved5; /*0x0E */
+ U32 Reserved6; /*0x10 */
+ U32 Reserved7; /*0x14 */
+ U32 Reserved8; /*0x18 */
+ U32 Reserved9; /*0x1C */
+ U32 Reserved10; /*0x20 */
+ U32 HostData[1]; /*0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+ *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+ Mpi2SendHostMessageRequest_t,
+ *pMpi2SendHostMessageRequest_t;
+
+/*SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+ U16 HostDataLength; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+ Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
+
+/****************************************************************************
+* FWDownload message
+****************************************************************************/
+
+/*MPI v2.0 FWDownload Request message */
+typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 TotalImageSize; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ MPI2_MPI_SGE_UNION SGL; /*0x14 */
+} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
+ Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
+
+#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
+
+#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
+#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
+#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
+#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
+#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
+#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
+
+/*MPI v2.0 FWDownload TransactionContext Element */
+typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
+ U8 Reserved1; /*0x00 */
+ U8 ContextSize; /*0x01 */
+ U8 DetailsLength; /*0x02 */
+ U8 Flags; /*0x03 */
+ U32 Reserved2; /*0x04 */
+ U32 ImageOffset; /*0x08 */
+ U32 ImageSize; /*0x0C */
+} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
+ Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
+
+/*MPI v2.5 FWDownload Request message */
+typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 TotalImageSize; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+ U32 ImageOffset; /*0x18 */
+ U32 ImageSize; /*0x1C */
+ MPI25_SGE_IO_UNION SGL; /*0x20 */
+} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
+ Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
+
+/*FWDownload Reply message */
+typedef struct _MPI2_FW_DOWNLOAD_REPLY {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
+ Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
+
+/****************************************************************************
+* FWUpload message
+****************************************************************************/
+
+/*MPI v2.0 FWUpload Request message */
+typedef struct _MPI2_FW_UPLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ MPI2_MPI_SGE_UNION SGL; /*0x14 */
+} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
+ Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
+
+#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
+#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
+#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
+#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
+#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
+#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
+#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
+#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
+
+
+/*MPI v2.0 FWUpload TransactionContext Element */
+typedef struct _MPI2_FW_UPLOAD_TCSGE {
+ U8 Reserved1; /*0x00 */
+ U8 ContextSize; /*0x01 */
+ U8 DetailsLength; /*0x02 */
+ U8 Flags; /*0x03 */
+ U32 Reserved2; /*0x04 */
+ U32 ImageOffset; /*0x08 */
+ U32 ImageSize; /*0x0C */
+} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
+ Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
+
+/*MPI v2.5 FWUpload Request message */
+typedef struct _MPI25_FW_UPLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ U32 Reserved7; /*0x14 */
+ U32 ImageOffset; /*0x18 */
+ U32 ImageSize; /*0x1C */
+ MPI25_SGE_IO_UNION SGL; /*0x20 */
+} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
+ Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
+
+/*FWUpload Reply message */
+typedef struct _MPI2_FW_UPLOAD_REPLY {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 ActualImageSize; /*0x14 */
+} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
+ Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
+
+/*FW Image Header */
+typedef struct _MPI2_FW_IMAGE_HEADER {
+ U32 Signature; /*0x00 */
+ U32 Signature0; /*0x04 */
+ U32 Signature1; /*0x08 */
+ U32 Signature2; /*0x0C */
+ MPI2_VERSION_UNION MPIVersion; /*0x10 */
+ MPI2_VERSION_UNION FWVersion; /*0x14 */
+ MPI2_VERSION_UNION NVDATAVersion; /*0x18 */
+ MPI2_VERSION_UNION PackageVersion; /*0x1C */
+ U16 VendorID; /*0x20 */
+ U16 ProductID; /*0x22 */
+ U16 ProtocolFlags; /*0x24 */
+ U16 Reserved26; /*0x26 */
+ U32 IOCCapabilities; /*0x28 */
+ U32 ImageSize; /*0x2C */
+ U32 NextImageHeaderOffset; /*0x30 */
+ U32 Checksum; /*0x34 */
+ U32 Reserved38; /*0x38 */
+ U32 Reserved3C; /*0x3C */
+ U32 Reserved40; /*0x40 */
+ U32 Reserved44; /*0x44 */
+ U32 Reserved48; /*0x48 */
+ U32 Reserved4C; /*0x4C */
+ U32 Reserved50; /*0x50 */
+ U32 Reserved54; /*0x54 */
+ U32 Reserved58; /*0x58 */
+ U32 Reserved5C; /*0x5C */
+ U32 BootFlags; /*0x60 */
+ U32 FirmwareVersionNameWhat; /*0x64 */
+ U8 FirmwareVersionName[32]; /*0x68 */
+ U32 VendorNameWhat; /*0x88 */
+ U8 VendorName[32]; /*0x8C */
+ U32 PackageNameWhat; /*0x88 */
+ U8 PackageName[32]; /*0x8C */
+ U32 ReservedD0; /*0xD0 */
+ U32 ReservedD4; /*0xD4 */
+ U32 ReservedD8; /*0xD8 */
+ U32 ReservedDC; /*0xDC */
+ U32 ReservedE0; /*0xE0 */
+ U32 ReservedE4; /*0xE4 */
+ U32 ReservedE8; /*0xE8 */
+ U32 ReservedEC; /*0xEC */
+ U32 ReservedF0; /*0xF0 */
+ U32 ReservedF4; /*0xF4 */
+ U32 ReservedF8; /*0xF8 */
+ U32 ReservedFC; /*0xFC */
+} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
+ Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
+
+/*Signature field */
+#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
+#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
+#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
+#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
+
+/*Signature0 field */
+#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
+#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
+/* Last byte is defined by architecture */
+#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
+/* legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
+#define MPI26_FW_HEADER_SIGNATURE0 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
+#define MPI26_FW_HEADER_SIGNATURE0_3516 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
+#define MPI26_FW_HEADER_SIGNATURE0_4008 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
+
+/*Signature1 field */
+#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
+#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
+#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
+
+/*Signature2 field */
+#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
+#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
+#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
+
+/*defines for using the ProductID field */
+#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
+#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
+
+#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
+
+#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
+/*SAS ProductID Family bits */
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
+#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
+#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
+#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
+
+/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
+
+/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
+
+#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
+#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
+#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
+#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
+
+#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
+
+#define MPI2_FW_HEADER_SIZE (0x100)
+
+/*Extended Image Header */
+typedef struct _MPI2_EXT_IMAGE_HEADER {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Checksum; /*0x04 */
+ U32 ImageSize; /*0x08 */
+ U32 NextImageHeaderOffset; /*0x0C */
+ U32 PackageVersion; /*0x10 */
+ U32 Reserved3; /*0x14 */
+ U32 Reserved4; /*0x18 */
+ U32 Reserved5; /*0x1C */
+ U8 IdentifyString[32]; /*0x20 */
+} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
+ Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
+
+/*useful offsets */
+#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
+#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
+#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
+
+#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
+
+/*defines for the ImageType field */
+#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
+#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
+#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
+#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
+#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
+#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
+#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
+#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
+
+/*FLASH Layout Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check RegionsPerLayout at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
+#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
+#endif
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfLayouts at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
+#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
+#endif
+
+typedef struct _MPI2_FLASH_REGION {
+ U8 RegionType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 RegionOffset; /*0x04 */
+ U32 RegionSize; /*0x08 */
+ U32 Reserved3; /*0x0C */
+} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
+ Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
+
+typedef struct _MPI2_FLASH_LAYOUT {
+ U32 FlashSize; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
+} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
+ Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
+
+typedef struct _MPI2_FLASH_LAYOUT_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 SizeOfRegion; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U16 NumberOfLayouts; /*0x04 */
+ U16 RegionsPerLayout; /*0x06 */
+ U16 MinimumSectorAlignment; /*0x08 */
+ U16 Reserved3; /*0x0A */
+ U32 Reserved4; /*0x0C */
+ MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
+} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
+ Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
+
+/*defines for the RegionType field */
+#define MPI2_FLASH_REGION_UNUSED (0x00)
+#define MPI2_FLASH_REGION_FIRMWARE (0x01)
+#define MPI2_FLASH_REGION_BIOS (0x02)
+#define MPI2_FLASH_REGION_NVDATA (0x03)
+#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
+#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
+#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
+#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
+#define MPI2_FLASH_REGION_MEGARAID (0x09)
+#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
+#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
+#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
+#define MPI2_FLASH_REGION_SBR (0x0E)
+#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
+#define MPI2_FLASH_REGION_HIIM (0x10)
+#define MPI2_FLASH_REGION_HIIA (0x11)
+#define MPI2_FLASH_REGION_CTLR (0x12)
+#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
+#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
+
+/*ImageRevision */
+#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
+
+/*Supported Devices Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfDevices at runtime.
+ */
+#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
+#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
+#endif
+
+typedef struct _MPI2_SUPPORTED_DEVICE {
+ U16 DeviceID; /*0x00 */
+ U16 VendorID; /*0x02 */
+ U16 DeviceIDMask; /*0x04 */
+ U16 Reserved1; /*0x06 */
+ U8 LowPCIRev; /*0x08 */
+ U8 HighPCIRev; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
+ Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
+
+typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 NumberOfDevices; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U32 Reserved3; /*0x04 */
+ MPI2_SUPPORTED_DEVICE
+ SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
+ Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
+
+/*ImageRevision */
+#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
+
+/*Init Extended Image Data */
+
+typedef struct _MPI2_INIT_IMAGE_FOOTER {
+ U32 BootFlags; /*0x00 */
+ U32 ImageSize; /*0x04 */
+ U32 Signature0; /*0x08 */
+ U32 Signature1; /*0x0C */
+ U32 Signature2; /*0x10 */
+ U32 ResetVector; /*0x14 */
+} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
+ Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
+
+/*defines for the BootFlags field */
+#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
+
+/*defines for the ImageSize field */
+#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
+
+/*defines for the Signature0 field */
+#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
+#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
+
+/*defines for the Signature1 field */
+#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
+#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
+
+/*defines for the Signature2 field */
+#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
+#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
+
+/*Signature fields as individual bytes */
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
+
+/*defines for the ResetVector field */
+#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
+
+
+/* Encrypted Hash Extended Image Data */
+
+typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
+ U8 HashImageType; /* 0x00 */
+ U8 HashAlgorithm; /* 0x01 */
+ U8 EncryptionAlgorithm; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U32 Reserved2; /* 0x04 */
+ U32 EncryptedHash[1]; /* 0x08 */ /* variable length */
+} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
+Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
+
+/* values for HashImageType */
+#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
+#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
+
+/* values for HashAlgorithm */
+#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
+#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
+
+/* values for EncryptionAlgorithm */
+#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
+#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
+
+typedef struct _MPI25_ENCRYPTED_HASH_DATA {
+ U8 ImageVersion; /* 0x00 */
+ U8 NumHash; /* 0x01 */
+ U16 Reserved1; /* 0x02 */
+ U32 Reserved2; /* 0x04 */
+ MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
+} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
+Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
+
+
+/****************************************************************************
+* PowerManagementControl message
+****************************************************************************/
+
+/*PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+ U8 Feature; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 Parameter1; /*0x0C */
+ U8 Parameter2; /*0x0D */
+ U8 Parameter3; /*0x0E */
+ U8 Parameter4; /*0x0F */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+ Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
+
+/*defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/*Parameter1 contains a PHY number */
+/*Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ * Feature */
+/*Parameter1 contains SAS port width modulation group number */
+/*Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
+/*Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
+/*Parameter4 is reserved */
+
+/*this next set (_PCIE_LINK) is obsolete */
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/*Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */
+/*Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/*Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
+/*Parameter2, Parameter3, and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
+/*Parameter1 indicates host action regarding global power management mode */
+#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01)
+#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02)
+#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03)
+/*Parameter2 indicates the requested global power management mode */
+#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01)
+#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08)
+#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40)
+/*Parameter3 and Parameter4 are reserved */
+
+/*PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+ U8 Feature; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+ Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
+
+/****************************************************************************
+* IO Unit Control messages (MPI v2.6 and later only.)
+****************************************************************************/
+
+/* IO Unit Control Request Message */
+typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
+ U8 Operation; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 DevHandle; /* 0x04 */
+ U8 IOCParameter; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U16 Reserved4; /* 0x0C */
+ U8 PhyNum; /* 0x0E */
+ U8 PrimFlags; /* 0x0F */
+ U32 Primitive; /* 0x10 */
+ U8 LookupMethod; /* 0x14 */
+ U8 Reserved5; /* 0x15 */
+ U16 SlotNumber; /* 0x16 */
+ U64 LookupAddress; /* 0x18 */
+ U32 IOCParameterValue; /* 0x20 */
+ U32 Reserved7; /* 0x24 */
+ U32 Reserved8; /* 0x28 */
+} MPI26_IOUNIT_CONTROL_REQUEST,
+ *PTR_MPI26_IOUNIT_CONTROL_REQUEST,
+ Mpi26IoUnitControlRequest_t,
+ *pMpi26IoUnitControlRequest_t;
+
+/* values for the Operation field */
+#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02)
+#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
+#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
+#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
+#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09)
+#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
+#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
+#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
+#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E)
+#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F)
+#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10)
+#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11)
+#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12)
+#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13)
+#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14)
+#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15)
+#define MPI26_CTRL_OP_SHUTDOWN (0x16)
+#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
+#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
+#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
+#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
+#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
+#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
+
+/* values for the PrimFlags field */
+#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08)
+#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02)
+#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01)
+
+/* values for the LookupMethod field */
+#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
+#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
+#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
+
+
+/* IO Unit Control Reply Message */
+typedef struct _MPI26_IOUNIT_CONTROL_REPLY {
+ U8 Operation; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 DevHandle; /* 0x04 */
+ U8 IOCParameter; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U16 Reserved4; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+} MPI26_IOUNIT_CONTROL_REPLY,
+ *PTR_MPI26_IOUNIT_CONTROL_REPLY,
+ Mpi26IoUnitControlReply_t,
+ *pMpi26IoUnitControlReply_t;
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
new file mode 100644
index 0000000..f0281f9
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2012-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_pci.h
+ * Title: MPI PCIe Attached Devices structures and definitions.
+ * Creation Date: October 9, 2012
+ *
+ * mpi2_pci.h Version: 02.00.02
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 03-16-15 02.00.00 Initial version.
+ * 02-17-16 02.00.01 Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
+ * NVME Encapsulated Request.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_PCI_H
+#define MPI2_PCI_H
+
+
+/*
+ *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
+ *data and PCIe Configuration pages.
+ */
+#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010)
+
+#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F)
+#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000)
+#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001)
+#define MPI26_PCIE_DEVINFO_NVME (0x00000003)
+
+
+/****************************************************************************
+* NVMe Encapsulated message
+****************************************************************************/
+
+/*NVME Encapsulated Request Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+ U64 ErrorResponseBaseAddress; /*0x10 */
+ U16 ErrorResponseAllocationLength; /*0x18 */
+ U16 Flags; /*0x1A */
+ U32 DataLength; /*0x1C */
+ U8 NVMe_Command[4]; /*0x20 */
+
+} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
+ Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
+
+/*defines for the Flags field */
+#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020)
+/*Submission Queue Type*/
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
+/*Error Response Address Space */
+#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
+#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
+#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
+#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
+/*Data Direction*/
+#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
+#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
+#define MPI26_NVME_FLAGS_WRITE (0x0001)
+#define MPI26_NVME_FLAGS_READ (0x0002)
+#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003)
+
+
+/*NVMe Encapuslated Reply Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 ErrorResponseCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ Mpi26NVMeEncapsulatedErrorReply_t,
+ *pMpi26NVMeEncapsulatedErrorReply_t;
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
new file mode 100644
index 0000000..b9bb1c1
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -0,0 +1,356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2014 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_raid.h
+ * Title: MPI Integrated RAID messages and structures
+ * Creation Date: April 26, 2007
+ *
+ * mpi2_raid.h Version: 02.00.11
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 08-31-07 02.00.01 Modifications to RAID Action request and reply,
+ * including the Actions and ActionData.
+ * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
+ * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
+ * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
+ * can be sized by the build environment.
+ * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
+ * VolumeCreationFlags and marked the old one as obsolete.
+ * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
+ * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
+ * related structures and defines.
+ * Added product-specific range to RAID Action values.
+ * 11-18-11 02.00.07 Incorporating additions for MPI v2.5.
+ * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
+ * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
+ * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
+ * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
+ * 11-18-14 02.00.11 Updated copyright information.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_RAID_H
+#define MPI2_RAID_H
+
+/*****************************************************************************
+*
+* Integrated RAID Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* RAID Action messages
+****************************************************************************/
+
+/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
+#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000)
+
+/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
+#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
+#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
+#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001)
+
+/*ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
+typedef struct _MPI2_RAID_ACTION_RATE_DATA {
+ U8 RateToChange; /*0x00 */
+ U8 RateOrMode; /*0x01 */
+ U16 DataScrubDuration; /*0x02 */
+} MPI2_RAID_ACTION_RATE_DATA, *PTR_MPI2_RAID_ACTION_RATE_DATA,
+ Mpi2RaidActionRateData_t, *pMpi2RaidActionRateData_t;
+
+#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00)
+#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01)
+#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02)
+
+/*ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION {
+ U8 RAIDFunction; /*0x00 */
+ U8 Flags; /*0x01 */
+ U16 Reserved1; /*0x02 */
+} MPI2_RAID_ACTION_START_RAID_FUNCTION,
+ *PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
+ Mpi2RaidActionStartRaidFunction_t,
+ *pMpi2RaidActionStartRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00)
+#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_START_NEW (0x00)
+#define MPI2_RAID_ACTION_START_RESUME (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION {
+ U8 RAIDFunction; /*0x00 */
+ U8 Flags; /*0x01 */
+ U16 Reserved1; /*0x02 */
+} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+ *PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+ Mpi2RaidActionStopRaidFunction_t,
+ *pMpi2RaidActionStopRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00)
+#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_STOP_ABORT (0x00)
+#define MPI2_RAID_ACTION_STOP_PAUSE (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
+typedef struct _MPI2_RAID_ACTION_HOT_SPARE {
+ U8 HotSparePool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 DevHandle; /*0x02 */
+} MPI2_RAID_ACTION_HOT_SPARE, *PTR_MPI2_RAID_ACTION_HOT_SPARE,
+ Mpi2RaidActionHotSpare_t, *pMpi2RaidActionHotSpare_t;
+
+/*ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
+typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE {
+ U8 Flags; /*0x00 */
+ U8 DeviceFirmwareUpdateModeTimeout; /*0x01 */
+ U16 Reserved1; /*0x02 */
+} MPI2_RAID_ACTION_FW_UPDATE_MODE,
+ *PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
+ Mpi2RaidActionFwUpdateMode_t,
+ *pMpi2RaidActionFwUpdateMode_t;
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
+#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00)
+#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01)
+
+typedef union _MPI2_RAID_ACTION_DATA {
+ U32 Word;
+ MPI2_RAID_ACTION_RATE_DATA Rates;
+ MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
+ MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
+ MPI2_RAID_ACTION_HOT_SPARE HotSpare;
+ MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
+} MPI2_RAID_ACTION_DATA, *PTR_MPI2_RAID_ACTION_DATA,
+ Mpi2RaidActionData_t, *pMpi2RaidActionData_t;
+
+/*RAID Action Request Message */
+typedef struct _MPI2_RAID_ACTION_REQUEST {
+ U8 Action; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 VolDevHandle; /*0x04 */
+ U8 PhysDiskNum; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+ MPI2_RAID_ACTION_DATA ActionDataWord; /*0x10 */
+ MPI2_SGE_SIMPLE_UNION ActionDataSGE; /*0x14 */
+} MPI2_RAID_ACTION_REQUEST, *PTR_MPI2_RAID_ACTION_REQUEST,
+ Mpi2RaidActionRequest_t, *pMpi2RaidActionRequest_t;
+
+/*RAID Action request Action values */
+
+#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01)
+#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02)
+#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03)
+#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04)
+#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05)
+#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
+#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
+#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F)
+#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11)
+#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
+#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17)
+#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18)
+#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19)
+#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C)
+#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D)
+#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E)
+#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20)
+#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21)
+#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22)
+#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23)
+#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24)
+#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF)
+
+/*RAID Volume Creation Structure */
+
+/*
+ *The following define can be customized for the targeted product.
+ */
+#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
+#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1)
+#endif
+
+typedef struct _MPI2_RAID_VOLUME_PHYSDISK {
+ U8 RAIDSetNum; /*0x00 */
+ U8 PhysDiskMap; /*0x01 */
+ U16 PhysDiskDevHandle; /*0x02 */
+} MPI2_RAID_VOLUME_PHYSDISK, *PTR_MPI2_RAID_VOLUME_PHYSDISK,
+ Mpi2RaidVolumePhysDisk_t, *pMpi2RaidVolumePhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01)
+#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02)
+
+typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT {
+ U8 NumPhysDisks; /*0x00 */
+ U8 VolumeType; /*0x01 */
+ U16 Reserved1; /*0x02 */
+ U32 VolumeCreationFlags; /*0x04 */
+ U32 VolumeSettings; /*0x08 */
+ U8 Reserved2; /*0x0C */
+ U8 ResyncRate; /*0x0D */
+ U16 DataScrubDuration; /*0x0E */
+ U64 VolumeMaxLBA; /*0x10 */
+ U32 StripeSize; /*0x18 */
+ U8 Name[16]; /*0x1C */
+ MPI2_RAID_VOLUME_PHYSDISK
+ PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS]; /*0x2C */
+} MPI2_RAID_VOLUME_CREATION_STRUCT,
+ *PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
+ Mpi2RaidVolumeCreationStruct_t,
+ *pMpi2RaidVolumeCreationStruct_t;
+
+/*use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
+
+/*defines for the VolumeCreationFlags field */
+#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
+#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
+#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
+#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
+/*The following is an obsolete define.
+ *It must be shifted left 24 bits in order to set the proper bit.
+ */
+#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
+
+/*RAID Online Capacity Expansion Structure */
+
+typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION {
+ U32 Flags; /*0x00 */
+ U16 DevHandle0; /*0x04 */
+ U16 Reserved1; /*0x06 */
+ U16 DevHandle1; /*0x08 */
+ U16 Reserved2; /*0x0A */
+} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+ *PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+ Mpi2RaidOnlineCapacityExpansion_t,
+ *pMpi2RaidOnlineCapacityExpansion_t;
+
+/*RAID Compatibility Input Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
+ U16 SourceDevHandle; /*0x00 */
+ U16 CandidateDevHandle; /*0x02 */
+ U32 Flags; /*0x04 */
+ U32 Reserved1; /*0x08 */
+ U32 Reserved2; /*0x0C */
+} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+ *PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+ Mpi2RaidCompatibilityInputStruct_t,
+ *pMpi2RaidCompatibilityInputStruct_t;
+
+/*defines for RAID Compatibility Structure Flags field */
+#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002)
+#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001)
+
+/*RAID Volume Indicator Structure */
+
+typedef struct _MPI2_RAID_VOL_INDICATOR {
+ U64 TotalBlocks; /*0x00 */
+ U64 BlocksRemaining; /*0x08 */
+ U32 Flags; /*0x10 */
+ U32 ElapsedSeconds; /* 0x14 */
+} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
+ Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
+
+/*defines for RAID Volume Indicator Flags field */
+#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
+#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
+#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
+#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
+#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002)
+#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003)
+#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004)
+
+/*RAID Compatibility Result Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
+ U8 State; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 GenericAttributes; /*0x04 */
+ U32 OEMSpecificAttributes; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ U32 Reserved4; /*0x10 */
+} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+ *PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+ Mpi2RaidCompatibilityResultStruct_t,
+ *pMpi2RaidCompatibilityResultStruct_t;
+
+/*defines for RAID Compatibility Result Structure State field */
+#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00)
+#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01)
+
+/*defines for RAID Compatibility Result Structure GenericAttributes field */
+#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C)
+#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008)
+#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003)
+#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002)
+#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001)
+
+/*RAID Action Reply ActionData union */
+typedef union _MPI2_RAID_ACTION_REPLY_DATA {
+ U32 Word[6];
+ MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
+ U16 VolDevHandle;
+ U8 VolumeState;
+ U8 PhysDiskNum;
+ MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult;
+} MPI2_RAID_ACTION_REPLY_DATA, *PTR_MPI2_RAID_ACTION_REPLY_DATA,
+ Mpi2RaidActionReplyData_t, *pMpi2RaidActionReplyData_t;
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*RAID Action Reply Message */
+typedef struct _MPI2_RAID_ACTION_REPLY {
+ U8 Action; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 VolDevHandle; /*0x04 */
+ U8 PhysDiskNum; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ MPI2_RAID_ACTION_REPLY_DATA ActionData; /*0x14 */
+} MPI2_RAID_ACTION_REPLY, *PTR_MPI2_RAID_ACTION_REPLY,
+ Mpi2RaidActionReply_t, *pMpi2RaidActionReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
new file mode 100644
index 0000000..afa17ff
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_sas.h
+ * Title: MPI Serial Attached SCSI structures and definitions
+ * Creation Date: February 9, 2007
+ *
+ * mpi2_sas.h Version: 02.00.10
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
+ * Control Request.
+ * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
+ * Request.
+ * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ * to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ * 05-12-10 02.00.04 Modified some comments.
+ * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
+ * 11-18-11 02.00.06 Incorporating additions for MPI v2.5.
+ * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA
+ * Passthrough Request message.
+ * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
+ * for anything newer than MPI v2.0.
+ * 11-18-14 02.00.09 Updated copyright information.
+ * 03-16-15 02.00.10 Updated for MPI v2.6.
+ * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_SAS_H
+#define MPI2_SAS_H
+
+/*
+ *Values for SASStatus.
+ */
+#define MPI2_SASSTATUS_SUCCESS (0x00)
+#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
+#define MPI2_SASSTATUS_INVALID_FRAME (0x02)
+#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
+#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
+#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
+#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
+#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
+#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
+#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
+#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
+#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
+#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
+#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
+#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
+#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
+#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
+#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
+#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
+#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
+#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
+
+/*
+ *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ *data and SAS Configuration pages.
+ */
+#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
+#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
+#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
+#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
+#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
+#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
+#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
+#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
+#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
+#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
+#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
+#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
+
+#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
+#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
+#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
+#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
+#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
+
+/*****************************************************************************
+*
+* SAS Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SMP Passthrough messages
+****************************************************************************/
+
+/*SMP Passthrough Request Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
+ U8 PassthroughFlags; /*0x00 */
+ U8 PhysicalPort; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 RequestDataLength; /*0x04 */
+ U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U32 Reserved2; /*0x0C */
+ U64 SASAddress; /*0x10 */
+ U32 Reserved3; /*0x18 */
+ U32 Reserved4; /*0x1C */
+ MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
+} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
+ Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SMP Passthrough Reply Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
+ U8 PassthroughFlags; /*0x00 */
+ U8 PhysicalPort; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 ResponseDataLength; /*0x04 */
+ U8 SGLFlags; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U8 Reserved2; /*0x0C */
+ U8 SASStatus; /*0x0D */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 Reserved3; /*0x14 */
+ U8 ResponseData[4]; /*0x18 */
+} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
+ Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SATA Passthrough messages
+****************************************************************************/
+
+typedef union _MPI2_SATA_PT_SGE_UNION {
+ MPI2_SGE_SIMPLE_UNION MpiSimple; /*MPI v2.0 only */
+ MPI2_SGE_CHAIN_UNION MpiChain; /*MPI v2.0 only */
+ MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+ MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /*MPI v2.0 only */
+ MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /*MPI v2.5 only */
+} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
+ Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
+
+/*SATA Passthrough Request Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 PassthroughFlags; /*0x04 */
+ U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U32 Reserved2; /*0x0C */
+ U32 Reserved3; /*0x10 */
+ U32 Reserved4; /*0x14 */
+ U32 DataLength; /*0x18 */
+ U8 CommandFIS[20]; /*0x1C */
+ MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
+} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
+ Mpi2SataPassthroughRequest_t,
+ *pMpi2SataPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA (0x0040)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SATA Passthrough Reply Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 PassthroughFlags; /*0x04 */
+ U8 SGLFlags; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U8 Reserved2; /*0x0C */
+ U8 SASStatus; /*0x0D */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 StatusFIS[20]; /*0x14 */
+ U32 StatusControlRegisters; /*0x28 */
+ U32 TransferCount; /*0x2C */
+} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
+ Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SAS IO Unit Control messages
+* (MPI v2.5 and earlier only.
+* Replaced by IO Unit Control messages in MPI v2.6 and later.)
+****************************************************************************/
+
+/*SAS IO Unit Control Request Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
+ U8 Operation; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 DevHandle; /*0x04 */
+ U8 IOCParameter; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U8 PhyNum; /*0x0E */
+ U8 PrimFlags; /*0x0F */
+ U32 Primitive; /*0x10 */
+ U8 LookupMethod; /*0x14 */
+ U8 Reserved5; /*0x15 */
+ U16 SlotNumber; /*0x16 */
+ U64 LookupAddress; /*0x18 */
+ U32 IOCParameterValue; /*0x20 */
+ U32 Reserved7; /*0x24 */
+ U32 Reserved8; /*0x28 */
+} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+ *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+ Mpi2SasIoUnitControlRequest_t,
+ *pMpi2SasIoUnitControlRequest_t;
+
+/*values for the Operation field */
+#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
+#define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
+#define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
+#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
+#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
+#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
+#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
+#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
+#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
+#define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10)
+#define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11)
+#define MPI25_SAS_OP_ENABLE_FP_ALL (0x12)
+#define MPI25_SAS_OP_DISABLE_FP_ALL (0x13)
+#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
+#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
+#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
+
+/*values for the PrimFlags field */
+#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
+#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
+#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
+
+/*values for the LookupMethod field */
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
+
+/*SAS IO Unit Control Reply Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
+ U8 Operation; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 DevHandle; /*0x04 */
+ U8 IOCParameter; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_SAS_IOUNIT_CONTROL_REPLY,
+ *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
+ Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
new file mode 100644
index 0000000..629296e
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -0,0 +1,496 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2014 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_tool.h
+ * Title: MPI diagnostic tool structures and definitions
+ * Creation Date: March 26, 2007
+ *
+ * mpi2_tool.h Version: 02.00.14
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
+ * structures and defines.
+ * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
+ * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
+ * and reply messages.
+ * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
+ * Incremented MPI2_DIAG_BUF_TYPE_COUNT.
+ * 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
+ * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
+ * Post Request.
+ * 05-25-11 02.00.07 Added Flags field and related defines to
+ * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
+ * 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
+ * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
+ * message.
+ * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
+ * it uses MPI Chain SGE as well as MPI Simple SGE.
+ * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
+ * 11-18-14 02.00.13 Updated copyright information.
+ * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
+ * Tool Request Message.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TOOL_H
+#define MPI2_TOOL_H
+
+/*****************************************************************************
+*
+* Toolbox Messages
+*
+*****************************************************************************/
+
+/*defines for the Tools */
+#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
+#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
+#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
+#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
+#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
+#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
+#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
+
+/****************************************************************************
+* Toolbox reply
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_REPLY {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY,
+ Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t;
+
+/****************************************************************************
+* Toolbox Clean Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Flags; /*0x0C */
+} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
+ Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
+#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
+#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
+#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
+#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
+#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
+#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
+#define MPI2_TOOLBOX_CLEAN_SBR (0x00800000)
+#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP (0x00400000)
+#define MPI2_TOOLBOX_CLEAN_HIIM (0x00200000)
+#define MPI2_TOOLBOX_CLEAN_HIIA (0x00100000)
+#define MPI2_TOOLBOX_CLEAN_CTLR (0x00080000)
+#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE (0x00040000)
+#define MPI2_TOOLBOX_CLEAN_MR_NVDATA (0x00020000)
+#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16 (0x0001FFE0)
+#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB (0x00000010)
+#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH (0x00000008)
+#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
+#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
+#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
+
+/****************************************************************************
+* Toolbox Memory Move request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ MPI2_SGE_SIMPLE_UNION SGL; /*0x0C */
+} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
+ Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t;
+
+/****************************************************************************
+* Toolbox Diagnostic Data Upload request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 SGLFlags; /*0x0C */
+ U8 Reserved5; /*0x0D */
+ U16 Reserved6; /*0x0E */
+ U32 Flags; /*0x10 */
+ U32 DataLength; /*0x14 */
+ MPI2_SGE_SIMPLE_UNION SGL; /*0x18 */
+} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+ *PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+ Mpi2ToolboxDiagDataUploadRequest_t,
+ *pMpi2ToolboxDiagDataUploadRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
+ U32 DiagDataLength; /*00h */
+ U8 FormatCode; /*04h */
+ U8 Reserved1; /*05h */
+ U16 Reserved2; /*06h */
+} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
+ Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t;
+
+/****************************************************************************
+* Toolbox ISTWI Read Write Tool
+****************************************************************************/
+
+/*Toolbox ISTWI Read Write Tool request message */
+typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ U8 DevIndex; /*0x14 */
+ U8 Action; /*0x15 */
+ U8 SGLFlags; /*0x16 */
+ U8 Flags; /*0x17 */
+ U16 TxDataLength; /*0x18 */
+ U16 RxDataLength; /*0x1A */
+ U32 Reserved8; /*0x1C */
+ U32 Reserved9; /*0x20 */
+ U32 Reserved10; /*0x24 */
+ U32 Reserved11; /*0x28 */
+ U32 Reserved12; /*0x2C */
+ MPI2_SGE_SIMPLE_UNION SGL; /*0x30 */
+} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+ *PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+ Mpi2ToolboxIstwiReadWriteRequest_t,
+ *pMpi2ToolboxIstwiReadWriteRequest_t;
+
+/*values for the Action field */
+#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
+#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
+#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
+#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
+#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
+#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*values for the Flags field */
+#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
+#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
+
+/*Toolbox ISTWI Read Write Tool reply message */
+typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 DevIndex; /*0x14 */
+ U8 Action; /*0x15 */
+ U8 IstwiStatus; /*0x16 */
+ U8 Reserved6; /*0x17 */
+ U16 TxDataCount; /*0x18 */
+ U16 RxDataCount; /*0x1A */
+} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY,
+ Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t;
+
+/****************************************************************************
+* Toolbox Beacon Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_BEACON_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 Reserved5; /*0x0C */
+ U8 PhysicalPort; /*0x0D */
+ U8 Reserved6; /*0x0E */
+ U8 Flags; /*0x0F */
+} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST,
+ Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
+
+/****************************************************************************
+* Toolbox Diagnostic CLI Tool
+****************************************************************************/
+
+#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
+
+/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 SGLFlags; /*0x0C */
+ U8 Reserved5; /*0x0D */
+ U16 Reserved6; /*0x0E */
+ U32 DataLength; /*0x10 */
+ U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+ MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ *PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ Mpi2ToolboxDiagnosticCliRequest_t,
+ *pMpi2ToolboxDiagnosticCliRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 DataLength; /*0x10 */
+ U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+ MPI25_SGE_IO_UNION SGL; /* 0x70 */
+} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ *PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ Mpi25ToolboxDiagnosticCliRequest_t,
+ *pMpi25ToolboxDiagnosticCliRequest_t;
+
+/*Toolbox Diagnostic CLI Tool reply message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 ReturnedDataLength; /*0x14 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
+ *PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
+ Mpi2ToolboxDiagnosticCliReply_t,
+ *pMpi2ToolboxDiagnosticCliReply_t;
+
+
+/****************************************************************************
+* Toolbox Console Text Display Tool
+****************************************************************************/
+
+/* Toolbox Console Text Display Tool request message */
+typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
+ U8 Tool; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U8 Console; /* 0x0C */
+ U8 Flags; /* 0x0D */
+ U16 Reserved6; /* 0x0E */
+ U8 TextToDisplay[4]; /* 0x10 */
+} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
+*PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
+Mpi2ToolboxTextDisplayRequest_t,
+*pMpi2ToolboxTextDisplayRequest_t;
+
+/* defines for the Console field */
+#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20)
+
+#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F)
+
+/* defines for the Flags field */
+#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
+
+
+
+/*****************************************************************************
+*
+* Diagnostic Buffer Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Diagnostic Buffer Post request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST {
+ U8 ExtendedType; /*0x00 */
+ U8 BufferType; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U64 BufferAddress; /*0x0C */
+ U32 BufferLength; /*0x14 */
+ U32 Reserved5; /*0x18 */
+ U32 Reserved6; /*0x1C */
+ U32 Flags; /*0x20 */
+ U32 ProductSpecific[23]; /*0x24 */
+} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
+ Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t;
+
+/*values for the ExtendedType field */
+#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
+
+/*values for the BufferType field */
+#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
+#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
+#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
+/*count of the number of buffer types */
+#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
+
+/*values for the Flags field */
+#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002)
+#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REPLY {
+ U8 ExtendedType; /*0x00 */
+ U8 BufferType; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 TransferLength; /*0x14 */
+} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY,
+ Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t;
+
+/****************************************************************************
+* Diagnostic Release request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REQUEST {
+ U8 Reserved1; /*0x00 */
+ U8 BufferType; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST,
+ Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t;
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REPLY {
+ U8 Reserved1; /*0x00 */
+ U8 BufferType; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY,
+ Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
new file mode 100644
index 0000000..3649443
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2014 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_type.h
+ * Title: MPI basic type definitions
+ * Creation Date: August 16, 2006
+ *
+ * mpi2_type.h Version: 02.00.01
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 11-18-14 02.00.01 Updated copyright information.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TYPE_H
+#define MPI2_TYPE_H
+
+/*******************************************************************************
+ * Define * if it hasn't already been defined. By default
+ * * is defined to be a near pointer. MPI2_POINTER can be defined as
+ * a far pointer by defining * as "far *" before this header file is
+ * included.
+ */
+
+/* the basic types may have already been included by mpi_type.h */
+#ifndef MPI_TYPE_H
+/*****************************************************************************
+*
+* Basic Types
+*
+*****************************************************************************/
+
+typedef u8 U8;
+typedef __le16 U16;
+typedef __le32 U32;
+typedef __le64 U64 __attribute__ ((aligned(4)));
+
+/*****************************************************************************
+*
+* Pointer Types
+*
+*****************************************************************************/
+
+typedef U8 *PU8;
+typedef U16 *PU16;
+typedef U32 *PU32;
+typedef U64 *PU64;
+
+#endif
+
+#endif