v4.19.13 snapshot.
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
new file mode 100644
index 0000000..13739bf
--- /dev/null
+++ b/drivers/scsi/libsas/Kconfig
@@ -0,0 +1,49 @@
+#
+# Kernel configuration file for the SAS Class
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+
+config SCSI_SAS_LIBSAS
+ tristate "SAS Domain Transport Attributes"
+ depends on SCSI
+ select SCSI_SAS_ATTRS
+ select BLK_DEV_BSGLIB
+ help
+ This provides transport specific helpers for SAS drivers which
+ use the domain device construct (like the aic94xxx).
+
+config SCSI_SAS_ATA
+ bool "ATA support for libsas (requires libata)"
+ depends on SCSI_SAS_LIBSAS
+ depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+ help
+ Builds in ATA support into libsas. Will necessitate
+ the loading of libata along with libsas.
+
+config SCSI_SAS_HOST_SMP
+ bool "Support for SMP interpretation for SAS hosts"
+ default y
+ depends on SCSI_SAS_LIBSAS
+ help
+ Allows sas hosts to receive SMP frames. Selecting this
+ option builds an SMP interpreter into libsas. Say
+ N here if you want to save the few kb this consumes.
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
new file mode 100644
index 0000000..2e70140
--- /dev/null
+++ b/drivers/scsi/libsas/Makefile
@@ -0,0 +1,35 @@
+#
+# Kernel Makefile for the libsas helpers
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
+libsas-y += sas_init.o \
+ sas_phy.o \
+ sas_port.o \
+ sas_event.o \
+ sas_dump.o \
+ sas_discover.o \
+ sas_expander.o \
+ sas_scsi_host.o \
+ sas_task.o
+libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o
+libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
new file mode 100644
index 0000000..64a958a
--- /dev/null
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -0,0 +1,874 @@
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/async.h>
+#include <linux/export.h>
+
+#include <scsi/sas_ata.h>
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+#include "../scsi_transport_api.h"
+#include <scsi/scsi_eh.h>
+
+static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
+{
+ /* Cheesy attempt to translate SAS errors into ATA. Hah! */
+
+ /* transport error */
+ if (ts->resp == SAS_TASK_UNDELIVERED)
+ return AC_ERR_ATA_BUS;
+
+ /* ts->resp == SAS_TASK_COMPLETE */
+ /* task delivered, what happened afterwards? */
+ switch (ts->stat) {
+ case SAS_DEV_NO_RESPONSE:
+ return AC_ERR_TIMEOUT;
+
+ case SAS_INTERRUPTED:
+ case SAS_PHY_DOWN:
+ case SAS_NAK_R_ERR:
+ return AC_ERR_ATA_BUS;
+
+
+ case SAS_DATA_UNDERRUN:
+ /*
+ * Some programs that use the taskfile interface
+ * (smartctl in particular) can cause underrun
+ * problems. Ignore these errors, perhaps at our
+ * peril.
+ */
+ return 0;
+
+ case SAS_DATA_OVERRUN:
+ case SAS_QUEUE_FULL:
+ case SAS_DEVICE_UNKNOWN:
+ case SAS_SG_ERR:
+ return AC_ERR_INVALID;
+
+ case SAS_OPEN_TO:
+ case SAS_OPEN_REJECT:
+ SAS_DPRINTK("%s: Saw error %d. What to do?\n",
+ __func__, ts->stat);
+ return AC_ERR_OTHER;
+
+ case SAM_STAT_CHECK_CONDITION:
+ case SAS_ABORTED_TASK:
+ return AC_ERR_DEV;
+
+ case SAS_PROTO_RESPONSE:
+ /* This means the ending_fis has the error
+ * value; return 0 here to collect it */
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static void sas_ata_task_done(struct sas_task *task)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+ struct domain_device *dev = task->dev;
+ struct task_status_struct *stat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ enum ata_completion_errors ac;
+ unsigned long flags;
+ struct ata_link *link;
+ struct ata_port *ap;
+
+ spin_lock_irqsave(&dev->done_lock, flags);
+ if (test_bit(SAS_HA_FROZEN, &sas_ha->state))
+ task = NULL;
+ else if (qc && qc->scsicmd)
+ ASSIGN_SAS_TASK(qc->scsicmd, NULL);
+ spin_unlock_irqrestore(&dev->done_lock, flags);
+
+ /* check if libsas-eh got to the task before us */
+ if (unlikely(!task))
+ return;
+
+ if (!qc)
+ goto qc_already_gone;
+
+ ap = qc->ap;
+ link = &ap->link;
+
+ spin_lock_irqsave(ap->lock, flags);
+ /* check if we lost the race with libata/sas_ata_post_internal() */
+ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ if (qc->scsicmd)
+ goto qc_already_gone;
+ else {
+ /* if eh is not involved and the port is frozen then the
+ * ata internal abort process has taken responsibility
+ * for this sas_task
+ */
+ return;
+ }
+ }
+
+ if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
+ ((stat->stat == SAM_STAT_CHECK_CONDITION &&
+ dev->sata_dev.class == ATA_DEV_ATAPI))) {
+ memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
+
+ if (!link->sactive) {
+ qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
+ } else {
+ link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
+ if (unlikely(link->eh_info.err_mask))
+ qc->flags |= ATA_QCFLAG_FAILED;
+ }
+ } else {
+ ac = sas_to_ata_err(stat);
+ if (ac) {
+ SAS_DPRINTK("%s: SAS error %x\n", __func__,
+ stat->stat);
+ /* We saw a SAS error. Send a vague error. */
+ if (!link->sactive) {
+ qc->err_mask = ac;
+ } else {
+ link->eh_info.err_mask |= AC_ERR_DEV;
+ qc->flags |= ATA_QCFLAG_FAILED;
+ }
+
+ dev->sata_dev.fis[3] = 0x04; /* status err */
+ dev->sata_dev.fis[2] = ATA_ERR;
+ }
+ }
+
+ qc->lldd_task = NULL;
+ ata_qc_complete(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+
+qc_already_gone:
+ sas_free_task(task);
+}
+
+static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct sas_task *task;
+ struct scatterlist *sg;
+ int ret = AC_ERR_SYSTEM;
+ unsigned int si, xfer = 0;
+ struct ata_port *ap = qc->ap;
+ struct domain_device *dev = ap->private_data;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *host = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(host->transportt);
+
+ /* TODO: we should try to remove that unlock */
+ spin_unlock(ap->lock);
+
+ /* If the device fell off, no sense in issuing commands */
+ if (test_bit(SAS_DEV_GONE, &dev->state))
+ goto out;
+
+ task = sas_alloc_task(GFP_ATOMIC);
+ if (!task)
+ goto out;
+ task->dev = dev;
+ task->task_proto = SAS_PROTOCOL_STP;
+ task->task_done = sas_ata_task_done;
+
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ ||
+ qc->tf.command == ATA_CMD_FPDMA_RECV ||
+ qc->tf.command == ATA_CMD_FPDMA_SEND ||
+ qc->tf.command == ATA_CMD_NCQ_NON_DATA) {
+ /* Need to zero out the tag libata assigned us */
+ qc->tf.nsect = 0;
+ }
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
+ task->uldd_task = qc;
+ if (ata_is_atapi(qc->tf.protocol)) {
+ memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
+ task->total_xfer_len = qc->nbytes;
+ task->num_scatter = qc->n_elem;
+ } else {
+ for_each_sg(qc->sg, sg, qc->n_elem, si)
+ xfer += sg_dma_len(sg);
+
+ task->total_xfer_len = xfer;
+ task->num_scatter = si;
+ }
+
+ task->data_dir = qc->dma_dir;
+ task->scatter = qc->sg;
+ task->ata_task.retry_count = 1;
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ qc->lldd_task = task;
+
+ task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol);
+ task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol);
+
+ if (qc->scsicmd)
+ ASSIGN_SAS_TASK(qc->scsicmd, task);
+
+ ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
+ if (ret) {
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
+
+ if (qc->scsicmd)
+ ASSIGN_SAS_TASK(qc->scsicmd, NULL);
+ sas_free_task(task);
+ qc->lldd_task = NULL;
+ ret = AC_ERR_SYSTEM;
+ }
+
+ out:
+ spin_lock(ap->lock);
+ return ret;
+}
+
+static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct domain_device *dev = qc->ap->private_data;
+
+ ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
+ return true;
+}
+
+static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
+{
+ return to_sas_internal(dev->port->ha->core.shost->transportt);
+}
+
+static int sas_get_ata_command_set(struct domain_device *dev);
+
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+ if (phy->attached_tproto & SAS_PROTOCOL_STP)
+ dev->tproto = phy->attached_tproto;
+ if (phy->attached_sata_dev)
+ dev->tproto |= SAS_SATA_DEV;
+
+ if (phy->attached_dev_type == SAS_SATA_PENDING)
+ dev->dev_type = SAS_SATA_PENDING;
+ else {
+ int res;
+
+ dev->dev_type = SAS_SATA_DEV;
+ res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
+ &dev->sata_dev.rps_resp);
+ if (res) {
+ SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+ "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
+ phy->phy_id, res);
+ return res;
+ }
+ memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
+ sizeof(struct dev_to_host_fis));
+ dev->sata_dev.class = sas_get_ata_command_set(dev);
+ }
+ return 0;
+}
+
+static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
+{
+ int res;
+
+ /* we weren't pending, so successfully end the reset sequence now */
+ if (dev->dev_type != SAS_SATA_PENDING)
+ return 1;
+
+ /* hmmm, if this succeeds do we need to repost the domain_device to the
+ * lldd so it can pick up new parameters?
+ */
+ res = sas_get_ata_info(dev, phy);
+ if (res)
+ return 0; /* retry */
+ else
+ return 1;
+}
+
+static int smp_ata_check_ready(struct ata_link *link)
+{
+ int res;
+ struct ata_port *ap = link->ap;
+ struct domain_device *dev = ap->private_data;
+ struct domain_device *ex_dev = dev->parent;
+ struct sas_phy *phy = sas_get_local_phy(dev);
+ struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
+
+ res = sas_ex_phy_discover(ex_dev, phy->number);
+ sas_put_local_phy(phy);
+
+ /* break the wait early if the expander is unreachable,
+ * otherwise keep polling
+ */
+ if (res == -ECOMM)
+ return res;
+ if (res != SMP_RESP_FUNC_ACC)
+ return 0;
+
+ switch (ex_phy->attached_dev_type) {
+ case SAS_SATA_PENDING:
+ return 0;
+ case SAS_END_DEVICE:
+ if (ex_phy->attached_sata_dev)
+ return sas_ata_clear_pending(dev, ex_phy);
+ /* fall through */
+ default:
+ return -ENODEV;
+ }
+}
+
+static int local_ata_check_ready(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct domain_device *dev = ap->private_data;
+ struct sas_internal *i = dev_to_sas_internal(dev);
+
+ if (i->dft->lldd_ata_check_ready)
+ return i->dft->lldd_ata_check_ready(dev);
+ else {
+ /* lldd's that don't implement 'ready' checking get the
+ * old default behavior of not coordinating reset
+ * recovery with libata
+ */
+ return 1;
+ }
+}
+
+static int sas_ata_printk(const char *level, const struct domain_device *ddev,
+ const char *fmt, ...)
+{
+ struct ata_port *ap = ddev->sata_dev.ap;
+ struct device *dev = &ddev->rphy->dev;
+ struct va_format vaf;
+ va_list args;
+ int r;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ r = printk("%ssas: ata%u: %s: %pV",
+ level, ap->print_id, dev_name(dev), &vaf);
+
+ va_end(args);
+
+ return r;
+}
+
+static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int ret = 0, res;
+ struct sas_phy *phy;
+ struct ata_port *ap = link->ap;
+ int (*check_ready)(struct ata_link *link);
+ struct domain_device *dev = ap->private_data;
+ struct sas_internal *i = dev_to_sas_internal(dev);
+
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+ if (res == -ENODEV)
+ return res;
+
+ if (res != TMF_RESP_FUNC_COMPLETE)
+ sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n");
+
+ phy = sas_get_local_phy(dev);
+ if (scsi_is_sas_phy_local(phy))
+ check_ready = local_ata_check_ready;
+ else
+ check_ready = smp_ata_check_ready;
+ sas_put_local_phy(phy);
+
+ ret = ata_wait_after_reset(link, deadline, check_ready);
+ if (ret && ret != -EAGAIN)
+ sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
+
+ *class = dev->sata_dev.class;
+
+ ap->cbl = ATA_CBL_SATA;
+ return ret;
+}
+
+/*
+ * notify the lldd to forget the sas_task for this internal ata command
+ * that bypasses scsi-eh
+ */
+static void sas_ata_internal_abort(struct sas_task *task)
+{
+ struct sas_internal *si = dev_to_sas_internal(task->dev);
+ unsigned long flags;
+ int res;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
+ task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
+ task);
+ goto out;
+ }
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ res = si->dft->lldd_abort_task(task);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE ||
+ res == TMF_RESP_FUNC_COMPLETE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ goto out;
+ }
+
+ /* XXX we are not prepared to deal with ->lldd_abort_task()
+ * failures. TODO: lldds need to unconditionally forget about
+ * aborted ata tasks, otherwise we (likely) leak the sas task
+ * here
+ */
+ SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
+
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return;
+ out:
+ sas_free_task(task);
+}
+
+static void sas_ata_post_internal(struct ata_queued_cmd *qc)
+{
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ if (qc->err_mask) {
+ /*
+ * Find the sas_task and kill it. By this point, libata
+ * has decided to kill the qc and has frozen the port.
+ * In this state sas_ata_task_done() will no longer free
+ * the sas_task, so we need to notify the lldd (via
+ * ->lldd_abort_task) that the task is dead and free it
+ * ourselves.
+ */
+ struct sas_task *task = qc->lldd_task;
+
+ qc->lldd_task = NULL;
+ if (!task)
+ return;
+ task->uldd_task = NULL;
+ sas_ata_internal_abort(task);
+ }
+}
+
+
+static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
+{
+ struct domain_device *dev = ap->private_data;
+ struct sas_internal *i = dev_to_sas_internal(dev);
+
+ if (i->dft->lldd_ata_set_dmamode)
+ i->dft->lldd_ata_set_dmamode(dev);
+}
+
+static void sas_ata_sched_eh(struct ata_port *ap)
+{
+ struct domain_device *dev = ap->private_data;
+ struct sas_ha_struct *ha = dev->port->ha;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->lock, flags);
+ if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state))
+ ha->eh_active++;
+ ata_std_sched_eh(ap);
+ spin_unlock_irqrestore(&ha->lock, flags);
+}
+
+void sas_ata_end_eh(struct ata_port *ap)
+{
+ struct domain_device *dev = ap->private_data;
+ struct sas_ha_struct *ha = dev->port->ha;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->lock, flags);
+ if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state))
+ ha->eh_active--;
+ spin_unlock_irqrestore(&ha->lock, flags);
+}
+
+static struct ata_port_operations sas_sata_ops = {
+ .prereset = ata_std_prereset,
+ .hardreset = sas_ata_hard_reset,
+ .postreset = ata_std_postreset,
+ .error_handler = ata_std_error_handler,
+ .post_internal_cmd = sas_ata_post_internal,
+ .qc_defer = ata_std_qc_defer,
+ .qc_prep = ata_noop_qc_prep,
+ .qc_issue = sas_ata_qc_issue,
+ .qc_fill_rtf = sas_ata_qc_fill_rtf,
+ .port_start = ata_sas_port_start,
+ .port_stop = ata_sas_port_stop,
+ .set_dmamode = sas_ata_set_dmamode,
+ .sched_eh = sas_ata_sched_eh,
+ .end_eh = sas_ata_end_eh,
+};
+
+static struct ata_port_info sata_port_info = {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ |
+ ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sas_sata_ops
+};
+
+int sas_ata_init(struct domain_device *found_dev)
+{
+ struct sas_ha_struct *ha = found_dev->port->ha;
+ struct Scsi_Host *shost = ha->core.shost;
+ struct ata_host *ata_host;
+ struct ata_port *ap;
+ int rc;
+
+ ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL);
+ if (!ata_host) {
+ SAS_DPRINTK("ata host alloc failed.\n");
+ return -ENOMEM;
+ }
+
+ ata_host_init(ata_host, ha->dev, &sas_sata_ops);
+
+ ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost);
+ if (!ap) {
+ SAS_DPRINTK("ata_sas_port_alloc failed.\n");
+ rc = -ENODEV;
+ goto free_host;
+ }
+
+ ap->private_data = found_dev;
+ ap->cbl = ATA_CBL_SATA;
+ ap->scsi_host = shost;
+ rc = ata_sas_port_init(ap);
+ if (rc)
+ goto destroy_port;
+
+ rc = ata_sas_tport_add(ata_host->dev, ap);
+ if (rc)
+ goto destroy_port;
+
+ found_dev->sata_dev.ata_host = ata_host;
+ found_dev->sata_dev.ap = ap;
+
+ return 0;
+
+destroy_port:
+ ata_sas_port_destroy(ap);
+free_host:
+ ata_host_put(ata_host);
+ return rc;
+}
+
+void sas_ata_task_abort(struct sas_task *task)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+ struct completion *waiting;
+
+ /* Bounce SCSI-initiated commands to the SCSI EH */
+ if (qc->scsicmd) {
+ struct request_queue *q = qc->scsicmd->device->request_queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_abort_request(qc->scsicmd->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ return;
+ }
+
+ /* Internal command, fake a timeout and complete. */
+ qc->flags &= ~ATA_QCFLAG_ACTIVE;
+ qc->flags |= ATA_QCFLAG_FAILED;
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ waiting = qc->private_data;
+ complete(waiting);
+}
+
+static int sas_get_ata_command_set(struct domain_device *dev)
+{
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+ struct ata_taskfile tf;
+
+ if (dev->dev_type == SAS_SATA_PENDING)
+ return ATA_DEV_UNKNOWN;
+
+ ata_tf_from_fis((const u8 *)fis, &tf);
+
+ return ata_dev_classify(&tf);
+}
+
+void sas_probe_sata(struct asd_sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ mutex_lock(&port->ha->disco_mutex);
+ list_for_each_entry(dev, &port->disco_list, disco_list_node) {
+ if (!dev_is_sata(dev))
+ continue;
+
+ ata_sas_async_probe(dev->sata_dev.ap);
+ }
+ mutex_unlock(&port->ha->disco_mutex);
+
+ list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
+ if (!dev_is_sata(dev))
+ continue;
+
+ sas_ata_wait_eh(dev);
+
+ /* if libata could not bring the link up, don't surface
+ * the device
+ */
+ if (ata_dev_disabled(sas_to_ata_dev(dev)))
+ sas_fail_probe(dev, __func__, -ENODEV);
+ }
+
+}
+
+static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
+ if (!dev_is_sata(dev))
+ continue;
+
+ sas_ata_wait_eh(dev);
+
+ /* if libata failed to power manage the device, tear it down */
+ if (ata_dev_disabled(sas_to_ata_dev(dev)))
+ sas_fail_probe(dev, func, -ENODEV);
+ }
+}
+
+void sas_suspend_sata(struct asd_sas_port *port)
+{
+ struct domain_device *dev;
+
+ mutex_lock(&port->ha->disco_mutex);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ struct sata_device *sata;
+
+ if (!dev_is_sata(dev))
+ continue;
+
+ sata = &dev->sata_dev;
+ if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
+ continue;
+
+ ata_sas_port_suspend(sata->ap);
+ }
+ mutex_unlock(&port->ha->disco_mutex);
+
+ sas_ata_flush_pm_eh(port, __func__);
+}
+
+void sas_resume_sata(struct asd_sas_port *port)
+{
+ struct domain_device *dev;
+
+ mutex_lock(&port->ha->disco_mutex);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ struct sata_device *sata;
+
+ if (!dev_is_sata(dev))
+ continue;
+
+ sata = &dev->sata_dev;
+ if (sata->ap->pm_mesg.event == PM_EVENT_ON)
+ continue;
+
+ ata_sas_port_resume(sata->ap);
+ }
+ mutex_unlock(&port->ha->disco_mutex);
+
+ sas_ata_flush_pm_eh(port, __func__);
+}
+
+/**
+ * sas_discover_sata - discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * Devices directly attached to a HA port, have no parents. All other
+ * devices do, and should have their "parent" pointer set appropriately
+ * before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+ int res;
+
+ if (dev->dev_type == SAS_SATA_PM)
+ return -ENODEV;
+
+ dev->sata_dev.class = sas_get_ata_command_set(dev);
+ sas_fill_in_rphy(dev, dev->rphy);
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ return 0;
+}
+
+static void async_sas_ata_eh(void *data, async_cookie_t cookie)
+{
+ struct domain_device *dev = data;
+ struct ata_port *ap = dev->sata_dev.ap;
+ struct sas_ha_struct *ha = dev->port->ha;
+
+ sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
+ ata_scsi_port_error_handler(ha->core.shost, ap);
+ sas_put_device(dev);
+}
+
+void sas_ata_strategy_handler(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ ASYNC_DOMAIN_EXCLUSIVE(async);
+ int i;
+
+ /* it's ok to defer revalidation events during ata eh, these
+ * disks are in one of three states:
+ * 1/ present for initial domain discovery, and these
+ * resets will cause bcn flutters
+ * 2/ hot removed, we'll discover that after eh fails
+ * 3/ hot added after initial discovery, lost the race, and need
+ * to catch the next train.
+ */
+ sas_disable_revalidation(sas_ha);
+
+ spin_lock_irq(&sas_ha->phy_port_lock);
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_port *port = sas_ha->sas_port[i];
+ struct domain_device *dev;
+
+ spin_lock(&port->dev_list_lock);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (!dev_is_sata(dev))
+ continue;
+
+ /* hold a reference over eh since we may be
+ * racing with final remove once all commands
+ * are completed
+ */
+ kref_get(&dev->kref);
+
+ async_schedule_domain(async_sas_ata_eh, dev, &async);
+ }
+ spin_unlock(&port->dev_list_lock);
+ }
+ spin_unlock_irq(&sas_ha->phy_port_lock);
+
+ async_synchronize_full_domain(&async);
+
+ sas_enable_revalidation(sas_ha);
+}
+
+void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
+ struct list_head *done_q)
+{
+ struct scsi_cmnd *cmd, *n;
+ struct domain_device *eh_dev;
+
+ do {
+ LIST_HEAD(sata_q);
+ eh_dev = NULL;
+
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
+ struct domain_device *ddev = cmd_to_domain_dev(cmd);
+
+ if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
+ continue;
+ if (eh_dev && eh_dev != ddev)
+ continue;
+ eh_dev = ddev;
+ list_move(&cmd->eh_entry, &sata_q);
+ }
+
+ if (!list_empty(&sata_q)) {
+ struct ata_port *ap = eh_dev->sata_dev.ap;
+
+ sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n");
+ ata_scsi_cmd_error_handler(shost, ap, &sata_q);
+ /*
+ * ata's error handler may leave the cmd on the list
+ * so make sure they don't remain on a stack list
+ * about to go out of scope.
+ *
+ * This looks strange, since the commands are
+ * now part of no list, but the next error
+ * action will be ata_port_error_handler()
+ * which takes no list and sweeps them up
+ * anyway from the ata tag array.
+ */
+ while (!list_empty(&sata_q))
+ list_del_init(sata_q.next);
+ }
+ } while (eh_dev);
+}
+
+void sas_ata_schedule_reset(struct domain_device *dev)
+{
+ struct ata_eh_info *ehi;
+ struct ata_port *ap;
+ unsigned long flags;
+
+ if (!dev_is_sata(dev))
+ return;
+
+ ap = dev->sata_dev.ap;
+ ehi = &ap->link.eh_info;
+
+ spin_lock_irqsave(ap->lock, flags);
+ ehi->err_mask |= AC_ERR_TIMEOUT;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_schedule_eh(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
+}
+EXPORT_SYMBOL_GPL(sas_ata_schedule_reset);
+
+void sas_ata_wait_eh(struct domain_device *dev)
+{
+ struct ata_port *ap;
+
+ if (!dev_is_sata(dev))
+ return;
+
+ ap = dev->sata_dev.ap;
+ ata_port_wait_eh(ap);
+}
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
new file mode 100644
index 0000000..0148ae6
--- /dev/null
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -0,0 +1,600 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/async.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/sas_ata.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+void sas_init_dev(struct domain_device *dev)
+{
+ switch (dev->dev_type) {
+ case SAS_END_DEVICE:
+ INIT_LIST_HEAD(&dev->ssp_dev.eh_list_node);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ INIT_LIST_HEAD(&dev->ex_dev.children);
+ mutex_init(&dev->ex_dev.cmd_mutex);
+ break;
+ default:
+ break;
+ }
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device - Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent. This is
+ * how we know they are (domain) "root" devices. All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct asd_sas_port *port)
+{
+ struct asd_sas_phy *phy;
+ struct sas_rphy *rphy;
+ struct domain_device *dev;
+ int rc = -ENODEV;
+
+ dev = sas_alloc_device();
+ if (!dev)
+ return -ENOMEM;
+
+ spin_lock_irq(&port->phy_list_lock);
+ if (list_empty(&port->phy_list)) {
+ spin_unlock_irq(&port->phy_list_lock);
+ sas_put_device(dev);
+ return -ENODEV;
+ }
+ phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el);
+ spin_lock(&phy->frame_rcvd_lock);
+ memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+ (size_t)phy->frame_rcvd_size));
+ spin_unlock(&phy->frame_rcvd_lock);
+ spin_unlock_irq(&port->phy_list_lock);
+
+ if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+ if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+ fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+ && (fis->device & ~0x10) == 0)
+ dev->dev_type = SAS_SATA_PM;
+ else
+ dev->dev_type = SAS_SATA_DEV;
+ dev->tproto = SAS_PROTOCOL_SATA;
+ } else {
+ struct sas_identify_frame *id =
+ (struct sas_identify_frame *) dev->frame_rcvd;
+ dev->dev_type = id->dev_type;
+ dev->iproto = id->initiator_bits;
+ dev->tproto = id->target_bits;
+ }
+
+ sas_init_dev(dev);
+
+ dev->port = port;
+ switch (dev->dev_type) {
+ case SAS_SATA_DEV:
+ rc = sas_ata_init(dev);
+ if (rc) {
+ rphy = NULL;
+ break;
+ }
+ /* fall through */
+ case SAS_END_DEVICE:
+ rphy = sas_end_device_alloc(port->port);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(port->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(port->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ default:
+ printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+ rphy = NULL;
+ break;
+ }
+
+ if (!rphy) {
+ sas_put_device(dev);
+ return rc;
+ }
+
+ rphy->identify.phy_identifier = phy->phy->identify.phy_identifier;
+ memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_fill_in_rphy(dev, rphy);
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ port->port_dev = dev;
+ dev->linkrate = port->linkrate;
+ dev->min_linkrate = port->linkrate;
+ dev->max_linkrate = port->linkrate;
+ dev->pathways = port->num_phys;
+ memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+ port->disc.max_level = 0;
+ sas_device_set_phy(dev, port->port);
+
+ dev->rphy = rphy;
+ get_device(&dev->rphy->dev);
+
+ if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEVICE)
+ list_add_tail(&dev->disco_list_node, &port->disco_list);
+ else {
+ spin_lock_irq(&port->dev_list_lock);
+ list_add_tail(&dev->dev_list_node, &port->dev_list);
+ spin_unlock_irq(&port->dev_list_lock);
+ }
+
+ spin_lock_irq(&port->phy_list_lock);
+ list_for_each_entry(phy, &port->phy_list, port_phy_el)
+ sas_phy_set_target(phy, dev);
+ spin_unlock_irq(&port->phy_list_lock);
+
+ return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (!i->dft->lldd_dev_found)
+ return 0;
+
+ res = i->dft->lldd_dev_found(dev);
+ if (res) {
+ printk("sas: driver on pcidev %s cannot handle "
+ "device %llx, error:%d\n",
+ dev_name(sas_ha->dev),
+ SAS_ADDR(dev->sas_addr), res);
+ }
+ set_bit(SAS_DEV_FOUND, &dev->state);
+ kref_get(&dev->kref);
+ return res;
+}
+
+
+void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (!i->dft->lldd_dev_gone)
+ return;
+
+ if (test_and_clear_bit(SAS_DEV_FOUND, &dev->state)) {
+ i->dft->lldd_dev_gone(dev);
+ sas_put_device(dev);
+ }
+}
+
+static void sas_probe_devices(struct asd_sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ /* devices must be domain members before link recovery and probe */
+ list_for_each_entry(dev, &port->disco_list, disco_list_node) {
+ spin_lock_irq(&port->dev_list_lock);
+ list_add_tail(&dev->dev_list_node, &port->dev_list);
+ spin_unlock_irq(&port->dev_list_lock);
+ }
+
+ sas_probe_sata(port);
+
+ list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
+ int err;
+
+ err = sas_rphy_add(dev->rphy);
+ if (err)
+ sas_fail_probe(dev, __func__, err);
+ else
+ list_del_init(&dev->disco_list_node);
+ }
+}
+
+static void sas_suspend_devices(struct work_struct *work)
+{
+ struct asd_sas_phy *phy;
+ struct domain_device *dev;
+ struct sas_discovery_event *ev = to_sas_discovery_event(work);
+ struct asd_sas_port *port = ev->port;
+ struct Scsi_Host *shost = port->ha->core.shost;
+ struct sas_internal *si = to_sas_internal(shost->transportt);
+
+ clear_bit(DISCE_SUSPEND, &port->disc.pending);
+
+ sas_suspend_sata(port);
+
+ /* lldd is free to forget the domain_device across the
+ * suspension, we force the issue here to keep the reference
+ * counts aligned
+ */
+ list_for_each_entry(dev, &port->dev_list, dev_list_node)
+ sas_notify_lldd_dev_gone(dev);
+
+ /* we are suspending, so we know events are disabled and
+ * phy_list is not being mutated
+ */
+ list_for_each_entry(phy, &port->phy_list, port_phy_el) {
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_deformed(phy);
+ phy->suspended = 1;
+ port->suspended = 1;
+ }
+}
+
+static void sas_resume_devices(struct work_struct *work)
+{
+ struct sas_discovery_event *ev = to_sas_discovery_event(work);
+ struct asd_sas_port *port = ev->port;
+
+ clear_bit(DISCE_RESUME, &port->disc.pending);
+
+ sas_resume_sata(port);
+}
+
+/**
+ * sas_discover_end_dev - discover an end device (SSP, etc)
+ * @dev: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ return 0;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+void sas_free_device(struct kref *kref)
+{
+ struct domain_device *dev = container_of(kref, typeof(*dev), kref);
+
+ put_device(&dev->rphy->dev);
+ dev->rphy = NULL;
+
+ if (dev->parent)
+ sas_put_device(dev->parent);
+
+ sas_port_put_phy(dev->phy);
+ dev->phy = NULL;
+
+ /* remove the phys and ports, everything else should be gone */
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ kfree(dev->ex_dev.ex_phy);
+
+ if (dev_is_sata(dev) && dev->sata_dev.ap) {
+ ata_sas_tport_delete(dev->sata_dev.ap);
+ ata_sas_port_destroy(dev->sata_dev.ap);
+ ata_host_put(dev->sata_dev.ata_host);
+ dev->sata_dev.ata_host = NULL;
+ dev->sata_dev.ap = NULL;
+ }
+
+ kfree(dev);
+}
+
+static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_device *dev)
+{
+ struct sas_ha_struct *ha = port->ha;
+
+ sas_notify_lldd_dev_gone(dev);
+ if (!dev->parent)
+ dev->port->port_dev = NULL;
+ else
+ list_del_init(&dev->siblings);
+
+ spin_lock_irq(&port->dev_list_lock);
+ list_del_init(&dev->dev_list_node);
+ if (dev_is_sata(dev))
+ sas_ata_end_eh(dev->sata_dev.ap);
+ spin_unlock_irq(&port->dev_list_lock);
+
+ spin_lock_irq(&ha->lock);
+ if (dev->dev_type == SAS_END_DEVICE &&
+ !list_empty(&dev->ssp_dev.eh_list_node)) {
+ list_del_init(&dev->ssp_dev.eh_list_node);
+ ha->eh_active--;
+ }
+ spin_unlock_irq(&ha->lock);
+
+ sas_put_device(dev);
+}
+
+void sas_destruct_devices(struct asd_sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_safe(dev, n, &port->destroy_list, disco_list_node) {
+ list_del_init(&dev->disco_list_node);
+
+ sas_remove_children(&dev->rphy->dev);
+ sas_rphy_delete(dev->rphy);
+ sas_unregister_common_dev(port, dev);
+ }
+}
+
+static void sas_destruct_ports(struct asd_sas_port *port)
+{
+ struct sas_port *sas_port, *p;
+
+ list_for_each_entry_safe(sas_port, p, &port->sas_port_del_list, del_list) {
+ list_del_init(&sas_port->del_list);
+ sas_port_delete(sas_port);
+ }
+}
+
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev)
+{
+ if (!test_bit(SAS_DEV_DESTROY, &dev->state) &&
+ !list_empty(&dev->disco_list_node)) {
+ /* this rphy never saw sas_rphy_add */
+ list_del_init(&dev->disco_list_node);
+ sas_rphy_free(dev->rphy);
+ sas_unregister_common_dev(port, dev);
+ return;
+ }
+
+ if (!test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) {
+ sas_rphy_unlink(dev->rphy);
+ list_move_tail(&dev->disco_list_node, &port->destroy_list);
+ }
+}
+
+void sas_unregister_domain_devices(struct asd_sas_port *port, int gone)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node) {
+ if (gone)
+ set_bit(SAS_DEV_GONE, &dev->state);
+ sas_unregister_dev(port, dev);
+ }
+
+ list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node)
+ sas_unregister_dev(port, dev);
+
+ port->port->rphy = NULL;
+
+}
+
+void sas_device_set_phy(struct domain_device *dev, struct sas_port *port)
+{
+ struct sas_ha_struct *ha;
+ struct sas_phy *new_phy;
+
+ if (!dev)
+ return;
+
+ ha = dev->port->ha;
+ new_phy = sas_port_get_phy(port);
+
+ /* pin and record last seen phy */
+ spin_lock_irq(&ha->phy_port_lock);
+ if (new_phy) {
+ sas_port_put_phy(dev->phy);
+ dev->phy = new_phy;
+ }
+ spin_unlock_irq(&ha->phy_port_lock);
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain - discover the domain
+ * @work: work structure embedded in port domain device.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static void sas_discover_domain(struct work_struct *work)
+{
+ struct domain_device *dev;
+ int error = 0;
+ struct sas_discovery_event *ev = to_sas_discovery_event(work);
+ struct asd_sas_port *port = ev->port;
+
+ clear_bit(DISCE_DISCOVER_DOMAIN, &port->disc.pending);
+
+ if (port->port_dev)
+ return;
+
+ error = sas_get_port_device(port);
+ if (error)
+ return;
+ dev = port->port_dev;
+
+ SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+ task_pid_nr(current));
+
+ switch (dev->dev_type) {
+ case SAS_END_DEVICE:
+ error = sas_discover_end_dev(dev);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ error = sas_discover_root_expander(dev);
+ break;
+ case SAS_SATA_DEV:
+ case SAS_SATA_PM:
+#ifdef CONFIG_SCSI_SAS_ATA
+ error = sas_discover_sata(dev);
+ break;
+#else
+ SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+ /* Fall through */
+#endif
+ default:
+ error = -ENXIO;
+ SAS_DPRINTK("unhandled device %d\n", dev->dev_type);
+ break;
+ }
+
+ if (error) {
+ sas_rphy_free(dev->rphy);
+ list_del_init(&dev->disco_list_node);
+ spin_lock_irq(&port->dev_list_lock);
+ list_del_init(&dev->dev_list_node);
+ spin_unlock_irq(&port->dev_list_lock);
+
+ sas_put_device(dev);
+ port->port_dev = NULL;
+ }
+
+ sas_probe_devices(port);
+
+ SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+ task_pid_nr(current), error);
+}
+
+static void sas_revalidate_domain(struct work_struct *work)
+{
+ int res = 0;
+ struct sas_discovery_event *ev = to_sas_discovery_event(work);
+ struct asd_sas_port *port = ev->port;
+ struct sas_ha_struct *ha = port->ha;
+ struct domain_device *ddev = port->port_dev;
+
+ /* prevent revalidation from finding sata links in recovery */
+ mutex_lock(&ha->disco_mutex);
+ if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
+ SAS_DPRINTK("REVALIDATION DEFERRED on port %d, pid:%d\n",
+ port->id, task_pid_nr(current));
+ goto out;
+ }
+
+ clear_bit(DISCE_REVALIDATE_DOMAIN, &port->disc.pending);
+
+ SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+ task_pid_nr(current));
+
+ if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+ ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+ res = sas_ex_revalidate_domain(ddev);
+
+ SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+ port->id, task_pid_nr(current), res);
+ out:
+ mutex_unlock(&ha->disco_mutex);
+
+ sas_destruct_devices(port);
+ sas_destruct_ports(port);
+ sas_probe_devices(port);
+}
+
+/* ---------- Events ---------- */
+
+static void sas_chain_work(struct sas_ha_struct *ha, struct sas_work *sw)
+{
+ /* chained work is not subject to SA_HA_DRAINING or
+ * SAS_HA_REGISTERED, because it is either submitted in the
+ * workqueue, or known to be submitted from a context that is
+ * not racing against draining
+ */
+ queue_work(ha->disco_q, &sw->work);
+}
+
+static void sas_chain_event(int event, unsigned long *pending,
+ struct sas_work *sw,
+ struct sas_ha_struct *ha)
+{
+ if (!test_and_set_bit(event, pending)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->lock, flags);
+ sas_chain_work(ha, sw);
+ spin_unlock_irqrestore(&ha->lock, flags);
+ }
+}
+
+int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
+{
+ struct sas_discovery *disc;
+
+ if (!port)
+ return 0;
+ disc = &port->disc;
+
+ BUG_ON(ev >= DISC_NUM_EVENTS);
+
+ sas_chain_event(ev, &disc->pending, &disc->disc_work[ev].work, port->ha);
+
+ return 0;
+}
+
+/**
+ * sas_init_disc - initialize the discovery struct in the port
+ * @disc: port discovery structure
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
+{
+ int i;
+
+ static const work_func_t sas_event_fns[DISC_NUM_EVENTS] = {
+ [DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
+ [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
+ [DISCE_SUSPEND] = sas_suspend_devices,
+ [DISCE_RESUME] = sas_resume_devices,
+ };
+
+ disc->pending = 0;
+ for (i = 0; i < DISC_NUM_EVENTS; i++) {
+ INIT_SAS_WORK(&disc->disc_work[i].work, sas_event_fns[i]);
+ disc->disc_work[i].port = port;
+ }
+}
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
new file mode 100644
index 0000000..7e5d262
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -0,0 +1,63 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_dump.h"
+
+static const char *sas_porte_str[] = {
+ [0] = "PORTE_BYTES_DMAED",
+ [1] = "PORTE_BROADCAST_RCVD",
+ [2] = "PORTE_LINK_RESET_ERR",
+ [3] = "PORTE_TIMER_EVENT",
+ [4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+ [0] = "PHYE_LOSS_OF_SIGNAL",
+ [1] = "PHYE_OOB_DONE",
+ [2] = "PHYE_OOB_ERROR",
+ [3] = "PHYE_SPINUP_HOLD",
+ [4] = "PHYE_RESUME_TIMEOUT",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+ SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+ SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dump_port(struct asd_sas_port *port)
+{
+ SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+ SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->sas_addr));
+ SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->attached_sas_addr));
+ SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+ SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+ SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+ SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
new file mode 100644
index 0000000..6aaee6b
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -0,0 +1,29 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dump_port(struct asd_sas_port *port);
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
new file mode 100644
index 0000000..ae923eb
--- /dev/null
+++ b/drivers/scsi/libsas/sas_event.c
@@ -0,0 +1,199 @@
+/*
+ * Serial Attached SCSI (SAS) Event processing
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/export.h>
+#include <scsi/scsi_host.h>
+#include "sas_internal.h"
+#include "sas_dump.h"
+
+int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw)
+{
+ /* it's added to the defer_q when draining so return succeed */
+ int rc = 1;
+
+ if (!test_bit(SAS_HA_REGISTERED, &ha->state))
+ return 0;
+
+ if (test_bit(SAS_HA_DRAINING, &ha->state)) {
+ /* add it to the defer list, if not already pending */
+ if (list_empty(&sw->drain_node))
+ list_add_tail(&sw->drain_node, &ha->defer_q);
+ } else
+ rc = queue_work(ha->event_q, &sw->work);
+
+ return rc;
+}
+
+static int sas_queue_event(int event, struct sas_work *work,
+ struct sas_ha_struct *ha)
+{
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&ha->lock, flags);
+ rc = sas_queue_work(ha, work);
+ spin_unlock_irqrestore(&ha->lock, flags);
+
+ return rc;
+}
+
+
+void __sas_drain_work(struct sas_ha_struct *ha)
+{
+ struct sas_work *sw, *_sw;
+ int ret;
+
+ set_bit(SAS_HA_DRAINING, &ha->state);
+ /* flush submitters */
+ spin_lock_irq(&ha->lock);
+ spin_unlock_irq(&ha->lock);
+
+ drain_workqueue(ha->event_q);
+ drain_workqueue(ha->disco_q);
+
+ spin_lock_irq(&ha->lock);
+ clear_bit(SAS_HA_DRAINING, &ha->state);
+ list_for_each_entry_safe(sw, _sw, &ha->defer_q, drain_node) {
+ list_del_init(&sw->drain_node);
+ ret = sas_queue_work(ha, sw);
+ if (ret != 1)
+ sas_free_event(to_asd_sas_event(&sw->work));
+
+ }
+ spin_unlock_irq(&ha->lock);
+}
+
+int sas_drain_work(struct sas_ha_struct *ha)
+{
+ int err;
+
+ err = mutex_lock_interruptible(&ha->drain_mutex);
+ if (err)
+ return err;
+ if (test_bit(SAS_HA_REGISTERED, &ha->state))
+ __sas_drain_work(ha);
+ mutex_unlock(&ha->drain_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sas_drain_work);
+
+void sas_disable_revalidation(struct sas_ha_struct *ha)
+{
+ mutex_lock(&ha->disco_mutex);
+ set_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state);
+ mutex_unlock(&ha->disco_mutex);
+}
+
+void sas_enable_revalidation(struct sas_ha_struct *ha)
+{
+ int i;
+
+ mutex_lock(&ha->disco_mutex);
+ clear_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_port *port = ha->sas_port[i];
+ const int ev = DISCE_REVALIDATE_DOMAIN;
+ struct sas_discovery *d = &port->disc;
+ struct asd_sas_phy *sas_phy;
+
+ if (!test_and_clear_bit(ev, &d->pending))
+ continue;
+
+ if (list_empty(&port->phy_list))
+ continue;
+
+ sas_phy = container_of(port->phy_list.next, struct asd_sas_phy,
+ port_phy_el);
+ ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ }
+ mutex_unlock(&ha->disco_mutex);
+}
+
+
+static void sas_port_event_worker(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+
+ sas_port_event_fns[ev->event](work);
+ sas_free_event(ev);
+}
+
+static void sas_phy_event_worker(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+
+ sas_phy_event_fns[ev->event](work);
+ sas_free_event(ev);
+}
+
+static int sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+{
+ struct asd_sas_event *ev;
+ struct sas_ha_struct *ha = phy->ha;
+ int ret;
+
+ BUG_ON(event >= PORT_NUM_EVENTS);
+
+ ev = sas_alloc_event(phy);
+ if (!ev)
+ return -ENOMEM;
+
+ INIT_SAS_EVENT(ev, sas_port_event_worker, phy, event);
+
+ ret = sas_queue_event(event, &ev->work, ha);
+ if (ret != 1)
+ sas_free_event(ev);
+
+ return ret;
+}
+
+int sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+{
+ struct asd_sas_event *ev;
+ struct sas_ha_struct *ha = phy->ha;
+ int ret;
+
+ BUG_ON(event >= PHY_NUM_EVENTS);
+
+ ev = sas_alloc_event(phy);
+ if (!ev)
+ return -ENOMEM;
+
+ INIT_SAS_EVENT(ev, sas_phy_event_worker, phy, event);
+
+ ret = sas_queue_event(event, &ev->work, ha);
+ if (ret != 1)
+ sas_free_event(ev);
+
+ return ret;
+}
+
+int sas_init_events(struct sas_ha_struct *sas_ha)
+{
+ sas_ha->notify_port_event = sas_notify_port_event;
+ sas_ha->notify_phy_event = sas_notify_phy_event;
+
+ return 0;
+}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
new file mode 100644
index 0000000..fadc99c
--- /dev/null
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -0,0 +1,2191 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+
+#include "sas_internal.h"
+
+#include <scsi/sas_ata.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static int sas_discover_expander(struct domain_device *dev);
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include);
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr);
+
+/* ---------- SMP task management ---------- */
+
+static void smp_task_timedout(struct timer_list *t)
+{
+ struct sas_task_slow *slow = from_timer(slow, t, timer);
+ struct sas_task *task = slow->task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->slow_task->completion);
+}
+
+static void smp_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->slow_task->timer))
+ return;
+ complete(&task->slow_task->completion);
+}
+
+/* Give it some long enough timeout. In seconds. */
+#define SMP_TIMEOUT 10
+
+static int smp_execute_task_sg(struct domain_device *dev,
+ struct scatterlist *req, struct scatterlist *resp)
+{
+ int res, retry;
+ struct sas_task *task = NULL;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ mutex_lock(&dev->ex_dev.cmd_mutex);
+ for (retry = 0; retry < 3; retry++) {
+ if (test_bit(SAS_DEV_GONE, &dev->state)) {
+ res = -ECOMM;
+ break;
+ }
+
+ task = sas_alloc_slow_task(GFP_KERNEL);
+ if (!task) {
+ res = -ENOMEM;
+ break;
+ }
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ task->smp_task.smp_req = *req;
+ task->smp_task.smp_resp = *resp;
+
+ task->task_done = smp_task_done;
+
+ task->slow_task->timer.function = smp_task_timedout;
+ task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+ add_timer(&task->slow_task->timer);
+
+ res = i->dft->lldd_execute_task(task, GFP_KERNEL);
+
+ if (res) {
+ del_timer(&task->slow_task->timer);
+ SAS_DPRINTK("executing SMP task failed:%d\n", res);
+ break;
+ }
+
+ wait_for_completion(&task->slow_task->completion);
+ res = -ECOMM;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ SAS_DPRINTK("smp task timed out or aborted\n");
+ i->dft->lldd_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ SAS_DPRINTK("SMP task aborted and not done\n");
+ break;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_STAT_GOOD) {
+ res = 0;
+ break;
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun */
+ res = task->task_status.residual;
+ break;
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ res = -EMSGSIZE;
+ break;
+ }
+ if (task->task_status.resp == SAS_TASK_UNDELIVERED &&
+ task->task_status.stat == SAS_DEVICE_UNKNOWN)
+ break;
+ else {
+ SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __func__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
+ }
+ mutex_unlock(&dev->ex_dev.cmd_mutex);
+
+ BUG_ON(retry == 3 && task != NULL);
+ sas_free_task(task);
+ return res;
+}
+
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+ void *resp, int resp_size)
+{
+ struct scatterlist req_sg;
+ struct scatterlist resp_sg;
+
+ sg_init_one(&req_sg, req, req_size);
+ sg_init_one(&resp_sg, resp, resp_size);
+ return smp_execute_task_sg(dev, &req_sg, &resp_sg);
+}
+
+/* ---------- Allocations ---------- */
+
+static inline void *alloc_smp_req(int size)
+{
+ u8 *p = kzalloc(size, GFP_KERNEL);
+ if (p)
+ p[0] = SMP_REQUEST;
+ return p;
+}
+
+static inline void *alloc_smp_resp(int size)
+{
+ return kzalloc(size, GFP_KERNEL);
+}
+
+static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
+{
+ switch (phy->routing_attr) {
+ case TABLE_ROUTING:
+ if (dev->ex_dev.t2t_supp)
+ return 'U';
+ else
+ return 'T';
+ case DIRECT_ROUTING:
+ return 'D';
+ case SUBTRACTIVE_ROUTING:
+ return 'S';
+ default:
+ return '?';
+ }
+}
+
+static enum sas_device_type to_dev_type(struct discover_resp *dr)
+{
+ /* This is detecting a failure to transmit initial dev to host
+ * FIS as described in section J.5 of sas-2 r16
+ */
+ if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
+ dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
+ return SAS_SATA_PENDING;
+ else
+ return dr->attached_dev_type;
+}
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
+{
+ enum sas_device_type dev_type;
+ enum sas_linkrate linkrate;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ struct smp_resp *resp = rsp;
+ struct discover_resp *dr = &resp->disc;
+ struct sas_ha_struct *ha = dev->port->ha;
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ struct sas_rphy *rphy = dev->rphy;
+ bool new_phy = !phy->phy;
+ char *type;
+
+ if (new_phy) {
+ if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)))
+ return;
+ phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
+
+ /* FIXME: error_handling */
+ BUG_ON(!phy->phy);
+ }
+
+ switch (resp->result) {
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ break;
+ default:
+ phy->phy_state = PHY_NOT_PRESENT;
+ break;
+ case SMP_RESP_FUNC_ACC:
+ phy->phy_state = PHY_EMPTY; /* do not know yet */
+ break;
+ }
+
+ /* check if anything important changed to squelch debug */
+ dev_type = phy->attached_dev_type;
+ linkrate = phy->linkrate;
+ memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+
+ /* Handle vacant phy - rest of dr data is not valid so skip it */
+ if (phy->phy_state == PHY_VACANT) {
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ phy->attached_dev_type = SAS_PHY_UNUSED;
+ if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
+ phy->phy_id = phy_id;
+ goto skip;
+ } else
+ goto out;
+ }
+
+ phy->attached_dev_type = to_dev_type(dr);
+ if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
+ goto out;
+ phy->phy_id = phy_id;
+ phy->linkrate = dr->linkrate;
+ phy->attached_sata_host = dr->attached_sata_host;
+ phy->attached_sata_dev = dr->attached_sata_dev;
+ phy->attached_sata_ps = dr->attached_sata_ps;
+ phy->attached_iproto = dr->iproto << 1;
+ phy->attached_tproto = dr->tproto << 1;
+ /* help some expanders that fail to zero sas_address in the 'no
+ * device' case
+ */
+ if (phy->attached_dev_type == SAS_PHY_UNUSED ||
+ phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ else
+ memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+ phy->attached_phy_id = dr->attached_phy_id;
+ phy->phy_change_count = dr->change_count;
+ phy->routing_attr = dr->routing_attr;
+ phy->virtual = dr->virtual;
+ phy->last_da_index = -1;
+
+ phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
+ phy->phy->identify.device_type = dr->attached_dev_type;
+ phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
+ phy->phy->identify.target_port_protocols = phy->attached_tproto;
+ if (!phy->attached_tproto && dr->attached_sata_dev)
+ phy->phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->phy->identify.phy_identifier = phy_id;
+ phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
+ phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
+ phy->phy->minimum_linkrate = dr->pmin_linkrate;
+ phy->phy->maximum_linkrate = dr->pmax_linkrate;
+ phy->phy->negotiated_linkrate = phy->linkrate;
+ phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
+
+ skip:
+ if (new_phy)
+ if (sas_phy_add(phy->phy)) {
+ sas_phy_free(phy->phy);
+ return;
+ }
+
+ out:
+ switch (phy->attached_dev_type) {
+ case SAS_SATA_PENDING:
+ type = "stp pending";
+ break;
+ case SAS_PHY_UNUSED:
+ type = "no device";
+ break;
+ case SAS_END_DEVICE:
+ if (phy->attached_iproto) {
+ if (phy->attached_tproto)
+ type = "host+target";
+ else
+ type = "host";
+ } else {
+ if (dr->attached_sata_dev)
+ type = "stp";
+ else
+ type = "ssp";
+ }
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ type = "smp";
+ break;
+ default:
+ type = "unknown";
+ }
+
+ /* this routine is polled by libata error recovery so filter
+ * unimportant messages
+ */
+ if (new_phy || phy->attached_dev_type != dev_type ||
+ phy->linkrate != linkrate ||
+ SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr))
+ /* pass */;
+ else
+ return;
+
+ /* if the attached device type changed and ata_eh is active,
+ * make sure we run revalidation when eh completes (see:
+ * sas_enable_revalidation)
+ */
+ if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
+ set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending);
+
+ SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
+ test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "",
+ SAS_ADDR(dev->sas_addr), phy->phy_id,
+ sas_route_char(dev, phy), phy->linkrate,
+ SAS_ADDR(phy->attached_sas_addr), type);
+}
+
+/* check if we have an existing attached ata device on this expander phy */
+struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
+{
+ struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id];
+ struct domain_device *dev;
+ struct sas_rphy *rphy;
+
+ if (!ex_phy->port)
+ return NULL;
+
+ rphy = ex_phy->port->rphy;
+ if (!rphy)
+ return NULL;
+
+ dev = sas_find_dev_by_rphy(rphy);
+
+ if (dev && dev_is_sata(dev))
+ return dev;
+
+ return NULL;
+}
+
+#define DISCOVER_REQ_SIZE 16
+#define DISCOVER_RESP_SIZE 56
+
+static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
+ u8 *disc_resp, int single)
+{
+ struct discover_resp *dr;
+ int res;
+
+ disc_req[9] = single;
+
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ return res;
+ dr = &((struct smp_resp *)disc_resp)->disc;
+ if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
+ sas_printk("Found loopback topology, just ignore it!\n");
+ return 0;
+ }
+ sas_set_ex_phy(dev, single, disc_resp);
+ return 0;
+}
+
+int sas_ex_phy_discover(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ u8 *disc_req;
+ u8 *disc_resp;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp) {
+ kfree(disc_req);
+ return -ENOMEM;
+ }
+
+ disc_req[1] = SMP_DISCOVER;
+
+ if (0 <= single && single < ex->num_phys) {
+ res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single);
+ } else {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ res = sas_ex_phy_discover_helper(dev, disc_req,
+ disc_resp, i);
+ if (res)
+ goto out_err;
+ }
+ }
+out_err:
+ kfree(disc_resp);
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_expander_discover(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = -ENOMEM;
+
+ ex->ex_phy = kcalloc(ex->num_phys, sizeof(*ex->ex_phy), GFP_KERNEL);
+ if (!ex->ex_phy)
+ return -ENOMEM;
+
+ res = sas_ex_phy_discover(dev, -1);
+ if (res)
+ goto out_err;
+
+ return 0;
+ out_err:
+ kfree(ex->ex_phy);
+ ex->ex_phy = NULL;
+ return res;
+}
+
+#define MAX_EXPANDER_PHYS 128
+
+static void ex_assign_report_general(struct domain_device *dev,
+ struct smp_resp *resp)
+{
+ struct report_general_resp *rg = &resp->rg;
+
+ dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
+ dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
+ dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.t2t_supp = rg->t2t_supp;
+ dev->ex_dev.conf_route_table = rg->conf_route_table;
+ dev->ex_dev.configuring = rg->configuring;
+ memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
+}
+
+#define RG_REQ_SIZE 8
+#define RG_RESP_SIZE 32
+
+static int sas_ex_general(struct domain_device *dev)
+{
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+ int res;
+ int i;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ for (i = 0; i < 5; i++) {
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+
+ if (res) {
+ SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), rg_resp->result);
+ res = rg_resp->result;
+ goto out;
+ }
+
+ ex_assign_report_general(dev, rg_resp);
+
+ if (dev->ex_dev.configuring) {
+ SAS_DPRINTK("RG: ex %llx self-configuring...\n",
+ SAS_ADDR(dev->sas_addr));
+ schedule_timeout_interruptible(5*HZ);
+ } else
+ break;
+ }
+out:
+ kfree(rg_req);
+ kfree(rg_resp);
+ return res;
+}
+
+static void ex_assign_manuf_info(struct domain_device *dev, void
+ *_mi_resp)
+{
+ u8 *mi_resp = _mi_resp;
+ struct sas_rphy *rphy = dev->rphy;
+ struct sas_expander_device *edev = rphy_to_expander_device(rphy);
+
+ memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
+ memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
+ memcpy(edev->product_rev, mi_resp + 36,
+ SAS_EXPANDER_PRODUCT_REV_LEN);
+
+ if (mi_resp[8] & 1) {
+ memcpy(edev->component_vendor_id, mi_resp + 40,
+ SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+ edev->component_id = mi_resp[48] << 8 | mi_resp[49];
+ edev->component_revision_id = mi_resp[50];
+ }
+}
+
+#define MI_REQ_SIZE 8
+#define MI_RESP_SIZE 64
+
+static int sas_ex_manuf_info(struct domain_device *dev)
+{
+ u8 *mi_req;
+ u8 *mi_resp;
+ int res;
+
+ mi_req = alloc_smp_req(MI_REQ_SIZE);
+ if (!mi_req)
+ return -ENOMEM;
+
+ mi_resp = alloc_smp_resp(MI_RESP_SIZE);
+ if (!mi_resp) {
+ kfree(mi_req);
+ return -ENOMEM;
+ }
+
+ mi_req[1] = SMP_REPORT_MANUF_INFO;
+
+ res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
+ if (res) {
+ SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), mi_resp[2]);
+ goto out;
+ }
+
+ ex_assign_manuf_info(dev, mi_resp);
+out:
+ kfree(mi_req);
+ kfree(mi_resp);
+ return res;
+}
+
+#define PC_REQ_SIZE 44
+#define PC_RESP_SIZE 8
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func,
+ struct sas_phy_linkrates *rates)
+{
+ u8 *pc_req;
+ u8 *pc_resp;
+ int res;
+
+ pc_req = alloc_smp_req(PC_REQ_SIZE);
+ if (!pc_req)
+ return -ENOMEM;
+
+ pc_resp = alloc_smp_resp(PC_RESP_SIZE);
+ if (!pc_resp) {
+ kfree(pc_req);
+ return -ENOMEM;
+ }
+
+ pc_req[1] = SMP_PHY_CONTROL;
+ pc_req[9] = phy_id;
+ pc_req[10]= phy_func;
+ if (rates) {
+ pc_req[32] = rates->minimum_linkrate << 4;
+ pc_req[33] = rates->maximum_linkrate << 4;
+ }
+
+ res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
+
+ kfree(pc_resp);
+ kfree(pc_req);
+ return res;
+}
+
+static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+ sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
+ phy->linkrate = SAS_PHY_DISABLED;
+}
+
+static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
+ sas_ex_disable_phy(dev, i);
+ }
+}
+
+static int sas_dev_present_in_domain(struct asd_sas_port *port,
+ u8 *sas_addr)
+{
+ struct domain_device *dev;
+
+ if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ }
+ return 0;
+}
+
+#define RPEL_REQ_SIZE 16
+#define RPEL_RESP_SIZE 32
+int sas_smp_get_phy_events(struct sas_phy *phy)
+{
+ int res;
+ u8 *req;
+ u8 *resp;
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *dev = sas_find_dev_by_rphy(rphy);
+
+ req = alloc_smp_req(RPEL_REQ_SIZE);
+ if (!req)
+ return -ENOMEM;
+
+ resp = alloc_smp_resp(RPEL_RESP_SIZE);
+ if (!resp) {
+ kfree(req);
+ return -ENOMEM;
+ }
+
+ req[1] = SMP_REPORT_PHY_ERR_LOG;
+ req[9] = phy->number;
+
+ res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
+ resp, RPEL_RESP_SIZE);
+
+ if (res)
+ goto out;
+
+ phy->invalid_dword_count = scsi_to_u32(&resp[12]);
+ phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
+ phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
+ phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+
+ out:
+ kfree(req);
+ kfree(resp);
+ return res;
+
+}
+
+#ifdef CONFIG_SCSI_SAS_ATA
+
+#define RPS_REQ_SIZE 16
+#define RPS_RESP_SIZE 60
+
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+ struct smp_resp *rps_resp)
+{
+ int res;
+ u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+ u8 *resp = (u8 *)rps_resp;
+
+ if (!rps_req)
+ return -ENOMEM;
+
+ rps_req[1] = SMP_REPORT_PHY_SATA;
+ rps_req[9] = phy_id;
+
+ res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
+ rps_resp, RPS_RESP_SIZE);
+
+ /* 0x34 is the FIS type for the D2H fis. There's a potential
+ * standards cockup here. sas-2 explicitly specifies the FIS
+ * should be encoded so that FIS type is in resp[24].
+ * However, some expanders endian reverse this. Undo the
+ * reversal here */
+ if (!res && resp[27] == 0x34 && resp[24] != 0x34) {
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ int j = 24 + (i*4);
+ u8 a, b;
+ a = resp[j + 0];
+ b = resp[j + 1];
+ resp[j + 0] = resp[j + 3];
+ resp[j + 1] = resp[j + 2];
+ resp[j + 2] = b;
+ resp[j + 3] = a;
+ }
+ }
+
+ kfree(rps_req);
+ return res;
+}
+#endif
+
+static void sas_ex_get_linkrate(struct domain_device *parent,
+ struct domain_device *child,
+ struct ex_phy *parent_phy)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct sas_port *port;
+ int i;
+
+ child->pathways = 0;
+
+ port = parent_phy->port;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *phy = &parent_ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr)) {
+
+ child->min_linkrate = min(parent->min_linkrate,
+ phy->linkrate);
+ child->max_linkrate = max(parent->max_linkrate,
+ phy->linkrate);
+ child->pathways++;
+ sas_port_add_phy(port, phy->phy);
+ }
+ }
+ child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
+ child->pathways = min(child->pathways, parent->pathways);
+}
+
+static struct domain_device *sas_ex_discover_end_dev(
+ struct domain_device *parent, int phy_id)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ int res;
+
+ if (phy->attached_sata_host || phy->attached_sata_ps)
+ return NULL;
+
+ child = sas_alloc_device();
+ if (!child)
+ return NULL;
+
+ kref_get(&parent->kref);
+ child->parent = parent;
+ child->port = parent->port;
+ child->iproto = phy->attached_iproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ if (!phy->port) {
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ if (unlikely(!phy->port))
+ goto out_err;
+ if (unlikely(sas_port_add(phy->port) != 0)) {
+ sas_port_free(phy->port);
+ goto out_err;
+ }
+ }
+ sas_ex_get_linkrate(parent, child, phy);
+ sas_device_set_phy(child, phy->port);
+
+#ifdef CONFIG_SCSI_SAS_ATA
+ if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
+ res = sas_get_ata_info(child, phy);
+ if (res)
+ goto out_free;
+
+ sas_init_dev(child);
+ res = sas_ata_init(child);
+ if (res)
+ goto out_free;
+ rphy = sas_end_device_alloc(phy->port);
+ if (!rphy)
+ goto out_free;
+
+ child->rphy = rphy;
+ get_device(&rphy->dev);
+
+ list_add_tail(&child->disco_list_node, &parent->port->disco_list);
+
+ res = sas_discover_sata(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_sata() for device %16llx at "
+ "%016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ goto out_list_del;
+ }
+ } else
+#endif
+ if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
+ child->dev_type = SAS_END_DEVICE;
+ rphy = sas_end_device_alloc(phy->port);
+ /* FIXME: error handling */
+ if (unlikely(!rphy))
+ goto out_free;
+ child->tproto = phy->attached_tproto;
+ sas_init_dev(child);
+
+ child->rphy = rphy;
+ get_device(&rphy->dev);
+ sas_fill_in_rphy(child, rphy);
+
+ list_add_tail(&child->disco_list_node, &parent->port->disco_list);
+
+ res = sas_discover_end_dev(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
+ "at %016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ goto out_list_del;
+ }
+ } else {
+ SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
+ phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+ phy_id);
+ goto out_free;
+ }
+
+ list_add_tail(&child->siblings, &parent_ex->children);
+ return child;
+
+ out_list_del:
+ sas_rphy_free(child->rphy);
+ list_del(&child->disco_list_node);
+ spin_lock_irq(&parent->port->dev_list_lock);
+ list_del(&child->dev_list_node);
+ spin_unlock_irq(&parent->port->dev_list_lock);
+ out_free:
+ sas_port_delete(phy->port);
+ out_err:
+ phy->port = NULL;
+ sas_put_device(child);
+ return NULL;
+}
+
+/* See if this phy is part of a wide port */
+static bool sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
+{
+ struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+ int i;
+
+ for (i = 0; i < parent->ex_dev.num_phys; i++) {
+ struct ex_phy *ephy = &parent->ex_dev.ex_phy[i];
+
+ if (ephy == phy)
+ continue;
+
+ if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
+ SAS_ADDR_SIZE) && ephy->port) {
+ sas_port_add_phy(ephy->port, phy->phy);
+ phy->port = ephy->port;
+ phy->phy_state = PHY_DEVICE_DISCOVERED;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static struct domain_device *sas_ex_discover_expander(
+ struct domain_device *parent, int phy_id)
+{
+ struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
+ struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ struct sas_expander_device *edev;
+ struct asd_sas_port *port;
+ int res;
+
+ if (phy->routing_attr == DIRECT_ROUTING) {
+ SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+ "allowed\n",
+ SAS_ADDR(parent->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr),
+ phy->attached_phy_id);
+ return NULL;
+ }
+ child = sas_alloc_device();
+ if (!child)
+ return NULL;
+
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ /* FIXME: better error handling */
+ BUG_ON(sas_port_add(phy->port) != 0);
+
+
+ switch (phy->attached_dev_type) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ default:
+ rphy = NULL; /* shut gcc up */
+ BUG();
+ }
+ port = parent->port;
+ child->rphy = rphy;
+ get_device(&rphy->dev);
+ edev = rphy_to_expander_device(rphy);
+ child->dev_type = phy->attached_dev_type;
+ kref_get(&parent->kref);
+ child->parent = parent;
+ child->port = port;
+ child->iproto = phy->attached_iproto;
+ child->tproto = phy->attached_tproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ sas_ex_get_linkrate(parent, child, phy);
+ edev->level = parent_ex->level + 1;
+ parent->port->disc.max_level = max(parent->port->disc.max_level,
+ edev->level);
+ sas_init_dev(child);
+ sas_fill_in_rphy(child, rphy);
+ sas_rphy_add(rphy);
+
+ spin_lock_irq(&parent->port->dev_list_lock);
+ list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+ spin_unlock_irq(&parent->port->dev_list_lock);
+
+ res = sas_discover_expander(child);
+ if (res) {
+ sas_rphy_delete(rphy);
+ spin_lock_irq(&parent->port->dev_list_lock);
+ list_del(&child->dev_list_node);
+ spin_unlock_irq(&parent->port->dev_list_lock);
+ sas_put_device(child);
+ return NULL;
+ }
+ list_add_tail(&child->siblings, &parent->ex_dev.children);
+ return child;
+}
+
+static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ int res = 0;
+
+ /* Phy state */
+ if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
+ if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ return res;
+ }
+
+ /* Parent and domain coherency */
+ if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->port->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ return 0;
+ }
+ if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->parent->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ if (ex_phy->routing_attr == TABLE_ROUTING)
+ sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
+ return 0;
+ }
+
+ if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
+ sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
+
+ if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
+ if (ex_phy->routing_attr == DIRECT_ROUTING) {
+ memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ }
+ return 0;
+ } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
+ return 0;
+
+ if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
+ ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_SATA_PENDING) {
+ SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
+ "phy 0x%x\n", ex_phy->attached_dev_type,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ return 0;
+ }
+
+ res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ if (res) {
+ SAS_DPRINTK("configure routing for dev %016llx "
+ "reported 0x%x. Forgotten\n",
+ SAS_ADDR(ex_phy->attached_sas_addr), res);
+ sas_disable_routing(dev, ex_phy->attached_sas_addr);
+ return res;
+ }
+
+ if (sas_ex_join_wide_port(dev, phy_id)) {
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
+ return res;
+ }
+
+ switch (ex_phy->attached_dev_type) {
+ case SAS_END_DEVICE:
+ case SAS_SATA_PENDING:
+ child = sas_ex_discover_end_dev(dev, phy_id);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
+ SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
+ "attached to ex %016llx phy 0x%x\n",
+ SAS_ADDR(ex_phy->attached_sas_addr),
+ ex_phy->attached_phy_id,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ sas_ex_disable_phy(dev, phy_id);
+ break;
+ } else
+ memcpy(dev->port->disc.fanout_sas_addr,
+ ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
+ /* fallthrough */
+ case SAS_EDGE_EXPANDER_DEVICE:
+ child = sas_ex_discover_expander(dev, phy_id);
+ break;
+ default:
+ break;
+ }
+
+ if (child) {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ if (ex->ex_phy[i].phy_state == PHY_VACANT ||
+ ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
+ continue;
+ /*
+ * Due to races, the phy might not get added to the
+ * wide port, so we add the phy to the wide port here.
+ */
+ if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr)) {
+ ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ if (sas_ex_join_wide_port(dev, i))
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
+
+ }
+ }
+ }
+
+ return res;
+}
+
+static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
+
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int sas_check_level_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child;
+ u8 sub_addr[8] = {0, };
+
+ list_for_each_entry(child, &ex->children, siblings) {
+ if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
+ continue;
+ if (sub_addr[0] == 0) {
+ sas_find_sub_addr(child, sub_addr);
+ continue;
+ } else {
+ u8 s2[8];
+
+ if (sas_find_sub_addr(child, s2) &&
+ (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
+
+ SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
+ "diverges from subtractive "
+ "boundary %016llx\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(s2),
+ SAS_ADDR(sub_addr));
+
+ sas_ex_disable_port(child, s2);
+ }
+ }
+ }
+ return 0;
+}
+/**
+ * sas_ex_discover_devices - discover devices attached to this expander
+ * @dev: pointer to the expander domain device
+ * @single: if you want to do a single phy, else set to -1;
+ *
+ * Configure this expander for use with its devices and register the
+ * devices of this expander.
+ */
+static int sas_ex_discover_devices(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, end = ex->num_phys;
+ int res = 0;
+
+ if (0 <= single && single < end) {
+ i = single;
+ end = i+1;
+ }
+
+ for ( ; i < end; i++) {
+ struct ex_phy *ex_phy = &ex->ex_phy[i];
+
+ if (ex_phy->phy_state == PHY_VACANT ||
+ ex_phy->phy_state == PHY_NOT_PRESENT ||
+ ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
+ continue;
+
+ switch (ex_phy->linkrate) {
+ case SAS_PHY_DISABLED:
+ case SAS_PHY_RESET_PROBLEM:
+ case SAS_SATA_PORT_SELECTOR:
+ continue;
+ default:
+ res = sas_ex_discover_dev(dev, i);
+ if (res)
+ break;
+ continue;
+ }
+ }
+
+ if (!res)
+ sas_check_level_subtractive_boundary(dev);
+
+ return res;
+}
+
+static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+ u8 *sub_sas_addr = NULL;
+
+ if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
+ return 0;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ if (!sub_sas_addr)
+ sub_sas_addr = &phy->attached_sas_addr[0];
+ else if (SAS_ADDR(sub_sas_addr) !=
+ SAS_ADDR(phy->attached_sas_addr)) {
+
+ SAS_DPRINTK("ex %016llx phy 0x%x "
+ "diverges(%016llx) on subtractive "
+ "boundary(%016llx). Disabled\n",
+ SAS_ADDR(dev->sas_addr), i,
+ SAS_ADDR(phy->attached_sas_addr),
+ SAS_ADDR(sub_sas_addr));
+ sas_ex_disable_phy(dev, i);
+ }
+ }
+ }
+ return 0;
+}
+
+static void sas_print_parent_topology_bug(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ static const char *ex_type[] = {
+ [SAS_EDGE_EXPANDER_DEVICE] = "edge",
+ [SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
+ };
+ struct domain_device *parent = child->parent;
+
+ sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx "
+ "phy 0x%x has %c:%c routing link!\n",
+
+ ex_type[parent->dev_type],
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+
+ ex_type[child->dev_type],
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+
+ sas_route_char(parent, parent_phy),
+ sas_route_char(child, child_phy));
+}
+
+static int sas_check_eeds(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ int res = 0;
+ struct domain_device *parent = child->parent;
+
+ if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+ "phy S:0x%x, while there is a fanout ex %016llx\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+ SAS_ADDR(parent->port->disc.fanout_sas_addr));
+ } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
+ memcpy(parent->port->disc.eeds_a, parent->sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(parent->port->disc.eeds_b, child->sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(child->sas_addr)))
+ &&
+ ((SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(child->sas_addr))))
+ ;
+ else {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+ "phy 0x%x link forms a third EEDS!\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id);
+ }
+
+ return res;
+}
+
+/* Here we spill over 80 columns. It is intentional.
+ */
+static int sas_check_parent_topology(struct domain_device *child)
+{
+ struct expander_device *child_ex = &child->ex_dev;
+ struct expander_device *parent_ex;
+ int i;
+ int res = 0;
+
+ if (!child->parent)
+ return 0;
+
+ if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
+ return 0;
+
+ parent_ex = &child->parent->ex_dev;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
+ struct ex_phy *child_phy;
+
+ if (parent_phy->phy_state == PHY_VACANT ||
+ parent_phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+ continue;
+
+ child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
+
+ switch (child->parent->dev_type) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
+ child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ res = sas_check_eeds(child, parent_phy, child_phy);
+ } else if (child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == TABLE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
+ (child_phy->routing_attr == TABLE_ROUTING &&
+ child_ex->t2t_supp && parent_ex->t2t_supp)) {
+ /* All good */;
+ } else {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ }
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ if (parent_phy->routing_attr != TABLE_ROUTING ||
+ child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return res;
+}
+
+#define RRI_REQ_SIZE 16
+#define RRI_RESP_SIZE 44
+
+static int sas_configure_present(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int *index, int *present)
+{
+ int i, res = 0;
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ u8 *rri_req;
+ u8 *rri_resp;
+
+ *present = 0;
+ *index = 0;
+
+ rri_req = alloc_smp_req(RRI_REQ_SIZE);
+ if (!rri_req)
+ return -ENOMEM;
+
+ rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
+ if (!rri_resp) {
+ kfree(rri_req);
+ return -ENOMEM;
+ }
+
+ rri_req[1] = SMP_REPORT_ROUTE_INFO;
+ rri_req[9] = phy_id;
+
+ for (i = 0; i < ex->max_route_indexes ; i++) {
+ *(__be16 *)(rri_req+6) = cpu_to_be16(i);
+ res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
+ RRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = rri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx "
+ "phy 0x%x index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, i);
+ goto out;
+ } else if (res != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
+ "result 0x%x\n", __func__,
+ SAS_ADDR(dev->sas_addr), phy_id, i, res);
+ goto out;
+ }
+ if (SAS_ADDR(sas_addr) != 0) {
+ if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
+ *index = i;
+ if ((rri_resp[12] & 0x80) == 0x80)
+ *present = 0;
+ else
+ *present = 1;
+ goto out;
+ } else if (SAS_ADDR(rri_resp+16) == 0) {
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ } else if (SAS_ADDR(rri_resp+16) == 0 &&
+ phy->last_da_index < i) {
+ phy->last_da_index = i;
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ }
+ res = -1;
+out:
+ kfree(rri_req);
+ kfree(rri_resp);
+ return res;
+}
+
+#define CRI_REQ_SIZE 44
+#define CRI_RESP_SIZE 8
+
+static int sas_configure_set(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int index, int include)
+{
+ int res;
+ u8 *cri_req;
+ u8 *cri_resp;
+
+ cri_req = alloc_smp_req(CRI_REQ_SIZE);
+ if (!cri_req)
+ return -ENOMEM;
+
+ cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
+ if (!cri_resp) {
+ kfree(cri_req);
+ return -ENOMEM;
+ }
+
+ cri_req[1] = SMP_CONF_ROUTE_INFO;
+ *(__be16 *)(cri_req+6) = cpu_to_be16(index);
+ cri_req[9] = phy_id;
+ if (SAS_ADDR(sas_addr) == 0 || !include)
+ cri_req[12] |= 0x80;
+ memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
+
+ res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
+ CRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = cri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
+ "index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, index);
+ }
+out:
+ kfree(cri_req);
+ kfree(cri_resp);
+ return res;
+}
+
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include)
+{
+ int index;
+ int present;
+ int res;
+
+ res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
+ if (res)
+ return res;
+ if (include ^ present)
+ return sas_configure_set(dev, phy_id, sas_addr, index,include);
+
+ return res;
+}
+
+/**
+ * sas_configure_parent - configure routing table of parent
+ * @parent: parent expander
+ * @child: child expander
+ * @sas_addr: SAS port identifier of device directly attached to child
+ * @include: whether or not to include @child in the expander routing table
+ */
+static int sas_configure_parent(struct domain_device *parent,
+ struct domain_device *child,
+ u8 *sas_addr, int include)
+{
+ struct expander_device *ex_parent = &parent->ex_dev;
+ int res = 0;
+ int i;
+
+ if (parent->parent) {
+ res = sas_configure_parent(parent->parent, parent, sas_addr,
+ include);
+ if (res)
+ return res;
+ }
+
+ if (ex_parent->conf_route_table == 0) {
+ SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
+ SAS_ADDR(parent->sas_addr));
+ return 0;
+ }
+
+ for (i = 0; i < ex_parent->num_phys; i++) {
+ struct ex_phy *phy = &ex_parent->ex_phy[i];
+
+ if ((phy->routing_attr == TABLE_ROUTING) &&
+ (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr))) {
+ res = sas_configure_phy(parent, i, sas_addr, include);
+ if (res)
+ return res;
+ }
+ }
+
+ return res;
+}
+
+/**
+ * sas_configure_routing - configure routing
+ * @dev: expander device
+ * @sas_addr: port identifier of device directly attached to the expander device
+ */
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 1);
+ return 0;
+}
+
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 0);
+ return 0;
+}
+
+/**
+ * sas_discover_expander - expander discovery
+ * @dev: pointer to expander domain device
+ *
+ * See comment in sas_discover_sata().
+ */
+static int sas_discover_expander(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_ex_general(dev);
+ if (res)
+ goto out_err;
+ res = sas_ex_manuf_info(dev);
+ if (res)
+ goto out_err;
+
+ res = sas_expander_discover(dev);
+ if (res) {
+ SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out_err;
+ }
+
+ sas_check_ex_subtractive_boundary(dev);
+ res = sas_check_parent_topology(dev);
+ if (res)
+ goto out_err;
+ return 0;
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
+{
+ int res = 0;
+ struct domain_device *dev;
+
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(dev->rphy);
+
+ if (level == ex->level)
+ res = sas_ex_discover_devices(dev, -1);
+ else if (level > 0)
+ res = sas_ex_discover_devices(port->port_dev, -1);
+
+ }
+ }
+
+ return res;
+}
+
+static int sas_ex_bfs_disc(struct asd_sas_port *port)
+{
+ int res;
+ int level;
+
+ do {
+ level = port->disc.max_level;
+ res = sas_ex_level_discovery(port, level);
+ mb();
+ } while (level < port->disc.max_level);
+
+ return res;
+}
+
+int sas_discover_root_expander(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+
+ res = sas_rphy_add(dev->rphy);
+ if (res)
+ goto out_err;
+
+ ex->level = dev->port->disc.max_level; /* 0 */
+ res = sas_discover_expander(dev);
+ if (res)
+ goto out_err2;
+
+ sas_ex_bfs_disc(dev->port);
+
+ return res;
+
+out_err2:
+ sas_rphy_remove(dev->rphy);
+out_err:
+ return res;
+}
+
+/* ---------- Domain revalidation ---------- */
+
+static int sas_get_phy_discover(struct domain_device *dev,
+ int phy_id, struct smp_resp *disc_resp)
+{
+ int res;
+ u8 *disc_req;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_req[1] = SMP_DISCOVER;
+ disc_req[9] = phy_id;
+
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ goto out;
+ else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+ res = disc_resp->result;
+ goto out;
+ }
+out:
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_get_phy_change_count(struct domain_device *dev,
+ int phy_id, int *pcc)
+{
+ int res;
+ struct smp_resp *disc_resp;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (!res)
+ *pcc = disc_resp->disc.change_count;
+
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, enum sas_device_type *type)
+{
+ int res;
+ struct smp_resp *disc_resp;
+ struct discover_resp *dr;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+ dr = &disc_resp->disc;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (res == 0) {
+ memcpy(sas_addr, disc_resp->disc.attached_sas_addr, 8);
+ *type = to_dev_type(dr);
+ if (*type == 0)
+ memset(sas_addr, 0, 8);
+ }
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
+ int from_phy, bool update)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ int i;
+
+ for (i = from_phy; i < ex->num_phys; i++) {
+ int phy_change_count = 0;
+
+ res = sas_get_phy_change_count(dev, i, &phy_change_count);
+ switch (res) {
+ case SMP_RESP_PHY_VACANT:
+ case SMP_RESP_NO_PHY:
+ continue;
+ case SMP_RESP_FUNC_ACC:
+ break;
+ default:
+ return res;
+ }
+
+ if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+ if (update)
+ ex->ex_phy[i].phy_change_count =
+ phy_change_count;
+ *phy_id = i;
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
+{
+ int res;
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+ if (res)
+ goto out;
+ if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ res = rg_resp->result;
+ goto out;
+ }
+
+ *ecc = be16_to_cpu(rg_resp->rg.change_count);
+out:
+ kfree(rg_resp);
+ kfree(rg_req);
+ return res;
+}
+/**
+ * sas_find_bcast_dev - find the device issue BROADCAST(CHANGE).
+ * @dev:domain device to be detect.
+ * @src_dev: the device which originated BROADCAST(CHANGE).
+ *
+ * Add self-configuration expander support. Suppose two expander cascading,
+ * when the first level expander is self-configuring, hotplug the disks in
+ * second level expander, BROADCAST(CHANGE) will not only be originated
+ * in the second level expander, but also be originated in the first level
+ * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
+ * expander changed count in two level expanders will all increment at least
+ * once, but the phy which chang count has changed is the source device which
+ * we concerned.
+ */
+
+static int sas_find_bcast_dev(struct domain_device *dev,
+ struct domain_device **src_dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int ex_change_count = -1;
+ int phy_id = -1;
+ int res;
+ struct domain_device *ch;
+
+ res = sas_get_ex_change_count(dev, &ex_change_count);
+ if (res)
+ goto out;
+ if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
+ /* Just detect if this expander phys phy change count changed,
+ * in order to determine if this expander originate BROADCAST,
+ * and do not update phy change count field in our structure.
+ */
+ res = sas_find_bcast_phy(dev, &phy_id, 0, false);
+ if (phy_id != -1) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ SAS_DPRINTK("Expander phy change count has changed\n");
+ return res;
+ } else
+ SAS_DPRINTK("Expander phys DID NOT change\n");
+ }
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (*src_dev)
+ return res;
+ }
+ }
+out:
+ return res;
+}
+
+static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child, *n;
+
+ list_for_each_entry_safe(child, n, &ex->children, siblings) {
+ set_bit(SAS_DEV_GONE, &child->state);
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ sas_unregister_ex_tree(port, child);
+ else
+ sas_unregister_dev(port, child);
+ }
+ sas_unregister_dev(port, dev);
+}
+
+static void sas_unregister_devs_sas_addr(struct domain_device *parent,
+ int phy_id, bool last)
+{
+ struct expander_device *ex_dev = &parent->ex_dev;
+ struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
+ struct domain_device *child, *n, *found = NULL;
+ if (last) {
+ list_for_each_entry_safe(child, n,
+ &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ set_bit(SAS_DEV_GONE, &child->state);
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ sas_unregister_ex_tree(parent->port, child);
+ else
+ sas_unregister_dev(parent->port, child);
+ found = child;
+ break;
+ }
+ }
+ sas_disable_routing(parent, phy->attached_sas_addr);
+ }
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ if (phy->port) {
+ sas_port_delete_phy(phy->port, phy->phy);
+ sas_device_set_phy(found, phy->port);
+ if (phy->port->num_phys == 0)
+ list_add_tail(&phy->port->del_list,
+ &parent->port->sas_port_del_list);
+ phy->port = NULL;
+ }
+}
+
+static int sas_discover_bfs_by_root_level(struct domain_device *root,
+ const int level)
+{
+ struct expander_device *ex_root = &root->ex_dev;
+ struct domain_device *child;
+ int res = 0;
+
+ list_for_each_entry(child, &ex_root->children, siblings) {
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(child->rphy);
+
+ if (level > ex->level)
+ res = sas_discover_bfs_by_root_level(child,
+ level);
+ else if (level == ex->level)
+ res = sas_ex_discover_devices(child, -1);
+ }
+ }
+ return res;
+}
+
+static int sas_discover_bfs_by_root(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+ int level = ex->level+1;
+
+ res = sas_ex_discover_devices(dev, -1);
+ if (res)
+ goto out;
+ do {
+ res = sas_discover_bfs_by_root_level(dev, level);
+ mb();
+ level += 1;
+ } while (level <= dev->port->disc.max_level);
+out:
+ return res;
+}
+
+static int sas_discover_new(struct domain_device *dev, int phy_id)
+{
+ struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
+ struct domain_device *child;
+ int res;
+
+ SAS_DPRINTK("ex %016llx phy%d new device attached\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ return res;
+
+ if (sas_ex_join_wide_port(dev, phy_id))
+ return 0;
+
+ res = sas_ex_discover_devices(dev, phy_id);
+ if (res)
+ return res;
+ list_for_each_entry(child, &dev->ex_dev.children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ res = sas_discover_bfs_by_root(child);
+ break;
+ }
+ }
+ return res;
+}
+
+static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
+{
+ if (old == new)
+ return true;
+
+ /* treat device directed resets as flutter, if we went
+ * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
+ */
+ if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
+ (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
+ return true;
+
+ return false;
+}
+
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ enum sas_device_type type = SAS_PHY_UNUSED;
+ u8 sas_addr[8];
+ int res;
+
+ memset(sas_addr, 0, 8);
+ res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
+ switch (res) {
+ case SMP_RESP_NO_PHY:
+ phy->phy_state = PHY_NOT_PRESENT;
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
+ return res;
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
+ return res;
+ case SMP_RESP_FUNC_ACC:
+ break;
+ case -ECOMM:
+ break;
+ default:
+ return res;
+ }
+
+ if ((SAS_ADDR(sas_addr) == 0) || (res == -ECOMM)) {
+ phy->phy_state = PHY_EMPTY;
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
+ return res;
+ } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
+ dev_type_flutter(type, phy->attached_dev_type)) {
+ struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id);
+ char *action = "";
+
+ sas_ex_phy_discover(dev, phy_id);
+
+ if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
+ action = ", needs recovery";
+ SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
+ SAS_ADDR(dev->sas_addr), phy_id, action);
+ return res;
+ }
+
+ /* delete the old link */
+ if (SAS_ADDR(phy->attached_sas_addr) &&
+ SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr)) {
+ SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
+ SAS_ADDR(dev->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr));
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
+ }
+
+ return sas_discover_new(dev, phy_id);
+}
+
+/**
+ * sas_rediscover - revalidate the domain.
+ * @dev:domain device to be detect.
+ * @phy_id: the phy id will be detected.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.For plugging out, we un-register the device only when it is
+ * the last phy in the port, for other phys in this port, we just delete it
+ * from the port.For inserting, we do discovery when it is the
+ * first phy,for other phys in this port, we add it to the port to
+ * forming the wide-port.
+ */
+static int sas_rediscover(struct domain_device *dev, const int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
+ int res = 0;
+ int i;
+ bool last = true; /* is this the last phy of the port */
+
+ SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+
+ if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(changed_phy->attached_sas_addr)) {
+ SAS_DPRINTK("phy%d part of wide port with "
+ "phy%d\n", phy_id, i);
+ last = false;
+ break;
+ }
+ }
+ res = sas_rediscover_dev(dev, phy_id, last);
+ } else
+ res = sas_discover_new(dev, phy_id);
+ return res;
+}
+
+/**
+ * sas_ex_revalidate_domain - revalidate the domain
+ * @port_dev: port domain device.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+int sas_ex_revalidate_domain(struct domain_device *port_dev)
+{
+ int res;
+ struct domain_device *dev = NULL;
+
+ res = sas_find_bcast_dev(port_dev, &dev);
+ if (res == 0 && dev) {
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, phy_id;
+
+ do {
+ phy_id = -1;
+ res = sas_find_bcast_phy(dev, &phy_id, i, true);
+ if (phy_id == -1)
+ break;
+ res = sas_rediscover(dev, phy_id);
+ i = phy_id + 1;
+ } while (i < ex->num_phys);
+ }
+ return res;
+}
+
+void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy)
+{
+ struct domain_device *dev;
+ unsigned int rcvlen = 0;
+ int ret = -EINVAL;
+
+ /* no rphy means no smp target support (ie aic94xx host) */
+ if (!rphy)
+ return sas_smp_host_handler(job, shost);
+
+ switch (rphy->identify.device_type) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ break;
+ default:
+ printk("%s: can we send a smp request to a device?\n",
+ __func__);
+ goto out;
+ }
+
+ dev = sas_find_dev_by_rphy(rphy);
+ if (!dev) {
+ printk("%s: fail to find a domain_device?\n", __func__);
+ goto out;
+ }
+
+ /* do we need to support multiple segments? */
+ if (job->request_payload.sg_cnt > 1 ||
+ job->reply_payload.sg_cnt > 1) {
+ printk("%s: multiple segments req %u, rsp %u\n",
+ __func__, job->request_payload.payload_len,
+ job->reply_payload.payload_len);
+ goto out;
+ }
+
+ ret = smp_execute_task_sg(dev, job->request_payload.sg_list,
+ job->reply_payload.sg_list);
+ if (ret >= 0) {
+ /* bsg_job_done() requires the length received */
+ rcvlen = job->reply_payload.payload_len - ret;
+ ret = 0;
+ }
+
+out:
+ bsg_job_done(job, ret, rcvlen);
+}
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
new file mode 100644
index 0000000..9ead93d
--- /dev/null
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -0,0 +1,357 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2007 James E.J. Bottomley
+ * <James.Bottomley@HansenPartnership.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 only.
+ */
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 phy_id)
+{
+ struct sas_phy *phy;
+ struct sas_rphy *rphy;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+
+ phy = sas_ha->sas_phy[phy_id]->phy;
+ resp_data[9] = phy_id;
+ resp_data[13] = phy->negotiated_linkrate;
+ memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
+ memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ resp_data[40] = (phy->minimum_linkrate << 4) |
+ phy->minimum_linkrate_hw;
+ resp_data[41] = (phy->maximum_linkrate << 4) |
+ phy->maximum_linkrate_hw;
+
+ if (!sas_ha->sas_phy[phy_id]->port ||
+ !sas_ha->sas_phy[phy_id]->port->port_dev)
+ return;
+
+ rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+ resp_data[12] = rphy->identify.device_type << 4;
+ resp_data[14] = rphy->identify.initiator_port_protocols;
+ resp_data[15] = rphy->identify.target_port_protocols;
+}
+
+/**
+ * to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od'
+ * @od: od bit to find
+ * @data: incoming bitstream (from frame)
+ * @index: requested data register index (from frame)
+ * @count: total number of registers in the bitstream (from frame)
+ * @bit: bit position of 'od' in the returned byte
+ *
+ * returns NULL if 'od' is not in 'data'
+ *
+ * From SFF-8485 v0.7:
+ * "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0)
+ * and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1).
+ *
+ * In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2)
+ * and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)."
+ *
+ * The general-purpose (raw-bitstream) RX registers have the same layout
+ * although 'od' is renamed 'id' for 'input data'.
+ *
+ * SFF-8489 defines the behavior of the LEDs in response to the 'od' values.
+ */
+static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit)
+{
+ unsigned int reg;
+ u8 byte;
+
+ /* gp registers start at index 1 */
+ if (index == 0)
+ return NULL;
+
+ index--; /* make index 0-based */
+ if (od < index * 32)
+ return NULL;
+
+ od -= index * 32;
+ reg = od >> 5;
+
+ if (reg >= count)
+ return NULL;
+
+ od &= (1 << 5) - 1;
+ byte = 3 - (od >> 3);
+ *bit = od & ((1 << 3) - 1);
+
+ return &data[reg * 4 + byte];
+}
+
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
+{
+ u8 *byte;
+ u8 bit;
+
+ byte = to_sas_gpio_gp_bit(od, data, index, count, &bit);
+ if (!byte)
+ return -1;
+
+ return (*byte >> bit) & 1;
+}
+EXPORT_SYMBOL(try_test_sas_gpio_gp_bit);
+
+static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 reg_type, u8 reg_index, u8 reg_count,
+ u8 *req_data)
+{
+ struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt);
+ int written;
+
+ if (i->dft->lldd_write_gpio == NULL) {
+ resp_data[2] = SMP_RESP_FUNC_UNK;
+ return 0;
+ }
+
+ written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index,
+ reg_count, req_data);
+
+ if (written < 0) {
+ resp_data[2] = SMP_RESP_FUNC_FAILED;
+ written = 0;
+ } else
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+
+ return written;
+}
+
+static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 phy_id)
+{
+ struct sas_rphy *rphy;
+ struct dev_to_host_fis *fis;
+ int i;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+
+ resp_data[2] = SMP_RESP_PHY_NO_SATA;
+
+ if (!sas_ha->sas_phy[phy_id]->port)
+ return;
+
+ rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+ fis = (struct dev_to_host_fis *)
+ sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
+ if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
+ return;
+
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ resp_data[9] = phy_id;
+ memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+ SAS_ADDR_SIZE);
+
+ /* check to see if we have a valid d2h fis */
+ if (fis->fis_type != 0x34)
+ return;
+
+ /* the d2h fis is required by the standard to be in LE format */
+ for (i = 0; i < 20; i += 4) {
+ u8 *dst = resp_data + 24 + i, *src =
+ &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
+ dst[0] = src[3];
+ dst[1] = src[2];
+ dst[2] = src[1];
+ dst[3] = src[0];
+ }
+}
+
+static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
+ u8 phy_op, enum sas_linkrate min,
+ enum sas_linkrate max, u8 *resp_data)
+{
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+ struct sas_phy_linkrates rates;
+ struct asd_sas_phy *asd_phy;
+
+ if (phy_id >= sas_ha->num_phys) {
+ resp_data[2] = SMP_RESP_NO_PHY;
+ return;
+ }
+
+ asd_phy = sas_ha->sas_phy[phy_id];
+ switch (phy_op) {
+ case PHY_FUNC_NOP:
+ case PHY_FUNC_LINK_RESET:
+ case PHY_FUNC_HARD_RESET:
+ case PHY_FUNC_DISABLE:
+ case PHY_FUNC_CLEAR_ERROR_LOG:
+ case PHY_FUNC_CLEAR_AFFIL:
+ case PHY_FUNC_TX_SATA_PS_SIGNAL:
+ break;
+
+ default:
+ resp_data[2] = SMP_RESP_PHY_UNK_OP;
+ return;
+ }
+
+ rates.minimum_linkrate = min;
+ rates.maximum_linkrate = max;
+
+ /* filter reset requests through libata eh */
+ if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) {
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ return;
+ }
+
+ if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates))
+ resp_data[2] = SMP_RESP_FUNC_FAILED;
+ else
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+}
+
+void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ u8 *req_data, *resp_data;
+ unsigned int reslen = 0;
+ int error = -EINVAL;
+
+ /* eight is the minimum size for request and response frames */
+ if (job->request_payload.payload_len < 8 ||
+ job->reply_payload.payload_len < 8)
+ goto out;
+
+ error = -ENOMEM;
+ req_data = kzalloc(job->request_payload.payload_len, GFP_KERNEL);
+ if (!req_data)
+ goto out;
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt, req_data,
+ job->request_payload.payload_len);
+
+ /* make sure frame can always be built ... we copy
+ * back only the requested length */
+ resp_data = kzalloc(max(job->reply_payload.payload_len, 128U),
+ GFP_KERNEL);
+ if (!resp_data)
+ goto out_free_req;
+
+ error = -EINVAL;
+ if (req_data[0] != SMP_REQUEST)
+ goto out_free_resp;
+
+ /* set up default don't know response */
+ resp_data[0] = SMP_RESPONSE;
+ resp_data[1] = req_data[1];
+ resp_data[2] = SMP_RESP_FUNC_UNK;
+
+ switch (req_data[1]) {
+ case SMP_REPORT_GENERAL:
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ resp_data[9] = sas_ha->num_phys;
+ reslen = 32;
+ break;
+
+ case SMP_REPORT_MANUF_INFO:
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+ memcpy(resp_data + 12, shost->hostt->name,
+ SAS_EXPANDER_VENDOR_ID_LEN);
+ memcpy(resp_data + 20, "libsas virt phy",
+ SAS_EXPANDER_PRODUCT_ID_LEN);
+ reslen = 64;
+ break;
+
+ case SMP_READ_GPIO_REG:
+ /* FIXME: need GPIO support in the transport class */
+ break;
+
+ case SMP_DISCOVER:
+ if (job->request_payload.payload_len < 16)
+ goto out_free_resp;
+ sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
+ reslen = 56;
+ break;
+
+ case SMP_REPORT_PHY_ERR_LOG:
+ /* FIXME: could implement this with additional
+ * libsas callbacks providing the HW supports it */
+ break;
+
+ case SMP_REPORT_PHY_SATA:
+ if (job->request_payload.payload_len < 16)
+ goto out_free_resp;
+ sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
+ reslen = 60;
+ break;
+
+ case SMP_REPORT_ROUTE_INFO:
+ /* Can't implement; hosts have no routes */
+ break;
+
+ case SMP_WRITE_GPIO_REG: {
+ /* SFF-8485 v0.7 */
+ const int base_frame_size = 11;
+ int to_write = req_data[4];
+
+ if (job->request_payload.payload_len <
+ base_frame_size + to_write * 4) {
+ resp_data[2] = SMP_RESP_INV_FRM_LEN;
+ break;
+ }
+
+ to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2],
+ req_data[3], to_write, &req_data[8]);
+ reslen = 8;
+ break;
+ }
+
+ case SMP_CONF_ROUTE_INFO:
+ /* Can't implement; hosts have no routes */
+ break;
+
+ case SMP_PHY_CONTROL:
+ if (job->request_payload.payload_len < 44)
+ goto out_free_resp;
+ sas_phy_control(sas_ha, req_data[9], req_data[10],
+ req_data[32] >> 4, req_data[33] >> 4,
+ resp_data);
+ reslen = 8;
+ break;
+
+ case SMP_PHY_TEST_FUNCTION:
+ /* FIXME: should this be implemented? */
+ break;
+
+ default:
+ /* probably a 2.0 function */
+ break;
+ }
+
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, resp_data,
+ job->reply_payload.payload_len);
+
+ error = 0;
+out_free_resp:
+ kfree(resp_data);
+out_free_req:
+ kfree(req_data);
+out:
+ bsg_job_done(job, error, reslen);
+}
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
new file mode 100644
index 0000000..ede0af7
--- /dev/null
+++ b/drivers/scsi/libsas/sas_init.c
@@ -0,0 +1,683 @@
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/sas_ata.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+static struct kmem_cache *sas_task_cache;
+static struct kmem_cache *sas_event_cache;
+
+struct sas_task *sas_alloc_task(gfp_t flags)
+{
+ struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags);
+
+ if (task) {
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ }
+
+ return task;
+}
+EXPORT_SYMBOL_GPL(sas_alloc_task);
+
+struct sas_task *sas_alloc_slow_task(gfp_t flags)
+{
+ struct sas_task *task = sas_alloc_task(flags);
+ struct sas_task_slow *slow = kmalloc(sizeof(*slow), flags);
+
+ if (!task || !slow) {
+ if (task)
+ kmem_cache_free(sas_task_cache, task);
+ kfree(slow);
+ return NULL;
+ }
+
+ task->slow_task = slow;
+ slow->task = task;
+ timer_setup(&slow->timer, NULL, 0);
+ init_completion(&slow->completion);
+
+ return task;
+}
+EXPORT_SYMBOL_GPL(sas_alloc_slow_task);
+
+void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ kfree(task->slow_task);
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+EXPORT_SYMBOL_GPL(sas_free_task);
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+ const u32 poly = 0x00DB2777;
+ u32 r = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ int b;
+ for (b = 7; b >= 0; b--) {
+ r <<= 1;
+ if ((1 << b) & sas_addr[i]) {
+ if (!(r & 0x01000000))
+ r ^= poly;
+ } else if (r & 0x01000000)
+ r ^= poly;
+ }
+ }
+
+ hashed[0] = (r >> 16) & 0xFF;
+ hashed[1] = (r >> 8) & 0xFF ;
+ hashed[2] = r & 0xFF;
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+ char name[64];
+ int error = 0;
+
+ mutex_init(&sas_ha->disco_mutex);
+ spin_lock_init(&sas_ha->phy_port_lock);
+ sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+ set_bit(SAS_HA_REGISTERED, &sas_ha->state);
+ spin_lock_init(&sas_ha->lock);
+ mutex_init(&sas_ha->drain_mutex);
+ init_waitqueue_head(&sas_ha->eh_wait_q);
+ INIT_LIST_HEAD(&sas_ha->defer_q);
+ INIT_LIST_HEAD(&sas_ha->eh_dev_q);
+
+ sas_ha->event_thres = SAS_PHY_SHUTDOWN_THRES;
+
+ error = sas_register_phys(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+ return error;
+ }
+
+ error = sas_register_ports(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+ goto Undo_phys;
+ }
+
+ error = sas_init_events(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+ goto Undo_ports;
+ }
+
+ error = -ENOMEM;
+ snprintf(name, sizeof(name), "%s_event_q", dev_name(sas_ha->dev));
+ sas_ha->event_q = create_singlethread_workqueue(name);
+ if (!sas_ha->event_q)
+ goto Undo_ports;
+
+ snprintf(name, sizeof(name), "%s_disco_q", dev_name(sas_ha->dev));
+ sas_ha->disco_q = create_singlethread_workqueue(name);
+ if (!sas_ha->disco_q)
+ goto Undo_event_q;
+
+ INIT_LIST_HEAD(&sas_ha->eh_done_q);
+ INIT_LIST_HEAD(&sas_ha->eh_ata_q);
+
+ return 0;
+
+Undo_event_q:
+ destroy_workqueue(sas_ha->event_q);
+Undo_ports:
+ sas_unregister_ports(sas_ha);
+Undo_phys:
+
+ return error;
+}
+
+static void sas_disable_events(struct sas_ha_struct *sas_ha)
+{
+ /* Set the state to unregistered to avoid further unchained
+ * events to be queued, and flush any in-progress drainers
+ */
+ mutex_lock(&sas_ha->drain_mutex);
+ spin_lock_irq(&sas_ha->lock);
+ clear_bit(SAS_HA_REGISTERED, &sas_ha->state);
+ spin_unlock_irq(&sas_ha->lock);
+ __sas_drain_work(sas_ha);
+ mutex_unlock(&sas_ha->drain_mutex);
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+ sas_disable_events(sas_ha);
+ sas_unregister_ports(sas_ha);
+
+ /* flush unregistration work */
+ mutex_lock(&sas_ha->drain_mutex);
+ __sas_drain_work(sas_ha);
+ mutex_unlock(&sas_ha->drain_mutex);
+
+ destroy_workqueue(sas_ha->disco_q);
+ destroy_workqueue(sas_ha->event_q);
+
+ return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ return i->dft->lldd_control_phy(asd_phy, PHY_FUNC_GET_EVENTS, NULL);
+ }
+
+ return sas_smp_get_phy_events(phy);
+}
+
+int sas_try_ata_reset(struct asd_sas_phy *asd_phy)
+{
+ struct domain_device *dev = NULL;
+
+ /* try to route user requested link resets through libata */
+ if (asd_phy->port)
+ dev = asd_phy->port->port_dev;
+
+ /* validate that dev has been probed */
+ if (dev)
+ dev = sas_find_dev_by_rphy(dev->rphy);
+
+ if (dev && dev_is_sata(dev)) {
+ sas_ata_schedule_reset(dev);
+ sas_ata_wait_eh(dev);
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+/*
+ * transport_sas_phy_reset - reset a phy and permit libata to manage the link
+ *
+ * phy reset request via sysfs in host workqueue context so we know we
+ * can block on eh and safely traverse the domain_device topology
+ */
+static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ enum phy_func reset_type;
+
+ if (hard_reset)
+ reset_type = PHY_FUNC_HARD_RESET;
+ else
+ reset_type = PHY_FUNC_LINK_RESET;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (!hard_reset && sas_try_ata_reset(asd_phy) == 0)
+ return 0;
+ return i->dft->lldd_control_phy(asd_phy, reset_type, NULL);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ struct domain_device *ata_dev = sas_ex_to_ata(ddev, phy->number);
+
+ if (ata_dev && !hard_reset) {
+ sas_ata_schedule_reset(ata_dev);
+ sas_ata_wait_eh(ata_dev);
+ return 0;
+ } else
+ return sas_smp_phy_control(ddev, phy->number, reset_type, NULL);
+ }
+}
+
+static int sas_phy_enable(struct sas_phy *phy, int enable)
+{
+ int ret;
+ enum phy_func cmd;
+
+ if (enable)
+ cmd = PHY_FUNC_LINK_RESET;
+ else
+ cmd = PHY_FUNC_DISABLE;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (enable)
+ ret = transport_sas_phy_reset(phy, 0);
+ else
+ ret = i->dft->lldd_control_phy(asd_phy, cmd, NULL);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+
+ if (enable)
+ ret = transport_sas_phy_reset(phy, 0);
+ else
+ ret = sas_smp_phy_control(ddev, phy->number, cmd, NULL);
+ }
+ return ret;
+}
+
+int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ int ret;
+ enum phy_func reset_type;
+
+ if (!phy->enabled)
+ return -ENODEV;
+
+ if (hard_reset)
+ reset_type = PHY_FUNC_HARD_RESET;
+ else
+ reset_type = PHY_FUNC_LINK_RESET;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL);
+ }
+ return ret;
+}
+
+int sas_set_phy_speed(struct sas_phy *phy,
+ struct sas_phy_linkrates *rates)
+{
+ int ret;
+
+ if ((rates->minimum_linkrate &&
+ rates->minimum_linkrate > phy->maximum_linkrate) ||
+ (rates->maximum_linkrate &&
+ rates->maximum_linkrate < phy->minimum_linkrate))
+ return -EINVAL;
+
+ if (rates->minimum_linkrate &&
+ rates->minimum_linkrate < phy->minimum_linkrate_hw)
+ rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+ if (rates->maximum_linkrate &&
+ rates->maximum_linkrate > phy->maximum_linkrate_hw)
+ rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, PHY_FUNC_SET_LINK_RATE,
+ rates);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number,
+ PHY_FUNC_LINK_RESET, rates);
+
+ }
+
+ return ret;
+}
+
+void sas_prep_resume_ha(struct sas_ha_struct *ha)
+{
+ int i;
+
+ set_bit(SAS_HA_REGISTERED, &ha->state);
+
+ /* clear out any stale link events/data from the suspension path */
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_phy *phy = ha->sas_phy[i];
+
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ phy->frame_rcvd_size = 0;
+ }
+}
+EXPORT_SYMBOL(sas_prep_resume_ha);
+
+static int phys_suspended(struct sas_ha_struct *ha)
+{
+ int i, rc = 0;
+
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_phy *phy = ha->sas_phy[i];
+
+ if (phy->suspended)
+ rc++;
+ }
+
+ return rc;
+}
+
+void sas_resume_ha(struct sas_ha_struct *ha)
+{
+ const unsigned long tmo = msecs_to_jiffies(25000);
+ int i;
+
+ /* deform ports on phys that did not resume
+ * at this point we may be racing the phy coming back (as posted
+ * by the lldd). So we post the event and once we are in the
+ * libsas context check that the phy remains suspended before
+ * tearing it down.
+ */
+ i = phys_suspended(ha);
+ if (i)
+ dev_info(ha->dev, "waiting up to 25 seconds for %d phy%s to resume\n",
+ i, i > 1 ? "s" : "");
+ wait_event_timeout(ha->eh_wait_q, phys_suspended(ha) == 0, tmo);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_phy *phy = ha->sas_phy[i];
+
+ if (phy->suspended) {
+ dev_warn(&phy->phy->dev, "resume timeout\n");
+ sas_notify_phy_event(phy, PHYE_RESUME_TIMEOUT);
+ }
+ }
+
+ /* all phys are back up or timed out, turn on i/o so we can
+ * flush out disks that did not return
+ */
+ scsi_unblock_requests(ha->core.shost);
+ sas_drain_work(ha);
+}
+EXPORT_SYMBOL(sas_resume_ha);
+
+void sas_suspend_ha(struct sas_ha_struct *ha)
+{
+ int i;
+
+ sas_disable_events(ha);
+ scsi_block_requests(ha->core.shost);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_port *port = ha->sas_port[i];
+
+ sas_discover_event(port, DISCE_SUSPEND);
+ }
+
+ /* flush suspend events while unregistered */
+ mutex_lock(&ha->drain_mutex);
+ __sas_drain_work(ha);
+ mutex_unlock(&ha->drain_mutex);
+}
+EXPORT_SYMBOL(sas_suspend_ha);
+
+static void sas_phy_release(struct sas_phy *phy)
+{
+ kfree(phy->hostdata);
+ phy->hostdata = NULL;
+}
+
+static void phy_reset_work(struct work_struct *work)
+{
+ struct sas_phy_data *d = container_of(work, typeof(*d), reset_work.work);
+
+ d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset);
+}
+
+static void phy_enable_work(struct work_struct *work)
+{
+ struct sas_phy_data *d = container_of(work, typeof(*d), enable_work.work);
+
+ d->enable_result = sas_phy_enable(d->phy, d->enable);
+}
+
+static int sas_phy_setup(struct sas_phy *phy)
+{
+ struct sas_phy_data *d = kzalloc(sizeof(*d), GFP_KERNEL);
+
+ if (!d)
+ return -ENOMEM;
+
+ mutex_init(&d->event_lock);
+ INIT_SAS_WORK(&d->reset_work, phy_reset_work);
+ INIT_SAS_WORK(&d->enable_work, phy_enable_work);
+ d->phy = phy;
+ phy->hostdata = d;
+
+ return 0;
+}
+
+static int queue_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct sas_phy_data *d = phy->hostdata;
+ int rc;
+
+ if (!d)
+ return -ENOMEM;
+
+ /* libsas workqueue coordinates ata-eh reset with discovery */
+ mutex_lock(&d->event_lock);
+ d->reset_result = 0;
+ d->hard_reset = hard_reset;
+
+ spin_lock_irq(&ha->lock);
+ sas_queue_work(ha, &d->reset_work);
+ spin_unlock_irq(&ha->lock);
+
+ rc = sas_drain_work(ha);
+ if (rc == 0)
+ rc = d->reset_result;
+ mutex_unlock(&d->event_lock);
+
+ return rc;
+}
+
+static int queue_phy_enable(struct sas_phy *phy, int enable)
+{
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct sas_phy_data *d = phy->hostdata;
+ int rc;
+
+ if (!d)
+ return -ENOMEM;
+
+ /* libsas workqueue coordinates ata-eh reset with discovery */
+ mutex_lock(&d->event_lock);
+ d->enable_result = 0;
+ d->enable = enable;
+
+ spin_lock_irq(&ha->lock);
+ sas_queue_work(ha, &d->enable_work);
+ spin_unlock_irq(&ha->lock);
+
+ rc = sas_drain_work(ha);
+ if (rc == 0)
+ rc = d->enable_result;
+ mutex_unlock(&d->event_lock);
+
+ return rc;
+}
+
+static struct sas_function_template sft = {
+ .phy_enable = queue_phy_enable,
+ .phy_reset = queue_phy_reset,
+ .phy_setup = sas_phy_setup,
+ .phy_release = sas_phy_release,
+ .set_phy_speed = sas_set_phy_speed,
+ .get_linkerrors = sas_get_linkerrors,
+ .smp_handler = sas_smp_handler,
+};
+
+static inline ssize_t phy_event_threshold_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", sha->event_thres);
+}
+
+static inline ssize_t phy_event_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ sha->event_thres = simple_strtol(buf, NULL, 10);
+
+ /* threshold cannot be set too small */
+ if (sha->event_thres < 32)
+ sha->event_thres = 32;
+
+ return count;
+}
+
+DEVICE_ATTR(phy_event_threshold,
+ S_IRUGO|S_IWUSR,
+ phy_event_threshold_show,
+ phy_event_threshold_store);
+EXPORT_SYMBOL_GPL(dev_attr_phy_event_threshold);
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+ struct scsi_transport_template *stt = sas_attach_transport(&sft);
+ struct sas_internal *i;
+
+ if (!stt)
+ return stt;
+
+ i = to_sas_internal(stt);
+ i->dft = dft;
+ stt->create_work_queue = 1;
+ stt->eh_strategy_handler = sas_scsi_recover_host;
+
+ return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy)
+{
+ struct asd_sas_event *event;
+ gfp_t flags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ event = kmem_cache_zalloc(sas_event_cache, flags);
+ if (!event)
+ return NULL;
+
+ atomic_inc(&phy->event_nr);
+
+ if (atomic_read(&phy->event_nr) > phy->ha->event_thres) {
+ if (i->dft->lldd_control_phy) {
+ if (cmpxchg(&phy->in_shutdown, 0, 1) == 0) {
+ sas_printk("The phy%02d bursting events, shut it down.\n",
+ phy->id);
+ sas_notify_phy_event(phy, PHYE_SHUTDOWN);
+ }
+ } else {
+ /* Do not support PHY control, stop allocating events */
+ WARN_ONCE(1, "PHY control not supported.\n");
+ kmem_cache_free(sas_event_cache, event);
+ atomic_dec(&phy->event_nr);
+ event = NULL;
+ }
+ }
+
+ return event;
+}
+
+void sas_free_event(struct asd_sas_event *event)
+{
+ struct asd_sas_phy *phy = event->phy;
+
+ kmem_cache_free(sas_event_cache, event);
+ atomic_dec(&phy->event_nr);
+}
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+ sas_task_cache = KMEM_CACHE(sas_task, SLAB_HWCACHE_ALIGN);
+ if (!sas_task_cache)
+ goto out;
+
+ sas_event_cache = KMEM_CACHE(asd_sas_event, SLAB_HWCACHE_ALIGN);
+ if (!sas_event_cache)
+ goto free_task_kmem;
+
+ return 0;
+free_task_kmem:
+ kmem_cache_destroy(sas_task_cache);
+out:
+ return -ENOMEM;
+}
+
+static void __exit sas_class_exit(void)
+{
+ kmem_cache_destroy(sas_task_cache);
+ kmem_cache_destroy(sas_event_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
new file mode 100644
index 0000000..50e12d6
--- /dev/null
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -0,0 +1,205 @@
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/libsas.h>
+#include <scsi/sas_ata.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
+
+#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
+struct sas_phy_data {
+ /* let reset be performed in sas_queue_work() context */
+ struct sas_phy *phy;
+ struct mutex event_lock;
+ int hard_reset;
+ int reset_result;
+ struct sas_work reset_work;
+ int enable;
+ int enable_result;
+ struct sas_work enable_work;
+};
+
+void sas_scsi_recover_host(struct Scsi_Host *shost);
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_protocol proto, char *buf);
+int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy);
+void sas_free_event(struct asd_sas_event *event);
+
+int sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+int sas_init_events(struct sas_ha_struct *sas_ha);
+void sas_disable_revalidation(struct sas_ha_struct *ha);
+void sas_enable_revalidation(struct sas_ha_struct *ha);
+void __sas_drain_work(struct sas_ha_struct *ha);
+
+void sas_deform_port(struct asd_sas_phy *phy, int gone);
+
+void sas_porte_bytes_dmaed(struct work_struct *work);
+void sas_porte_broadcast_rcvd(struct work_struct *work);
+void sas_porte_link_reset_err(struct work_struct *work);
+void sas_porte_timer_event(struct work_struct *work);
+void sas_porte_hard_reset(struct work_struct *work);
+int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw);
+
+int sas_notify_lldd_dev_found(struct domain_device *);
+void sas_notify_lldd_dev_gone(struct domain_device *);
+
+void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy);
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func, struct sas_phy_linkrates *);
+int sas_smp_get_phy_events(struct sas_phy *phy);
+
+int sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event);
+void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
+struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
+int sas_ex_phy_discover(struct domain_device *dev, int single);
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+ struct smp_resp *rps_resp);
+int sas_try_ata_reset(struct asd_sas_phy *phy);
+void sas_hae_reset(struct work_struct *work);
+
+void sas_free_device(struct kref *kref);
+void sas_destruct_devices(struct asd_sas_port *port);
+
+extern const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS];
+extern const work_func_t sas_port_event_fns[PORT_NUM_EVENTS];
+
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+extern void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost);
+#else
+static inline void sas_smp_host_handler(struct bsg_job *job,
+ struct Scsi_Host *shost)
+{
+ shost_printk(KERN_ERR, shost,
+ "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
+ bsg_job_done(job, -EINVAL, 0);
+}
+#endif
+
+static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err)
+{
+ SAS_DPRINTK("%s: for %s device %16llx returned %d\n",
+ func, dev->parent ? "exp-attached" :
+ "direct-attached",
+ SAS_ADDR(dev->sas_addr), err);
+ sas_unregister_dev(dev->port, dev);
+}
+
+static inline void sas_fill_in_rphy(struct domain_device *dev,
+ struct sas_rphy *rphy)
+{
+ rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
+ rphy->identify.initiator_port_protocols = dev->iproto;
+ rphy->identify.target_port_protocols = dev->tproto;
+ switch (dev->dev_type) {
+ case SAS_SATA_DEV:
+ /* FIXME: need sata device type */
+ case SAS_END_DEVICE:
+ case SAS_SATA_PENDING:
+ rphy->identify.device_type = SAS_END_DEVICE;
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
+ break;
+ default:
+ rphy->identify.device_type = SAS_PHY_UNUSED;
+ break;
+ }
+}
+
+static inline void sas_phy_set_target(struct asd_sas_phy *p, struct domain_device *dev)
+{
+ struct sas_phy *phy = p->phy;
+
+ if (dev) {
+ if (dev_is_sata(dev))
+ phy->identify.device_type = SAS_END_DEVICE;
+ else
+ phy->identify.device_type = dev->dev_type;
+ phy->identify.target_port_protocols = dev->tproto;
+ } else {
+ phy->identify.device_type = SAS_PHY_UNUSED;
+ phy->identify.target_port_protocols = 0;
+ }
+}
+
+static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+
+ if (!ex->parent_port) {
+ ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
+ /* FIXME: error handling */
+ BUG_ON(!ex->parent_port);
+ BUG_ON(sas_port_add(ex->parent_port));
+ sas_port_mark_backlink(ex->parent_port);
+ }
+ sas_port_add_phy(ex->parent_port, ex_phy->phy);
+}
+
+static inline struct domain_device *sas_alloc_device(void)
+{
+ struct domain_device *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+
+ if (dev) {
+ INIT_LIST_HEAD(&dev->siblings);
+ INIT_LIST_HEAD(&dev->dev_list_node);
+ INIT_LIST_HEAD(&dev->disco_list_node);
+ kref_init(&dev->kref);
+ spin_lock_init(&dev->done_lock);
+ }
+ return dev;
+}
+
+static inline void sas_put_device(struct domain_device *dev)
+{
+ kref_put(&dev->kref, sas_free_device);
+}
+
+#endif /* _SAS_INTERNAL_H_ */
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
new file mode 100644
index 0000000..bf3e1b9
--- /dev/null
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -0,0 +1,180 @@
+/*
+ * Serial Attached SCSI (SAS) Phy class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Phy events ---------- */
+
+static void sas_phye_loss_of_signal(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ phy->in_shutdown = 0;
+ phy->error = 0;
+ sas_deform_port(phy, 1);
+}
+
+static void sas_phye_oob_done(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ phy->in_shutdown = 0;
+ phy->error = 0;
+}
+
+static void sas_phye_oob_error(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ sas_deform_port(phy, 1);
+
+ if (!port && phy->enabled && i->dft->lldd_control_phy) {
+ phy->error++;
+ switch (phy->error) {
+ case 1:
+ case 2:
+ i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET,
+ NULL);
+ break;
+ case 3:
+ default:
+ phy->error = 0;
+ phy->enabled = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
+ break;
+ }
+ }
+}
+
+static void sas_phye_spinup_hold(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ phy->error = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
+}
+
+static void sas_phye_resume_timeout(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ /* phew, lldd got the phy back in the nick of time */
+ if (!phy->suspended) {
+ dev_info(&phy->phy->dev, "resume timeout cancelled\n");
+ return;
+ }
+
+ phy->error = 0;
+ phy->suspended = 0;
+ sas_deform_port(phy, 1);
+}
+
+
+static void sas_phye_shutdown(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (phy->enabled) {
+ int ret;
+
+ phy->error = 0;
+ phy->enabled = 0;
+ ret = i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
+ if (ret)
+ sas_printk("lldd disable phy%02d returned %d\n",
+ phy->id, ret);
+ } else
+ sas_printk("phy%02d is not enabled, cannot shutdown\n",
+ phy->id);
+}
+
+/* ---------- Phy class registration ---------- */
+
+int sas_register_phys(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ /* Now register the phys. */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_phy *phy = sas_ha->sas_phy[i];
+
+ phy->error = 0;
+ atomic_set(&phy->event_nr, 0);
+ INIT_LIST_HEAD(&phy->port_phy_el);
+
+ phy->port = NULL;
+ phy->ha = sas_ha;
+ spin_lock_init(&phy->frame_rcvd_lock);
+ spin_lock_init(&phy->sas_prim_lock);
+ phy->frame_rcvd_size = 0;
+
+ phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, i);
+ if (!phy->phy)
+ return -ENOMEM;
+
+ phy->phy->identify.initiator_port_protocols =
+ phy->iproto;
+ phy->phy->identify.target_port_protocols = phy->tproto;
+ phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
+ phy->phy->identify.phy_identifier = i;
+ phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ sas_phy_add(phy->phy);
+ }
+
+ return 0;
+}
+
+const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS] = {
+ [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+ [PHYE_OOB_DONE] = sas_phye_oob_done,
+ [PHYE_OOB_ERROR] = sas_phye_oob_error,
+ [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+ [PHYE_RESUME_TIMEOUT] = sas_phye_resume_timeout,
+ [PHYE_SHUTDOWN] = sas_phye_shutdown,
+};
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
new file mode 100644
index 0000000..fad23dd
--- /dev/null
+++ b/drivers/scsi/libsas/sas_port.c
@@ -0,0 +1,361 @@
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy *phy)
+{
+ struct sas_ha_struct *sas_ha = phy->ha;
+
+ if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE) != 0 || (sas_ha->strict_wide_ports &&
+ memcmp(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE) != 0))
+ return false;
+ return true;
+}
+
+static void sas_resume_port(struct asd_sas_phy *phy)
+{
+ struct domain_device *dev;
+ struct asd_sas_port *port = phy->port;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_formed(phy);
+
+ if (port->suspended)
+ port->suspended = 0;
+ else {
+ /* we only need to handle "link returned" actions once */
+ return;
+ }
+
+ /* if the port came back:
+ * 1/ presume every device came back
+ * 2/ force the next revalidation to check all expander phys
+ */
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ int i, rc;
+
+ rc = sas_notify_lldd_dev_found(dev);
+ if (rc) {
+ sas_unregister_dev(port, dev);
+ sas_destruct_devices(port);
+ continue;
+ }
+
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ dev->ex_dev.ex_change_count = -1;
+ for (i = 0; i < dev->ex_dev.num_phys; i++) {
+ struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
+
+ phy->phy_change_count = -1;
+ }
+ }
+ }
+
+ sas_discover_event(port, DISCE_RESUME);
+}
+
+/**
+ * sas_form_port - add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+ unsigned long flags;
+
+ if (port) {
+ if (!phy_is_wideport_member(port, phy))
+ sas_deform_port(phy, 0);
+ else if (phy->suspended) {
+ phy->suspended = 0;
+ sas_resume_port(phy);
+
+ /* phy came back, try to cancel the timeout */
+ wake_up(&sas_ha->eh_wait_q);
+ return;
+ } else {
+ SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+ __func__, phy->id, phy->port->id,
+ phy->port->num_phys);
+ return;
+ }
+ }
+
+ /* see if the phy should be part of a wide port */
+ spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *) port->sas_addr &&
+ phy_is_wideport_member(port, phy) && port->num_phys > 0) {
+ /* wide port */
+ SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+ port->id);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+ /* The phy does not match any existing port, create a new one */
+ if (i == sas_ha->num_phys) {
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *)port->sas_addr == 0
+ && port->num_phys == 0) {
+ memcpy(port->sas_addr, phy->sas_addr,
+ SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+ }
+
+ if (i >= sas_ha->num_phys) {
+ printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+ __func__);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
+ return;
+ }
+
+ /* add the phy to the port */
+ list_add_tail(&phy->port_phy_el, &port->phy_list);
+ sas_phy_set_target(phy, port->port_dev);
+ phy->port = port;
+ port->num_phys++;
+ port->phy_mask |= (1U << phy->id);
+
+ if (*(u64 *)port->attached_sas_addr == 0) {
+ port->class = phy->class;
+ memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ port->iproto = phy->iproto;
+ port->tproto = phy->tproto;
+ port->oob_mode = phy->oob_mode;
+ port->linkrate = phy->linkrate;
+ } else
+ port->linkrate = max(port->linkrate, phy->linkrate);
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
+
+ if (!port->port) {
+ port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+ BUG_ON(!port->port);
+ sas_port_add(port->port);
+ }
+ sas_port_add_phy(port->port, phy->phy);
+
+ SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
+ dev_name(&phy->phy->dev), dev_name(&port->port->dev),
+ port->phy_mask,
+ SAS_ADDR(port->attached_sas_addr));
+
+ if (port->port_dev)
+ port->port_dev->pathways = port->num_phys;
+
+ /* Tell the LLDD about this port formation. */
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_formed(phy);
+
+ sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+ flush_workqueue(sas_ha->disco_q);
+}
+
+/**
+ * sas_deform_port - remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ * @gone: whether or not the PHY is gone
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy, int gone)
+{
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+ struct domain_device *dev;
+ unsigned long flags;
+
+ if (!port)
+ return; /* done by a phy event */
+
+ dev = port->port_dev;
+ if (dev)
+ dev->pathways--;
+
+ if (port->num_phys == 1) {
+ sas_unregister_domain_devices(port, gone);
+ sas_destruct_devices(port);
+ sas_port_delete(port->port);
+ port->port = NULL;
+ } else {
+ sas_port_delete_phy(port->port, phy->phy);
+ sas_device_set_phy(dev, port->port);
+ }
+
+ if (si->dft->lldd_port_deformed)
+ si->dft->lldd_port_deformed(phy);
+
+ spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
+ spin_lock(&port->phy_list_lock);
+
+ list_del_init(&phy->port_phy_el);
+ sas_phy_set_target(phy, NULL);
+ phy->port = NULL;
+ port->num_phys--;
+ port->phy_mask &= ~(1U << phy->id);
+
+ if (port->num_phys == 0) {
+ INIT_LIST_HEAD(&port->phy_list);
+ memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ port->class = 0;
+ port->iproto = 0;
+ port->tproto = 0;
+ port->oob_mode = 0;
+ port->phy_mask = 0;
+ }
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
+
+ return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+ unsigned long flags;
+ u32 prim;
+
+ spin_lock_irqsave(&phy->sas_prim_lock, flags);
+ prim = phy->sas_prim;
+ spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+ SAS_DPRINTK("broadcast received: %d\n", prim);
+ sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+
+ if (phy->port)
+ flush_workqueue(phy->port->ha->disco_q);
+}
+
+void sas_porte_link_reset_err(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ sas_deform_port(phy, 1);
+}
+
+void sas_porte_timer_event(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ sas_deform_port(phy, 1);
+}
+
+void sas_porte_hard_reset(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+ struct asd_sas_phy *phy = ev->phy;
+
+ sas_deform_port(phy, 1);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+ struct sas_ha_struct *sas_ha, int i)
+{
+ memset(port, 0, sizeof(*port));
+ port->id = i;
+ INIT_LIST_HEAD(&port->dev_list);
+ INIT_LIST_HEAD(&port->disco_list);
+ INIT_LIST_HEAD(&port->destroy_list);
+ INIT_LIST_HEAD(&port->sas_port_del_list);
+ spin_lock_init(&port->phy_list_lock);
+ INIT_LIST_HEAD(&port->phy_list);
+ port->ha = sas_ha;
+
+ spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ /* initialize the ports and discovery */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_port *port = sas_ha->sas_port[i];
+
+ sas_init_port(port, sas_ha, i);
+ sas_init_disc(&port->disc, port);
+ }
+ return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ for (i = 0; i < sas_ha->num_phys; i++)
+ if (sas_ha->sas_phy[i]->port)
+ sas_deform_port(sas_ha->sas_phy[i], 0);
+
+}
+
+const work_func_t sas_port_event_fns[PORT_NUM_EVENTS] = {
+ [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+ [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+ [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+ [PORTE_TIMER_EVENT] = sas_porte_timer_event,
+ [PORTE_HARD_RESET] = sas_porte_hard_reset,
+};
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
new file mode 100644
index 0000000..3322934
--- /dev/null
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -0,0 +1,992 @@
+/*
+ * Serial Attached SCSI (SAS) class SCSI Host glue.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/kthread.h>
+#include <linux/firmware.h>
+#include <linux/export.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/sas_ata.h>
+#include "../scsi_sas_internal.h"
+#include "../scsi_transport_api.h"
+#include "../scsi_priv.h"
+
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/freezer.h>
+#include <linux/gfp.h>
+#include <linux/scatterlist.h>
+#include <linux/libata.h>
+
+/* record final status and free the task */
+static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task)
+{
+ struct task_status_struct *ts = &task->task_status;
+ int hs = 0, stat = 0;
+
+ if (ts->resp == SAS_TASK_UNDELIVERED) {
+ /* transport error */
+ hs = DID_NO_CONNECT;
+ } else { /* ts->resp == SAS_TASK_COMPLETE */
+ /* task delivered, what happened afterwards? */
+ switch (ts->stat) {
+ case SAS_DEV_NO_RESPONSE:
+ case SAS_INTERRUPTED:
+ case SAS_PHY_DOWN:
+ case SAS_NAK_R_ERR:
+ case SAS_OPEN_TO:
+ hs = DID_NO_CONNECT;
+ break;
+ case SAS_DATA_UNDERRUN:
+ scsi_set_resid(sc, ts->residual);
+ if (scsi_bufflen(sc) - scsi_get_resid(sc) < sc->underflow)
+ hs = DID_ERROR;
+ break;
+ case SAS_DATA_OVERRUN:
+ hs = DID_ERROR;
+ break;
+ case SAS_QUEUE_FULL:
+ hs = DID_SOFT_ERROR; /* retry */
+ break;
+ case SAS_DEVICE_UNKNOWN:
+ hs = DID_BAD_TARGET;
+ break;
+ case SAS_SG_ERR:
+ hs = DID_PARITY;
+ break;
+ case SAS_OPEN_REJECT:
+ if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
+ hs = DID_SOFT_ERROR; /* retry */
+ else
+ hs = DID_ERROR;
+ break;
+ case SAS_PROTO_RESPONSE:
+ SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+ "task; please report this\n",
+ task->dev->port->ha->sas_ha_name);
+ break;
+ case SAS_ABORTED_TASK:
+ hs = DID_ABORT;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ memcpy(sc->sense_buffer, ts->buf,
+ min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+ stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ default:
+ stat = ts->stat;
+ break;
+ }
+ }
+
+ sc->result = (hs << 16) | stat;
+ ASSIGN_SAS_TASK(sc, NULL);
+ sas_free_task(task);
+}
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+ struct scsi_cmnd *sc = task->uldd_task;
+ struct domain_device *dev = task->dev;
+ struct sas_ha_struct *ha = dev->port->ha;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->done_lock, flags);
+ if (test_bit(SAS_HA_FROZEN, &ha->state))
+ task = NULL;
+ else
+ ASSIGN_SAS_TASK(sc, NULL);
+ spin_unlock_irqrestore(&dev->done_lock, flags);
+
+ if (unlikely(!task)) {
+ /* task will be completed by the error handler */
+ SAS_DPRINTK("task done but aborted\n");
+ return;
+ }
+
+ if (unlikely(!sc)) {
+ SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+ sas_free_task(task);
+ return;
+ }
+
+ sas_end_task(sc, task);
+ sc->scsi_done(sc);
+}
+
+static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
+ struct domain_device *dev,
+ gfp_t gfp_flags)
+{
+ struct sas_task *task = sas_alloc_task(gfp_flags);
+ struct scsi_lun lun;
+
+ if (!task)
+ return NULL;
+
+ task->uldd_task = cmd;
+ ASSIGN_SAS_TASK(cmd, task);
+
+ task->dev = dev;
+ task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
+
+ task->ssp_task.retry_count = 1;
+ int_to_scsilun(cmd->device->lun, &lun);
+ memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
+ task->ssp_task.task_attr = TASK_ATTR_SIMPLE;
+ task->ssp_task.cmd = cmd;
+
+ task->scatter = scsi_sglist(cmd);
+ task->num_scatter = scsi_sg_count(cmd);
+ task->total_xfer_len = scsi_bufflen(cmd);
+ task->data_dir = cmd->sc_data_direction;
+
+ task->task_done = sas_scsi_task_done;
+
+ return task;
+}
+
+int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+{
+ struct sas_internal *i = to_sas_internal(host->transportt);
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_task *task;
+ int res = 0;
+
+ /* If the device fell off, no sense in issuing commands */
+ if (test_bit(SAS_DEV_GONE, &dev->state)) {
+ cmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
+ }
+
+ if (dev_is_sata(dev)) {
+ spin_lock_irq(dev->sata_dev.ap->lock);
+ res = ata_sas_queuecmd(cmd, dev->sata_dev.ap);
+ spin_unlock_irq(dev->sata_dev.ap->lock);
+ return res;
+ }
+
+ task = sas_create_task(cmd, dev, GFP_ATOMIC);
+ if (!task)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ res = i->dft->lldd_execute_task(task, GFP_ATOMIC);
+ if (res)
+ goto out_free_task;
+ return 0;
+
+out_free_task:
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ if (res == -SAS_QUEUE_FULL)
+ cmd->result = DID_SOFT_ERROR << 16; /* retry */
+ else
+ cmd->result = DID_ERROR << 16;
+out_done:
+ cmd->scsi_done(cmd);
+ return 0;
+}
+
+static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
+{
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_task *task = TO_SAS_TASK(cmd);
+
+ /* At this point, we only get called following an actual abort
+ * of the task, so we should be guaranteed not to be racing with
+ * any completions from the LLD. Task is freed after this.
+ */
+ sas_end_task(cmd, task);
+
+ if (dev_is_sata(dev)) {
+ /* defer commands to libata so that libata EH can
+ * handle ata qcs correctly
+ */
+ list_move_tail(&cmd->eh_entry, &sas_ha->eh_ata_q);
+ return;
+ }
+
+ /* now finish the command and move it on to the error
+ * handler done list, this also takes it off the
+ * error handler pending list.
+ */
+ scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
+}
+
+static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ if (cmd->device->sdev_target == my_cmd->device->sdev_target &&
+ cmd->device->lun == my_cmd->device->lun)
+ sas_eh_finish_cmd(cmd);
+ }
+}
+
+static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
+ struct domain_device *dev)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *x = cmd_to_domain_dev(cmd);
+
+ if (x == dev)
+ sas_eh_finish_cmd(cmd);
+ }
+}
+
+static void sas_scsi_clear_queue_port(struct list_head *error_q,
+ struct asd_sas_port *port)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct asd_sas_port *x = dev->port;
+
+ if (x == port)
+ sas_eh_finish_cmd(cmd);
+ }
+}
+
+enum task_disposition {
+ TASK_IS_DONE,
+ TASK_IS_ABORTED,
+ TASK_IS_AT_LU,
+ TASK_IS_NOT_AT_LU,
+ TASK_ABORT_FAILED,
+};
+
+static enum task_disposition sas_scsi_find_task(struct sas_task *task)
+{
+ unsigned long flags;
+ int i, res;
+ struct sas_internal *si =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+ for (i = 0; i < 5; i++) {
+ SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
+ res = si->dft->lldd_abort_task(task);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
+ task);
+ return TASK_IS_DONE;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __func__, task);
+ return TASK_IS_ABORTED;
+ } else if (si->dft->lldd_query_task) {
+ SAS_DPRINTK("%s: querying task 0x%p\n",
+ __func__, task);
+ res = si->dft->lldd_query_task(task);
+ switch (res) {
+ case TMF_RESP_FUNC_SUCC:
+ SAS_DPRINTK("%s: task 0x%p at LU\n",
+ __func__, task);
+ return TASK_IS_AT_LU;
+ case TMF_RESP_FUNC_COMPLETE:
+ SAS_DPRINTK("%s: task 0x%p not at LU\n",
+ __func__, task);
+ return TASK_IS_NOT_AT_LU;
+ case TMF_RESP_FUNC_FAILED:
+ SAS_DPRINTK("%s: task 0x%p failed to abort\n",
+ __func__, task);
+ return TASK_ABORT_FAILED;
+ }
+
+ }
+ }
+ return res;
+}
+
+static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct scsi_lun lun;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ int_to_scsilun(cmd->device->lun, &lun);
+
+ SAS_DPRINTK("eh: device %llx LUN %llx has the task\n",
+ SAS_ADDR(dev->sas_addr),
+ cmd->device->lun);
+
+ if (i->dft->lldd_abort_task_set)
+ res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_clear_task_set)
+ res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
+ }
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_lu_reset)
+ res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+ }
+
+ return res;
+}
+
+static int sas_recover_I_T(struct domain_device *dev)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+ SAS_ADDR(dev->sas_addr));
+
+ if (i->dft->lldd_I_T_nexus_reset)
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+
+ return res;
+}
+
+/* take a reference on the last known good phy for this device */
+struct sas_phy *sas_get_local_phy(struct domain_device *dev)
+{
+ struct sas_ha_struct *ha = dev->port->ha;
+ struct sas_phy *phy;
+ unsigned long flags;
+
+ /* a published domain device always has a valid phy, it may be
+ * stale, but it is never NULL
+ */
+ BUG_ON(!dev->phy);
+
+ spin_lock_irqsave(&ha->phy_port_lock, flags);
+ phy = dev->phy;
+ get_device(&phy->dev);
+ spin_unlock_irqrestore(&ha->phy_port_lock, flags);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(sas_get_local_phy);
+
+static void sas_wait_eh(struct domain_device *dev)
+{
+ struct sas_ha_struct *ha = dev->port->ha;
+ DEFINE_WAIT(wait);
+
+ if (dev_is_sata(dev)) {
+ ata_port_wait_eh(dev->sata_dev.ap);
+ return;
+ }
+ retry:
+ spin_lock_irq(&ha->lock);
+
+ while (test_bit(SAS_DEV_EH_PENDING, &dev->state)) {
+ prepare_to_wait(&ha->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&ha->lock);
+ schedule();
+ spin_lock_irq(&ha->lock);
+ }
+ finish_wait(&ha->eh_wait_q, &wait);
+
+ spin_unlock_irq(&ha->lock);
+
+ /* make sure SCSI EH is complete */
+ if (scsi_host_in_recovery(ha->core.shost)) {
+ msleep(10);
+ goto retry;
+ }
+}
+EXPORT_SYMBOL(sas_wait_eh);
+
+static int sas_queue_reset(struct domain_device *dev, int reset_type,
+ u64 lun, int wait)
+{
+ struct sas_ha_struct *ha = dev->port->ha;
+ int scheduled = 0, tries = 100;
+
+ /* ata: promote lun reset to bus reset */
+ if (dev_is_sata(dev)) {
+ sas_ata_schedule_reset(dev);
+ if (wait)
+ sas_ata_wait_eh(dev);
+ return SUCCESS;
+ }
+
+ while (!scheduled && tries--) {
+ spin_lock_irq(&ha->lock);
+ if (!test_bit(SAS_DEV_EH_PENDING, &dev->state) &&
+ !test_bit(reset_type, &dev->state)) {
+ scheduled = 1;
+ ha->eh_active++;
+ list_add_tail(&dev->ssp_dev.eh_list_node, &ha->eh_dev_q);
+ set_bit(SAS_DEV_EH_PENDING, &dev->state);
+ set_bit(reset_type, &dev->state);
+ int_to_scsilun(lun, &dev->ssp_dev.reset_lun);
+ scsi_schedule_eh(ha->core.shost);
+ }
+ spin_unlock_irq(&ha->lock);
+
+ if (wait)
+ sas_wait_eh(dev);
+
+ if (scheduled)
+ return SUCCESS;
+ }
+
+ SAS_DPRINTK("%s reset of %s failed\n",
+ reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus",
+ dev_name(&dev->rphy->dev));
+
+ return FAILED;
+}
+
+int sas_eh_abort_handler(struct scsi_cmnd *cmd)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct sas_task *task = TO_SAS_TASK(cmd);
+ struct Scsi_Host *host = cmd->device->host;
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_internal *i = to_sas_internal(host->transportt);
+ unsigned long flags;
+
+ if (!i->dft->lldd_abort_task)
+ return FAILED;
+
+ spin_lock_irqsave(host->host_lock, flags);
+ /* We cannot do async aborts for SATA devices */
+ if (dev_is_sata(dev) && !host->host_eh_scheduled) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return FAILED;
+ }
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ if (task)
+ res = i->dft->lldd_abort_task(task);
+ else
+ SAS_DPRINTK("no task to abort\n");
+ if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
+ return SUCCESS;
+
+ return FAILED;
+}
+EXPORT_SYMBOL_GPL(sas_eh_abort_handler);
+
+/* Attempt to send a LUN reset message to a device */
+int sas_eh_device_reset_handler(struct scsi_cmnd *cmd)
+{
+ int res;
+ struct scsi_lun lun;
+ struct Scsi_Host *host = cmd->device->host;
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_internal *i = to_sas_internal(host->transportt);
+
+ if (current != host->ehandler)
+ return sas_queue_reset(dev, SAS_DEV_LU_RESET, cmd->device->lun, 0);
+
+ int_to_scsilun(cmd->device->lun, &lun);
+
+ if (!i->dft->lldd_lu_reset)
+ return FAILED;
+
+ res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+ if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
+ return SUCCESS;
+
+ return FAILED;
+}
+
+int sas_eh_target_reset_handler(struct scsi_cmnd *cmd)
+{
+ int res;
+ struct Scsi_Host *host = cmd->device->host;
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_internal *i = to_sas_internal(host->transportt);
+
+ if (current != host->ehandler)
+ return sas_queue_reset(dev, SAS_DEV_RESET, 0, 0);
+
+ if (!i->dft->lldd_I_T_nexus_reset)
+ return FAILED;
+
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+ if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE ||
+ res == -ENODEV)
+ return SUCCESS;
+
+ return FAILED;
+}
+
+/* Try to reset a device */
+static int try_to_reset_cmd_device(struct scsi_cmnd *cmd)
+{
+ int res;
+ struct Scsi_Host *shost = cmd->device->host;
+
+ if (!shost->hostt->eh_device_reset_handler)
+ goto try_target_reset;
+
+ res = shost->hostt->eh_device_reset_handler(cmd);
+ if (res == SUCCESS)
+ return res;
+
+try_target_reset:
+ if (shost->hostt->eh_target_reset_handler)
+ return shost->hostt->eh_target_reset_handler(cmd);
+
+ return FAILED;
+}
+
+static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *work_q)
+{
+ struct scsi_cmnd *cmd, *n;
+ enum task_disposition res = TASK_IS_DONE;
+ int tmf_resp, need_reset;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+ unsigned long flags;
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ LIST_HEAD(done);
+
+ /* clean out any commands that won the completion vs eh race */
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_task *task;
+
+ spin_lock_irqsave(&dev->done_lock, flags);
+ /* by this point the lldd has either observed
+ * SAS_HA_FROZEN and is leaving the task alone, or has
+ * won the race with eh and decided to complete it
+ */
+ task = TO_SAS_TASK(cmd);
+ spin_unlock_irqrestore(&dev->done_lock, flags);
+
+ if (!task)
+ list_move_tail(&cmd->eh_entry, &done);
+ }
+
+ Again:
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
+ struct sas_task *task = TO_SAS_TASK(cmd);
+
+ list_del_init(&cmd->eh_entry);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if (need_reset) {
+ SAS_DPRINTK("%s: task 0x%p requests reset\n",
+ __func__, task);
+ goto reset;
+ }
+
+ SAS_DPRINTK("trying to find task 0x%p\n", task);
+ res = sas_scsi_find_task(task);
+
+ switch (res) {
+ case TASK_IS_DONE:
+ SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
+ task);
+ sas_eh_finish_cmd(cmd);
+ continue;
+ case TASK_IS_ABORTED:
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __func__, task);
+ sas_eh_finish_cmd(cmd);
+ continue;
+ case TASK_IS_AT_LU:
+ SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ reset:
+ tmf_resp = sas_recover_lu(task->dev, cmd);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("dev %016llx LU %llx is "
+ "recovered\n",
+ SAS_ADDR(task->dev),
+ cmd->device->lun);
+ sas_eh_finish_cmd(cmd);
+ sas_scsi_clear_queue_lu(work_q, cmd);
+ goto Again;
+ }
+ /* fallthrough */
+ case TASK_IS_NOT_AT_LU:
+ case TASK_ABORT_FAILED:
+ SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+ task);
+ tmf_resp = sas_recover_I_T(task->dev);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE ||
+ tmf_resp == -ENODEV) {
+ struct domain_device *dev = task->dev;
+ SAS_DPRINTK("I_T %016llx recovered\n",
+ SAS_ADDR(task->dev->sas_addr));
+ sas_eh_finish_cmd(cmd);
+ sas_scsi_clear_queue_I_T(work_q, dev);
+ goto Again;
+ }
+ /* Hammer time :-) */
+ try_to_reset_cmd_device(cmd);
+ if (i->dft->lldd_clear_nexus_port) {
+ struct asd_sas_port *port = task->dev->port;
+ SAS_DPRINTK("clearing nexus for port:%d\n",
+ port->id);
+ res = i->dft->lldd_clear_nexus_port(port);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus port:%d "
+ "succeeded\n", port->id);
+ sas_eh_finish_cmd(cmd);
+ sas_scsi_clear_queue_port(work_q,
+ port);
+ goto Again;
+ }
+ }
+ if (i->dft->lldd_clear_nexus_ha) {
+ SAS_DPRINTK("clear nexus ha\n");
+ res = i->dft->lldd_clear_nexus_ha(ha);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus ha "
+ "succeeded\n");
+ sas_eh_finish_cmd(cmd);
+ goto clear_q;
+ }
+ }
+ /* If we are here -- this means that no amount
+ * of effort could recover from errors. Quite
+ * possibly the HA just disappeared.
+ */
+ SAS_DPRINTK("error from device %llx, LUN %llx "
+ "couldn't be recovered in any way\n",
+ SAS_ADDR(task->dev->sas_addr),
+ cmd->device->lun);
+
+ sas_eh_finish_cmd(cmd);
+ goto clear_q;
+ }
+ }
+ out:
+ list_splice_tail(&done, work_q);
+ list_splice_tail_init(&ha->eh_ata_q, work_q);
+ return;
+
+ clear_q:
+ SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry)
+ sas_eh_finish_cmd(cmd);
+ goto out;
+}
+
+static void sas_eh_handle_resets(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ /* handle directed resets to sas devices */
+ spin_lock_irq(&ha->lock);
+ while (!list_empty(&ha->eh_dev_q)) {
+ struct domain_device *dev;
+ struct ssp_device *ssp;
+
+ ssp = list_entry(ha->eh_dev_q.next, typeof(*ssp), eh_list_node);
+ list_del_init(&ssp->eh_list_node);
+ dev = container_of(ssp, typeof(*dev), ssp_dev);
+ kref_get(&dev->kref);
+ WARN_ONCE(dev_is_sata(dev), "ssp reset to ata device?\n");
+
+ spin_unlock_irq(&ha->lock);
+
+ if (test_and_clear_bit(SAS_DEV_LU_RESET, &dev->state))
+ i->dft->lldd_lu_reset(dev, ssp->reset_lun.scsi_lun);
+
+ if (test_and_clear_bit(SAS_DEV_RESET, &dev->state))
+ i->dft->lldd_I_T_nexus_reset(dev);
+
+ sas_put_device(dev);
+ spin_lock_irq(&ha->lock);
+ clear_bit(SAS_DEV_EH_PENDING, &dev->state);
+ ha->eh_active--;
+ }
+ spin_unlock_irq(&ha->lock);
+}
+
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ LIST_HEAD(eh_work_q);
+ int tries = 0;
+ bool retry;
+
+retry:
+ tries++;
+ retry = true;
+ spin_lock_irq(shost->host_lock);
+ list_splice_init(&shost->eh_cmd_q, &eh_work_q);
+ spin_unlock_irq(shost->host_lock);
+
+ SAS_DPRINTK("Enter %s busy: %d failed: %d\n",
+ __func__, scsi_host_busy(shost), shost->host_failed);
+ /*
+ * Deal with commands that still have SAS tasks (i.e. they didn't
+ * complete via the normal sas_task completion mechanism),
+ * SAS_HA_FROZEN gives eh dominion over all sas_task completion.
+ */
+ set_bit(SAS_HA_FROZEN, &ha->state);
+ sas_eh_handle_sas_errors(shost, &eh_work_q);
+ clear_bit(SAS_HA_FROZEN, &ha->state);
+ if (list_empty(&eh_work_q))
+ goto out;
+
+ /*
+ * Now deal with SCSI commands that completed ok but have a an error
+ * code (and hopefully sense data) attached. This is roughly what
+ * scsi_unjam_host does, but we skip scsi_eh_abort_cmds because any
+ * command we see here has no sas_task and is thus unknown to the HA.
+ */
+ sas_ata_eh(shost, &eh_work_q, &ha->eh_done_q);
+ if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q))
+ scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q);
+
+out:
+ sas_eh_handle_resets(shost);
+
+ /* now link into libata eh --- if we have any ata devices */
+ sas_ata_strategy_handler(shost);
+
+ scsi_eh_flush_done_q(&ha->eh_done_q);
+
+ /* check if any new eh work was scheduled during the last run */
+ spin_lock_irq(&ha->lock);
+ if (ha->eh_active == 0) {
+ shost->host_eh_scheduled = 0;
+ retry = false;
+ }
+ spin_unlock_irq(&ha->lock);
+
+ if (retry)
+ goto retry;
+
+ SAS_DPRINTK("--- Exit %s: busy: %d failed: %d tries: %d\n",
+ __func__, scsi_host_busy(shost),
+ shost->host_failed, tries);
+}
+
+int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+
+ if (dev_is_sata(dev))
+ return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg);
+
+ return -EINVAL;
+}
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct domain_device *found_dev = NULL;
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->phy_port_lock, flags);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_port *port = ha->sas_port[i];
+ struct domain_device *dev;
+
+ spin_lock(&port->dev_list_lock);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (rphy == dev->rphy) {
+ found_dev = dev;
+ spin_unlock(&port->dev_list_lock);
+ goto found;
+ }
+ }
+ spin_unlock(&port->dev_list_lock);
+ }
+ found:
+ spin_unlock_irqrestore(&ha->phy_port_lock, flags);
+
+ return found_dev;
+}
+
+int sas_target_alloc(struct scsi_target *starget)
+{
+ struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
+ struct domain_device *found_dev = sas_find_dev_by_rphy(rphy);
+
+ if (!found_dev)
+ return -ENODEV;
+
+ kref_get(&found_dev->kref);
+ starget->hostdata = found_dev;
+ return 0;
+}
+
+#define SAS_DEF_QD 256
+
+int sas_slave_configure(struct scsi_device *scsi_dev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+
+ BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
+
+ if (dev_is_sata(dev)) {
+ ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap);
+ return 0;
+ }
+
+ sas_read_port_mode_page(scsi_dev);
+
+ if (scsi_dev->tagged_supported) {
+ scsi_change_queue_depth(scsi_dev, SAS_DEF_QD);
+ } else {
+ SAS_DPRINTK("device %llx, LUN %llx doesn't support "
+ "TCQ\n", SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
+ scsi_change_queue_depth(scsi_dev, 1);
+ }
+
+ scsi_dev->allow_restart = 1;
+
+ return 0;
+}
+
+int sas_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+
+ if (dev_is_sata(dev))
+ return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth);
+
+ if (!sdev->tagged_supported)
+ depth = 1;
+ return scsi_change_queue_depth(sdev, depth);
+}
+
+int sas_bios_param(struct scsi_device *scsi_dev,
+ struct block_device *bdev,
+ sector_t capacity, int *hsc)
+{
+ hsc[0] = 255;
+ hsc[1] = 63;
+ sector_div(capacity, 255*63);
+ hsc[2] = capacity;
+
+ return 0;
+}
+
+/*
+ * Tell an upper layer that it needs to initiate an abort for a given task.
+ * This should only ever be called by an LLDD.
+ */
+void sas_task_abort(struct sas_task *task)
+{
+ struct scsi_cmnd *sc = task->uldd_task;
+
+ /* Escape for libsas internal commands */
+ if (!sc) {
+ struct sas_task_slow *slow = task->slow_task;
+
+ if (!slow)
+ return;
+ if (!del_timer(&slow->timer))
+ return;
+ slow->timer.function(&slow->timer);
+ return;
+ }
+
+ if (dev_is_sata(task->dev)) {
+ sas_ata_task_abort(task);
+ } else {
+ struct request_queue *q = sc->device->request_queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_abort_request(sc->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ }
+}
+
+void sas_target_destroy(struct scsi_target *starget)
+{
+ struct domain_device *found_dev = starget->hostdata;
+
+ if (!found_dev)
+ return;
+
+ starget->hostdata = NULL;
+ sas_put_device(found_dev);
+}
+
+#define SAS_STRING_ADDR_SIZE 16
+
+int sas_request_addr(struct Scsi_Host *shost, u8 *addr)
+{
+ int res;
+ const struct firmware *fw;
+
+ res = request_firmware(&fw, "sas_addr", &shost->shost_gendev);
+ if (res)
+ return res;
+
+ if (fw->size < SAS_STRING_ADDR_SIZE) {
+ res = -ENODEV;
+ goto out;
+ }
+
+ res = hex2bin(addr, fw->data, strnlen(fw->data, SAS_ADDR_SIZE * 2) / 2);
+ if (res)
+ goto out;
+
+out:
+ release_firmware(fw);
+ return res;
+}
+EXPORT_SYMBOL_GPL(sas_request_addr);
+
+EXPORT_SYMBOL_GPL(sas_queuecommand);
+EXPORT_SYMBOL_GPL(sas_target_alloc);
+EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_change_queue_depth);
+EXPORT_SYMBOL_GPL(sas_bios_param);
+EXPORT_SYMBOL_GPL(sas_task_abort);
+EXPORT_SYMBOL_GPL(sas_phy_reset);
+EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
+EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_target_destroy);
+EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/libsas/sas_task.c b/drivers/scsi/libsas/sas_task.c
new file mode 100644
index 0000000..a78e5bd
--- /dev/null
+++ b/drivers/scsi/libsas/sas_task.c
@@ -0,0 +1,37 @@
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <scsi/sas.h>
+#include <scsi/libsas.h>
+
+/* fill task_status_struct based on SSP response frame */
+void sas_ssp_task_response(struct device *dev, struct sas_task *task,
+ struct ssp_response_iu *iu)
+{
+ struct task_status_struct *tstat = &task->task_status;
+
+ tstat->resp = SAS_TASK_COMPLETE;
+
+ if (iu->datapres == 0)
+ tstat->stat = iu->status;
+ else if (iu->datapres == 1)
+ tstat->stat = iu->resp_data[3];
+ else if (iu->datapres == 2) {
+ tstat->stat = SAM_STAT_CHECK_CONDITION;
+ tstat->buf_valid_size =
+ min_t(int, SAS_STATUS_BUF_SIZE,
+ be32_to_cpu(iu->sense_data_len));
+ memcpy(tstat->buf, iu->sense_data, tstat->buf_valid_size);
+
+ if (iu->status != SAM_STAT_CHECK_CONDITION)
+ dev_printk(KERN_WARNING, dev,
+ "dev %llx sent sense data, but "
+ "stat(%x) is not CHECK CONDITION\n",
+ SAS_ADDR(task->dev->sas_addr),
+ iu->status);
+ }
+ else
+ /* when datapres contains corrupt/unknown value... */
+ tstat->stat = SAM_STAT_CHECK_CONDITION;
+}
+EXPORT_SYMBOL_GPL(sas_ssp_task_response);
+