v4.19.13 snapshot.
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
new file mode 100644
index 0000000..ca03af8
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.c
@@ -0,0 +1,267 @@
+/*
+ * pm.c - Common OMAP2+ power management-related code
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_opp.h>
+#include <linux/export.h>
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+
+#include <asm/system_misc.h>
+
+#include "omap_device.h"
+#include "common.h"
+
+#include "soc.h"
+#include "prcm-common.h"
+#include "voltage.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "pm.h"
+
+#ifdef CONFIG_SUSPEND
+/*
+ * omap_pm_suspend: points to a function that does the SoC-specific
+ * suspend work
+ */
+static int (*omap_pm_suspend)(void);
+#endif
+
+#ifdef CONFIG_PM
+/**
+ * struct omap2_oscillator - Describe the board main oscillator latencies
+ * @startup_time: oscillator startup latency
+ * @shutdown_time: oscillator shutdown latency
+ */
+struct omap2_oscillator {
+ u32 startup_time;
+ u32 shutdown_time;
+};
+
+static struct omap2_oscillator oscillator = {
+ .startup_time = ULONG_MAX,
+ .shutdown_time = ULONG_MAX,
+};
+
+void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
+{
+ oscillator.startup_time = tstart;
+ oscillator.shutdown_time = tshut;
+}
+
+void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
+{
+ if (!tstart || !tshut)
+ return;
+
+ *tstart = oscillator.startup_time;
+ *tshut = oscillator.shutdown_time;
+}
+#endif
+
+int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
+{
+ clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+/*
+ * This API is to be called during init to set the various voltage
+ * domains to the voltage as per the opp table. Typically we boot up
+ * at the nominal voltage. So this function finds out the rate of
+ * the clock associated with the voltage domain, finds out the correct
+ * opp entry and sets the voltage domain to the voltage specified
+ * in the opp entry
+ */
+static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
+ const char *oh_name)
+{
+ struct voltagedomain *voltdm;
+ struct clk *clk;
+ struct dev_pm_opp *opp;
+ unsigned long freq, bootup_volt;
+ struct device *dev;
+
+ if (!vdd_name || !clk_name || !oh_name) {
+ pr_err("%s: invalid parameters\n", __func__);
+ goto exit;
+ }
+
+ if (!strncmp(oh_name, "mpu", 3))
+ /*
+ * All current OMAPs share voltage rail and clock
+ * source, so CPU0 is used to represent the MPU-SS.
+ */
+ dev = get_cpu_device(0);
+ else
+ dev = omap_device_get_by_hwmod_name(oh_name);
+
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
+ voltdm = voltdm_lookup(vdd_name);
+ if (!voltdm) {
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
+ __func__, vdd_name);
+ goto exit;
+ }
+
+ clk = clk_get(NULL, clk_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
+ goto exit;
+ }
+
+ freq = clk_get_rate(clk);
+ clk_put(clk);
+
+ opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp)) {
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
+ __func__, vdd_name);
+ goto exit;
+ }
+
+ bootup_volt = dev_pm_opp_get_voltage(opp);
+ dev_pm_opp_put(opp);
+
+ if (!bootup_volt) {
+ pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
+ __func__, vdd_name);
+ goto exit;
+ }
+
+ voltdm_scale(voltdm, bootup_volt);
+ return 0;
+
+exit:
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
+ return -EINVAL;
+}
+
+#ifdef CONFIG_SUSPEND
+static int omap_pm_enter(suspend_state_t suspend_state)
+{
+ int ret = 0;
+
+ if (!omap_pm_suspend)
+ return -ENOENT; /* XXX doublecheck */
+
+ switch (suspend_state) {
+ case PM_SUSPEND_MEM:
+ ret = omap_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int omap_pm_begin(suspend_state_t state)
+{
+ cpu_idle_poll_ctrl(true);
+ if (soc_is_omap34xx())
+ omap_prcm_irq_prepare();
+ return 0;
+}
+
+static void omap_pm_end(void)
+{
+ cpu_idle_poll_ctrl(false);
+}
+
+static void omap_pm_wake(void)
+{
+ if (soc_is_omap34xx())
+ omap_prcm_irq_complete();
+}
+
+static const struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap_pm_begin,
+ .end = omap_pm_end,
+ .enter = omap_pm_enter,
+ .wake = omap_pm_wake,
+ .valid = suspend_valid_only_mem,
+};
+
+/**
+ * omap_common_suspend_init - Set common suspend routines for OMAP SoCs
+ * @pm_suspend: function pointer to SoC specific suspend function
+ */
+void omap_common_suspend_init(void *pm_suspend)
+{
+ omap_pm_suspend = pm_suspend;
+ suspend_set_ops(&omap_pm_ops);
+}
+#endif /* CONFIG_SUSPEND */
+
+static void __init omap3_init_voltages(void)
+{
+ if (!soc_is_omap34xx())
+ return;
+
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
+}
+
+static void __init omap4_init_voltages(void)
+{
+ if (!soc_is_omap44xx())
+ return;
+
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
+}
+
+int __maybe_unused omap_pm_nop_init(void)
+{
+ return 0;
+}
+
+int (*omap_pm_soc_init)(void);
+
+int __init omap2_common_pm_late_init(void)
+{
+ int error;
+
+ if (!omap_pm_soc_init)
+ return 0;
+
+ /* Init the voltage layer */
+ omap3_twl_init();
+ omap4_twl_init();
+ omap_voltage_late_init();
+
+ /* Initialize the voltages */
+ omap3_init_voltages();
+ omap4_init_voltages();
+
+ /* Smartreflex device init */
+ omap_devinit_smartreflex();
+
+ error = omap_pm_soc_init();
+ if (error)
+ pr_warn("%s: pm soc init failed: %i\n", __func__, error);
+
+ omap2_clk_enable_autoidle_all();
+
+ return 0;
+}
+omap_late_initcall(omap2_common_pm_late_init);