Update Linux to v5.10.157
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.157.tar.xz
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7b30d9e98d8c465d6b44de8e7433b4a40b3289ba
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 1433260..347fb3d 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -25,6 +25,12 @@
[USB_ENDPOINT_XFER_INT] = "intr",
};
+/**
+ * usb_ep_type_string() - Returns human readable-name of the endpoint type.
+ * @ep_type: The endpoint type to return human-readable name for. If it's not
+ * any of the types: USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT},
+ * usually got by usb_endpoint_type(), the string 'unknown' will be returned.
+ */
const char *usb_ep_type_string(int ep_type)
{
if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
@@ -69,6 +75,19 @@
[USB_SPEED_SUPER_PLUS] = "super-speed-plus",
};
+static const char *const ssp_rate[] = {
+ [USB_SSP_GEN_UNKNOWN] = "UNKNOWN",
+ [USB_SSP_GEN_2x1] = "super-speed-plus-gen2x1",
+ [USB_SSP_GEN_1x2] = "super-speed-plus-gen1x2",
+ [USB_SSP_GEN_2x2] = "super-speed-plus-gen2x2",
+};
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
const char *usb_speed_string(enum usb_device_speed speed)
{
if (speed < 0 || speed >= ARRAY_SIZE(speed_names))
@@ -77,6 +96,14 @@
}
EXPORT_SYMBOL_GPL(usb_speed_string);
+/**
+ * usb_get_maximum_speed - Get maximum requested speed for a given USB
+ * controller.
+ * @dev: Pointer to the given USB controller device
+ *
+ * The function gets the maximum speed string from property "maximum-speed",
+ * and returns the corresponding enum usb_device_speed.
+ */
enum usb_device_speed usb_get_maximum_speed(struct device *dev)
{
const char *maximum_speed;
@@ -86,12 +113,44 @@
if (ret < 0)
return USB_SPEED_UNKNOWN;
- ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
+ ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+ if (ret > 0)
+ return USB_SPEED_SUPER_PLUS;
+ ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
return (ret < 0) ? USB_SPEED_UNKNOWN : ret;
}
EXPORT_SYMBOL_GPL(usb_get_maximum_speed);
+/**
+ * usb_get_maximum_ssp_rate - Get the signaling rate generation and lane count
+ * of a SuperSpeed Plus capable device.
+ * @dev: Pointer to the given USB controller device
+ *
+ * If the string from "maximum-speed" property is super-speed-plus-genXxY where
+ * 'X' is the generation number and 'Y' is the number of lanes, then this
+ * function returns the corresponding enum usb_ssp_rate.
+ */
+enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev)
+{
+ const char *maximum_speed;
+ int ret;
+
+ ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+ if (ret < 0)
+ return USB_SSP_GEN_UNKNOWN;
+
+ ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+ return (ret < 0) ? USB_SSP_GEN_UNKNOWN : ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_ssp_rate);
+
+/**
+ * usb_state_string - Returns human readable name for the state.
+ * @state: The state to return a human-readable name for. If it's not
+ * any of the states devices in usb_device_state_string enum,
+ * the string UNKNOWN will be returned.
+ */
const char *usb_state_string(enum usb_device_state state)
{
static const char *const names[] = {
@@ -141,6 +200,47 @@
}
EXPORT_SYMBOL_GPL(usb_get_dr_mode);
+/**
+ * usb_decode_interval - Decode bInterval into the time expressed in 1us unit
+ * @epd: The descriptor of the endpoint
+ * @speed: The speed that the endpoint works as
+ *
+ * Function returns the interval expressed in 1us unit for servicing
+ * endpoint for data transfers.
+ */
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+ enum usb_device_speed speed)
+{
+ unsigned int interval = 0;
+
+ switch (usb_endpoint_type(epd)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* uframes per NAK */
+ if (speed == USB_SPEED_HIGH)
+ interval = epd->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ interval = 1 << (epd->bInterval - 1);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ /* uframes per NAK */
+ if (speed == USB_SPEED_HIGH && usb_endpoint_dir_out(epd))
+ interval = epd->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (speed >= USB_SPEED_HIGH)
+ interval = 1 << (epd->bInterval - 1);
+ else
+ interval = epd->bInterval;
+ break;
+ }
+
+ interval *= (speed >= USB_SPEED_HIGH) ? 125 : 1000;
+
+ return interval;
+}
+EXPORT_SYMBOL_GPL(usb_decode_interval);
+
#ifdef CONFIG_OF
/**
* of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
index ba849c7..f0c0e8d 100644
--- a/drivers/usb/common/debug.c
+++ b/drivers/usb/common/debug.c
@@ -207,12 +207,28 @@
snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
}
-/*
- * usb_decode_ctrl - returns a string representation of ctrl request
- */
-const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
- __u8 bRequest, __u16 wValue, __u16 wIndex,
- __u16 wLength)
+static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ u8 recip = bRequestType & USB_RECIP_MASK;
+ u8 type = bRequestType & USB_TYPE_MASK;
+
+ snprintf(str, size,
+ "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u",
+ (type == USB_TYPE_STANDARD) ? "Standard" :
+ (type == USB_TYPE_VENDOR) ? "Vendor" :
+ (type == USB_TYPE_CLASS) ? "Class" : "Unknown",
+ (recip == USB_RECIP_DEVICE) ? "Device" :
+ (recip == USB_RECIP_INTERFACE) ? "Interface" :
+ (recip == USB_RECIP_ENDPOINT) ? "Endpoint" : "Unknown",
+ (bRequestType & USB_DIR_IN) ? "IN" : "OUT",
+ bRequest, wValue, wIndex, wLength);
+}
+
+static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
{
switch (bRequest) {
case USB_REQ_GET_STATUS:
@@ -253,14 +269,48 @@
usb_decode_set_isoch_delay(wValue, str, size);
break;
default:
- snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
- bRequestType, bRequest,
- (u8)(cpu_to_le16(wValue) & 0xff),
- (u8)(cpu_to_le16(wValue) >> 8),
- (u8)(cpu_to_le16(wIndex) & 0xff),
- (u8)(cpu_to_le16(wIndex) >> 8),
- (u8)(cpu_to_le16(wLength) & 0xff),
- (u8)(cpu_to_le16(wLength) >> 8));
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+}
+
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ * This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ switch (bRequestType & USB_TYPE_MASK) {
+ case USB_TYPE_STANDARD:
+ usb_decode_ctrl_standard(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ case USB_TYPE_VENDOR:
+ case USB_TYPE_CLASS:
+ default:
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
}
return str;