Update Linux to v5.10.157
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.157.tar.xz
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7b30d9e98d8c465d6b44de8e7433b4a40b3289ba
diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c
index fe36738..9d54746 100644
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -40,7 +40,6 @@
STM32_MDMA_SHIFT(mask))
#define STM32_MDMA_GISR0 0x0000 /* MDMA Int Status Reg 1 */
-#define STM32_MDMA_GISR1 0x0004 /* MDMA Int Status Reg 2 */
/* MDMA Channel x interrupt/status register */
#define STM32_MDMA_CISR(x) (0x40 + 0x40 * (x)) /* x = 0..62 */
@@ -196,7 +195,7 @@
#define STM32_MDMA_MAX_BUF_LEN 128
#define STM32_MDMA_MAX_BLOCK_LEN 65536
-#define STM32_MDMA_MAX_CHANNELS 63
+#define STM32_MDMA_MAX_CHANNELS 32
#define STM32_MDMA_MAX_REQUESTS 256
#define STM32_MDMA_MAX_BURST 128
#define STM32_MDMA_VERY_HIGH_PRIORITY 0x11
@@ -1345,90 +1344,84 @@
static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)
{
struct stm32_mdma_device *dmadev = devid;
- struct stm32_mdma_chan *chan = devid;
- u32 reg, id, ien, status, flag;
+ struct stm32_mdma_chan *chan;
+ u32 reg, id, ccr, ien, status;
/* Find out which channel generates the interrupt */
status = readl_relaxed(dmadev->base + STM32_MDMA_GISR0);
- if (status) {
- id = __ffs(status);
- } else {
- status = readl_relaxed(dmadev->base + STM32_MDMA_GISR1);
- if (!status) {
- dev_dbg(mdma2dev(dmadev), "spurious it\n");
- return IRQ_NONE;
- }
- id = __ffs(status);
- /*
- * As GISR0 provides status for channel id from 0 to 31,
- * so GISR1 provides status for channel id from 32 to 62
- */
- id += 32;
+ if (!status) {
+ dev_dbg(mdma2dev(dmadev), "spurious it\n");
+ return IRQ_NONE;
}
+ id = __ffs(status);
chan = &dmadev->chan[id];
if (!chan) {
- dev_dbg(mdma2dev(dmadev), "MDMA channel not initialized\n");
- goto exit;
+ dev_warn(mdma2dev(dmadev), "MDMA channel not initialized\n");
+ return IRQ_NONE;
}
/* Handle interrupt for the channel */
spin_lock(&chan->vchan.lock);
- status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
- ien = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
- ien &= STM32_MDMA_CCR_IRQ_MASK;
- ien >>= 1;
+ status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(id));
+ /* Mask Channel ReQuest Active bit which can be set in case of MEM2MEM */
+ status &= ~STM32_MDMA_CISR_CRQA;
+ ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(id));
+ ien = (ccr & STM32_MDMA_CCR_IRQ_MASK) >> 1;
if (!(status & ien)) {
spin_unlock(&chan->vchan.lock);
- dev_dbg(chan2dev(chan),
- "spurious it (status=0x%04x, ien=0x%04x)\n",
- status, ien);
+ dev_warn(chan2dev(chan),
+ "spurious it (status=0x%04x, ien=0x%04x)\n",
+ status, ien);
return IRQ_NONE;
}
- flag = __ffs(status & ien);
- reg = STM32_MDMA_CIFCR(chan->id);
+ reg = STM32_MDMA_CIFCR(id);
- switch (1 << flag) {
- case STM32_MDMA_CISR_TEIF:
- id = chan->id;
- status = readl_relaxed(dmadev->base + STM32_MDMA_CESR(id));
- dev_err(chan2dev(chan), "Transfer Err: stat=0x%08x\n", status);
+ if (status & STM32_MDMA_CISR_TEIF) {
+ dev_err(chan2dev(chan), "Transfer Err: stat=0x%08x\n",
+ readl_relaxed(dmadev->base + STM32_MDMA_CESR(id)));
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CTEIF);
- break;
+ status &= ~STM32_MDMA_CISR_TEIF;
+ }
- case STM32_MDMA_CISR_CTCIF:
+ if (status & STM32_MDMA_CISR_CTCIF) {
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CCTCIF);
+ status &= ~STM32_MDMA_CISR_CTCIF;
stm32_mdma_xfer_end(chan);
- break;
+ }
- case STM32_MDMA_CISR_BRTIF:
+ if (status & STM32_MDMA_CISR_BRTIF) {
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBRTIF);
- break;
+ status &= ~STM32_MDMA_CISR_BRTIF;
+ }
- case STM32_MDMA_CISR_BTIF:
+ if (status & STM32_MDMA_CISR_BTIF) {
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBTIF);
+ status &= ~STM32_MDMA_CISR_BTIF;
chan->curr_hwdesc++;
if (chan->desc && chan->desc->cyclic) {
if (chan->curr_hwdesc == chan->desc->count)
chan->curr_hwdesc = 0;
vchan_cyclic_callback(&chan->desc->vdesc);
}
- break;
+ }
- case STM32_MDMA_CISR_TCIF:
+ if (status & STM32_MDMA_CISR_TCIF) {
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CLTCIF);
- break;
+ status &= ~STM32_MDMA_CISR_TCIF;
+ }
- default:
- dev_err(chan2dev(chan), "it %d unhandled (status=0x%04x)\n",
- 1 << flag, status);
+ if (status) {
+ stm32_mdma_set_bits(dmadev, reg, status);
+ dev_err(chan2dev(chan), "DMA error: status=0x%08x\n", status);
+ if (!(ccr & STM32_MDMA_CCR_EN))
+ dev_err(chan2dev(chan), "chan disabled by HW\n");
}
spin_unlock(&chan->vchan.lock);
-exit:
return IRQ_HANDLED;
}