Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 9ba7334..d7cb0df 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -4,6 +4,19 @@
*
* Copyright (C) 2013 Atmel Corporation
* Bo Shen <voice.shen@atmel.com>
+ *
+ * Links to reference manuals for the supported PWM chips can be found in
+ * Documentation/arm/microchip.rst.
+ *
+ * Limitations:
+ * - Periods start with the inactive level.
+ * - Hardware has to be stopped in general to update settings.
+ *
+ * Software bugs/possible improvements:
+ * - When atmel_pwm_apply() is called with state->enabled=false a change in
+ * state->polarity isn't honored.
+ * - Instead of sleeping to wait for a completed period, the interrupt
+ * functionality could be used.
*/
#include <linux/clk.h>
@@ -47,6 +60,8 @@
#define PWMV2_CPRD 0x0C
#define PWMV2_CPRDUPD 0x10
+#define PWM_MAX_PRES 10
+
struct atmel_pwm_registers {
u8 period;
u8 period_upd;
@@ -55,8 +70,7 @@
};
struct atmel_pwm_config {
- u32 max_period;
- u32 max_pres;
+ u32 period_bits;
};
struct atmel_pwm_data {
@@ -97,7 +111,7 @@
{
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
- return readl_relaxed(chip->base + base + offset);
+ return atmel_pwm_readl(chip, base + offset);
}
static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
@@ -106,7 +120,7 @@
{
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
- writel_relaxed(val, chip->base + base + offset);
+ atmel_pwm_writel(chip, base + offset, val);
}
static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
@@ -115,17 +129,27 @@
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned long long cycles = state->period;
+ int shift;
/* Calculate the period cycles and prescale value */
cycles *= clk_get_rate(atmel_pwm->clk);
do_div(cycles, NSEC_PER_SEC);
- for (*pres = 0; cycles > atmel_pwm->data->cfg.max_period; cycles >>= 1)
- (*pres)++;
+ /*
+ * The register for the period length is cfg.period_bits bits wide.
+ * So for each bit the number of clock cycles is wider divide the input
+ * clock frequency by two using pres and shift cprd accordingly.
+ */
+ shift = fls(cycles) - atmel_pwm->data->cfg.period_bits;
- if (*pres > atmel_pwm->data->cfg.max_pres) {
+ if (shift > PWM_MAX_PRES) {
dev_err(chip->dev, "pres exceeds the maximum value\n");
return -EINVAL;
+ } else if (shift > 0) {
+ *pres = shift;
+ cycles >>= *pres;
+ } else {
+ *pres = 0;
}
*cprd = cycles;
@@ -271,8 +295,48 @@
return 0;
}
+static void atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+ u32 sr, cmr;
+
+ sr = atmel_pwm_readl(atmel_pwm, PWM_SR);
+ cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+ if (sr & (1 << pwm->hwpwm)) {
+ unsigned long rate = clk_get_rate(atmel_pwm->clk);
+ u32 cdty, cprd, pres;
+ u64 tmp;
+
+ pres = cmr & PWM_CMR_CPRE_MSK;
+
+ cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->data->regs.period);
+ tmp = (u64)cprd * NSEC_PER_SEC;
+ tmp <<= pres;
+ state->period = DIV64_U64_ROUND_UP(tmp, rate);
+
+ cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->data->regs.duty);
+ tmp = (u64)(cprd - cdty) * NSEC_PER_SEC;
+ tmp <<= pres;
+ state->duty_cycle = DIV64_U64_ROUND_UP(tmp, rate);
+
+ state->enabled = true;
+ } else {
+ state->enabled = false;
+ }
+
+ if (cmr & PWM_CMR_CPOL)
+ state->polarity = PWM_POLARITY_INVERSED;
+ else
+ state->polarity = PWM_POLARITY_NORMAL;
+}
+
static const struct pwm_ops atmel_pwm_ops = {
.apply = atmel_pwm_apply,
+ .get_state = atmel_pwm_get_state,
.owner = THIS_MODULE,
};
@@ -285,8 +349,7 @@
},
.cfg = {
/* 16 bits to keep period and duty. */
- .max_period = 0xffff,
- .max_pres = 10,
+ .period_bits = 16,
},
};
@@ -299,8 +362,7 @@
},
.cfg = {
/* 16 bits to keep period and duty. */
- .max_period = 0xffff,
- .max_pres = 10,
+ .period_bits = 16,
},
};
@@ -313,8 +375,7 @@
},
.cfg = {
/* 32 bits to keep period and duty. */
- .max_period = 0xffffffff,
- .max_pres = 10,
+ .period_bits = 32,
},
};