diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 3bb5625..a0c6e88 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -24,6 +24,7 @@
 
 config OMAP_DM_TIMER
 	bool
+	select TIMER_OF
 
 config CLKBLD_I8253
 	def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
@@ -89,7 +90,7 @@
 	select TIMER_OF
 	select CLKSRC_MMIO
 	help
-	  Enables the support for the rockchip timer driver.
+	  Enables the support for the Rockchip timer driver.
 
 config ARMADA_370_XP_TIMER
 	bool "Armada 370 and XP timer driver" if COMPILE_TEST
@@ -121,7 +122,6 @@
 
 config RDA_TIMER
 	bool "RDA timer driver" if COMPILE_TEST
-	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
 	select TIMER_OF
 	help
@@ -163,13 +163,13 @@
 	select CLKSRC_MMIO
 	help
 	  Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
-	  While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
+	  where TIMER0 serves as clockevent and TIMER1 serves as clocksource.
 
 config CADENCE_TTC_TIMER
 	bool "Cadence TTC timer driver" if COMPILE_TEST
 	depends on COMMON_CLK
 	help
-	  Enables support for the cadence ttc driver.
+	  Enables support for the Cadence TTC driver.
 
 config ASM9260_TIMER
 	bool "ASM9260 timer driver" if COMPILE_TEST
@@ -191,10 +191,10 @@
 	bool "Clocksource PRCMU Timer" if COMPILE_TEST
 	depends on HAS_IOMEM
 	help
-	  Use the always on PRCMU Timer as clocksource
+	  Use the always on PRCMU Timer as clocksource.
 
 config CLPS711X_TIMER
-	bool "Cirrus logic timer driver" if COMPILE_TEST
+	bool "Cirrus Logic timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
 	help
 	  Enables support for the Cirrus Logic PS711 timer.
@@ -206,11 +206,11 @@
 	  Enables support for the Atlas7 timer.
 
 config MXS_TIMER
-	bool "Mxs timer driver" if COMPILE_TEST
+	bool "MXS timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
 	select STMP_DEVICE
 	help
-	  Enables support for the Mxs timer.
+	  Enables support for the MXS timer.
 
 config PRIMA2_TIMER
 	bool "Prima2 timer driver" if COMPILE_TEST
@@ -239,10 +239,10 @@
 	  Enables support for the Keystone timer.
 
 config INTEGRATOR_AP_TIMER
-	bool "Integrator-ap timer driver" if COMPILE_TEST
+	bool "Integrator-AP timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
 	help
-	  Enables support for the Integrator-ap timer.
+	  Enables support for the Integrator-AP timer.
 
 config CLKSRC_EFM32
 	bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
@@ -284,8 +284,8 @@
 	select TIMER_OF if OF
 	help
 	  NPS400 clocksource support.
-	  Got 64 bit counter with update rate up to 1000MHz.
-	  This counter is accessed via couple of 32 bit memory mapped registers.
+	  It has a 64-bit counter with update rate up to 1000MHz.
+	  This counter is accessed via couple of 32-bit memory-mapped registers.
 
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
@@ -293,6 +293,10 @@
 	select CLKSRC_MMIO
 	select TIMER_OF
 
+config CLKSRC_STM32_LP
+	bool "Low power clocksource for STM32 SoCs"
+	depends on MFD_STM32_LPTIMER || COMPILE_TEST
+
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
@@ -306,14 +310,14 @@
 	help
 	  These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
 	  (ARC700 as well as ARC HS38).
-	  TIMER0 serves as clockevent while TIMER1 provides clocksource
+	  TIMER0 serves as clockevent while TIMER1 provides clocksource.
 
 config ARC_TIMERS_64BIT
 	bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
 	depends on ARC_TIMERS
 	select TIMER_OF
 	help
-	  This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
+	  This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP).
 	  RTC is implemented inside the core, while GFRC sits outside the core in
 	  ARConnect IP block. Driver automatically picks one of them for clocksource
 	  as appropriate.
@@ -391,7 +395,7 @@
 	select TIMER_OF if OF
 	depends on ARM
 	help
-	  This options enables support for the ARM global timer unit
+	  This option enables support for the ARM global timer unit.
 
 config ARM_TIMER_SP804
 	bool "Support for Dual Timer SP804 module" if COMPILE_TEST
@@ -404,14 +408,14 @@
 	depends on ARM_GLOBAL_TIMER
 	default y
 	help
-	 Use ARM global timer clock source as sched_clock
+	  Use ARM global timer clock source as sched_clock.
 
 config ARMV7M_SYSTICK
 	bool "Support for the ARMv7M system time" if COMPILE_TEST
 	select TIMER_OF if OF
 	select CLKSRC_MMIO
 	help
-	  This options enables support for the ARMv7M system timer unit
+	  This option enables support for the ARMv7M system timer unit.
 
 config ATMEL_PIT
 	bool "Atmel PIT support" if COMPILE_TEST
@@ -461,7 +465,7 @@
 	bool
 	select CLKSRC_MMIO
 	help
-	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+	  Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.
 
 config OXNAS_RPS_TIMER
 	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
@@ -471,7 +475,7 @@
 	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
 
 config SYS_SUPPORTS_SH_CMT
-        bool
+	bool
 
 config MTK_TIMER
 	bool "Mediatek timer driver" if COMPILE_TEST
@@ -491,13 +495,13 @@
 	  Enables support for the Spreadtrum timer driver.
 
 config SYS_SUPPORTS_SH_MTU2
-        bool
+	bool
 
 config SYS_SUPPORTS_SH_TMU
-        bool
+	bool
 
 config SYS_SUPPORTS_EM_STI
-        bool
+	bool
 
 config CLKSRC_JCORE_PIT
 	bool "J-Core PIT timer driver" if COMPILE_TEST
@@ -524,11 +528,12 @@
 	help
 	  This enables build of a clockevent driver for the Multi-Function
 	  Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
-	  This hardware comes with 16 bit-timer registers.
+	  This hardware comes with 16-bit timer registers.
 
 config RENESAS_OSTM
 	bool "Renesas OSTM timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
+	select TIMER_OF
 	help
 	  Enables the support for the Renesas OSTM.
 
@@ -562,16 +567,16 @@
 	bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
 	select TIMER_OF
-	default y if MFD_VEXPRESS_SYSREG
+	default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
 	help
 	  This option enables clock source based on free running
 	  counter available in the "System Registers" block of
-	  ARM Versatile, RealView and Versatile Express reference
-	  platforms.
+	  ARM Versatile and Versatile Express reference platforms.
 
 config CLKSRC_MIPS_GIC
 	bool
 	depends on MIPS_GIC
+	select CLOCKSOURCE_WATCHDOG
 	select TIMER_OF
 
 config CLKSRC_TANGO_XTAL
@@ -580,7 +585,7 @@
 	select TIMER_OF
 	select CLKSRC_MMIO
 	help
-	  This enables the clocksource for Tango SoC
+	  This enables the clocksource for Tango SoC.
 
 config CLKSRC_PXA
 	bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
@@ -591,24 +596,24 @@
 	  platforms.
 
 config H8300_TMR8
-        bool "Clockevent timer for the H8300 platform" if COMPILE_TEST
-        depends on HAS_IOMEM
+	bool "Clockevent timer for the H8300 platform" if COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  This enables the 8 bits timer for the H8300 platform.
 
 config H8300_TMR16
-        bool "Clockevent timer for the H83069 platform" if COMPILE_TEST
-        depends on HAS_IOMEM
+	bool "Clockevent timer for the H83069 platform" if COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  This enables the 16 bits timer for the H8300 platform with the
-	  H83069 cpu.
+	  H83069 CPU.
 
 config H8300_TPU
-        bool "Clocksource for the H8300 platform" if COMPILE_TEST
-        depends on HAS_IOMEM
+	bool "Clocksource for the H8300 platform" if COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  This enables the clocksource for the H8300 platform with the
-	  H8S2678 cpu.
+	  H8S2678 CPU.
 
 config CLKSRC_IMX_GPT
 	bool "Clocksource using i.MX GPT" if COMPILE_TEST
@@ -617,8 +622,9 @@
 
 config CLKSRC_IMX_TPM
 	bool "Clocksource using i.MX TPM" if COMPILE_TEST
-	depends on ARM && CLKDEV_LOOKUP
+	depends on (ARM || ARM64) && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select TIMER_OF
 	help
 	  Enable this option to use IMX Timer/PWM Module (TPM) timer as
 	  clocksource.
@@ -649,9 +655,8 @@
 	  This option enables support for the Andestech ATCPIT100 timers.
 
 config RISCV_TIMER
-	bool "Timer for the RISC-V platform"
-	depends on GENERIC_SCHED_CLOCK && RISCV
-	default y
+	bool "Timer for the RISC-V platform" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
 	select TIMER_PROBE
 	select TIMER_OF
 	help
@@ -659,6 +664,15 @@
 	  is accessed via both the SBI and the rdcycle instruction.  This is
 	  required for all RISC-V systems.
 
+config CLINT_TIMER
+	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK && RISCV
+	select TIMER_PROBE
+	select TIMER_OF
+	help
+	  This option enables the CLINT timer for RISC-V systems.  The CLINT
+	  driver is usually used for NoMMU RISC-V systems.
+
 config CSKY_MP_TIMER
 	bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
 	depends on CSKY
@@ -666,8 +680,8 @@
 	help
 	  Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
 	  system.
-	  csky,mptimer is not only used in SMP system, it also could be used
-	  single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
+	  csky,mptimer is not only used in SMP system, it also could be used in
+	  single core system. It's not a mmio reg and it uses mtcr/mfcr instruction.
 
 config GX6605S_TIMER
 	bool "Gx6605s SOC system timer driver" if COMPILE_TEST
@@ -697,4 +711,33 @@
 	help
 	  Support for the timer/counter unit of the Ingenic JZ SoCs.
 
+config INGENIC_SYSOST
+	bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	select TIMER_OF
+	select IRQ_DOMAIN
+	help
+	  Support for the SYSOST of the Ingenic X Series SoCs.
+
+config INGENIC_OST
+	bool "Clocksource using the OST in Ingenic JZ SoCs"
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	help
+	  Support for the Operating System Timer of the Ingenic JZ SoCs.
+
+config MICROCHIP_PIT64B
+	bool "Microchip PIT64B support"
+	depends on OF || COMPILE_TEST
+	select CLKSRC_MMIO
+	select TIMER_OF
+	help
+	  This option enables Microchip PIT64B timer for Atmel
+	  based system. It supports the oneshot, the periodic
+	  modes and high resolution. It is used as a clocksource
+	  and a clockevent.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4dfe422..1c444cc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,6 +18,7 @@
 obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
+obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
@@ -44,6 +45,7 @@
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
+obj-$(CONFIG_CLKSRC_STM32_LP)	+= timer-stm32-lp.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
 obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
@@ -80,11 +82,15 @@
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_OST)		+= ingenic-ost.o
+obj-$(CONFIG_INGENIC_SYSOST)	+= ingenic-sysost.o
 obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
 obj-$(CONFIG_ATCPIT100_TIMER)		+= timer-atcpit100.o
 obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
+obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
 obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
 obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
 obj-$(CONFIG_HYPERV_TIMER)		+= hyperv_timer.o
+obj-$(CONFIG_MICROCHIP_PIT64B)		+= timer-microchip-pit64b.o
diff --git a/drivers/clocksource/arc_timer.c b/drivers/clocksource/arc_timer.c
index b29b5a7..de93dd1 100644
--- a/drivers/clocksource/arc_timer.c
+++ b/drivers/clocksource/arc_timer.c
@@ -334,10 +334,8 @@
 	}
 
 	ret = arc_get_timer_clk(node);
-	if (ret) {
-		pr_err("clockevent: missing clk\n");
+	if (ret)
 		return ret;
-	}
 
 	/* Needs apriori irq_set_percpu_devid() done in intc map function */
 	ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index ec6f28e..f488176 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -69,7 +69,11 @@
 static bool arch_timer_c3stop;
 static bool arch_timer_mem_use_virtual;
 static bool arch_counter_suspend_stop;
-static enum vdso_arch_clockmode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
+#ifdef CONFIG_GENERIC_GETTIMEOFDAY
+static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
+#else
+static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_NONE;
+#endif /* CONFIG_GENERIC_GETTIMEOFDAY */
 
 static cpumask_t evtstrm_available = CPU_MASK_NONE;
 static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
@@ -568,11 +572,11 @@
 	 * change both the default value and the vdso itself.
 	 */
 	if (wa->read_cntvct_el0) {
-		clocksource_counter.archdata.clock_mode = VDSO_CLOCKMODE_NONE;
+		clocksource_counter.vdso_clock_mode = VDSO_CLOCKMODE_NONE;
 		vdso_default = VDSO_CLOCKMODE_NONE;
 	} else if (wa->disable_compat_vdso && vdso_default != VDSO_CLOCKMODE_NONE) {
 		vdso_default = VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT;
-		clocksource_counter.archdata.clock_mode = vdso_default;
+		clocksource_counter.vdso_clock_mode = vdso_default;
 	}
 }
 
@@ -905,6 +909,17 @@
 	return 0;
 }
 
+static int validate_timer_rate(void)
+{
+	if (!arch_timer_rate)
+		return -EINVAL;
+
+	/* Arch timer frequency < 1MHz can cause trouble */
+	WARN_ON(arch_timer_rate < 1000000);
+
+	return 0;
+}
+
 /*
  * For historical reasons, when probing with DT we use whichever (non-zero)
  * rate was probed first, and don't verify that others match. If the first node
@@ -920,7 +935,7 @@
 		arch_timer_rate = rate;
 
 	/* Check the timer frequency. */
-	if (arch_timer_rate == 0)
+	if (validate_timer_rate())
 		pr_warn("frequency not available\n");
 }
 
@@ -999,7 +1014,7 @@
 		}
 
 		arch_timer_read_counter = rd;
-		clocksource_counter.archdata.clock_mode = vdso_default;
+		clocksource_counter.vdso_clock_mode = vdso_default;
 	} else {
 		arch_timer_read_counter = arch_counter_get_cntvct_mem;
 	}
@@ -1593,10 +1608,8 @@
 	arch_timers_present |= ARCH_TIMER_TYPE_CP15;
 
 	ret = acpi_gtdt_init(table, &platform_timer_count);
-	if (ret) {
-		pr_err("Failed to init GTDT table.\n");
+	if (ret)
 		return ret;
-	}
 
 	arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
 		acpi_gtdt_map_ppi(ARCH_TIMER_PHYS_NONSECURE_PPI);
@@ -1614,9 +1627,10 @@
 	 * CNTFRQ value. This *must* be correct.
 	 */
 	arch_timer_rate = arch_timer_get_cntfrq();
-	if (!arch_timer_rate) {
+	ret = validate_timer_rate();
+	if (ret) {
 		pr_err(FW_BUG "frequency not available.\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	arch_timer_uses_ppi = arch_timer_select_ppi();
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index b235f44..1592650 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -31,7 +31,6 @@
 	void __iomem *compare;
 	int match_mask;
 	struct clock_event_device evt;
-	struct irqaction act;
 };
 
 static void __iomem *system_clock __read_mostly;
@@ -113,12 +112,9 @@
 	timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
 	timer->evt.set_next_event = bcm2835_time_set_next_event;
 	timer->evt.cpumask = cpumask_of(0);
-	timer->act.name = node->name;
-	timer->act.flags = IRQF_TIMER | IRQF_SHARED;
-	timer->act.dev_id = timer;
-	timer->act.handler = bcm2835_time_interrupt;
 
-	ret = setup_irq(irq, &timer->act);
+	ret = request_irq(irq, bcm2835_time_interrupt, IRQF_TIMER | IRQF_SHARED,
+			  node->name, timer);
 	if (ret) {
 		pr_err("Can't set up timer IRQ\n");
 		goto err_timer_free;
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 5c40be9..a50ab5c 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -160,12 +160,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction kona_timer_irq = {
-	.name = "Kona Timer Tick",
-	.flags = IRQF_TIMER,
-	.handler = kona_timer_interrupt,
-};
-
 static int __init kona_timer_init(struct device_node *node)
 {
 	u32 freq;
@@ -192,7 +186,9 @@
 	kona_timer_disable_and_clear(timers.tmr_regs);
 
 	kona_timer_clockevents_init();
-	setup_irq(timers.tmr_irq, &kona_timer_irq);
+	if (request_irq(timers.tmr_irq, kona_timer_interrupt, IRQF_TIMER,
+			"Kona Timer Tick", NULL))
+		pr_err("%s: request_irq() failed\n", "Kona Timer Tick");
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
 
 	return 0;
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 10ce695..f5f24a9 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -271,15 +271,10 @@
 	dw_ced->ced.rating = rating;
 	dw_ced->ced.name = name;
 
-	dw_ced->irqaction.name		= dw_ced->ced.name;
-	dw_ced->irqaction.handler	= dw_apb_clockevent_irq;
-	dw_ced->irqaction.dev_id	= &dw_ced->ced;
-	dw_ced->irqaction.irq		= irq;
-	dw_ced->irqaction.flags		= IRQF_TIMER | IRQF_IRQPOLL |
-					  IRQF_NOBALANCING;
-
 	dw_ced->eoi = apbt_eoi;
-	err = setup_irq(irq, &dw_ced->irqaction);
+	err = request_irq(irq, dw_apb_clockevent_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+			  dw_ced->ced.name, &dw_ced->ced);
 	if (err) {
 		pr_err("failed to request timer irq\n");
 		kfree(dw_ced);
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 6921b91..ab3ddeb 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -73,7 +73,7 @@
 
 	timer_get_base_and_rate(event_timer, &iobase, &rate);
 
-	ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+	ced = dw_apb_clockevent_init(-1, event_timer->name, 300, iobase, irq,
 				     rate);
 	if (!ced)
 		panic("Unable to initialise clockevent device");
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index 9039df4..ab190df 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -279,9 +279,7 @@
 static int em_sti_probe(struct platform_device *pdev)
 {
 	struct em_sti_priv *p;
-	struct resource *res;
-	int irq;
-	int ret;
+	int irq, ret;
 
 	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
 	if (p == NULL)
@@ -295,8 +293,7 @@
 		return irq;
 
 	/* map memory, let base point to the STI instance */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	p->base = devm_ioremap_resource(&pdev->dev, res);
+	p->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(p->base))
 		return PTR_ERR(p->base);
 
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 74cb299..fabad79 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -4,7 +4,7 @@
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 MCT(Multi-Core Timer) support
+ * Exynos4 MCT(Multi-Core Timer) support
 */
 
 #include <linux/interrupt.h>
@@ -329,19 +329,15 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mct_comp_event_irq = {
-	.name		= "mct_comp_irq",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= exynos4_mct_comp_isr,
-	.dev_id		= &mct_comp_device,
-};
-
 static int exynos4_clockevent_init(void)
 {
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mct_comp_device, clk_rate,
 					0xf, 0xffffffff);
-	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+	if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
+			IRQF_TIMER | IRQF_IRQPOLL, "mct_comp_irq",
+			&mct_comp_device))
+		pr_err("%s: request_irq() failed\n", "mct_comp_irq");
 
 	return 0;
 }
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 36933e2..ba04cb3 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/sched_clock.h>
 #include <linux/mm.h>
+#include <linux/cpuhotplug.h>
 #include <clocksource/hyperv_timer.h>
 #include <asm/hyperv-tlfs.h>
 #include <asm/mshyperv.h>
@@ -30,6 +31,15 @@
  * mechanism is used when running on older versions of Hyper-V
  * that don't support Direct Mode. While Hyper-V provides
  * four stimer's per CPU, Linux uses only stimer0.
+ *
+ * Because Direct Mode does not require processing a VMbus
+ * message, stimer interrupts can be enabled earlier in the
+ * process of booting a CPU, and consistent with when timer
+ * interrupts are enabled for other clocksource drivers.
+ * However, for legacy versions of Hyper-V when Direct Mode
+ * is not enabled, setting up stimer interrupts must be
+ * delayed until VMbus is initialized and can process the
+ * interrupt message.
  */
 static bool direct_mode_enabled;
 
@@ -56,7 +66,7 @@
 {
 	u64 current_tick;
 
-	current_tick = hyperv_cs->read(NULL);
+	current_tick = hv_read_reference_counter();
 	current_tick += delta;
 	hv_init_timer(0, current_tick);
 	return 0;
@@ -102,17 +112,12 @@
 /*
  * hv_stimer_init - Per-cpu initialization of the clockevent
  */
-void hv_stimer_init(unsigned int cpu)
+static int hv_stimer_init(unsigned int cpu)
 {
 	struct clock_event_device *ce;
 
-	/*
-	 * Synthetic timers are always available except on old versions of
-	 * Hyper-V on x86.  In that case, just return as Linux will use a
-	 * clocksource based on emulated PIT or LAPIC timer hardware.
-	 */
-	if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
-		return;
+	if (!hv_clock_event)
+		return 0;
 
 	ce = per_cpu_ptr(hv_clock_event, cpu);
 	ce->name = "Hyper-V clockevent";
@@ -127,28 +132,55 @@
 					HV_CLOCK_HZ,
 					HV_MIN_DELTA_TICKS,
 					HV_MAX_MAX_DELTA_TICKS);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(hv_stimer_init);
 
 /*
  * hv_stimer_cleanup - Per-cpu cleanup of the clockevent
  */
-void hv_stimer_cleanup(unsigned int cpu)
+int hv_stimer_cleanup(unsigned int cpu)
 {
 	struct clock_event_device *ce;
 
-	/* Turn off clockevent device */
-	if (ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE) {
-		ce = per_cpu_ptr(hv_clock_event, cpu);
+	if (!hv_clock_event)
+		return 0;
+
+	/*
+	 * In the legacy case where Direct Mode is not enabled
+	 * (which can only be on x86/64), stimer cleanup happens
+	 * relatively early in the CPU offlining process. We
+	 * must unbind the stimer-based clockevent device so
+	 * that the LAPIC timer can take over until clockevents
+	 * are no longer needed in the offlining process. Note
+	 * that clockevents_unbind_device() eventually calls
+	 * hv_ce_shutdown().
+	 *
+	 * The unbind should not be done when Direct Mode is
+	 * enabled because we may be on an architecture where
+	 * there are no other clockevent devices to fallback to.
+	 */
+	ce = per_cpu_ptr(hv_clock_event, cpu);
+	if (direct_mode_enabled)
 		hv_ce_shutdown(ce);
-	}
+	else
+		clockevents_unbind_device(ce, cpu);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(hv_stimer_cleanup);
 
 /* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */
-int hv_stimer_alloc(int sint)
+int hv_stimer_alloc(void)
 {
-	int ret;
+	int ret = 0;
+
+	/*
+	 * Synthetic timers are always available except on old versions of
+	 * Hyper-V on x86.  In that case, return as error as Linux will use a
+	 * clockevent based on emulated LAPIC timer hardware.
+	 */
+	if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
+		return -EINVAL;
 
 	hv_clock_event = alloc_percpu(struct clock_event_device);
 	if (!hv_clock_event)
@@ -159,22 +191,78 @@
 	if (direct_mode_enabled) {
 		ret = hv_setup_stimer0_irq(&stimer0_irq, &stimer0_vector,
 				hv_stimer0_isr);
-		if (ret) {
-			free_percpu(hv_clock_event);
-			hv_clock_event = NULL;
-			return ret;
-		}
-	}
+		if (ret)
+			goto free_percpu;
 
-	stimer0_message_sint = sint;
-	return 0;
+		/*
+		 * Since we are in Direct Mode, stimer initialization
+		 * can be done now with a CPUHP value in the same range
+		 * as other clockevent devices.
+		 */
+		ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING,
+				"clockevents/hyperv/stimer:starting",
+				hv_stimer_init, hv_stimer_cleanup);
+		if (ret < 0)
+			goto free_stimer0_irq;
+	}
+	return ret;
+
+free_stimer0_irq:
+	hv_remove_stimer0_irq(stimer0_irq);
+	stimer0_irq = 0;
+free_percpu:
+	free_percpu(hv_clock_event);
+	hv_clock_event = NULL;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(hv_stimer_alloc);
 
+/*
+ * hv_stimer_legacy_init -- Called from the VMbus driver to handle
+ * the case when Direct Mode is not enabled, and the stimer
+ * must be initialized late in the CPU onlining process.
+ *
+ */
+void hv_stimer_legacy_init(unsigned int cpu, int sint)
+{
+	if (direct_mode_enabled)
+		return;
+
+	/*
+	 * This function gets called by each vCPU, so setting the
+	 * global stimer_message_sint value each time is conceptually
+	 * not ideal, but the value passed in is always the same and
+	 * it avoids introducing yet another interface into this
+	 * clocksource driver just to set the sint in the legacy case.
+	 */
+	stimer0_message_sint = sint;
+	(void)hv_stimer_init(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_init);
+
+/*
+ * hv_stimer_legacy_cleanup -- Called from the VMbus driver to
+ * handle the case when Direct Mode is not enabled, and the
+ * stimer must be cleaned up early in the CPU offlining
+ * process.
+ */
+void hv_stimer_legacy_cleanup(unsigned int cpu)
+{
+	if (direct_mode_enabled)
+		return;
+	(void)hv_stimer_cleanup(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup);
+
+
 /* hv_stimer_free - Free global resources allocated by hv_stimer_alloc() */
 void hv_stimer_free(void)
 {
-	if (direct_mode_enabled && (stimer0_irq != 0)) {
+	if (!hv_clock_event)
+		return;
+
+	if (direct_mode_enabled) {
+		cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING);
 		hv_remove_stimer0_irq(stimer0_irq);
 		stimer0_irq = 0;
 	}
@@ -190,14 +278,20 @@
 void hv_stimer_global_cleanup(void)
 {
 	int	cpu;
-	struct clock_event_device *ce;
 
-	if (ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE) {
-		for_each_present_cpu(cpu) {
-			ce = per_cpu_ptr(hv_clock_event, cpu);
-			clockevents_unbind_device(ce, cpu);
-		}
+	/*
+	 * hv_stime_legacy_cleanup() will stop the stimer if Direct
+	 * Mode is not enabled, and fallback to the LAPIC timer.
+	 */
+	for_each_present_cpu(cpu) {
+		hv_stimer_legacy_cleanup(cpu);
 	}
+
+	/*
+	 * If Direct Mode is enabled, the cpuhp teardown callback
+	 * (hv_stimer_cleanup) will be run on all CPUs to stop the
+	 * stimers.
+	 */
 	hv_stimer_free();
 }
 EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
@@ -208,22 +302,33 @@
  * the other that uses the TSC reference page feature as defined in the
  * TLFS.  The MSR version is for compatibility with old versions of
  * Hyper-V and 32-bit x86.  The TSC reference page version is preferred.
+ *
+ * The Hyper-V clocksource ratings of 250 are chosen to be below the
+ * TSC clocksource rating of 300.  In configurations where Hyper-V offers
+ * an InvariantTSC, the TSC is not marked "unstable", so the TSC clocksource
+ * is available and preferred.  With the higher rating, it will be the
+ * default.  On older hardware and Hyper-V versions, the TSC is marked
+ * "unstable", so no TSC clocksource is created and the selected Hyper-V
+ * clocksource will be the default.
  */
 
-struct clocksource *hyperv_cs;
-EXPORT_SYMBOL_GPL(hyperv_cs);
+u64 (*hv_read_reference_counter)(void);
+EXPORT_SYMBOL_GPL(hv_read_reference_counter);
 
-static struct ms_hyperv_tsc_page tsc_pg __aligned(PAGE_SIZE);
+static union {
+	struct ms_hyperv_tsc_page page;
+	u8 reserved[PAGE_SIZE];
+} tsc_pg __aligned(PAGE_SIZE);
 
 struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
 {
-	return &tsc_pg;
+	return &tsc_pg.page;
 }
 EXPORT_SYMBOL_GPL(hv_get_tsc_page);
 
-static u64 notrace read_hv_clock_tsc(struct clocksource *arg)
+static u64 notrace read_hv_clock_tsc(void)
 {
-	u64 current_tick = hv_read_tsc_page(&tsc_pg);
+	u64 current_tick = hv_read_tsc_page(hv_get_tsc_page());
 
 	if (current_tick == U64_MAX)
 		hv_get_time_ref_count(current_tick);
@@ -231,21 +336,58 @@
 	return current_tick;
 }
 
-static u64 read_hv_sched_clock_tsc(void)
+static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
 {
-	return (read_hv_clock_tsc(NULL) - hv_sched_clock_offset) *
+	return read_hv_clock_tsc();
+}
+
+static u64 notrace read_hv_sched_clock_tsc(void)
+{
+	return (read_hv_clock_tsc() - hv_sched_clock_offset) *
 		(NSEC_PER_SEC / HV_CLOCK_HZ);
 }
 
+static void suspend_hv_clock_tsc(struct clocksource *arg)
+{
+	u64 tsc_msr;
+
+	/* Disable the TSC page */
+	hv_get_reference_tsc(tsc_msr);
+	tsc_msr &= ~BIT_ULL(0);
+	hv_set_reference_tsc(tsc_msr);
+}
+
+
+static void resume_hv_clock_tsc(struct clocksource *arg)
+{
+	phys_addr_t phys_addr = virt_to_phys(&tsc_pg);
+	u64 tsc_msr;
+
+	/* Re-enable the TSC page */
+	hv_get_reference_tsc(tsc_msr);
+	tsc_msr &= GENMASK_ULL(11, 0);
+	tsc_msr |= BIT_ULL(0) | (u64)phys_addr;
+	hv_set_reference_tsc(tsc_msr);
+}
+
+static int hv_cs_enable(struct clocksource *cs)
+{
+	hv_enable_vdso_clocksource();
+	return 0;
+}
+
 static struct clocksource hyperv_cs_tsc = {
 	.name	= "hyperv_clocksource_tsc_page",
-	.rating	= 400,
-	.read	= read_hv_clock_tsc,
+	.rating	= 250,
+	.read	= read_hv_clock_tsc_cs,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+	.suspend= suspend_hv_clock_tsc,
+	.resume	= resume_hv_clock_tsc,
+	.enable = hv_cs_enable,
 };
 
-static u64 notrace read_hv_clock_msr(struct clocksource *arg)
+static u64 notrace read_hv_clock_msr(void)
 {
 	u64 current_tick;
 	/*
@@ -257,16 +399,21 @@
 	return current_tick;
 }
 
-static u64 read_hv_sched_clock_msr(void)
+static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
 {
-	return (read_hv_clock_msr(NULL) - hv_sched_clock_offset) *
+	return read_hv_clock_msr();
+}
+
+static u64 notrace read_hv_sched_clock_msr(void)
+{
+	return (read_hv_clock_msr() - hv_sched_clock_offset) *
 		(NSEC_PER_SEC / HV_CLOCK_HZ);
 }
 
 static struct clocksource hyperv_cs_msr = {
 	.name	= "hyperv_clocksource_msr",
-	.rating	= 400,
-	.read	= read_hv_clock_msr,
+	.rating	= 250,
+	.read	= read_hv_clock_msr_cs,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -279,8 +426,8 @@
 	if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
 		return false;
 
-	hyperv_cs = &hyperv_cs_tsc;
-	phys_addr = virt_to_phys(&tsc_pg);
+	hv_read_reference_counter = read_hv_clock_tsc;
+	phys_addr = virt_to_phys(hv_get_tsc_page());
 
 	/*
 	 * The Hyper-V TLFS specifies to preserve the value of reserved
@@ -297,7 +444,7 @@
 	hv_set_clocksource_vdso(hyperv_cs_tsc);
 	clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
 
-	hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+	hv_sched_clock_offset = hv_read_reference_counter();
 	hv_setup_sched_clock(read_hv_sched_clock_tsc);
 
 	return true;
@@ -319,10 +466,10 @@
 	if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
 		return;
 
-	hyperv_cs = &hyperv_cs_msr;
+	hv_read_reference_counter = read_hv_clock_msr;
 	clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
 
-	hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+	hv_sched_clock_offset = hv_read_reference_counter();
 	hv_setup_sched_clock(read_hv_sched_clock_msr);
 }
 EXPORT_SYMBOL_GPL(hv_init_clocksource);
diff --git a/drivers/clocksource/ingenic-ost.c b/drivers/clocksource/ingenic-ost.c
new file mode 100644
index 0000000..6af2470
--- /dev/null
+++ b/drivers/clocksource/ingenic-ost.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU Operating System Timer driver
+ *
+ * Copyright (C) 2016 Maarten ter Huurne <maarten@treewalker.org>
+ * Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#define TCU_OST_TCSR_MASK	0xffc0
+#define TCU_OST_TCSR_CNT_MD	BIT(15)
+
+#define TCU_OST_CHANNEL		15
+
+/*
+ * The TCU_REG_OST_CNT{L,R} from <linux/mfd/ingenic-tcu.h> are only for the
+ * regmap; these are for use with the __iomem pointer.
+ */
+#define OST_REG_CNTL		0x4
+#define OST_REG_CNTH		0x8
+
+struct ingenic_ost_soc_info {
+	bool is64bit;
+};
+
+struct ingenic_ost {
+	void __iomem *regs;
+	struct clk *clk;
+
+	struct clocksource cs;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static u64 notrace ingenic_ost_read_cntl(void)
+{
+	/* Read using __iomem pointer instead of regmap to avoid locking */
+	return readl(ingenic_ost->regs + OST_REG_CNTL);
+}
+
+static u64 notrace ingenic_ost_read_cnth(void)
+{
+	/* Read using __iomem pointer instead of regmap to avoid locking */
+	return readl(ingenic_ost->regs + OST_REG_CNTH);
+}
+
+static u64 notrace ingenic_ost_clocksource_readl(struct clocksource *cs)
+{
+	return ingenic_ost_read_cntl();
+}
+
+static u64 notrace ingenic_ost_clocksource_readh(struct clocksource *cs)
+{
+	return ingenic_ost_read_cnth();
+}
+
+static int __init ingenic_ost_probe(struct platform_device *pdev)
+{
+	const struct ingenic_ost_soc_info *soc_info;
+	struct device *dev = &pdev->dev;
+	struct ingenic_ost *ost;
+	struct clocksource *cs;
+	struct regmap *map;
+	unsigned long rate;
+	int err;
+
+	soc_info = device_get_match_data(dev);
+	if (!soc_info)
+		return -EINVAL;
+
+	ost = devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
+	if (!ost)
+		return -ENOMEM;
+
+	ingenic_ost = ost;
+
+	ost->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ost->regs))
+		return PTR_ERR(ost->regs);
+
+	map = device_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(map)) {
+		dev_err(dev, "regmap not found");
+		return PTR_ERR(map);
+	}
+
+	ost->clk = devm_clk_get(dev, "ost");
+	if (IS_ERR(ost->clk))
+		return PTR_ERR(ost->clk);
+
+	err = clk_prepare_enable(ost->clk);
+	if (err)
+		return err;
+
+	/* Clear counter high/low registers */
+	if (soc_info->is64bit)
+		regmap_write(map, TCU_REG_OST_CNTL, 0);
+	regmap_write(map, TCU_REG_OST_CNTH, 0);
+
+	/* Don't reset counter at compare value. */
+	regmap_update_bits(map, TCU_REG_OST_TCSR,
+			   TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
+
+	rate = clk_get_rate(ost->clk);
+
+	/* Enable OST TCU channel */
+	regmap_write(map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
+
+	cs = &ost->cs;
+	cs->name	= "ingenic-ost";
+	cs->rating	= 320;
+	cs->flags	= CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->mask	= CLOCKSOURCE_MASK(32);
+
+	if (soc_info->is64bit)
+		cs->read = ingenic_ost_clocksource_readl;
+	else
+		cs->read = ingenic_ost_clocksource_readh;
+
+	err = clocksource_register_hz(cs, rate);
+	if (err) {
+		dev_err(dev, "clocksource registration failed");
+		clk_disable_unprepare(ost->clk);
+		return err;
+	}
+
+	if (soc_info->is64bit)
+		sched_clock_register(ingenic_ost_read_cntl, 32, rate);
+	else
+		sched_clock_register(ingenic_ost_read_cnth, 32, rate);
+
+	return 0;
+}
+
+static int __maybe_unused ingenic_ost_suspend(struct device *dev)
+{
+	struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+	clk_disable(ost->clk);
+
+	return 0;
+}
+
+static int __maybe_unused ingenic_ost_resume(struct device *dev)
+{
+	struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+	return clk_enable(ost->clk);
+}
+
+static const struct dev_pm_ops __maybe_unused ingenic_ost_pm_ops = {
+	/* _noirq: We want the OST clock to be gated last / ungated first */
+	.suspend_noirq = ingenic_ost_suspend,
+	.resume_noirq  = ingenic_ost_resume,
+};
+
+static const struct ingenic_ost_soc_info jz4725b_ost_soc_info = {
+	.is64bit = false,
+};
+
+static const struct ingenic_ost_soc_info jz4770_ost_soc_info = {
+	.is64bit = true,
+};
+
+static const struct of_device_id ingenic_ost_of_match[] = {
+	{ .compatible = "ingenic,jz4725b-ost", .data = &jz4725b_ost_soc_info, },
+	{ .compatible = "ingenic,jz4770-ost", .data = &jz4770_ost_soc_info, },
+	{ }
+};
+
+static struct platform_driver ingenic_ost_driver = {
+	.driver = {
+		.name = "ingenic-ost",
+#ifdef CONFIG_PM_SUSPEND
+		.pm = &ingenic_ost_pm_ops,
+#endif
+		.of_match_table = ingenic_ost_of_match,
+	},
+};
+builtin_platform_driver_probe(ingenic_ost_driver, ingenic_ost_probe);
diff --git a/drivers/clocksource/ingenic-sysost.c b/drivers/clocksource/ingenic-sysost.c
new file mode 100644
index 0000000..e77d584
--- /dev/null
+++ b/drivers/clocksource/ingenic-sysost.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic XBurst SoCs SYSOST clocks driver
+ * Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,sysost.h>
+
+/* OST register offsets */
+#define OST_REG_OSTCCR			0x00
+#define OST_REG_OSTCR			0x08
+#define OST_REG_OSTFR			0x0c
+#define OST_REG_OSTMR			0x10
+#define OST_REG_OST1DFR			0x14
+#define OST_REG_OST1CNT			0x18
+#define OST_REG_OST2CNTL		0x20
+#define OST_REG_OSTCNT2HBUF		0x24
+#define OST_REG_OSTESR			0x34
+#define OST_REG_OSTECR			0x38
+
+/* bits within the OSTCCR register */
+#define OSTCCR_PRESCALE1_MASK	0x3
+#define OSTCCR_PRESCALE2_MASK	0xc
+#define OSTCCR_PRESCALE1_LSB	0
+#define OSTCCR_PRESCALE2_LSB	2
+
+/* bits within the OSTCR register */
+#define OSTCR_OST1CLR			BIT(0)
+#define OSTCR_OST2CLR			BIT(1)
+
+/* bits within the OSTFR register */
+#define OSTFR_FFLAG				BIT(0)
+
+/* bits within the OSTMR register */
+#define OSTMR_FMASK				BIT(0)
+
+/* bits within the OSTESR register */
+#define OSTESR_OST1ENS			BIT(0)
+#define OSTESR_OST2ENS			BIT(1)
+
+/* bits within the OSTECR register */
+#define OSTECR_OST1ENC			BIT(0)
+#define OSTECR_OST2ENC			BIT(1)
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+};
+
+struct ingenic_ost_clk_info {
+	struct clk_init_data init_data;
+	u8 ostccr_reg;
+};
+
+struct ingenic_ost_clk {
+	struct clk_hw hw;
+	unsigned int idx;
+	struct ingenic_ost *ost;
+	const struct ingenic_ost_clk_info *info;
+};
+
+struct ingenic_ost {
+	void __iomem *base;
+	const struct ingenic_soc_info *soc_info;
+	struct clk *clk, *percpu_timer_clk, *global_timer_clk;
+	struct clock_event_device cevt;
+	struct clocksource cs;
+	char name[20];
+
+	struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static inline struct ingenic_ost_clk *to_ost_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct ingenic_ost_clk, hw);
+}
+
+static unsigned long ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	unsigned int prescale;
+
+	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+	prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> OSTCCR_PRESCALE1_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static unsigned long ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	unsigned int prescale;
+
+	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+	prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> OSTCCR_PRESCALE2_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_ost_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+	u8 prescale;
+
+	for (prescale = 0; prescale < 2; prescale++)
+		if ((rate >> (prescale * 2)) <= req_rate)
+			return prescale;
+
+	return 2; /* /16 divider */
+}
+
+static long ingenic_ost_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	u8 prescale;
+
+	if (req_rate > rate)
+		return rate;
+
+	prescale = ingenic_ost_get_prescale(rate, req_rate);
+
+	return rate >> (prescale * 2);
+}
+
+static int ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+	int val;
+
+	val = readl(ost_clk->ost->base + info->ostccr_reg);
+	val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << OSTCCR_PRESCALE1_LSB);
+	writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+	return 0;
+}
+
+static int ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+	int val;
+
+	val = readl(ost_clk->ost->base + info->ostccr_reg);
+	val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << OSTCCR_PRESCALE2_LSB);
+	writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_ost_percpu_timer_ops = {
+	.recalc_rate	= ingenic_ost_percpu_timer_recalc_rate,
+	.round_rate		= ingenic_ost_round_rate,
+	.set_rate		= ingenic_ost_percpu_timer_set_rate,
+};
+
+static const struct clk_ops ingenic_ost_global_timer_ops = {
+	.recalc_rate	= ingenic_ost_global_timer_recalc_rate,
+	.round_rate		= ingenic_ost_round_rate,
+	.set_rate		= ingenic_ost_global_timer_set_rate,
+};
+
+static const char * const ingenic_ost_clk_parents[] = { "ext" };
+
+static const struct ingenic_ost_clk_info ingenic_ost_clk_info[] = {
+	[OST_CLK_PERCPU_TIMER] = {
+		.init_data = {
+			.name = "percpu timer",
+			.parent_names = ingenic_ost_clk_parents,
+			.num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+			.ops = &ingenic_ost_percpu_timer_ops,
+			.flags = CLK_SET_RATE_UNGATE,
+		},
+		.ostccr_reg = OST_REG_OSTCCR,
+	},
+
+	[OST_CLK_GLOBAL_TIMER] = {
+		.init_data = {
+			.name = "global timer",
+			.parent_names = ingenic_ost_clk_parents,
+			.num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+			.ops = &ingenic_ost_global_timer_ops,
+			.flags = CLK_SET_RATE_UNGATE,
+		},
+		.ostccr_reg = OST_REG_OSTCCR,
+	},
+};
+
+static u64 notrace ingenic_ost_global_timer_read_cntl(void)
+{
+	struct ingenic_ost *ost = ingenic_ost;
+	unsigned int count;
+
+	count = readl(ost->base + OST_REG_OST2CNTL);
+
+	return count;
+}
+
+static u64 notrace ingenic_ost_clocksource_read(struct clocksource *cs)
+{
+	return ingenic_ost_global_timer_read_cntl();
+}
+
+static inline struct ingenic_ost *to_ingenic_ost(struct clock_event_device *evt)
+{
+	return container_of(evt, struct ingenic_ost, cevt);
+}
+
+static int ingenic_ost_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+	return 0;
+}
+
+static int ingenic_ost_cevt_set_next(unsigned long next,
+				     struct clock_event_device *evt)
+{
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel((u32)~OSTFR_FFLAG, ost->base + OST_REG_OSTFR);
+	writel(next, ost->base + OST_REG_OST1DFR);
+	writel(OSTCR_OST1CLR, ost->base + OST_REG_OSTCR);
+	writel(OSTESR_OST1ENS, ost->base + OST_REG_OSTESR);
+	writel((u32)~OSTMR_FMASK, ost->base + OST_REG_OSTMR);
+
+	return 0;
+}
+
+static irqreturn_t ingenic_ost_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+	if (evt->event_handler)
+		evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_ost_register_clock(struct ingenic_ost *ost,
+			unsigned int idx, const struct ingenic_ost_clk_info *info,
+			struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_ost_clk *ost_clk;
+	int val, err;
+
+	ost_clk = kzalloc(sizeof(*ost_clk), GFP_KERNEL);
+	if (!ost_clk)
+		return -ENOMEM;
+
+	ost_clk->hw.init = &info->init_data;
+	ost_clk->idx = idx;
+	ost_clk->info = info;
+	ost_clk->ost = ost;
+
+	/* Reset clock divider */
+	val = readl(ost->base + info->ostccr_reg);
+	val &= ~(OSTCCR_PRESCALE1_MASK | OSTCCR_PRESCALE2_MASK);
+	writel(val, ost->base + info->ostccr_reg);
+
+	err = clk_hw_register(NULL, &ost_clk->hw);
+	if (err) {
+		kfree(ost_clk);
+		return err;
+	}
+
+	clocks->hws[idx] = &ost_clk->hw;
+
+	return 0;
+}
+
+static struct clk * __init ingenic_ost_get_clock(struct device_node *np, int id)
+{
+	struct of_phandle_args args;
+
+	args.np = np;
+	args.args_count = 1;
+	args.args[0] = id;
+
+	return of_clk_get_from_provider(&args);
+}
+
+static int __init ingenic_ost_percpu_timer_init(struct device_node *np,
+					 struct ingenic_ost *ost)
+{
+	unsigned int timer_virq, channel = OST_CLK_PERCPU_TIMER;
+	unsigned long rate;
+	int err;
+
+	ost->percpu_timer_clk = ingenic_ost_get_clock(np, channel);
+	if (IS_ERR(ost->percpu_timer_clk))
+		return PTR_ERR(ost->percpu_timer_clk);
+
+	err = clk_prepare_enable(ost->percpu_timer_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(ost->percpu_timer_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	timer_virq = of_irq_get(np, 0);
+	if (!timer_virq) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	snprintf(ost->name, sizeof(ost->name), "OST percpu timer");
+
+	err = request_irq(timer_virq, ingenic_ost_cevt_cb, IRQF_TIMER,
+			  ost->name, &ost->cevt);
+	if (err)
+		goto err_irq_dispose_mapping;
+
+	ost->cevt.cpumask = cpumask_of(smp_processor_id());
+	ost->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	ost->cevt.name = ost->name;
+	ost->cevt.rating = 400;
+	ost->cevt.set_state_shutdown = ingenic_ost_cevt_set_state_shutdown;
+	ost->cevt.set_next_event = ingenic_ost_cevt_set_next;
+
+	clockevents_config_and_register(&ost->cevt, rate, 4, 0xffffffff);
+
+	return 0;
+
+err_irq_dispose_mapping:
+	irq_dispose_mapping(timer_virq);
+err_clk_disable:
+	clk_disable_unprepare(ost->percpu_timer_clk);
+err_clk_put:
+	clk_put(ost->percpu_timer_clk);
+	return err;
+}
+
+static int __init ingenic_ost_global_timer_init(struct device_node *np,
+					       struct ingenic_ost *ost)
+{
+	unsigned int channel = OST_CLK_GLOBAL_TIMER;
+	struct clocksource *cs = &ost->cs;
+	unsigned long rate;
+	int err;
+
+	ost->global_timer_clk = ingenic_ost_get_clock(np, channel);
+	if (IS_ERR(ost->global_timer_clk))
+		return PTR_ERR(ost->global_timer_clk);
+
+	err = clk_prepare_enable(ost->global_timer_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(ost->global_timer_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	/* Clear counter CNT registers */
+	writel(OSTCR_OST2CLR, ost->base + OST_REG_OSTCR);
+
+	/* Enable OST channel */
+	writel(OSTESR_OST2ENS, ost->base + OST_REG_OSTESR);
+
+	cs->name = "ingenic-ost";
+	cs->rating = 400;
+	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->mask = CLOCKSOURCE_MASK(32);
+	cs->read = ingenic_ost_clocksource_read;
+
+	err = clocksource_register_hz(cs, rate);
+	if (err)
+		goto err_clk_disable;
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(ost->global_timer_clk);
+err_clk_put:
+	clk_put(ost->global_timer_clk);
+	return err;
+}
+
+static const struct ingenic_soc_info x1000_soc_info = {
+	.num_channels = 2,
+};
+
+static const struct of_device_id __maybe_unused ingenic_ost_of_match[] __initconst = {
+	{ .compatible = "ingenic,x1000-ost", .data = &x1000_soc_info, },
+	{ /* sentinel */ }
+};
+
+static int __init ingenic_ost_probe(struct device_node *np)
+{
+	const struct of_device_id *id = of_match_node(ingenic_ost_of_match, np);
+	struct ingenic_ost *ost;
+	unsigned int i;
+	int ret;
+
+	ost = kzalloc(sizeof(*ost), GFP_KERNEL);
+	if (!ost)
+		return -ENOMEM;
+
+	ost->base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	if (IS_ERR(ost->base)) {
+		pr_err("%s: Failed to map OST registers\n", __func__);
+		ret = PTR_ERR(ost->base);
+		goto err_free_ost;
+	}
+
+	ost->clk = of_clk_get_by_name(np, "ost");
+	if (IS_ERR(ost->clk)) {
+		ret = PTR_ERR(ost->clk);
+		pr_crit("%s: Cannot get OST clock\n", __func__);
+		goto err_free_ost;
+	}
+
+	ret = clk_prepare_enable(ost->clk);
+	if (ret) {
+		pr_crit("%s: Unable to enable OST clock\n", __func__);
+		goto err_put_clk;
+	}
+
+	ost->soc_info = id->data;
+
+	ost->clocks = kzalloc(struct_size(ost->clocks, hws, ost->soc_info->num_channels),
+			      GFP_KERNEL);
+	if (!ost->clocks) {
+		ret = -ENOMEM;
+		goto err_clk_disable;
+	}
+
+	ost->clocks->num = ost->soc_info->num_channels;
+
+	for (i = 0; i < ost->clocks->num; i++) {
+		ret = ingenic_ost_register_clock(ost, i, &ingenic_ost_clk_info[i], ost->clocks);
+		if (ret) {
+			pr_crit("%s: Cannot register clock %d\n", __func__, i);
+			goto err_unregister_ost_clocks;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ost->clocks);
+	if (ret) {
+		pr_crit("%s: Cannot add OF clock provider\n", __func__);
+		goto err_unregister_ost_clocks;
+	}
+
+	ingenic_ost = ost;
+
+	return 0;
+
+err_unregister_ost_clocks:
+	for (i = 0; i < ost->clocks->num; i++)
+		if (ost->clocks->hws[i])
+			clk_hw_unregister(ost->clocks->hws[i]);
+	kfree(ost->clocks);
+err_clk_disable:
+	clk_disable_unprepare(ost->clk);
+err_put_clk:
+	clk_put(ost->clk);
+err_free_ost:
+	kfree(ost);
+	return ret;
+}
+
+static int __init ingenic_ost_init(struct device_node *np)
+{
+	struct ingenic_ost *ost;
+	unsigned long rate;
+	int ret;
+
+	ret = ingenic_ost_probe(np);
+	if (ret) {
+		pr_crit("%s: Failed to initialize OST clocks: %d\n", __func__, ret);
+		return ret;
+	}
+
+	of_node_clear_flag(np, OF_POPULATED);
+
+	ost = ingenic_ost;
+	if (IS_ERR(ost))
+		return PTR_ERR(ost);
+
+	ret = ingenic_ost_global_timer_init(np, ost);
+	if (ret) {
+		pr_crit("%s: Unable to init global timer: %x\n", __func__, ret);
+		goto err_free_ingenic_ost;
+	}
+
+	ret = ingenic_ost_percpu_timer_init(np, ost);
+	if (ret)
+		goto err_ost_global_timer_cleanup;
+
+	/* Register the sched_clock at the end as there's no way to undo it */
+	rate = clk_get_rate(ost->global_timer_clk);
+	sched_clock_register(ingenic_ost_global_timer_read_cntl, 32, rate);
+
+	return 0;
+
+err_ost_global_timer_cleanup:
+	clocksource_unregister(&ost->cs);
+	clk_disable_unprepare(ost->global_timer_clk);
+	clk_put(ost->global_timer_clk);
+err_free_ingenic_ost:
+	kfree(ost);
+	return ret;
+}
+
+TIMER_OF_DECLARE(x1000_ost,  "ingenic,x1000-ost",  ingenic_ost_init);
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
index 4bbdb3d..905fd6b 100644
--- a/drivers/clocksource/ingenic-timer.c
+++ b/drivers/clocksource/ingenic-timer.c
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * JZ47xx SoCs TCU IRQ driver
+ * Ingenic SoCs TCU IRQ driver
  * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
  */
 
 #include <linux/bitops.h>
@@ -15,24 +16,35 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/overflow.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/sched_clock.h>
 
 #include <dt-bindings/clock/ingenic,tcu.h>
 
+static DEFINE_PER_CPU(call_single_data_t, ingenic_cevt_csd);
+
 struct ingenic_soc_info {
 	unsigned int num_channels;
 };
 
+struct ingenic_tcu_timer {
+	unsigned int cpu;
+	unsigned int channel;
+	struct clock_event_device cevt;
+	struct clk *clk;
+	char name[8];
+};
+
 struct ingenic_tcu {
 	struct regmap *map;
-	struct clk *timer_clk, *cs_clk;
-	unsigned int timer_channel, cs_channel;
-	struct clock_event_device cevt;
+	struct device_node *np;
+	struct clk *cs_clk;
+	unsigned int cs_channel;
 	struct clocksource cs;
-	char name[4];
 	unsigned long pwm_channels_mask;
+	struct ingenic_tcu_timer timers[];
 };
 
 static struct ingenic_tcu *ingenic_tcu;
@@ -52,16 +64,24 @@
 	return ingenic_tcu_timer_read();
 }
 
-static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt)
+static inline struct ingenic_tcu *
+to_ingenic_tcu(struct ingenic_tcu_timer *timer)
 {
-	return container_of(evt, struct ingenic_tcu, cevt);
+	return container_of(timer, struct ingenic_tcu, timers[timer->cpu]);
+}
+
+static inline struct ingenic_tcu_timer *
+to_ingenic_tcu_timer(struct clock_event_device *evt)
+{
+	return container_of(evt, struct ingenic_tcu_timer, cevt);
 }
 
 static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
 {
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
 
-	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
 
 	return 0;
 }
@@ -69,32 +89,45 @@
 static int ingenic_tcu_cevt_set_next(unsigned long next,
 				     struct clock_event_device *evt)
 {
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
 
 	if (next > 0xffff)
 		return -EINVAL;
 
-	regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next);
-	regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0);
-	regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TDFRc(timer->channel), next);
+	regmap_write(tcu->map, TCU_REG_TCNTc(timer->channel), 0);
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(timer->channel));
 
 	return 0;
 }
 
+static void ingenic_per_cpu_event_handler(void *info)
+{
+	struct clock_event_device *cevt = (struct clock_event_device *) info;
+
+	cevt->event_handler(cevt);
+}
+
 static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = dev_id;
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = dev_id;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+	call_single_data_t *csd;
 
-	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
 
-	if (evt->event_handler)
-		evt->event_handler(evt);
+	if (timer->cevt.event_handler) {
+		csd = &per_cpu(ingenic_cevt_csd, timer->cpu);
+		csd->info = (void *) &timer->cevt;
+		csd->func = ingenic_per_cpu_event_handler;
+		smp_call_function_single_async(timer->cpu, csd);
+	}
 
 	return IRQ_HANDLED;
 }
 
-static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
+static struct clk *ingenic_tcu_get_clock(struct device_node *np, int id)
 {
 	struct of_phandle_args args;
 
@@ -105,64 +138,66 @@
 	return of_clk_get_from_provider(&args);
 }
 
-static int __init ingenic_tcu_timer_init(struct device_node *np,
-					 struct ingenic_tcu *tcu)
+static int ingenic_tcu_setup_cevt(unsigned int cpu)
 {
-	unsigned int timer_virq, channel = tcu->timer_channel;
+	struct ingenic_tcu *tcu = ingenic_tcu;
+	struct ingenic_tcu_timer *timer = &tcu->timers[cpu];
+	unsigned int timer_virq;
 	struct irq_domain *domain;
 	unsigned long rate;
 	int err;
 
-	tcu->timer_clk = ingenic_tcu_get_clock(np, channel);
-	if (IS_ERR(tcu->timer_clk))
-		return PTR_ERR(tcu->timer_clk);
+	timer->clk = ingenic_tcu_get_clock(tcu->np, timer->channel);
+	if (IS_ERR(timer->clk))
+		return PTR_ERR(timer->clk);
 
-	err = clk_prepare_enable(tcu->timer_clk);
+	err = clk_prepare_enable(timer->clk);
 	if (err)
 		goto err_clk_put;
 
-	rate = clk_get_rate(tcu->timer_clk);
+	rate = clk_get_rate(timer->clk);
 	if (!rate) {
 		err = -EINVAL;
 		goto err_clk_disable;
 	}
 
-	domain = irq_find_host(np);
+	domain = irq_find_host(tcu->np);
 	if (!domain) {
 		err = -ENODEV;
 		goto err_clk_disable;
 	}
 
-	timer_virq = irq_create_mapping(domain, channel);
+	timer_virq = irq_create_mapping(domain, timer->channel);
 	if (!timer_virq) {
 		err = -EINVAL;
 		goto err_clk_disable;
 	}
 
-	snprintf(tcu->name, sizeof(tcu->name), "TCU");
+	snprintf(timer->name, sizeof(timer->name), "TCU%u", timer->channel);
 
 	err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
-			  tcu->name, &tcu->cevt);
+			  timer->name, timer);
 	if (err)
 		goto err_irq_dispose_mapping;
 
-	tcu->cevt.cpumask = cpumask_of(smp_processor_id());
-	tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
-	tcu->cevt.name = tcu->name;
-	tcu->cevt.rating = 200;
-	tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
-	tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+	timer->cpu = smp_processor_id();
+	timer->cevt.cpumask = cpumask_of(smp_processor_id());
+	timer->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	timer->cevt.name = timer->name;
+	timer->cevt.rating = 200;
+	timer->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	timer->cevt.set_next_event = ingenic_tcu_cevt_set_next;
 
-	clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff);
+	clockevents_config_and_register(&timer->cevt, rate, 10, 0xffff);
 
 	return 0;
 
 err_irq_dispose_mapping:
 	irq_dispose_mapping(timer_virq);
 err_clk_disable:
-	clk_disable_unprepare(tcu->timer_clk);
+	clk_disable_unprepare(timer->clk);
 err_clk_put:
-	clk_put(tcu->timer_clk);
+	clk_put(timer->clk);
 	return err;
 }
 
@@ -230,6 +265,7 @@
 	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
 	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
 	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,x1000-tcu", .data = &jz4740_soc_info, },
 	{ /* sentinel */ }
 };
 
@@ -237,10 +273,12 @@
 {
 	const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
 	const struct ingenic_soc_info *soc_info = id->data;
+	struct ingenic_tcu_timer *timer;
 	struct ingenic_tcu *tcu;
 	struct regmap *map;
+	unsigned int cpu;
+	int ret, last_bit = -1;
 	long rate;
-	int ret;
 
 	of_node_clear_flag(np, OF_POPULATED);
 
@@ -248,17 +286,23 @@
 	if (IS_ERR(map))
 		return PTR_ERR(map);
 
-	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	tcu = kzalloc(struct_size(tcu, timers, num_possible_cpus()),
+		      GFP_KERNEL);
 	if (!tcu)
 		return -ENOMEM;
 
-	/* Enable all TCU channels for PWM use by default except channels 0/1 */
-	tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2);
+	/*
+	 * Enable all TCU channels for PWM use by default except channels 0/1,
+	 * and channel 2 if target CPU is JZ4780/X2000 and SMP is selected.
+	 */
+	tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1,
+					 num_possible_cpus() + 1);
 	of_property_read_u32(np, "ingenic,pwm-channels-mask",
 			     (u32 *)&tcu->pwm_channels_mask);
 
-	/* Verify that we have at least two free channels */
-	if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) {
+	/* Verify that we have at least num_possible_cpus() + 1 free channels */
+	if (hweight8(tcu->pwm_channels_mask) >
+			soc_info->num_channels - num_possible_cpus() + 1) {
 		pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
 			tcu->pwm_channels_mask);
 		ret = -EINVAL;
@@ -266,13 +310,22 @@
 	}
 
 	tcu->map = map;
+	tcu->np = np;
 	ingenic_tcu = tcu;
 
-	tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask,
-						 soc_info->num_channels);
+	for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+		timer = &tcu->timers[cpu];
+
+		timer->cpu = cpu;
+		timer->channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+						  soc_info->num_channels,
+						  last_bit + 1);
+		last_bit = timer->channel;
+	}
+
 	tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
 					     soc_info->num_channels,
-					     tcu->timer_channel + 1);
+					     last_bit + 1);
 
 	ret = ingenic_tcu_clocksource_init(np, tcu);
 	if (ret) {
@@ -280,9 +333,13 @@
 		goto err_free_ingenic_tcu;
 	}
 
-	ret = ingenic_tcu_timer_init(np, tcu);
-	if (ret)
+	/* Setup clock events on each CPU core */
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "Ingenic XBurst: online",
+				ingenic_tcu_setup_cevt, NULL);
+	if (ret < 0) {
+		pr_crit("%s: Unable to start CPU timers: %d\n", __func__, ret);
 		goto err_tcu_clocksource_cleanup;
+	}
 
 	/* Register the sched_clock at the end as there's no way to undo it */
 	rate = clk_get_rate(tcu->cs_clk);
@@ -302,7 +359,7 @@
 TIMER_OF_DECLARE(jz4740_tcu_intc,  "ingenic,jz4740-tcu",  ingenic_tcu_init);
 TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
 TIMER_OF_DECLARE(jz4770_tcu_intc,  "ingenic,jz4770-tcu",  ingenic_tcu_init);
-
+TIMER_OF_DECLARE(x1000_tcu_intc,  "ingenic,x1000-tcu",  ingenic_tcu_init);
 
 static int __init ingenic_tcu_probe(struct platform_device *pdev)
 {
@@ -314,28 +371,38 @@
 static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+	unsigned int cpu;
 
 	clk_disable(tcu->cs_clk);
-	clk_disable(tcu->timer_clk);
+
+	for (cpu = 0; cpu < num_online_cpus(); cpu++)
+		clk_disable(tcu->timers[cpu].clk);
+
 	return 0;
 }
 
 static int __maybe_unused ingenic_tcu_resume(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+	unsigned int cpu;
 	int ret;
 
-	ret = clk_enable(tcu->timer_clk);
-	if (ret)
-		return ret;
-
-	ret = clk_enable(tcu->cs_clk);
-	if (ret) {
-		clk_disable(tcu->timer_clk);
-		return ret;
+	for (cpu = 0; cpu < num_online_cpus(); cpu++) {
+		ret = clk_enable(tcu->timers[cpu].clk);
+		if (ret)
+			goto err_timer_clk_disable;
 	}
 
+	ret = clk_enable(tcu->cs_clk);
+	if (ret)
+		goto err_timer_clk_disable;
+
 	return 0;
+
+err_timer_clk_disable:
+	for (; cpu > 0; cpu--)
+		clk_disable(tcu->timers[cpu - 1].clk);
+	return ret;
 }
 
 static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 37671a5..be4175f 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -16,6 +16,7 @@
 #include <linux/notifier.h>
 #include <linux/of_irq.h>
 #include <linux/percpu.h>
+#include <linux/sched_clock.h>
 #include <linux/smp.h>
 #include <linux/time.h>
 #include <asm/mips-cps.h>
@@ -23,14 +24,14 @@
 static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
 static int gic_timer_irq;
 static unsigned int gic_frequency;
+static bool __read_mostly gic_clock_unstable;
 
-static u64 notrace gic_read_count(void)
+static void gic_clocksource_unstable(char *reason);
+
+static u64 notrace gic_read_count_2x32(void)
 {
 	unsigned int hi, hi2, lo;
 
-	if (mips_cm_is64)
-		return read_gic_counter();
-
 	do {
 		hi = read_gic_counter_32h();
 		lo = read_gic_counter_32l();
@@ -40,6 +41,19 @@
 	return (((u64) hi) << 32) + lo;
 }
 
+static u64 notrace gic_read_count_64(void)
+{
+	return read_gic_counter();
+}
+
+static u64 notrace gic_read_count(void)
+{
+	if (mips_cm_is64)
+		return gic_read_count_64();
+
+	return gic_read_count_2x32();
+}
+
 static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
 {
 	int cpu = cpumask_first(evt->cpumask);
@@ -114,8 +128,10 @@
 {
 	struct clk_notifier_data *cnd = data;
 
-	if (action == POST_RATE_CHANGE)
+	if (action == POST_RATE_CHANGE) {
+		gic_clocksource_unstable("ref clock rate change");
 		on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1);
+	}
 
 	return NOTIFY_OK;
 }
@@ -155,12 +171,24 @@
 }
 
 static struct clocksource gic_clocksource = {
-	.name		= "GIC",
-	.read		= gic_hpt_read,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.archdata	= { .vdso_clock_mode = VDSO_CLOCK_GIC },
+	.name			= "GIC",
+	.read			= gic_hpt_read,
+	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
+	.vdso_clock_mode	= VDSO_CLOCKMODE_GIC,
 };
 
+static void gic_clocksource_unstable(char *reason)
+{
+	if (gic_clock_unstable)
+		return;
+
+	gic_clock_unstable = true;
+
+	pr_info("GIC timer is unstable due to %s\n", reason);
+
+	clocksource_mark_unstable(&gic_clocksource);
+}
+
 static int __init __gic_clocksource_init(void)
 {
 	unsigned int count_width;
@@ -228,6 +256,18 @@
 	/* And finally start the counter */
 	clear_gic_config(GIC_CONFIG_COUNTSTOP);
 
+	/*
+	 * It's safe to use the MIPS GIC timer as a sched clock source only if
+	 * its ticks are stable, which is true on either the platforms with
+	 * stable CPU frequency or on the platforms with CM3 and CPU frequency
+	 * change performed by the CPC core clocks divider.
+	 */
+	if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) {
+		sched_clock_register(mips_cm_is64 ?
+				     gic_read_count_64 : gic_read_count_2x32,
+				     64, gic_frequency);
+	}
+
 	return 0;
 }
 TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
diff --git a/drivers/clocksource/mps2-timer.c b/drivers/clocksource/mps2-timer.c
index 2e64d98..efe8cad 100644
--- a/drivers/clocksource/mps2-timer.c
+++ b/drivers/clocksource/mps2-timer.c
@@ -149,9 +149,9 @@
 	ce->clkevt.rating = 200;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ce->clkevt.cpumask = cpu_possible_mask;
-	ce->clkevt.set_state_shutdown	= mps2_timer_shutdown,
-	ce->clkevt.set_state_periodic	= mps2_timer_set_periodic,
-	ce->clkevt.set_state_oneshot	= mps2_timer_shutdown,
+	ce->clkevt.set_state_shutdown	= mps2_timer_shutdown;
+	ce->clkevt.set_state_periodic	= mps2_timer_set_periodic;
+	ce->clkevt.set_state_oneshot	= mps2_timer_shutdown;
 	ce->clkevt.set_next_event	= mps2_timer_set_next_event;
 
 	/* Ensure timer is disabled */
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
index dae8c0c..e52e12d 100644
--- a/drivers/clocksource/mxs_timer.c
+++ b/drivers/clocksource/mxs_timer.c
@@ -117,13 +117,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mxs_timer_irq = {
-	.name		= "MXS Timer Tick",
-	.dev_id		= &mxs_clockevent_device,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxs_timer_interrupt,
-};
-
 static void mxs_irq_clear(char *state)
 {
 	/* Disable interrupt in timer module */
@@ -274,6 +267,7 @@
 	if (irq <= 0)
 		return -EINVAL;
 
-	return setup_irq(irq, &mxs_timer_irq);
+	return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			   "MXS Timer Tick", &mxs_clockevent_device);
 }
 TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 3f7fa8c..1cf3304 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -181,18 +181,12 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction nmdk_timer_irq = {
-	.name		= "Nomadik Timer Tick",
-	.flags		= IRQF_TIMER,
-	.handler	= nmdk_timer_interrupt,
-	.dev_id		= &nmdk_clkevt,
-};
-
 static int __init nmdk_timer_init(void __iomem *base, int irq,
 				   struct clk *pclk, struct clk *clk)
 {
 	unsigned long rate;
 	int ret;
+	int min_ticks;
 
 	mtu_base = base;
 
@@ -201,7 +195,8 @@
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
-	 * for ux500.
+	 * for ux500, and in one specific Ux500 case 32768 Hz.
+	 *
 	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
 	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
 	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
@@ -232,10 +227,17 @@
 	sched_clock_register(nomadik_read_sched_clock, 32, rate);
 
 	/* Timer 1 is used for events, register irq and clockevents */
-	setup_irq(irq, &nmdk_timer_irq);
+	if (request_irq(irq, nmdk_timer_interrupt, IRQF_TIMER,
+			"Nomadik Timer Tick", &nmdk_clkevt))
+		pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	nmdk_clkevt.irq = irq;
-	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
+	if (rate < 100000)
+		min_ticks = 5;
+	else
+		min_ticks = 2;
+	clockevents_config_and_register(&nmdk_clkevt, rate, min_ticks,
+					0xffffffffU);
 
 	mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
 	mtu_delay_timer.freq = rate;
diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 37c39b9..3d06ba6 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -6,14 +6,14 @@
  * Copyright (C) 2017 Chris Brandt
  */
 
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/sched_clock.h>
 #include <linux/slab.h>
 
+#include "timer-of.h"
+
 /*
  * The OSTM contains independent channels.
  * The first OSTM channel probed will be set up as a free running
@@ -24,12 +24,6 @@
  * driven clock event.
  */
 
-struct ostm_device {
-	void __iomem *base;
-	unsigned long ticks_per_jiffy;
-	struct clock_event_device ced;
-};
-
 static void __iomem *system_clock;	/* For sched_clock() */
 
 /* OSTM REGISTERS */
@@ -47,41 +41,32 @@
 #define	CTL_ONESHOT		0x02
 #define	CTL_FREERUN		0x02
 
-static struct ostm_device *ced_to_ostm(struct clock_event_device *ced)
+static void ostm_timer_stop(struct timer_of *to)
 {
-	return container_of(ced, struct ostm_device, ced);
-}
-
-static void ostm_timer_stop(struct ostm_device *ostm)
-{
-	if (readb(ostm->base + OSTM_TE) & TE) {
-		writeb(TT, ostm->base + OSTM_TT);
+	if (readb(timer_of_base(to) + OSTM_TE) & TE) {
+		writeb(TT, timer_of_base(to) + OSTM_TT);
 
 		/*
 		 * Read back the register simply to confirm the write operation
 		 * has completed since I/O writes can sometimes get queued by
 		 * the bus architecture.
 		 */
-		while (readb(ostm->base + OSTM_TE) & TE)
+		while (readb(timer_of_base(to) + OSTM_TE) & TE)
 			;
 	}
 }
 
-static int __init ostm_init_clksrc(struct ostm_device *ostm, unsigned long rate)
+static int __init ostm_init_clksrc(struct timer_of *to)
 {
-	/*
-	 * irq not used (clock sources don't use interrupts)
-	 */
+	ostm_timer_stop(to);
 
-	ostm_timer_stop(ostm);
+	writel(0, timer_of_base(to) + OSTM_CMP);
+	writeb(CTL_FREERUN, timer_of_base(to) + OSTM_CTL);
+	writeb(TS, timer_of_base(to) + OSTM_TS);
 
-	writel(0, ostm->base + OSTM_CMP);
-	writeb(CTL_FREERUN, ostm->base + OSTM_CTL);
-	writeb(TS, ostm->base + OSTM_TS);
-
-	return clocksource_mmio_init(ostm->base + OSTM_CNT,
-			"ostm", rate,
-			300, 32, clocksource_mmio_readl_up);
+	return clocksource_mmio_init(timer_of_base(to) + OSTM_CNT,
+				     to->np->full_name, timer_of_rate(to), 300,
+				     32, clocksource_mmio_readl_up);
 }
 
 static u64 notrace ostm_read_sched_clock(void)
@@ -89,87 +74,75 @@
 	return readl(system_clock);
 }
 
-static void __init ostm_init_sched_clock(struct ostm_device *ostm,
-			unsigned long rate)
+static void __init ostm_init_sched_clock(struct timer_of *to)
 {
-	system_clock = ostm->base + OSTM_CNT;
-	sched_clock_register(ostm_read_sched_clock, 32, rate);
+	system_clock = timer_of_base(to) + OSTM_CNT;
+	sched_clock_register(ostm_read_sched_clock, 32, timer_of_rate(to));
 }
 
 static int ostm_clock_event_next(unsigned long delta,
-				     struct clock_event_device *ced)
+				 struct clock_event_device *ced)
 {
-	struct ostm_device *ostm = ced_to_ostm(ced);
+	struct timer_of *to = to_timer_of(ced);
 
-	ostm_timer_stop(ostm);
+	ostm_timer_stop(to);
 
-	writel(delta, ostm->base + OSTM_CMP);
-	writeb(CTL_ONESHOT, ostm->base + OSTM_CTL);
-	writeb(TS, ostm->base + OSTM_TS);
+	writel(delta, timer_of_base(to) + OSTM_CMP);
+	writeb(CTL_ONESHOT, timer_of_base(to) + OSTM_CTL);
+	writeb(TS, timer_of_base(to) + OSTM_TS);
 
 	return 0;
 }
 
 static int ostm_shutdown(struct clock_event_device *ced)
 {
-	struct ostm_device *ostm = ced_to_ostm(ced);
+	struct timer_of *to = to_timer_of(ced);
 
-	ostm_timer_stop(ostm);
+	ostm_timer_stop(to);
 
 	return 0;
 }
 static int ostm_set_periodic(struct clock_event_device *ced)
 {
-	struct ostm_device *ostm = ced_to_ostm(ced);
+	struct timer_of *to = to_timer_of(ced);
 
 	if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
-		ostm_timer_stop(ostm);
+		ostm_timer_stop(to);
 
-	writel(ostm->ticks_per_jiffy - 1, ostm->base + OSTM_CMP);
-	writeb(CTL_PERIODIC, ostm->base + OSTM_CTL);
-	writeb(TS, ostm->base + OSTM_TS);
+	writel(timer_of_period(to) - 1, timer_of_base(to) + OSTM_CMP);
+	writeb(CTL_PERIODIC, timer_of_base(to) + OSTM_CTL);
+	writeb(TS, timer_of_base(to) + OSTM_TS);
 
 	return 0;
 }
 
 static int ostm_set_oneshot(struct clock_event_device *ced)
 {
-	struct ostm_device *ostm = ced_to_ostm(ced);
+	struct timer_of *to = to_timer_of(ced);
 
-	ostm_timer_stop(ostm);
+	ostm_timer_stop(to);
 
 	return 0;
 }
 
 static irqreturn_t ostm_timer_interrupt(int irq, void *dev_id)
 {
-	struct ostm_device *ostm = dev_id;
+	struct clock_event_device *ced = dev_id;
 
-	if (clockevent_state_oneshot(&ostm->ced))
-		ostm_timer_stop(ostm);
+	if (clockevent_state_oneshot(ced))
+		ostm_timer_stop(to_timer_of(ced));
 
 	/* notify clockevent layer */
-	if (ostm->ced.event_handler)
-		ostm->ced.event_handler(&ostm->ced);
+	if (ced->event_handler)
+		ced->event_handler(ced);
 
 	return IRQ_HANDLED;
 }
 
-static int __init ostm_init_clkevt(struct ostm_device *ostm, int irq,
-			unsigned long rate)
+static int __init ostm_init_clkevt(struct timer_of *to)
 {
-	struct clock_event_device *ced = &ostm->ced;
-	int ret = -ENXIO;
+	struct clock_event_device *ced = &to->clkevt;
 
-	ret = request_irq(irq, ostm_timer_interrupt,
-			  IRQF_TIMER | IRQF_IRQPOLL,
-			  "ostm", ostm);
-	if (ret) {
-		pr_err("ostm: failed to request irq\n");
-		return ret;
-	}
-
-	ced->name = "ostm";
 	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
 	ced->set_state_shutdown = ostm_shutdown;
 	ced->set_state_periodic = ostm_set_periodic;
@@ -178,79 +151,61 @@
 	ced->shift = 32;
 	ced->rating = 300;
 	ced->cpumask = cpumask_of(0);
-	clockevents_config_and_register(ced, rate, 0xf, 0xffffffff);
+	clockevents_config_and_register(ced, timer_of_rate(to), 0xf,
+					0xffffffff);
 
 	return 0;
 }
 
 static int __init ostm_init(struct device_node *np)
 {
-	struct ostm_device *ostm;
-	int ret = -EFAULT;
-	struct clk *ostm_clk = NULL;
-	int irq;
-	unsigned long rate;
+	struct timer_of *to;
+	int ret;
 
-	ostm = kzalloc(sizeof(*ostm), GFP_KERNEL);
-	if (!ostm)
+	to = kzalloc(sizeof(*to), GFP_KERNEL);
+	if (!to)
 		return -ENOMEM;
 
-	ostm->base = of_iomap(np, 0);
-	if (!ostm->base) {
-		pr_err("ostm: failed to remap I/O memory\n");
-		goto err;
+	to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+	if (system_clock) {
+		/*
+		 * clock sources don't use interrupts, clock events do
+		 */
+		to->flags |= TIMER_OF_IRQ;
+		to->of_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
+		to->of_irq.handler = ostm_timer_interrupt;
 	}
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq < 0) {
-		pr_err("ostm: Failed to get irq\n");
-		goto err;
-	}
-
-	ostm_clk = of_clk_get(np, 0);
-	if (IS_ERR(ostm_clk)) {
-		pr_err("ostm: Failed to get clock\n");
-		ostm_clk = NULL;
-		goto err;
-	}
-
-	ret = clk_prepare_enable(ostm_clk);
-	if (ret) {
-		pr_err("ostm: Failed to enable clock\n");
-		goto err;
-	}
-
-	rate = clk_get_rate(ostm_clk);
-	ostm->ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+	ret = timer_of_init(np, to);
+	if (ret)
+		goto err_free;
 
 	/*
 	 * First probed device will be used as system clocksource. Any
 	 * additional devices will be used as clock events.
 	 */
 	if (!system_clock) {
-		ret = ostm_init_clksrc(ostm, rate);
+		ret = ostm_init_clksrc(to);
+		if (ret)
+			goto err_cleanup;
 
-		if (!ret) {
-			ostm_init_sched_clock(ostm, rate);
-			pr_info("ostm: used for clocksource\n");
-		}
-
+		ostm_init_sched_clock(to);
+		pr_info("%pOF: used for clocksource\n", np);
 	} else {
-		ret = ostm_init_clkevt(ostm, irq, rate);
+		ret = ostm_init_clkevt(to);
+		if (ret)
+			goto err_cleanup;
 
-		if (!ret)
-			pr_info("ostm: used for clock events\n");
-	}
-
-err:
-	if (ret) {
-		clk_disable_unprepare(ostm_clk);
-		iounmap(ostm->base);
-		kfree(ostm);
-		return ret;
+		pr_info("%pOF: used for clock events\n", np);
 	}
 
 	return 0;
+
+err_cleanup:
+	timer_of_cleanup(to);
+err_free:
+	kfree(to);
+	return ret;
 }
 
 TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index 895f53e..f760229 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -256,13 +256,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction samsung_clock_event_irq = {
-	.name		= "samsung_time_irq",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= samsung_clock_event_isr,
-	.dev_id		= &time_event_device,
-};
-
 static void __init samsung_clockevent_init(void)
 {
 	unsigned long pclk;
@@ -282,7 +275,10 @@
 						clock_rate, 1, pwm.tcnt_max);
 
 	irq_number = pwm.irq[pwm.event_id];
-	setup_irq(irq_number, &samsung_clock_event_irq);
+	if (request_irq(irq_number, samsung_clock_event_isr,
+			IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
+			&time_event_device))
+		pr_err("%s: request_irq() failed\n", "samsung_time_irq");
 
 	if (pwm.variant.has_tint_cstat) {
 		u32 mask = (1 << pwm.event_id);
@@ -430,8 +426,7 @@
 
 	of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
 		if (val >= SAMSUNG_PWM_NUM) {
-			pr_warning("%s: invalid channel index in samsung,pwm-outputs property\n",
-								__func__);
+			pr_warn("%s: invalid channel index in samsung,pwm-outputs property\n", __func__);
 			continue;
 		}
 		pwm.variant.output_mask |= 1 << val;
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index a057021..2acfcc9 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -25,6 +25,10 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
 struct sh_cmt_device;
 
 /*
@@ -345,7 +349,7 @@
 
 	/*
 	 * According to the sh73a0 user's manual, as CMCNT can be operated
-	 * only by the RCLK (Pseudo 32 KHz), there's one restriction on
+	 * only by the RCLK (Pseudo 32 kHz), there's one restriction on
 	 * modifying CMCNT register; two RCLK cycles are necessary before
 	 * this register is either read or any modification of the value
 	 * it holds is reflected in the LSI's actual operation.
@@ -907,7 +911,7 @@
 		return -ENXIO;
 	}
 
-	cmt->mapbase = ioremap_nocache(mem->start, resource_size(mem));
+	cmt->mapbase = ioremap(mem->start, resource_size(mem));
 	if (cmt->mapbase == NULL) {
 		dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n");
 		return -ENXIO;
@@ -1058,7 +1062,7 @@
 	struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
 	int ret;
 
-	if (!is_early_platform_device(pdev)) {
+	if (!is_sh_early_platform_device(pdev)) {
 		pm_runtime_set_active(&pdev->dev);
 		pm_runtime_enable(&pdev->dev);
 	}
@@ -1078,7 +1082,7 @@
 		pm_runtime_idle(&pdev->dev);
 		return ret;
 	}
-	if (is_early_platform_device(pdev))
+	if (is_sh_early_platform_device(pdev))
 		return 0;
 
  out:
@@ -1115,7 +1119,10 @@
 	platform_driver_unregister(&sh_cmt_device_driver);
 }
 
-early_platform_init("earlytimer", &sh_cmt_device_driver);
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
+#endif
+
 subsys_initcall(sh_cmt_init);
 module_exit(sh_cmt_exit);
 
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 62812f8..bfccb31 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -23,6 +23,10 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
 struct sh_mtu2_device;
 
 struct sh_mtu2_channel {
@@ -373,7 +377,7 @@
 		return -ENXIO;
 	}
 
-	mtu->mapbase = ioremap_nocache(res->start, resource_size(res));
+	mtu->mapbase = ioremap(res->start, resource_size(res));
 	if (mtu->mapbase == NULL)
 		return -ENXIO;
 
@@ -448,7 +452,7 @@
 	struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
 	int ret;
 
-	if (!is_early_platform_device(pdev)) {
+	if (!is_sh_early_platform_device(pdev)) {
 		pm_runtime_set_active(&pdev->dev);
 		pm_runtime_enable(&pdev->dev);
 	}
@@ -468,7 +472,7 @@
 		pm_runtime_idle(&pdev->dev);
 		return ret;
 	}
-	if (is_early_platform_device(pdev))
+	if (is_sh_early_platform_device(pdev))
 		return 0;
 
  out:
@@ -517,7 +521,10 @@
 	platform_driver_unregister(&sh_mtu2_device_driver);
 }
 
-early_platform_init("earlytimer", &sh_mtu2_device_driver);
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_mtu2_device_driver);
+#endif
+
 subsys_initcall(sh_mtu2_init);
 module_exit(sh_mtu2_exit);
 
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8c4f375..d41df9b 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -24,6 +24,10 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
 enum sh_tmu_model {
 	SH_TMU,
 	SH_TMU_SH3,
@@ -482,7 +486,7 @@
 		return -ENXIO;
 	}
 
-	tmu->mapbase = ioremap_nocache(res->start, resource_size(res));
+	tmu->mapbase = ioremap(res->start, resource_size(res));
 	if (tmu->mapbase == NULL)
 		return -ENXIO;
 
@@ -595,7 +599,7 @@
 	struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
 	int ret;
 
-	if (!is_early_platform_device(pdev)) {
+	if (!is_sh_early_platform_device(pdev)) {
 		pm_runtime_set_active(&pdev->dev);
 		pm_runtime_enable(&pdev->dev);
 	}
@@ -615,7 +619,8 @@
 		pm_runtime_idle(&pdev->dev);
 		return ret;
 	}
-	if (is_early_platform_device(pdev))
+
+	if (is_sh_early_platform_device(pdev))
 		return 0;
 
  out:
@@ -665,7 +670,10 @@
 	platform_driver_unregister(&sh_tmu_device_driver);
 }
 
-early_platform_init("earlytimer", &sh_tmu_device_driver);
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
+#endif
+
 subsys_initcall(sh_tmu_init);
 module_exit(sh_tmu_exit);
 
diff --git a/drivers/clocksource/timer-armada-370-xp.c b/drivers/clocksource/timer-armada-370-xp.c
index edf1a46..e3acc3c 100644
--- a/drivers/clocksource/timer-armada-370-xp.c
+++ b/drivers/clocksource/timer-armada-370-xp.c
@@ -181,12 +181,12 @@
 		clr = TIMER0_25MHZ;
 	local_timer_ctrl_clrset(clr, set);
 
-	evt->name		= "armada_370_xp_per_cpu_tick",
+	evt->name		= "armada_370_xp_per_cpu_tick";
 	evt->features		= CLOCK_EVT_FEAT_ONESHOT |
 				  CLOCK_EVT_FEAT_PERIODIC;
-	evt->shift		= 32,
-	evt->rating		= 300,
-	evt->set_next_event	= armada_370_xp_clkevt_next_event,
+	evt->shift		= 32;
+	evt->rating		= 300;
+	evt->set_next_event	= armada_370_xp_clkevt_next_event;
 	evt->set_state_shutdown	= armada_370_xp_clkevt_shutdown;
 	evt->set_state_periodic	= armada_370_xp_clkevt_set_periodic;
 	evt->set_state_oneshot	= armada_370_xp_clkevt_shutdown;
diff --git a/drivers/clocksource/timer-atlas7.c b/drivers/clocksource/timer-atlas7.c
index 93c3ac6..c21c91c 100644
--- a/drivers/clocksource/timer-atlas7.c
+++ b/drivers/clocksource/timer-atlas7.c
@@ -159,29 +159,23 @@
 	.resume = sirfsoc_clocksource_resume,
 };
 
-static struct irqaction sirfsoc_timer_irq = {
-	.name = "sirfsoc_timer0",
-	.flags = IRQF_TIMER | IRQF_NOBALANCING,
-	.handler = sirfsoc_timer_interrupt,
-};
-
-static struct irqaction sirfsoc_timer1_irq = {
-	.name = "sirfsoc_timer1",
-	.flags = IRQF_TIMER | IRQF_NOBALANCING,
-	.handler = sirfsoc_timer_interrupt,
-};
+static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq;
 
 static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
 {
 	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
-	struct irqaction *action;
+	unsigned int irq;
+	const char *name;
 
-	if (cpu == 0)
-		action = &sirfsoc_timer_irq;
-	else
-		action = &sirfsoc_timer1_irq;
+	if (cpu == 0) {
+		irq = sirfsoc_timer_irq;
+		name = "sirfsoc_timer0";
+	} else {
+		irq = sirfsoc_timer1_irq;
+		name = "sirfsoc_timer1";
+	}
 
-	ce->irq = action->irq;
+	ce->irq = irq;
 	ce->name = "local_timer";
 	ce->features = CLOCK_EVT_FEAT_ONESHOT;
 	ce->rating = 200;
@@ -196,9 +190,9 @@
 	ce->min_delta_ticks = 2;
 	ce->cpumask = cpumask_of(cpu);
 
-	action->dev_id = ce;
-	BUG_ON(setup_irq(ce->irq, action));
-	irq_force_affinity(action->irq, cpumask_of(cpu));
+	BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt,
+			   IRQF_TIMER | IRQF_NOBALANCING, name, ce));
+	irq_force_affinity(ce->irq, cpumask_of(cpu));
 
 	clockevents_register_device(ce);
 	return 0;
@@ -206,12 +200,14 @@
 
 static int sirfsoc_local_timer_dying_cpu(unsigned int cpu)
 {
+	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
+
 	sirfsoc_timer_count_disable(1);
 
 	if (cpu == 0)
-		remove_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+		free_irq(sirfsoc_timer_irq, ce);
 	else
-		remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
+		free_irq(sirfsoc_timer1_irq, ce);
 	return 0;
 }
 
@@ -268,14 +264,14 @@
 		return -ENXIO;
 	}
 
-	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
-	if (!sirfsoc_timer_irq.irq) {
+	sirfsoc_timer_irq = irq_of_parse_and_map(np, 0);
+	if (!sirfsoc_timer_irq) {
 		pr_err("No irq passed for timer0 via DT\n");
 		return -EINVAL;
 	}
 
-	sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
-	if (!sirfsoc_timer1_irq.irq) {
+	sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1);
+	if (!sirfsoc_timer1_irq) {
 		pr_err("No irq passed for timer1 via DT\n");
 		return -EINVAL;
 	}
diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index ab0aabf..73e8aee 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -139,7 +139,6 @@
 clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
 	u32		alm;
-	int		status = 0;
 	unsigned int	val;
 
 	BUG_ON(delta < 2);
@@ -163,7 +162,7 @@
 	alm += delta;
 	regmap_write(regmap_st, AT91_ST_RTAR, alm);
 
-	return status;
+	return 0;
 }
 
 static struct clock_event_device clkevt = {
diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index 7427b07..787dbeb 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -27,9 +27,10 @@
  *   - Some chips support 32 bit counter. A single channel is used for
  *     this 32 bit free-running counter. the second channel is not used.
  *
- *   - The third channel may be used to provide a 16-bit clockevent
- *     source, used in either periodic or oneshot mode.  This runs
- *     at 32 KiHZ, and can handle delays of up to two seconds.
+ *   - The third channel may be used to provide a clockevent source, used in
+ *   either periodic or oneshot mode. For 16-bit counter its runs at 32 KiHZ,
+ *   and can handle delays of up to two seconds. For 32-bit counters, it runs at
+ *   the same rate as the clocksource
  *
  * REVISIT behavior during system suspend states... we should disable
  * all clocks and save the power.  Easily done for clockevent devices,
@@ -47,6 +48,8 @@
 } tcb_cache[3];
 static u32 bmr_cache;
 
+static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 };
+
 static u64 tc_get_cycles(struct clocksource *cs)
 {
 	unsigned long	flags;
@@ -143,6 +146,7 @@
 struct tc_clkevt_device {
 	struct clock_event_device	clkevt;
 	struct clk			*clk;
+	u32				rate;
 	void __iomem			*regs;
 };
 
@@ -151,13 +155,6 @@
 	return container_of(clkevt, struct tc_clkevt_device, clkevt);
 }
 
-/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
- * because using one of the divided clocks would usually mean the
- * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
- *
- * A divided clock could be good for high resolution timers, since
- * 30.5 usec resolution can seem "low".
- */
 static u32 timer_clock;
 
 static int tc_shutdown(struct clock_event_device *d)
@@ -183,7 +180,7 @@
 
 	clk_enable(tcd->clk);
 
-	/* slow clock, count up to RC, then irq and stop */
+	/* count up to RC, then irq and stop */
 	writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE |
 		     ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR));
 	writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
@@ -205,10 +202,10 @@
 	 */
 	clk_enable(tcd->clk);
 
-	/* slow clock, count up to RC, then irq and restart */
+	/* count up to RC, then irq and restart */
 	writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
 		     regs + ATMEL_TC_REG(2, CMR));
-	writel((32768 + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+	writel((tcd->rate + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
 
 	/* Enable clock and interrupts on RC compare */
 	writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
@@ -256,47 +253,55 @@
 	return IRQ_NONE;
 }
 
-static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
 {
 	int ret;
 	struct clk *t2_clk = tc->clk[2];
 	int irq = tc->irq[2];
-
-	ret = clk_prepare_enable(tc->slow_clk);
-	if (ret)
-		return ret;
+	int bits = tc->tcb_config->counter_width;
 
 	/* try to enable t2 clk to avoid future errors in mode change */
 	ret = clk_prepare_enable(t2_clk);
-	if (ret) {
-		clk_disable_unprepare(tc->slow_clk);
+	if (ret)
 		return ret;
-	}
-
-	clk_disable(t2_clk);
 
 	clkevt.regs = tc->regs;
 	clkevt.clk = t2_clk;
 
-	timer_clock = clk32k_divisor_idx;
+	if (bits == 32) {
+		timer_clock = divisor_idx;
+		clkevt.rate = clk_get_rate(t2_clk) / atmel_tcb_divisors[divisor_idx];
+	} else {
+		ret = clk_prepare_enable(tc->slow_clk);
+		if (ret) {
+			clk_disable_unprepare(t2_clk);
+			return ret;
+		}
+
+		clkevt.rate = clk_get_rate(tc->slow_clk);
+		timer_clock = ATMEL_TC_TIMER_CLOCK5;
+	}
+
+	clk_disable(t2_clk);
 
 	clkevt.clkevt.cpumask = cpumask_of(0);
 
 	ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
 	if (ret) {
 		clk_unprepare(t2_clk);
-		clk_disable_unprepare(tc->slow_clk);
+		if (bits != 32)
+			clk_disable_unprepare(tc->slow_clk);
 		return ret;
 	}
 
-	clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
+	clockevents_config_and_register(&clkevt.clkevt, clkevt.rate, 1, BIT(bits) - 1);
 
 	return ret;
 }
 
 #else /* !CONFIG_GENERIC_CLOCKEVENTS */
 
-static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
 {
 	/* NOTHING */
 	return 0;
@@ -346,11 +351,23 @@
 	writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
 }
 
-static const u8 atmel_tcb_divisors[5] = { 2, 8, 32, 128, 0, };
+static struct atmel_tcb_config tcb_rm9200_config = {
+	.counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+	.counter_width = 32,
+};
+
+static struct atmel_tcb_config tcb_sama5d2_config = {
+	.counter_width = 32,
+	.has_gclk = 1,
+};
 
 static const struct of_device_id atmel_tcb_of_match[] = {
-	{ .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
-	{ .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
+	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
 	{ /* sentinel */ }
 };
 
@@ -362,7 +379,6 @@
 	u64 (*tc_sched_clock)(void);
 	u32 rate, divided_rate = 0;
 	int best_divisor_idx = -1;
-	int clk32k_divisor_idx = -1;
 	int bits;
 	int i;
 	int ret;
@@ -399,7 +415,11 @@
 	}
 
 	match = of_match_node(atmel_tcb_of_match, node->parent);
-	bits = (uintptr_t)match->data;
+	if (!match)
+		return -ENODEV;
+
+	tc.tcb_config = match->data;
+	bits = tc.tcb_config->counter_width;
 
 	for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
 		writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
@@ -412,22 +432,17 @@
 
 	/* How fast will we be counting?  Pick something over 5 MHz.  */
 	rate = (u32) clk_get_rate(t0_clk);
-	for (i = 0; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+	i = 0;
+	if (tc.tcb_config->has_gclk)
+		i = 1;
+	for (; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
 		unsigned divisor = atmel_tcb_divisors[i];
 		unsigned tmp;
 
-		/* remember 32 KiHz clock for later */
-		if (!divisor) {
-			clk32k_divisor_idx = i;
-			continue;
-		}
-
 		tmp = rate / divisor;
 		pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
-		if (best_divisor_idx > 0) {
-			if (tmp < 5 * 1000 * 1000)
-				continue;
-		}
+		if ((best_divisor_idx >= 0) && (tmp < 5 * 1000 * 1000))
+			break;
 		divided_rate = tmp;
 		best_divisor_idx = i;
 	}
@@ -467,7 +482,7 @@
 		goto err_disable_t1;
 
 	/* channel 2:  periodic and oneshot timer support */
-	ret = setup_clkevents(&tc, clk32k_divisor_idx);
+	ret = setup_clkevents(&tc, best_divisor_idx);
 	if (ret)
 		goto err_unregister_clksrc;
 
diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c
index 160bc65..4efd0cf 100644
--- a/drivers/clocksource/timer-cadence-ttc.c
+++ b/drivers/clocksource/timer-cadence-ttc.c
@@ -15,6 +15,8 @@
 #include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/sched_clock.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
 
 /*
  * This driver configures the 2 16/32-bit count-up timers as follows:
@@ -307,7 +309,7 @@
 		/* restore original register value */
 		writel_relaxed(ttccs->scale_clk_ctrl_reg_old,
 			       ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
-		/* fall through */
+		fallthrough;
 	default:
 		return NOTIFY_DONE;
 	}
@@ -390,7 +392,7 @@
 
 		clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE);
 
-		/* fall through */
+		fallthrough;
 	case PRE_RATE_CHANGE:
 	case ABORT_RATE_CHANGE:
 	default:
@@ -464,13 +466,7 @@
 	return err;
 }
 
-/**
- * ttc_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- */
-static int __init ttc_timer_init(struct device_node *timer)
+static int __init ttc_timer_probe(struct platform_device *pdev)
 {
 	unsigned int irq;
 	void __iomem *timer_baseaddr;
@@ -478,6 +474,7 @@
 	static int initialized;
 	int clksel, ret;
 	u32 timer_width = 16;
+	struct device_node *timer = pdev->dev.of_node;
 
 	if (initialized)
 		return 0;
@@ -532,4 +529,17 @@
 	return 0;
 }
 
-TIMER_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
+static const struct of_device_id ttc_timer_of_match[] = {
+	{.compatible = "cdns,ttc"},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, ttc_timer_of_match);
+
+static struct platform_driver ttc_timer_driver = {
+	.driver = {
+		.name	= "cdns_ttc_timer",
+		.of_match_table = ttc_timer_of_match,
+	},
+};
+builtin_platform_driver_probe(ttc_timer_driver, ttc_timer_probe);
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
new file mode 100644
index 0000000..6cfe2ab
--- /dev/null
+++ b/drivers/clocksource/timer-clint.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a
+ * CLINT MMIO timer device.
+ */
+
+#define pr_fmt(fmt) "clint: " fmt
+#include <linux/bitops.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+
+#ifndef CONFIG_RISCV_M_MODE
+#include <asm/clint.h>
+#endif
+
+#define CLINT_IPI_OFF		0
+#define CLINT_TIMER_CMP_OFF	0x4000
+#define CLINT_TIMER_VAL_OFF	0xbff8
+
+/* CLINT manages IPI and Timer for RISC-V M-mode  */
+static u32 __iomem *clint_ipi_base;
+static u64 __iomem *clint_timer_cmp;
+static u64 __iomem *clint_timer_val;
+static unsigned long clint_timer_freq;
+static unsigned int clint_timer_irq;
+
+#ifdef CONFIG_RISCV_M_MODE
+u64 __iomem *clint_time_val;
+EXPORT_SYMBOL(clint_time_val);
+#endif
+
+static void clint_send_ipi(const struct cpumask *target)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, target)
+		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
+}
+
+static void clint_clear_ipi(void)
+{
+	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
+}
+
+static struct riscv_ipi_ops clint_ipi_ops = {
+	.ipi_inject = clint_send_ipi,
+	.ipi_clear = clint_clear_ipi,
+};
+
+#ifdef CONFIG_64BIT
+#define clint_get_cycles()	readq_relaxed(clint_timer_val)
+#else
+#define clint_get_cycles()	readl_relaxed(clint_timer_val)
+#define clint_get_cycles_hi()	readl_relaxed(((u32 *)clint_timer_val) + 1)
+#endif
+
+#ifdef CONFIG_64BIT
+static u64 notrace clint_get_cycles64(void)
+{
+	return clint_get_cycles();
+}
+#else /* CONFIG_64BIT */
+static u64 notrace clint_get_cycles64(void)
+{
+	u32 hi, lo;
+
+	do {
+		hi = clint_get_cycles_hi();
+		lo = clint_get_cycles();
+	} while (hi != clint_get_cycles_hi());
+
+	return ((u64)hi << 32) | lo;
+}
+#endif /* CONFIG_64BIT */
+
+static u64 clint_rdtime(struct clocksource *cs)
+{
+	return clint_get_cycles64();
+}
+
+static struct clocksource clint_clocksource = {
+	.name		= "clint_clocksource",
+	.rating		= 300,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.read		= clint_rdtime,
+};
+
+static int clint_clock_next_event(unsigned long delta,
+				   struct clock_event_device *ce)
+{
+	void __iomem *r = clint_timer_cmp +
+			  cpuid_to_hartid_map(smp_processor_id());
+
+	csr_set(CSR_IE, IE_TIE);
+	writeq_relaxed(clint_get_cycles64() + delta, r);
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = {
+	.name		= "clint_clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 100,
+	.set_next_event	= clint_clock_next_event,
+};
+
+static int clint_timer_starting_cpu(unsigned int cpu)
+{
+	struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu);
+
+	ce->cpumask = cpumask_of(cpu);
+	clockevents_config_and_register(ce, clint_timer_freq, 100, 0x7fffffff);
+
+	enable_percpu_irq(clint_timer_irq,
+			  irq_get_trigger_type(clint_timer_irq));
+	return 0;
+}
+
+static int clint_timer_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(clint_timer_irq);
+	return 0;
+}
+
+static irqreturn_t clint_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event);
+
+	csr_clear(CSR_IE, IE_TIE);
+	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
+}
+
+static int __init clint_timer_init_dt(struct device_node *np)
+{
+	int rc;
+	u32 i, nr_irqs;
+	void __iomem *base;
+	struct of_phandle_args oirq;
+
+	/*
+	 * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or
+	 * RV_IRQ_SOFT. If it's anything else then we ignore the device.
+	 */
+	nr_irqs = of_irq_count(np);
+	for (i = 0; i < nr_irqs; i++) {
+		if (of_irq_parse_one(np, i, &oirq)) {
+			pr_err("%pOFP: failed to parse irq %d.\n", np, i);
+			continue;
+		}
+
+		if ((oirq.args_count != 1) ||
+		    (oirq.args[0] != RV_IRQ_TIMER &&
+		     oirq.args[0] != RV_IRQ_SOFT)) {
+			pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
+			       np, i, oirq.args[0]);
+			return -ENODEV;
+		}
+
+		/* Find parent irq domain and map timer irq */
+		if (!clint_timer_irq &&
+		    oirq.args[0] == RV_IRQ_TIMER &&
+		    irq_find_host(oirq.np))
+			clint_timer_irq = irq_of_parse_and_map(np, i);
+	}
+
+	/* If CLINT timer irq not found then fail */
+	if (!clint_timer_irq) {
+		pr_err("%pOFP: timer irq not found\n", np);
+		return -ENODEV;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("%pOFP: could not map registers\n", np);
+		return -ENODEV;
+	}
+
+	clint_ipi_base = base + CLINT_IPI_OFF;
+	clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
+	clint_timer_val = base + CLINT_TIMER_VAL_OFF;
+	clint_timer_freq = riscv_timebase;
+
+#ifdef CONFIG_RISCV_M_MODE
+	/*
+	 * Yes, that's an odd naming scheme.  time_val is public, but hopefully
+	 * will die in favor of something cleaner.
+	 */
+	clint_time_val = clint_timer_val;
+#endif
+
+	pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq);
+
+	rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq);
+	if (rc) {
+		pr_err("%pOFP: clocksource register failed [%d]\n", np, rc);
+		goto fail_iounmap;
+	}
+
+	sched_clock_register(clint_get_cycles64, 64, clint_timer_freq);
+
+	rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt,
+				 "clint-timer", &clint_clock_event);
+	if (rc) {
+		pr_err("registering percpu irq failed [%d]\n", rc);
+		goto fail_iounmap;
+	}
+
+	rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING,
+				"clockevents/clint/timer:starting",
+				clint_timer_starting_cpu,
+				clint_timer_dying_cpu);
+	if (rc) {
+		pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc);
+		goto fail_free_irq;
+	}
+
+	riscv_set_ipi_ops(&clint_ipi_ops);
+	clint_clear_ipi();
+
+	return 0;
+
+fail_free_irq:
+	free_irq(clint_timer_irq, &clint_clock_event);
+fail_iounmap:
+	iounmap(base);
+	return rc;
+}
+
+TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt);
+TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt);
diff --git a/drivers/clocksource/timer-cs5535.c b/drivers/clocksource/timer-cs5535.c
index 8f6bc53..d47acfe 100644
--- a/drivers/clocksource/timer-cs5535.c
+++ b/drivers/clocksource/timer-cs5535.c
@@ -131,14 +131,9 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mfgptirq  = {
-	.handler = mfgpt_tick,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
-	.name = DRV_NAME,
-};
-
 static int __init cs5535_mfgpt_init(void)
 {
+	unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED;
 	struct cs5535_mfgpt_timer *timer;
 	int ret;
 	uint16_t val;
@@ -158,7 +153,7 @@
 	}
 
 	/* And register it with the kernel */
-	ret = setup_irq(timer_irq, &mfgptirq);
+	ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer);
 	if (ret) {
 		printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
 		goto err_irq;
diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
index e421946..bb4eee3 100644
--- a/drivers/clocksource/timer-davinci.c
+++ b/drivers/clocksource/timer-davinci.c
@@ -18,7 +18,7 @@
 #include <clocksource/timer-davinci.h>
 
 #undef pr_fmt
-#define pr_fmt(fmt) "%s: " fmt "\n", __func__
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #define DAVINCI_TIMER_REG_TIM12			0x10
 #define DAVINCI_TIMER_REG_TIM34			0x14
@@ -250,31 +250,29 @@
 
 	rv = clk_prepare_enable(clk);
 	if (rv) {
-		pr_err("Unable to prepare and enable the timer clock");
+		pr_err("Unable to prepare and enable the timer clock\n");
 		return rv;
 	}
 
 	if (!request_mem_region(timer_cfg->reg.start,
 				resource_size(&timer_cfg->reg),
 				"davinci-timer")) {
-		pr_err("Unable to request memory region");
+		pr_err("Unable to request memory region\n");
 		return -EBUSY;
 	}
 
 	base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
 	if (!base) {
-		pr_err("Unable to map the register range");
+		pr_err("Unable to map the register range\n");
 		return -ENOMEM;
 	}
 
 	davinci_timer_init(base);
 	tick_rate = clk_get_rate(clk);
 
-	clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL);
-	if (!clockevent) {
-		pr_err("Error allocating memory for clockevent data");
+	clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL);
+	if (!clockevent)
 		return -ENOMEM;
-	}
 
 	clockevent->dev.name = "tim12";
 	clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
@@ -298,7 +296,7 @@
 			 davinci_timer_irq_timer, IRQF_TIMER,
 			 "clockevent/tim12", clockevent);
 	if (rv) {
-		pr_err("Unable to request the clockevent interrupt");
+		pr_err("Unable to request the clockevent interrupt\n");
 		return rv;
 	}
 
@@ -325,7 +323,7 @@
 
 	rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
 	if (rv) {
-		pr_err("Unable to register clocksource");
+		pr_err("Unable to register clocksource\n");
 		return rv;
 	}
 
@@ -343,20 +341,20 @@
 
 	rv = of_address_to_resource(np, 0, &timer_cfg.reg);
 	if (rv) {
-		pr_err("Unable to get the register range for timer");
+		pr_err("Unable to get the register range for timer\n");
 		return rv;
 	}
 
 	rv = of_irq_to_resource_table(np, timer_cfg.irq,
 				      DAVINCI_TIMER_NUM_IRQS);
 	if (rv != DAVINCI_TIMER_NUM_IRQS) {
-		pr_err("Unable to get the interrupts for timer");
+		pr_err("Unable to get the interrupts for timer\n");
 		return rv;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Unable to get the timer clock");
+		pr_err("Unable to get the timer clock\n");
 		return PTR_ERR(clk);
 	}
 
diff --git a/drivers/clocksource/timer-efm32.c b/drivers/clocksource/timer-efm32.c
index 5a22cb0..441a4b9 100644
--- a/drivers/clocksource/timer-efm32.c
+++ b/drivers/clocksource/timer-efm32.c
@@ -119,13 +119,6 @@
 	},
 };
 
-static struct irqaction efm32_clock_event_irq = {
-	.name = "efm32 clockevent",
-	.flags = IRQF_TIMER,
-	.handler = efm32_clock_event_handler,
-	.dev_id = &clock_event_ddata,
-};
-
 static int __init efm32_clocksource_init(struct device_node *np)
 {
 	struct clk *clk;
@@ -230,7 +223,8 @@
 					DIV_ROUND_CLOSEST(rate, 1024),
 					0xf, 0xffff);
 
-	ret = setup_irq(irq, &efm32_clock_event_irq);
+	ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER,
+			  "efm32 clockevent", &clock_event_ddata);
 	if (ret) {
 		pr_err("Failed setup irq\n");
 		goto err_setup_irq;
diff --git a/drivers/clocksource/timer-fsl-ftm.c b/drivers/clocksource/timer-fsl-ftm.c
index a9d9a3c..12a2ed7 100644
--- a/drivers/clocksource/timer-fsl-ftm.c
+++ b/drivers/clocksource/timer-fsl-ftm.c
@@ -176,13 +176,6 @@
 	.rating			= 300,
 };
 
-static struct irqaction ftm_timer_irq = {
-	.name		= "Freescale ftm timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ftm_evt_interrupt,
-	.dev_id		= &ftm_clockevent,
-};
-
 static int __init ftm_clockevent_init(unsigned long freq, int irq)
 {
 	int err;
@@ -192,7 +185,8 @@
 
 	ftm_reset_counter(priv->clkevt_base);
 
-	err = setup_irq(irq, &ftm_timer_irq);
+	err = request_irq(irq, ftm_evt_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "Freescale ftm timer", &ftm_clockevent);
 	if (err) {
 		pr_err("ftm: setup irq failed: %d\n", err);
 		return err;
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index fadff79..edb1d5f 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -38,6 +38,11 @@
 #define TIMER_CR		(0x30)
 
 /*
+ * Control register set to clear for ast2600 only.
+ */
+#define AST2600_TIMER_CR_CLR	(0x3c)
+
+/*
  * Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
  */
 #define TIMER_1_CR_ENABLE	BIT(0)
@@ -97,6 +102,7 @@
 	bool is_aspeed;
 	u32 t1_enable_val;
 	struct clock_event_device clkevt;
+	int (*timer_shutdown)(struct clock_event_device *evt);
 #ifdef CONFIG_ARM
 	struct delay_timer delay_timer;
 #endif
@@ -140,9 +146,7 @@
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	if (fttmr010->is_aspeed) {
 		/*
@@ -164,6 +168,16 @@
 	return 0;
 }
 
+static int ast2600_timer_shutdown(struct clock_event_device *evt)
+{
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	/* Stop */
+	writel(fttmr010->t1_enable_val, fttmr010->base + AST2600_TIMER_CR_CLR);
+
+	return 0;
+}
+
 static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 {
 	struct fttmr010 *fttmr010 = to_fttmr010(evt);
@@ -183,9 +197,7 @@
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup counter start from 0 or ~0 */
 	writel(0, fttmr010->base + TIMER1_COUNT);
@@ -211,9 +223,7 @@
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup timer to fire at 1/HZ intervals. */
 	if (fttmr010->is_aspeed) {
@@ -249,7 +259,21 @@
 	return IRQ_HANDLED;
 }
 
-static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
+static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	writel(0x1, fttmr010->base + TIMER_INTR_STATE);
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static int __init fttmr010_common_init(struct device_node *np,
+		bool is_aspeed,
+		int (*timer_shutdown)(struct clock_event_device *),
+		irq_handler_t irq_handler)
 {
 	struct fttmr010 *fttmr010;
 	int irq;
@@ -350,6 +374,8 @@
 				     fttmr010->tick_rate);
 	}
 
+	fttmr010->timer_shutdown = timer_shutdown;
+
 	/*
 	 * Setup clockevent timer (interrupt-driven) on timer 1.
 	 */
@@ -357,7 +383,7 @@
 	writel(0, fttmr010->base + TIMER1_LOAD);
 	writel(0, fttmr010->base + TIMER1_MATCH1);
 	writel(0, fttmr010->base + TIMER1_MATCH2);
-	ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
+	ret = request_irq(irq, irq_handler, IRQF_TIMER,
 			  "FTTMR010-TIMER1", &fttmr010->clkevt);
 	if (ret) {
 		pr_err("FTTMR010-TIMER1 no IRQ\n");
@@ -370,10 +396,10 @@
 	fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
 		CLOCK_EVT_FEAT_ONESHOT;
 	fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
-	fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
+	fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
 	fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
 	fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
-	fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
+	fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
 	fttmr010->clkevt.cpumask = cpumask_of(0);
 	fttmr010->clkevt.irq = irq;
 	clockevents_config_and_register(&fttmr010->clkevt,
@@ -404,14 +430,25 @@
 	return ret;
 }
 
+static __init int ast2600_timer_init(struct device_node *np)
+{
+	return fttmr010_common_init(np, true,
+			ast2600_timer_shutdown,
+			ast2600_timer_interrupt);
+}
+
 static __init int aspeed_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, true);
+	return fttmr010_common_init(np, true,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 static __init int fttmr010_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, false);
+	return fttmr010_common_init(np, false,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
@@ -419,3 +456,4 @@
 TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
 TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
 TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2600, "aspeed,ast2600-timer", ast2600_timer_init);
diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index 706c0d0..7b2c70f 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -67,7 +67,6 @@
 	struct clk *clk_ipg;
 	const struct imx_gpt_data *gpt;
 	struct clock_event_device ced;
-	struct irqaction act;
 };
 
 struct imx_gpt_data {
@@ -273,7 +272,6 @@
 static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 {
 	struct clock_event_device *ced = &imxtm->ced;
-	struct irqaction *act = &imxtm->act;
 
 	ced->name = "mxc_timer1";
 	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
@@ -287,12 +285,8 @@
 	clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
 					0xff, 0xfffffffe);
 
-	act->name = "i.MX Timer Tick";
-	act->flags = IRQF_TIMER | IRQF_IRQPOLL;
-	act->handler = mxc_timer_interrupt;
-	act->dev_id = ced;
-
-	return setup_irq(imxtm->irq, act);
+	return request_irq(imxtm->irq, mxc_timer_interrupt,
+			   IRQF_TIMER | IRQF_IRQPOLL, "i.MX Timer Tick", ced);
 }
 
 static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
index b7c80a3..18b90fc 100644
--- a/drivers/clocksource/timer-imx-sysctr.c
+++ b/drivers/clocksource/timer-imx-sysctr.c
@@ -4,8 +4,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include "timer-of.h"
 
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
index c1d52d5..2cdc077 100644
--- a/drivers/clocksource/timer-imx-tpm.c
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -8,8 +8,6 @@
 #include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
 #include "timer-of.h"
@@ -63,17 +61,19 @@
 	writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
 }
 
-static struct delay_timer tpm_delay_timer;
-
 static inline unsigned long tpm_read_counter(void)
 {
 	return readl(timer_base + TPM_CNT);
 }
 
+#if defined(CONFIG_ARM)
+static struct delay_timer tpm_delay_timer;
+
 static unsigned long tpm_read_current_timer(void)
 {
 	return tpm_read_counter();
 }
+#endif
 
 static u64 notrace tpm_read_sched_clock(void)
 {
@@ -146,9 +146,11 @@
 
 static int __init tpm_clocksource_init(void)
 {
+#if defined(CONFIG_ARM)
 	tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
 	tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3;
 	register_current_timer_delay(&tpm_delay_timer);
+#endif
 
 	sched_clock_register(tpm_read_sched_clock, counter_width,
 			     timer_of_rate(&to_tpm) >> 3);
diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index c90a69c..b0fcbaa 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -123,13 +123,6 @@
 	.rating			= 300,
 };
 
-static struct irqaction integrator_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-	.dev_id		= &integrator_clockevent,
-};
-
 static int integrator_clockevent_init(unsigned long inrate,
 				      void __iomem *base, int irq)
 {
@@ -149,7 +142,9 @@
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	ret = setup_irq(irq, &integrator_timer_irq);
+	ret = request_irq(irq, integrator_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "timer",
+			  &integrator_clockevent);
 	if (ret)
 		return ret;
 
diff --git a/drivers/clocksource/timer-meson6.c b/drivers/clocksource/timer-meson6.c
index 9e8b467..99f5510 100644
--- a/drivers/clocksource/timer-meson6.c
+++ b/drivers/clocksource/timer-meson6.c
@@ -150,13 +150,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction meson6_timer_irq = {
-	.name		= "meson6_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= meson6_timer_interrupt,
-	.dev_id		= &meson6_clockevent,
-};
-
 static int __init meson6_timer_init(struct device_node *node)
 {
 	u32 val;
@@ -194,7 +187,9 @@
 	/* Stop the timer A */
 	meson6_clkevt_time_stop();
 
-	ret = setup_irq(irq, &meson6_timer_irq);
+	ret = request_irq(irq, meson6_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer",
+			  &meson6_clockevent);
 	if (ret) {
 		pr_warn("failed to setup irq %d\n", irq);
 		return ret;
diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
new file mode 100644
index 0000000..59e11ca
--- /dev/null
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 64-bit Periodic Interval Timer driver
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define MCHP_PIT64B_CR			0x00	/* Control Register */
+#define MCHP_PIT64B_CR_START		BIT(0)
+#define MCHP_PIT64B_CR_SWRST		BIT(8)
+
+#define MCHP_PIT64B_MR			0x04	/* Mode Register */
+#define MCHP_PIT64B_MR_CONT		BIT(0)
+#define MCHP_PIT64B_MR_ONE_SHOT		(0)
+#define MCHP_PIT64B_MR_SGCLK		BIT(3)
+#define MCHP_PIT64B_MR_PRES		GENMASK(11, 8)
+
+#define MCHP_PIT64B_LSB_PR		0x08	/* LSB Period Register */
+
+#define MCHP_PIT64B_MSB_PR		0x0C	/* MSB Period Register */
+
+#define MCHP_PIT64B_IER			0x10	/* Interrupt Enable Register */
+#define MCHP_PIT64B_IER_PERIOD		BIT(0)
+
+#define MCHP_PIT64B_ISR			0x1C	/* Interrupt Status Register */
+
+#define MCHP_PIT64B_TLSBR		0x20	/* Timer LSB Register */
+
+#define MCHP_PIT64B_TMSBR		0x24	/* Timer MSB Register */
+
+#define MCHP_PIT64B_PRES_MAX		0x10
+#define MCHP_PIT64B_LSBMASK		GENMASK_ULL(31, 0)
+#define MCHP_PIT64B_PRES_TO_MODE(p)	(MCHP_PIT64B_MR_PRES & ((p) << 8))
+#define MCHP_PIT64B_MODE_TO_PRES(m)	((MCHP_PIT64B_MR_PRES & (m)) >> 8)
+#define MCHP_PIT64B_DEF_CS_FREQ		5000000UL	/* 5 MHz */
+#define MCHP_PIT64B_DEF_CE_FREQ		32768		/* 32 KHz */
+
+#define MCHP_PIT64B_NAME		"pit64b"
+
+/**
+ * struct mchp_pit64b_timer - PIT64B timer data structure
+ * @base: base address of PIT64B hardware block
+ * @pclk: PIT64B's peripheral clock
+ * @gclk: PIT64B's generic clock
+ * @mode: precomputed value for mode register
+ */
+struct mchp_pit64b_timer {
+	void __iomem	*base;
+	struct clk	*pclk;
+	struct clk	*gclk;
+	u32		mode;
+};
+
+/**
+ * mchp_pit64b_clkevt - PIT64B clockevent data structure
+ * @timer: PIT64B timer
+ * @clkevt: clockevent
+ */
+struct mchp_pit64b_clkevt {
+	struct mchp_pit64b_timer	timer;
+	struct clock_event_device	clkevt;
+};
+
+#define to_mchp_pit64b_timer(x) \
+	((struct mchp_pit64b_timer *)container_of(x,\
+		struct mchp_pit64b_clkevt, clkevt))
+
+/* Base address for clocksource timer. */
+static void __iomem *mchp_pit64b_cs_base;
+/* Default cycles for clockevent timer. */
+static u64 mchp_pit64b_ce_cycles;
+
+static inline u64 mchp_pit64b_cnt_read(void __iomem *base)
+{
+	unsigned long	flags;
+	u32		low, high;
+
+	raw_local_irq_save(flags);
+
+	/*
+	 * When using a 64 bit period TLSB must be read first, followed by the
+	 * read of TMSB. This sequence generates an atomic read of the 64 bit
+	 * timer value whatever the lapse of time between the accesses.
+	 */
+	low = readl_relaxed(base + MCHP_PIT64B_TLSBR);
+	high = readl_relaxed(base + MCHP_PIT64B_TMSBR);
+
+	raw_local_irq_restore(flags);
+
+	return (((u64)high << 32) | low);
+}
+
+static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer,
+				     u64 cycles, u32 mode, u32 irqs)
+{
+	u32 low, high;
+
+	low = cycles & MCHP_PIT64B_LSBMASK;
+	high = cycles >> 32;
+
+	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+	writel_relaxed(mode | timer->mode, timer->base + MCHP_PIT64B_MR);
+	writel_relaxed(high, timer->base + MCHP_PIT64B_MSB_PR);
+	writel_relaxed(low, timer->base + MCHP_PIT64B_LSB_PR);
+	writel_relaxed(irqs, timer->base + MCHP_PIT64B_IER);
+	writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
+}
+
+static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
+{
+	return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+}
+
+static u64 mchp_pit64b_sched_read_clk(void)
+{
+	return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+}
+
+static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
+{
+	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+
+	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+
+	return 0;
+}
+
+static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
+{
+	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+
+	mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
+			  MCHP_PIT64B_IER_PERIOD);
+
+	return 0;
+}
+
+static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+					     struct clock_event_device *cedev)
+{
+	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+
+	mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+			  MCHP_PIT64B_IER_PERIOD);
+
+	return 0;
+}
+
+static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
+{
+	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+
+	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+		clk_disable_unprepare(timer->gclk);
+	clk_disable_unprepare(timer->pclk);
+}
+
+static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
+{
+	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+
+	clk_prepare_enable(timer->pclk);
+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+		clk_prepare_enable(timer->gclk);
+}
+
+static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
+{
+	struct mchp_pit64b_clkevt *irq_data = dev_id;
+
+	/* Need to clear the interrupt. */
+	readl_relaxed(irq_data->timer.base + MCHP_PIT64B_ISR);
+
+	irq_data->clkevt.event_handler(&irq_data->clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void __init mchp_pit64b_pres_compute(u32 *pres, u32 clk_rate,
+					    u32 max_rate)
+{
+	u32 tmp;
+
+	for (*pres = 0; *pres < MCHP_PIT64B_PRES_MAX; (*pres)++) {
+		tmp = clk_rate / (*pres + 1);
+		if (tmp <= max_rate)
+			break;
+	}
+
+	/* Use the bigest prescaler if we didn't match one. */
+	if (*pres == MCHP_PIT64B_PRES_MAX)
+		*pres = MCHP_PIT64B_PRES_MAX - 1;
+}
+
+/**
+ * mchp_pit64b_init_mode - prepare PIT64B mode register value to be used at
+ *			   runtime; this includes prescaler and SGCLK bit
+ *
+ * PIT64B timer may be fed by gclk or pclk. When gclk is used its rate has to
+ * be at least 3 times lower that pclk's rate. pclk rate is fixed, gclk rate
+ * could be changed via clock APIs. The chosen clock (pclk or gclk) could be
+ * divided by the internal PIT64B's divider.
+ *
+ * This function, first tries to use GCLK by requesting the desired rate from
+ * PMC and then using the internal PIT64B prescaler, if any, to reach the
+ * requested rate. If PCLK/GCLK < 3 (condition requested by PIT64B hardware)
+ * then the function falls back on using PCLK as clock source for PIT64B timer
+ * choosing the highest prescaler in case it doesn't locate one to match the
+ * requested frequency.
+ *
+ * Below is presented the PIT64B block in relation with PMC:
+ *
+ *                                PIT64B
+ *  PMC             +------------------------------------+
+ * +----+           |   +-----+                          |
+ * |    |-->gclk -->|-->|     |    +---------+  +-----+  |
+ * |    |           |   | MUX |--->| Divider |->|timer|  |
+ * |    |-->pclk -->|-->|     |    +---------+  +-----+  |
+ * +----+           |   +-----+                          |
+ *                  |      ^                             |
+ *                  |     sel                            |
+ *                  +------------------------------------+
+ *
+ * Where:
+ *	- gclk rate <= pclk rate/3
+ *	- gclk rate could be requested from PMC
+ *	- pclk rate is fixed (cannot be requested from PMC)
+ */
+static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
+					unsigned long max_rate)
+{
+	unsigned long pclk_rate, diff = 0, best_diff = ULONG_MAX;
+	long gclk_round = 0;
+	u32 pres, best_pres = 0;
+
+	pclk_rate = clk_get_rate(timer->pclk);
+	if (!pclk_rate)
+		return -EINVAL;
+
+	timer->mode = 0;
+
+	/* Try using GCLK. */
+	gclk_round = clk_round_rate(timer->gclk, max_rate);
+	if (gclk_round < 0)
+		goto pclk;
+
+	if (pclk_rate / gclk_round < 3)
+		goto pclk;
+
+	mchp_pit64b_pres_compute(&pres, gclk_round, max_rate);
+	best_diff = abs(gclk_round / (pres + 1) - max_rate);
+	best_pres = pres;
+
+	if (!best_diff) {
+		timer->mode |= MCHP_PIT64B_MR_SGCLK;
+		clk_set_rate(timer->gclk, gclk_round);
+		goto done;
+	}
+
+pclk:
+	/* Check if requested rate could be obtained using PCLK. */
+	mchp_pit64b_pres_compute(&pres, pclk_rate, max_rate);
+	diff = abs(pclk_rate / (pres + 1) - max_rate);
+
+	if (best_diff > diff) {
+		/* Use PCLK. */
+		best_pres = pres;
+	} else {
+		/* Use GCLK. */
+		timer->mode |= MCHP_PIT64B_MR_SGCLK;
+		clk_set_rate(timer->gclk, gclk_round);
+	}
+
+done:
+	timer->mode |= MCHP_PIT64B_PRES_TO_MODE(best_pres);
+
+	pr_info("PIT64B: using clk=%s with prescaler %u, freq=%lu [Hz]\n",
+		timer->mode & MCHP_PIT64B_MR_SGCLK ? "gclk" : "pclk", best_pres,
+		timer->mode & MCHP_PIT64B_MR_SGCLK ?
+		gclk_round / (best_pres + 1) : pclk_rate / (best_pres + 1));
+
+	return 0;
+}
+
+static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
+					  u32 clk_rate)
+{
+	int ret;
+
+	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
+
+	mchp_pit64b_cs_base = timer->base;
+
+	ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate,
+				    210, 64, mchp_pit64b_clksrc_read);
+	if (ret) {
+		pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
+
+		/* Stop timer. */
+		writel_relaxed(MCHP_PIT64B_CR_SWRST,
+			       timer->base + MCHP_PIT64B_CR);
+
+		return ret;
+	}
+
+	sched_clock_register(mchp_pit64b_sched_read_clk, 64, clk_rate);
+
+	return 0;
+}
+
+static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
+					  u32 clk_rate, u32 irq)
+{
+	struct mchp_pit64b_clkevt *ce;
+	int ret;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce)
+		return -ENOMEM;
+
+	mchp_pit64b_ce_cycles = DIV_ROUND_CLOSEST(clk_rate, HZ);
+
+	ce->timer.base = timer->base;
+	ce->timer.pclk = timer->pclk;
+	ce->timer.gclk = timer->gclk;
+	ce->timer.mode = timer->mode;
+	ce->clkevt.name = MCHP_PIT64B_NAME;
+	ce->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
+	ce->clkevt.rating = 150;
+	ce->clkevt.set_state_shutdown = mchp_pit64b_clkevt_shutdown;
+	ce->clkevt.set_state_periodic = mchp_pit64b_clkevt_set_periodic;
+	ce->clkevt.set_next_event = mchp_pit64b_clkevt_set_next_event;
+	ce->clkevt.suspend = mchp_pit64b_clkevt_suspend;
+	ce->clkevt.resume = mchp_pit64b_clkevt_resume;
+	ce->clkevt.cpumask = cpumask_of(0);
+	ce->clkevt.irq = irq;
+
+	ret = request_irq(irq, mchp_pit64b_interrupt, IRQF_TIMER,
+			  "pit64b_tick", ce);
+	if (ret) {
+		pr_debug("clkevt: Failed to setup PIT64B IRQ\n");
+		kfree(ce);
+		return ret;
+	}
+
+	clockevents_config_and_register(&ce->clkevt, clk_rate, 1, ULONG_MAX);
+
+	return 0;
+}
+
+static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
+					    bool clkevt)
+{
+	u32 freq = clkevt ? MCHP_PIT64B_DEF_CE_FREQ : MCHP_PIT64B_DEF_CS_FREQ;
+	struct mchp_pit64b_timer timer;
+	unsigned long clk_rate;
+	u32 irq = 0;
+	int ret;
+
+	/* Parse DT node. */
+	timer.pclk = of_clk_get_by_name(node, "pclk");
+	if (IS_ERR(timer.pclk))
+		return PTR_ERR(timer.pclk);
+
+	timer.gclk = of_clk_get_by_name(node, "gclk");
+	if (IS_ERR(timer.gclk))
+		return PTR_ERR(timer.gclk);
+
+	timer.base = of_iomap(node, 0);
+	if (!timer.base)
+		return -ENXIO;
+
+	if (clkevt) {
+		irq = irq_of_parse_and_map(node, 0);
+		if (!irq) {
+			ret = -ENODEV;
+			goto io_unmap;
+		}
+	}
+
+	/* Initialize mode (prescaler + SGCK bit). To be used at runtime. */
+	ret = mchp_pit64b_init_mode(&timer, freq);
+	if (ret)
+		goto irq_unmap;
+
+	ret = clk_prepare_enable(timer.pclk);
+	if (ret)
+		goto irq_unmap;
+
+	if (timer.mode & MCHP_PIT64B_MR_SGCLK) {
+		ret = clk_prepare_enable(timer.gclk);
+		if (ret)
+			goto pclk_unprepare;
+
+		clk_rate = clk_get_rate(timer.gclk);
+	} else {
+		clk_rate = clk_get_rate(timer.pclk);
+	}
+	clk_rate = clk_rate / (MCHP_PIT64B_MODE_TO_PRES(timer.mode) + 1);
+
+	if (clkevt)
+		ret = mchp_pit64b_init_clkevt(&timer, clk_rate, irq);
+	else
+		ret = mchp_pit64b_init_clksrc(&timer, clk_rate);
+
+	if (ret)
+		goto gclk_unprepare;
+
+	return 0;
+
+gclk_unprepare:
+	if (timer.mode & MCHP_PIT64B_MR_SGCLK)
+		clk_disable_unprepare(timer.gclk);
+pclk_unprepare:
+	clk_disable_unprepare(timer.pclk);
+irq_unmap:
+	irq_dispose_mapping(irq);
+io_unmap:
+	iounmap(timer.base);
+
+	return ret;
+}
+
+static int __init mchp_pit64b_dt_init(struct device_node *node)
+{
+	static int inits;
+
+	switch (inits++) {
+	case 0:
+		/* 1st request, register clockevent. */
+		return mchp_pit64b_dt_init_timer(node, true);
+	case 1:
+		/* 2nd request, register clocksource. */
+		return mchp_pit64b_dt_init_timer(node, false);
+	}
+
+	/* The rest, don't care. */
+	return -EINVAL;
+}
+
+TIMER_OF_DECLARE(mchp_pit64b, "microchip,sam9x60-pit64b", mchp_pit64b_dt_init);
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index a3c73e9..572da47 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -57,8 +57,8 @@
 	if (of_irq->name) {
 		of_irq->irq = ret = of_irq_get_byname(np, of_irq->name);
 		if (ret < 0) {
-			pr_err("Failed to get interrupt %s for %s\n",
-			       of_irq->name, np->full_name);
+			pr_err("Failed to get interrupt %s for %pOF\n",
+			       of_irq->name, np);
 			return ret;
 		}
 	} else	{
diff --git a/drivers/clocksource/timer-orion.c b/drivers/clocksource/timer-orion.c
index 32b2563..5101e83 100644
--- a/drivers/clocksource/timer-orion.c
+++ b/drivers/clocksource/timer-orion.c
@@ -114,12 +114,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_clkevt_irq = {
-	.name		= "orion_event",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_clkevt_irq_handler,
-};
-
 static int __init orion_timer_init(struct device_node *np)
 {
 	unsigned long rate;
@@ -173,7 +167,8 @@
 	sched_clock_register(orion_read_sched_clock, 32, rate);
 
 	/* setup timer1 as clockevent timer */
-	ret = setup_irq(irq, &orion_clkevt_irq);
+	ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
+			  "orion_event", NULL);
 	if (ret) {
 		pr_err("%pOFn: unable to setup irq\n", np);
 		goto out_unprep_clk;
diff --git a/drivers/clocksource/timer-owl.c b/drivers/clocksource/timer-owl.c
index 900fe73..ac97420 100644
--- a/drivers/clocksource/timer-owl.c
+++ b/drivers/clocksource/timer-owl.c
@@ -135,8 +135,11 @@
 	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		pr_err("Failed to get clock for clocksource (%d)\n", ret);
+		return ret;
+	}
 
 	rate = clk_get_rate(clk);
 
@@ -144,8 +147,12 @@
 	owl_timer_set_enabled(owl_clksrc_base, true);
 
 	sched_clock_register(owl_timer_sched_read, 32, rate);
-	clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
-			      rate, 200, 32, clocksource_mmio_readl_up);
+	ret = clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+				    rate, 200, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("Failed to register clocksource (%d)\n", ret);
+		return ret;
+	}
 
 	owl_timer_reset(owl_clkevt_base);
 
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index d4a9dcf..c5d4693 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -165,14 +165,6 @@
 	.resume = sirfsoc_clocksource_resume,
 };
 
-static struct irqaction sirfsoc_timer_irq = {
-	.name = "sirfsoc_timer0",
-	.flags = IRQF_TIMER,
-	.irq = 0,
-	.handler = sirfsoc_timer_interrupt,
-	.dev_id = &sirfsoc_clockevent,
-};
-
 /* Overwrite weak default sched_clock with more precise one */
 static u64 notrace sirfsoc_read_sched_clock(void)
 {
@@ -190,6 +182,7 @@
 static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 {
 	unsigned long rate;
+	unsigned int irq;
 	struct clk *clk;
 	int ret;
 
@@ -218,7 +211,7 @@
 		return -ENXIO;
 	}
 
-	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
+	irq = irq_of_parse_and_map(np, 0);
 
 	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
 		sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
@@ -234,7 +227,8 @@
 
 	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
-	ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+	ret = request_irq(irq, sirfsoc_timer_interrupt, IRQF_TIMER,
+			  "sirfsoc_timer0", &sirfsoc_clockevent);
 	if (ret) {
 		pr_err("Failed to setup irq\n");
 		return ret;
diff --git a/drivers/clocksource/timer-probe.c b/drivers/clocksource/timer-probe.c
index ee9574d..b7860bc 100644
--- a/drivers/clocksource/timer-probe.c
+++ b/drivers/clocksource/timer-probe.c
@@ -11,7 +11,7 @@
 extern struct of_device_id __timer_of_table[];
 
 static const struct of_device_id __timer_of_table_sentinel
-	__used __section(__timer_of_table_end);
+	__used __section("__timer_of_table_end");
 
 void __init timer_probe(void)
 {
diff --git a/drivers/clocksource/timer-pxa.c b/drivers/clocksource/timer-pxa.c
index 913a5d3..7ad0e5a 100644
--- a/drivers/clocksource/timer-pxa.c
+++ b/drivers/clocksource/timer-pxa.c
@@ -143,13 +143,6 @@
 	.resume			= pxa_timer_resume,
 };
 
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
 static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 {
 	int ret;
@@ -161,7 +154,8 @@
 
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	ret = setup_irq(irq, &pxa_ost0_irq);
+	ret = request_irq(irq, pxa_ost0_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "ost0", &ckevt_pxa_osmr0);
 	if (ret) {
 		pr_err("Failed to setup irq\n");
 		return ret;
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 4b04ffb..c51c5ed 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -3,27 +3,33 @@
  * Copyright (C) 2012 Regents of the University of California
  * Copyright (C) 2017 SiFive
  *
- * All RISC-V systems have a timer attached to every hart.  These timers can be
- * read from the "time" and "timeh" CSRs, and can use the SBI to setup
- * events.
+ * All RISC-V systems have a timer attached to every hart.  These timers can
+ * either be read from the "time" and "timeh" CSRs, and can use the SBI to
+ * setup events, or directly accessed using MMIO registers.
  */
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <asm/smp.h>
 #include <asm/sbi.h>
+#include <asm/timex.h>
 
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
-	csr_set(sie, SIE_STIE);
+	csr_set(CSR_IE, IE_TIE);
 	sbi_set_timer(get_cycles64() + delta);
 	return 0;
 }
 
+static unsigned int riscv_clock_event_irq;
 static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
 	.name			= "riscv_timer_clockevent",
 	.features		= CLOCK_EVT_FEAT_ONESHOT,
@@ -59,30 +65,36 @@
 	struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
 
 	ce->cpumask = cpumask_of(cpu);
+	ce->irq = riscv_clock_event_irq;
 	clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
 
-	csr_set(sie, SIE_STIE);
+	enable_percpu_irq(riscv_clock_event_irq,
+			  irq_get_trigger_type(riscv_clock_event_irq));
 	return 0;
 }
 
 static int riscv_timer_dying_cpu(unsigned int cpu)
 {
-	csr_clear(sie, SIE_STIE);
+	disable_percpu_irq(riscv_clock_event_irq);
 	return 0;
 }
 
 /* called directly from the low-level interrupt handler */
-void riscv_timer_interrupt(void)
+static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
 
-	csr_clear(sie, SIE_STIE);
+	csr_clear(CSR_IE, IE_TIE);
 	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
 }
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
 	int cpuid, hartid, error;
+	struct device_node *child;
+	struct irq_domain *domain;
 
 	hartid = riscv_of_processor_hartid(n);
 	if (hartid < 0) {
@@ -100,6 +112,25 @@
 	if (cpuid != smp_processor_id())
 		return 0;
 
+	domain = NULL;
+	child = of_get_compatible_child(n, "riscv,cpu-intc");
+	if (!child) {
+		pr_err("Failed to find INTC node [%pOF]\n", n);
+		return -ENODEV;
+	}
+	domain = irq_find_host(child);
+	of_node_put(child);
+	if (!domain) {
+		pr_err("Failed to find IRQ domain for node [%pOF]\n", n);
+		return -ENODEV;
+	}
+
+	riscv_clock_event_irq = irq_create_mapping(domain, RV_IRQ_TIMER);
+	if (!riscv_clock_event_irq) {
+		pr_err("Failed to map timer interrupt for node [%pOF]\n", n);
+		return -ENODEV;
+	}
+
 	pr_info("%s: Registering clocksource cpuid [%d] hartid [%d]\n",
 	       __func__, cpuid, hartid);
 	error = clocksource_register_hz(&riscv_clocksource, riscv_timebase);
@@ -111,6 +142,14 @@
 
 	sched_clock_register(riscv_sched_clock, 64, riscv_timebase);
 
+	error = request_percpu_irq(riscv_clock_event_irq,
+				    riscv_timer_interrupt,
+				    "riscv-timer", &riscv_clock_event);
+	if (error) {
+		pr_err("registering percpu irq failed [%d]\n", error);
+		return error;
+	}
+
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
 			 "clockevents/riscv/timer:starting",
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
diff --git a/drivers/clocksource/timer-sp.h b/drivers/clocksource/timer-sp.h
index b2037eb..811f840 100644
--- a/drivers/clocksource/timer-sp.h
+++ b/drivers/clocksource/timer-sp.h
@@ -10,6 +10,7 @@
  *
  * Every SP804 contains two identical timers.
  */
+#define NR_TIMERS	2
 #define TIMER_1_BASE	0x00
 #define TIMER_2_BASE	0x20
 
@@ -29,3 +30,34 @@
 #define TIMER_RIS	0x10			/*  CVR ro */
 #define TIMER_MIS	0x14			/*  CVR ro */
 #define TIMER_BGLOAD	0x18			/*  CVR rw */
+
+struct sp804_timer {
+	int load;
+	int load_h;
+	int value;
+	int value_h;
+	int ctrl;
+	int intclr;
+	int ris;
+	int mis;
+	int bgload;
+	int bgload_h;
+	int timer_base[NR_TIMERS];
+	int width;
+};
+
+struct sp804_clkevt {
+	void __iomem *base;
+	void __iomem *load;
+	void __iomem *load_h;
+	void __iomem *value;
+	void __iomem *value_h;
+	void __iomem *ctrl;
+	void __iomem *intclr;
+	void __iomem *ris;
+	void __iomem *mis;
+	void __iomem *bgload;
+	void __iomem *bgload_h;
+	unsigned long reload;
+	int width;
+};
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 9c84198..6e8ad4a 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -18,15 +18,57 @@
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
-#include <clocksource/timer-sp804.h>
-
 #include "timer-sp.h"
 
-static long __init sp804_get_clock_rate(struct clk *clk)
+/* Hisilicon 64-bit timer(a variant of ARM SP804) */
+#define HISI_TIMER_1_BASE	0x00
+#define HISI_TIMER_2_BASE	0x40
+#define HISI_TIMER_LOAD		0x00
+#define HISI_TIMER_LOAD_H	0x04
+#define HISI_TIMER_VALUE	0x08
+#define HISI_TIMER_VALUE_H	0x0c
+#define HISI_TIMER_CTRL		0x10
+#define HISI_TIMER_INTCLR	0x14
+#define HISI_TIMER_RIS		0x18
+#define HISI_TIMER_MIS		0x1c
+#define HISI_TIMER_BGLOAD	0x20
+#define HISI_TIMER_BGLOAD_H	0x24
+
+
+struct sp804_timer __initdata arm_sp804_timer = {
+	.load		= TIMER_LOAD,
+	.value		= TIMER_VALUE,
+	.ctrl		= TIMER_CTRL,
+	.intclr		= TIMER_INTCLR,
+	.timer_base	= {TIMER_1_BASE, TIMER_2_BASE},
+	.width		= 32,
+};
+
+struct sp804_timer __initdata hisi_sp804_timer = {
+	.load		= HISI_TIMER_LOAD,
+	.load_h		= HISI_TIMER_LOAD_H,
+	.value		= HISI_TIMER_VALUE,
+	.value_h	= HISI_TIMER_VALUE_H,
+	.ctrl		= HISI_TIMER_CTRL,
+	.intclr		= HISI_TIMER_INTCLR,
+	.timer_base	= {HISI_TIMER_1_BASE, HISI_TIMER_2_BASE},
+	.width		= 64,
+};
+
+static struct sp804_clkevt sp804_clkevt[NR_TIMERS];
+
+static long __init sp804_get_clock_rate(struct clk *clk, const char *name)
 {
 	long rate;
 	int err;
 
+	if (!clk)
+		clk = clk_get_sys("sp804", name);
+	if (IS_ERR(clk)) {
+		pr_err("sp804: %s clock not found: %ld\n", name, PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
 	err = clk_prepare(clk);
 	if (err) {
 		pr_err("sp804: clock failed to prepare: %d\n", err);
@@ -53,50 +95,57 @@
 	return rate;
 }
 
-static void __iomem *sched_clock_base;
+static struct sp804_clkevt * __init sp804_clkevt_get(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < NR_TIMERS; i++) {
+		if (sp804_clkevt[i].base == base)
+			return &sp804_clkevt[i];
+	}
+
+	/* It's impossible to reach here */
+	WARN_ON(1);
+
+	return NULL;
+}
+
+static struct sp804_clkevt *sched_clkevt;
 
 static u64 notrace sp804_read(void)
 {
-	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+	return ~readl_relaxed(sched_clkevt->value);
 }
 
-void __init sp804_timer_disable(void __iomem *base)
-{
-	writel(0, base + TIMER_CTRL);
-}
-
-int  __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
-						     const char *name,
-						     struct clk *clk,
-						     int use_sched_clock)
+int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
+						  const char *name,
+						  struct clk *clk,
+						  int use_sched_clock)
 {
 	long rate;
+	struct sp804_clkevt *clkevt;
 
-	if (!clk) {
-		clk = clk_get_sys("sp804", name);
-		if (IS_ERR(clk)) {
-			pr_err("sp804: clock not found: %d\n",
-			       (int)PTR_ERR(clk));
-			return PTR_ERR(clk);
-		}
-	}
-
-	rate = sp804_get_clock_rate(clk);
+	rate = sp804_get_clock_rate(clk, name);
 	if (rate < 0)
 		return -EINVAL;
 
-	/* setup timer 0 as free-running clocksource */
-	writel(0, base + TIMER_CTRL);
-	writel(0xffffffff, base + TIMER_LOAD);
-	writel(0xffffffff, base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		base + TIMER_CTRL);
+	clkevt = sp804_clkevt_get(base);
 
-	clocksource_mmio_init(base + TIMER_VALUE, name,
+	writel(0, clkevt->ctrl);
+	writel(0xffffffff, clkevt->load);
+	writel(0xffffffff, clkevt->value);
+	if (clkevt->width == 64) {
+		writel(0xffffffff, clkevt->load_h);
+		writel(0xffffffff, clkevt->value_h);
+	}
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+		clkevt->ctrl);
+
+	clocksource_mmio_init(clkevt->value, name,
 		rate, 200, 32, clocksource_mmio_readl_down);
 
 	if (use_sched_clock) {
-		sched_clock_base = base;
+		sched_clkevt = clkevt;
 		sched_clock_register(sp804_read, 32, rate);
 	}
 
@@ -104,8 +153,7 @@
 }
 
 
-static void __iomem *clkevt_base;
-static unsigned long clkevt_reload;
+static struct sp804_clkevt *common_clkevt;
 
 /*
  * IRQ handler for the timer
@@ -115,7 +163,7 @@
 	struct clock_event_device *evt = dev_id;
 
 	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
+	writel(1, common_clkevt->intclr);
 
 	evt->event_handler(evt);
 
@@ -124,7 +172,7 @@
 
 static inline void timer_shutdown(struct clock_event_device *evt)
 {
-	writel(0, clkevt_base + TIMER_CTRL);
+	writel(0, common_clkevt->ctrl);
 }
 
 static int sp804_shutdown(struct clock_event_device *evt)
@@ -139,8 +187,8 @@
 			     TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
 
 	timer_shutdown(evt);
-	writel(clkevt_reload, clkevt_base + TIMER_LOAD);
-	writel(ctrl, clkevt_base + TIMER_CTRL);
+	writel(common_clkevt->reload, common_clkevt->load);
+	writel(ctrl, common_clkevt->ctrl);
 	return 0;
 }
 
@@ -150,8 +198,8 @@
 	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
 			     TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE;
 
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl, clkevt_base + TIMER_CTRL);
+	writel(next, common_clkevt->load);
+	writel(ctrl, common_clkevt->ctrl);
 
 	return 0;
 }
@@ -168,48 +216,59 @@
 	.rating			= 300,
 };
 
-static struct irqaction sp804_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sp804_timer_interrupt,
-	.dev_id		= &sp804_clockevent,
-};
-
-int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+int __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+				  struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
 	long rate;
 
-	if (!clk)
-		clk = clk_get_sys("sp804", name);
-	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %d\n", name,
-			(int)PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-
-	rate = sp804_get_clock_rate(clk);
+	rate = sp804_get_clock_rate(clk, name);
 	if (rate < 0)
 		return -EINVAL;
 
-	clkevt_base = base;
-	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
+	common_clkevt = sp804_clkevt_get(base);
+	common_clkevt->reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
 	evt->cpumask = cpu_possible_mask;
 
-	writel(0, base + TIMER_CTRL);
+	writel(0, common_clkevt->ctrl);
 
-	setup_irq(irq, &sp804_timer_irq);
+	if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &sp804_clockevent))
+		pr_err("%s: request_irq() failed\n", "timer");
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 
 	return 0;
 }
 
-static int __init sp804_of_init(struct device_node *np)
+static void __init sp804_clkevt_init(struct sp804_timer *timer, void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < NR_TIMERS; i++) {
+		void __iomem *timer_base;
+		struct sp804_clkevt *clkevt;
+
+		timer_base = base + timer->timer_base[i];
+		clkevt = &sp804_clkevt[i];
+		clkevt->base	= timer_base;
+		clkevt->load	= timer_base + timer->load;
+		clkevt->load_h	= timer_base + timer->load_h;
+		clkevt->value	= timer_base + timer->value;
+		clkevt->value_h	= timer_base + timer->value_h;
+		clkevt->ctrl	= timer_base + timer->ctrl;
+		clkevt->intclr	= timer_base + timer->intclr;
+		clkevt->width	= timer->width;
+	}
+}
+
+static int __init sp804_of_init(struct device_node *np, struct sp804_timer *timer)
 {
 	static bool initialized = false;
 	void __iomem *base;
+	void __iomem *timer1_base;
+	void __iomem *timer2_base;
 	int irq, ret = -EINVAL;
 	u32 irq_num = 0;
 	struct clk *clk1, *clk2;
@@ -219,9 +278,12 @@
 	if (!base)
 		return -ENXIO;
 
+	timer1_base = base + timer->timer_base[0];
+	timer2_base = base + timer->timer_base[1];
+
 	/* Ensure timers are disabled */
-	writel(0, base + TIMER_CTRL);
-	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
+	writel(0, timer1_base + timer->ctrl);
+	writel(0, timer2_base + timer->ctrl);
 
 	if (initialized || !of_device_is_available(np)) {
 		ret = -EINVAL;
@@ -247,24 +309,27 @@
 	if (irq <= 0)
 		goto err;
 
+	sp804_clkevt_init(timer, base);
+
 	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
 	if (irq_num == 2) {
 
-		ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+		ret = sp804_clockevents_init(timer2_base, irq, clk2, name);
 		if (ret)
 			goto err;
 
-		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+		ret = sp804_clocksource_and_sched_clock_init(timer1_base,
+							     name, clk1, 1);
 		if (ret)
 			goto err;
 	} else {
 
-		ret = __sp804_clockevents_init(base, irq, clk1 , name);
+		ret = sp804_clockevents_init(timer1_base, irq, clk1, name);
 		if (ret)
 			goto err;
 
-		ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							      name, clk2, 1);
+		ret = sp804_clocksource_and_sched_clock_init(timer2_base,
+							     name, clk2, 1);
 		if (ret)
 			goto err;
 	}
@@ -275,7 +340,18 @@
 	iounmap(base);
 	return ret;
 }
-TIMER_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+
+static int __init arm_sp804_of_init(struct device_node *np)
+{
+	return sp804_of_init(np, &arm_sp804_timer);
+}
+TIMER_OF_DECLARE(sp804, "arm,sp804", arm_sp804_of_init);
+
+static int __init hisi_sp804_of_init(struct device_node *np)
+{
+	return sp804_of_init(np, &hisi_sp804_timer);
+}
+TIMER_OF_DECLARE(hisi_sp804, "hisilicon,sp804", hisi_sp804_of_init);
 
 static int __init integrator_cp_of_init(struct device_node *np)
 {
@@ -298,13 +374,16 @@
 	}
 
 	/* Ensure timer is disabled */
-	writel(0, base + TIMER_CTRL);
+	writel(0, base + arm_sp804_timer.ctrl);
 
 	if (init_count == 2 || !of_device_is_available(np))
 		goto err;
 
+	sp804_clkevt_init(&arm_sp804_timer, base);
+
 	if (!init_count) {
-		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
+		ret = sp804_clocksource_and_sched_clock_init(base,
+							     name, clk, 0);
 		if (ret)
 			goto err;
 	} else {
@@ -312,7 +391,7 @@
 		if (irq <= 0)
 			goto err;
 
-		ret = __sp804_clockevents_init(base, irq, clk, name);
+		ret = sp804_clockevents_init(base, irq, clk, name);
 		if (ret)
 			goto err;
 	}
diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c
new file mode 100644
index 0000000..db2841d
--- /dev/null
+++ b/drivers/clocksource/timer-stm32-lp.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ *	    Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+
+#define CFGR_PSC_OFFSET		9
+#define STM32_LP_RATING		1000
+#define STM32_TARGET_CLKRATE	(32000 * HZ)
+#define STM32_LP_MAX_PSC	7
+
+struct stm32_lp_private {
+	struct regmap *reg;
+	struct clock_event_device clkevt;
+	unsigned long period;
+	struct device *dev;
+};
+
+static struct stm32_lp_private*
+to_priv(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct stm32_lp_private, clkevt);
+}
+
+static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	regmap_write(priv->reg, STM32_LPTIM_IER, 0);
+	/* clear pending flags */
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_timer(unsigned long evt,
+				       struct clock_event_device *clkevt,
+				       int is_periodic)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	/* disable LPTIMER to be able to write into IER register*/
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	/* enable ARR interrupt */
+	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+	/* enable LPTIMER to be able to write into ARR register */
+	regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+	/* set next event counter */
+	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+
+	/* start counter */
+	if (is_periodic)
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
+	else
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
+{
+	return stm32_clkevent_lp_set_timer(evt, clkevt,
+					   clockevent_state_periodic(clkevt));
+}
+
+static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
+}
+
+static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
+}
+
+static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	if (clkevt->event_handler)
+		clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
+					    unsigned long *rate)
+{
+	int i;
+
+	for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
+		if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
+			break;
+	}
+
+	regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
+
+	/* Adjust rate and period given the prescaler value */
+	*rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
+	priv->period = DIV_ROUND_UP(*rate, HZ);
+}
+
+static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
+				  struct device_node *np, unsigned long rate)
+{
+	priv->clkevt.name = np->full_name;
+	priv->clkevt.cpumask = cpu_possible_mask;
+	priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT;
+	priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
+	priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
+	priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
+	priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
+	priv->clkevt.rating = STM32_LP_RATING;
+
+	clockevents_config_and_register(&priv->clkevt, rate, 0x1,
+					STM32_LPTIM_MAX_ARR);
+}
+
+static int stm32_clkevent_lp_probe(struct platform_device *pdev)
+{
+	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_lp_private *priv;
+	unsigned long rate;
+	int ret, irq;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg = ddata->regmap;
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret)
+		return -EINVAL;
+
+	rate = clk_get_rate(ddata->clk);
+	if (!rate) {
+		ret = -EINVAL;
+		goto out_clk_disable;
+	}
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq <= 0) {
+		ret = irq;
+		goto out_clk_disable;
+	}
+
+	if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
+		ret = device_init_wakeup(&pdev->dev, true);
+		if (ret)
+			goto out_clk_disable;
+
+		ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+		if (ret)
+			goto out_clk_disable;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
+			       IRQF_TIMER, pdev->name, &priv->clkevt);
+	if (ret)
+		goto out_clk_disable;
+
+	stm32_clkevent_lp_set_prescaler(priv, &rate);
+
+	stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
+
+	priv->dev = &pdev->dev;
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(ddata->clk);
+	return ret;
+}
+
+static int stm32_clkevent_lp_remove(struct platform_device *pdev)
+{
+	return -EBUSY; /* cannot unregister clockevent */
+}
+
+static const struct of_device_id stm32_clkevent_lp_of_match[] = {
+	{ .compatible = "st,stm32-lptimer-timer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
+
+static struct platform_driver stm32_clkevent_lp_driver = {
+	.probe	= stm32_clkevent_lp_probe,
+	.remove = stm32_clkevent_lp_remove,
+	.driver	= {
+		.name = "stm32-lptimer-timer",
+		.of_match_table = of_match_ptr(stm32_clkevent_lp_of_match),
+	},
+};
+module_platform_driver(stm32_clkevent_lp_driver);
+
+MODULE_ALIAS("platform:stm32-lptimer-timer");
+MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
index abd5f15..59b0be4 100644
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -21,9 +21,10 @@
  * Roughly modelled after the OMAP1 MPU timer code.
  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
  */
 
+#include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/sched_clock.h>
@@ -76,6 +77,49 @@
 	return ti_32k_read_cycles(&ti_32k_timer.cs);
 }
 
+static void __init ti_32k_timer_enable_clock(struct device_node *np,
+					     const char *name)
+{
+	struct clk *clock;
+	int error;
+
+	clock = of_clk_get_by_name(np->parent, name);
+	if (IS_ERR(clock)) {
+		/* Only some SoCs have a separate interface clock */
+		if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
+			return;
+
+		pr_warn("%s: could not get clock %s %li\n",
+			__func__, name, PTR_ERR(clock));
+		return;
+	}
+
+	error = clk_prepare_enable(clock);
+	if (error) {
+		pr_warn("%s: could not enable %s: %i\n",
+			__func__, name, error);
+		return;
+	}
+}
+
+static void __init ti_32k_timer_module_init(struct device_node *np,
+					    void __iomem *base)
+{
+	void __iomem *sysc = base + 4;
+
+	if (!of_device_is_compatible(np->parent, "ti,sysc"))
+		return;
+
+	ti_32k_timer_enable_clock(np, "fck");
+	ti_32k_timer_enable_clock(np, "ick");
+
+	/*
+	 * Force idle module as wkup domain is active with MPU.
+	 * No need to tag the module disabled for ti-sysc probe.
+	 */
+	writel_relaxed(0, sysc);
+}
+
 static int __init ti_32k_timer_init(struct device_node *np)
 {
 	int ret;
@@ -90,6 +134,7 @@
 		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
 
 	ti_32k_timer.counter = ti_32k_timer.base;
+	ti_32k_timer_module_init(np, ti_32k_timer.base);
 
 	/*
 	 * 32k sync Counter IP register offsets vary between the highlander
@@ -104,6 +149,8 @@
 	else
 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
 
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
 	if (ret) {
 		pr_err("32k_counter: can't register clocksource\n");
@@ -111,7 +158,6 @@
 	}
 
 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
-	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
 
 	return 0;
 }
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
new file mode 100644
index 0000000..1fccb45
--- /dev/null
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <linux/clk/clk-conf.h>
+
+#include <clocksource/timer-ti-dm.h>
+#include <dt-bindings/bus/ti-sysc.h>
+
+/* For type1, set SYSC_OMAP2_CLOCKACTIVITY for fck off on idle, l4 clock on */
+#define DMTIMER_TYPE1_ENABLE	((1 << 9) | (SYSC_IDLE_SMART << 3) | \
+				 SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_AUTOIDLE)
+#define DMTIMER_TYPE1_DISABLE	(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)
+#define DMTIMER_TYPE2_ENABLE	(SYSC_IDLE_SMART_WKUP << 2)
+#define DMTIMER_RESET_WAIT	100000
+
+#define DMTIMER_INST_DONT_CARE	~0U
+
+static int counter_32k;
+static u32 clocksource;
+static u32 clockevent;
+
+/*
+ * Subset of the timer registers we use. Note that the register offsets
+ * depend on the timer revision detected.
+ */
+struct dmtimer_systimer {
+	void __iomem *base;
+	u8 sysc;
+	u8 irq_stat;
+	u8 irq_ena;
+	u8 pend;
+	u8 load;
+	u8 counter;
+	u8 ctrl;
+	u8 wakeup;
+	u8 ifctrl;
+	struct clk *fck;
+	struct clk *ick;
+	unsigned long rate;
+};
+
+struct dmtimer_clockevent {
+	struct clock_event_device dev;
+	struct dmtimer_systimer t;
+	u32 period;
+};
+
+struct dmtimer_clocksource {
+	struct clocksource dev;
+	struct dmtimer_systimer t;
+	unsigned int loadval;
+};
+
+/* Assumes v1 ip if bits [31:16] are zero */
+static bool dmtimer_systimer_revision1(struct dmtimer_systimer *t)
+{
+	u32 tidr = readl_relaxed(t->base);
+
+	return !(tidr >> 16);
+}
+
+static void dmtimer_systimer_enable(struct dmtimer_systimer *t)
+{
+	u32 val;
+
+	if (dmtimer_systimer_revision1(t))
+		val = DMTIMER_TYPE1_ENABLE;
+	else
+		val = DMTIMER_TYPE2_ENABLE;
+
+	writel_relaxed(val, t->base + t->sysc);
+}
+
+static void dmtimer_systimer_disable(struct dmtimer_systimer *t)
+{
+	if (!dmtimer_systimer_revision1(t))
+		return;
+
+	writel_relaxed(DMTIMER_TYPE1_DISABLE, t->base + t->sysc);
+}
+
+static int __init dmtimer_systimer_type1_reset(struct dmtimer_systimer *t)
+{
+	void __iomem *syss = t->base + OMAP_TIMER_V1_SYS_STAT_OFFSET;
+	int ret;
+	u32 l;
+
+	dmtimer_systimer_enable(t);
+	writel_relaxed(BIT(1) | BIT(2), t->base + t->ifctrl);
+	ret = readl_poll_timeout_atomic(syss, l, l & BIT(0), 100,
+					DMTIMER_RESET_WAIT);
+
+	return ret;
+}
+
+/* Note we must use io_base instead of func_base for type2 OCP regs */
+static int __init dmtimer_systimer_type2_reset(struct dmtimer_systimer *t)
+{
+	void __iomem *sysc = t->base + t->sysc;
+	u32 l;
+
+	dmtimer_systimer_enable(t);
+	l = readl_relaxed(sysc);
+	l |= BIT(0);
+	writel_relaxed(l, sysc);
+
+	return readl_poll_timeout_atomic(sysc, l, !(l & BIT(0)), 100,
+					 DMTIMER_RESET_WAIT);
+}
+
+static int __init dmtimer_systimer_reset(struct dmtimer_systimer *t)
+{
+	int ret;
+
+	if (dmtimer_systimer_revision1(t))
+		ret = dmtimer_systimer_type1_reset(t);
+	else
+		ret = dmtimer_systimer_type2_reset(t);
+	if (ret < 0) {
+		pr_err("%s failed with %i\n", __func__, ret);
+
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id counter_match_table[] = {
+	{ .compatible = "ti,omap-counter32k" },
+	{ /* Sentinel */ },
+};
+
+/*
+ * Check if the SoC als has a usable working 32 KiHz counter. The 32 KiHz
+ * counter is handled by timer-ti-32k, but we need to detect it as it
+ * affects the preferred dmtimer system timer configuration. There is
+ * typically no use for a dmtimer clocksource if the 32 KiHz counter is
+ * present, except on am437x as described below.
+ */
+static void __init dmtimer_systimer_check_counter32k(void)
+{
+	struct device_node *np;
+
+	if (counter_32k)
+		return;
+
+	np = of_find_matching_node(NULL, counter_match_table);
+	if (!np) {
+		counter_32k = -ENODEV;
+
+		return;
+	}
+
+	if (of_device_is_available(np))
+		counter_32k = 1;
+	else
+		counter_32k = -ENODEV;
+
+	of_node_put(np);
+}
+
+static const struct of_device_id dmtimer_match_table[] = {
+	{ .compatible = "ti,omap2420-timer", },
+	{ .compatible = "ti,omap3430-timer", },
+	{ .compatible = "ti,omap4430-timer", },
+	{ .compatible = "ti,omap5430-timer", },
+	{ .compatible = "ti,am335x-timer", },
+	{ .compatible = "ti,am335x-timer-1ms", },
+	{ .compatible = "ti,dm814-timer", },
+	{ .compatible = "ti,dm816-timer", },
+	{ /* Sentinel */ },
+};
+
+/*
+ * Checks that system timers are configured to not reset and idle during
+ * the generic timer-ti-dm device driver probe. And that the system timer
+ * source clocks are properly configured. Also, let's not hog any DSP and
+ * PWM capable timers unnecessarily as system timers.
+ */
+static bool __init dmtimer_is_preferred(struct device_node *np)
+{
+	if (!of_device_is_available(np))
+		return false;
+
+	if (!of_property_read_bool(np->parent,
+				   "ti,no-reset-on-init"))
+		return false;
+
+	if (!of_property_read_bool(np->parent, "ti,no-idle"))
+		return false;
+
+	/* Secure gptimer12 is always clocked with a fixed source */
+	if (!of_property_read_bool(np, "ti,timer-secure")) {
+		if (!of_property_read_bool(np, "assigned-clocks"))
+			return false;
+
+		if (!of_property_read_bool(np, "assigned-clock-parents"))
+			return false;
+	}
+
+	if (of_property_read_bool(np, "ti,timer-dsp"))
+		return false;
+
+	if (of_property_read_bool(np, "ti,timer-pwm"))
+		return false;
+
+	return true;
+}
+
+/*
+ * Finds the first available usable always-on timer, and assigns it to either
+ * clockevent or clocksource depending if the counter_32k is available on the
+ * SoC or not.
+ *
+ * Some omap3 boards with unreliable oscillator must not use the counter_32k
+ * or dmtimer1 with 32 KiHz source. Additionally, the boards with unreliable
+ * oscillator should really set counter_32k as disabled, and delete dmtimer1
+ * ti,always-on property, but let's not count on it. For these quirky cases,
+ * we prefer using the always-on secure dmtimer12 with the internal 32 KiHz
+ * clock as the clocksource, and any available dmtimer as clockevent.
+ *
+ * For am437x, we are using am335x style dmtimer clocksource. It is unclear
+ * if this quirk handling is really needed, but let's change it separately
+ * based on testing as it might cause side effects.
+ */
+static void __init dmtimer_systimer_assign_alwon(void)
+{
+	struct device_node *np;
+	u32 pa = 0;
+	bool quirk_unreliable_oscillator = false;
+
+	/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
+	if (of_machine_is_compatible("ti,omap3-beagle-ab4")) {
+		quirk_unreliable_oscillator = true;
+		counter_32k = -ENODEV;
+	}
+
+	/* Quirk am437x using am335x style dmtimer clocksource */
+	if (of_machine_is_compatible("ti,am43"))
+		counter_32k = -ENODEV;
+
+	for_each_matching_node(np, dmtimer_match_table) {
+		if (!dmtimer_is_preferred(np))
+			continue;
+
+		if (of_property_read_bool(np, "ti,timer-alwon")) {
+			const __be32 *addr;
+
+			addr = of_get_address(np, 0, NULL, NULL);
+			pa = of_translate_address(np, addr);
+			if (pa) {
+				/* Quirky omap3 boards must use dmtimer12 */
+				if (quirk_unreliable_oscillator &&
+				    pa == 0x48318000)
+					continue;
+
+				of_node_put(np);
+				break;
+			}
+		}
+	}
+
+	/* Usually no need for dmtimer clocksource if we have counter32 */
+	if (counter_32k >= 0) {
+		clockevent = pa;
+		clocksource = 0;
+	} else {
+		clocksource = pa;
+		clockevent = DMTIMER_INST_DONT_CARE;
+	}
+}
+
+/* Finds the first usable dmtimer, used for the don't care case */
+static u32 __init dmtimer_systimer_find_first_available(void)
+{
+	struct device_node *np;
+	const __be32 *addr;
+	u32 pa = 0;
+
+	for_each_matching_node(np, dmtimer_match_table) {
+		if (!dmtimer_is_preferred(np))
+			continue;
+
+		addr = of_get_address(np, 0, NULL, NULL);
+		pa = of_translate_address(np, addr);
+		if (pa) {
+			if (pa == clocksource || pa == clockevent) {
+				pa = 0;
+				continue;
+			}
+
+			of_node_put(np);
+			break;
+		}
+	}
+
+	return pa;
+}
+
+/* Selects the best clocksource and clockevent to use */
+static void __init dmtimer_systimer_select_best(void)
+{
+	dmtimer_systimer_check_counter32k();
+	dmtimer_systimer_assign_alwon();
+
+	if (clockevent == DMTIMER_INST_DONT_CARE)
+		clockevent = dmtimer_systimer_find_first_available();
+
+	pr_debug("%s: counter_32k: %i clocksource: %08x clockevent: %08x\n",
+		 __func__, counter_32k, clocksource, clockevent);
+}
+
+/* Interface clocks are only available on some SoCs variants */
+static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t,
+					      struct device_node *np,
+					      const char *name,
+					      unsigned long *rate)
+{
+	struct clk *clock;
+	unsigned long r;
+	bool is_ick = false;
+	int error;
+
+	is_ick = !strncmp(name, "ick", 3);
+
+	clock = of_clk_get_by_name(np, name);
+	if ((PTR_ERR(clock) == -EINVAL) && is_ick)
+		return 0;
+	else if (IS_ERR(clock))
+		return PTR_ERR(clock);
+
+	error = clk_prepare_enable(clock);
+	if (error)
+		return error;
+
+	r = clk_get_rate(clock);
+	if (!r)
+		return -ENODEV;
+
+	if (is_ick)
+		t->ick = clock;
+	else
+		t->fck = clock;
+
+	*rate = r;
+
+	return 0;
+}
+
+static int __init dmtimer_systimer_setup(struct device_node *np,
+					 struct dmtimer_systimer *t)
+{
+	unsigned long rate;
+	u8 regbase;
+	int error;
+
+	if (!of_device_is_compatible(np->parent, "ti,sysc"))
+		return -EINVAL;
+
+	t->base = of_iomap(np, 0);
+	if (!t->base)
+		return -ENXIO;
+
+	/*
+	 * Enable optional assigned-clock-parents configured at the timer
+	 * node level. For regular device drivers, this is done automatically
+	 * by bus related code such as platform_drv_probe().
+	 */
+	error = of_clk_set_defaults(np, false);
+	if (error < 0)
+		pr_err("%s: clock source init failed: %i\n", __func__, error);
+
+	/* For ti-sysc, we have timer clocks at the parent module level */
+	error = dmtimer_systimer_init_clock(t, np->parent, "fck", &rate);
+	if (error)
+		goto err_unmap;
+
+	t->rate = rate;
+
+	error = dmtimer_systimer_init_clock(t, np->parent, "ick", &rate);
+	if (error)
+		goto err_unmap;
+
+	if (dmtimer_systimer_revision1(t)) {
+		t->irq_stat = OMAP_TIMER_V1_STAT_OFFSET;
+		t->irq_ena = OMAP_TIMER_V1_INT_EN_OFFSET;
+		t->pend = _OMAP_TIMER_WRITE_PEND_OFFSET;
+		regbase = 0;
+	} else {
+		t->irq_stat = OMAP_TIMER_V2_IRQSTATUS;
+		t->irq_ena = OMAP_TIMER_V2_IRQENABLE_SET;
+		regbase = OMAP_TIMER_V2_FUNC_OFFSET;
+		t->pend = regbase + _OMAP_TIMER_WRITE_PEND_OFFSET;
+	}
+
+	t->sysc = OMAP_TIMER_OCP_CFG_OFFSET;
+	t->load = regbase + _OMAP_TIMER_LOAD_OFFSET;
+	t->counter = regbase + _OMAP_TIMER_COUNTER_OFFSET;
+	t->ctrl = regbase + _OMAP_TIMER_CTRL_OFFSET;
+	t->wakeup = regbase + _OMAP_TIMER_WAKEUP_EN_OFFSET;
+	t->ifctrl = regbase + _OMAP_TIMER_IF_CTRL_OFFSET;
+
+	dmtimer_systimer_reset(t);
+	dmtimer_systimer_enable(t);
+	pr_debug("dmtimer rev %08x sysc %08x\n", readl_relaxed(t->base),
+		 readl_relaxed(t->base + t->sysc));
+
+	return 0;
+
+err_unmap:
+	iounmap(t->base);
+
+	return error;
+}
+
+/* Clockevent */
+static struct dmtimer_clockevent *
+to_dmtimer_clockevent(struct clock_event_device *clockevent)
+{
+	return container_of(clockevent, struct dmtimer_clockevent, dev);
+}
+
+static irqreturn_t dmtimer_clockevent_interrupt(int irq, void *data)
+{
+	struct dmtimer_clockevent *clkevt = data;
+	struct dmtimer_systimer *t = &clkevt->t;
+
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+	clkevt->dev.event_handler(&clkevt->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int dmtimer_set_next_event(unsigned long cycles,
+				  struct clock_event_device *evt)
+{
+	struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+	struct dmtimer_systimer *t = &clkevt->t;
+	void __iomem *pend = t->base + t->pend;
+
+	while (readl_relaxed(pend) & WP_TCRR)
+		cpu_relax();
+	writel_relaxed(0xffffffff - cycles, t->base + t->counter);
+
+	while (readl_relaxed(pend) & WP_TCLR)
+		cpu_relax();
+	writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
+
+	return 0;
+}
+
+static int dmtimer_clockevent_shutdown(struct clock_event_device *evt)
+{
+	struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+	struct dmtimer_systimer *t = &clkevt->t;
+	void __iomem *ctrl = t->base + t->ctrl;
+	u32 l;
+
+	l = readl_relaxed(ctrl);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~BIT(0);
+		writel_relaxed(l, ctrl);
+		/* Flush posted write */
+		l = readl_relaxed(ctrl);
+		/*  Wait for functional clock period x 3.5 */
+		udelay(3500000 / t->rate + 1);
+	}
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+
+	return 0;
+}
+
+static int dmtimer_set_periodic(struct clock_event_device *evt)
+{
+	struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+	struct dmtimer_systimer *t = &clkevt->t;
+	void __iomem *pend = t->base + t->pend;
+
+	dmtimer_clockevent_shutdown(evt);
+
+	/* Looks like we need to first set the load value separately */
+	while (readl_relaxed(pend) & WP_TLDR)
+		cpu_relax();
+	writel_relaxed(clkevt->period, t->base + t->load);
+
+	while (readl_relaxed(pend) & WP_TCRR)
+		cpu_relax();
+	writel_relaxed(clkevt->period, t->base + t->counter);
+
+	while (readl_relaxed(pend) & WP_TCLR)
+		cpu_relax();
+	writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+		       t->base + t->ctrl);
+
+	return 0;
+}
+
+static void omap_clockevent_idle(struct clock_event_device *evt)
+{
+	struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+	struct dmtimer_systimer *t = &clkevt->t;
+
+	dmtimer_systimer_disable(t);
+	clk_disable(t->fck);
+}
+
+static void omap_clockevent_unidle(struct clock_event_device *evt)
+{
+	struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+	struct dmtimer_systimer *t = &clkevt->t;
+	int error;
+
+	error = clk_enable(t->fck);
+	if (error)
+		pr_err("could not enable timer fck on resume: %i\n", error);
+
+	dmtimer_systimer_enable(t);
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+}
+
+static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
+					     struct device_node *np,
+					     unsigned int features,
+					     const struct cpumask *cpumask,
+					     const char *name,
+					     int rating)
+{
+	struct clock_event_device *dev;
+	struct dmtimer_systimer *t;
+	int error;
+
+	t = &clkevt->t;
+	dev = &clkevt->dev;
+
+	/*
+	 * We mostly use cpuidle_coupled with ARM local timers for runtime,
+	 * so there's probably no use for CLOCK_EVT_FEAT_DYNIRQ here.
+	 */
+	dev->features = features;
+	dev->rating = rating;
+	dev->set_next_event = dmtimer_set_next_event;
+	dev->set_state_shutdown = dmtimer_clockevent_shutdown;
+	dev->set_state_periodic = dmtimer_set_periodic;
+	dev->set_state_oneshot = dmtimer_clockevent_shutdown;
+	dev->set_state_oneshot_stopped = dmtimer_clockevent_shutdown;
+	dev->tick_resume = dmtimer_clockevent_shutdown;
+	dev->cpumask = cpumask;
+
+	dev->irq = irq_of_parse_and_map(np, 0);
+	if (!dev->irq)
+		return -ENXIO;
+
+	error = dmtimer_systimer_setup(np, &clkevt->t);
+	if (error)
+		return error;
+
+	clkevt->period = 0xffffffff - DIV_ROUND_CLOSEST(t->rate, HZ);
+
+	/*
+	 * For clock-event timers we never read the timer counter and
+	 * so we are not impacted by errata i103 and i767. Therefore,
+	 * we can safely ignore this errata for clock-event timers.
+	 */
+	writel_relaxed(OMAP_TIMER_CTRL_POSTED, t->base + t->ifctrl);
+
+	error = request_irq(dev->irq, dmtimer_clockevent_interrupt,
+			    IRQF_TIMER, name, clkevt);
+	if (error)
+		goto err_out_unmap;
+
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+
+	pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
+		name, of_find_property(np, "ti,timer-alwon", NULL) ?
+		"always-on " : "", t->rate, np->parent);
+
+	return 0;
+
+err_out_unmap:
+	iounmap(t->base);
+
+	return error;
+}
+
+static int __init dmtimer_clockevent_init(struct device_node *np)
+{
+	struct dmtimer_clockevent *clkevt;
+	int error;
+
+	clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+	if (!clkevt)
+		return -ENOMEM;
+
+	error = dmtimer_clkevt_init_common(clkevt, np,
+					   CLOCK_EVT_FEAT_PERIODIC |
+					   CLOCK_EVT_FEAT_ONESHOT,
+					   cpu_possible_mask, "clockevent",
+					   300);
+	if (error)
+		goto err_out_free;
+
+	clockevents_config_and_register(&clkevt->dev, clkevt->t.rate,
+					3, /* Timer internal resync latency */
+					0xffffffff);
+
+	if (of_machine_is_compatible("ti,am33xx") ||
+	    of_machine_is_compatible("ti,am43")) {
+		clkevt->dev.suspend = omap_clockevent_idle;
+		clkevt->dev.resume = omap_clockevent_unidle;
+	}
+
+	return 0;
+
+err_out_free:
+	kfree(clkevt);
+
+	return error;
+}
+
+/* Dmtimer as percpu timer. See dra7 ARM architected timer wrap erratum i940 */
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int __init dmtimer_percpu_timer_init(struct device_node *np, int cpu)
+{
+	struct dmtimer_clockevent *clkevt;
+	int error;
+
+	if (!cpu_possible(cpu))
+		return -EINVAL;
+
+	if (!of_property_read_bool(np->parent, "ti,no-reset-on-init") ||
+	    !of_property_read_bool(np->parent, "ti,no-idle"))
+		pr_warn("Incomplete dtb for percpu dmtimer %pOF\n", np->parent);
+
+	clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+
+	error = dmtimer_clkevt_init_common(clkevt, np, CLOCK_EVT_FEAT_ONESHOT,
+					   cpumask_of(cpu), "percpu-dmtimer",
+					   500);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+/* See TRM for timer internal resynch latency */
+static int omap_dmtimer_starting_cpu(unsigned int cpu)
+{
+	struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+	struct clock_event_device *dev = &clkevt->dev;
+	struct dmtimer_systimer *t = &clkevt->t;
+
+	clockevents_config_and_register(dev, t->rate, 3, ULONG_MAX);
+	irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+	return 0;
+}
+
+static int __init dmtimer_percpu_timer_startup(void)
+{
+	struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, 0);
+	struct dmtimer_systimer *t = &clkevt->t;
+
+	if (t->sysc) {
+		cpuhp_setup_state(CPUHP_AP_TI_GP_TIMER_STARTING,
+				  "clockevents/omap/gptimer:starting",
+				  omap_dmtimer_starting_cpu, NULL);
+	}
+
+	return 0;
+}
+subsys_initcall(dmtimer_percpu_timer_startup);
+
+static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
+{
+	struct device_node *arm_timer;
+
+	arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+	if (of_device_is_available(arm_timer)) {
+		pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+		return 0;
+	}
+
+	if (pa == 0x48034000)		/* dra7 dmtimer3 */
+		return dmtimer_percpu_timer_init(np, 0);
+	else if (pa == 0x48036000)	/* dra7 dmtimer4 */
+		return dmtimer_percpu_timer_init(np, 1);
+
+	return 0;
+}
+
+/* Clocksource */
+static struct dmtimer_clocksource *
+to_dmtimer_clocksource(struct clocksource *cs)
+{
+	return container_of(cs, struct dmtimer_clocksource, dev);
+}
+
+static u64 dmtimer_clocksource_read_cycles(struct clocksource *cs)
+{
+	struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+	struct dmtimer_systimer *t = &clksrc->t;
+
+	return (u64)readl_relaxed(t->base + t->counter);
+}
+
+static void __iomem *dmtimer_sched_clock_counter;
+
+static u64 notrace dmtimer_read_sched_clock(void)
+{
+	return readl_relaxed(dmtimer_sched_clock_counter);
+}
+
+static void dmtimer_clocksource_suspend(struct clocksource *cs)
+{
+	struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+	struct dmtimer_systimer *t = &clksrc->t;
+
+	clksrc->loadval = readl_relaxed(t->base + t->counter);
+	dmtimer_systimer_disable(t);
+	clk_disable(t->fck);
+}
+
+static void dmtimer_clocksource_resume(struct clocksource *cs)
+{
+	struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+	struct dmtimer_systimer *t = &clksrc->t;
+	int error;
+
+	error = clk_enable(t->fck);
+	if (error)
+		pr_err("could not enable timer fck on resume: %i\n", error);
+
+	dmtimer_systimer_enable(t);
+	writel_relaxed(clksrc->loadval, t->base + t->counter);
+	writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+		       t->base + t->ctrl);
+}
+
+static int __init dmtimer_clocksource_init(struct device_node *np)
+{
+	struct dmtimer_clocksource *clksrc;
+	struct dmtimer_systimer *t;
+	struct clocksource *dev;
+	int error;
+
+	clksrc = kzalloc(sizeof(*clksrc), GFP_KERNEL);
+	if (!clksrc)
+		return -ENOMEM;
+
+	dev = &clksrc->dev;
+	t = &clksrc->t;
+
+	error = dmtimer_systimer_setup(np, t);
+	if (error)
+		goto err_out_free;
+
+	dev->name = "dmtimer";
+	dev->rating = 300;
+	dev->read = dmtimer_clocksource_read_cycles;
+	dev->mask = CLOCKSOURCE_MASK(32);
+	dev->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* Unlike for clockevent, legacy code sets suspend only for am4 */
+	if (of_machine_is_compatible("ti,am43")) {
+		dev->suspend = dmtimer_clocksource_suspend;
+		dev->resume = dmtimer_clocksource_resume;
+	}
+
+	writel_relaxed(0, t->base + t->counter);
+	writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+		       t->base + t->ctrl);
+
+	pr_info("TI gptimer clocksource: %s%pOF\n",
+		of_find_property(np, "ti,timer-alwon", NULL) ?
+		"always-on " : "", np->parent);
+
+	if (!dmtimer_sched_clock_counter) {
+		dmtimer_sched_clock_counter = t->base + t->counter;
+		sched_clock_register(dmtimer_read_sched_clock, 32, t->rate);
+	}
+
+	if (clocksource_register_hz(dev, t->rate))
+		pr_err("Could not register clocksource %pOF\n", np);
+
+	return 0;
+
+err_out_free:
+	kfree(clksrc);
+
+	return -ENODEV;
+}
+
+/*
+ * To detect between a clocksource and clockevent, we assume the device tree
+ * has no interrupts configured for a clocksource timer.
+ */
+static int __init dmtimer_systimer_init(struct device_node *np)
+{
+	const __be32 *addr;
+	u32 pa;
+
+	/* One time init for the preferred timer configuration */
+	if (!clocksource && !clockevent)
+		dmtimer_systimer_select_best();
+
+	if (!clocksource && !clockevent) {
+		pr_err("%s: unable to detect system timers, update dtb?\n",
+		       __func__);
+
+		return -EINVAL;
+	}
+
+	addr = of_get_address(np, 0, NULL, NULL);
+	pa = of_translate_address(np, addr);
+	if (!pa)
+		return -EINVAL;
+
+	if (counter_32k <= 0 && clocksource == pa)
+		return dmtimer_clocksource_init(np);
+
+	if (clockevent == pa)
+		return dmtimer_clockevent_init(np);
+
+	if (of_machine_is_compatible("ti,dra7"))
+		return dmtimer_percpu_quirk_init(np, pa);
+
+	return 0;
+}
+
+TIMER_OF_DECLARE(systimer_omap2, "ti,omap2420-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap3, "ti,omap3430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap4, "ti,omap4430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap5, "ti,omap5430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_am33x, "ti,am335x-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_am3ms, "ti,am335x-timer-1ms", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_dm814, "ti,dm814-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_dm816, "ti,dm816-timer", dmtimer_systimer_init);
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 5394d9d..e5c631f 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1,9 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * linux/arch/arm/plat-omap/dmtimer.c
  *
  * OMAP Dual-Mode Timers
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
  *
@@ -15,28 +16,11 @@
  *
  * Copyright (C) 2009 Texas Instruments
  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/cpu_pm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/device.h>
@@ -94,6 +78,9 @@
 
 static void omap_timer_restore_context(struct omap_dm_timer *timer)
 {
+	__omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET,
+			      timer->context.ocp_cfg, 0);
+
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
 				timer->context.twer);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
@@ -109,6 +96,50 @@
 				timer->context.tclr);
 }
 
+static void omap_timer_save_context(struct omap_dm_timer *timer)
+{
+	timer->context.ocp_cfg =
+		__omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0);
+
+	timer->context.tclr =
+			omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	timer->context.twer =
+			omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG);
+	timer->context.tldr =
+			omap_dm_timer_read_reg(timer, OMAP_TIMER_LOAD_REG);
+	timer->context.tmar =
+			omap_dm_timer_read_reg(timer, OMAP_TIMER_MATCH_REG);
+	timer->context.tier = readl_relaxed(timer->irq_ena);
+	timer->context.tsicr =
+			omap_dm_timer_read_reg(timer, OMAP_TIMER_IF_CTRL_REG);
+}
+
+static int omap_timer_context_notifier(struct notifier_block *nb,
+				       unsigned long cmd, void *v)
+{
+	struct omap_dm_timer *timer;
+
+	timer = container_of(nb, struct omap_dm_timer, nb);
+
+	switch (cmd) {
+	case CPU_CLUSTER_PM_ENTER:
+		if ((timer->capability & OMAP_TIMER_ALWON) ||
+		    !atomic_read(&timer->enabled))
+			break;
+		omap_timer_save_context(timer);
+		break;
+	case CPU_CLUSTER_PM_ENTER_FAILED:
+	case CPU_CLUSTER_PM_EXIT:
+		if ((timer->capability & OMAP_TIMER_ALWON) ||
+		    !atomic_read(&timer->enabled))
+			break;
+		omap_timer_restore_context(timer);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 {
 	u32 l, timeout = 100000;
@@ -138,35 +169,6 @@
 	return 0;
 }
 
-static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
-{
-	int ret;
-	struct clk *parent;
-
-	/*
-	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
-	 * do not call clk_get() for these devices.
-	 */
-	if (!timer->fclk)
-		return -ENODEV;
-
-	parent = clk_get(&timer->pdev->dev, NULL);
-	if (IS_ERR(parent))
-		return -ENODEV;
-
-	/* Bail out if both clocks point to fck */
-	if (clk_is_match(parent, timer->fclk))
-		return 0;
-
-	ret = clk_set_parent(timer->fclk, parent);
-	if (ret < 0)
-		pr_err("%s: failed to set parent\n", __func__);
-
-	clk_put(parent);
-
-	return ret;
-}
-
 static int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
 	int ret;
@@ -225,21 +227,7 @@
 
 static void omap_dm_timer_enable(struct omap_dm_timer *timer)
 {
-	int c;
-
 	pm_runtime_get_sync(&timer->pdev->dev);
-
-	if (!(timer->capability & OMAP_TIMER_ALWON)) {
-		if (timer->get_context_loss_count) {
-			c = timer->get_context_loss_count(&timer->pdev->dev);
-			if (c != timer->ctx_loss_count) {
-				omap_timer_restore_context(timer);
-				timer->ctx_loss_count = c;
-			}
-		} else {
-			omap_timer_restore_context(timer);
-		}
-	}
 }
 
 static void omap_dm_timer_disable(struct omap_dm_timer *timer)
@@ -276,11 +264,7 @@
 	__omap_dm_timer_enable_posted(timer);
 	omap_dm_timer_disable(timer);
 
-	rc = omap_dm_timer_of_set_source(timer);
-	if (rc == -ENODEV)
-		return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
-
-	return rc;
+	return 0;
 }
 
 static inline u32 omap_dm_timer_reserved_systimer(int id)
@@ -508,7 +492,7 @@
 
 int omap_dm_timer_trigger(struct omap_dm_timer *timer)
 {
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+	if (unlikely(!timer || !atomic_read(&timer->enabled))) {
 		pr_err("%s: timer not available or enabled.\n", __func__);
 		return -EINVAL;
 	}
@@ -532,8 +516,6 @@
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
 
-	/* Save the context */
-	timer->context.tclr = l;
 	return 0;
 }
 
@@ -549,38 +531,19 @@
 
 	__omap_dm_timer_stop(timer, timer->posted, rate);
 
-	/*
-	 * Since the register values are computed and written within
-	 * __omap_dm_timer_stop, we need to use read to retrieve the
-	 * context.
-	 */
-	timer->context.tclr =
-			omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
 	omap_dm_timer_disable(timer);
 	return 0;
 }
 
-static int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+static int omap_dm_timer_set_load(struct omap_dm_timer *timer,
 				  unsigned int load)
 {
-	u32 l;
-
 	if (unlikely(!timer))
 		return -EINVAL;
 
 	omap_dm_timer_enable(timer);
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (autoreload)
-		l |= OMAP_TIMER_CTRL_AR;
-	else
-		l &= ~OMAP_TIMER_CTRL_AR;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
-	/* Save the context */
-	timer->context.tclr = l;
-	timer->context.tldr = load;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
@@ -602,15 +565,12 @@
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 
-	/* Save the context */
-	timer->context.tclr = l;
-	timer->context.tmar = match;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
 
 static int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
-				 int toggle, int trigger)
+				 int toggle, int trigger, int autoreload)
 {
 	u32 l;
 
@@ -620,20 +580,34 @@
 	omap_dm_timer_enable(timer);
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
 	l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
-	       OMAP_TIMER_CTRL_PT | (0x03 << 10));
+	       OMAP_TIMER_CTRL_PT | (0x03 << 10) | OMAP_TIMER_CTRL_AR);
 	if (def_on)
 		l |= OMAP_TIMER_CTRL_SCPWM;
 	if (toggle)
 		l |= OMAP_TIMER_CTRL_PT;
 	l |= trigger << 10;
+	if (autoreload)
+		l |= OMAP_TIMER_CTRL_AR;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 
-	/* Save the context */
-	timer->context.tclr = l;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
 
+static int omap_dm_timer_get_pwm_status(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	if (unlikely(!timer))
+		return -EINVAL;
+
+	omap_dm_timer_enable(timer);
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	omap_dm_timer_disable(timer);
+
+	return l;
+}
+
 static int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer,
 					int prescaler)
 {
@@ -651,8 +625,6 @@
 	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 
-	/* Save the context */
-	timer->context.tclr = l;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
@@ -666,9 +638,6 @@
 	omap_dm_timer_enable(timer);
 	__omap_dm_timer_int_enable(timer, value);
 
-	/* Save the context */
-	timer->context.tier = value;
-	timer->context.twer = value;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
@@ -696,9 +665,6 @@
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
 
-	/* Save the context */
-	timer->context.tier &= ~mask;
-	timer->context.twer &= ~mask;
 	omap_dm_timer_disable(timer);
 	return 0;
 }
@@ -707,7 +673,7 @@
 {
 	unsigned int l;
 
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+	if (unlikely(!timer || !atomic_read(&timer->enabled))) {
 		pr_err("%s: timer not available or enabled.\n", __func__);
 		return 0;
 	}
@@ -719,7 +685,7 @@
 
 static int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+	if (unlikely(!timer || !atomic_read(&timer->enabled)))
 		return -EINVAL;
 
 	__omap_dm_timer_write_status(timer, value);
@@ -729,7 +695,7 @@
 
 static unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+	if (unlikely(!timer || !atomic_read(&timer->enabled))) {
 		pr_err("%s: timer not iavailable or enabled.\n", __func__);
 		return 0;
 	}
@@ -739,7 +705,7 @@
 
 static int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+	if (unlikely(!timer || !atomic_read(&timer->enabled))) {
 		pr_err("%s: timer not available or enabled.\n", __func__);
 		return -EINVAL;
 	}
@@ -767,6 +733,37 @@
 	return 0;
 }
 
+static int __maybe_unused omap_dm_timer_runtime_suspend(struct device *dev)
+{
+	struct omap_dm_timer *timer = dev_get_drvdata(dev);
+
+	atomic_set(&timer->enabled, 0);
+
+	if (timer->capability & OMAP_TIMER_ALWON || !timer->func_base)
+		return 0;
+
+	omap_timer_save_context(timer);
+
+	return 0;
+}
+
+static int __maybe_unused omap_dm_timer_runtime_resume(struct device *dev)
+{
+	struct omap_dm_timer *timer = dev_get_drvdata(dev);
+
+	if (!(timer->capability & OMAP_TIMER_ALWON) && timer->func_base)
+		omap_timer_restore_context(timer);
+
+	atomic_set(&timer->enabled, 1);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_dm_timer_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_dm_timer_runtime_suspend,
+			   omap_dm_timer_runtime_resume, NULL)
+};
+
 static const struct of_device_id omap_timer_match[];
 
 /**
@@ -780,7 +777,6 @@
 {
 	unsigned long flags;
 	struct omap_dm_timer *timer;
-	struct resource *mem, *irq;
 	struct device *dev = &pdev->dev;
 	const struct dmtimer_platform_data *pdata;
 	int ret;
@@ -796,27 +792,21 @@
 		return -ENODEV;
 	}
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!irq)) {
-		dev_err(dev, "%s: no IRQ resource.\n", __func__);
-		return -ENODEV;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!mem)) {
-		dev_err(dev, "%s: no memory resource.\n", __func__);
-		return -ENODEV;
-	}
-
 	timer = devm_kzalloc(dev, sizeof(*timer), GFP_KERNEL);
 	if (!timer)
 		return  -ENOMEM;
 
+	timer->irq = platform_get_irq(pdev, 0);
+	if (timer->irq < 0)
+		return timer->irq;
+
 	timer->fclk = ERR_PTR(-ENODEV);
-	timer->io_base = devm_ioremap_resource(dev, mem);
+	timer->io_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(timer->io_base))
 		return PTR_ERR(timer->io_base);
 
+	platform_set_drvdata(pdev, timer);
+
 	if (dev->of_node) {
 		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
 			timer->capability |= OMAP_TIMER_ALWON;
@@ -830,13 +820,16 @@
 		timer->id = pdev->id;
 		timer->capability = pdata->timer_capability;
 		timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
-		timer->get_context_loss_count = pdata->get_context_loss_count;
+	}
+
+	if (!(timer->capability & OMAP_TIMER_ALWON)) {
+		timer->nb.notifier_call = omap_timer_context_notifier;
+		cpu_pm_register_notifier(&timer->nb);
 	}
 
 	if (pdata)
 		timer->errata = pdata->timer_errata;
 
-	timer->irq = irq->start;
 	timer->pdev = pdev;
 
 	pm_runtime_enable(dev);
@@ -885,6 +878,8 @@
 	list_for_each_entry(timer, &omap_timer_list, node)
 		if (!strcmp(dev_name(&timer->pdev->dev),
 			    dev_name(&pdev->dev))) {
+			if (!(timer->capability & OMAP_TIMER_ALWON))
+				cpu_pm_unregister_notifier(&timer->nb);
 			list_del(&timer->node);
 			ret = 0;
 			break;
@@ -913,6 +908,7 @@
 	.set_load = omap_dm_timer_set_load,
 	.set_match = omap_dm_timer_set_match,
 	.set_pwm = omap_dm_timer_set_pwm,
+	.get_pwm_status = omap_dm_timer_get_pwm_status,
 	.set_prescaler = omap_dm_timer_set_prescaler,
 	.read_counter = omap_dm_timer_read_counter,
 	.write_counter = omap_dm_timer_write_counter,
@@ -963,6 +959,7 @@
 	.driver = {
 		.name   = "omap_timer",
 		.of_match_table = of_match_ptr(omap_timer_match),
+		.pm = &omap_dm_timer_pm_ops,
 	},
 };
 
diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 32adc30..37cba8d 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -330,12 +330,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction u300_timer_irq = {
-	.name		= "U300 Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= u300_timer_interrupt,
-};
-
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
@@ -420,7 +414,8 @@
 		u300_timer_base + U300_TIMER_APP_RGPT1);
 
 	/* Set up the IRQ handler */
-	ret = setup_irq(irq, &u300_timer_irq);
+	ret = request_irq(irq, u300_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL);
 	if (ret)
 		return ret;
 
diff --git a/drivers/clocksource/timer-versatile.c b/drivers/clocksource/timer-versatile.c
index e4ebb65..f5d017b 100644
--- a/drivers/clocksource/timer-versatile.c
+++ b/drivers/clocksource/timer-versatile.c
@@ -6,6 +6,7 @@
 
 #include <linux/clocksource.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/sched_clock.h>
 
@@ -22,6 +23,8 @@
 {
 	void __iomem *base = of_iomap(node, 0);
 
+	of_node_clear_flag(node, OF_POPULATED);
+
 	if (!base)
 		return -ENXIO;
 
diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index fef0bb4..1a86a4e 100644
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -123,19 +123,13 @@
 	.rating		= 300,
 };
 
-static struct irqaction pit_timer_irq = {
-	.name		= "VF pit timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pit_timer_interrupt,
-	.dev_id		= &clockevent_pit,
-};
-
 static int __init pit_clockevent_init(unsigned long rate, int irq)
 {
 	__raw_writel(0, clkevt_base + PITTCTRL);
 	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 
-	BUG_ON(setup_irq(irq, &pit_timer_irq));
+	BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			   "VF pit timer", &clockevent_pit));
 
 	clockevent_pit.cpumask = cpumask_of(0);
 	clockevent_pit.irq = irq;
diff --git a/drivers/clocksource/timer-vt8500.c b/drivers/clocksource/timer-vt8500.c
index bb424bc..a469b1b 100644
--- a/drivers/clocksource/timer-vt8500.c
+++ b/drivers/clocksource/timer-vt8500.c
@@ -101,13 +101,6 @@
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq = {
-	.name    = "vt8500_timer",
-	.flags   = IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = vt8500_timer_interrupt,
-	.dev_id  = &clockevent,
-};
-
 static int __init vt8500_timer_init(struct device_node *np)
 {
 	int timer_irq, ret;
@@ -139,7 +132,9 @@
 
 	clockevent.cpumask = cpumask_of(0);
 
-	ret = setup_irq(timer_irq, &irq);
+	ret = request_irq(timer_irq, vt8500_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "vt8500_timer",
+			  &clockevent);
 	if (ret) {
 		pr_err("%s: setup_irq failed for %s\n", __func__,
 							clockevent.name);
diff --git a/drivers/clocksource/timer-zevio.c b/drivers/clocksource/timer-zevio.c
index c004156..ecaa356 100644
--- a/drivers/clocksource/timer-zevio.c
+++ b/drivers/clocksource/timer-zevio.c
@@ -53,7 +53,6 @@
 
 	struct clk *clk;
 	struct clock_event_device clkevt;
-	struct irqaction clkevt_irq;
 
 	char clocksource_name[64];
 	char clockevent_name[64];
@@ -172,12 +171,12 @@
 		/* Interrupt to occur when timer value matches 0 */
 		writel(0, timer->base + IO_MATCH(TIMER_MATCH));
 
-		timer->clkevt_irq.name		= timer->clockevent_name;
-		timer->clkevt_irq.handler	= zevio_timer_interrupt;
-		timer->clkevt_irq.dev_id	= timer;
-		timer->clkevt_irq.flags		= IRQF_TIMER | IRQF_IRQPOLL;
-
-		setup_irq(irqnr, &timer->clkevt_irq);
+		if (request_irq(irqnr, zevio_timer_interrupt,
+				IRQF_TIMER | IRQF_IRQPOLL,
+				timer->clockevent_name, timer)) {
+			pr_err("%s: request_irq() failed\n",
+			       timer->clockevent_name);
+		}
 
 		clockevents_config_and_register(&timer->clkevt,
 				clk_get_rate(timer->clk), 0x0001, 0xffff);