Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index a7b134a..9d78cc2 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -1,16 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
* JZ4740 platform PWM support
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * Limitations:
+ * - The .apply callback doesn't complete the currently running period before
+ * reconfiguring the hardware.
+ * - Each period starts with the inactive part.
*/
#include <linux/clk.h>
@@ -72,7 +68,15 @@
{
uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
- /* Disable PWM output.
+ /*
+ * Set duty > period. This trick allows the TCU channels in TCU2 mode to
+ * properly return to their init level.
+ */
+ jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
+ jz4740_timer_set_period(pwm->hwpwm, 0x0);
+
+ /*
+ * Disable PWM output.
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
@@ -83,17 +87,16 @@
jz4740_timer_disable(pwm->hwpwm);
}
-static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
unsigned long long tmp;
unsigned long period, duty;
unsigned int prescaler = 0;
uint16_t ctrl;
- bool is_enabled;
- tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns;
+ tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
do_div(tmp, 1000000000);
period = tmp;
@@ -105,16 +108,14 @@
if (prescaler == 6)
return -EINVAL;
- tmp = (unsigned long long)period * duty_ns;
- do_div(tmp, period_ns);
+ tmp = (unsigned long long)period * state->duty_cycle;
+ do_div(tmp, state->period);
duty = period - tmp;
if (duty >= period)
duty = period - 1;
- is_enabled = jz4740_timer_is_enabled(pwm->hwpwm);
- if (is_enabled)
- jz4740_pwm_disable(chip, pwm);
+ jz4740_pwm_disable(chip, pwm);
jz4740_timer_set_count(pwm->hwpwm, 0);
jz4740_timer_set_duty(pwm->hwpwm, duty);
@@ -125,18 +126,7 @@
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
- if (is_enabled)
- jz4740_pwm_enable(chip, pwm);
-
- return 0;
-}
-
-static int jz4740_pwm_set_polarity(struct pwm_chip *chip,
- struct pwm_device *pwm, enum pwm_polarity polarity)
-{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
-
- switch (polarity) {
+ switch (state->polarity) {
case PWM_POLARITY_NORMAL:
ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
break;
@@ -146,16 +136,17 @@
}
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+
+ if (state->enabled)
+ jz4740_pwm_enable(chip, pwm);
+
return 0;
}
static const struct pwm_ops jz4740_pwm_ops = {
.request = jz4740_pwm_request,
.free = jz4740_pwm_free,
- .config = jz4740_pwm_config,
- .set_polarity = jz4740_pwm_set_polarity,
- .enable = jz4740_pwm_enable,
- .disable = jz4740_pwm_disable,
+ .apply = jz4740_pwm_apply,
.owner = THIS_MODULE,
};
@@ -193,8 +184,6 @@
#ifdef CONFIG_OF
static const struct of_device_id jz4740_pwm_dt_ids[] = {
{ .compatible = "ingenic,jz4740-pwm", },
- { .compatible = "ingenic,jz4770-pwm", },
- { .compatible = "ingenic,jz4780-pwm", },
{},
};
MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids);