diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 44097a3..1988de1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 config LEDS_GPIO_REGISTER
 	bool
 	help
@@ -23,8 +24,8 @@
 	tristate "LED Flash Class Support"
 	depends on LEDS_CLASS
 	help
-	  This option enables the flash led sysfs class in /sys/class/leds.
-	  It wrapps LED Class and adds flash LEDs specific sysfs attributes
+	  This option enables the flash LED sysfs class in /sys/class/leds.
+	  It wraps LED Class and adds flash LEDs specific sysfs attributes
 	  and kernel internal API to it. You'll need this to provide support
 	  for the flash related features of a LED device. It can be built
 	  as a module.
@@ -56,16 +57,29 @@
 	depends on OF
 	depends on PINCTRL
 	help
-	 This option enables support for the LEDs on the AAT1290.
+	  This option enables support for the LEDs on the AAT1290.
+
+config LEDS_AN30259A
+	tristate "LED support for Panasonic AN30259A"
+	depends on LEDS_CLASS && I2C && OF
+	help
+	  This option enables support for the AN30259A 3-channel
+	  LED driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called leds-an30259a.
 
 config LEDS_APU
 	tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
 	depends on LEDS_CLASS
 	depends on X86 && DMI
 	help
-	  This driver makes the PC Engines APU/APU2/APU3 front panel LEDs
+	  This driver makes the PC Engines APU1 front panel LEDs
 	  accessible from userspace programs through the LED subsystem.
 
+	  If you're looking for APU2/3, use the pcengines-apu2 driver.
+	  (symbol CONFIG_PCENGINES_APU2)
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-apu.
 
@@ -128,6 +142,16 @@
 	  controlled manually or using PWM input or using ambient
 	  light automatically.
 
+config LEDS_LM3532
+	tristate "LCD Backlight driver for LM3532"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for the LCD backlight using
+	  LM3532 ambient light sensor chip. This ALS chip can be
+	  controlled manually or using PWM input or using ambient
+	  light automatically.
+
 config LEDS_LM3533
 	tristate "LED support for LM3533"
 	depends on LEDS_CLASS
@@ -403,13 +427,13 @@
 
 	  This module can drive the mail LED for the following notebooks:
 
-	  	Clevo D400P
-	  	Clevo D410J
-	  	Clevo D410V
-	  	Clevo D400V/D470V (not tested, but might work)
-	  	Clevo M540N
-	  	Clevo M5x0N (not tested, but might work)
-	  	Positivo Mobile (Clevo M5x0V)
+	        Clevo D400P
+	        Clevo D410J
+	        Clevo D410V
+	        Clevo D400V/D470V (not tested, but might work)
+	        Clevo M540N
+	        Clevo M5x0N (not tested, but might work)
+	        Positivo Mobile (Clevo M5x0V)
 
 	  If your model is not listed here you can try the "nodetect"
 	  module parameter.
@@ -452,7 +476,7 @@
 	depends on MFD_WM831X
 	help
 	  This option enables support for the status LEDs of the WM831x
-          series of PMICs.
+	  series of PMICs.
 
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
@@ -523,6 +547,7 @@
 	tristate "LED driver for LT3593 controllers"
 	depends on LEDS_CLASS
 	depends on GPIOLIB || COMPILE_TEST
+	depends on OF
 	help
 	  This option enables support for LEDs driven by a Linear Technology
 	  LT3593 controller. This controller uses a special one-wire pulse
@@ -565,6 +590,7 @@
 	tristate "LED support for Big Network series LEDs"
 	depends on LEDS_CLASS
 	depends on MACH_KIRKWOOD
+	depends on OF_GPIO
 	default y
 	help
 	  This option enables support for LEDs found on the LaCie 2Big
@@ -598,6 +624,12 @@
 	  This option enables support for Texas Instruments TLC59108
 	  and TLC59116 LED controllers.
 
+config LEDS_MAX77650
+	tristate "LED support for Maxim MAX77650 PMIC"
+	depends on LEDS_CLASS && MFD_MAX77650
+	help
+	  LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
+
 config LEDS_MAX77693
 	tristate "LED support for MAX77693 Flash"
 	depends on LEDS_CLASS_FLASH
@@ -756,6 +788,41 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-nic78bx.
 
+config LEDS_SPI_BYTE
+	tristate "LED support for SPI LED controller with a single byte"
+	depends on LEDS_CLASS
+	depends on SPI
+	depends on OF
+	help
+	  This option enables support for LED controller which use a single byte
+	  for controlling the brightness. Currently the following controller is
+	  supported: Ubiquiti airCube ISP microcontroller based LED controller.
+
+config LEDS_TI_LMU_COMMON
+	tristate "LED driver for TI LMU"
+	depends on LEDS_CLASS
+	depends on REGMAP
+	help
+	  Say Y to enable the LED driver for TI LMU devices.
+	  This supports common features between the TI LM3532, LM3631, LM3632,
+	  LM3633, LM3695 and LM3697.
+
+config LEDS_LM3697
+	tristate "LED driver for LM3697"
+	depends on LEDS_TI_LMU_COMMON
+	depends on I2C && OF
+	help
+	  Say Y to enable the LM3697 LED driver for TI LMU devices.
+	  This supports the LED device LM3697.
+
+config LEDS_LM36274
+	tristate "LED driver for LM36274"
+	depends on LEDS_TI_LMU_COMMON
+	depends on MFD_TI_LMU
+	help
+	  Say Y to enable the LM36274 LED driver for TI LMU devices.
+	  This supports the LED device LM36274.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 420b5d2..41fb073 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -11,12 +11,14 @@
 obj-$(CONFIG_LEDS_AAT1290)		+= leds-aat1290.o
 obj-$(CONFIG_LEDS_APU)			+= leds-apu.o
 obj-$(CONFIG_LEDS_AS3645A)		+= leds-as3645a.o
+obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
 obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
 obj-$(CONFIG_LEDS_CPCAP)		+= leds-cpcap.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
+obj-$(CONFIG_LEDS_LM3532)		+= leds-lm3532.o
 obj-$(CONFIG_LEDS_LM3533)		+= leds-lm3533.o
 obj-$(CONFIG_LEDS_LM3642)		+= leds-lm3642.o
 obj-$(CONFIG_LEDS_MIKROTIK_RB532)	+= leds-rb532.o
@@ -60,6 +62,7 @@
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77650)		+= leds-max77650.o
 obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
@@ -74,10 +77,14 @@
 obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
 obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
 obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
+obj-$(CONFIG_LEDS_SPI_BYTE)		+= leds-spi-byte.o
 obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
 obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
 obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
+obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= leds-ti-lmu-common.o
+obj-$(CONFIG_LEDS_LM3697)		+= leds-lm3697.o
+obj-$(CONFIG_LEDS_LM36274)		+= leds-lm36274.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
diff --git a/drivers/leds/led-class-flash.c b/drivers/leds/led-class-flash.c
index cf39827..60c3de5 100644
--- a/drivers/leds/led-class-flash.c
+++ b/drivers/leds/led-class-flash.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Flash class interface
  *
  * Copyright (C) 2015 Samsung Electronics Co., Ltd.
  * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/device.h>
@@ -285,8 +282,9 @@
 	led_cdev->groups = flash_groups;
 }
 
-int led_classdev_flash_register(struct device *parent,
-				struct led_classdev_flash *fled_cdev)
+int led_classdev_flash_register_ext(struct device *parent,
+				    struct led_classdev_flash *fled_cdev,
+				    struct led_init_data *init_data)
 {
 	struct led_classdev *led_cdev;
 	const struct led_flash_ops *ops;
@@ -312,13 +310,13 @@
 	}
 
 	/* Register led class device */
-	ret = led_classdev_register(parent, led_cdev);
+	ret = led_classdev_register_ext(parent, led_cdev, init_data);
 	if (ret < 0)
 		return ret;
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(led_classdev_flash_register);
+EXPORT_SYMBOL_GPL(led_classdev_flash_register_ext);
 
 void led_classdev_flash_unregister(struct led_classdev_flash *fled_cdev)
 {
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 3c7e348..647b126 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Class Core
  *
  * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
  * Copyright (C) 2005-2007 Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/ctype.h>
@@ -17,6 +14,7 @@
 #include <linux/leds.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
@@ -57,6 +55,7 @@
 	if (state == LED_OFF)
 		led_trigger_remove(led_cdev);
 	led_set_brightness(led_cdev, state);
+	flush_work(&led_cdev->set_brightness_work);
 
 	ret = size;
 unlock:
@@ -215,13 +214,6 @@
 
 static SIMPLE_DEV_PM_OPS(leds_class_dev_pm_ops, led_suspend, led_resume);
 
-static int match_name(struct device *dev, const void *data)
-{
-	if (!dev_name(dev))
-		return 0;
-	return !strcmp(dev_name(dev), (char *)data);
-}
-
 static int led_classdev_next_name(const char *init_name, char *name,
 				  size_t len)
 {
@@ -232,7 +224,7 @@
 	strlcpy(name, init_name, len);
 
 	while ((ret < len) &&
-	       (dev = class_find_device(leds_class, NULL, name, match_name))) {
+	       (dev = class_find_device_by_name(leds_class, name))) {
 		put_device(dev);
 		ret = snprintf(name, len, "%s_%u", init_name, ++i);
 	}
@@ -244,31 +236,48 @@
 }
 
 /**
- * of_led_classdev_register - register a new object of led_classdev class.
+ * led_classdev_register_ext - register a new object of led_classdev class
+ *			       with init data.
  *
  * @parent: parent of LED device
  * @led_cdev: the led_classdev structure for this device.
- * @np: DT node describing this LED
+ * @init_data: LED class device initialization data
  */
-int of_led_classdev_register(struct device *parent, struct device_node *np,
-			    struct led_classdev *led_cdev)
+int led_classdev_register_ext(struct device *parent,
+			      struct led_classdev *led_cdev,
+			      struct led_init_data *init_data)
 {
-	char name[LED_MAX_NAME_SIZE];
+	char composed_name[LED_MAX_NAME_SIZE];
+	char final_name[LED_MAX_NAME_SIZE];
+	const char *proposed_name = composed_name;
 	int ret;
 
-	ret = led_classdev_next_name(led_cdev->name, name, sizeof(name));
+	if (init_data) {
+		if (init_data->devname_mandatory && !init_data->devicename) {
+			dev_err(parent, "Mandatory device name is missing");
+			return -EINVAL;
+		}
+		ret = led_compose_name(parent, init_data, composed_name);
+		if (ret < 0)
+			return ret;
+	} else {
+		proposed_name = led_cdev->name;
+	}
+
+	ret = led_classdev_next_name(proposed_name, final_name, sizeof(final_name));
 	if (ret < 0)
 		return ret;
 
 	mutex_init(&led_cdev->led_access);
 	mutex_lock(&led_cdev->led_access);
 	led_cdev->dev = device_create_with_groups(leds_class, parent, 0,
-				led_cdev, led_cdev->groups, "%s", name);
+				led_cdev, led_cdev->groups, "%s", final_name);
 	if (IS_ERR(led_cdev->dev)) {
 		mutex_unlock(&led_cdev->led_access);
 		return PTR_ERR(led_cdev->dev);
 	}
-	led_cdev->dev->of_node = np;
+	if (init_data && init_data->fwnode)
+		led_cdev->dev->fwnode = init_data->fwnode;
 
 	if (ret)
 		dev_warn(parent, "Led %s renamed to %s due to name collision",
@@ -278,6 +287,7 @@
 		ret = led_add_brightness_hw_changed(led_cdev);
 		if (ret) {
 			device_unregister(led_cdev->dev);
+			led_cdev->dev = NULL;
 			mutex_unlock(&led_cdev->led_access);
 			return ret;
 		}
@@ -313,7 +323,7 @@
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(of_led_classdev_register);
+EXPORT_SYMBOL_GPL(led_classdev_register_ext);
 
 /**
  * led_classdev_unregister - unregisters a object of led_properties class.
@@ -323,6 +333,9 @@
  */
 void led_classdev_unregister(struct led_classdev *led_cdev)
 {
+	if (IS_ERR_OR_NULL(led_cdev->dev))
+		return;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 	down_write(&led_cdev->trigger_lock);
 	if (led_cdev->trigger)
@@ -358,14 +371,15 @@
 }
 
 /**
- * devm_of_led_classdev_register - resource managed led_classdev_register()
+ * devm_led_classdev_register_ext - resource managed led_classdev_register_ext()
  *
  * @parent: parent of LED device
  * @led_cdev: the led_classdev structure for this device.
+ * @init_data: LED class device initialization data
  */
-int devm_of_led_classdev_register(struct device *parent,
-				  struct device_node *np,
-				  struct led_classdev *led_cdev)
+int devm_led_classdev_register_ext(struct device *parent,
+				   struct led_classdev *led_cdev,
+				   struct led_init_data *init_data)
 {
 	struct led_classdev **dr;
 	int rc;
@@ -374,7 +388,7 @@
 	if (!dr)
 		return -ENOMEM;
 
-	rc = of_led_classdev_register(parent, np, led_cdev);
+	rc = led_classdev_register_ext(parent, led_cdev, init_data);
 	if (rc) {
 		devres_free(dr);
 		return rc;
@@ -385,7 +399,7 @@
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(devm_of_led_classdev_register);
+EXPORT_SYMBOL_GPL(devm_led_classdev_register_ext);
 
 static int devm_led_classdev_match(struct device *dev, void *res, void *data)
 {
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index ede4fa0..f1f718d 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Class Core
  *
  * Copyright 2005-2006 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -16,7 +12,11 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/property.h>
 #include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
 #include "leds.h"
 
 DECLARE_RWSEM(leds_list_lock);
@@ -25,6 +25,18 @@
 LIST_HEAD(leds_list);
 EXPORT_SYMBOL_GPL(leds_list);
 
+const char * const led_colors[LED_COLOR_ID_MAX] = {
+	[LED_COLOR_ID_WHITE] = "white",
+	[LED_COLOR_ID_RED] = "red",
+	[LED_COLOR_ID_GREEN] = "green",
+	[LED_COLOR_ID_BLUE] = "blue",
+	[LED_COLOR_ID_AMBER] = "amber",
+	[LED_COLOR_ID_VIOLET] = "violet",
+	[LED_COLOR_ID_YELLOW] = "yellow",
+	[LED_COLOR_ID_IR] = "ir",
+};
+EXPORT_SYMBOL_GPL(led_colors);
+
 static int __led_set_brightness(struct led_classdev *led_cdev,
 				enum led_brightness value)
 {
@@ -310,6 +322,31 @@
 }
 EXPORT_SYMBOL_GPL(led_update_brightness);
 
+u32 *led_get_default_pattern(struct led_classdev *led_cdev, unsigned int *size)
+{
+	struct fwnode_handle *fwnode = led_cdev->dev->fwnode;
+	u32 *pattern;
+	int count;
+
+	count = fwnode_property_count_u32(fwnode, "led-pattern");
+	if (count < 0)
+		return NULL;
+
+	pattern = kcalloc(count, sizeof(*pattern), GFP_KERNEL);
+	if (!pattern)
+		return NULL;
+
+	if (fwnode_property_read_u32_array(fwnode, "led-pattern", pattern, count)) {
+		kfree(pattern);
+		return NULL;
+	}
+
+	*size = count;
+
+	return pattern;
+}
+EXPORT_SYMBOL_GPL(led_get_default_pattern);
+
 /* Caller must ensure led_cdev->led_access held */
 void led_sysfs_disable(struct led_classdev *led_cdev)
 {
@@ -327,3 +364,116 @@
 	led_cdev->flags &= ~LED_SYSFS_DISABLE;
 }
 EXPORT_SYMBOL_GPL(led_sysfs_enable);
+
+static void led_parse_fwnode_props(struct device *dev,
+				   struct fwnode_handle *fwnode,
+				   struct led_properties *props)
+{
+	int ret;
+
+	if (!fwnode)
+		return;
+
+	if (fwnode_property_present(fwnode, "label")) {
+		ret = fwnode_property_read_string(fwnode, "label", &props->label);
+		if (ret)
+			dev_err(dev, "Error parsing 'label' property (%d)\n", ret);
+		return;
+	}
+
+	if (fwnode_property_present(fwnode, "color")) {
+		ret = fwnode_property_read_u32(fwnode, "color", &props->color);
+		if (ret)
+			dev_err(dev, "Error parsing 'color' property (%d)\n", ret);
+		else if (props->color >= LED_COLOR_ID_MAX)
+			dev_err(dev, "LED color identifier out of range\n");
+		else
+			props->color_present = true;
+	}
+
+
+	if (!fwnode_property_present(fwnode, "function"))
+		return;
+
+	ret = fwnode_property_read_string(fwnode, "function", &props->function);
+	if (ret) {
+		dev_err(dev,
+			"Error parsing 'function' property (%d)\n",
+			ret);
+	}
+
+	if (!fwnode_property_present(fwnode, "function-enumerator"))
+		return;
+
+	ret = fwnode_property_read_u32(fwnode, "function-enumerator",
+				       &props->func_enum);
+	if (ret) {
+		dev_err(dev,
+			"Error parsing 'function-enumerator' property (%d)\n",
+			ret);
+	} else {
+		props->func_enum_present = true;
+	}
+}
+
+int led_compose_name(struct device *dev, struct led_init_data *init_data,
+		     char *led_classdev_name)
+{
+	struct led_properties props = {};
+	struct fwnode_handle *fwnode = init_data->fwnode;
+	const char *devicename = init_data->devicename;
+
+	if (!led_classdev_name)
+		return -EINVAL;
+
+	led_parse_fwnode_props(dev, fwnode, &props);
+
+	if (props.label) {
+		/*
+		 * If init_data.devicename is NULL, then it indicates that
+		 * DT label should be used as-is for LED class device name.
+		 * Otherwise the label is prepended with devicename to compose
+		 * the final LED class device name.
+		 */
+		if (!devicename) {
+			strscpy(led_classdev_name, props.label,
+				LED_MAX_NAME_SIZE);
+		} else {
+			snprintf(led_classdev_name, LED_MAX_NAME_SIZE, "%s:%s",
+				 devicename, props.label);
+		}
+	} else if (props.function || props.color_present) {
+		char tmp_buf[LED_MAX_NAME_SIZE];
+
+		if (props.func_enum_present) {
+			snprintf(tmp_buf, LED_MAX_NAME_SIZE, "%s:%s-%d",
+				 props.color_present ? led_colors[props.color] : "",
+				 props.function ?: "", props.func_enum);
+		} else {
+			snprintf(tmp_buf, LED_MAX_NAME_SIZE, "%s:%s",
+				 props.color_present ? led_colors[props.color] : "",
+				 props.function ?: "");
+		}
+		if (init_data->devname_mandatory) {
+			snprintf(led_classdev_name, LED_MAX_NAME_SIZE, "%s:%s",
+				 devicename, tmp_buf);
+		} else {
+			strscpy(led_classdev_name, tmp_buf, LED_MAX_NAME_SIZE);
+
+		}
+	} else if (init_data->default_label) {
+		if (!devicename) {
+			dev_err(dev, "Legacy LED naming requires devicename segment");
+			return -EINVAL;
+		}
+		snprintf(led_classdev_name, LED_MAX_NAME_SIZE, "%s:%s",
+			 devicename, init_data->default_label);
+	} else if (is_of_node(fwnode)) {
+		strscpy(led_classdev_name, to_of_node(fwnode)->name,
+			LED_MAX_NAME_SIZE);
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(led_compose_name);
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 17d73db..23963e5 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Triggers Core
  *
  * Copyright 2005-2007 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/export.h>
@@ -171,12 +167,13 @@
 		trig->deactivate(led_cdev);
 err_activate:
 
-	led_cdev->trigger = NULL;
-	led_cdev->trigger_data = NULL;
 	write_lock_irqsave(&led_cdev->trigger->leddev_list_lock, flags);
 	list_del(&led_cdev->trig_list);
 	write_unlock_irqrestore(&led_cdev->trigger->leddev_list_lock, flags);
+	led_cdev->trigger = NULL;
+	led_cdev->trigger_data = NULL;
 	led_set_brightness(led_cdev, LED_OFF);
+	kfree(event);
 
 	return ret;
 }
@@ -200,8 +197,11 @@
 	down_read(&triggers_list_lock);
 	down_write(&led_cdev->trigger_lock);
 	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (!strcmp(led_cdev->default_trigger, trig->name))
+		if (!strcmp(led_cdev->default_trigger, trig->name)) {
+			led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
 			led_trigger_set(led_cdev, trig);
+			break;
+		}
 	}
 	up_write(&led_cdev->trigger_lock);
 	up_read(&triggers_list_lock);
@@ -248,8 +248,10 @@
 	list_for_each_entry(led_cdev, &leds_list, node) {
 		down_write(&led_cdev->trigger_lock);
 		if (!led_cdev->trigger && led_cdev->default_trigger &&
-			    !strcmp(led_cdev->default_trigger, trig->name))
+			    !strcmp(led_cdev->default_trigger, trig->name)) {
+			led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
 			led_trigger_set(led_cdev, trig);
+		}
 		up_write(&led_cdev->trigger_lock);
 	}
 	up_read(&leds_list_lock);
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 77a104d..b3044c9 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED driver for Marvell 88PM860x
  *
  * Copyright (C) 2009 Marvell International Ltd.
  *	Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -130,7 +126,7 @@
 		return -ENODEV;
 	}
 	for_each_child_of_node(nproot, np) {
-		if (!of_node_cmp(np->name, data->name)) {
+		if (of_node_name_eq(np, data->name)) {
 			of_property_read_u32(np, "marvell,88pm860x-iset",
 					     &iset);
 			data->iset = PM8606_LED_CURRENT(iset);
diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c
index 43bd8a4..5a0fe7b 100644
--- a/drivers/leds/leds-aat1290.c
+++ b/drivers/leds/leds-aat1290.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *	LED Flash class driver for the AAT1290
  *	1.5A Step-Up Current Regulator for Flash LEDs
  *
  *	Copyright (C) 2015, Samsung Electronics Co., Ltd.
  *	Author: Jacek Anaszewski <j.anaszewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/delay.h>
@@ -45,6 +42,8 @@
 #define AAT1290_FLASH_TM_NUM_LEVELS	16
 #define AAT1290_MM_CURRENT_SCALE_SIZE	15
 
+#define AAT1290_NAME			"aat1290"
+
 
 struct aat1290_led_config_data {
 	/* maximum LED current in movie mode */
@@ -78,7 +77,6 @@
 	int *mm_current_scale;
 	/* device mode */
 	bool movie_mode;
-
 	/* brightness cache */
 	unsigned int torch_brightness;
 };
@@ -218,7 +216,6 @@
 			struct aat1290_led_config_data *cfg,
 			struct device_node **sub_node)
 {
-	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
 	struct device *dev = &led->pdev->dev;
 	struct device_node *child_node;
 #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
@@ -257,9 +254,6 @@
 		return -EINVAL;
 	}
 
-	led_cdev->name = of_get_property(child_node, "label", NULL) ? :
-						child_node->name;
-
 	ret = of_property_read_u32(child_node, "led-max-microamp",
 				&cfg->max_mm_current);
 	/*
@@ -431,7 +425,7 @@
 	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
 	struct led_flash_setting *s;
 
-	strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name,
+	strlcpy(v4l2_sd_cfg->dev_name, led_cdev->dev->kobj.name,
 		sizeof(v4l2_sd_cfg->dev_name));
 
 	s = &v4l2_sd_cfg->intensity;
@@ -469,6 +463,7 @@
 	struct aat1290_led *led;
 	struct led_classdev *led_cdev;
 	struct led_classdev_flash *fled_cdev;
+	struct led_init_data init_data = {};
 	struct aat1290_led_config_data led_cfg = {};
 	struct v4l2_flash_config v4l2_sd_cfg = {};
 	int ret;
@@ -497,8 +492,12 @@
 
 	aat1290_init_flash_timeout(led, &led_cfg);
 
+	init_data.fwnode = of_fwnode_handle(sub_node);
+	init_data.devicename = AAT1290_NAME;
+
 	/* Register LED Flash class device */
-	ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+	ret = led_classdev_flash_register_ext(&pdev->dev, fled_cdev,
+					      &init_data);
 	if (ret < 0)
 		goto err_flash_register;
 
diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c
index 7ecf080..5a0cc7a 100644
--- a/drivers/leds/leds-adp5520.c
+++ b/drivers/leds/leds-adp5520.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs
  *
@@ -9,8 +10,6 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Eric Miao <eric.miao@marvell.com>
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-an30259a.c b/drivers/leds/leds-an30259a.c
new file mode 100644
index 0000000..250dc9d
--- /dev/null
+++ b/drivers/leds/leds-an30259a.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Driver for Panasonic AN30259A 3-channel LED driver
+//
+// Copyright (c) 2018 Simon Shields <simon@lineageos.org>
+//
+// Datasheet:
+// https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define AN30259A_MAX_LEDS 3
+
+#define AN30259A_REG_SRESET 0x00
+#define AN30259A_LED_SRESET BIT(0)
+
+/* LED power registers */
+#define AN30259A_REG_LED_ON 0x01
+#define AN30259A_LED_EN(x) BIT((x) - 1)
+#define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
+
+#define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
+
+/* slope control registers */
+#define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
+#define AN30259A_LED_SLOPETIME1(x) (x)
+#define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
+
+#define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
+#define AN30259A_LED_DUTYMAX(x) ((x) << 4)
+#define AN30259A_LED_DUTYMID(x) (x)
+
+#define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
+#define AN30259A_LED_DELAY(x) ((x) << 4)
+#define AN30259A_LED_DUTYMIN(x) (x)
+
+/* detention time control (length of each slope step) */
+#define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
+#define AN30259A_LED_DT1(x) (x)
+#define AN30259A_LED_DT2(x) ((x) << 4)
+
+#define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
+#define AN30259A_LED_DT3(x) (x)
+#define AN30259A_LED_DT4(x) ((x) << 4)
+
+#define AN30259A_REG_MAX 0x14
+
+#define AN30259A_BLINK_MAX_TIME 7500 /* ms */
+#define AN30259A_SLOPE_RESOLUTION 500 /* ms */
+
+#define AN30259A_NAME "an30259a"
+
+#define STATE_OFF 0
+#define STATE_KEEP 1
+#define STATE_ON 2
+
+struct an30259a;
+
+struct an30259a_led {
+	struct an30259a *chip;
+	struct fwnode_handle *fwnode;
+	struct led_classdev cdev;
+	u32 num;
+	u32 default_state;
+	bool sloping;
+};
+
+struct an30259a {
+	struct mutex mutex; /* held when writing to registers */
+	struct i2c_client *client;
+	struct an30259a_led leds[AN30259A_MAX_LEDS];
+	struct regmap *regmap;
+	int num_leds;
+};
+
+static int an30259a_brightness_set(struct led_classdev *cdev,
+				   enum led_brightness brightness)
+{
+	struct an30259a_led *led;
+	int ret;
+	unsigned int led_on;
+
+	led = container_of(cdev, struct an30259a_led, cdev);
+	mutex_lock(&led->chip->mutex);
+
+	ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
+	if (ret)
+		goto error;
+
+	switch (brightness) {
+	case LED_OFF:
+		led_on &= ~AN30259A_LED_EN(led->num);
+		led_on &= ~AN30259A_LED_SLOPE(led->num);
+		led->sloping = false;
+		break;
+	default:
+		led_on |= AN30259A_LED_EN(led->num);
+		if (led->sloping)
+			led_on |= AN30259A_LED_SLOPE(led->num);
+		ret = regmap_write(led->chip->regmap,
+				   AN30259A_REG_LEDCNT1(led->num),
+				   AN30259A_LED_DUTYMAX(0xf) |
+				   AN30259A_LED_DUTYMID(0xf));
+		if (ret)
+			goto error;
+		break;
+	}
+
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
+	if (ret)
+		goto error;
+
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
+			   brightness);
+
+error:
+	mutex_unlock(&led->chip->mutex);
+
+	return ret;
+}
+
+static int an30259a_blink_set(struct led_classdev *cdev,
+			      unsigned long *delay_off, unsigned long *delay_on)
+{
+	struct an30259a_led *led;
+	int ret, num;
+	unsigned int led_on;
+	unsigned long off = *delay_off, on = *delay_on;
+
+	led = container_of(cdev, struct an30259a_led, cdev);
+
+	mutex_lock(&led->chip->mutex);
+	num = led->num;
+
+	/* slope time can only be a multiple of 500ms. */
+	if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/* up to a maximum of 7500ms. */
+	if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/* if no blink specified, default to 1 Hz. */
+	if (!off && !on) {
+		*delay_off = off = 500;
+		*delay_on = on = 500;
+	}
+
+	/* convert into values the HW will understand. */
+	off /= AN30259A_SLOPE_RESOLUTION;
+	on /= AN30259A_SLOPE_RESOLUTION;
+
+	/* duty min should be zero (=off), delay should be zero. */
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
+			   AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
+	if (ret)
+		goto error;
+
+	/* reset detention time (no "breathing" effect). */
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
+			   AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
+	if (ret)
+		goto error;
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
+			   AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
+	if (ret)
+		goto error;
+
+	/* slope time controls on/off cycle length. */
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
+			   AN30259A_LED_SLOPETIME1(off) |
+			   AN30259A_LED_SLOPETIME2(on));
+	if (ret)
+		goto error;
+
+	/* Finally, enable slope mode. */
+	ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
+	if (ret)
+		goto error;
+
+	led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
+
+	ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
+
+	if (!ret)
+		led->sloping = true;
+error:
+	mutex_unlock(&led->chip->mutex);
+
+	return ret;
+}
+
+static int an30259a_dt_init(struct i2c_client *client,
+			    struct an30259a *chip)
+{
+	struct device_node *np = client->dev.of_node, *child;
+	int count, ret;
+	int i = 0;
+	const char *str;
+	struct an30259a_led *led;
+
+	count = of_get_child_count(np);
+	if (!count || count > AN30259A_MAX_LEDS)
+		return -EINVAL;
+
+	for_each_available_child_of_node(np, child) {
+		u32 source;
+
+		ret = of_property_read_u32(child, "reg", &source);
+		if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
+			dev_err(&client->dev, "Couldn't read LED address: %d\n",
+				ret);
+			count--;
+			continue;
+		}
+
+		led = &chip->leds[i];
+
+		led->num = source;
+		led->chip = chip;
+		led->fwnode = of_fwnode_handle(child);
+
+		if (!of_property_read_string(child, "default-state", &str)) {
+			if (!strcmp(str, "on"))
+				led->default_state = STATE_ON;
+			else if (!strcmp(str, "keep"))
+				led->default_state = STATE_KEEP;
+			else
+				led->default_state = STATE_OFF;
+		}
+
+		of_property_read_string(child, "linux,default-trigger",
+					&led->cdev.default_trigger);
+
+		i++;
+	}
+
+	if (!count)
+		return -EINVAL;
+
+	chip->num_leds = i;
+
+	return 0;
+}
+
+static const struct regmap_config an30259a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = AN30259A_REG_MAX,
+};
+
+static void an30259a_init_default_state(struct an30259a_led *led)
+{
+	struct an30259a *chip = led->chip;
+	int led_on, err;
+
+	switch (led->default_state) {
+	case STATE_ON:
+		led->cdev.brightness = LED_FULL;
+		break;
+	case STATE_KEEP:
+		err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
+		if (err)
+			break;
+
+		if (!(led_on & AN30259A_LED_EN(led->num))) {
+			led->cdev.brightness = LED_OFF;
+			break;
+		}
+		regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
+			    &led->cdev.brightness);
+		break;
+	default:
+		led->cdev.brightness = LED_OFF;
+	}
+
+	an30259a_brightness_set(&led->cdev, led->cdev.brightness);
+}
+
+static int an30259a_probe(struct i2c_client *client)
+{
+	struct an30259a *chip;
+	int i, err;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	err = an30259a_dt_init(client, chip);
+	if (err < 0)
+		return err;
+
+	mutex_init(&chip->mutex);
+	chip->client = client;
+	i2c_set_clientdata(client, chip);
+
+	chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		struct led_init_data init_data = {};
+
+		an30259a_init_default_state(&chip->leds[i]);
+		chip->leds[i].cdev.brightness_set_blocking =
+			an30259a_brightness_set;
+		chip->leds[i].cdev.blink_set = an30259a_blink_set;
+
+		init_data.fwnode = chip->leds[i].fwnode;
+		init_data.devicename = AN30259A_NAME;
+		init_data.default_label = ":";
+
+		err = devm_led_classdev_register_ext(&client->dev,
+						 &chip->leds[i].cdev,
+						 &init_data);
+		if (err < 0)
+			goto exit;
+	}
+	return 0;
+
+exit:
+	mutex_destroy(&chip->mutex);
+	return err;
+}
+
+static int an30259a_remove(struct i2c_client *client)
+{
+	struct an30259a *chip = i2c_get_clientdata(client);
+
+	mutex_destroy(&chip->mutex);
+
+	return 0;
+}
+
+static const struct of_device_id an30259a_match_table[] = {
+	{ .compatible = "panasonic,an30259a", },
+	{ /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, an30259a_match_table);
+
+static const struct i2c_device_id an30259a_id[] = {
+	{ "an30259a", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, an30259a_id);
+
+static struct i2c_driver an30259a_driver = {
+	.driver = {
+		.name = "leds-an30259a",
+		.of_match_table = of_match_ptr(an30259a_match_table),
+	},
+	.probe_new = an30259a_probe,
+	.remove = an30259a_remove,
+	.id_table = an30259a_id,
+};
+
+module_i2c_driver(an30259a_driver);
+
+MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
+MODULE_DESCRIPTION("AN30259A LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c
index 8d42e46..7fd557a 100644
--- a/drivers/leds/leds-apu.c
+++ b/drivers/leds/leds-apu.c
@@ -31,6 +31,8 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -47,12 +49,6 @@
 #define APU1_NUM_GPIO           3
 #define APU1_IOSIZE             sizeof(u8)
 
-#define APU2_FCH_ACPI_MMIO_BASE 0xFED80000
-#define APU2_FCH_GPIO_BASE      (APU2_FCH_ACPI_MMIO_BASE + 0x1500)
-#define APU2_GPIO_BIT_WRITE     22
-#define APU2_APU2_NUM_GPIO      4
-#define APU2_IOSIZE             sizeof(u32)
-
 /* LED access parameters */
 struct apu_param {
 	void __iomem *addr; /* for ioread/iowrite */
@@ -72,19 +68,9 @@
 	unsigned long offset; /* for devm_ioremap */
 };
 
-/* Supported platform types */
-enum apu_led_platform_types {
-	APU1_LED_PLATFORM,
-	APU2_LED_PLATFORM,
-};
-
 struct apu_led_pdata {
 	struct platform_device *pdev;
 	struct apu_led_priv *pled;
-	const struct apu_led_profile *profile;
-	enum apu_led_platform_types platform;
-	int num_led_instances;
-	int iosize; /* for devm_ioremap() */
 	spinlock_t lock;
 };
 
@@ -96,19 +82,6 @@
 	{ "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE },
 };
 
-static const struct apu_led_profile apu2_led_profile[] = {
-	{ "apu2:green:1", LED_ON,  APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE },
-	{ "apu2:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE },
-	{ "apu2:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
-};
-
-/* Same as apu2_led_profile, but with "3" in the LED names. */
-static const struct apu_led_profile apu3_led_profile[] = {
-	{ "apu3:green:1", LED_ON,  APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE },
-	{ "apu3:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE },
-	{ "apu3:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
-};
-
 static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
 	{
 		.ident = "apu",
@@ -117,54 +90,6 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "APU")
 		}
 	},
-	/* PC Engines APU2 with "Legacy" bios < 4.0.8 */
-	{
-		.ident = "apu2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "APU2")
-		}
-	},
-	/* PC Engines APU2 with "Legacy" bios >= 4.0.8 */
-	{
-		.ident = "apu2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "apu2")
-		}
-	},
-	/* PC Engines APU2 with "Mainline" bios */
-	{
-		.ident = "apu2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
-		}
-	},
-	/* PC Engines APU3 with "Legacy" bios < 4.0.8 */
-	{
-		.ident = "apu3",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "APU3")
-		}
-	},
-	/* PC Engines APU3 with "Legacy" bios >= 4.0.8 */
-	{
-		.ident = "apu3",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "apu3")
-		}
-	},
-	/* PC Engines APU2 with "Mainline" bios */
-	{
-		.ident = "apu3",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
-		}
-	},
 	{}
 };
 MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
@@ -178,52 +103,30 @@
 	spin_unlock(&apu_led->lock);
 }
 
-static void apu2_led_brightness_set(struct led_classdev *led, enum led_brightness value)
-{
-	struct apu_led_priv *pled = cdev_to_priv(led);
-	u32 value_new;
-
-	spin_lock(&apu_led->lock);
-
-	value_new = ioread32(pled->param.addr);
-
-	if (value)
-		value_new &= ~BIT(APU2_GPIO_BIT_WRITE);
-	else
-		value_new |= BIT(APU2_GPIO_BIT_WRITE);
-
-	iowrite32(value_new, pled->param.addr);
-
-	spin_unlock(&apu_led->lock);
-}
-
 static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld)
 {
 	int i;
 	int err;
 
 	apu_led->pled = devm_kcalloc(dev,
-		apu_led->num_led_instances, sizeof(struct apu_led_priv),
+		ARRAY_SIZE(apu1_led_profile), sizeof(struct apu_led_priv),
 		GFP_KERNEL);
 
 	if (!apu_led->pled)
 		return -ENOMEM;
 
-	for (i = 0; i < apu_led->num_led_instances; i++) {
+	for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++) {
 		struct apu_led_priv *pled = &apu_led->pled[i];
 		struct led_classdev *led_cdev = &pled->cdev;
 
-		led_cdev->name = apu_led->profile[i].name;
-		led_cdev->brightness = apu_led->profile[i].brightness;
+		led_cdev->name = apu1_led_profile[i].name;
+		led_cdev->brightness = apu1_led_profile[i].brightness;
 		led_cdev->max_brightness = 1;
 		led_cdev->flags = LED_CORE_SUSPENDRESUME;
-		if (apu_led->platform == APU1_LED_PLATFORM)
-			led_cdev->brightness_set = apu1_led_brightness_set;
-		else if (apu_led->platform == APU2_LED_PLATFORM)
-			led_cdev->brightness_set = apu2_led_brightness_set;
+		led_cdev->brightness_set = apu1_led_brightness_set;
 
 		pled->param.addr = devm_ioremap(dev,
-				apu_led->profile[i].offset, apu_led->iosize);
+				apu1_led_profile[i].offset, APU1_IOSIZE);
 		if (!pled->param.addr) {
 			err = -ENOMEM;
 			goto error;
@@ -233,7 +136,7 @@
 		if (err)
 			goto error;
 
-		led_cdev->brightness_set(led_cdev, apu_led->profile[i].brightness);
+		apu1_led_brightness_set(led_cdev, apu1_led_profile[i].brightness);
 	}
 
 	return 0;
@@ -254,28 +157,6 @@
 
 	apu_led->pdev = pdev;
 
-	if (dmi_match(DMI_PRODUCT_NAME, "APU")) {
-		apu_led->profile = apu1_led_profile;
-		apu_led->platform = APU1_LED_PLATFORM;
-		apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile);
-		apu_led->iosize = APU1_IOSIZE;
-	} else if (dmi_match(DMI_BOARD_NAME, "APU2") ||
-		   dmi_match(DMI_BOARD_NAME, "apu2") ||
-		   dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) {
-		apu_led->profile = apu2_led_profile;
-		apu_led->platform = APU2_LED_PLATFORM;
-		apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile);
-		apu_led->iosize = APU2_IOSIZE;
-	} else if (dmi_match(DMI_BOARD_NAME, "APU3") ||
-		   dmi_match(DMI_BOARD_NAME, "apu3") ||
-		   dmi_match(DMI_BOARD_NAME, "PC Engines apu3")) {
-		apu_led->profile = apu3_led_profile;
-		/* Otherwise identical to APU2. */
-		apu_led->platform = APU2_LED_PLATFORM;
-		apu_led->num_led_instances = ARRAY_SIZE(apu3_led_profile);
-		apu_led->iosize = APU2_IOSIZE;
-	}
-
 	spin_lock_init(&apu_led->lock);
 	return apu_led_config(&pdev->dev, apu_led);
 }
@@ -291,19 +172,9 @@
 	struct platform_device *pdev;
 	int err;
 
-	if (!dmi_match(DMI_SYS_VENDOR, "PC Engines")) {
-		pr_err("No PC Engines board detected\n");
-		return -ENODEV;
-	}
-	if (!(dmi_match(DMI_PRODUCT_NAME, "APU") ||
-	      dmi_match(DMI_PRODUCT_NAME, "APU2") ||
-	      dmi_match(DMI_PRODUCT_NAME, "apu2") ||
-	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") ||
-	      dmi_match(DMI_PRODUCT_NAME, "APU3") ||
-	      dmi_match(DMI_PRODUCT_NAME, "apu3") ||
-	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) {
-		pr_err("Unknown PC Engines board: %s\n",
-				dmi_get_system_info(DMI_PRODUCT_NAME));
+	if (!(dmi_match(DMI_SYS_VENDOR, "PC Engines") &&
+	      dmi_match(DMI_PRODUCT_NAME, "APU"))) {
+		pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n");
 		return -ENODEV;
 	}
 
@@ -326,7 +197,7 @@
 {
 	int i;
 
-	for (i = 0; i < apu_led->num_led_instances; i++)
+	for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++)
 		led_classdev_unregister(&apu_led->pled[i].cdev);
 
 	platform_device_unregister(apu_led->pdev);
@@ -337,6 +208,6 @@
 module_exit(apu_led_exit);
 
 MODULE_AUTHOR("Alan Mizrahi");
-MODULE_DESCRIPTION("PC Engines APU family LED driver");
+MODULE_DESCRIPTION("PC Engines APU1 front LED driver");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:leds_apu");
diff --git a/drivers/leds/leds-as3645a.c b/drivers/leds/leds-as3645a.c
index f883616..b7e0ae1 100644
--- a/drivers/leds/leds-as3645a.c
+++ b/drivers/leds/leds-as3645a.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * drivers/leds/leds-as3645a.c - AS3645A and LM3555 flash controllers driver
  *
@@ -7,15 +8,6 @@
  * Based on drivers/media/i2c/as3645a.c.
  *
  * Contact: Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
  */
 
 #include <linux/delay.h>
@@ -25,7 +17,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 #include <media/v4l2-flash-led-class.h>
@@ -132,11 +124,6 @@
 	u32 peak;
 };
 
-struct as3645a_names {
-	char flash[32];
-	char indicator[32];
-};
-
 struct as3645a {
 	struct i2c_client *client;
 
@@ -148,8 +135,8 @@
 	struct v4l2_flash *vf;
 	struct v4l2_flash *vfind;
 
-	struct device_node *flash_node;
-	struct device_node *indicator_node;
+	struct fwnode_handle *flash_node;
+	struct fwnode_handle *indicator_node;
 
 	struct as3645a_config cfg;
 
@@ -492,31 +479,30 @@
 }
 
 static int as3645a_parse_node(struct as3645a *flash,
-			      struct as3645a_names *names,
-			      struct device_node *node)
+			      struct fwnode_handle *fwnode)
 {
 	struct as3645a_config *cfg = &flash->cfg;
-	struct device_node *child;
-	const char *name;
+	struct fwnode_handle *child;
 	int rval;
 
-	for_each_child_of_node(node, child) {
+	fwnode_for_each_child_node(fwnode, child) {
 		u32 id = 0;
 
-		of_property_read_u32(child, "reg", &id);
+		fwnode_property_read_u32(child, "reg", &id);
 
 		switch (id) {
 		case AS_LED_FLASH:
-			flash->flash_node = of_node_get(child);
+			flash->flash_node = child;
 			break;
 		case AS_LED_INDICATOR:
-			flash->indicator_node = of_node_get(child);
+			flash->indicator_node = child;
 			break;
 		default:
 			dev_warn(&flash->client->dev,
 				 "unknown LED %u encountered, ignoring\n", id);
 			break;
 		}
+		fwnode_handle_get(child);
 	}
 
 	if (!flash->flash_node) {
@@ -524,42 +510,35 @@
 		return -ENODEV;
 	}
 
-	rval = of_property_read_string(flash->flash_node, "label", &name);
-	if (!rval)
-		strlcpy(names->flash, name, sizeof(names->flash));
-	else
-		snprintf(names->flash, sizeof(names->flash),
-			 "%s:flash", node->name);
-
-	rval = of_property_read_u32(flash->flash_node, "flash-timeout-us",
-				    &cfg->flash_timeout_us);
+	rval = fwnode_property_read_u32(flash->flash_node, "flash-timeout-us",
+					&cfg->flash_timeout_us);
 	if (rval < 0) {
 		dev_err(&flash->client->dev,
 			"can't read flash-timeout-us property for flash\n");
 		goto out_err;
 	}
 
-	rval = of_property_read_u32(flash->flash_node, "flash-max-microamp",
-				    &cfg->flash_max_ua);
+	rval = fwnode_property_read_u32(flash->flash_node, "flash-max-microamp",
+					&cfg->flash_max_ua);
 	if (rval < 0) {
 		dev_err(&flash->client->dev,
 			"can't read flash-max-microamp property for flash\n");
 		goto out_err;
 	}
 
-	rval = of_property_read_u32(flash->flash_node, "led-max-microamp",
-				    &cfg->assist_max_ua);
+	rval = fwnode_property_read_u32(flash->flash_node, "led-max-microamp",
+					&cfg->assist_max_ua);
 	if (rval < 0) {
 		dev_err(&flash->client->dev,
 			"can't read led-max-microamp property for flash\n");
 		goto out_err;
 	}
 
-	of_property_read_u32(flash->flash_node, "voltage-reference",
-			     &cfg->voltage_reference);
+	fwnode_property_read_u32(flash->flash_node, "voltage-reference",
+				 &cfg->voltage_reference);
 
-	of_property_read_u32(flash->flash_node, "ams,input-max-microamp",
-			     &cfg->peak);
+	fwnode_property_read_u32(flash->flash_node, "ams,input-max-microamp",
+				 &cfg->peak);
 	cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak);
 
 	if (!flash->indicator_node) {
@@ -568,15 +547,10 @@
 		goto out_err;
 	}
 
-	rval = of_property_read_string(flash->indicator_node, "label", &name);
-	if (!rval)
-		strlcpy(names->indicator, name, sizeof(names->indicator));
-	else
-		snprintf(names->indicator, sizeof(names->indicator),
-			 "%s:indicator", node->name);
 
-	rval = of_property_read_u32(flash->indicator_node, "led-max-microamp",
-				    &cfg->indicator_max_ua);
+	rval = fwnode_property_read_u32(flash->indicator_node,
+					"led-max-microamp",
+					&cfg->indicator_max_ua);
 	if (rval < 0) {
 		dev_err(&flash->client->dev,
 			"can't read led-max-microamp property for indicator\n");
@@ -586,27 +560,31 @@
 	return 0;
 
 out_err:
-	of_node_put(flash->flash_node);
-	of_node_put(flash->indicator_node);
+	fwnode_handle_put(flash->flash_node);
+	fwnode_handle_put(flash->indicator_node);
 
 	return rval;
 }
 
-static int as3645a_led_class_setup(struct as3645a *flash,
-				   struct as3645a_names *names)
+static int as3645a_led_class_setup(struct as3645a *flash)
 {
 	struct led_classdev *fled_cdev = &flash->fled.led_cdev;
 	struct led_classdev *iled_cdev = &flash->iled_cdev;
+	struct led_init_data init_data = {};
 	struct led_flash_setting *cfg;
 	int rval;
 
-	iled_cdev->name = names->indicator;
 	iled_cdev->brightness_set_blocking = as3645a_set_indicator_brightness;
 	iled_cdev->max_brightness =
 		flash->cfg.indicator_max_ua / AS_INDICATOR_INTENSITY_STEP;
 	iled_cdev->flags = LED_CORE_SUSPENDRESUME;
 
-	rval = led_classdev_register(&flash->client->dev, iled_cdev);
+	init_data.fwnode = flash->indicator_node;
+	init_data.devicename = AS_NAME;
+	init_data.default_label = "indicator";
+
+	rval = led_classdev_register_ext(&flash->client->dev, iled_cdev,
+					 &init_data);
 	if (rval < 0)
 		return rval;
 
@@ -624,7 +602,6 @@
 
 	flash->fled.ops = &as3645a_led_flash_ops;
 
-	fled_cdev->name = names->flash;
 	fled_cdev->brightness_set_blocking = as3645a_set_assist_brightness;
 	/* Value 0 is off in LED class. */
 	fled_cdev->max_brightness =
@@ -632,14 +609,22 @@
 				       flash->cfg.assist_max_ua) + 1;
 	fled_cdev->flags = LED_DEV_CAP_FLASH | LED_CORE_SUSPENDRESUME;
 
-	rval = led_classdev_flash_register(&flash->client->dev, &flash->fled);
-	if (rval) {
-		led_classdev_unregister(iled_cdev);
-		dev_err(&flash->client->dev,
-			"led_classdev_flash_register() failed, error %d\n",
-			rval);
-	}
+	init_data.fwnode = flash->flash_node;
+	init_data.devicename = AS_NAME;
+	init_data.default_label = "flash";
 
+	rval = led_classdev_flash_register_ext(&flash->client->dev,
+					       &flash->fled, &init_data);
+	if (rval)
+		goto out_err;
+
+	return rval;
+
+out_err:
+	led_classdev_unregister(iled_cdev);
+	dev_err(&flash->client->dev,
+		"led_classdev_flash_register() failed, error %d\n",
+		rval);
 	return rval;
 }
 
@@ -664,18 +649,19 @@
 		},
 	};
 
-	strlcpy(cfg.dev_name, led->name, sizeof(cfg.dev_name));
-	strlcpy(cfgind.dev_name, flash->iled_cdev.name, sizeof(cfg.dev_name));
+	strlcpy(cfg.dev_name, led->dev->kobj.name, sizeof(cfg.dev_name));
+	strlcpy(cfgind.dev_name, flash->iled_cdev.dev->kobj.name,
+		sizeof(cfgind.dev_name));
 
 	flash->vf = v4l2_flash_init(
-		&flash->client->dev, of_fwnode_handle(flash->flash_node),
-		&flash->fled, NULL, &cfg);
+		&flash->client->dev, flash->flash_node, &flash->fled, NULL,
+		&cfg);
 	if (IS_ERR(flash->vf))
 		return PTR_ERR(flash->vf);
 
 	flash->vfind = v4l2_flash_indicator_init(
-		&flash->client->dev, of_fwnode_handle(flash->indicator_node),
-		&flash->iled_cdev, &cfgind);
+		&flash->client->dev, flash->indicator_node, &flash->iled_cdev,
+		&cfgind);
 	if (IS_ERR(flash->vfind)) {
 		v4l2_flash_release(flash->vf);
 		return PTR_ERR(flash->vfind);
@@ -686,11 +672,10 @@
 
 static int as3645a_probe(struct i2c_client *client)
 {
-	struct as3645a_names names;
 	struct as3645a *flash;
 	int rval;
 
-	if (client->dev.of_node == NULL)
+	if (!dev_fwnode(&client->dev))
 		return -ENODEV;
 
 	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
@@ -699,7 +684,7 @@
 
 	flash->client = client;
 
-	rval = as3645a_parse_node(flash, &names, client->dev.of_node);
+	rval = as3645a_parse_node(flash, dev_fwnode(&client->dev));
 	if (rval < 0)
 		return rval;
 
@@ -714,7 +699,7 @@
 	if (rval)
 		goto out_mutex_destroy;
 
-	rval = as3645a_led_class_setup(flash, &names);
+	rval = as3645a_led_class_setup(flash);
 	if (rval)
 		goto out_mutex_destroy;
 
@@ -731,8 +716,8 @@
 	mutex_destroy(&flash->mutex);
 
 out_put_nodes:
-	of_node_put(flash->flash_node);
-	of_node_put(flash->indicator_node);
+	fwnode_handle_put(flash->flash_node);
+	fwnode_handle_put(flash->indicator_node);
 
 	return rval;
 }
@@ -751,8 +736,8 @@
 
 	mutex_destroy(&flash->mutex);
 
-	of_node_put(flash->flash_node);
-	of_node_put(flash->indicator_node);
+	fwnode_handle_put(flash->flash_node);
+	fwnode_handle_put(flash->indicator_node);
 
 	return 0;
 }
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 1b71eac..8cbc1b8 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 2cfd938..c50d34e 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
  *
  * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
  * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <linux/io.h>
 #include <linux/leds.h>
diff --git a/drivers/leds/leds-bcm6358.c b/drivers/leds/leds-bcm6358.c
index b2cc066..aec285f 100644
--- a/drivers/leds/leds-bcm6358.c
+++ b/drivers/leds/leds-bcm6358.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Driver for BCM6358 memory-mapped LEDs, based on leds-syscon.c
  *
  * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <linux/delay.h>
 #include <linux/io.h>
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 6b4de76..e7ec6bf 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * leds-bd2802.c - RGB LED Driver
  *
  * Copyright (C) 2009 Samsung Electronics
  * Kim Kyuwon <q1.kim@samsung.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c
index 851c192..e11fe17 100644
--- a/drivers/leds/leds-blinkm.c
+++ b/drivers/leds/leds-blinkm.c
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  *  leds-blinkm.c
  *  (c) Jan-Simon Möller (dl9pf@gmx.de)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -594,7 +581,6 @@
 		goto exit;
 	}
 
-	data->i2c_addr = 0x09;
 	data->i2c_addr = 0x08;
 	/* i2c addr  - use fake addr of 0x08 initially (real is 0x09) */
 	data->fw_ver = 0xfe;
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index 492789f..f512e99 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index 9be1957..ef22e1e 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2006 - Florian Fainelli <florian@openwrt.org>
  *
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 8d066fa..045c239 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  *  LEDs driver for the Cobalt Raq series.
  *
  *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/drivers/leds/leds-cpcap.c b/drivers/leds/leds-cpcap.c
index f0f28c4..9f3fa47 100644
--- a/drivers/leds/leds-cpcap.c
+++ b/drivers/leds/leds-cpcap.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (c) 2017 Sebastian Reichel <sre@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 or
- * later as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/leds.h>
diff --git a/drivers/leds/leds-cr0014114.c b/drivers/leds/leds-cr0014114.c
index 0e42624..2da448a 100644
--- a/drivers/leds/leds-cr0014114.c
+++ b/drivers/leds/leds-cr0014114.c
@@ -8,7 +8,6 @@
 #include <linux/of_device.h>
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
-#include <uapi/linux/uleds.h>
 
 /*
  *  CR0014114 SPI protocol descrtiption:
@@ -40,8 +39,9 @@
 #define CR_FW_DELAY_MSEC	10
 #define CR_RECOUNT_DELAY	(HZ * 3600)
 
+#define CR_DEV_NAME		"cr0014114"
+
 struct cr0014114_led {
-	char			name[LED_MAX_NAME_SIZE];
 	struct cr0014114	*priv;
 	struct led_classdev	ldev;
 	u8			brightness;
@@ -167,8 +167,7 @@
 						    struct cr0014114_led,
 						    ldev);
 
-	dev_dbg(led->priv->dev, "Set brightness of %s to %d\n",
-		led->name, brightness);
+	dev_dbg(led->priv->dev, "Set brightness to %d\n", brightness);
 
 	mutex_lock(&led->priv->lock);
 	led->brightness = (u8)brightness;
@@ -183,42 +182,32 @@
 	size_t			i = 0;
 	struct cr0014114_led	*led;
 	struct fwnode_handle	*child;
-	struct device_node	*np;
+	struct led_init_data	init_data = {};
 	int			ret;
-	const char		*str;
 
 	device_for_each_child_node(priv->dev, child) {
-		np = to_of_node(child);
 		led = &priv->leds[i];
 
-		ret = fwnode_property_read_string(child, "label", &str);
-		if (ret)
-			snprintf(led->name, sizeof(led->name),
-				 "cr0014114::");
-		else
-			snprintf(led->name, sizeof(led->name),
-				 "cr0014114:%s", str);
-
 		fwnode_property_read_string(child, "linux,default-trigger",
 					    &led->ldev.default_trigger);
 
 		led->priv			  = priv;
-		led->ldev.name			  = led->name;
 		led->ldev.max_brightness	  = CR_MAX_BRIGHTNESS;
 		led->ldev.brightness_set_blocking = cr0014114_set_sync;
 
-		ret = devm_of_led_classdev_register(priv->dev, np,
-						    &led->ldev);
+		init_data.fwnode = child;
+		init_data.devicename = CR_DEV_NAME;
+		init_data.default_label = ":";
+
+		ret = devm_led_classdev_register_ext(priv->dev, &led->ldev,
+						     &init_data);
 		if (ret) {
 			dev_err(priv->dev,
-				"failed to register LED device %s, err %d",
-				led->name, ret);
+				"failed to register LED device, err %d", ret);
 			fwnode_handle_put(child);
 			return ret;
 		}
 
-		led->ldev.dev->of_node = np;
-
 		i++;
 	}
 
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
index 5ff7d72..ed1b303 100644
--- a/drivers/leds/leds-da903x.c
+++ b/drivers/leds/leds-da903x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for Dialog Semiconductor DA9030/DA9034
  *
@@ -6,10 +7,6 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Eric Miao <eric.miao@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-da9052.c b/drivers/leds/leds-da9052.c
index 31d4c94..04060c8 100644
--- a/drivers/leds/leds-da9052.c
+++ b/drivers/leds/leds-da9052.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * LED Driver for Dialog DA9052 PMICs.
  *
  * Copyright(c) 2012 Dialog Semiconductor Ltd.
  *
  * Author: David Dajun Chen <dchen@diasemi.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-dac124s085.c b/drivers/leds/leds-dac124s085.c
index 5a5a86d..20dc9b9 100644
--- a/drivers/leds/leds-dac124s085.c
+++ b/drivers/leds/leds-dac124s085.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2008
  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
  *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License.  See the file COPYING in the main
- * directory of this archive for more details.
- *
  * LED driver for the DAC124S085 SPI DAC
  */
 
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index 257a813..bc6b420 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Driver for the Freecom FSG-3
  *
@@ -8,11 +9,6 @@
  * Based on leds-spitz.c
  * Copyright 2005-2006 Openedhand Ltd.
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-gpio-register.c b/drivers/leds/leds-gpio-register.c
index 75717ba..b9187e7 100644
--- a/drivers/leds/leds-gpio-register.c
+++ b/drivers/leds/leds-gpio-register.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2011 Pengutronix
  * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
  */
 #include <linux/err.h>
 #include <linux/leds.h>
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 764c313..a5c73f3 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for GPIOs
  *
  * Copyright (C) 2007 8D Technologies inc.
  * Raphael Assenat <raph@8d.com>
  * Copyright (C) 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -77,40 +73,11 @@
 
 static int create_gpio_led(const struct gpio_led *template,
 	struct gpio_led_data *led_dat, struct device *parent,
-	struct device_node *np, gpio_blink_set_t blink_set)
+	struct fwnode_handle *fwnode, gpio_blink_set_t blink_set)
 {
+	struct led_init_data init_data = {};
 	int ret, state;
 
-	led_dat->gpiod = template->gpiod;
-	if (!led_dat->gpiod) {
-		/*
-		 * This is the legacy code path for platform code that
-		 * still uses GPIO numbers. Ultimately we would like to get
-		 * rid of this block completely.
-		 */
-		unsigned long flags = GPIOF_OUT_INIT_LOW;
-
-		/* skip leds that aren't available */
-		if (!gpio_is_valid(template->gpio)) {
-			dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
-					template->gpio, template->name);
-			return 0;
-		}
-
-		if (template->active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-
-		ret = devm_gpio_request_one(parent, template->gpio, flags,
-					    template->name);
-		if (ret < 0)
-			return ret;
-
-		led_dat->gpiod = gpio_to_desc(template->gpio);
-		if (!led_dat->gpiod)
-			return -EINVAL;
-	}
-
-	led_dat->cdev.name = template->name;
 	led_dat->cdev.default_trigger = template->default_trigger;
 	led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
 	if (!led_dat->can_sleep)
@@ -141,7 +108,16 @@
 	if (ret < 0)
 		return ret;
 
-	return devm_of_led_classdev_register(parent, np, &led_dat->cdev);
+	if (template->name) {
+		led_dat->cdev.name = template->name;
+		ret = devm_led_classdev_register(parent, &led_dat->cdev);
+	} else {
+		init_data.fwnode = fwnode;
+		ret = devm_led_classdev_register_ext(parent, &led_dat->cdev,
+						     &init_data);
+	}
+
+	return ret;
 }
 
 struct gpio_leds_priv {
@@ -174,15 +150,6 @@
 		struct gpio_led_data *led_dat = &priv->leds[priv->num_leds];
 		struct gpio_led led = {};
 		const char *state = NULL;
-		struct device_node *np = to_of_node(child);
-
-		ret = fwnode_property_read_string(child, "label", &led.name);
-		if (ret && IS_ENABLED(CONFIG_OF) && np)
-			led.name = np->name;
-		if (!led.name) {
-			fwnode_handle_put(child);
-			return ERR_PTR(-EINVAL);
-		}
 
 		led.gpiod = devm_fwnode_get_gpiod_from_child(dev, NULL, child,
 							     GPIOD_ASIS,
@@ -192,6 +159,8 @@
 			return ERR_CAST(led.gpiod);
 		}
 
+		led_dat->gpiod = led.gpiod;
+
 		fwnode_property_read_string(child, "linux,default-trigger",
 					    &led.default_trigger);
 
@@ -212,12 +181,11 @@
 		if (fwnode_property_present(child, "panic-indicator"))
 			led.panic_indicator = 1;
 
-		ret = create_gpio_led(&led, led_dat, dev, np, NULL);
+		ret = create_gpio_led(&led, led_dat, dev, child, NULL);
 		if (ret < 0) {
 			fwnode_handle_put(child);
 			return ERR_PTR(ret);
 		}
-		led_dat->cdev.dev->of_node = np;
 		priv->num_leds++;
 	}
 
@@ -231,6 +199,52 @@
 
 MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
 
+static struct gpio_desc *gpio_led_get_gpiod(struct device *dev, int idx,
+					    const struct gpio_led *template)
+{
+	struct gpio_desc *gpiod;
+	unsigned long flags = GPIOF_OUT_INIT_LOW;
+	int ret;
+
+	/*
+	 * This means the LED does not come from the device tree
+	 * or ACPI, so let's try just getting it by index from the
+	 * device, this will hit the board file, if any and get
+	 * the GPIO from there.
+	 */
+	gpiod = devm_gpiod_get_index(dev, NULL, idx, flags);
+	if (!IS_ERR(gpiod)) {
+		gpiod_set_consumer_name(gpiod, template->name);
+		return gpiod;
+	}
+	if (PTR_ERR(gpiod) != -ENOENT)
+		return gpiod;
+
+	/*
+	 * This is the legacy code path for platform code that
+	 * still uses GPIO numbers. Ultimately we would like to get
+	 * rid of this block completely.
+	 */
+
+	/* skip leds that aren't available */
+	if (!gpio_is_valid(template->gpio))
+		return ERR_PTR(-ENOENT);
+
+	if (template->active_low)
+		flags |= GPIOF_ACTIVE_LOW;
+
+	ret = devm_gpio_request_one(dev, template->gpio, flags,
+				    template->name);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	gpiod = gpio_to_desc(template->gpio);
+	if (!gpiod)
+		return ERR_PTR(-EINVAL);
+
+	return gpiod;
+}
+
 static int gpio_led_probe(struct platform_device *pdev)
 {
 	struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -246,7 +260,22 @@
 
 		priv->num_leds = pdata->num_leds;
 		for (i = 0; i < priv->num_leds; i++) {
-			ret = create_gpio_led(&pdata->leds[i], &priv->leds[i],
+			const struct gpio_led *template = &pdata->leds[i];
+			struct gpio_led_data *led_dat = &priv->leds[i];
+
+			if (template->gpiod)
+				led_dat->gpiod = template->gpiod;
+			else
+				led_dat->gpiod =
+					gpio_led_get_gpiod(&pdev->dev,
+							   i, template);
+			if (IS_ERR(led_dat->gpiod)) {
+				dev_info(&pdev->dev, "Skipping unavailable LED gpio %d (%s)\n",
+					 template->gpio, template->name);
+				continue;
+			}
+
+			ret = create_gpio_led(template, led_dat,
 					      &pdev->dev, NULL,
 					      pdata->gpio_blink_set);
 			if (ret < 0)
diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c
index 137969f..54af9e6 100644
--- a/drivers/leds/leds-hp6xx.c
+++ b/drivers/leds/leds-hp6xx.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Triggers Core
  * For the HP Jornada 620/660/680/690 handhelds
  *
  * Copyright 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
  *     this driver is based on leds-spitz.c by Richard Purdie.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-ipaq-micro.c b/drivers/leds/leds-ipaq-micro.c
index 02f1733..504a95b 100644
--- a/drivers/leds/leds-ipaq-micro.c
+++ b/drivers/leds/leds-ipaq-micro.c
@@ -1,7 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  *
  * h3xxx atmel micro companion support, notification LED subdevice
  *
diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index f123309..ca6634b 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2015-16 Golden Delicious Computers
  *
  * Author: Nikolaus Schaller <hns@goldelico.com>
  *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License.  See the file COPYING in the main
- * directory of this archive for more details.
- *
  * LED driver for the IS31FL319{0,1,3,6,9} to drive 1, 3, 6 or 9 light
  * effect LEDs.
- *
  */
 
 #include <linux/err.h>
@@ -337,12 +333,11 @@
 {
 	struct is31fl319x_chip *is31;
 	struct device *dev = &client->dev;
-	struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
 	int err;
 	int i = 0;
 	u32 aggregated_led_microamp = IS31FL319X_CURRENT_MAX;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -EIO;
 
 	is31 = devm_kzalloc(&client->dev, sizeof(*is31), GFP_KERNEL);
diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index 31a9d74..6f29b89 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Driver for ISSI IS31FL32xx family of I2C LED controllers
  *
  * Copyright 2015 Allworx Corp.
  *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Datasheets:
  *   http://www.issi.com/US/product-analog-fxled-driver.shtml
  *   http://www.si-en.com/product.asp?parentid=890
@@ -328,12 +324,6 @@
 	return 0;
 }
 
-static inline size_t sizeof_is31fl32xx_priv(int num_leds)
-{
-	return sizeof(struct is31fl32xx_priv) +
-		      (sizeof(struct is31fl32xx_led_data) * num_leds);
-}
-
 static int is31fl32xx_parse_child_dt(const struct device *dev,
 				     const struct device_node *child,
 				     struct is31fl32xx_led_data *led_data)
@@ -454,7 +444,7 @@
 	if (!count)
 		return -EINVAL;
 
-	priv = devm_kzalloc(dev, sizeof_is31fl32xx_priv(count),
+	priv = devm_kzalloc(dev, struct_size(priv, leds, count),
 			    GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
index 45296aa..670efee 100644
--- a/drivers/leds/leds-ktd2692.c
+++ b/drivers/leds/leds-ktd2692.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED driver : leds-ktd2692.c
  *
  * Copyright (C) 2015 Samsung Electronics
  * Ingi Kim <ingi2.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/delay.h>
@@ -22,7 +19,7 @@
 /* Value related the movie mode */
 #define KTD2692_MOVIE_MODE_CURRENT_LEVELS	16
 #define KTD2692_MM_TO_FL_RATIO(x)		((x) / 3)
-#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE	8
+#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE	8
 
 /* Value related the flash mode */
 #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS	8
@@ -253,7 +250,7 @@
 	ktd2692_expresswire_reset(led);
 	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 
-	ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+	ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
 				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
 	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
 				 | KTD2692_REG_FLASH_CURRENT_BASE);
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index b38430c..2f8362f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2011 ST-Ericsson SA.
  * Copyright (C) 2009 Motorola, Inc.
  *
- * License Terms: GNU General Public License v2
- *
  * Simple driver for National Semiconductor LM3530 Backlight driver chip
  *
  * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
new file mode 100644
index 0000000..0507c65
--- /dev/null
+++ b/drivers/leds/leds-lm3532.c
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM3532 LED driver
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <uapi/linux/uleds.h>
+#include <linux/gpio/consumer.h>
+
+#define LM3532_NAME "lm3532-led"
+#define LM3532_BL_MODE_MANUAL	0x00
+#define LM3532_BL_MODE_ALS	0x01
+
+#define LM3532_REG_OUTPUT_CFG	0x10
+#define LM3532_REG_STARTSHUT_RAMP	0x11
+#define LM3532_REG_RT_RAMP	0x12
+#define LM3532_REG_PWM_A_CFG	0x13
+#define LM3532_REG_PWM_B_CFG	0x14
+#define LM3532_REG_PWM_C_CFG	0x15
+#define LM3532_REG_ZONE_CFG_A	0x16
+#define LM3532_REG_CTRL_A_FS_CURR	0x17
+#define LM3532_REG_ZONE_CFG_B	0x18
+#define LM3532_REG_CTRL_B_FS_CURR	0x19
+#define LM3532_REG_ZONE_CFG_C	0x1a
+#define LM3532_REG_CTRL_C_FS_CURR	0x1b
+#define LM3532_REG_ENABLE	0x1d
+#define LM3532_ALS_CONFIG	0x23
+#define LM3532_REG_ZN_0_HI	0x60
+#define LM3532_REG_ZN_0_LO	0x61
+#define LM3532_REG_ZN_1_HI	0x62
+#define LM3532_REG_ZN_1_LO	0x63
+#define LM3532_REG_ZN_2_HI	0x64
+#define LM3532_REG_ZN_2_LO	0x65
+#define LM3532_REG_ZN_3_HI	0x66
+#define LM3532_REG_ZN_3_LO	0x67
+#define LM3532_REG_ZONE_TRGT_A	0x70
+#define LM3532_REG_ZONE_TRGT_B	0x75
+#define LM3532_REG_ZONE_TRGT_C	0x7a
+#define LM3532_REG_MAX		0x7e
+
+/* Control Enable */
+#define LM3532_CTRL_A_ENABLE	BIT(0)
+#define LM3532_CTRL_B_ENABLE	BIT(1)
+#define LM3532_CTRL_C_ENABLE	BIT(2)
+
+/* PWM Zone Control */
+#define LM3532_PWM_ZONE_MASK	0x7c
+#define LM3532_PWM_ZONE_0_EN	BIT(2)
+#define LM3532_PWM_ZONE_1_EN	BIT(3)
+#define LM3532_PWM_ZONE_2_EN	BIT(4)
+#define LM3532_PWM_ZONE_3_EN	BIT(5)
+#define LM3532_PWM_ZONE_4_EN	BIT(6)
+
+/* Brightness Configuration */
+#define LM3532_I2C_CTRL		BIT(0)
+#define LM3532_ALS_CTRL		0
+#define LM3532_LINEAR_MAP	BIT(1)
+#define LM3532_ZONE_MASK	(BIT(2) | BIT(3) | BIT(4))
+#define LM3532_ZONE_0		0
+#define LM3532_ZONE_1		BIT(2)
+#define LM3532_ZONE_2		BIT(3)
+#define LM3532_ZONE_3		(BIT(2) | BIT(3))
+#define LM3532_ZONE_4		BIT(4)
+
+#define LM3532_ENABLE_ALS	BIT(3)
+#define LM3532_ALS_SEL_SHIFT	6
+
+/* Zone Boundary Register */
+#define LM3532_ALS_WINDOW_mV	2000
+#define LM3532_ALS_ZB_MAX	4
+#define LM3532_ALS_OFFSET_mV	2
+
+#define LM3532_CONTROL_A	0
+#define LM3532_CONTROL_B	1
+#define LM3532_CONTROL_C	2
+#define LM3532_MAX_CONTROL_BANKS 3
+#define LM3532_MAX_LED_STRINGS	3
+
+#define LM3532_OUTPUT_CFG_MASK	0x3
+#define LM3532_BRT_VAL_ADJUST	8
+#define LM3532_RAMP_DOWN_SHIFT	3
+
+#define LM3532_NUM_RAMP_VALS	8
+#define LM3532_NUM_AVG_VALS	8
+#define LM3532_NUM_IMP_VALS	32
+
+#define LM3532_FS_CURR_MIN	5000
+#define LM3532_FS_CURR_MAX	29800
+#define LM3532_FS_CURR_STEP	800
+
+/*
+ * struct lm3532_als_data
+ * @config - value of ALS configuration register
+ * @als1_imp_sel - value of ALS1 resistor select register
+ * @als2_imp_sel - value of ALS2 resistor select register
+ * @als_avrg_time - ALS averaging time
+ * @als_input_mode - ALS input mode for brightness control
+ * @als_vmin - Minimum ALS voltage
+ * @als_vmax - Maximum ALS voltage
+ * @zone_lo - values of ALS lo ZB(Zone Boundary) registers
+ * @zone_hi - values of ALS hi ZB(Zone Boundary) registers
+ */
+struct lm3532_als_data {
+	u8 config;
+	u8 als1_imp_sel;
+	u8 als2_imp_sel;
+	u8 als_avrg_time;
+	u8 als_input_mode;
+	u32 als_vmin;
+	u32 als_vmax;
+	u8 zones_lo[LM3532_ALS_ZB_MAX];
+	u8 zones_hi[LM3532_ALS_ZB_MAX];
+};
+
+/**
+ * struct lm3532_led
+ * @led_dev: led class device
+ * @priv - Pointer the device data structure
+ * @control_bank - Control bank the LED is associated to
+ * @mode - Mode of the LED string
+ * @ctrl_brt_pointer - Zone target register that controls the sink
+ * @num_leds - Number of LED strings are supported in this array
+ * @full_scale_current - The full-scale current setting for the current sink.
+ * @led_strings - The LED strings supported in this array
+ * @enabled - Enabled status
+ * @label - LED label
+ */
+struct lm3532_led {
+	struct led_classdev led_dev;
+	struct lm3532_data *priv;
+
+	int control_bank;
+	int mode;
+	int ctrl_brt_pointer;
+	int num_leds;
+	int full_scale_current;
+	int enabled:1;
+	u32 led_strings[LM3532_MAX_CONTROL_BANKS];
+	char label[LED_MAX_NAME_SIZE];
+};
+
+/**
+ * struct lm3532_data
+ * @enable_gpio - Hardware enable gpio
+ * @regulator: regulator
+ * @client: i2c client
+ * @regmap - Devices register map
+ * @dev - Pointer to the devices device struct
+ * @lock - Lock for reading/writing the device
+ * @als_data - Pointer to the als data struct
+ * @runtime_ramp_up - Runtime ramp up setting
+ * @runtime_ramp_down - Runtime ramp down setting
+ * @leds - Array of LED strings
+ */
+struct lm3532_data {
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct device *dev;
+	struct mutex lock;
+
+	struct lm3532_als_data *als_data;
+
+	u32 runtime_ramp_up;
+	u32 runtime_ramp_down;
+
+	struct lm3532_led leds[];
+};
+
+static const struct reg_default lm3532_reg_defs[] = {
+	{LM3532_REG_OUTPUT_CFG, 0xe4},
+	{LM3532_REG_STARTSHUT_RAMP, 0xc0},
+	{LM3532_REG_RT_RAMP, 0xc0},
+	{LM3532_REG_PWM_A_CFG, 0x82},
+	{LM3532_REG_PWM_B_CFG, 0x82},
+	{LM3532_REG_PWM_C_CFG, 0x82},
+	{LM3532_REG_ZONE_CFG_A, 0xf1},
+	{LM3532_REG_CTRL_A_FS_CURR, 0xf3},
+	{LM3532_REG_ZONE_CFG_B, 0xf1},
+	{LM3532_REG_CTRL_B_FS_CURR, 0xf3},
+	{LM3532_REG_ZONE_CFG_C, 0xf1},
+	{LM3532_REG_CTRL_C_FS_CURR, 0xf3},
+	{LM3532_REG_ENABLE, 0xf8},
+	{LM3532_ALS_CONFIG, 0x44},
+	{LM3532_REG_ZN_0_HI, 0x35},
+	{LM3532_REG_ZN_0_LO, 0x33},
+	{LM3532_REG_ZN_1_HI, 0x6a},
+	{LM3532_REG_ZN_1_LO, 0x66},
+	{LM3532_REG_ZN_2_HI, 0xa1},
+	{LM3532_REG_ZN_2_LO, 0x99},
+	{LM3532_REG_ZN_3_HI, 0xdc},
+	{LM3532_REG_ZN_3_LO, 0xcc},
+};
+
+static const struct regmap_config lm3532_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LM3532_REG_MAX,
+	.reg_defaults = lm3532_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330,
+						       92500, 7400, 6170, 5290,
+						       4630, 4110, 3700, 3360,
+						       3080, 2850, 2640, 2440,
+						       2310, 2180, 2060, 1950,
+						       1850, 1760, 1680, 1610,
+						       1540, 1480, 1420, 1370,
+						       1320, 1280, 1230, 1190};
+static int lm3532_get_als_imp_index(int als_imped)
+{
+	int i;
+
+	if (als_imped > als_imp_table[1])
+		return 0;
+
+	if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1])
+		return LM3532_NUM_IMP_VALS - 1;
+
+	for (i = 1; i < LM3532_NUM_IMP_VALS; i++) {
+		if (als_imped == als_imp_table[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (als_imped < als_imp_table[i - 1] &&
+		    als_imped > als_imp_table[i]) {
+			if (als_imped - als_imp_table[i - 1] <
+			    als_imp_table[i] - als_imped)
+				return i + 1;
+			else
+				return i;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int lm3532_get_index(const int table[], int size, int value)
+{
+	int i;
+
+	for (i = 1; i < size; i++) {
+		if (value == table[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (value > table[i - 1] &&
+		    value < table[i]) {
+			if (value - table[i - 1] < table[i] - value)
+				return i - 1;
+			else
+				return i;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static const int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680,
+							1433360, 286720, 573440,
+							1146880, 2293760};
+static int lm3532_get_als_avg_index(int avg_time)
+{
+	if (avg_time <= als_avrg_table[0])
+		return 0;
+
+	if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1])
+		return LM3532_NUM_AVG_VALS - 1;
+
+	return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS,
+				avg_time);
+}
+
+static const int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192,
+						     16384, 32768, 65536};
+static int lm3532_get_ramp_index(int ramp_time)
+{
+	if (ramp_time <= ramp_table[0])
+		return 0;
+
+	if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1])
+		return LM3532_NUM_RAMP_VALS - 1;
+
+	return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS,
+				ramp_time);
+}
+
+/* Caller must take care of locking */
+static int lm3532_led_enable(struct lm3532_led *led_data)
+{
+	int ctrl_en_val = BIT(led_data->control_bank);
+	int ret;
+
+	if (led_data->enabled)
+		return 0;
+
+	ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+					 ctrl_en_val, ctrl_en_val);
+	if (ret) {
+		dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(led_data->priv->regulator);
+	if (ret < 0)
+		return ret;
+
+	led_data->enabled = 1;
+
+	return 0;
+}
+
+/* Caller must take care of locking */
+static int lm3532_led_disable(struct lm3532_led *led_data)
+{
+	int ctrl_en_val = BIT(led_data->control_bank);
+	int ret;
+
+	if (!led_data->enabled)
+		return 0;
+
+	ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+					 ctrl_en_val, 0);
+	if (ret) {
+		dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_disable(led_data->priv->regulator);
+	if (ret < 0)
+		return ret;
+
+	led_data->enabled = 0;
+
+	return 0;
+}
+
+static int lm3532_brightness_set(struct led_classdev *led_cdev,
+				 enum led_brightness brt_val)
+{
+	struct lm3532_led *led =
+			container_of(led_cdev, struct lm3532_led, led_dev);
+	u8 brightness_reg;
+	int ret;
+
+	mutex_lock(&led->priv->lock);
+
+	if (led->mode == LM3532_ALS_CTRL) {
+		if (brt_val > LED_OFF)
+			ret = lm3532_led_enable(led);
+		else
+			ret = lm3532_led_disable(led);
+
+		goto unlock;
+	}
+
+	if (brt_val == LED_OFF) {
+		ret = lm3532_led_disable(led);
+		goto unlock;
+	}
+
+	ret = lm3532_led_enable(led);
+	if (ret)
+		goto unlock;
+
+	brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 +
+			 (led->ctrl_brt_pointer >> 2);
+
+	ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
+
+unlock:
+	mutex_unlock(&led->priv->lock);
+	return ret;
+}
+
+static int lm3532_init_registers(struct lm3532_led *led)
+{
+	struct lm3532_data *drvdata = led->priv;
+	unsigned int runtime_ramp_val;
+	unsigned int output_cfg_val = 0;
+	unsigned int output_cfg_shift = 0;
+	unsigned int output_cfg_mask = 0;
+	unsigned int brightness_config_reg;
+	unsigned int brightness_config_val;
+	int fs_current_reg;
+	int fs_current_val;
+	int ret, i;
+
+	if (drvdata->enable_gpio)
+		gpiod_direction_output(drvdata->enable_gpio, 1);
+
+	brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
+	/*
+	 * This could be hard coded to the default value but the control
+	 * brightness register may have changed during boot.
+	 */
+	ret = regmap_read(drvdata->regmap, brightness_config_reg,
+			  &led->ctrl_brt_pointer);
+	if (ret)
+		return ret;
+
+	led->ctrl_brt_pointer &= LM3532_ZONE_MASK;
+	brightness_config_val = led->ctrl_brt_pointer | led->mode;
+	ret = regmap_write(drvdata->regmap, brightness_config_reg,
+			   brightness_config_val);
+	if (ret)
+		return ret;
+
+	if (led->full_scale_current) {
+		fs_current_reg = LM3532_REG_CTRL_A_FS_CURR + led->control_bank * 2;
+		fs_current_val = (led->full_scale_current - LM3532_FS_CURR_MIN) /
+				 LM3532_FS_CURR_STEP;
+
+		ret = regmap_write(drvdata->regmap, fs_current_reg,
+				   fs_current_val);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < led->num_leds; i++) {
+		output_cfg_shift = led->led_strings[i] * 2;
+		output_cfg_val |= (led->control_bank << output_cfg_shift);
+		output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
+	}
+
+	ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
+				 output_cfg_mask, output_cfg_val);
+	if (ret)
+		return ret;
+
+	runtime_ramp_val = drvdata->runtime_ramp_up |
+			 (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
+
+	return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
+			    runtime_ramp_val);
+}
+
+static int lm3532_als_configure(struct lm3532_data *priv,
+				struct lm3532_led *led)
+{
+	struct lm3532_als_data *als = priv->als_data;
+	u32 als_vmin, als_vmax, als_vstep;
+	int zone_reg = LM3532_REG_ZN_0_HI;
+	int ret;
+	int i;
+
+	als_vmin = als->als_vmin;
+	als_vmax = als->als_vmax;
+
+	als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
+
+	for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
+		als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
+				LED_FULL) / 1000;
+		als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
+				als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
+
+		zone_reg = LM3532_REG_ZN_0_HI + i * 2;
+		ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
+		if (ret)
+			return ret;
+
+		zone_reg += 1;
+		ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
+		if (ret)
+			return ret;
+	}
+
+	als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
+		(als->als_input_mode << LM3532_ALS_SEL_SHIFT));
+
+	return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
+}
+
+static int lm3532_parse_als(struct lm3532_data *priv)
+{
+	struct lm3532_als_data *als;
+	int als_avg_time;
+	int als_impedance;
+	int ret;
+
+	als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
+	if (als == NULL)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin",
+				       &als->als_vmin);
+	if (ret)
+		als->als_vmin = 0;
+
+	ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax",
+				       &als->als_vmax);
+	if (ret)
+		als->als_vmax = LM3532_ALS_WINDOW_mV;
+
+	if (als->als_vmax > LM3532_ALS_WINDOW_mV) {
+		ret = -EINVAL;
+		return ret;
+	}
+
+	ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel",
+				      &als_impedance);
+	if (ret)
+		als->als1_imp_sel = 0;
+	else
+		als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance);
+
+	ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel",
+				      &als_impedance);
+	if (ret)
+		als->als2_imp_sel = 0;
+	else
+		als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance);
+
+	ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us",
+				      &als_avg_time);
+	if (ret)
+		als->als_avrg_time = 0;
+	else
+		als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time);
+
+	ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode",
+				      &als->als_input_mode);
+	if (ret)
+		als->als_input_mode = 0;
+
+	if (als->als_input_mode > LM3532_BL_MODE_ALS) {
+		ret = -EINVAL;
+		return ret;
+	}
+
+	priv->als_data = als;
+
+	return ret;
+}
+
+static int lm3532_parse_node(struct lm3532_data *priv)
+{
+	struct fwnode_handle *child = NULL;
+	struct lm3532_led *led;
+	const char *name;
+	int control_bank;
+	u32 ramp_time;
+	size_t i = 0;
+	int ret;
+
+	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
+						   "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->enable_gpio))
+		priv->enable_gpio = NULL;
+
+	priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
+	if (IS_ERR(priv->regulator))
+		priv->regulator = NULL;
+
+	ret = device_property_read_u32(&priv->client->dev, "ramp-up-us",
+				       &ramp_time);
+	if (ret)
+		dev_info(&priv->client->dev, "ramp-up-ms property missing\n");
+	else
+		priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time);
+
+	ret = device_property_read_u32(&priv->client->dev, "ramp-down-us",
+				       &ramp_time);
+	if (ret)
+		dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
+	else
+		priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time);
+
+	device_for_each_child_node(priv->dev, child) {
+		led = &priv->leds[i];
+
+		ret = fwnode_property_read_u32(child, "reg", &control_bank);
+		if (ret) {
+			dev_err(&priv->client->dev, "reg property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		if (control_bank > LM3532_CONTROL_C) {
+			dev_err(&priv->client->dev, "Control bank invalid\n");
+			continue;
+		}
+
+		led->control_bank = control_bank;
+
+		ret = fwnode_property_read_u32(child, "ti,led-mode",
+					       &led->mode);
+		if (ret) {
+			dev_err(&priv->client->dev, "ti,led-mode property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		if (fwnode_property_present(child, "led-max-microamp") &&
+		    fwnode_property_read_u32(child, "led-max-microamp",
+					     &led->full_scale_current))
+			dev_err(&priv->client->dev,
+				"Failed getting led-max-microamp\n");
+		else
+			led->full_scale_current = min(led->full_scale_current,
+						      LM3532_FS_CURR_MAX);
+
+		if (led->mode == LM3532_BL_MODE_ALS) {
+			led->mode = LM3532_ALS_CTRL;
+			ret = lm3532_parse_als(priv);
+			if (ret)
+				dev_err(&priv->client->dev, "Failed to parse als\n");
+			else
+				lm3532_als_configure(priv, led);
+		} else {
+			led->mode = LM3532_I2C_CTRL;
+		}
+
+		led->num_leds = fwnode_property_count_u32(child, "led-sources");
+		if (led->num_leds > LM3532_MAX_LED_STRINGS) {
+			dev_err(&priv->client->dev, "To many LED string defined\n");
+			continue;
+		}
+
+		ret = fwnode_property_read_u32_array(child, "led-sources",
+						    led->led_strings,
+						    led->num_leds);
+		if (ret) {
+			dev_err(&priv->client->dev, "led-sources property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		fwnode_property_read_string(child, "linux,default-trigger",
+					    &led->led_dev.default_trigger);
+
+		ret = fwnode_property_read_string(child, "label", &name);
+		if (ret)
+			snprintf(led->label, sizeof(led->label),
+				"%s::", priv->client->name);
+		else
+			snprintf(led->label, sizeof(led->label),
+				 "%s:%s", priv->client->name, name);
+
+		led->priv = priv;
+		led->led_dev.name = led->label;
+		led->led_dev.brightness_set_blocking = lm3532_brightness_set;
+
+		ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+		if (ret) {
+			dev_err(&priv->client->dev, "led register err: %d\n",
+				ret);
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		ret = lm3532_init_registers(led);
+		if (ret) {
+			dev_err(&priv->client->dev, "register init err: %d\n",
+				ret);
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		i++;
+	}
+
+child_out:
+	return ret;
+}
+
+static int lm3532_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct lm3532_data *drvdata;
+	int ret = 0;
+	int count;
+
+	count = device_get_child_node_count(&client->dev);
+	if (!count) {
+		dev_err(&client->dev, "LEDs are not defined in device tree!");
+		return -ENODEV;
+	}
+
+	drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
+			   GFP_KERNEL);
+	if (drvdata == NULL)
+		return -ENOMEM;
+
+	drvdata->client = client;
+	drvdata->dev = &client->dev;
+
+	drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
+	if (IS_ERR(drvdata->regmap)) {
+		ret = PTR_ERR(drvdata->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	mutex_init(&drvdata->lock);
+	i2c_set_clientdata(client, drvdata);
+
+	ret = lm3532_parse_node(drvdata);
+	if (ret) {
+		dev_err(&client->dev, "Failed to parse node\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int lm3532_remove(struct i2c_client *client)
+{
+	struct lm3532_data *drvdata = i2c_get_clientdata(client);
+
+	mutex_destroy(&drvdata->lock);
+
+	if (drvdata->enable_gpio)
+		gpiod_direction_output(drvdata->enable_gpio, 0);
+
+	return 0;
+}
+
+static const struct of_device_id of_lm3532_leds_match[] = {
+	{ .compatible = "ti,lm3532", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
+
+static const struct i2c_device_id lm3532_id[] = {
+	{LM3532_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, lm3532_id);
+
+static struct i2c_driver lm3532_i2c_driver = {
+	.probe = lm3532_probe,
+	.remove = lm3532_remove,
+	.id_table = lm3532_id,
+	.driver = {
+		.name = LM3532_NAME,
+		.of_match_table = of_lm3532_leds_match,
+	},
+};
+module_i2c_driver(lm3532_i2c_driver);
+
+MODULE_DESCRIPTION("Back Light driver for LM3532");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index 72224b5..9504ad4 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * leds-lm3533.c -- LM3533 LED driver
  *
  * Copyright (C) 2011-2012 Texas Instruments
  *
  * Author: Johan Hovold <jhovold@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under  the terms of the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 6cb94f9..a5abb49 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Simple driver for Texas Instruments LM355x LED Flash driver chip
 * Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
 */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
index 081aa71..b02972f 100644
--- a/drivers/leds/leds-lm3601x.c
+++ b/drivers/leds/leds-lm3601x.c
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <uapi/linux/uleds.h>
 
 #define LM3601X_LED_IR		0x0
 #define LM3601X_LED_TORCH	0x1
@@ -90,8 +89,6 @@
 	struct regmap *regmap;
 	struct mutex lock;
 
-	char led_name[LED_MAX_NAME_SIZE];
-
 	unsigned int flash_timeout;
 	unsigned int last_flag;
 
@@ -322,10 +319,12 @@
 	.fault_get		= lm3601x_flash_fault_get,
 };
 
-static int lm3601x_register_leds(struct lm3601x_led *led)
+static int lm3601x_register_leds(struct lm3601x_led *led,
+				 struct fwnode_handle *fwnode)
 {
 	struct led_classdev *led_cdev;
 	struct led_flash_setting *setting;
+	struct led_init_data init_data = {};
 
 	led->fled_cdev.ops = &flash_ops;
 
@@ -342,20 +341,25 @@
 	setting->val = led->flash_current_max;
 
 	led_cdev = &led->fled_cdev.led_cdev;
-	led_cdev->name = led->led_name;
 	led_cdev->brightness_set_blocking = lm3601x_brightness_set;
 	led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max,
 						LM3601X_TORCH_REG_DIV);
 	led_cdev->flags |= LED_DEV_CAP_FLASH;
 
-	return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
+	init_data.fwnode = fwnode;
+	init_data.devicename = led->client->name;
+	init_data.default_label = (led->led_mode == LM3601X_LED_TORCH) ?
+					"torch" : "infrared";
+
+	return led_classdev_flash_register_ext(&led->client->dev,
+						&led->fled_cdev, &init_data);
 }
 
-static int lm3601x_parse_node(struct lm3601x_led *led)
+static int lm3601x_parse_node(struct lm3601x_led *led,
+			      struct fwnode_handle **fwnode)
 {
 	struct fwnode_handle *child = NULL;
 	int ret = -ENODEV;
-	const char *name;
 
 	child = device_get_next_child_node(&led->client->dev, child);
 	if (!child) {
@@ -376,17 +380,6 @@
 		goto out_err;
 	}
 
-	ret = fwnode_property_read_string(child, "label", &name);
-	if (ret) {
-		if (led->led_mode == LM3601X_LED_TORCH)
-			name = "torch";
-		else
-			name = "infrared";
-	}
-
-	snprintf(led->led_name, sizeof(led->led_name),
-		"%s:%s", led->client->name, name);
-
 	ret = fwnode_property_read_u32(child, "led-max-microamp",
 					&led->torch_current_max);
 	if (ret) {
@@ -411,6 +404,8 @@
 		goto out_err;
 	}
 
+	*fwnode = child;
+
 out_err:
 	fwnode_handle_put(child);
 	return ret;
@@ -419,6 +414,7 @@
 static int lm3601x_probe(struct i2c_client *client)
 {
 	struct lm3601x_led *led;
+	struct fwnode_handle *fwnode;
 	int ret;
 
 	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
@@ -428,7 +424,7 @@
 	led->client = client;
 	i2c_set_clientdata(client, led);
 
-	ret = lm3601x_parse_node(led);
+	ret = lm3601x_parse_node(led, &fwnode);
 	if (ret)
 		return -ENODEV;
 
@@ -442,7 +438,7 @@
 
 	mutex_init(&led->lock);
 
-	return lm3601x_register_leds(led);
+	return lm3601x_register_leds(led, fwnode);
 }
 
 static int lm3601x_remove(struct i2c_client *client)
diff --git a/drivers/leds/leds-lm36274.c b/drivers/leds/leds-lm36274.c
new file mode 100644
index 0000000..836b60c
--- /dev/null
+++ b/drivers/leds/leds-lm36274.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM36274 LED chip family driver
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+#include <linux/leds-ti-lmu-common.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/ti-lmu.h>
+#include <linux/mfd/ti-lmu-register.h>
+
+#include <uapi/linux/uleds.h>
+
+#define LM36274_MAX_STRINGS	4
+#define LM36274_BL_EN		BIT(4)
+
+/**
+ * struct lm36274
+ * @pdev: platform device
+ * @led_dev: led class device
+ * @lmu_data: Register and setting values for common code
+ * @regmap: Devices register map
+ * @dev: Pointer to the devices device struct
+ * @led_sources - The LED strings supported in this array
+ * @num_leds - Number of LED strings are supported in this array
+ */
+struct lm36274 {
+	struct platform_device *pdev;
+	struct led_classdev led_dev;
+	struct ti_lmu_bank lmu_data;
+	struct regmap *regmap;
+	struct device *dev;
+
+	u32 led_sources[LM36274_MAX_STRINGS];
+	int num_leds;
+};
+
+static int lm36274_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brt_val)
+{
+	struct lm36274 *led = container_of(led_cdev, struct lm36274, led_dev);
+
+	return ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
+}
+
+static int lm36274_init(struct lm36274 *lm36274_data)
+{
+	int enable_val = 0;
+	int i;
+
+	for (i = 0; i < lm36274_data->num_leds; i++)
+		enable_val |= (1 << lm36274_data->led_sources[i]);
+
+	if (!enable_val) {
+		dev_err(lm36274_data->dev, "No LEDs were enabled\n");
+		return -EINVAL;
+	}
+
+	enable_val |= LM36274_BL_EN;
+
+	return regmap_write(lm36274_data->regmap, LM36274_REG_BL_EN,
+			    enable_val);
+}
+
+static int lm36274_parse_dt(struct lm36274 *lm36274_data)
+{
+	struct fwnode_handle *child = NULL;
+	char label[LED_MAX_NAME_SIZE];
+	struct device *dev = &lm36274_data->pdev->dev;
+	const char *name;
+	int child_cnt;
+	int ret = -EINVAL;
+
+	/* There should only be 1 node */
+	child_cnt = device_get_child_node_count(dev);
+	if (child_cnt != 1)
+		return -EINVAL;
+
+	device_for_each_child_node(dev, child) {
+		ret = fwnode_property_read_string(child, "label", &name);
+		if (ret)
+			snprintf(label, sizeof(label),
+				"%s::", lm36274_data->pdev->name);
+		else
+			snprintf(label, sizeof(label),
+				 "%s:%s", lm36274_data->pdev->name, name);
+
+		lm36274_data->num_leds = fwnode_property_count_u32(child, "led-sources");
+		if (lm36274_data->num_leds <= 0)
+			return -ENODEV;
+
+		ret = fwnode_property_read_u32_array(child, "led-sources",
+						     lm36274_data->led_sources,
+						     lm36274_data->num_leds);
+		if (ret) {
+			dev_err(dev, "led-sources property missing\n");
+			return ret;
+		}
+
+		fwnode_property_read_string(child, "linux,default-trigger",
+					&lm36274_data->led_dev.default_trigger);
+
+	}
+
+	lm36274_data->lmu_data.regmap = lm36274_data->regmap;
+	lm36274_data->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT;
+	lm36274_data->lmu_data.msb_brightness_reg = LM36274_REG_BRT_MSB;
+	lm36274_data->lmu_data.lsb_brightness_reg = LM36274_REG_BRT_LSB;
+
+	lm36274_data->led_dev.name = label;
+	lm36274_data->led_dev.max_brightness = MAX_BRIGHTNESS_11BIT;
+	lm36274_data->led_dev.brightness_set_blocking = lm36274_brightness_set;
+
+	return 0;
+}
+
+static int lm36274_probe(struct platform_device *pdev)
+{
+	struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
+	struct lm36274 *lm36274_data;
+	int ret;
+
+	lm36274_data = devm_kzalloc(&pdev->dev, sizeof(*lm36274_data),
+				    GFP_KERNEL);
+	if (!lm36274_data)
+		return -ENOMEM;
+
+	lm36274_data->pdev = pdev;
+	lm36274_data->dev = lmu->dev;
+	lm36274_data->regmap = lmu->regmap;
+	dev_set_drvdata(&pdev->dev, lm36274_data);
+
+	ret = lm36274_parse_dt(lm36274_data);
+	if (ret) {
+		dev_err(lm36274_data->dev, "Failed to parse DT node\n");
+		return ret;
+	}
+
+	ret = lm36274_init(lm36274_data);
+	if (ret) {
+		dev_err(lm36274_data->dev, "Failed to init the device\n");
+		return ret;
+	}
+
+	return devm_led_classdev_register(lm36274_data->dev,
+					 &lm36274_data->led_dev);
+}
+
+static const struct of_device_id of_lm36274_leds_match[] = {
+	{ .compatible = "ti,lm36274-backlight", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lm36274_leds_match);
+
+static struct platform_driver lm36274_driver = {
+	.probe  = lm36274_probe,
+	.driver = {
+		.name = "lm36274-leds",
+	},
+};
+module_platform_driver(lm36274_driver)
+
+MODULE_DESCRIPTION("Texas Instruments LM36274 LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index cada084..4805754 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Simple driver for Texas Instruments LM3642 LED Flash driver chip
 * Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
 */
 #include <linux/module.h>
 #include <linux/delay.h>
diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 4f413a7..3d381f2 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -13,7 +13,6 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
-#include <uapi/linux/uleds.h>
 
 #define LM36922_MODEL	0
 #define LM36923_MODEL	1
@@ -103,7 +102,6 @@
  * @regmap - Devices register map
  * @enable_gpio - VDDIO/EN gpio to enable communication interface
  * @regulator - LED supply regulator pointer
- * @label - LED label
  * @led_enable - LED sync to be enabled
  * @model_id - Current device model ID enumerated
  */
@@ -114,7 +112,6 @@
 	struct regmap *regmap;
 	struct gpio_desc *enable_gpio;
 	struct regulator *regulator;
-	char label[LED_MAX_NAME_SIZE];
 	int led_enable;
 	int model_id;
 };
@@ -325,7 +322,7 @@
 static int lm3692x_probe_dt(struct lm3692x_led *led)
 {
 	struct fwnode_handle *child = NULL;
-	const char *name;
+	struct led_init_data init_data = {};
 	int ret;
 
 	led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
@@ -350,30 +347,23 @@
 	fwnode_property_read_string(child, "linux,default-trigger",
 				    &led->led_dev.default_trigger);
 
-	ret = fwnode_property_read_string(child, "label", &name);
-	if (ret)
-		snprintf(led->label, sizeof(led->label),
-			"%s::", led->client->name);
-	else
-		snprintf(led->label, sizeof(led->label),
-			 "%s:%s", led->client->name, name);
-
 	ret = fwnode_property_read_u32(child, "reg", &led->led_enable);
 	if (ret) {
 		dev_err(&led->client->dev, "reg DT property missing\n");
 		return ret;
 	}
 
-	led->led_dev.name = led->label;
+	init_data.fwnode = child;
+	init_data.devicename = led->client->name;
+	init_data.default_label = ":";
 
-	ret = devm_led_classdev_register(&led->client->dev, &led->led_dev);
+	ret = devm_led_classdev_register_ext(&led->client->dev, &led->led_dev,
+					     &init_data);
 	if (ret) {
 		dev_err(&led->client->dev, "led register err: %d\n", ret);
 		return ret;
 	}
 
-	led->led_dev.dev->of_node = to_of_node(child);
-
 	return 0;
 }
 
diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c
new file mode 100644
index 0000000..b71711a
--- /dev/null
+++ b/drivers/leds/leds-lm3697.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM3697 LED chip family driver
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/leds-ti-lmu-common.h>
+
+#define LM3697_REV			0x0
+#define LM3697_RESET			0x1
+#define LM3697_OUTPUT_CONFIG		0x10
+#define LM3697_CTRL_A_RAMP		0x11
+#define LM3697_CTRL_B_RAMP		0x12
+#define LM3697_CTRL_A_B_RT_RAMP		0x13
+#define LM3697_CTRL_A_B_RAMP_CFG	0x14
+#define LM3697_CTRL_A_B_BRT_CFG		0x16
+#define LM3697_CTRL_A_FS_CURR_CFG	0x17
+#define LM3697_CTRL_B_FS_CURR_CFG	0x18
+#define LM3697_PWM_CFG			0x1c
+#define LM3697_CTRL_A_BRT_LSB		0x20
+#define LM3697_CTRL_A_BRT_MSB		0x21
+#define LM3697_CTRL_B_BRT_LSB		0x22
+#define LM3697_CTRL_B_BRT_MSB		0x23
+#define LM3697_CTRL_ENABLE		0x24
+
+#define LM3697_SW_RESET		BIT(0)
+
+#define LM3697_CTRL_A_EN	BIT(0)
+#define LM3697_CTRL_B_EN	BIT(1)
+#define LM3697_CTRL_A_B_EN	(LM3697_CTRL_A_EN | LM3697_CTRL_B_EN)
+
+#define LM3697_MAX_LED_STRINGS	3
+
+#define LM3697_CONTROL_A	0
+#define LM3697_CONTROL_B	1
+#define LM3697_MAX_CONTROL_BANKS 2
+
+/**
+ * struct lm3697_led -
+ * @hvled_strings: Array of LED strings associated with a control bank
+ * @label: LED label
+ * @led_dev: LED class device
+ * @priv: Pointer to the device struct
+ * @lmu_data: Register and setting values for common code
+ * @control_bank: Control bank the LED is associated to. 0 is control bank A
+ *		   1 is control bank B
+ */
+struct lm3697_led {
+	u32 hvled_strings[LM3697_MAX_LED_STRINGS];
+	char label[LED_MAX_NAME_SIZE];
+	struct led_classdev led_dev;
+	struct lm3697 *priv;
+	struct ti_lmu_bank lmu_data;
+	int control_bank;
+	int enabled;
+	int num_leds;
+};
+
+/**
+ * struct lm3697 -
+ * @enable_gpio: Hardware enable gpio
+ * @regulator: LED supply regulator pointer
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @dev: Pointer to the devices device struct
+ * @lock: Lock for reading/writing the device
+ * @leds: Array of LED strings
+ */
+struct lm3697 {
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct device *dev;
+	struct mutex lock;
+
+	int bank_cfg;
+
+	struct lm3697_led leds[];
+};
+
+static const struct reg_default lm3697_reg_defs[] = {
+	{LM3697_OUTPUT_CONFIG, 0x6},
+	{LM3697_CTRL_A_RAMP, 0x0},
+	{LM3697_CTRL_B_RAMP, 0x0},
+	{LM3697_CTRL_A_B_RT_RAMP, 0x0},
+	{LM3697_CTRL_A_B_RAMP_CFG, 0x0},
+	{LM3697_CTRL_A_B_BRT_CFG, 0x0},
+	{LM3697_CTRL_A_FS_CURR_CFG, 0x13},
+	{LM3697_CTRL_B_FS_CURR_CFG, 0x13},
+	{LM3697_PWM_CFG, 0xc},
+	{LM3697_CTRL_A_BRT_LSB, 0x0},
+	{LM3697_CTRL_A_BRT_MSB, 0x0},
+	{LM3697_CTRL_B_BRT_LSB, 0x0},
+	{LM3697_CTRL_B_BRT_MSB, 0x0},
+	{LM3697_CTRL_ENABLE, 0x0},
+};
+
+static const struct regmap_config lm3697_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LM3697_CTRL_ENABLE,
+	.reg_defaults = lm3697_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int lm3697_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brt_val)
+{
+	struct lm3697_led *led = container_of(led_cdev, struct lm3697_led,
+					      led_dev);
+	int ctrl_en_val = (1 << led->control_bank);
+	int ret;
+
+	mutex_lock(&led->priv->lock);
+
+	if (brt_val == LED_OFF) {
+		ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE,
+					 ctrl_en_val, ~ctrl_en_val);
+		if (ret) {
+			dev_err(&led->priv->client->dev, "Cannot write ctrl register\n");
+			goto brightness_out;
+		}
+
+		led->enabled = LED_OFF;
+	} else {
+		ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
+		if (ret) {
+			dev_err(&led->priv->client->dev,
+				"Cannot write brightness\n");
+			goto brightness_out;
+		}
+
+		if (!led->enabled) {
+			ret = regmap_update_bits(led->priv->regmap,
+						 LM3697_CTRL_ENABLE,
+						 ctrl_en_val, ctrl_en_val);
+			if (ret) {
+				dev_err(&led->priv->client->dev,
+					"Cannot enable the device\n");
+				goto brightness_out;
+			}
+
+			led->enabled = brt_val;
+		}
+	}
+
+brightness_out:
+	mutex_unlock(&led->priv->lock);
+	return ret;
+}
+
+static int lm3697_init(struct lm3697 *priv)
+{
+	struct lm3697_led *led;
+	int i, ret;
+
+	if (priv->enable_gpio) {
+		gpiod_direction_output(priv->enable_gpio, 1);
+	} else {
+		ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET);
+		if (ret) {
+			dev_err(&priv->client->dev, "Cannot reset the device\n");
+			goto out;
+		}
+	}
+
+	ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0);
+	if (ret) {
+		dev_err(&priv->client->dev, "Cannot write ctrl enable\n");
+		goto out;
+	}
+
+	ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg);
+	if (ret)
+		dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");
+
+	for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
+		led = &priv->leds[i];
+		ret = ti_lmu_common_set_ramp(&led->lmu_data);
+		if (ret)
+			dev_err(&priv->client->dev, "Setting the ramp rate failed\n");
+	}
+out:
+	return ret;
+}
+
+static int lm3697_probe_dt(struct lm3697 *priv)
+{
+	struct fwnode_handle *child = NULL;
+	struct lm3697_led *led;
+	const char *name;
+	int control_bank;
+	size_t i = 0;
+	int ret = -EINVAL;
+	int j;
+
+	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
+						   "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->enable_gpio)) {
+		ret = PTR_ERR(priv->enable_gpio);
+		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
+			ret);
+		return ret;
+	}
+
+	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
+	if (IS_ERR(priv->regulator))
+		priv->regulator = NULL;
+
+	device_for_each_child_node(priv->dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &control_bank);
+		if (ret) {
+			dev_err(&priv->client->dev, "reg property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		if (control_bank > LM3697_CONTROL_B) {
+			dev_err(&priv->client->dev, "reg property is invalid\n");
+			ret = -EINVAL;
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		led = &priv->leds[i];
+
+		ret = ti_lmu_common_get_brt_res(&priv->client->dev,
+						child, &led->lmu_data);
+		if (ret)
+			dev_warn(&priv->client->dev, "brightness resolution property missing\n");
+
+		led->control_bank = control_bank;
+		led->lmu_data.regmap = priv->regmap;
+		led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP +
+						 control_bank;
+		led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB +
+						   led->control_bank * 2;
+		led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB +
+						   led->control_bank * 2;
+
+		led->num_leds = fwnode_property_count_u32(child, "led-sources");
+		if (led->num_leds > LM3697_MAX_LED_STRINGS) {
+			dev_err(&priv->client->dev, "To many LED strings defined\n");
+			continue;
+		}
+
+		ret = fwnode_property_read_u32_array(child, "led-sources",
+						    led->hvled_strings,
+						    led->num_leds);
+		if (ret) {
+			dev_err(&priv->client->dev, "led-sources property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		for (j = 0; j < led->num_leds; j++)
+			priv->bank_cfg |=
+				(led->control_bank << led->hvled_strings[j]);
+
+		ret = ti_lmu_common_get_ramp_params(&priv->client->dev,
+						    child, &led->lmu_data);
+		if (ret)
+			dev_warn(&priv->client->dev, "runtime-ramp properties missing\n");
+
+		fwnode_property_read_string(child, "linux,default-trigger",
+					    &led->led_dev.default_trigger);
+
+		ret = fwnode_property_read_string(child, "label", &name);
+		if (ret)
+			snprintf(led->label, sizeof(led->label),
+				"%s::", priv->client->name);
+		else
+			snprintf(led->label, sizeof(led->label),
+				 "%s:%s", priv->client->name, name);
+
+		led->priv = priv;
+		led->led_dev.name = led->label;
+		led->led_dev.max_brightness = led->lmu_data.max_brightness;
+		led->led_dev.brightness_set_blocking = lm3697_brightness_set;
+
+		ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+		if (ret) {
+			dev_err(&priv->client->dev, "led register err: %d\n",
+				ret);
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		i++;
+	}
+
+child_out:
+	return ret;
+}
+
+static int lm3697_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lm3697 *led;
+	int count;
+	int ret;
+
+	count = device_get_child_node_count(&client->dev);
+	if (!count) {
+		dev_err(&client->dev, "LEDs are not defined in device tree!");
+		return -ENODEV;
+	}
+
+	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
+			   GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	mutex_init(&led->lock);
+	i2c_set_clientdata(client, led);
+
+	led->client = client;
+	led->dev = &client->dev;
+	led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lm3697_probe_dt(led);
+	if (ret)
+		return ret;
+
+	return lm3697_init(led);
+}
+
+static int lm3697_remove(struct i2c_client *client)
+{
+	struct lm3697 *led = i2c_get_clientdata(client);
+	int ret;
+
+	ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE,
+				 LM3697_CTRL_A_B_EN, 0);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed to disable the device\n");
+		return ret;
+	}
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm3697_id[] = {
+	{ "lm3697", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm3697_id);
+
+static const struct of_device_id of_lm3697_leds_match[] = {
+	{ .compatible = "ti,lm3697", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lm3697_leds_match);
+
+static struct i2c_driver lm3697_driver = {
+	.driver = {
+		.name	= "lm3697",
+		.of_match_table = of_lm3697_leds_match,
+	},
+	.probe		= lm3697_probe,
+	.remove		= lm3697_remove,
+	.id_table	= lm3697_id,
+};
+module_i2c_driver(lm3697_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 24c4b53..42dc46e 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * linux/drivers/leds/leds-locomo.c
  *
  * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
index be60c18..838e6f1 100644
--- a/drivers/leds/leds-lp3944.c
+++ b/drivers/leds/leds-lp3944.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
  *
  * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 /*
diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
index 847f7f2..4e4e542 100644
--- a/drivers/leds/leds-lp3952.c
+++ b/drivers/leds/leds-lp3952.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *	LED driver for TI lp3952 controller
  *
  *	Copyright (C) 2016, DAQRI, LLC.
  *	Author: Tony Makkiel <tony.makkiel@daqri.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/delay.h>
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 99689b5..6f02722 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LP5521 LED chip driver.
  *
@@ -6,20 +7,6 @@
  *
  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
  *          Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
  */
 
 #include <linux/delay.h>
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index a2e74fe..d0b931a 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * lp5523.c - LP5523, LP55231 LED Driver
  *
@@ -6,20 +7,6 @@
  *
  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
  *          Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
  */
 
 #include <linux/delay.h>
@@ -318,7 +305,9 @@
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		return ret;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
index 2a9009f..edb57c4 100644
--- a/drivers/leds/leds-lp5562.c
+++ b/drivers/leds/leds-lp5562.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LP5562 LED driver
  *
  * Copyright (C) 2013 Texas Instruments
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/delay.h>
@@ -263,7 +260,11 @@
 {
 	const struct firmware *fw = chip->fw;
 
-	if (fw->size > LP5562_PROGRAM_LENGTH) {
+	/*
+	 * the firmware is encoded in ascii hex character, with 2 chars
+	 * per byte
+	 */
+	if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
 		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 			fw->size);
 		return;
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 3d79a63..44ced02 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LP5521/LP5523/LP55231/LP5562 Common Driver
  *
@@ -5,10 +6,6 @@
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Derived from leds-lp5521.c, leds-lp5523.c
  */
 
@@ -201,7 +198,7 @@
 
 	if (!fw) {
 		dev_err(dev, "firmware request failed\n");
-		goto out;
+		return;
 	}
 
 	/* handling firmware data is chip dependent */
@@ -214,9 +211,9 @@
 
 	mutex_unlock(&chip->lock);
 
-out:
 	/* firmware should be released for other channel use */
 	release_firmware(chip->fw);
+	chip->fw = NULL;
 }
 
 static int lp55xx_request_firmware(struct lp55xx_chip *chip)
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
index abf1fb5..783ed51 100644
--- a/drivers/leds/leds-lp55xx-common.h
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * LP55XX Common Driver Header
  *
@@ -5,10 +6,6 @@
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
  * Derived from leds-lp5521.c, leds-lp5523.c
  */
 
diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c
index 4c800b5..2638dbf 100644
--- a/drivers/leds/leds-lp8501.c
+++ b/drivers/leds/leds-lp8501.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI LP8501 9 channel LED Driver
  *
  * Copyright (C) 2013 Texas Instruments
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
  */
 
 #include <linux/delay.h>
diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c
index 38c253a..9b9525c 100644
--- a/drivers/leds/leds-lp8788.c
+++ b/drivers/leds/leds-lp8788.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI LP8788 MFD - keyled driver
  *
  * Copyright 2012 Texas Instruments
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
index 39c72a9..ac2f5d6 100644
--- a/drivers/leds/leds-lp8860.c
+++ b/drivers/leds/leds-lp8860.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI LP8860 4-Channel LED Driver
  *
  * Copyright (C) 2014 Texas Instruments
  *
  * Author: Dan Murphy <dmurphy@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
  */
 
 #include <linux/i2c.h>
@@ -22,7 +18,6 @@
 #include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/slab.h>
-#include <uapi/linux/uleds.h>
 
 #define LP8860_DISP_CL1_BRT_MSB		0x00
 #define LP8860_DISP_CL1_BRT_LSB		0x01
@@ -87,6 +82,8 @@
 
 #define LP8860_CLEAR_FAULTS		0x01
 
+#define LP8860_NAME			"lp8860"
+
 /**
  * struct lp8860_led -
  * @lock - Lock for reading/writing the device
@@ -96,7 +93,6 @@
  * @eeprom_regmap - EEPROM register map
  * @enable_gpio - VDDIO/EN gpio to enable communication interface
  * @regulator - LED supply regulator pointer
- * @label - LED label
  */
 struct lp8860_led {
 	struct mutex lock;
@@ -106,7 +102,6 @@
 	struct regmap *eeprom_regmap;
 	struct gpio_desc *enable_gpio;
 	struct regulator *regulator;
-	char label[LED_MAX_NAME_SIZE];
 };
 
 struct lp8860_eeprom_reg {
@@ -387,25 +382,19 @@
 	struct lp8860_led *led;
 	struct device_node *np = client->dev.of_node;
 	struct device_node *child_node;
-	const char *name;
+	struct led_init_data init_data = {};
 
 	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
 	if (!led)
 		return -ENOMEM;
 
-	for_each_available_child_of_node(np, child_node) {
-		led->led_dev.default_trigger = of_get_property(child_node,
-						    "linux,default-trigger",
-						    NULL);
+	child_node = of_get_next_available_child(np, NULL);
+	if (!child_node)
+		return -EINVAL;
 
-		ret = of_property_read_string(child_node, "label", &name);
-		if (!ret)
-			snprintf(led->label, sizeof(led->label), "%s:%s",
-				 id->name, name);
-		else
-			snprintf(led->label, sizeof(led->label),
-				"%s::display_cluster", id->name);
-	}
+	led->led_dev.default_trigger = of_get_property(child_node,
+					    "linux,default-trigger",
+					    NULL);
 
 	led->enable_gpio = devm_gpiod_get_optional(&client->dev,
 						   "enable", GPIOD_OUT_LOW);
@@ -420,7 +409,6 @@
 		led->regulator = NULL;
 
 	led->client = client;
-	led->led_dev.name = led->label;
 	led->led_dev.brightness_set_blocking = lp8860_brightness_set;
 
 	mutex_init(&led->lock);
@@ -447,7 +435,12 @@
 	if (ret)
 		return ret;
 
-	ret = devm_led_classdev_register(&client->dev, &led->led_dev);
+	init_data.fwnode = of_fwnode_handle(child_node);
+	init_data.devicename = LP8860_NAME;
+	init_data.default_label = ":display_cluster";
+
+	ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev,
+					     &init_data);
 	if (ret) {
 		dev_err(&client->dev, "led register err: %d\n", ret);
 		return ret;
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index de3623e..c94995f 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -10,10 +10,10 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <uapi/linux/uleds.h>
+
+#define LED_LT3593_NAME "lt3593"
 
 struct lt3593_led_data {
-	char name[LED_MAX_NAME_SIZE];
 	struct led_classdev cdev;
 	struct gpio_desc *gpiod;
 };
@@ -60,67 +60,15 @@
 	return 0;
 }
 
-static struct lt3593_led_data *lt3593_led_probe_pdata(struct device *dev)
-{
-	struct gpio_led_platform_data *pdata = dev_get_platdata(dev);
-	const struct gpio_led *template = &pdata->leds[0];
-	struct lt3593_led_data *led_data;
-	int ret, state;
-
-	if (pdata->num_leds != 1)
-		return ERR_PTR(-EINVAL);
-
-	led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
-	if (!led_data)
-		return ERR_PTR(-ENOMEM);
-
-	led_data->cdev.name = template->name;
-	led_data->cdev.default_trigger = template->default_trigger;
-	led_data->cdev.brightness_set_blocking = lt3593_led_set;
-
-	state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
-	led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
-
-	if (!template->retain_state_suspended)
-		led_data->cdev.flags |= LED_CORE_SUSPENDRESUME;
-
-	ret = devm_gpio_request_one(dev, template->gpio, state ?
-				    GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-				    template->name);
-	if (ret < 0)
-		return ERR_PTR(ret);
-
-	led_data->gpiod = gpio_to_desc(template->gpio);
-	if (!led_data->gpiod)
-		return ERR_PTR(-EPROBE_DEFER);
-
-	ret = devm_led_classdev_register(dev, &led_data->cdev);
-	if (ret < 0)
-		return ERR_PTR(ret);
-
-	dev_info(dev, "registered LT3593 LED '%s' at GPIO %d\n",
-		 template->name, template->gpio);
-
-	return led_data;
-}
-
 static int lt3593_led_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct lt3593_led_data *led_data;
 	struct fwnode_handle *child;
 	int ret, state = LEDS_GPIO_DEFSTATE_OFF;
-	enum gpiod_flags flags = GPIOD_OUT_LOW;
+	struct led_init_data init_data = {};
 	const char *tmp;
 
-	if (dev_get_platdata(dev)) {
-		led_data = lt3593_led_probe_pdata(dev);
-		if (IS_ERR(led_data))
-			return PTR_ERR(led_data);
-
-		goto out;
-	}
-
 	if (!dev->of_node)
 		return -ENODEV;
 
@@ -139,52 +87,38 @@
 
 	child = device_get_next_child_node(dev, NULL);
 
-	ret = fwnode_property_read_string(child, "label", &tmp);
-	if (ret < 0)
-		snprintf(led_data->name, sizeof(led_data->name),
-			 "lt3593::");
-	else
-		snprintf(led_data->name, sizeof(led_data->name),
-			 "lt3593:%s", tmp);
-
 	fwnode_property_read_string(child, "linux,default-trigger",
 				    &led_data->cdev.default_trigger);
 
 	if (!fwnode_property_read_string(child, "default-state", &tmp)) {
-		if (!strcmp(tmp, "keep")) {
-			state = LEDS_GPIO_DEFSTATE_KEEP;
-			flags = GPIOD_ASIS;
-		} else if (!strcmp(tmp, "on")) {
+		if (!strcmp(tmp, "on"))
 			state = LEDS_GPIO_DEFSTATE_ON;
-			flags = GPIOD_OUT_HIGH;
-		}
 	}
 
-	led_data->cdev.name = led_data->name;
 	led_data->cdev.brightness_set_blocking = lt3593_led_set;
 	led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
 
-	ret = devm_led_classdev_register(dev, &led_data->cdev);
+	init_data.fwnode = child;
+	init_data.devicename = LED_LT3593_NAME;
+	init_data.default_label = ":";
+
+	ret = devm_led_classdev_register_ext(dev, &led_data->cdev, &init_data);
 	if (ret < 0) {
 		fwnode_handle_put(child);
 		return ret;
 	}
 
 	led_data->cdev.dev->of_node = dev->of_node;
-
-out:
 	platform_set_drvdata(pdev, led_data);
 
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id of_lt3593_leds_match[] = {
 	{ .compatible = "lltc,lt3593", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, of_lt3593_leds_match);
-#endif
 
 static struct platform_driver lt3593_led_driver = {
 	.probe		= lt3593_led_probe,
diff --git a/drivers/leds/leds-max77650.c b/drivers/leds/leds-max77650.c
new file mode 100644
index 0000000..4c2d0b3
--- /dev/null
+++ b/drivers/leds/leds-max77650.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// LED driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_LED_NUM_LEDS		3
+
+#define MAX77650_LED_A_BASE		0x40
+#define MAX77650_LED_B_BASE		0x43
+
+#define MAX77650_LED_BR_MASK		GENMASK(4, 0)
+#define MAX77650_LED_EN_MASK		GENMASK(7, 6)
+
+#define MAX77650_LED_MAX_BRIGHTNESS	MAX77650_LED_BR_MASK
+
+/* Enable EN_LED_MSTR. */
+#define MAX77650_LED_TOP_DEFAULT	BIT(0)
+
+#define MAX77650_LED_ENABLE		GENMASK(7, 6)
+#define MAX77650_LED_DISABLE		0x00
+
+#define MAX77650_LED_A_DEFAULT		MAX77650_LED_DISABLE
+/* 100% on duty */
+#define MAX77650_LED_B_DEFAULT		GENMASK(3, 0)
+
+struct max77650_led {
+	struct led_classdev cdev;
+	struct regmap *map;
+	unsigned int regA;
+	unsigned int regB;
+};
+
+static struct max77650_led *max77650_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct max77650_led, cdev);
+}
+
+static int max77650_led_brightness_set(struct led_classdev *cdev,
+				       enum led_brightness brightness)
+{
+	struct max77650_led *led = max77650_to_led(cdev);
+	int val, mask;
+
+	mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK;
+
+	if (brightness == LED_OFF)
+		val = MAX77650_LED_DISABLE;
+	else
+		val = MAX77650_LED_ENABLE | brightness;
+
+	return regmap_update_bits(led->map, led->regA, mask, val);
+}
+
+static int max77650_led_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *child;
+	struct max77650_led *leds, *led;
+	struct device *dev;
+	struct regmap *map;
+	const char *label;
+	int rv, num_leds;
+	u32 reg;
+
+	dev = &pdev->dev;
+
+	leds = devm_kcalloc(dev, sizeof(*leds),
+			    MAX77650_LED_NUM_LEDS, GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	map = dev_get_regmap(dev->parent, NULL);
+	if (!map)
+		return -ENODEV;
+
+	num_leds = device_get_child_node_count(dev);
+	if (!num_leds || num_leds > MAX77650_LED_NUM_LEDS)
+		return -ENODEV;
+
+	device_for_each_child_node(dev, child) {
+		rv = fwnode_property_read_u32(child, "reg", &reg);
+		if (rv || reg >= MAX77650_LED_NUM_LEDS) {
+			rv = -EINVAL;
+			goto err_node_put;
+		}
+
+		led = &leds[reg];
+		led->map = map;
+		led->regA = MAX77650_LED_A_BASE + reg;
+		led->regB = MAX77650_LED_B_BASE + reg;
+		led->cdev.brightness_set_blocking = max77650_led_brightness_set;
+		led->cdev.max_brightness = MAX77650_LED_MAX_BRIGHTNESS;
+
+		rv = fwnode_property_read_string(child, "label", &label);
+		if (rv) {
+			led->cdev.name = "max77650::";
+		} else {
+			led->cdev.name = devm_kasprintf(dev, GFP_KERNEL,
+							"max77650:%s", label);
+			if (!led->cdev.name) {
+				rv = -ENOMEM;
+				goto err_node_put;
+			}
+		}
+
+		fwnode_property_read_string(child, "linux,default-trigger",
+					    &led->cdev.default_trigger);
+
+		rv = devm_led_classdev_register(dev, &led->cdev);
+		if (rv)
+			goto err_node_put;
+
+		rv = regmap_write(map, led->regA, MAX77650_LED_A_DEFAULT);
+		if (rv)
+			goto err_node_put;
+
+		rv = regmap_write(map, led->regB, MAX77650_LED_B_DEFAULT);
+		if (rv)
+			goto err_node_put;
+	}
+
+	return regmap_write(map,
+			    MAX77650_REG_CNFG_LED_TOP,
+			    MAX77650_LED_TOP_DEFAULT);
+err_node_put:
+	fwnode_handle_put(child);
+	return rv;
+}
+
+static struct platform_driver max77650_led_driver = {
+	.driver = {
+		.name = "max77650-led",
+	},
+	.probe = max77650_led_probe,
+};
+module_platform_driver(max77650_led_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max77650-led");
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
index adf0f19..fec5609 100644
--- a/drivers/leds/leds-max77693.c
+++ b/drivers/leds/leds-max77693.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Flash class driver for the flash cell of max77693 mfd.
  *
@@ -5,10 +6,6 @@
  *
  *	Authors: Jacek Anaszewski <j.anaszewski@samsung.com>
  *		 Andrzej Hajda <a.hajda@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/led-class-flash.h>
diff --git a/drivers/leds/leds-max8997.c b/drivers/leds/leds-max8997.c
index 8c019c2..512a11d 100644
--- a/drivers/leds/leds-max8997.c
+++ b/drivers/leds/leds-max8997.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * leds-max8997.c - LED class driver for MAX8997 LEDs.
  *
  * Copyright (C) 2011 Samsung Electronics
  * Donggeun Kim <dg77.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 47ad7de..5cd810c 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for Freescale MC13783/MC13892/MC34708
  *
@@ -9,10 +10,6 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *      Eric Miao <eric.miao@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c
index dec2a6e..6b1b471 100644
--- a/drivers/leds/leds-menf21bmc.c
+++ b/drivers/leds/leds-menf21bmc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  *  MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
  *
@@ -6,11 +7,6 @@
  *  STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
  *
  *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
index 1ee48cb..cabe379 100644
--- a/drivers/leds/leds-mlxreg.c
+++ b/drivers/leds/leds-mlxreg.c
@@ -22,6 +22,7 @@
 #define MLXREG_LED_AMBER_SOLID		0x09 /* Solid amber */
 #define MLXREG_LED_BLINK_3HZ		167 /* ~167 msec off/on - HW support */
 #define MLXREG_LED_BLINK_6HZ		83 /* ~83 msec off/on - HW support */
+#define MLXREG_LED_CAPABILITY_CLEAR	GENMASK(31, 8) /* Clear mask */
 
 /**
  * struct mlxreg_led_data - led control data:
@@ -187,6 +188,7 @@
 	struct mlxreg_led_data *led_data;
 	struct led_classdev *led_cdev;
 	enum led_brightness brightness;
+	u32 regval;
 	int i;
 	int err;
 
@@ -196,6 +198,23 @@
 		if (!led_data)
 			return -ENOMEM;
 
+		if (data->capability) {
+			err = regmap_read(led_pdata->regmap, data->capability,
+					  &regval);
+			if (err) {
+				dev_err(&priv->pdev->dev, "Failed to query capability register\n");
+				return err;
+			}
+			if (!(regval & data->bit))
+				continue;
+			/*
+			 * Field "bit" can contain one capability bit in 0 byte
+			 * and offset bit in 1-3 bytes. Clear capability bit and
+			 * keep only offset bit.
+			 */
+			data->bit &= MLXREG_LED_CAPABILITY_CLEAR;
+		}
+
 		led_cdev = &led_data->led_cdev;
 		led_data->data_parent = priv;
 		if (strstr(data->label, "red") ||
diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c
index 8893c74..2a13e31 100644
--- a/drivers/leds/leds-mt6323.c
+++ b/drivers/leds/leds-mt6323.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * LED driver for Mediatek MT6323 PMIC
  *
  * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
 #include <linux/leds.h>
diff --git a/drivers/leds/leds-net48xx.c b/drivers/leds/leds-net48xx.c
index 0d214c2..a93468c 100644
--- a/drivers/leds/leds-net48xx.c
+++ b/drivers/leds/leds-net48xx.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for Soekris net48xx
  *
  * Copyright (C) 2006 Chris Boot <bootc@bootc.net>
  *
  * Based on leds-ams-delta.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 62fa0de..14ef4cc 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
  *
  * Copyright (C) 2010 LaCie
  *
  * Author: Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/module.h>
@@ -28,7 +15,48 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/leds.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
+
+struct netxbig_gpio_ext {
+	unsigned int	*addr;
+	int		num_addr;
+	unsigned int	*data;
+	int		num_data;
+	unsigned int	enable;
+};
+
+enum netxbig_led_mode {
+	NETXBIG_LED_OFF,
+	NETXBIG_LED_ON,
+	NETXBIG_LED_SATA,
+	NETXBIG_LED_TIMER1,
+	NETXBIG_LED_TIMER2,
+	NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+	unsigned long		delay_on;
+	unsigned long		delay_off;
+	enum netxbig_led_mode	mode;
+};
+
+struct netxbig_led {
+	const char	*name;
+	const char	*default_trigger;
+	int		mode_addr;
+	int		*mode_val;
+	int		bright_addr;
+	int		bright_max;
+};
+
+struct netxbig_led_platform_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct netxbig_led_timer *timer;
+	int			num_timer;
+	struct netxbig_led	*leds;
+	int			num_leds;
+};
 
 /*
  * GPIO extension bus.
@@ -319,7 +347,6 @@
 	return devm_led_classdev_register(&pdev->dev, &led_dat->cdev);
 }
 
-#ifdef CONFIG_OF_GPIO
 static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
 				 struct netxbig_gpio_ext *gpio_ext)
 {
@@ -401,12 +428,14 @@
 	}
 
 	gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
-	if (!gpio_ext)
+	if (!gpio_ext) {
+		of_node_put(gpio_ext_np);
 		return -ENOMEM;
+	}
 	ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+	of_node_put(gpio_ext_np);
 	if (ret)
 		return ret;
-	of_node_put(gpio_ext_np);
 	pdata->gpio_ext = gpio_ext;
 
 	/* Timers (optional) */
@@ -535,30 +564,20 @@
 	{},
 };
 MODULE_DEVICE_TABLE(of, of_netxbig_leds_match);
-#else
-static inline int
-netxbig_leds_get_of_pdata(struct device *dev,
-			  struct netxbig_led_platform_data *pdata)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_OF_GPIO */
 
 static int netxbig_led_probe(struct platform_device *pdev)
 {
-	struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct netxbig_led_platform_data *pdata;
 	struct netxbig_led_data *leds_data;
 	int i;
 	int ret;
 
-	if (!pdata) {
-		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata)
-			return -ENOMEM;
-		ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
-		if (ret)
-			return ret;
-	}
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
+	if (ret)
+		return ret;
 
 	leds_data = devm_kcalloc(&pdev->dev,
 				 pdata->num_leds, sizeof(*leds_data),
@@ -584,7 +603,7 @@
 	.probe		= netxbig_led_probe,
 	.driver		= {
 		.name		= "leds-netxbig",
-		.of_match_table	= of_match_ptr(of_netxbig_leds_match),
+		.of_match_table	= of_netxbig_leds_match,
 	},
 };
 
diff --git a/drivers/leds/leds-nic78bx.c b/drivers/leds/leds-nic78bx.c
index 8d69e2b..f196f52 100644
--- a/drivers/leds/leds-nic78bx.c
+++ b/drivers/leds/leds-nic78bx.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2016 National Instruments Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index a0a7dc2..7c500df 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
  *
@@ -6,20 +7,6 @@
  * Author: Simon Guinot <sguinot@lacie.com>
  *
  * Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -258,7 +245,7 @@
 	struct device_node *np = dev->of_node;
 	struct device_node *child;
 	struct ns2_led *led, *leds;
-	int num_leds = 0;
+	int ret, num_leds = 0;
 
 	num_leds = of_get_child_count(np);
 	if (!num_leds)
@@ -272,16 +259,16 @@
 	led = leds;
 	for_each_child_of_node(np, child) {
 		const char *string;
-		int ret, i, num_modes;
+		int i, num_modes;
 		struct ns2_led_modval *modval;
 
 		ret = of_get_named_gpio(child, "cmd-gpio", 0);
 		if (ret < 0)
-			return ret;
+			goto err_node_put;
 		led->cmd = ret;
 		ret = of_get_named_gpio(child, "slow-gpio", 0);
 		if (ret < 0)
-			return ret;
+			goto err_node_put;
 		led->slow = ret;
 		ret = of_property_read_string(child, "label", &string);
 		led->name = (ret == 0) ? string : child->name;
@@ -294,7 +281,8 @@
 		if (ret < 0 || ret % 3) {
 			dev_err(dev,
 				"Missing or malformed modes-map property\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto err_node_put;
 		}
 
 		num_modes = ret / 3;
@@ -302,8 +290,10 @@
 				      num_modes,
 				      sizeof(struct ns2_led_modval),
 				      GFP_KERNEL);
-		if (!modval)
-			return -ENOMEM;
+		if (!modval) {
+			ret = -ENOMEM;
+			goto err_node_put;
+		}
 
 		for (i = 0; i < num_modes; i++) {
 			of_property_read_u32_index(child,
@@ -327,6 +317,10 @@
 	pdata->num_leds = num_leds;
 
 	return 0;
+
+err_node_put:
+	of_node_put(child);
+	return ret;
 }
 
 static const struct of_device_id of_ns2_leds_match[] = {
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 7fea18b..c7c7199 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * pca9532.c - 16-bit Led dimmer
  *
  * Copyright (C) 2011 Jan Weitzel
  * Copyright (C) 2008 Riku Voipio
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
  * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
- *
  */
 
 #include <linux/module.h>
@@ -20,7 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/leds-pca9532.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 
@@ -513,6 +509,7 @@
 	const struct i2c_device_id *id)
 {
 	int devid;
+	const struct of_device_id *of_id;
 	struct pca9532_data *data = i2c_get_clientdata(client);
 	struct pca9532_platform_data *pca9532_pdata =
 			dev_get_platdata(&client->dev);
@@ -528,8 +525,11 @@
 			dev_err(&client->dev, "no platform data\n");
 			return -EINVAL;
 		}
-		devid = (int)(uintptr_t)of_match_device(
-			of_pca9532_leds_match, &client->dev)->data;
+		of_id = of_match_device(of_pca9532_leds_match,
+				&client->dev);
+		if (unlikely(!of_id))
+			return -EINVAL;
+		devid = (int)(uintptr_t) of_id->data;
 	} else {
 		devid = id->driver_data;
 	}
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index f51b356..4037c50 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2007-2008 Extreme Engineering Solutions, Inc.
  *
  * Author: Nate Case <ncase@xes-inc.com>
  *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License.  See the file COPYING in the main
- * directory of this archive for more details.
- *
  * LED driver for various PCA955x I2C LED drivers
  *
  * Supported devices:
@@ -40,7 +37,6 @@
  *  bits the chip supports.
  */
 
-#include <linux/acpi.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -48,8 +44,8 @@
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
 #include <linux/of.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 
@@ -110,15 +106,6 @@
 };
 MODULE_DEVICE_TABLE(i2c, pca955x_id);
 
-static const struct acpi_device_id pca955x_acpi_ids[] = {
-	{ "PCA9550",  pca9550 },
-	{ "PCA9551",  pca9551 },
-	{ "PCA9552",  pca9552 },
-	{ "PCA9553",  pca9553 },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, pca955x_acpi_ids);
-
 struct pca955x {
 	struct mutex lock;
 	struct pca955x_led *leds;
@@ -373,16 +360,14 @@
 }
 #endif /* CONFIG_LEDS_PCA955X_GPIO */
 
-#if IS_ENABLED(CONFIG_OF)
 static struct pca955x_platform_data *
-pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip)
+pca955x_get_pdata(struct i2c_client *client, struct pca955x_chipdef *chip)
 {
-	struct device_node *np = client->dev.of_node;
-	struct device_node *child;
 	struct pca955x_platform_data *pdata;
+	struct fwnode_handle *child;
 	int count;
 
-	count = of_get_child_count(np);
+	count = device_get_child_node_count(&client->dev);
 	if (!count || count > chip->bits)
 		return ERR_PTR(-ENODEV);
 
@@ -396,24 +381,25 @@
 	if (!pdata->leds)
 		return ERR_PTR(-ENOMEM);
 
-	for_each_child_of_node(np, child) {
+	device_for_each_child_node(&client->dev, child) {
 		const char *name;
 		u32 reg;
 		int res;
 
-		res = of_property_read_u32(child, "reg", &reg);
+		res = fwnode_property_read_u32(child, "reg", &reg);
 		if ((res != 0) || (reg >= chip->bits))
 			continue;
 
-		if (of_property_read_string(child, "label", &name))
-			name = child->name;
+		res = fwnode_property_read_string(child, "label", &name);
+		if ((res != 0) && is_of_node(child))
+			name = to_of_node(child)->name;
 
 		snprintf(pdata->leds[reg].name, sizeof(pdata->leds[reg].name),
 			 "%s", name);
 
 		pdata->leds[reg].type = PCA955X_TYPE_LED;
-		of_property_read_u32(child, "type", &pdata->leds[reg].type);
-		of_property_read_string(child, "linux,default-trigger",
+		fwnode_property_read_u32(child, "type", &pdata->leds[reg].type);
+		fwnode_property_read_string(child, "linux,default-trigger",
 					&pdata->leds[reg].default_trigger);
 	}
 
@@ -429,15 +415,7 @@
 	{ .compatible = "nxp,pca9553", .data = (void *)pca9553 },
 	{},
 };
-
 MODULE_DEVICE_TABLE(of, of_pca955x_match);
-#else
-static struct pca955x_platform_data *
-pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip)
-{
-	return ERR_PTR(-ENODEV);
-}
-#endif
 
 static int pca955x_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
@@ -450,20 +428,11 @@
 	struct pca955x_platform_data *pdata;
 	int ngpios = 0;
 
-	if (id) {
-		chip = &pca955x_chipdefs[id->driver_data];
-	} else {
-		const struct acpi_device_id *acpi_id;
-
-		acpi_id = acpi_match_device(pca955x_acpi_ids, &client->dev);
-		if (!acpi_id)
-			return -ENODEV;
-		chip = &pca955x_chipdefs[acpi_id->driver_data];
-	}
-	adapter = to_i2c_adapter(client->dev.parent);
+	chip = &pca955x_chipdefs[id->driver_data];
+	adapter = client->adapter;
 	pdata = dev_get_platdata(&client->dev);
 	if (!pdata) {
-		pdata =	pca955x_pdata_of_init(client, chip);
+		pdata =	pca955x_get_pdata(client, chip);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
 	}
@@ -602,8 +571,7 @@
 static struct i2c_driver pca955x_driver = {
 	.driver = {
 		.name	= "leds-pca955x",
-		.acpi_match_table = ACPI_PTR(pca955x_acpi_ids),
-		.of_match_table = of_match_ptr(of_pca955x_match),
+		.of_match_table = of_pca955x_match,
 	},
 	.probe	= pca955x_probe,
 	.id_table = pca955x_id,
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 5c09081..4afc317 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011 bct electronic GmbH
  * Copyright 2013 Qtechnology/AS
@@ -7,10 +8,6 @@
  *
  * Based on leds-pca955x.c
  *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License.  See the file COPYING in the main
- * directory of this archive for more details.
- *
  * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
  * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
  *
@@ -25,7 +22,6 @@
  * or by adding the 'nxp,hw-blink' property to the DTS.
  */
 
-#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/string.h>
@@ -33,6 +29,7 @@
 #include <linux/leds.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/platform_data/leds-pca963x.h>
@@ -97,15 +94,6 @@
 };
 MODULE_DEVICE_TABLE(i2c, pca963x_id);
 
-static const struct acpi_device_id pca963x_acpi_ids[] = {
-	{ "PCA9632", pca9633 },
-	{ "PCA9633", pca9633 },
-	{ "PCA9634", pca9634 },
-	{ "PCA9635", pca9635 },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, pca963x_acpi_ids);
-
 struct pca963x_led;
 
 struct pca963x {
@@ -287,16 +275,15 @@
 	return 0;
 }
 
-#if IS_ENABLED(CONFIG_OF)
 static struct pca963x_platform_data *
-pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
+pca963x_get_pdata(struct i2c_client *client, struct pca963x_chipdef *chip)
 {
-	struct device_node *np = client->dev.of_node, *child;
 	struct pca963x_platform_data *pdata;
 	struct led_info *pca963x_leds;
+	struct fwnode_handle *child;
 	int count;
 
-	count = of_get_child_count(np);
+	count = device_get_child_node_count(&client->dev);
 	if (!count || count > chip->n_leds)
 		return ERR_PTR(-ENODEV);
 
@@ -305,18 +292,22 @@
 	if (!pca963x_leds)
 		return ERR_PTR(-ENOMEM);
 
-	for_each_child_of_node(np, child) {
+	device_for_each_child_node(&client->dev, child) {
 		struct led_info led = {};
 		u32 reg;
 		int res;
 
-		res = of_property_read_u32(child, "reg", &reg);
+		res = fwnode_property_read_u32(child, "reg", &reg);
 		if ((res != 0) || (reg >= chip->n_leds))
 			continue;
-		led.name =
-			of_get_property(child, "label", NULL) ? : child->name;
-		led.default_trigger =
-			of_get_property(child, "linux,default-trigger", NULL);
+
+		res = fwnode_property_read_string(child, "label", &led.name);
+		if ((res != 0) && is_of_node(child))
+			led.name = to_of_node(child)->name;
+
+		fwnode_property_read_string(child, "linux,default-trigger",
+					    &led.default_trigger);
+
 		pca963x_leds[reg] = led;
 	}
 	pdata = devm_kzalloc(&client->dev,
@@ -328,22 +319,23 @@
 	pdata->leds.num_leds = chip->n_leds;
 
 	/* default to open-drain unless totem pole (push-pull) is specified */
-	if (of_property_read_bool(np, "nxp,totem-pole"))
+	if (device_property_read_bool(&client->dev, "nxp,totem-pole"))
 		pdata->outdrv = PCA963X_TOTEM_POLE;
 	else
 		pdata->outdrv = PCA963X_OPEN_DRAIN;
 
 	/* default to software blinking unless hardware blinking is specified */
-	if (of_property_read_bool(np, "nxp,hw-blink"))
+	if (device_property_read_bool(&client->dev, "nxp,hw-blink"))
 		pdata->blink_type = PCA963X_HW_BLINK;
 	else
 		pdata->blink_type = PCA963X_SW_BLINK;
 
-	if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
+	if (device_property_read_u32(&client->dev, "nxp,period-scale",
+				     &chip->scaling))
 		chip->scaling = 1000;
 
 	/* default to non-inverted output, unless inverted is specified */
-	if (of_property_read_bool(np, "nxp,inverted-out"))
+	if (device_property_read_bool(&client->dev, "nxp,inverted-out"))
 		pdata->dir = PCA963X_INVERTED;
 	else
 		pdata->dir = PCA963X_NORMAL;
@@ -359,13 +351,6 @@
 	{},
 };
 MODULE_DEVICE_TABLE(of, of_pca963x_match);
-#else
-static struct pca963x_platform_data *
-pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
-{
-	return ERR_PTR(-ENODEV);
-}
-#endif
 
 static int pca963x_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
@@ -376,20 +361,11 @@
 	struct pca963x_chipdef *chip;
 	int i, err;
 
-	if (id) {
-		chip = &pca963x_chipdefs[id->driver_data];
-	} else {
-		const struct acpi_device_id *acpi_id;
-
-		acpi_id = acpi_match_device(pca963x_acpi_ids, &client->dev);
-		if (!acpi_id)
-			return -ENODEV;
-		chip = &pca963x_chipdefs[acpi_id->driver_data];
-	}
+	chip = &pca963x_chipdefs[id->driver_data];
 	pdata = dev_get_platdata(&client->dev);
 
 	if (!pdata) {
-		pdata = pca963x_dt_init(client, chip);
+		pdata = pca963x_get_pdata(client, chip);
 		if (IS_ERR(pdata)) {
 			dev_warn(&client->dev, "could not parse configuration\n");
 			pdata = NULL;
@@ -495,8 +471,7 @@
 static struct i2c_driver pca963x_driver = {
 	.driver = {
 		.name	= "leds-pca963x",
-		.of_match_table = of_match_ptr(of_pca963x_match),
-		.acpi_match_table = ACPI_PTR(pca963x_acpi_ids),
+		.of_match_table = of_pca963x_match,
 	},
 	.probe	= pca963x_probe,
 	.remove	= pca963x_remove,
diff --git a/drivers/leds/leds-pm8058.c b/drivers/leds/leds-pm8058.c
index 8988ba3..7869ccd 100644
--- a/drivers/leds/leds-pm8058.c
+++ b/drivers/leds/leds-pm8058.c
@@ -1,13 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2010, 2011, 2016 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/leds.h>
 #include <linux/module.h>
diff --git a/drivers/leds/leds-powernv.c b/drivers/leds/leds-powernv.c
index b1adbd7..cd43d5d 100644
--- a/drivers/leds/leds-powernv.c
+++ b/drivers/leds/leds-powernv.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * PowerNV LED Driver
  *
@@ -5,11 +6,6 @@
  *
  * Author: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
  * Author: Anshuman Khandual <khandual@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 
 #include <linux/leds.h>
@@ -285,6 +281,7 @@
 	struct device_node *led_node;
 	struct powernv_led_common *powernv_led_common;
 	struct device *dev = &pdev->dev;
+	int rc;
 
 	led_node = of_find_node_by_path("/ibm,opal/leds");
 	if (!led_node) {
@@ -295,15 +292,20 @@
 
 	powernv_led_common = devm_kzalloc(dev, sizeof(*powernv_led_common),
 					  GFP_KERNEL);
-	if (!powernv_led_common)
-		return -ENOMEM;
+	if (!powernv_led_common) {
+		rc = -ENOMEM;
+		goto out;
+	}
 
 	mutex_init(&powernv_led_common->lock);
 	powernv_led_common->max_led_type = cpu_to_be64(OPAL_SLOT_LED_TYPE_MAX);
 
 	platform_set_drvdata(pdev, powernv_led_common);
 
-	return powernv_led_classdev(pdev, led_node, powernv_led_common);
+	rc = powernv_led_classdev(pdev, led_node, powernv_led_common);
+out:
+	of_node_put(led_node);
+	return rc;
 }
 
 /* Platform driver remove */
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index df80c89..8b6965a 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * linux/drivers/leds-pwm.c
  *
@@ -6,10 +7,6 @@
  * Copyright 2009 Luotao Fu @ Pengutronix (l.fu@pengutronix.de)
  *
  * based on leds-gpio.c by Raphael Assenat <raph@8d.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -68,20 +65,8 @@
 	return 0;
 }
 
-static inline size_t sizeof_pwm_leds_priv(int num_leds)
-{
-	return sizeof(struct led_pwm_priv) +
-		      (sizeof(struct led_pwm_data) * num_leds);
-}
-
-static void led_pwm_cleanup(struct led_pwm_priv *priv)
-{
-	while (priv->num_leds--)
-		led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
-}
-
 static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
-		       struct led_pwm *led, struct device_node *child)
+		       struct led_pwm *led, struct fwnode_handle *fwnode)
 {
 	struct led_pwm_data *led_data = &priv->leds[priv->num_leds];
 	struct pwm_args pargs;
@@ -94,14 +79,15 @@
 	led_data->cdev.max_brightness = led->max_brightness;
 	led_data->cdev.flags = LED_CORE_SUSPENDRESUME;
 
-	if (child)
-		led_data->pwm = devm_of_pwm_get(dev, child, NULL);
+	if (fwnode)
+		led_data->pwm = devm_fwnode_pwm_get(dev, fwnode, NULL);
 	else
 		led_data->pwm = devm_pwm_get(dev, led->name);
 	if (IS_ERR(led_data->pwm)) {
 		ret = PTR_ERR(led_data->pwm);
-		dev_err(dev, "unable to request PWM for %s: %d\n",
-			led->name, ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "unable to request PWM for %s: %d\n",
+				led->name, ret);
 		return ret;
 	}
 
@@ -119,7 +105,7 @@
 	if (!led_data->period && (led->pwm_period_ns > 0))
 		led_data->period = led->pwm_period_ns;
 
-	ret = led_classdev_register(dev, &led_data->cdev);
+	ret = devm_led_classdev_register(dev, &led_data->cdev);
 	if (ret == 0) {
 		priv->num_leds++;
 		led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
@@ -131,27 +117,35 @@
 	return ret;
 }
 
-static int led_pwm_create_of(struct device *dev, struct led_pwm_priv *priv)
+static int led_pwm_create_fwnode(struct device *dev, struct led_pwm_priv *priv)
 {
-	struct device_node *child;
+	struct fwnode_handle *fwnode;
 	struct led_pwm led;
 	int ret = 0;
 
 	memset(&led, 0, sizeof(led));
 
-	for_each_child_of_node(dev->of_node, child) {
-		led.name = of_get_property(child, "label", NULL) ? :
-			   child->name;
+	device_for_each_child_node(dev, fwnode) {
+		ret = fwnode_property_read_string(fwnode, "label", &led.name);
+		if (ret && is_of_node(fwnode))
+			led.name = to_of_node(fwnode)->name;
 
-		led.default_trigger = of_get_property(child,
-						"linux,default-trigger", NULL);
-		led.active_low = of_property_read_bool(child, "active-low");
-		of_property_read_u32(child, "max-brightness",
-				     &led.max_brightness);
+		if (!led.name) {
+			fwnode_handle_put(fwnode);
+			return -EINVAL;
+		}
 
-		ret = led_pwm_add(dev, priv, &led, child);
+		fwnode_property_read_string(fwnode, "linux,default-trigger",
+					    &led.default_trigger);
+
+		led.active_low = fwnode_property_read_bool(fwnode,
+							   "active-low");
+		fwnode_property_read_u32(fwnode, "max-brightness",
+					 &led.max_brightness);
+
+		ret = led_pwm_add(dev, priv, &led, fwnode);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(fwnode);
 			break;
 		}
 	}
@@ -169,12 +163,12 @@
 	if (pdata)
 		count = pdata->num_leds;
 	else
-		count = of_get_child_count(pdev->dev.of_node);
+		count = device_get_child_node_count(&pdev->dev);
 
 	if (!count)
 		return -EINVAL;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count),
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count),
 			    GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -187,28 +181,17 @@
 				break;
 		}
 	} else {
-		ret = led_pwm_create_of(&pdev->dev, priv);
+		ret = led_pwm_create_fwnode(&pdev->dev, priv);
 	}
 
-	if (ret) {
-		led_pwm_cleanup(priv);
+	if (ret)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, priv);
 
 	return 0;
 }
 
-static int led_pwm_remove(struct platform_device *pdev)
-{
-	struct led_pwm_priv *priv = platform_get_drvdata(pdev);
-
-	led_pwm_cleanup(priv);
-
-	return 0;
-}
-
 static const struct of_device_id of_pwm_leds_match[] = {
 	{ .compatible = "pwm-leds", },
 	{},
@@ -217,7 +200,6 @@
 
 static struct platform_driver led_pwm_driver = {
 	.probe		= led_pwm_probe,
-	.remove		= led_pwm_remove,
 	.driver		= {
 		.name	= "leds_pwm",
 		.of_match_table = of_pwm_leds_match,
diff --git a/drivers/leds/leds-rb532.c b/drivers/leds/leds-rb532.c
index fcd1215..db5af83 100644
--- a/drivers/leds/leds-rb532.c
+++ b/drivers/leds/leds-rb532.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for the "User LED" on Routerboard532
  *
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index acf77ca..208c989 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * leds-regulator.c - LED class driver for regulator driven LEDs.
  *
  * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
  *
  * Inspired by leds-wm8350 driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 404da45..f8b8d6e 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /* drivers/leds/leds-s3c24xx.c
  *
  * (c) 2006 Simtec Electronics
@@ -5,10 +6,6 @@
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX - LEDs GPIO driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-sc27xx-bltc.c b/drivers/leds/leds-sc27xx-bltc.c
index 9d9b7aa..0ede874 100644
--- a/drivers/leds/leds-sc27xx-bltc.c
+++ b/drivers/leds/leds-sc27xx-bltc.c
@@ -6,7 +6,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <uapi/linux/uleds.h>
 
 /* PMIC global control register definition */
 #define SC27XX_MODULE_EN0	0xc08
@@ -32,11 +31,21 @@
 #define SC27XX_DUTY_MASK	GENMASK(15, 0)
 #define SC27XX_MOD_MASK		GENMASK(7, 0)
 
+#define SC27XX_CURVE_SHIFT	8
+#define SC27XX_CURVE_L_MASK	GENMASK(7, 0)
+#define SC27XX_CURVE_H_MASK	GENMASK(15, 8)
+
 #define SC27XX_LEDS_OFFSET	0x10
 #define SC27XX_LEDS_MAX		3
+#define SC27XX_LEDS_PATTERN_CNT	4
+/* Stage duration step, in milliseconds */
+#define SC27XX_LEDS_STEP	125
+/* Minimum and maximum duration, in milliseconds */
+#define SC27XX_DELTA_T_MIN	SC27XX_LEDS_STEP
+#define SC27XX_DELTA_T_MAX	(SC27XX_LEDS_STEP * 255)
 
 struct sc27xx_led {
-	char name[LED_MAX_NAME_SIZE];
+	struct fwnode_handle *fwnode;
 	struct led_classdev ldev;
 	struct sc27xx_led_priv *priv;
 	u8 line;
@@ -122,6 +131,113 @@
 	return err;
 }
 
+static void sc27xx_led_clamp_align_delta_t(u32 *delta_t)
+{
+	u32 v, offset, t = *delta_t;
+
+	v = t + SC27XX_LEDS_STEP / 2;
+	v = clamp_t(u32, v, SC27XX_DELTA_T_MIN, SC27XX_DELTA_T_MAX);
+	offset = v - SC27XX_DELTA_T_MIN;
+	offset = SC27XX_LEDS_STEP * (offset / SC27XX_LEDS_STEP);
+
+	*delta_t = SC27XX_DELTA_T_MIN + offset;
+}
+
+static int sc27xx_led_pattern_clear(struct led_classdev *ldev)
+{
+	struct sc27xx_led *leds = to_sc27xx_led(ldev);
+	struct regmap *regmap = leds->priv->regmap;
+	u32 base = sc27xx_led_get_offset(leds);
+	u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
+	u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
+	int err;
+
+	mutex_lock(&leds->priv->lock);
+
+	/* Reset the rise, high, fall and low time to zero. */
+	regmap_write(regmap, base + SC27XX_LEDS_CURVE0, 0);
+	regmap_write(regmap, base + SC27XX_LEDS_CURVE1, 0);
+
+	err = regmap_update_bits(regmap, ctrl_base,
+			(SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0);
+
+	ldev->brightness = LED_OFF;
+
+	mutex_unlock(&leds->priv->lock);
+
+	return err;
+}
+
+static int sc27xx_led_pattern_set(struct led_classdev *ldev,
+				  struct led_pattern *pattern,
+				  u32 len, int repeat)
+{
+	struct sc27xx_led *leds = to_sc27xx_led(ldev);
+	u32 base = sc27xx_led_get_offset(leds);
+	u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
+	u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
+	struct regmap *regmap = leds->priv->regmap;
+	int err;
+
+	/*
+	 * Must contain 4 tuples to configure the rise time, high time, fall
+	 * time and low time to enable the breathing mode.
+	 */
+	if (len != SC27XX_LEDS_PATTERN_CNT)
+		return -EINVAL;
+
+	mutex_lock(&leds->priv->lock);
+
+	sc27xx_led_clamp_align_delta_t(&pattern[0].delta_t);
+	err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
+				 SC27XX_CURVE_L_MASK,
+				 pattern[0].delta_t / SC27XX_LEDS_STEP);
+	if (err)
+		goto out;
+
+	sc27xx_led_clamp_align_delta_t(&pattern[1].delta_t);
+	err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
+				 SC27XX_CURVE_L_MASK,
+				 pattern[1].delta_t / SC27XX_LEDS_STEP);
+	if (err)
+		goto out;
+
+	sc27xx_led_clamp_align_delta_t(&pattern[2].delta_t);
+	err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
+				 SC27XX_CURVE_H_MASK,
+				 (pattern[2].delta_t / SC27XX_LEDS_STEP) <<
+				 SC27XX_CURVE_SHIFT);
+	if (err)
+		goto out;
+
+	sc27xx_led_clamp_align_delta_t(&pattern[3].delta_t);
+	err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
+				 SC27XX_CURVE_H_MASK,
+				 (pattern[3].delta_t / SC27XX_LEDS_STEP) <<
+				 SC27XX_CURVE_SHIFT);
+	if (err)
+		goto out;
+
+	err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
+				 SC27XX_DUTY_MASK,
+				 (pattern[1].brightness << SC27XX_DUTY_SHIFT) |
+				 SC27XX_MOD_MASK);
+	if (err)
+		goto out;
+
+	/* Enable the LED breathing mode */
+	err = regmap_update_bits(regmap, ctrl_base,
+				 SC27XX_LED_RUN << ctrl_shift,
+				 SC27XX_LED_RUN << ctrl_shift);
+	if (!err)
+		ldev->brightness = pattern[1].brightness;
+
+out:
+	mutex_unlock(&leds->priv->lock);
+
+	return err;
+}
+
 static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
 {
 	int i, err;
@@ -132,16 +248,24 @@
 
 	for (i = 0; i < SC27XX_LEDS_MAX; i++) {
 		struct sc27xx_led *led = &priv->leds[i];
+		struct led_init_data init_data = {};
 
 		if (!led->active)
 			continue;
 
 		led->line = i;
 		led->priv = priv;
-		led->ldev.name = led->name;
 		led->ldev.brightness_set_blocking = sc27xx_led_set;
+		led->ldev.pattern_set = sc27xx_led_pattern_set;
+		led->ldev.pattern_clear = sc27xx_led_pattern_clear;
+		led->ldev.default_trigger = "pattern";
 
-		err = devm_led_classdev_register(dev, &led->ldev);
+		init_data.fwnode = led->fwnode;
+		init_data.devicename = "sc27xx";
+		init_data.default_label = ":";
+
+		err = devm_led_classdev_register_ext(dev, &led->ldev,
+						     &init_data);
 		if (err)
 			return err;
 	}
@@ -154,7 +278,6 @@
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node, *child;
 	struct sc27xx_led_priv *priv;
-	const char *str;
 	u32 base, count, reg;
 	int err;
 
@@ -196,15 +319,8 @@
 			return -EINVAL;
 		}
 
+		priv->leds[reg].fwnode = of_fwnode_handle(child);
 		priv->leds[reg].active = true;
-
-		err = of_property_read_string(child, "label", &str);
-		if (err)
-			snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
-				 "sc27xx::");
-		else
-			snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
-				 "sc27xx:%s", str);
 	}
 
 	err = sc27xx_led_register(dev, priv);
@@ -241,4 +357,5 @@
 
 MODULE_DESCRIPTION("Spreadtrum SC27xx breathing light controller driver");
 MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-spi-byte.c b/drivers/leds/leds-spi-byte.c
new file mode 100644
index 0000000..b231b56
--- /dev/null
+++ b/drivers/leds/leds-spi-byte.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Christian Mauderer <oss@c-mauderer.de>
+
+/*
+ * The driver supports controllers with a very simple SPI protocol:
+ * - one LED is controlled by a single byte on MOSI
+ * - the value of the byte gives the brightness between two values (lowest to
+ *   highest)
+ * - no return value is necessary (no MISO signal)
+ *
+ * The value for minimum and maximum brightness depends on the device
+ * (compatible string).
+ *
+ * Supported devices:
+ * - "ubnt,acb-spi-led": Microcontroller (SONiX 8F26E611LA) based device used
+ *   for example in Ubiquiti airCube ISP. Reverse engineered protocol for this
+ *   controller:
+ *   * Higher two bits set a mode. Lower six bits are a parameter.
+ *   * Mode: 00 -> set brightness between 0x00 (min) and 0x3F (max)
+ *   * Mode: 01 -> pulsing pattern (min -> max -> min) with an interval. From
+ *     some tests, the period is about (50ms + 102ms * parameter). There is a
+ *     slightly different pattern starting from 0x10 (longer gap between the
+ *     pulses) but the time still follows that calculation.
+ *   * Mode: 10 -> same as 01 but with only a ramp from min to max. Again a
+ *     slight jump in the pattern at 0x10.
+ *   * Mode: 11 -> blinking (off -> 25% -> off -> 25% -> ...) with a period of
+ *     (105ms * parameter)
+ *   NOTE: This driver currently only supports mode 00.
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+#include <uapi/linux/uleds.h>
+
+struct spi_byte_chipdef {
+	/* SPI byte that will be send to switch the LED off */
+	u8	off_value;
+	/* SPI byte that will be send to switch the LED to maximum brightness */
+	u8	max_value;
+};
+
+struct spi_byte_led {
+	struct led_classdev		ldev;
+	struct spi_device		*spi;
+	char				name[LED_MAX_NAME_SIZE];
+	struct mutex			mutex;
+	const struct spi_byte_chipdef	*cdef;
+};
+
+static const struct spi_byte_chipdef ubnt_acb_spi_led_cdef = {
+	.off_value = 0x0,
+	.max_value = 0x3F,
+};
+
+static const struct of_device_id spi_byte_dt_ids[] = {
+	{ .compatible = "ubnt,acb-spi-led", .data = &ubnt_acb_spi_led_cdef },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, spi_byte_dt_ids);
+
+static int spi_byte_brightness_set_blocking(struct led_classdev *dev,
+					    enum led_brightness brightness)
+{
+	struct spi_byte_led *led = container_of(dev, struct spi_byte_led, ldev);
+	u8 value;
+	int ret;
+
+	value = (u8) brightness + led->cdef->off_value;
+
+	mutex_lock(&led->mutex);
+	ret = spi_write(led->spi, &value, sizeof(value));
+	mutex_unlock(&led->mutex);
+
+	return ret;
+}
+
+static int spi_byte_probe(struct spi_device *spi)
+{
+	const struct of_device_id *of_dev_id;
+	struct device_node *child;
+	struct device *dev = &spi->dev;
+	struct spi_byte_led *led;
+	const char *name = "leds-spi-byte::";
+	const char *state;
+	int ret;
+
+	of_dev_id = of_match_device(spi_byte_dt_ids, dev);
+	if (!of_dev_id)
+		return -EINVAL;
+
+	if (of_get_child_count(dev->of_node) != 1) {
+		dev_err(dev, "Device must have exactly one LED sub-node.");
+		return -EINVAL;
+	}
+	child = of_get_next_child(dev->of_node, NULL);
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	of_property_read_string(child, "label", &name);
+	strlcpy(led->name, name, sizeof(led->name));
+	led->spi = spi;
+	mutex_init(&led->mutex);
+	led->cdef = of_dev_id->data;
+	led->ldev.name = led->name;
+	led->ldev.brightness = LED_OFF;
+	led->ldev.max_brightness = led->cdef->max_value - led->cdef->off_value;
+	led->ldev.brightness_set_blocking = spi_byte_brightness_set_blocking;
+
+	state = of_get_property(child, "default-state", NULL);
+	if (state) {
+		if (!strcmp(state, "on")) {
+			led->ldev.brightness = led->ldev.max_brightness;
+		} else if (strcmp(state, "off")) {
+			/* all other cases except "off" */
+			dev_err(dev, "default-state can only be 'on' or 'off'");
+			return -EINVAL;
+		}
+	}
+	spi_byte_brightness_set_blocking(&led->ldev,
+					 led->ldev.brightness);
+
+	ret = devm_led_classdev_register(&spi->dev, &led->ldev);
+	if (ret) {
+		mutex_destroy(&led->mutex);
+		return ret;
+	}
+	spi_set_drvdata(spi, led);
+
+	return 0;
+}
+
+static int spi_byte_remove(struct spi_device *spi)
+{
+	struct spi_byte_led	*led = spi_get_drvdata(spi);
+
+	mutex_destroy(&led->mutex);
+
+	return 0;
+}
+
+static struct spi_driver spi_byte_driver = {
+	.probe		= spi_byte_probe,
+	.remove		= spi_byte_remove,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= spi_byte_dt_ids,
+	},
+};
+
+module_spi_driver(spi_byte_driver);
+
+MODULE_AUTHOR("Christian Mauderer <oss@c-mauderer.de>");
+MODULE_DESCRIPTION("single byte SPI LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:leds-spi-byte");
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index a9db867..245de44 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * SS4200-E Hardware API
  * Copyright (c) 2009, Intel Corporation.
  * Copyright IBM Corporation, 2009
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  * Author: Dave Hansen <dave@sr71.net>
  */
 
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index 7c09db8..eba7313 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /* leds-sunfire.c: SUNW,Ultra-Enterprise LED driver.
  *
  * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
index 3be40f7..b58f3ca 100644
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@@ -1,23 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Generic Syscon LEDs Driver
  *
  * Copyright (c) 2014, Linaro Limited
  * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 #include <linux/io.h>
 #include <linux/init.h>
@@ -129,7 +115,7 @@
 	}
 	sled->cdev.brightness_set = syscon_led_set;
 
-	ret = led_classdev_register(dev, &sled->cdev);
+	ret = devm_led_classdev_register(dev, &sled->cdev);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index 8f343af..58be20c 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * leds-tca6507
  *
@@ -757,7 +758,7 @@
 	int err;
 	int i = 0;
 
-	adapter = to_i2c_adapter(client->dev.parent);
+	adapter = client->adapter;
 	pdata = dev_get_platdata(&client->dev);
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
diff --git a/drivers/leds/leds-ti-lmu-common.c b/drivers/leds/leds-ti-lmu-common.c
new file mode 100644
index 0000000..d7f10ad
--- /dev/null
+++ b/drivers/leds/leds-ti-lmu-common.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2015 Texas Instruments
+// Copyright 2018 Sebastian Reichel
+// Copyright 2018 Pavel Machek <pavel@ucw.cz>
+// TI LMU LED common framework, based on previous work from
+// Milo Kim <milo.kim@ti.com>
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/of_device.h>
+
+#include <linux/leds-ti-lmu-common.h>
+
+static const unsigned int ramp_table[16] = {2048, 262000, 524000, 1049000,
+				2090000, 4194000, 8389000, 16780000, 33550000,
+				41940000, 50330000, 58720000, 67110000,
+				83880000, 100660000, 117440000};
+
+static int ti_lmu_common_update_brightness(struct ti_lmu_bank *lmu_bank,
+					   int brightness)
+{
+	struct regmap *regmap = lmu_bank->regmap;
+	u8 reg, val;
+	int ret;
+
+	/*
+	 * Brightness register update
+	 *
+	 * 11 bit dimming: update LSB bits and write MSB byte.
+	 *		   MSB brightness should be shifted.
+	 *  8 bit dimming: write MSB byte.
+	 */
+	if (lmu_bank->max_brightness == MAX_BRIGHTNESS_11BIT) {
+		reg = lmu_bank->lsb_brightness_reg;
+		ret = regmap_update_bits(regmap, reg,
+					 LMU_11BIT_LSB_MASK,
+					 brightness);
+		if (ret)
+			return ret;
+
+		val = brightness >> LMU_11BIT_MSB_SHIFT;
+	} else {
+		val = brightness;
+	}
+
+	reg = lmu_bank->msb_brightness_reg;
+
+	return regmap_write(regmap, reg, val);
+}
+
+int ti_lmu_common_set_brightness(struct ti_lmu_bank *lmu_bank, int brightness)
+{
+	return ti_lmu_common_update_brightness(lmu_bank, brightness);
+}
+EXPORT_SYMBOL(ti_lmu_common_set_brightness);
+
+static unsigned int ti_lmu_common_convert_ramp_to_index(unsigned int usec)
+{
+	int size = ARRAY_SIZE(ramp_table);
+	int i;
+
+	if (usec <= ramp_table[0])
+		return 0;
+
+	if (usec > ramp_table[size - 1])
+		return size - 1;
+
+	for (i = 1; i < size; i++) {
+		if (usec == ramp_table[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (usec > ramp_table[i - 1] && usec < ramp_table[i]) {
+			if (usec - ramp_table[i - 1] < ramp_table[i] - usec)
+				return i - 1;
+			else
+				return i;
+		}
+	}
+
+	return 0;
+}
+
+int ti_lmu_common_set_ramp(struct ti_lmu_bank *lmu_bank)
+{
+	struct regmap *regmap = lmu_bank->regmap;
+	u8 ramp, ramp_up, ramp_down;
+
+	if (lmu_bank->ramp_up_usec == 0 && lmu_bank->ramp_down_usec == 0) {
+		ramp_up = 0;
+		ramp_down = 0;
+	} else {
+		ramp_up = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_up_usec);
+		ramp_down = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_down_usec);
+	}
+
+	ramp = (ramp_up << 4) | ramp_down;
+
+	return regmap_write(regmap, lmu_bank->runtime_ramp_reg, ramp);
+
+}
+EXPORT_SYMBOL(ti_lmu_common_set_ramp);
+
+int ti_lmu_common_get_ramp_params(struct device *dev,
+				  struct fwnode_handle *child,
+				  struct ti_lmu_bank *lmu_data)
+{
+	int ret;
+
+	ret = fwnode_property_read_u32(child, "ramp-up-us",
+				 &lmu_data->ramp_up_usec);
+	if (ret)
+		dev_warn(dev, "ramp-up-us property missing\n");
+
+
+	ret = fwnode_property_read_u32(child, "ramp-down-us",
+				 &lmu_data->ramp_down_usec);
+	if (ret)
+		dev_warn(dev, "ramp-down-us property missing\n");
+
+	return 0;
+}
+EXPORT_SYMBOL(ti_lmu_common_get_ramp_params);
+
+int ti_lmu_common_get_brt_res(struct device *dev, struct fwnode_handle *child,
+				  struct ti_lmu_bank *lmu_data)
+{
+	int ret;
+
+	ret = device_property_read_u32(dev, "ti,brightness-resolution",
+				       &lmu_data->max_brightness);
+	if (ret)
+		ret = fwnode_property_read_u32(child,
+					       "ti,brightness-resolution",
+					       &lmu_data->max_brightness);
+	if (lmu_data->max_brightness <= 0) {
+		lmu_data->max_brightness = MAX_BRIGHTNESS_8BIT;
+		return ret;
+	}
+
+	if (lmu_data->max_brightness > MAX_BRIGHTNESS_11BIT)
+			lmu_data->max_brightness = MAX_BRIGHTNESS_11BIT;
+
+
+	return 0;
+}
+EXPORT_SYMBOL(ti_lmu_common_get_brt_res);
+
+MODULE_DESCRIPTION("TI LMU common LED framework");
+MODULE_AUTHOR("Sebastian Reichel");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ti-lmu-led-common");
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
index f5357f6..59ff088 100644
--- a/drivers/leds/leds-tlc591xx.c
+++ b/drivers/leds/leds-tlc591xx.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2014 Belkin Inc.
  * Copyright 2015 Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #include <linux/i2c.h>
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index c5798b9..082df7f 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED driver for WM831x status LEDs
  *
  * Copyright(C) 2009 Wolfson Microelectronics PLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index e1e4e9d..8f243c4 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED driver for WM8350 driven LEDS.
  *
  * Copyright(C) 2007, 2008 Wolfson Microelectronics PLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c
index 473fb6b..794697e 100644
--- a/drivers/leds/leds-wrap.c
+++ b/drivers/leds/leds-wrap.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LEDs driver for PCEngines WRAP
  *
  * Copyright (C) 2006 Kristian Kielhofner <kris@krisk.org>
  *
  * Based on leds-net48xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 7d38e6b..0b577ce 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * LED Core
  *
  * Copyright 2005 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 #ifndef __LEDS_H_INCLUDED
 #define __LEDS_H_INCLUDED
@@ -31,5 +27,6 @@
 extern struct rw_semaphore leds_list_lock;
 extern struct list_head leds_list;
 extern struct list_head trigger_list;
+extern const char * const led_colors[LED_COLOR_ID_MAX];
 
 #endif	/* __LEDS_H_INCLUDED */
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 4018af7..ce9429c 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 menuconfig LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
@@ -14,7 +15,7 @@
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
 	  blinking the LED without any further software interaction.
-	  For more details read Documentation/leds/leds-class.txt.
+	  For more details read Documentation/leds/leds-class.rst.
 
 	  If unsure, say Y.
 
@@ -129,4 +130,18 @@
 	  This allows LEDs to be controlled by network device activity.
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_PATTERN
+	tristate "LED Pattern Trigger"
+	help
+	  This allows LEDs to be controlled by a software or hardware pattern
+	  which is a series of tuples, of brightness and duration (ms).
+	  If unsure, say N
+
+config LEDS_TRIGGER_AUDIO
+	tristate "Audio Mute LED Trigger"
+	help
+	  This allows LEDs to be controlled by audio drivers for following
+	  the audio mute and mic-mute changes.
+	  If unsure, say N
+
 endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
index f3cfe19..733a83e 100644
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -13,3 +13,5 @@
 obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
 obj-$(CONFIG_LEDS_TRIGGER_PANIC)	+= ledtrig-panic.o
 obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_PATTERN)	+= ledtrig-pattern.o
+obj-$(CONFIG_LEDS_TRIGGER_AUDIO)	+= ledtrig-audio.o
diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
index bcbf41c..6a72b7e 100644
--- a/drivers/leds/trigger/ledtrig-activity.c
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Activity LED trigger
  *
  * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
  * Partially based on Atsushi Nemoto's ledtrig-heartbeat.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/init.h>
@@ -73,7 +70,7 @@
 	 * down to 16us, ensuring we won't overflow 32-bit computations below
 	 * even up to 3k CPUs, while keeping divides cheap on smaller systems.
 	 */
-	curr_boot = ktime_get_boot_ns() * cpus;
+	curr_boot = ktime_get_boottime_ns() * cpus;
 	diff_boot = (curr_boot - activity_data->last_boot) >> 16;
 	diff_used = (curr_used - activity_data->last_used) >> 16;
 	activity_data->last_boot = curr_boot;
diff --git a/drivers/leds/trigger/ledtrig-audio.c b/drivers/leds/trigger/ledtrig-audio.c
new file mode 100644
index 0000000..f76621e
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-audio.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Audio Mute LED trigger
+//
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+
+static struct led_trigger *ledtrig_audio[NUM_AUDIO_LEDS];
+static enum led_brightness audio_state[NUM_AUDIO_LEDS];
+
+enum led_brightness ledtrig_audio_get(enum led_audio type)
+{
+	return audio_state[type];
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_get);
+
+void ledtrig_audio_set(enum led_audio type, enum led_brightness state)
+{
+	audio_state[type] = state;
+	led_trigger_event(ledtrig_audio[type], state);
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_set);
+
+static int __init ledtrig_audio_init(void)
+{
+	led_trigger_register_simple("audio-mute",
+				    &ledtrig_audio[LED_AUDIO_MUTE]);
+	led_trigger_register_simple("audio-micmute",
+				    &ledtrig_audio[LED_AUDIO_MICMUTE]);
+	return 0;
+}
+module_init(ledtrig_audio_init);
+
+static void __exit ledtrig_audio_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MUTE]);
+	led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MICMUTE]);
+}
+module_exit(ledtrig_audio_exit);
+
+MODULE_DESCRIPTION("LED trigger for audio mute control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
index c2b57be..487577d 100644
--- a/drivers/leds/trigger/ledtrig-backlight.c
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Backlight emulation LED trigger
  *
  * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it>
  * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/trigger/ledtrig-camera.c b/drivers/leds/trigger/ledtrig-camera.c
index 091a09a..ab1c410 100644
--- a/drivers/leds/trigger/ledtrig-camera.c
+++ b/drivers/leds/trigger/ledtrig-camera.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Camera Flash and Torch On/Off Trigger
  *
@@ -6,10 +7,6 @@
  * Copyright 2013 Texas Instruments
  *
  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/trigger/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c
index 66a6260..869976d 100644
--- a/drivers/leds/trigger/ledtrig-cpu.c
+++ b/drivers/leds/trigger/ledtrig-cpu.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ledtrig-cpu.c - LED trigger based on CPU activity
  *
@@ -12,11 +13,6 @@
  *
  * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
  * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/trigger/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
index 7f6d921..8207f85 100644
--- a/drivers/leds/trigger/ledtrig-default-on.c
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Kernel Default ON Trigger
  *
  * Copyright 2008 Nick Forbes <nick.forbes@incepta.com>
  *
  * Based on Richard Purdie's ledtrig-timer.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/trigger/ledtrig-disk.c b/drivers/leds/trigger/ledtrig-disk.c
index 9816b0d..0741910 100644
--- a/drivers/leds/trigger/ledtrig-disk.c
+++ b/drivers/leds/trigger/ledtrig-disk.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Disk Activity Trigger
  *
  * Copyright 2006 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index ed0db8e..dc64679 100644
--- a/drivers/leds/trigger/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ledtrig-gio.c - LED Trigger Based on GPIO events
  *
  * Copyright 2009 Felipe Balbi <me@felipebalbi.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -134,10 +131,10 @@
 	if (gpio_data->gpio == gpio)
 		return n;
 
-	if (!gpio) {
-		if (gpio_data->gpio != 0)
+	if (!gpio_is_valid(gpio)) {
+		if (gpio_is_valid(gpio_data->gpio))
 			free_irq(gpio_to_irq(gpio_data->gpio), led);
-		gpio_data->gpio = 0;
+		gpio_data->gpio = gpio;
 		return n;
 	}
 
@@ -147,7 +144,7 @@
 	if (ret) {
 		dev_err(dev, "request_irq failed with error %d\n", ret);
 	} else {
-		if (gpio_data->gpio != 0)
+		if (gpio_is_valid(gpio_data->gpio))
 			free_irq(gpio_to_irq(gpio_data->gpio), led);
 		gpio_data->gpio = gpio;
 		/* After changing the GPIO, we need to update the LED. */
@@ -175,6 +172,8 @@
 		return -ENOMEM;
 
 	gpio_data->led = led;
+	gpio_data->gpio = -ENOENT;
+
 	led_set_trigger_data(led, gpio_data);
 
 	return 0;
@@ -184,7 +183,7 @@
 {
 	struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
 
-	if (gpio_data->gpio != 0)
+	if (gpio_is_valid(gpio_data->gpio))
 		free_irq(gpio_to_irq(gpio_data->gpio), led);
 	kfree(gpio_data);
 }
diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
index 7a2b12e..36b6709 100644
--- a/drivers/leds/trigger/ledtrig-heartbeat.c
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Heartbeat Trigger
  *
@@ -5,10 +6,6 @@
  *
  * Based on Richard Purdie's ledtrig-timer.c and some arch's
  * CONFIG_HEARTBEAT code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/leds/trigger/ledtrig-mtd.c b/drivers/leds/trigger/ledtrig-mtd.c
index 99b5b0a..8fa763c 100644
--- a/drivers/leds/trigger/ledtrig-mtd.c
+++ b/drivers/leds/trigger/ledtrig-mtd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED MTD trigger
  *
@@ -8,11 +9,6 @@
  * Copyright 2006 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 3dd3ed4..136f86a 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -122,7 +122,8 @@
 		trigger_data->net_dev = NULL;
 	}
 
-	strncpy(trigger_data->device_name, buf, size);
+	memcpy(trigger_data->device_name, buf, size);
+	trigger_data->device_name[size] = 0;
 	if (size > 0 && trigger_data->device_name[size - 1] == '\n')
 		trigger_data->device_name[size - 1] = 0;
 
@@ -301,11 +302,11 @@
 		container_of(nb, struct led_netdev_data, notifier);
 
 	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
-	    && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
-	    && evt != NETDEV_CHANGENAME)
+	    && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
 		return NOTIFY_DONE;
 
-	if (strcmp(dev->name, trigger_data->device_name))
+	if (!(dev == trigger_data->net_dev ||
+	      (evt == NETDEV_REGISTER && !strcmp(dev->name, trigger_data->device_name))))
 		return NOTIFY_DONE;
 
 	cancel_delayed_work_sync(&trigger_data->work);
@@ -320,12 +321,9 @@
 		dev_hold(dev);
 		trigger_data->net_dev = dev;
 		break;
-	case NETDEV_CHANGENAME:
 	case NETDEV_UNREGISTER:
-		if (trigger_data->net_dev) {
-			dev_put(trigger_data->net_dev);
-			trigger_data->net_dev = NULL;
-		}
+		dev_put(trigger_data->net_dev);
+		trigger_data->net_dev = NULL;
 		break;
 	case NETDEV_UP:
 	case NETDEV_CHANGE:
diff --git a/drivers/leds/trigger/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
index 95c9be4..bee3bd4 100644
--- a/drivers/leds/trigger/ledtrig-oneshot.c
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * One-shot LED Trigger
  *
  * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com>
  *
  * Based on ledtrig-timer.c by Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -130,6 +127,34 @@
 };
 ATTRIBUTE_GROUPS(oneshot_trig);
 
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	u32 *pattern;
+	unsigned int size = 0;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		goto out_default;
+
+	if (size != 2) {
+		dev_warn(led_cdev->dev,
+			 "Expected 2 but got %u values for delays pattern\n",
+			 size);
+		goto out_default;
+	}
+
+	led_cdev->blink_delay_on = pattern[0];
+	led_cdev->blink_delay_off = pattern[1];
+	kfree(pattern);
+
+	return;
+
+out_default:
+	kfree(pattern);
+	led_cdev->blink_delay_on = DEFAULT_DELAY;
+	led_cdev->blink_delay_off = DEFAULT_DELAY;
+}
+
 static int oneshot_trig_activate(struct led_classdev *led_cdev)
 {
 	struct oneshot_trig_data *oneshot_data;
@@ -140,8 +165,14 @@
 
 	led_set_trigger_data(led_cdev, oneshot_data);
 
-	led_cdev->blink_delay_on = DEFAULT_DELAY;
-	led_cdev->blink_delay_off = DEFAULT_DELAY;
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
 
 	return 0;
 }
diff --git a/drivers/leds/trigger/ledtrig-panic.c b/drivers/leds/trigger/ledtrig-panic.c
index d735526..5751cd0 100644
--- a/drivers/leds/trigger/ledtrig-panic.c
+++ b/drivers/leds/trigger/ledtrig-panic.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Kernel Panic LED Trigger
  *
  * Copyright 2016 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c
new file mode 100644
index 0000000..718729c
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * LED pattern trigger
+ *
+ * Idea discussed with Pavel Machek. Raphael Teysseyre implemented
+ * the first version, Baolin Wang simplified and improved the approach.
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+
+#define MAX_PATTERNS		1024
+/*
+ * When doing gradual dimming, the led brightness will be updated
+ * every 50 milliseconds.
+ */
+#define UPDATE_INTERVAL		50
+
+struct pattern_trig_data {
+	struct led_classdev *led_cdev;
+	struct led_pattern patterns[MAX_PATTERNS];
+	struct led_pattern *curr;
+	struct led_pattern *next;
+	struct mutex lock;
+	u32 npatterns;
+	int repeat;
+	int last_repeat;
+	int delta_t;
+	bool is_indefinite;
+	bool is_hw_pattern;
+	struct timer_list timer;
+};
+
+static void pattern_trig_update_patterns(struct pattern_trig_data *data)
+{
+	data->curr = data->next;
+	if (!data->is_indefinite && data->curr == data->patterns)
+		data->repeat--;
+
+	if (data->next == data->patterns + data->npatterns - 1)
+		data->next = data->patterns;
+	else
+		data->next++;
+
+	data->delta_t = 0;
+}
+
+static int pattern_trig_compute_brightness(struct pattern_trig_data *data)
+{
+	int step_brightness;
+
+	/*
+	 * If current tuple's duration is less than the dimming interval,
+	 * we should treat it as a step change of brightness instead of
+	 * doing gradual dimming.
+	 */
+	if (data->delta_t == 0 || data->curr->delta_t < UPDATE_INTERVAL)
+		return data->curr->brightness;
+
+	step_brightness = abs(data->next->brightness - data->curr->brightness);
+	step_brightness = data->delta_t * step_brightness / data->curr->delta_t;
+
+	if (data->next->brightness > data->curr->brightness)
+		return data->curr->brightness + step_brightness;
+	else
+		return data->curr->brightness - step_brightness;
+}
+
+static void pattern_trig_timer_function(struct timer_list *t)
+{
+	struct pattern_trig_data *data = from_timer(data, t, timer);
+
+	for (;;) {
+		if (!data->is_indefinite && !data->repeat)
+			break;
+
+		if (data->curr->brightness == data->next->brightness) {
+			/* Step change of brightness */
+			led_set_brightness(data->led_cdev,
+					   data->curr->brightness);
+			mod_timer(&data->timer,
+				  jiffies + msecs_to_jiffies(data->curr->delta_t));
+			if (!data->next->delta_t) {
+				/* Skip the tuple with zero duration */
+				pattern_trig_update_patterns(data);
+			}
+			/* Select next tuple */
+			pattern_trig_update_patterns(data);
+		} else {
+			/* Gradual dimming */
+
+			/*
+			 * If the accumulation time is larger than current
+			 * tuple's duration, we should go next one and re-check
+			 * if we repeated done.
+			 */
+			if (data->delta_t > data->curr->delta_t) {
+				pattern_trig_update_patterns(data);
+				continue;
+			}
+
+			led_set_brightness(data->led_cdev,
+					   pattern_trig_compute_brightness(data));
+			mod_timer(&data->timer,
+				  jiffies + msecs_to_jiffies(UPDATE_INTERVAL));
+
+			/* Accumulate the gradual dimming time */
+			data->delta_t += UPDATE_INTERVAL;
+		}
+
+		break;
+	}
+}
+
+static int pattern_trig_start_pattern(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	if (!data->npatterns)
+		return 0;
+
+	if (data->is_hw_pattern) {
+		return led_cdev->pattern_set(led_cdev, data->patterns,
+					     data->npatterns, data->repeat);
+	}
+
+	/* At least 2 tuples for software pattern. */
+	if (data->npatterns < 2)
+		return -EINVAL;
+
+	data->delta_t = 0;
+	data->curr = data->patterns;
+	data->next = data->patterns + 1;
+	data->timer.expires = jiffies;
+	add_timer(&data->timer);
+
+	return 0;
+}
+
+static ssize_t repeat_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int repeat;
+
+	mutex_lock(&data->lock);
+
+	repeat = data->last_repeat;
+
+	mutex_unlock(&data->lock);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", repeat);
+}
+
+static ssize_t repeat_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int err, res;
+
+	err = kstrtos32(buf, 10, &res);
+	if (err)
+		return err;
+
+	/* Number 0 and negative numbers except -1 are invalid. */
+	if (res < -1 || res == 0)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	del_timer_sync(&data->timer);
+
+	if (data->is_hw_pattern)
+		led_cdev->pattern_clear(led_cdev);
+
+	data->last_repeat = data->repeat = res;
+	/* -1 means repeat indefinitely */
+	if (data->repeat == -1)
+		data->is_indefinite = true;
+	else
+		data->is_indefinite = false;
+
+	err = pattern_trig_start_pattern(led_cdev);
+
+	mutex_unlock(&data->lock);
+	return err < 0 ? err : count;
+}
+
+static DEVICE_ATTR_RW(repeat);
+
+static ssize_t pattern_trig_show_patterns(struct pattern_trig_data *data,
+					  char *buf, bool hw_pattern)
+{
+	ssize_t count = 0;
+	int i;
+
+	mutex_lock(&data->lock);
+
+	if (!data->npatterns || (data->is_hw_pattern ^ hw_pattern))
+		goto out;
+
+	for (i = 0; i < data->npatterns; i++) {
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "%d %u ",
+				   data->patterns[i].brightness,
+				   data->patterns[i].delta_t);
+	}
+
+	buf[count - 1] = '\n';
+
+out:
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static int pattern_trig_store_patterns_string(struct pattern_trig_data *data,
+					      const char *buf, size_t count)
+{
+	int ccount, cr, offset = 0;
+
+	while (offset < count - 1 && data->npatterns < MAX_PATTERNS) {
+		cr = 0;
+		ccount = sscanf(buf + offset, "%d %u %n",
+				&data->patterns[data->npatterns].brightness,
+				&data->patterns[data->npatterns].delta_t, &cr);
+		if (ccount != 2) {
+			data->npatterns = 0;
+			return -EINVAL;
+		}
+
+		offset += cr;
+		data->npatterns++;
+	}
+
+	return 0;
+}
+
+static int pattern_trig_store_patterns_int(struct pattern_trig_data *data,
+					   const u32 *buf, size_t count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i += 2) {
+		data->patterns[data->npatterns].brightness = buf[i];
+		data->patterns[data->npatterns].delta_t = buf[i + 1];
+		data->npatterns++;
+	}
+
+	return 0;
+}
+
+static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev,
+					   const char *buf, const u32 *buf_int,
+					   size_t count, bool hw_pattern)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int err = 0;
+
+	mutex_lock(&data->lock);
+
+	del_timer_sync(&data->timer);
+
+	if (data->is_hw_pattern)
+		led_cdev->pattern_clear(led_cdev);
+
+	data->is_hw_pattern = hw_pattern;
+	data->npatterns = 0;
+
+	if (buf)
+		err = pattern_trig_store_patterns_string(data, buf, count);
+	else
+		err = pattern_trig_store_patterns_int(data, buf_int, count);
+	if (err)
+		goto out;
+
+	err = pattern_trig_start_pattern(led_cdev);
+	if (err)
+		data->npatterns = 0;
+
+out:
+	mutex_unlock(&data->lock);
+	return err < 0 ? err : count;
+}
+
+static ssize_t pattern_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	return pattern_trig_show_patterns(data, buf, false);
+}
+
+static ssize_t pattern_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return pattern_trig_store_patterns(led_cdev, buf, NULL, count, false);
+}
+
+static DEVICE_ATTR_RW(pattern);
+
+static ssize_t hw_pattern_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	return pattern_trig_show_patterns(data, buf, true);
+}
+
+static ssize_t hw_pattern_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return pattern_trig_store_patterns(led_cdev, buf, NULL, count, true);
+}
+
+static DEVICE_ATTR_RW(hw_pattern);
+
+static umode_t pattern_trig_attrs_mode(struct kobject *kobj,
+				       struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	if (attr == &dev_attr_repeat.attr || attr == &dev_attr_pattern.attr)
+		return attr->mode;
+	else if (attr == &dev_attr_hw_pattern.attr && led_cdev->pattern_set)
+		return attr->mode;
+
+	return 0;
+}
+
+static struct attribute *pattern_trig_attrs[] = {
+	&dev_attr_pattern.attr,
+	&dev_attr_hw_pattern.attr,
+	&dev_attr_repeat.attr,
+	NULL
+};
+
+static const struct attribute_group pattern_trig_group = {
+	.attrs = pattern_trig_attrs,
+	.is_visible = pattern_trig_attrs_mode,
+};
+
+static const struct attribute_group *pattern_trig_groups[] = {
+	&pattern_trig_group,
+	NULL,
+};
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	unsigned int size = 0;
+	u32 *pattern;
+	int err;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		return;
+
+	if (size % 2) {
+		dev_warn(led_cdev->dev, "Expected pattern of tuples\n");
+		goto out;
+	}
+
+	err = pattern_trig_store_patterns(led_cdev, NULL, pattern, size, false);
+	if (err < 0)
+		dev_warn(led_cdev->dev,
+			 "Pattern initialization failed with error %d\n", err);
+
+out:
+	kfree(pattern);
+}
+
+static int pattern_trig_activate(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (!!led_cdev->pattern_set ^ !!led_cdev->pattern_clear) {
+		dev_warn(led_cdev->dev,
+			 "Hardware pattern ops validation failed\n");
+		led_cdev->pattern_set = NULL;
+		led_cdev->pattern_clear = NULL;
+	}
+
+	data->is_indefinite = true;
+	data->last_repeat = -1;
+	mutex_init(&data->lock);
+	data->led_cdev = led_cdev;
+	led_set_trigger_data(led_cdev, data);
+	timer_setup(&data->timer, pattern_trig_timer_function, 0);
+	led_cdev->activated = true;
+
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
+
+	return 0;
+}
+
+static void pattern_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	if (!led_cdev->activated)
+		return;
+
+	if (led_cdev->pattern_clear)
+		led_cdev->pattern_clear(led_cdev);
+
+	del_timer_sync(&data->timer);
+
+	led_set_brightness(led_cdev, LED_OFF);
+	kfree(data);
+	led_cdev->activated = false;
+}
+
+static struct led_trigger pattern_led_trigger = {
+	.name = "pattern",
+	.activate = pattern_trig_activate,
+	.deactivate = pattern_trig_deactivate,
+	.groups = pattern_trig_groups,
+};
+
+static int __init pattern_trig_init(void)
+{
+	return led_trigger_register(&pattern_led_trigger);
+}
+
+static void __exit pattern_trig_exit(void)
+{
+	led_trigger_unregister(&pattern_led_trigger);
+}
+
+module_init(pattern_trig_init);
+module_exit(pattern_trig_exit);
+
+MODULE_AUTHOR("Raphael Teysseyre <rteysseyre@gmail.com");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org");
+MODULE_DESCRIPTION("LED Pattern trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
index 7c14983..34a6860 100644
--- a/drivers/leds/trigger/ledtrig-timer.c
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * LED Kernel Timer Trigger
  *
  * Copyright 2005-2006 Openedhand Ltd.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
@@ -15,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/ctype.h>
+#include <linux/slab.h>
 #include <linux/leds.h>
 
 static ssize_t led_delay_on_show(struct device *dev,
@@ -77,8 +75,46 @@
 };
 ATTRIBUTE_GROUPS(timer_trig);
 
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	u32 *pattern;
+	unsigned int size = 0;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		return;
+
+	if (size != 2) {
+		dev_warn(led_cdev->dev,
+			 "Expected 2 but got %u values for delays pattern\n",
+			 size);
+		goto out;
+	}
+
+	led_cdev->blink_delay_on = pattern[0];
+	led_cdev->blink_delay_off = pattern[1];
+	/* led_blink_set() called by caller */
+
+out:
+	kfree(pattern);
+}
+
 static int timer_trig_activate(struct led_classdev *led_cdev)
 {
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
+
+	/*
+	 * If "set brightness to 0" is pending in workqueue, we don't
+	 * want that to be reordered after blink_set()
+	 */
+	flush_work(&led_cdev->set_brightness_work);
 	led_blink_set(led_cdev, &led_cdev->blink_delay_on,
 		      &led_cdev->blink_delay_off);
 
diff --git a/drivers/leds/trigger/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
index a80bb82..8063518 100644
--- a/drivers/leds/trigger/ledtrig-transient.c
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -3,7 +3,7 @@
 // LED Kernel Transient Trigger
 //
 // Transient trigger allows one shot timer activation. Please refer to
-// Documentation/leds/ledtrig-transient.txt for details
+// Documentation/leds/ledtrig-transient.rst for details
 // Copyright (C) 2012 Shuah Khan <shuahkhan@gmail.com>
 //
 // Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
diff --git a/drivers/leds/uleds.c b/drivers/leds/uleds.c
index 0c43bfa..7320337 100644
--- a/drivers/leds/uleds.c
+++ b/drivers/leds/uleds.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Userspace driver for the LED subsystem
  *
  * Copyright (C) 2016 David Lechner <david@lechnology.com>
  *
  * Based on uinput.c: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/fs.h>
 #include <linux/init.h>
@@ -74,7 +65,7 @@
 	udev->state = ULEDS_STATE_UNKNOWN;
 
 	file->private_data = udev;
-	nonseekable_open(inode, file);
+	stream_open(inode, file);
 
 	return 0;
 }