Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * OHCI HCD (Host Controller Driver) for USB. |
| 4 | * |
| 5 | * TI DA8xx (OMAP-L1x) Bus Glue |
| 6 | * |
| 7 | * Derived from: ohci-omap.c and ohci-s3c2410.c |
| 8 | * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> |
| 9 | */ |
| 10 | |
| 11 | #include <linux/clk.h> |
| 12 | #include <linux/io.h> |
| 13 | #include <linux/interrupt.h> |
| 14 | #include <linux/jiffies.h> |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/phy/phy.h> |
| 19 | #include <linux/platform_data/usb-davinci.h> |
| 20 | #include <linux/regulator/consumer.h> |
| 21 | #include <linux/usb.h> |
| 22 | #include <linux/usb/hcd.h> |
| 23 | #include <asm/unaligned.h> |
| 24 | |
| 25 | #include "ohci.h" |
| 26 | |
| 27 | #define DRIVER_DESC "DA8XX" |
| 28 | #define DRV_NAME "ohci-da8xx" |
| 29 | |
| 30 | static struct hc_driver __read_mostly ohci_da8xx_hc_driver; |
| 31 | |
| 32 | static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, |
| 33 | u16 wValue, u16 wIndex, char *buf, u16 wLength); |
| 34 | static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); |
| 35 | |
| 36 | struct da8xx_ohci_hcd { |
| 37 | struct usb_hcd *hcd; |
| 38 | struct clk *usb11_clk; |
| 39 | struct phy *usb11_phy; |
| 40 | struct regulator *vbus_reg; |
| 41 | struct notifier_block nb; |
| 42 | unsigned int reg_enabled; |
| 43 | }; |
| 44 | |
| 45 | #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) |
| 46 | |
| 47 | /* Over-current indicator change bitmask */ |
| 48 | static volatile u16 ocic_mask; |
| 49 | |
| 50 | static int ohci_da8xx_enable(struct usb_hcd *hcd) |
| 51 | { |
| 52 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 53 | int ret; |
| 54 | |
| 55 | ret = clk_prepare_enable(da8xx_ohci->usb11_clk); |
| 56 | if (ret) |
| 57 | return ret; |
| 58 | |
| 59 | ret = phy_init(da8xx_ohci->usb11_phy); |
| 60 | if (ret) |
| 61 | goto err_phy_init; |
| 62 | |
| 63 | ret = phy_power_on(da8xx_ohci->usb11_phy); |
| 64 | if (ret) |
| 65 | goto err_phy_power_on; |
| 66 | |
| 67 | return 0; |
| 68 | |
| 69 | err_phy_power_on: |
| 70 | phy_exit(da8xx_ohci->usb11_phy); |
| 71 | err_phy_init: |
| 72 | clk_disable_unprepare(da8xx_ohci->usb11_clk); |
| 73 | |
| 74 | return ret; |
| 75 | } |
| 76 | |
| 77 | static void ohci_da8xx_disable(struct usb_hcd *hcd) |
| 78 | { |
| 79 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 80 | |
| 81 | phy_power_off(da8xx_ohci->usb11_phy); |
| 82 | phy_exit(da8xx_ohci->usb11_phy); |
| 83 | clk_disable_unprepare(da8xx_ohci->usb11_clk); |
| 84 | } |
| 85 | |
| 86 | static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) |
| 87 | { |
| 88 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 89 | struct device *dev = hcd->self.controller; |
| 90 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 91 | int ret; |
| 92 | |
| 93 | if (hub && hub->set_power) |
| 94 | return hub->set_power(1, on); |
| 95 | |
| 96 | if (!da8xx_ohci->vbus_reg) |
| 97 | return 0; |
| 98 | |
| 99 | if (on && !da8xx_ohci->reg_enabled) { |
| 100 | ret = regulator_enable(da8xx_ohci->vbus_reg); |
| 101 | if (ret) { |
| 102 | dev_err(dev, "Failed to enable regulator: %d\n", ret); |
| 103 | return ret; |
| 104 | } |
| 105 | da8xx_ohci->reg_enabled = 1; |
| 106 | |
| 107 | } else if (!on && da8xx_ohci->reg_enabled) { |
| 108 | ret = regulator_disable(da8xx_ohci->vbus_reg); |
| 109 | if (ret) { |
| 110 | dev_err(dev, "Failed to disable regulator: %d\n", ret); |
| 111 | return ret; |
| 112 | } |
| 113 | da8xx_ohci->reg_enabled = 0; |
| 114 | } |
| 115 | |
| 116 | return 0; |
| 117 | } |
| 118 | |
| 119 | static int ohci_da8xx_get_power(struct usb_hcd *hcd) |
| 120 | { |
| 121 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 122 | struct device *dev = hcd->self.controller; |
| 123 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 124 | |
| 125 | if (hub && hub->get_power) |
| 126 | return hub->get_power(1); |
| 127 | |
| 128 | if (da8xx_ohci->vbus_reg) |
| 129 | return regulator_is_enabled(da8xx_ohci->vbus_reg); |
| 130 | |
| 131 | return 1; |
| 132 | } |
| 133 | |
| 134 | static int ohci_da8xx_get_oci(struct usb_hcd *hcd) |
| 135 | { |
| 136 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 137 | struct device *dev = hcd->self.controller; |
| 138 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 139 | unsigned int flags; |
| 140 | int ret; |
| 141 | |
| 142 | if (hub && hub->get_oci) |
| 143 | return hub->get_oci(1); |
| 144 | |
| 145 | if (!da8xx_ohci->vbus_reg) |
| 146 | return 0; |
| 147 | |
| 148 | ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); |
| 149 | if (ret) |
| 150 | return ret; |
| 151 | |
| 152 | if (flags & REGULATOR_ERROR_OVER_CURRENT) |
| 153 | return 1; |
| 154 | |
| 155 | return 0; |
| 156 | } |
| 157 | |
| 158 | static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) |
| 159 | { |
| 160 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 161 | struct device *dev = hcd->self.controller; |
| 162 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 163 | |
| 164 | if (hub && hub->set_power) |
| 165 | return 1; |
| 166 | |
| 167 | if (da8xx_ohci->vbus_reg) |
| 168 | return 1; |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static int ohci_da8xx_has_oci(struct usb_hcd *hcd) |
| 174 | { |
| 175 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 176 | struct device *dev = hcd->self.controller; |
| 177 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 178 | |
| 179 | if (hub && hub->get_oci) |
| 180 | return 1; |
| 181 | |
| 182 | if (da8xx_ohci->vbus_reg) |
| 183 | return 1; |
| 184 | |
| 185 | return 0; |
| 186 | } |
| 187 | |
| 188 | static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) |
| 189 | { |
| 190 | struct device *dev = hcd->self.controller; |
| 191 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 192 | |
| 193 | if (hub && hub->potpgt) |
| 194 | return 1; |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | /* |
| 200 | * Handle the port over-current indicator change. |
| 201 | */ |
| 202 | static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, |
| 203 | unsigned port) |
| 204 | { |
| 205 | ocic_mask |= 1 << port; |
| 206 | |
| 207 | /* Once over-current is detected, the port needs to be powered down */ |
| 208 | if (hub->get_oci(port) > 0) |
| 209 | hub->set_power(port, 0); |
| 210 | } |
| 211 | |
| 212 | static int ohci_da8xx_regulator_event(struct notifier_block *nb, |
| 213 | unsigned long event, void *data) |
| 214 | { |
| 215 | struct da8xx_ohci_hcd *da8xx_ohci = |
| 216 | container_of(nb, struct da8xx_ohci_hcd, nb); |
| 217 | |
| 218 | if (event & REGULATOR_EVENT_OVER_CURRENT) { |
| 219 | ocic_mask |= 1 << 1; |
| 220 | ohci_da8xx_set_power(da8xx_ohci->hcd, 0); |
| 221 | } |
| 222 | |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static int ohci_da8xx_register_notify(struct usb_hcd *hcd) |
| 227 | { |
| 228 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); |
| 229 | struct device *dev = hcd->self.controller; |
| 230 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 231 | int ret = 0; |
| 232 | |
| 233 | if (hub && hub->ocic_notify) { |
| 234 | ret = hub->ocic_notify(ohci_da8xx_ocic_handler); |
| 235 | } else if (da8xx_ohci->vbus_reg) { |
| 236 | da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; |
| 237 | ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, |
| 238 | &da8xx_ohci->nb); |
| 239 | } |
| 240 | |
| 241 | if (ret) |
| 242 | dev_err(dev, "Failed to register notifier: %d\n", ret); |
| 243 | |
| 244 | return ret; |
| 245 | } |
| 246 | |
| 247 | static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) |
| 248 | { |
| 249 | struct device *dev = hcd->self.controller; |
| 250 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 251 | |
| 252 | if (hub && hub->ocic_notify) |
| 253 | hub->ocic_notify(NULL); |
| 254 | } |
| 255 | |
| 256 | static int ohci_da8xx_reset(struct usb_hcd *hcd) |
| 257 | { |
| 258 | struct device *dev = hcd->self.controller; |
| 259 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); |
| 260 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| 261 | int result; |
| 262 | u32 rh_a; |
| 263 | |
| 264 | dev_dbg(dev, "starting USB controller\n"); |
| 265 | |
| 266 | result = ohci_da8xx_enable(hcd); |
| 267 | if (result < 0) |
| 268 | return result; |
| 269 | |
| 270 | /* |
| 271 | * DA8xx only have 1 port connected to the pins but the HC root hub |
| 272 | * register A reports 2 ports, thus we'll have to override it... |
| 273 | */ |
| 274 | ohci->num_ports = 1; |
| 275 | |
| 276 | result = ohci_setup(hcd); |
| 277 | if (result < 0) { |
| 278 | ohci_da8xx_disable(hcd); |
| 279 | return result; |
| 280 | } |
| 281 | |
| 282 | /* |
| 283 | * Since we're providing a board-specific root hub port power control |
| 284 | * and over-current reporting, we have to override the HC root hub A |
| 285 | * register's default value, so that ohci_hub_control() could return |
| 286 | * the correct hub descriptor... |
| 287 | */ |
| 288 | rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); |
| 289 | if (ohci_da8xx_has_set_power(hcd)) { |
| 290 | rh_a &= ~RH_A_NPS; |
| 291 | rh_a |= RH_A_PSM; |
| 292 | } |
| 293 | if (ohci_da8xx_has_oci(hcd)) { |
| 294 | rh_a &= ~RH_A_NOCP; |
| 295 | rh_a |= RH_A_OCPM; |
| 296 | } |
| 297 | if (ohci_da8xx_has_potpgt(hcd)) { |
| 298 | rh_a &= ~RH_A_POTPGT; |
| 299 | rh_a |= hub->potpgt << 24; |
| 300 | } |
| 301 | ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); |
| 302 | |
| 303 | return result; |
| 304 | } |
| 305 | |
| 306 | /* |
| 307 | * Update the status data from the hub with the over-current indicator change. |
| 308 | */ |
| 309 | static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) |
| 310 | { |
| 311 | int length = orig_ohci_hub_status_data(hcd, buf); |
| 312 | |
| 313 | /* See if we have OCIC bit set on port 1 */ |
| 314 | if (ocic_mask & (1 << 1)) { |
| 315 | dev_dbg(hcd->self.controller, "over-current indicator change " |
| 316 | "on port 1\n"); |
| 317 | |
| 318 | if (!length) |
| 319 | length = 1; |
| 320 | |
| 321 | buf[0] |= 1 << 1; |
| 322 | } |
| 323 | return length; |
| 324 | } |
| 325 | |
| 326 | /* |
| 327 | * Look at the control requests to the root hub and see if we need to override. |
| 328 | */ |
| 329 | static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, |
| 330 | u16 wIndex, char *buf, u16 wLength) |
| 331 | { |
| 332 | struct device *dev = hcd->self.controller; |
| 333 | int temp; |
| 334 | |
| 335 | switch (typeReq) { |
| 336 | case GetPortStatus: |
| 337 | /* Check the port number */ |
| 338 | if (wIndex != 1) |
| 339 | break; |
| 340 | |
| 341 | dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); |
| 342 | |
| 343 | temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); |
| 344 | |
| 345 | /* The port power status (PPS) bit defaults to 1 */ |
| 346 | if (!ohci_da8xx_get_power(hcd)) |
| 347 | temp &= ~RH_PS_PPS; |
| 348 | |
| 349 | /* The port over-current indicator (POCI) bit is always 0 */ |
| 350 | if (ohci_da8xx_get_oci(hcd) > 0) |
| 351 | temp |= RH_PS_POCI; |
| 352 | |
| 353 | /* The over-current indicator change (OCIC) bit is 0 too */ |
| 354 | if (ocic_mask & (1 << wIndex)) |
| 355 | temp |= RH_PS_OCIC; |
| 356 | |
| 357 | put_unaligned(cpu_to_le32(temp), (__le32 *)buf); |
| 358 | return 0; |
| 359 | case SetPortFeature: |
| 360 | temp = 1; |
| 361 | goto check_port; |
| 362 | case ClearPortFeature: |
| 363 | temp = 0; |
| 364 | |
| 365 | check_port: |
| 366 | /* Check the port number */ |
| 367 | if (wIndex != 1) |
| 368 | break; |
| 369 | |
| 370 | switch (wValue) { |
| 371 | case USB_PORT_FEAT_POWER: |
| 372 | dev_dbg(dev, "%sPortFeature(%u): %s\n", |
| 373 | temp ? "Set" : "Clear", wIndex, "POWER"); |
| 374 | |
| 375 | return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; |
| 376 | case USB_PORT_FEAT_C_OVER_CURRENT: |
| 377 | dev_dbg(dev, "%sPortFeature(%u): %s\n", |
| 378 | temp ? "Set" : "Clear", wIndex, |
| 379 | "C_OVER_CURRENT"); |
| 380 | |
| 381 | if (temp) |
| 382 | ocic_mask |= 1 << wIndex; |
| 383 | else |
| 384 | ocic_mask &= ~(1 << wIndex); |
| 385 | return 0; |
| 386 | } |
| 387 | } |
| 388 | |
| 389 | return orig_ohci_hub_control(hcd, typeReq, wValue, |
| 390 | wIndex, buf, wLength); |
| 391 | } |
| 392 | |
| 393 | /*-------------------------------------------------------------------------*/ |
| 394 | #ifdef CONFIG_OF |
| 395 | static const struct of_device_id da8xx_ohci_ids[] = { |
| 396 | { .compatible = "ti,da830-ohci" }, |
| 397 | { } |
| 398 | }; |
| 399 | MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); |
| 400 | #endif |
| 401 | |
| 402 | static int ohci_da8xx_probe(struct platform_device *pdev) |
| 403 | { |
| 404 | struct da8xx_ohci_hcd *da8xx_ohci; |
| 405 | struct usb_hcd *hcd; |
| 406 | struct resource *mem; |
| 407 | int error, irq; |
| 408 | hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, |
| 409 | dev_name(&pdev->dev)); |
| 410 | if (!hcd) |
| 411 | return -ENOMEM; |
| 412 | |
| 413 | da8xx_ohci = to_da8xx_ohci(hcd); |
| 414 | da8xx_ohci->hcd = hcd; |
| 415 | |
| 416 | da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, NULL); |
| 417 | if (IS_ERR(da8xx_ohci->usb11_clk)) { |
| 418 | error = PTR_ERR(da8xx_ohci->usb11_clk); |
| 419 | if (error != -EPROBE_DEFER) |
| 420 | dev_err(&pdev->dev, "Failed to get clock.\n"); |
| 421 | goto err; |
| 422 | } |
| 423 | |
| 424 | da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); |
| 425 | if (IS_ERR(da8xx_ohci->usb11_phy)) { |
| 426 | error = PTR_ERR(da8xx_ohci->usb11_phy); |
| 427 | if (error != -EPROBE_DEFER) |
| 428 | dev_err(&pdev->dev, "Failed to get phy.\n"); |
| 429 | goto err; |
| 430 | } |
| 431 | |
| 432 | da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); |
| 433 | if (IS_ERR(da8xx_ohci->vbus_reg)) { |
| 434 | error = PTR_ERR(da8xx_ohci->vbus_reg); |
| 435 | if (error == -ENODEV) { |
| 436 | da8xx_ohci->vbus_reg = NULL; |
| 437 | } else if (error == -EPROBE_DEFER) { |
| 438 | goto err; |
| 439 | } else { |
| 440 | dev_err(&pdev->dev, "Failed to get regulator\n"); |
| 441 | goto err; |
| 442 | } |
| 443 | } |
| 444 | |
| 445 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 446 | hcd->regs = devm_ioremap_resource(&pdev->dev, mem); |
| 447 | if (IS_ERR(hcd->regs)) { |
| 448 | error = PTR_ERR(hcd->regs); |
| 449 | goto err; |
| 450 | } |
| 451 | hcd->rsrc_start = mem->start; |
| 452 | hcd->rsrc_len = resource_size(mem); |
| 453 | |
| 454 | irq = platform_get_irq(pdev, 0); |
| 455 | if (irq < 0) { |
| 456 | error = -ENODEV; |
| 457 | goto err; |
| 458 | } |
| 459 | |
| 460 | error = usb_add_hcd(hcd, irq, 0); |
| 461 | if (error) |
| 462 | goto err; |
| 463 | |
| 464 | device_wakeup_enable(hcd->self.controller); |
| 465 | |
| 466 | error = ohci_da8xx_register_notify(hcd); |
| 467 | if (error) |
| 468 | goto err_remove_hcd; |
| 469 | |
| 470 | return 0; |
| 471 | |
| 472 | err_remove_hcd: |
| 473 | usb_remove_hcd(hcd); |
| 474 | err: |
| 475 | usb_put_hcd(hcd); |
| 476 | return error; |
| 477 | } |
| 478 | |
| 479 | static int ohci_da8xx_remove(struct platform_device *pdev) |
| 480 | { |
| 481 | struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| 482 | |
| 483 | ohci_da8xx_unregister_notify(hcd); |
| 484 | usb_remove_hcd(hcd); |
| 485 | usb_put_hcd(hcd); |
| 486 | |
| 487 | return 0; |
| 488 | } |
| 489 | |
| 490 | #ifdef CONFIG_PM |
| 491 | static int ohci_da8xx_suspend(struct platform_device *pdev, |
| 492 | pm_message_t message) |
| 493 | { |
| 494 | struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| 495 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| 496 | bool do_wakeup = device_may_wakeup(&pdev->dev); |
| 497 | int ret; |
| 498 | |
| 499 | |
| 500 | if (time_before(jiffies, ohci->next_statechange)) |
| 501 | msleep(5); |
| 502 | ohci->next_statechange = jiffies; |
| 503 | |
| 504 | ret = ohci_suspend(hcd, do_wakeup); |
| 505 | if (ret) |
| 506 | return ret; |
| 507 | |
| 508 | ohci_da8xx_disable(hcd); |
| 509 | hcd->state = HC_STATE_SUSPENDED; |
| 510 | |
| 511 | return ret; |
| 512 | } |
| 513 | |
| 514 | static int ohci_da8xx_resume(struct platform_device *dev) |
| 515 | { |
| 516 | struct usb_hcd *hcd = platform_get_drvdata(dev); |
| 517 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| 518 | int ret; |
| 519 | |
| 520 | if (time_before(jiffies, ohci->next_statechange)) |
| 521 | msleep(5); |
| 522 | ohci->next_statechange = jiffies; |
| 523 | |
| 524 | ret = ohci_da8xx_enable(hcd); |
| 525 | if (ret) |
| 526 | return ret; |
| 527 | |
| 528 | ohci_resume(hcd, false); |
| 529 | |
| 530 | return 0; |
| 531 | } |
| 532 | #endif |
| 533 | |
| 534 | static const struct ohci_driver_overrides da8xx_overrides __initconst = { |
| 535 | .reset = ohci_da8xx_reset, |
| 536 | .extra_priv_size = sizeof(struct da8xx_ohci_hcd), |
| 537 | }; |
| 538 | |
| 539 | /* |
| 540 | * Driver definition to register with platform structure. |
| 541 | */ |
| 542 | static struct platform_driver ohci_hcd_da8xx_driver = { |
| 543 | .probe = ohci_da8xx_probe, |
| 544 | .remove = ohci_da8xx_remove, |
| 545 | .shutdown = usb_hcd_platform_shutdown, |
| 546 | #ifdef CONFIG_PM |
| 547 | .suspend = ohci_da8xx_suspend, |
| 548 | .resume = ohci_da8xx_resume, |
| 549 | #endif |
| 550 | .driver = { |
| 551 | .name = DRV_NAME, |
| 552 | .of_match_table = of_match_ptr(da8xx_ohci_ids), |
| 553 | }, |
| 554 | }; |
| 555 | |
| 556 | static int __init ohci_da8xx_init(void) |
| 557 | { |
| 558 | |
| 559 | if (usb_disabled()) |
| 560 | return -ENODEV; |
| 561 | |
| 562 | pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); |
| 563 | ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); |
| 564 | |
| 565 | /* |
| 566 | * The Davinci da8xx HW has some unusual quirks, which require |
| 567 | * da8xx-specific workarounds. We override certain hc_driver |
| 568 | * functions here to achieve that. We explicitly do not enhance |
| 569 | * ohci_driver_overrides to allow this more easily, since this |
| 570 | * is an unusual case, and we don't want to encourage others to |
| 571 | * override these functions by making it too easy. |
| 572 | */ |
| 573 | |
| 574 | orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; |
| 575 | orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; |
| 576 | |
| 577 | ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; |
| 578 | ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; |
| 579 | |
| 580 | return platform_driver_register(&ohci_hcd_da8xx_driver); |
| 581 | } |
| 582 | module_init(ohci_da8xx_init); |
| 583 | |
| 584 | static void __exit ohci_da8xx_exit(void) |
| 585 | { |
| 586 | platform_driver_unregister(&ohci_hcd_da8xx_driver); |
| 587 | } |
| 588 | module_exit(ohci_da8xx_exit); |
| 589 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 590 | MODULE_LICENSE("GPL"); |
| 591 | MODULE_ALIAS("platform:" DRV_NAME); |