blob: d418c55523a7e2115cb8ce44af9d259bd449fcde [file] [log] [blame]
Andrew Scullb4b6d4a2019-01-02 15:54:55 +00001// SPDX-License-Identifier: GPL-1.0+
2/*
3 * Renesas USB
4 *
5 * Copyright (C) 2011 Renesas Solutions Corp.
David Brazdil0f672f62019-12-10 10:32:29 +00006 * Copyright (C) 2019 Renesas Electronics Corporation
Andrew Scullb4b6d4a2019-01-02 15:54:55 +00007 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
17 *
18 */
19#ifndef RENESAS_USB_H
20#define RENESAS_USB_H
21#include <linux/notifier.h>
22#include <linux/platform_device.h>
23#include <linux/usb/ch9.h>
24
25/*
26 * module type
27 *
28 * it will be return value from get_id
29 */
30enum {
31 USBHS_HOST = 0,
32 USBHS_GADGET,
33 USBHS_MAX,
34};
35
36/*
Andrew Scullb4b6d4a2019-01-02 15:54:55 +000037 * callback functions for platform
38 *
39 * These functions are called from driver for platform
40 */
41struct renesas_usbhs_platform_callback {
42
43 /*
44 * option:
45 *
46 * Hardware init function for platform.
47 * it is called when driver was probed.
48 */
49 int (*hardware_init)(struct platform_device *pdev);
50
51 /*
52 * option:
53 *
54 * Hardware exit function for platform.
55 * it is called when driver was removed
56 */
57 int (*hardware_exit)(struct platform_device *pdev);
58
59 /*
60 * option:
61 *
62 * for board specific clock control
63 */
64 int (*power_ctrl)(struct platform_device *pdev,
65 void __iomem *base, int enable);
66
67 /*
68 * option:
69 *
70 * Phy reset for platform
71 */
72 int (*phy_reset)(struct platform_device *pdev);
73
74 /*
75 * get USB ID function
76 * - USBHS_HOST
77 * - USBHS_GADGET
78 */
79 int (*get_id)(struct platform_device *pdev);
80
81 /*
82 * get VBUS status function.
83 */
84 int (*get_vbus)(struct platform_device *pdev);
85
86 /*
87 * option:
88 *
89 * VBUS control is needed for Host
90 */
91 int (*set_vbus)(struct platform_device *pdev, int enable);
92
93 /*
94 * option:
95 * extcon notifier to set host/peripheral mode.
96 */
97 int (*notifier)(struct notifier_block *nb, unsigned long event,
98 void *data);
99};
100
101/*
102 * parameters for renesas usbhs
103 *
104 * some register needs USB chip specific parameters.
105 * This struct show it to driver
106 */
107
108struct renesas_usbhs_driver_pipe_config {
109 u8 type; /* USB_ENDPOINT_XFER_xxx */
110 u16 bufsize;
111 u8 bufnum;
112 bool double_buf;
113};
114#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf) { \
115 .type = (_type), \
116 .bufsize = (_size), \
117 .bufnum = (_num), \
118 .double_buf = (_double_buf), \
119 }
120
121struct renesas_usbhs_driver_param {
122 /*
123 * pipe settings
124 */
125 struct renesas_usbhs_driver_pipe_config *pipe_configs;
126 int pipe_size; /* pipe_configs array size */
127
128 /*
129 * option:
130 *
131 * for BUSWAIT :: BWAIT
132 * see
133 * renesas_usbhs/common.c :: usbhsc_set_buswait()
134 * */
135 int buswait_bwait;
136
137 /*
138 * option:
139 *
140 * delay time from notify_hotplug callback
141 */
142 int detection_delay; /* msec */
143
144 /*
145 * option:
146 *
147 * dma id for dmaengine
148 * The data transfer direction on D0FIFO/D1FIFO should be
149 * fixed for keeping consistency.
150 * So, the platform id settings will be..
151 * .d0_tx_id = xx_TX,
152 * .d1_rx_id = xx_RX,
153 * or
154 * .d1_tx_id = xx_TX,
155 * .d0_rx_id = xx_RX,
156 */
157 int d0_tx_id;
158 int d0_rx_id;
159 int d1_tx_id;
160 int d1_rx_id;
161 int d2_tx_id;
162 int d2_rx_id;
163 int d3_tx_id;
164 int d3_rx_id;
165
166 /*
167 * option:
168 *
169 * pio <--> dma border.
170 */
171 int pio_dma_border; /* default is 64byte */
172
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000173 /*
174 * option:
175 */
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000176 u32 has_usb_dmac:1; /* for USB-DMAC */
David Brazdil0f672f62019-12-10 10:32:29 +0000177 u32 runtime_pwctrl:1;
178 u32 has_cnen:1;
179 u32 cfifo_byte_addr:1; /* CFIFO is byte addressable */
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000180#define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */
David Brazdil0f672f62019-12-10 10:32:29 +0000181 u32 multi_clks:1;
182 u32 has_new_pipe_configs:1;
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000183};
184
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000185/*
186 * option:
187 *
188 * platform information for renesas_usbhs driver.
189 */
190struct renesas_usbhs_platform_info {
191 /*
192 * option:
193 *
194 * platform set these functions before
195 * call platform_add_devices if needed
196 */
197 struct renesas_usbhs_platform_callback platform_callback;
198
199 /*
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000200 * option:
201 *
202 * driver use these param for some register
203 */
204 struct renesas_usbhs_driver_param driver_param;
205};
206
207/*
208 * macro for platform
209 */
210#define renesas_usbhs_get_info(pdev)\
211 ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
Andrew Scullb4b6d4a2019-01-02 15:54:55 +0000212#endif /* RENESAS_USB_H */