David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018 Samsung Electronics Co., Ltd |
| 4 | * |
| 5 | * Authors: |
| 6 | * Andrzej Hajda <a.hajda@samsung.com> |
| 7 | * Maciej Purski <m.purski@samsung.com> |
| 8 | */ |
| 9 | |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/gpio/consumer.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/of_graph.h> |
| 14 | #include <linux/regulator/consumer.h> |
| 15 | |
| 16 | #include <video/mipi_display.h> |
| 17 | |
| 18 | #include <drm/drm_atomic_helper.h> |
| 19 | #include <drm/drm_crtc.h> |
| 20 | #include <drm/drm_fb_helper.h> |
| 21 | #include <drm/drm_mipi_dsi.h> |
| 22 | #include <drm/drm_of.h> |
| 23 | #include <drm/drm_panel.h> |
| 24 | #include <drm/drm_print.h> |
| 25 | #include <drm/drm_probe_helper.h> |
| 26 | |
| 27 | #define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) |
| 28 | #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) |
| 29 | |
| 30 | /* PPI layer registers */ |
| 31 | #define PPI_STARTPPI 0x0104 /* START control bit */ |
| 32 | #define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */ |
| 33 | #define PPI_LANEENABLE 0x0134 /* Enables each lane */ |
| 34 | #define PPI_TX_RX_TA 0x013C /* BTA timing parameters */ |
| 35 | #define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */ |
| 36 | #define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */ |
| 37 | #define PPI_D2S_CLRSIPOCOUNT 0x016C /* Assertion timer for Lane 2 */ |
| 38 | #define PPI_D3S_CLRSIPOCOUNT 0x0170 /* Assertion timer for Lane 3 */ |
| 39 | #define PPI_START_FUNCTION 1 |
| 40 | |
| 41 | /* DSI layer registers */ |
| 42 | #define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */ |
| 43 | #define DSI_LANEENABLE 0x0210 /* Enables each lane */ |
| 44 | #define DSI_RX_START 1 |
| 45 | |
| 46 | /* Video path registers */ |
| 47 | #define VP_CTRL 0x0450 /* Video Path Control */ |
| 48 | #define VP_CTRL_MSF(v) FLD_VAL(v, 0, 0) /* Magic square in RGB666 */ |
| 49 | #define VP_CTRL_VTGEN(v) FLD_VAL(v, 4, 4) /* Use chip clock for timing */ |
| 50 | #define VP_CTRL_EVTMODE(v) FLD_VAL(v, 5, 5) /* Event mode */ |
| 51 | #define VP_CTRL_RGB888(v) FLD_VAL(v, 8, 8) /* RGB888 mode */ |
| 52 | #define VP_CTRL_VSDELAY(v) FLD_VAL(v, 31, 20) /* VSYNC delay */ |
| 53 | #define VP_CTRL_HSPOL BIT(17) /* Polarity of HSYNC signal */ |
| 54 | #define VP_CTRL_DEPOL BIT(18) /* Polarity of DE signal */ |
| 55 | #define VP_CTRL_VSPOL BIT(19) /* Polarity of VSYNC signal */ |
| 56 | #define VP_HTIM1 0x0454 /* Horizontal Timing Control 1 */ |
| 57 | #define VP_HTIM1_HBP(v) FLD_VAL(v, 24, 16) |
| 58 | #define VP_HTIM1_HSYNC(v) FLD_VAL(v, 8, 0) |
| 59 | #define VP_HTIM2 0x0458 /* Horizontal Timing Control 2 */ |
| 60 | #define VP_HTIM2_HFP(v) FLD_VAL(v, 24, 16) |
| 61 | #define VP_HTIM2_HACT(v) FLD_VAL(v, 10, 0) |
| 62 | #define VP_VTIM1 0x045C /* Vertical Timing Control 1 */ |
| 63 | #define VP_VTIM1_VBP(v) FLD_VAL(v, 23, 16) |
| 64 | #define VP_VTIM1_VSYNC(v) FLD_VAL(v, 7, 0) |
| 65 | #define VP_VTIM2 0x0460 /* Vertical Timing Control 2 */ |
| 66 | #define VP_VTIM2_VFP(v) FLD_VAL(v, 23, 16) |
| 67 | #define VP_VTIM2_VACT(v) FLD_VAL(v, 10, 0) |
| 68 | #define VP_VFUEN 0x0464 /* Video Frame Timing Update Enable */ |
| 69 | |
| 70 | /* LVDS registers */ |
| 71 | #define LV_MX0003 0x0480 /* Mux input bit 0 to 3 */ |
| 72 | #define LV_MX0407 0x0484 /* Mux input bit 4 to 7 */ |
| 73 | #define LV_MX0811 0x0488 /* Mux input bit 8 to 11 */ |
| 74 | #define LV_MX1215 0x048C /* Mux input bit 12 to 15 */ |
| 75 | #define LV_MX1619 0x0490 /* Mux input bit 16 to 19 */ |
| 76 | #define LV_MX2023 0x0494 /* Mux input bit 20 to 23 */ |
| 77 | #define LV_MX2427 0x0498 /* Mux input bit 24 to 27 */ |
| 78 | #define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ |
| 79 | FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) |
| 80 | |
| 81 | /* Input bit numbers used in mux registers */ |
| 82 | enum { |
| 83 | LVI_R0, |
| 84 | LVI_R1, |
| 85 | LVI_R2, |
| 86 | LVI_R3, |
| 87 | LVI_R4, |
| 88 | LVI_R5, |
| 89 | LVI_R6, |
| 90 | LVI_R7, |
| 91 | LVI_G0, |
| 92 | LVI_G1, |
| 93 | LVI_G2, |
| 94 | LVI_G3, |
| 95 | LVI_G4, |
| 96 | LVI_G5, |
| 97 | LVI_G6, |
| 98 | LVI_G7, |
| 99 | LVI_B0, |
| 100 | LVI_B1, |
| 101 | LVI_B2, |
| 102 | LVI_B3, |
| 103 | LVI_B4, |
| 104 | LVI_B5, |
| 105 | LVI_B6, |
| 106 | LVI_B7, |
| 107 | LVI_HS, |
| 108 | LVI_VS, |
| 109 | LVI_DE, |
| 110 | LVI_L0 |
| 111 | }; |
| 112 | |
| 113 | #define LV_CFG 0x049C /* LVDS Configuration */ |
| 114 | #define LV_PHY0 0x04A0 /* LVDS PHY 0 */ |
| 115 | #define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ |
| 116 | #define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) |
| 117 | #define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */ |
| 118 | #define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */ |
| 119 | |
| 120 | /* System registers */ |
| 121 | #define SYS_RST 0x0504 /* System Reset */ |
| 122 | #define SYS_ID 0x0580 /* System ID */ |
| 123 | |
| 124 | #define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ |
| 125 | #define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ |
| 126 | #define SYS_RST_LCD BIT(2) /* Reset LCD controller */ |
| 127 | #define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ |
| 128 | #define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ |
| 129 | #define SYS_RST_REG BIT(5) /* Reset Register module */ |
| 130 | |
| 131 | #define LPX_PERIOD 2 |
| 132 | #define TTA_SURE 3 |
| 133 | #define TTA_GET 0x20000 |
| 134 | |
| 135 | /* Lane enable PPI and DSI register bits */ |
| 136 | #define LANEENABLE_CLEN BIT(0) |
| 137 | #define LANEENABLE_L0EN BIT(1) |
| 138 | #define LANEENABLE_L1EN BIT(2) |
| 139 | #define LANEENABLE_L2EN BIT(3) |
| 140 | #define LANEENABLE_L3EN BIT(4) |
| 141 | |
| 142 | /* LVCFG fields */ |
| 143 | #define LV_CFG_LVEN BIT(0) |
| 144 | #define LV_CFG_LVDLINK BIT(1) |
| 145 | #define LV_CFG_CLKPOL1 BIT(2) |
| 146 | #define LV_CFG_CLKPOL2 BIT(3) |
| 147 | |
| 148 | static const char * const tc358764_supplies[] = { |
| 149 | "vddc", "vddio", "vddlvds" |
| 150 | }; |
| 151 | |
| 152 | struct tc358764 { |
| 153 | struct device *dev; |
| 154 | struct drm_bridge bridge; |
| 155 | struct drm_connector connector; |
| 156 | struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)]; |
| 157 | struct gpio_desc *gpio_reset; |
| 158 | struct drm_panel *panel; |
| 159 | int error; |
| 160 | }; |
| 161 | |
| 162 | static int tc358764_clear_error(struct tc358764 *ctx) |
| 163 | { |
| 164 | int ret = ctx->error; |
| 165 | |
| 166 | ctx->error = 0; |
| 167 | return ret; |
| 168 | } |
| 169 | |
| 170 | static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val) |
| 171 | { |
| 172 | struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); |
| 173 | ssize_t ret; |
| 174 | |
| 175 | if (ctx->error) |
| 176 | return; |
| 177 | |
| 178 | cpu_to_le16s(&addr); |
| 179 | ret = mipi_dsi_generic_read(dsi, &addr, sizeof(addr), val, sizeof(*val)); |
| 180 | if (ret >= 0) |
| 181 | le32_to_cpus(val); |
| 182 | |
| 183 | dev_dbg(ctx->dev, "read: %d, addr: %d\n", addr, *val); |
| 184 | } |
| 185 | |
| 186 | static void tc358764_write(struct tc358764 *ctx, u16 addr, u32 val) |
| 187 | { |
| 188 | struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); |
| 189 | ssize_t ret; |
| 190 | u8 data[6]; |
| 191 | |
| 192 | if (ctx->error) |
| 193 | return; |
| 194 | |
| 195 | data[0] = addr; |
| 196 | data[1] = addr >> 8; |
| 197 | data[2] = val; |
| 198 | data[3] = val >> 8; |
| 199 | data[4] = val >> 16; |
| 200 | data[5] = val >> 24; |
| 201 | |
| 202 | ret = mipi_dsi_generic_write(dsi, data, sizeof(data)); |
| 203 | if (ret < 0) |
| 204 | ctx->error = ret; |
| 205 | } |
| 206 | |
| 207 | static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge) |
| 208 | { |
| 209 | return container_of(bridge, struct tc358764, bridge); |
| 210 | } |
| 211 | |
| 212 | static inline |
| 213 | struct tc358764 *connector_to_tc358764(struct drm_connector *connector) |
| 214 | { |
| 215 | return container_of(connector, struct tc358764, connector); |
| 216 | } |
| 217 | |
| 218 | static int tc358764_init(struct tc358764 *ctx) |
| 219 | { |
| 220 | u32 v = 0; |
| 221 | |
| 222 | tc358764_read(ctx, SYS_ID, &v); |
| 223 | if (ctx->error) |
| 224 | return tc358764_clear_error(ctx); |
| 225 | dev_info(ctx->dev, "ID: %#x\n", v); |
| 226 | |
| 227 | /* configure PPI counters */ |
| 228 | tc358764_write(ctx, PPI_TX_RX_TA, TTA_GET | TTA_SURE); |
| 229 | tc358764_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD); |
| 230 | tc358764_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5); |
| 231 | tc358764_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5); |
| 232 | tc358764_write(ctx, PPI_D2S_CLRSIPOCOUNT, 5); |
| 233 | tc358764_write(ctx, PPI_D3S_CLRSIPOCOUNT, 5); |
| 234 | |
| 235 | /* enable four data lanes and clock lane */ |
| 236 | tc358764_write(ctx, PPI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN | |
| 237 | LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN); |
| 238 | tc358764_write(ctx, DSI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN | |
| 239 | LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN); |
| 240 | |
| 241 | /* start */ |
| 242 | tc358764_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION); |
| 243 | tc358764_write(ctx, DSI_STARTDSI, DSI_RX_START); |
| 244 | |
| 245 | /* configure video path */ |
| 246 | tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) | |
| 247 | VP_CTRL_EVTMODE(1) | VP_CTRL_HSPOL | VP_CTRL_VSPOL); |
| 248 | |
| 249 | /* reset PHY */ |
| 250 | tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1) | |
| 251 | LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) | LV_PHY0_ND(6)); |
| 252 | tc358764_write(ctx, LV_PHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) | |
| 253 | LV_PHY0_ND(6)); |
| 254 | |
| 255 | /* reset bridge */ |
| 256 | tc358764_write(ctx, SYS_RST, SYS_RST_LCD); |
| 257 | |
| 258 | /* set bit order */ |
| 259 | tc358764_write(ctx, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); |
| 260 | tc358764_write(ctx, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); |
| 261 | tc358764_write(ctx, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); |
| 262 | tc358764_write(ctx, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); |
| 263 | tc358764_write(ctx, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); |
| 264 | tc358764_write(ctx, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); |
| 265 | tc358764_write(ctx, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); |
| 266 | tc358764_write(ctx, LV_CFG, LV_CFG_CLKPOL2 | LV_CFG_CLKPOL1 | |
| 267 | LV_CFG_LVEN); |
| 268 | |
| 269 | return tc358764_clear_error(ctx); |
| 270 | } |
| 271 | |
| 272 | static void tc358764_reset(struct tc358764 *ctx) |
| 273 | { |
| 274 | gpiod_set_value(ctx->gpio_reset, 1); |
| 275 | usleep_range(1000, 2000); |
| 276 | gpiod_set_value(ctx->gpio_reset, 0); |
| 277 | usleep_range(1000, 2000); |
| 278 | } |
| 279 | |
| 280 | static int tc358764_get_modes(struct drm_connector *connector) |
| 281 | { |
| 282 | struct tc358764 *ctx = connector_to_tc358764(connector); |
| 283 | |
| 284 | return drm_panel_get_modes(ctx->panel); |
| 285 | } |
| 286 | |
| 287 | static const |
| 288 | struct drm_connector_helper_funcs tc358764_connector_helper_funcs = { |
| 289 | .get_modes = tc358764_get_modes, |
| 290 | }; |
| 291 | |
| 292 | static const struct drm_connector_funcs tc358764_connector_funcs = { |
| 293 | .fill_modes = drm_helper_probe_single_connector_modes, |
| 294 | .destroy = drm_connector_cleanup, |
| 295 | .reset = drm_atomic_helper_connector_reset, |
| 296 | .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| 297 | .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| 298 | }; |
| 299 | |
| 300 | static void tc358764_disable(struct drm_bridge *bridge) |
| 301 | { |
| 302 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 303 | int ret = drm_panel_disable(bridge_to_tc358764(bridge)->panel); |
| 304 | |
| 305 | if (ret < 0) |
| 306 | dev_err(ctx->dev, "error disabling panel (%d)\n", ret); |
| 307 | } |
| 308 | |
| 309 | static void tc358764_post_disable(struct drm_bridge *bridge) |
| 310 | { |
| 311 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 312 | int ret; |
| 313 | |
| 314 | ret = drm_panel_unprepare(ctx->panel); |
| 315 | if (ret < 0) |
| 316 | dev_err(ctx->dev, "error unpreparing panel (%d)\n", ret); |
| 317 | tc358764_reset(ctx); |
| 318 | usleep_range(10000, 15000); |
| 319 | ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| 320 | if (ret < 0) |
| 321 | dev_err(ctx->dev, "error disabling regulators (%d)\n", ret); |
| 322 | } |
| 323 | |
| 324 | static void tc358764_pre_enable(struct drm_bridge *bridge) |
| 325 | { |
| 326 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 327 | int ret; |
| 328 | |
| 329 | ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| 330 | if (ret < 0) |
| 331 | dev_err(ctx->dev, "error enabling regulators (%d)\n", ret); |
| 332 | usleep_range(10000, 15000); |
| 333 | tc358764_reset(ctx); |
| 334 | ret = tc358764_init(ctx); |
| 335 | if (ret < 0) |
| 336 | dev_err(ctx->dev, "error initializing bridge (%d)\n", ret); |
| 337 | ret = drm_panel_prepare(ctx->panel); |
| 338 | if (ret < 0) |
| 339 | dev_err(ctx->dev, "error preparing panel (%d)\n", ret); |
| 340 | } |
| 341 | |
| 342 | static void tc358764_enable(struct drm_bridge *bridge) |
| 343 | { |
| 344 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 345 | int ret = drm_panel_enable(ctx->panel); |
| 346 | |
| 347 | if (ret < 0) |
| 348 | dev_err(ctx->dev, "error enabling panel (%d)\n", ret); |
| 349 | } |
| 350 | |
| 351 | static int tc358764_attach(struct drm_bridge *bridge) |
| 352 | { |
| 353 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 354 | struct drm_device *drm = bridge->dev; |
| 355 | int ret; |
| 356 | |
| 357 | ctx->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| 358 | ret = drm_connector_init(drm, &ctx->connector, |
| 359 | &tc358764_connector_funcs, |
| 360 | DRM_MODE_CONNECTOR_LVDS); |
| 361 | if (ret) { |
| 362 | DRM_ERROR("Failed to initialize connector\n"); |
| 363 | return ret; |
| 364 | } |
| 365 | |
| 366 | drm_connector_helper_add(&ctx->connector, |
| 367 | &tc358764_connector_helper_funcs); |
| 368 | drm_connector_attach_encoder(&ctx->connector, bridge->encoder); |
| 369 | drm_panel_attach(ctx->panel, &ctx->connector); |
| 370 | ctx->connector.funcs->reset(&ctx->connector); |
| 371 | drm_fb_helper_add_one_connector(drm->fb_helper, &ctx->connector); |
| 372 | drm_connector_register(&ctx->connector); |
| 373 | |
| 374 | return 0; |
| 375 | } |
| 376 | |
| 377 | static void tc358764_detach(struct drm_bridge *bridge) |
| 378 | { |
| 379 | struct tc358764 *ctx = bridge_to_tc358764(bridge); |
| 380 | struct drm_device *drm = bridge->dev; |
| 381 | |
| 382 | drm_connector_unregister(&ctx->connector); |
| 383 | drm_fb_helper_remove_one_connector(drm->fb_helper, &ctx->connector); |
| 384 | drm_panel_detach(ctx->panel); |
| 385 | ctx->panel = NULL; |
| 386 | drm_connector_put(&ctx->connector); |
| 387 | } |
| 388 | |
| 389 | static const struct drm_bridge_funcs tc358764_bridge_funcs = { |
| 390 | .disable = tc358764_disable, |
| 391 | .post_disable = tc358764_post_disable, |
| 392 | .enable = tc358764_enable, |
| 393 | .pre_enable = tc358764_pre_enable, |
| 394 | .attach = tc358764_attach, |
| 395 | .detach = tc358764_detach, |
| 396 | }; |
| 397 | |
| 398 | static int tc358764_parse_dt(struct tc358764 *ctx) |
| 399 | { |
| 400 | struct device *dev = ctx->dev; |
| 401 | int ret; |
| 402 | |
| 403 | ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| 404 | if (IS_ERR(ctx->gpio_reset)) { |
| 405 | dev_err(dev, "no reset GPIO pin provided\n"); |
| 406 | return PTR_ERR(ctx->gpio_reset); |
| 407 | } |
| 408 | |
| 409 | ret = drm_of_find_panel_or_bridge(ctx->dev->of_node, 1, 0, &ctx->panel, |
| 410 | NULL); |
| 411 | if (ret && ret != -EPROBE_DEFER) |
| 412 | dev_err(dev, "cannot find panel (%d)\n", ret); |
| 413 | |
| 414 | return ret; |
| 415 | } |
| 416 | |
| 417 | static int tc358764_configure_regulators(struct tc358764 *ctx) |
| 418 | { |
| 419 | int i, ret; |
| 420 | |
| 421 | for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i) |
| 422 | ctx->supplies[i].supply = tc358764_supplies[i]; |
| 423 | |
| 424 | ret = devm_regulator_bulk_get(ctx->dev, ARRAY_SIZE(ctx->supplies), |
| 425 | ctx->supplies); |
| 426 | if (ret < 0) |
| 427 | dev_err(ctx->dev, "failed to get regulators: %d\n", ret); |
| 428 | |
| 429 | return ret; |
| 430 | } |
| 431 | |
| 432 | static int tc358764_probe(struct mipi_dsi_device *dsi) |
| 433 | { |
| 434 | struct device *dev = &dsi->dev; |
| 435 | struct tc358764 *ctx; |
| 436 | int ret; |
| 437 | |
| 438 | ctx = devm_kzalloc(dev, sizeof(struct tc358764), GFP_KERNEL); |
| 439 | if (!ctx) |
| 440 | return -ENOMEM; |
| 441 | |
| 442 | mipi_dsi_set_drvdata(dsi, ctx); |
| 443 | |
| 444 | ctx->dev = dev; |
| 445 | |
| 446 | dsi->lanes = 4; |
| 447 | dsi->format = MIPI_DSI_FMT_RGB888; |
| 448 | dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
| 449 | | MIPI_DSI_MODE_VIDEO_AUTO_VERT | MIPI_DSI_MODE_LPM; |
| 450 | |
| 451 | ret = tc358764_parse_dt(ctx); |
| 452 | if (ret < 0) |
| 453 | return ret; |
| 454 | |
| 455 | ret = tc358764_configure_regulators(ctx); |
| 456 | if (ret < 0) |
| 457 | return ret; |
| 458 | |
| 459 | ctx->bridge.funcs = &tc358764_bridge_funcs; |
| 460 | ctx->bridge.of_node = dev->of_node; |
| 461 | |
| 462 | drm_bridge_add(&ctx->bridge); |
| 463 | |
| 464 | ret = mipi_dsi_attach(dsi); |
| 465 | if (ret < 0) { |
| 466 | drm_bridge_remove(&ctx->bridge); |
| 467 | dev_err(dev, "failed to attach dsi\n"); |
| 468 | } |
| 469 | |
| 470 | return ret; |
| 471 | } |
| 472 | |
| 473 | static int tc358764_remove(struct mipi_dsi_device *dsi) |
| 474 | { |
| 475 | struct tc358764 *ctx = mipi_dsi_get_drvdata(dsi); |
| 476 | |
| 477 | mipi_dsi_detach(dsi); |
| 478 | drm_bridge_remove(&ctx->bridge); |
| 479 | |
| 480 | return 0; |
| 481 | } |
| 482 | |
| 483 | static const struct of_device_id tc358764_of_match[] = { |
| 484 | { .compatible = "toshiba,tc358764" }, |
| 485 | { } |
| 486 | }; |
| 487 | MODULE_DEVICE_TABLE(of, tc358764_of_match); |
| 488 | |
| 489 | static struct mipi_dsi_driver tc358764_driver = { |
| 490 | .probe = tc358764_probe, |
| 491 | .remove = tc358764_remove, |
| 492 | .driver = { |
| 493 | .name = "tc358764", |
| 494 | .owner = THIS_MODULE, |
| 495 | .of_match_table = tc358764_of_match, |
| 496 | }, |
| 497 | }; |
| 498 | module_mipi_dsi_driver(tc358764_driver); |
| 499 | |
| 500 | MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); |
| 501 | MODULE_AUTHOR("Maciej Purski <m.purski@samsung.com>"); |
| 502 | MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358764 DSI/LVDS Bridge"); |
| 503 | MODULE_LICENSE("GPL v2"); |