Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * USB Attached SCSI |
| 4 | * Note that this is not the same as the USB Mass Storage driver |
| 5 | * |
| 6 | * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 |
| 7 | * Copyright Matthew Wilcox for Intel Corp, 2010 |
| 8 | * Copyright Sarah Sharp for Intel Corp, 2010 |
| 9 | */ |
| 10 | |
| 11 | #include <linux/blkdev.h> |
| 12 | #include <linux/slab.h> |
| 13 | #include <linux/types.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/usb.h> |
| 16 | #include <linux/usb_usual.h> |
| 17 | #include <linux/usb/hcd.h> |
| 18 | #include <linux/usb/storage.h> |
| 19 | #include <linux/usb/uas.h> |
| 20 | |
| 21 | #include <scsi/scsi.h> |
| 22 | #include <scsi/scsi_eh.h> |
| 23 | #include <scsi/scsi_dbg.h> |
| 24 | #include <scsi/scsi_cmnd.h> |
| 25 | #include <scsi/scsi_device.h> |
| 26 | #include <scsi/scsi_host.h> |
| 27 | #include <scsi/scsi_tcq.h> |
| 28 | |
| 29 | #include "uas-detect.h" |
| 30 | #include "scsiglue.h" |
| 31 | |
| 32 | #define MAX_CMNDS 256 |
| 33 | |
| 34 | struct uas_dev_info { |
| 35 | struct usb_interface *intf; |
| 36 | struct usb_device *udev; |
| 37 | struct usb_anchor cmd_urbs; |
| 38 | struct usb_anchor sense_urbs; |
| 39 | struct usb_anchor data_urbs; |
| 40 | unsigned long flags; |
| 41 | int qdepth, resetting; |
| 42 | unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; |
| 43 | unsigned use_streams:1; |
| 44 | unsigned shutdown:1; |
| 45 | struct scsi_cmnd *cmnd[MAX_CMNDS]; |
| 46 | spinlock_t lock; |
| 47 | struct work_struct work; |
| 48 | }; |
| 49 | |
| 50 | enum { |
| 51 | SUBMIT_STATUS_URB = BIT(1), |
| 52 | ALLOC_DATA_IN_URB = BIT(2), |
| 53 | SUBMIT_DATA_IN_URB = BIT(3), |
| 54 | ALLOC_DATA_OUT_URB = BIT(4), |
| 55 | SUBMIT_DATA_OUT_URB = BIT(5), |
| 56 | ALLOC_CMD_URB = BIT(6), |
| 57 | SUBMIT_CMD_URB = BIT(7), |
| 58 | COMMAND_INFLIGHT = BIT(8), |
| 59 | DATA_IN_URB_INFLIGHT = BIT(9), |
| 60 | DATA_OUT_URB_INFLIGHT = BIT(10), |
| 61 | COMMAND_ABORTED = BIT(11), |
| 62 | IS_IN_WORK_LIST = BIT(12), |
| 63 | }; |
| 64 | |
| 65 | /* Overrides scsi_pointer */ |
| 66 | struct uas_cmd_info { |
| 67 | unsigned int state; |
| 68 | unsigned int uas_tag; |
| 69 | struct urb *cmd_urb; |
| 70 | struct urb *data_in_urb; |
| 71 | struct urb *data_out_urb; |
| 72 | }; |
| 73 | |
| 74 | /* I hate forward declarations, but I actually have a loop */ |
| 75 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| 76 | struct uas_dev_info *devinfo); |
| 77 | static void uas_do_work(struct work_struct *work); |
| 78 | static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); |
| 79 | static void uas_free_streams(struct uas_dev_info *devinfo); |
| 80 | static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, |
| 81 | int status); |
| 82 | |
| 83 | static void uas_do_work(struct work_struct *work) |
| 84 | { |
| 85 | struct uas_dev_info *devinfo = |
| 86 | container_of(work, struct uas_dev_info, work); |
| 87 | struct uas_cmd_info *cmdinfo; |
| 88 | struct scsi_cmnd *cmnd; |
| 89 | unsigned long flags; |
| 90 | int i, err; |
| 91 | |
| 92 | spin_lock_irqsave(&devinfo->lock, flags); |
| 93 | |
| 94 | if (devinfo->resetting) |
| 95 | goto out; |
| 96 | |
| 97 | for (i = 0; i < devinfo->qdepth; i++) { |
| 98 | if (!devinfo->cmnd[i]) |
| 99 | continue; |
| 100 | |
| 101 | cmnd = devinfo->cmnd[i]; |
| 102 | cmdinfo = (void *)&cmnd->SCp; |
| 103 | |
| 104 | if (!(cmdinfo->state & IS_IN_WORK_LIST)) |
| 105 | continue; |
| 106 | |
| 107 | err = uas_submit_urbs(cmnd, cmnd->device->hostdata); |
| 108 | if (!err) |
| 109 | cmdinfo->state &= ~IS_IN_WORK_LIST; |
| 110 | else |
| 111 | schedule_work(&devinfo->work); |
| 112 | } |
| 113 | out: |
| 114 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 115 | } |
| 116 | |
| 117 | static void uas_add_work(struct uas_cmd_info *cmdinfo) |
| 118 | { |
| 119 | struct scsi_pointer *scp = (void *)cmdinfo; |
| 120 | struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); |
| 121 | struct uas_dev_info *devinfo = cmnd->device->hostdata; |
| 122 | |
| 123 | lockdep_assert_held(&devinfo->lock); |
| 124 | cmdinfo->state |= IS_IN_WORK_LIST; |
| 125 | schedule_work(&devinfo->work); |
| 126 | } |
| 127 | |
| 128 | static void uas_zap_pending(struct uas_dev_info *devinfo, int result) |
| 129 | { |
| 130 | struct uas_cmd_info *cmdinfo; |
| 131 | struct scsi_cmnd *cmnd; |
| 132 | unsigned long flags; |
| 133 | int i, err; |
| 134 | |
| 135 | spin_lock_irqsave(&devinfo->lock, flags); |
| 136 | for (i = 0; i < devinfo->qdepth; i++) { |
| 137 | if (!devinfo->cmnd[i]) |
| 138 | continue; |
| 139 | |
| 140 | cmnd = devinfo->cmnd[i]; |
| 141 | cmdinfo = (void *)&cmnd->SCp; |
| 142 | uas_log_cmd_state(cmnd, __func__, 0); |
| 143 | /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */ |
| 144 | cmdinfo->state &= ~COMMAND_INFLIGHT; |
| 145 | cmnd->result = result << 16; |
| 146 | err = uas_try_complete(cmnd, __func__); |
| 147 | WARN_ON(err != 0); |
| 148 | } |
| 149 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 150 | } |
| 151 | |
| 152 | static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) |
| 153 | { |
| 154 | struct sense_iu *sense_iu = urb->transfer_buffer; |
| 155 | struct scsi_device *sdev = cmnd->device; |
| 156 | |
| 157 | if (urb->actual_length > 16) { |
| 158 | unsigned len = be16_to_cpup(&sense_iu->len); |
| 159 | if (len + 16 != urb->actual_length) { |
| 160 | int newlen = min(len + 16, urb->actual_length) - 16; |
| 161 | if (newlen < 0) |
| 162 | newlen = 0; |
| 163 | sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| 164 | "disagrees with IU sense data length %d, " |
| 165 | "using %d bytes of sense data\n", __func__, |
| 166 | urb->actual_length, len, newlen); |
| 167 | len = newlen; |
| 168 | } |
| 169 | memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| 170 | } |
| 171 | |
| 172 | cmnd->result = sense_iu->status; |
| 173 | } |
| 174 | |
| 175 | static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, |
| 176 | int status) |
| 177 | { |
| 178 | struct uas_cmd_info *ci = (void *)&cmnd->SCp; |
| 179 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 180 | |
| 181 | scmd_printk(KERN_INFO, cmnd, |
| 182 | "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", |
| 183 | prefix, status, cmdinfo->uas_tag, |
| 184 | (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", |
| 185 | (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", |
| 186 | (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", |
| 187 | (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "", |
| 188 | (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "", |
| 189 | (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "", |
| 190 | (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "", |
| 191 | (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", |
| 192 | (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", |
| 193 | (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", |
| 194 | (ci->state & COMMAND_ABORTED) ? " abort" : "", |
| 195 | (ci->state & IS_IN_WORK_LIST) ? " work" : ""); |
| 196 | scsi_print_command(cmnd); |
| 197 | } |
| 198 | |
| 199 | static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd) |
| 200 | { |
| 201 | struct uas_cmd_info *cmdinfo; |
| 202 | |
| 203 | if (!cmnd) |
| 204 | return; |
| 205 | |
| 206 | cmdinfo = (void *)&cmnd->SCp; |
| 207 | |
| 208 | if (cmdinfo->state & SUBMIT_CMD_URB) |
| 209 | usb_free_urb(cmdinfo->cmd_urb); |
| 210 | |
| 211 | /* data urbs may have never gotten their submit flag set */ |
| 212 | if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT)) |
| 213 | usb_free_urb(cmdinfo->data_in_urb); |
| 214 | if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) |
| 215 | usb_free_urb(cmdinfo->data_out_urb); |
| 216 | } |
| 217 | |
| 218 | static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) |
| 219 | { |
| 220 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 221 | struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| 222 | |
| 223 | lockdep_assert_held(&devinfo->lock); |
| 224 | if (cmdinfo->state & (COMMAND_INFLIGHT | |
| 225 | DATA_IN_URB_INFLIGHT | |
| 226 | DATA_OUT_URB_INFLIGHT | |
| 227 | COMMAND_ABORTED)) |
| 228 | return -EBUSY; |
| 229 | devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; |
| 230 | uas_free_unsubmitted_urbs(cmnd); |
| 231 | cmnd->scsi_done(cmnd); |
| 232 | return 0; |
| 233 | } |
| 234 | |
| 235 | static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, |
| 236 | unsigned direction) |
| 237 | { |
| 238 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 239 | int err; |
| 240 | |
| 241 | cmdinfo->state |= direction | SUBMIT_STATUS_URB; |
| 242 | err = uas_submit_urbs(cmnd, cmnd->device->hostdata); |
| 243 | if (err) { |
| 244 | uas_add_work(cmdinfo); |
| 245 | } |
| 246 | } |
| 247 | |
| 248 | static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd) |
| 249 | { |
| 250 | u8 response_code = riu->response_code; |
| 251 | |
| 252 | switch (response_code) { |
| 253 | case RC_INCORRECT_LUN: |
| 254 | cmnd->result = DID_BAD_TARGET << 16; |
| 255 | break; |
| 256 | case RC_TMF_SUCCEEDED: |
| 257 | cmnd->result = DID_OK << 16; |
| 258 | break; |
| 259 | case RC_TMF_NOT_SUPPORTED: |
| 260 | cmnd->result = DID_TARGET_FAILURE << 16; |
| 261 | break; |
| 262 | default: |
| 263 | uas_log_cmd_state(cmnd, "response iu", response_code); |
| 264 | cmnd->result = DID_ERROR << 16; |
| 265 | break; |
| 266 | } |
| 267 | |
| 268 | return response_code == RC_TMF_SUCCEEDED; |
| 269 | } |
| 270 | |
| 271 | static void uas_stat_cmplt(struct urb *urb) |
| 272 | { |
| 273 | struct iu *iu = urb->transfer_buffer; |
| 274 | struct Scsi_Host *shost = urb->context; |
| 275 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 276 | struct urb *data_in_urb = NULL; |
| 277 | struct urb *data_out_urb = NULL; |
| 278 | struct scsi_cmnd *cmnd; |
| 279 | struct uas_cmd_info *cmdinfo; |
| 280 | unsigned long flags; |
| 281 | unsigned int idx; |
| 282 | int status = urb->status; |
| 283 | bool success; |
| 284 | |
| 285 | spin_lock_irqsave(&devinfo->lock, flags); |
| 286 | |
| 287 | if (devinfo->resetting) |
| 288 | goto out; |
| 289 | |
| 290 | if (status) { |
| 291 | if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) |
| 292 | dev_err(&urb->dev->dev, "stat urb: status %d\n", status); |
| 293 | goto out; |
| 294 | } |
| 295 | |
| 296 | idx = be16_to_cpup(&iu->tag) - 1; |
| 297 | if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { |
| 298 | dev_err(&urb->dev->dev, |
| 299 | "stat urb: no pending cmd for uas-tag %d\n", idx + 1); |
| 300 | goto out; |
| 301 | } |
| 302 | |
| 303 | cmnd = devinfo->cmnd[idx]; |
| 304 | cmdinfo = (void *)&cmnd->SCp; |
| 305 | |
| 306 | if (!(cmdinfo->state & COMMAND_INFLIGHT)) { |
| 307 | uas_log_cmd_state(cmnd, "unexpected status cmplt", 0); |
| 308 | goto out; |
| 309 | } |
| 310 | |
| 311 | switch (iu->iu_id) { |
| 312 | case IU_ID_STATUS: |
| 313 | uas_sense(urb, cmnd); |
| 314 | if (cmnd->result != 0) { |
| 315 | /* cancel data transfers on error */ |
| 316 | data_in_urb = usb_get_urb(cmdinfo->data_in_urb); |
| 317 | data_out_urb = usb_get_urb(cmdinfo->data_out_urb); |
| 318 | } |
| 319 | cmdinfo->state &= ~COMMAND_INFLIGHT; |
| 320 | uas_try_complete(cmnd, __func__); |
| 321 | break; |
| 322 | case IU_ID_READ_READY: |
| 323 | if (!cmdinfo->data_in_urb || |
| 324 | (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { |
| 325 | uas_log_cmd_state(cmnd, "unexpected read rdy", 0); |
| 326 | break; |
| 327 | } |
| 328 | uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); |
| 329 | break; |
| 330 | case IU_ID_WRITE_READY: |
| 331 | if (!cmdinfo->data_out_urb || |
| 332 | (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { |
| 333 | uas_log_cmd_state(cmnd, "unexpected write rdy", 0); |
| 334 | break; |
| 335 | } |
| 336 | uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); |
| 337 | break; |
| 338 | case IU_ID_RESPONSE: |
| 339 | cmdinfo->state &= ~COMMAND_INFLIGHT; |
| 340 | success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd); |
| 341 | if (!success) { |
| 342 | /* Error, cancel data transfers */ |
| 343 | data_in_urb = usb_get_urb(cmdinfo->data_in_urb); |
| 344 | data_out_urb = usb_get_urb(cmdinfo->data_out_urb); |
| 345 | } |
| 346 | uas_try_complete(cmnd, __func__); |
| 347 | break; |
| 348 | default: |
| 349 | uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id); |
| 350 | } |
| 351 | out: |
| 352 | usb_free_urb(urb); |
| 353 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 354 | |
| 355 | /* Unlinking of data urbs must be done without holding the lock */ |
| 356 | if (data_in_urb) { |
| 357 | usb_unlink_urb(data_in_urb); |
| 358 | usb_put_urb(data_in_urb); |
| 359 | } |
| 360 | if (data_out_urb) { |
| 361 | usb_unlink_urb(data_out_urb); |
| 362 | usb_put_urb(data_out_urb); |
| 363 | } |
| 364 | } |
| 365 | |
| 366 | static void uas_data_cmplt(struct urb *urb) |
| 367 | { |
| 368 | struct scsi_cmnd *cmnd = urb->context; |
| 369 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 370 | struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| 371 | struct scsi_data_buffer *sdb = NULL; |
| 372 | unsigned long flags; |
| 373 | int status = urb->status; |
| 374 | |
| 375 | spin_lock_irqsave(&devinfo->lock, flags); |
| 376 | |
| 377 | if (cmdinfo->data_in_urb == urb) { |
| 378 | sdb = scsi_in(cmnd); |
| 379 | cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; |
| 380 | cmdinfo->data_in_urb = NULL; |
| 381 | } else if (cmdinfo->data_out_urb == urb) { |
| 382 | sdb = scsi_out(cmnd); |
| 383 | cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; |
| 384 | cmdinfo->data_out_urb = NULL; |
| 385 | } |
| 386 | if (sdb == NULL) { |
| 387 | WARN_ON_ONCE(1); |
| 388 | goto out; |
| 389 | } |
| 390 | |
| 391 | if (devinfo->resetting) |
| 392 | goto out; |
| 393 | |
| 394 | /* Data urbs should not complete before the cmd urb is submitted */ |
| 395 | if (cmdinfo->state & SUBMIT_CMD_URB) { |
| 396 | uas_log_cmd_state(cmnd, "unexpected data cmplt", 0); |
| 397 | goto out; |
| 398 | } |
| 399 | |
| 400 | if (status) { |
| 401 | if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) |
| 402 | uas_log_cmd_state(cmnd, "data cmplt err", status); |
| 403 | /* error: no data transfered */ |
| 404 | sdb->resid = sdb->length; |
| 405 | } else { |
| 406 | sdb->resid = sdb->length - urb->actual_length; |
| 407 | } |
| 408 | uas_try_complete(cmnd, __func__); |
| 409 | out: |
| 410 | usb_free_urb(urb); |
| 411 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 412 | } |
| 413 | |
| 414 | static void uas_cmd_cmplt(struct urb *urb) |
| 415 | { |
| 416 | if (urb->status) |
| 417 | dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status); |
| 418 | |
| 419 | usb_free_urb(urb); |
| 420 | } |
| 421 | |
| 422 | static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| 423 | struct scsi_cmnd *cmnd, |
| 424 | enum dma_data_direction dir) |
| 425 | { |
| 426 | struct usb_device *udev = devinfo->udev; |
| 427 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 428 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 429 | struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE) |
| 430 | ? scsi_in(cmnd) : scsi_out(cmnd); |
| 431 | unsigned int pipe = (dir == DMA_FROM_DEVICE) |
| 432 | ? devinfo->data_in_pipe : devinfo->data_out_pipe; |
| 433 | |
| 434 | if (!urb) |
| 435 | goto out; |
| 436 | usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, |
| 437 | uas_data_cmplt, cmnd); |
| 438 | if (devinfo->use_streams) |
| 439 | urb->stream_id = cmdinfo->uas_tag; |
| 440 | urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; |
| 441 | urb->sg = sdb->table.sgl; |
| 442 | out: |
| 443 | return urb; |
| 444 | } |
| 445 | |
| 446 | static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| 447 | struct scsi_cmnd *cmnd) |
| 448 | { |
| 449 | struct usb_device *udev = devinfo->udev; |
| 450 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 451 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 452 | struct sense_iu *iu; |
| 453 | |
| 454 | if (!urb) |
| 455 | goto out; |
| 456 | |
| 457 | iu = kzalloc(sizeof(*iu), gfp); |
| 458 | if (!iu) |
| 459 | goto free; |
| 460 | |
| 461 | usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), |
| 462 | uas_stat_cmplt, cmnd->device->host); |
| 463 | if (devinfo->use_streams) |
| 464 | urb->stream_id = cmdinfo->uas_tag; |
| 465 | urb->transfer_flags |= URB_FREE_BUFFER; |
| 466 | out: |
| 467 | return urb; |
| 468 | free: |
| 469 | usb_free_urb(urb); |
| 470 | return NULL; |
| 471 | } |
| 472 | |
| 473 | static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| 474 | struct scsi_cmnd *cmnd) |
| 475 | { |
| 476 | struct usb_device *udev = devinfo->udev; |
| 477 | struct scsi_device *sdev = cmnd->device; |
| 478 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 479 | struct urb *urb = usb_alloc_urb(0, gfp); |
| 480 | struct command_iu *iu; |
| 481 | int len; |
| 482 | |
| 483 | if (!urb) |
| 484 | goto out; |
| 485 | |
| 486 | len = cmnd->cmd_len - 16; |
| 487 | if (len < 0) |
| 488 | len = 0; |
| 489 | len = ALIGN(len, 4); |
| 490 | iu = kzalloc(sizeof(*iu) + len, gfp); |
| 491 | if (!iu) |
| 492 | goto free; |
| 493 | |
| 494 | iu->iu_id = IU_ID_COMMAND; |
| 495 | iu->tag = cpu_to_be16(cmdinfo->uas_tag); |
| 496 | iu->prio_attr = UAS_SIMPLE_TAG; |
| 497 | iu->len = len; |
| 498 | int_to_scsilun(sdev->lun, &iu->lun); |
| 499 | memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); |
| 500 | |
| 501 | usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, |
| 502 | uas_cmd_cmplt, NULL); |
| 503 | urb->transfer_flags |= URB_FREE_BUFFER; |
| 504 | out: |
| 505 | return urb; |
| 506 | free: |
| 507 | usb_free_urb(urb); |
| 508 | return NULL; |
| 509 | } |
| 510 | |
| 511 | /* |
| 512 | * Why should I request the Status IU before sending the Command IU? Spec |
| 513 | * says to, but also says the device may receive them in any order. Seems |
| 514 | * daft to me. |
| 515 | */ |
| 516 | |
| 517 | static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) |
| 518 | { |
| 519 | struct uas_dev_info *devinfo = cmnd->device->hostdata; |
| 520 | struct urb *urb; |
| 521 | int err; |
| 522 | |
| 523 | urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); |
| 524 | if (!urb) |
| 525 | return NULL; |
| 526 | usb_anchor_urb(urb, &devinfo->sense_urbs); |
| 527 | err = usb_submit_urb(urb, gfp); |
| 528 | if (err) { |
| 529 | usb_unanchor_urb(urb); |
| 530 | uas_log_cmd_state(cmnd, "sense submit err", err); |
| 531 | usb_free_urb(urb); |
| 532 | return NULL; |
| 533 | } |
| 534 | return urb; |
| 535 | } |
| 536 | |
| 537 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| 538 | struct uas_dev_info *devinfo) |
| 539 | { |
| 540 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 541 | struct urb *urb; |
| 542 | int err; |
| 543 | |
| 544 | lockdep_assert_held(&devinfo->lock); |
| 545 | if (cmdinfo->state & SUBMIT_STATUS_URB) { |
| 546 | urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); |
| 547 | if (!urb) |
| 548 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 549 | cmdinfo->state &= ~SUBMIT_STATUS_URB; |
| 550 | } |
| 551 | |
| 552 | if (cmdinfo->state & ALLOC_DATA_IN_URB) { |
| 553 | cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, |
| 554 | cmnd, DMA_FROM_DEVICE); |
| 555 | if (!cmdinfo->data_in_urb) |
| 556 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 557 | cmdinfo->state &= ~ALLOC_DATA_IN_URB; |
| 558 | } |
| 559 | |
| 560 | if (cmdinfo->state & SUBMIT_DATA_IN_URB) { |
| 561 | usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); |
| 562 | err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC); |
| 563 | if (err) { |
| 564 | usb_unanchor_urb(cmdinfo->data_in_urb); |
| 565 | uas_log_cmd_state(cmnd, "data in submit err", err); |
| 566 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 567 | } |
| 568 | cmdinfo->state &= ~SUBMIT_DATA_IN_URB; |
| 569 | cmdinfo->state |= DATA_IN_URB_INFLIGHT; |
| 570 | } |
| 571 | |
| 572 | if (cmdinfo->state & ALLOC_DATA_OUT_URB) { |
| 573 | cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, |
| 574 | cmnd, DMA_TO_DEVICE); |
| 575 | if (!cmdinfo->data_out_urb) |
| 576 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 577 | cmdinfo->state &= ~ALLOC_DATA_OUT_URB; |
| 578 | } |
| 579 | |
| 580 | if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { |
| 581 | usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); |
| 582 | err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC); |
| 583 | if (err) { |
| 584 | usb_unanchor_urb(cmdinfo->data_out_urb); |
| 585 | uas_log_cmd_state(cmnd, "data out submit err", err); |
| 586 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 587 | } |
| 588 | cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; |
| 589 | cmdinfo->state |= DATA_OUT_URB_INFLIGHT; |
| 590 | } |
| 591 | |
| 592 | if (cmdinfo->state & ALLOC_CMD_URB) { |
| 593 | cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); |
| 594 | if (!cmdinfo->cmd_urb) |
| 595 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 596 | cmdinfo->state &= ~ALLOC_CMD_URB; |
| 597 | } |
| 598 | |
| 599 | if (cmdinfo->state & SUBMIT_CMD_URB) { |
| 600 | usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); |
| 601 | err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC); |
| 602 | if (err) { |
| 603 | usb_unanchor_urb(cmdinfo->cmd_urb); |
| 604 | uas_log_cmd_state(cmnd, "cmd submit err", err); |
| 605 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 606 | } |
| 607 | cmdinfo->cmd_urb = NULL; |
| 608 | cmdinfo->state &= ~SUBMIT_CMD_URB; |
| 609 | cmdinfo->state |= COMMAND_INFLIGHT; |
| 610 | } |
| 611 | |
| 612 | return 0; |
| 613 | } |
| 614 | |
| 615 | static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, |
| 616 | void (*done)(struct scsi_cmnd *)) |
| 617 | { |
| 618 | struct scsi_device *sdev = cmnd->device; |
| 619 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 620 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 621 | unsigned long flags; |
| 622 | int idx, err; |
| 623 | |
| 624 | BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); |
| 625 | |
| 626 | /* Re-check scsi_block_requests now that we've the host-lock */ |
| 627 | if (cmnd->device->host->host_self_blocked) |
| 628 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 629 | |
| 630 | if ((devinfo->flags & US_FL_NO_ATA_1X) && |
| 631 | (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { |
| 632 | memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, |
| 633 | sizeof(usb_stor_sense_invalidCDB)); |
| 634 | cmnd->result = SAM_STAT_CHECK_CONDITION; |
| 635 | cmnd->scsi_done(cmnd); |
| 636 | return 0; |
| 637 | } |
| 638 | |
| 639 | spin_lock_irqsave(&devinfo->lock, flags); |
| 640 | |
| 641 | if (devinfo->resetting) { |
| 642 | cmnd->result = DID_ERROR << 16; |
| 643 | cmnd->scsi_done(cmnd); |
| 644 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 645 | return 0; |
| 646 | } |
| 647 | |
| 648 | /* Find a free uas-tag */ |
| 649 | for (idx = 0; idx < devinfo->qdepth; idx++) { |
| 650 | if (!devinfo->cmnd[idx]) |
| 651 | break; |
| 652 | } |
| 653 | if (idx == devinfo->qdepth) { |
| 654 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 655 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 656 | } |
| 657 | |
| 658 | cmnd->scsi_done = done; |
| 659 | |
| 660 | memset(cmdinfo, 0, sizeof(*cmdinfo)); |
| 661 | cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ |
| 662 | cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; |
| 663 | |
| 664 | switch (cmnd->sc_data_direction) { |
| 665 | case DMA_FROM_DEVICE: |
| 666 | cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| 667 | break; |
| 668 | case DMA_BIDIRECTIONAL: |
| 669 | cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| 670 | /* fall through */ |
| 671 | case DMA_TO_DEVICE: |
| 672 | cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; |
| 673 | case DMA_NONE: |
| 674 | break; |
| 675 | } |
| 676 | |
| 677 | if (!devinfo->use_streams) |
| 678 | cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); |
| 679 | |
| 680 | err = uas_submit_urbs(cmnd, devinfo); |
| 681 | if (err) { |
| 682 | /* If we did nothing, give up now */ |
| 683 | if (cmdinfo->state & SUBMIT_STATUS_URB) { |
| 684 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 685 | return SCSI_MLQUEUE_DEVICE_BUSY; |
| 686 | } |
| 687 | uas_add_work(cmdinfo); |
| 688 | } |
| 689 | |
| 690 | devinfo->cmnd[idx] = cmnd; |
| 691 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 692 | return 0; |
| 693 | } |
| 694 | |
| 695 | static DEF_SCSI_QCMD(uas_queuecommand) |
| 696 | |
| 697 | /* |
| 698 | * For now we do not support actually sending an abort to the device, so |
| 699 | * this eh always fails. Still we must define it to make sure that we've |
| 700 | * dropped all references to the cmnd in question once this function exits. |
| 701 | */ |
| 702 | static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) |
| 703 | { |
| 704 | struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| 705 | struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| 706 | struct urb *data_in_urb = NULL; |
| 707 | struct urb *data_out_urb = NULL; |
| 708 | unsigned long flags; |
| 709 | |
| 710 | spin_lock_irqsave(&devinfo->lock, flags); |
| 711 | |
| 712 | uas_log_cmd_state(cmnd, __func__, 0); |
| 713 | |
| 714 | /* Ensure that try_complete does not call scsi_done */ |
| 715 | cmdinfo->state |= COMMAND_ABORTED; |
| 716 | |
| 717 | /* Drop all refs to this cmnd, kill data urbs to break their ref */ |
| 718 | devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; |
| 719 | if (cmdinfo->state & DATA_IN_URB_INFLIGHT) |
| 720 | data_in_urb = usb_get_urb(cmdinfo->data_in_urb); |
| 721 | if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) |
| 722 | data_out_urb = usb_get_urb(cmdinfo->data_out_urb); |
| 723 | |
| 724 | uas_free_unsubmitted_urbs(cmnd); |
| 725 | |
| 726 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 727 | |
| 728 | if (data_in_urb) { |
| 729 | usb_kill_urb(data_in_urb); |
| 730 | usb_put_urb(data_in_urb); |
| 731 | } |
| 732 | if (data_out_urb) { |
| 733 | usb_kill_urb(data_out_urb); |
| 734 | usb_put_urb(data_out_urb); |
| 735 | } |
| 736 | |
| 737 | return FAILED; |
| 738 | } |
| 739 | |
| 740 | static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) |
| 741 | { |
| 742 | struct scsi_device *sdev = cmnd->device; |
| 743 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 744 | struct usb_device *udev = devinfo->udev; |
| 745 | unsigned long flags; |
| 746 | int err; |
| 747 | |
| 748 | err = usb_lock_device_for_reset(udev, devinfo->intf); |
| 749 | if (err) { |
| 750 | shost_printk(KERN_ERR, sdev->host, |
| 751 | "%s FAILED to get lock err %d\n", __func__, err); |
| 752 | return FAILED; |
| 753 | } |
| 754 | |
| 755 | shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); |
| 756 | |
| 757 | spin_lock_irqsave(&devinfo->lock, flags); |
| 758 | devinfo->resetting = 1; |
| 759 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 760 | |
| 761 | usb_kill_anchored_urbs(&devinfo->cmd_urbs); |
| 762 | usb_kill_anchored_urbs(&devinfo->sense_urbs); |
| 763 | usb_kill_anchored_urbs(&devinfo->data_urbs); |
| 764 | uas_zap_pending(devinfo, DID_RESET); |
| 765 | |
| 766 | err = usb_reset_device(udev); |
| 767 | |
| 768 | spin_lock_irqsave(&devinfo->lock, flags); |
| 769 | devinfo->resetting = 0; |
| 770 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 771 | |
| 772 | usb_unlock_device(udev); |
| 773 | |
| 774 | if (err) { |
| 775 | shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n", |
| 776 | __func__, err); |
| 777 | return FAILED; |
| 778 | } |
| 779 | |
| 780 | shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); |
| 781 | return SUCCESS; |
| 782 | } |
| 783 | |
| 784 | static int uas_target_alloc(struct scsi_target *starget) |
| 785 | { |
| 786 | struct uas_dev_info *devinfo = (struct uas_dev_info *) |
| 787 | dev_to_shost(starget->dev.parent)->hostdata; |
| 788 | |
| 789 | if (devinfo->flags & US_FL_NO_REPORT_LUNS) |
| 790 | starget->no_report_luns = 1; |
| 791 | |
| 792 | return 0; |
| 793 | } |
| 794 | |
| 795 | static int uas_slave_alloc(struct scsi_device *sdev) |
| 796 | { |
| 797 | struct uas_dev_info *devinfo = |
| 798 | (struct uas_dev_info *)sdev->host->hostdata; |
| 799 | |
| 800 | sdev->hostdata = devinfo; |
| 801 | |
| 802 | /* |
| 803 | * USB has unusual DMA-alignment requirements: Although the |
| 804 | * starting address of each scatter-gather element doesn't matter, |
| 805 | * the length of each element except the last must be divisible |
| 806 | * by the Bulk maxpacket value. There's currently no way to |
| 807 | * express this by block-layer constraints, so we'll cop out |
| 808 | * and simply require addresses to be aligned at 512-byte |
| 809 | * boundaries. This is okay since most block I/O involves |
| 810 | * hardware sectors that are multiples of 512 bytes in length, |
| 811 | * and since host controllers up through USB 2.0 have maxpacket |
| 812 | * values no larger than 512. |
| 813 | * |
| 814 | * But it doesn't suffice for Wireless USB, where Bulk maxpacket |
| 815 | * values can be as large as 2048. To make that work properly |
| 816 | * will require changes to the block layer. |
| 817 | */ |
| 818 | blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); |
| 819 | |
| 820 | if (devinfo->flags & US_FL_MAX_SECTORS_64) |
| 821 | blk_queue_max_hw_sectors(sdev->request_queue, 64); |
| 822 | else if (devinfo->flags & US_FL_MAX_SECTORS_240) |
| 823 | blk_queue_max_hw_sectors(sdev->request_queue, 240); |
| 824 | |
| 825 | return 0; |
| 826 | } |
| 827 | |
| 828 | static int uas_slave_configure(struct scsi_device *sdev) |
| 829 | { |
| 830 | struct uas_dev_info *devinfo = sdev->hostdata; |
| 831 | |
| 832 | if (devinfo->flags & US_FL_NO_REPORT_OPCODES) |
| 833 | sdev->no_report_opcodes = 1; |
| 834 | |
| 835 | /* A few buggy USB-ATA bridges don't understand FUA */ |
| 836 | if (devinfo->flags & US_FL_BROKEN_FUA) |
| 837 | sdev->broken_fua = 1; |
| 838 | |
| 839 | /* UAS also needs to support FL_ALWAYS_SYNC */ |
| 840 | if (devinfo->flags & US_FL_ALWAYS_SYNC) { |
| 841 | sdev->skip_ms_page_3f = 1; |
| 842 | sdev->skip_ms_page_8 = 1; |
| 843 | sdev->wce_default_on = 1; |
| 844 | } |
| 845 | |
| 846 | /* |
| 847 | * Some disks return the total number of blocks in response |
| 848 | * to READ CAPACITY rather than the highest block number. |
| 849 | * If this device makes that mistake, tell the sd driver. |
| 850 | */ |
| 851 | if (devinfo->flags & US_FL_FIX_CAPACITY) |
| 852 | sdev->fix_capacity = 1; |
| 853 | |
| 854 | /* |
| 855 | * Some devices don't like MODE SENSE with page=0x3f, |
| 856 | * which is the command used for checking if a device |
| 857 | * is write-protected. Now that we tell the sd driver |
| 858 | * to do a 192-byte transfer with this command the |
| 859 | * majority of devices work fine, but a few still can't |
| 860 | * handle it. The sd driver will simply assume those |
| 861 | * devices are write-enabled. |
| 862 | */ |
| 863 | if (devinfo->flags & US_FL_NO_WP_DETECT) |
| 864 | sdev->skip_ms_page_3f = 1; |
| 865 | |
| 866 | scsi_change_queue_depth(sdev, devinfo->qdepth - 2); |
| 867 | return 0; |
| 868 | } |
| 869 | |
| 870 | static struct scsi_host_template uas_host_template = { |
| 871 | .module = THIS_MODULE, |
| 872 | .name = "uas", |
| 873 | .queuecommand = uas_queuecommand, |
| 874 | .target_alloc = uas_target_alloc, |
| 875 | .slave_alloc = uas_slave_alloc, |
| 876 | .slave_configure = uas_slave_configure, |
| 877 | .eh_abort_handler = uas_eh_abort_handler, |
| 878 | .eh_device_reset_handler = uas_eh_device_reset_handler, |
| 879 | .this_id = -1, |
| 880 | .sg_tablesize = SG_NONE, |
| 881 | .skip_settle_delay = 1, |
| 882 | }; |
| 883 | |
| 884 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ |
| 885 | vendorName, productName, useProtocol, useTransport, \ |
| 886 | initFunction, flags) \ |
| 887 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ |
| 888 | .driver_info = (flags) } |
| 889 | |
| 890 | static struct usb_device_id uas_usb_ids[] = { |
| 891 | # include "unusual_uas.h" |
| 892 | { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, |
| 893 | { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, |
| 894 | { } |
| 895 | }; |
| 896 | MODULE_DEVICE_TABLE(usb, uas_usb_ids); |
| 897 | |
| 898 | #undef UNUSUAL_DEV |
| 899 | |
| 900 | static int uas_switch_interface(struct usb_device *udev, |
| 901 | struct usb_interface *intf) |
| 902 | { |
| 903 | struct usb_host_interface *alt; |
| 904 | |
| 905 | alt = uas_find_uas_alt_setting(intf); |
| 906 | if (!alt) |
| 907 | return -ENODEV; |
| 908 | |
| 909 | return usb_set_interface(udev, alt->desc.bInterfaceNumber, |
| 910 | alt->desc.bAlternateSetting); |
| 911 | } |
| 912 | |
| 913 | static int uas_configure_endpoints(struct uas_dev_info *devinfo) |
| 914 | { |
| 915 | struct usb_host_endpoint *eps[4] = { }; |
| 916 | struct usb_device *udev = devinfo->udev; |
| 917 | int r; |
| 918 | |
| 919 | r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); |
| 920 | if (r) |
| 921 | return r; |
| 922 | |
| 923 | devinfo->cmd_pipe = usb_sndbulkpipe(udev, |
| 924 | usb_endpoint_num(&eps[0]->desc)); |
| 925 | devinfo->status_pipe = usb_rcvbulkpipe(udev, |
| 926 | usb_endpoint_num(&eps[1]->desc)); |
| 927 | devinfo->data_in_pipe = usb_rcvbulkpipe(udev, |
| 928 | usb_endpoint_num(&eps[2]->desc)); |
| 929 | devinfo->data_out_pipe = usb_sndbulkpipe(udev, |
| 930 | usb_endpoint_num(&eps[3]->desc)); |
| 931 | |
| 932 | if (udev->speed < USB_SPEED_SUPER) { |
| 933 | devinfo->qdepth = 32; |
| 934 | devinfo->use_streams = 0; |
| 935 | } else { |
| 936 | devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, |
| 937 | 3, MAX_CMNDS, GFP_NOIO); |
| 938 | if (devinfo->qdepth < 0) |
| 939 | return devinfo->qdepth; |
| 940 | devinfo->use_streams = 1; |
| 941 | } |
| 942 | |
| 943 | return 0; |
| 944 | } |
| 945 | |
| 946 | static void uas_free_streams(struct uas_dev_info *devinfo) |
| 947 | { |
| 948 | struct usb_device *udev = devinfo->udev; |
| 949 | struct usb_host_endpoint *eps[3]; |
| 950 | |
| 951 | eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| 952 | eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| 953 | eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| 954 | usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO); |
| 955 | } |
| 956 | |
| 957 | static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| 958 | { |
| 959 | int result = -ENOMEM; |
| 960 | struct Scsi_Host *shost = NULL; |
| 961 | struct uas_dev_info *devinfo; |
| 962 | struct usb_device *udev = interface_to_usbdev(intf); |
| 963 | unsigned long dev_flags; |
| 964 | |
| 965 | if (!uas_use_uas_driver(intf, id, &dev_flags)) |
| 966 | return -ENODEV; |
| 967 | |
| 968 | if (uas_switch_interface(udev, intf)) |
| 969 | return -ENODEV; |
| 970 | |
| 971 | shost = scsi_host_alloc(&uas_host_template, |
| 972 | sizeof(struct uas_dev_info)); |
| 973 | if (!shost) |
| 974 | goto set_alt0; |
| 975 | |
| 976 | shost->max_cmd_len = 16 + 252; |
| 977 | shost->max_id = 1; |
| 978 | shost->max_lun = 256; |
| 979 | shost->max_channel = 0; |
| 980 | shost->sg_tablesize = udev->bus->sg_tablesize; |
| 981 | |
| 982 | devinfo = (struct uas_dev_info *)shost->hostdata; |
| 983 | devinfo->intf = intf; |
| 984 | devinfo->udev = udev; |
| 985 | devinfo->resetting = 0; |
| 986 | devinfo->shutdown = 0; |
| 987 | devinfo->flags = dev_flags; |
| 988 | init_usb_anchor(&devinfo->cmd_urbs); |
| 989 | init_usb_anchor(&devinfo->sense_urbs); |
| 990 | init_usb_anchor(&devinfo->data_urbs); |
| 991 | spin_lock_init(&devinfo->lock); |
| 992 | INIT_WORK(&devinfo->work, uas_do_work); |
| 993 | |
| 994 | result = uas_configure_endpoints(devinfo); |
| 995 | if (result) |
| 996 | goto set_alt0; |
| 997 | |
| 998 | /* |
| 999 | * 1 tag is reserved for untagged commands + |
| 1000 | * 1 tag to avoid off by one errors in some bridge firmwares |
| 1001 | */ |
| 1002 | shost->can_queue = devinfo->qdepth - 2; |
| 1003 | |
| 1004 | usb_set_intfdata(intf, shost); |
| 1005 | result = scsi_add_host(shost, &intf->dev); |
| 1006 | if (result) |
| 1007 | goto free_streams; |
| 1008 | |
| 1009 | scsi_scan_host(shost); |
| 1010 | return result; |
| 1011 | |
| 1012 | free_streams: |
| 1013 | uas_free_streams(devinfo); |
| 1014 | usb_set_intfdata(intf, NULL); |
| 1015 | set_alt0: |
| 1016 | usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); |
| 1017 | if (shost) |
| 1018 | scsi_host_put(shost); |
| 1019 | return result; |
| 1020 | } |
| 1021 | |
| 1022 | static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) |
| 1023 | { |
| 1024 | unsigned long flags; |
| 1025 | int i, r = 1; |
| 1026 | |
| 1027 | spin_lock_irqsave(&devinfo->lock, flags); |
| 1028 | |
| 1029 | for (i = 0; i < devinfo->qdepth; i++) { |
| 1030 | if (devinfo->cmnd[i]) { |
| 1031 | r = 0; /* Not empty */ |
| 1032 | break; |
| 1033 | } |
| 1034 | } |
| 1035 | |
| 1036 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 1037 | |
| 1038 | return r; |
| 1039 | } |
| 1040 | |
| 1041 | /* |
| 1042 | * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily |
| 1043 | * get empty while there still is more work to do due to sense-urbs completing |
| 1044 | * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. |
| 1045 | */ |
| 1046 | static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) |
| 1047 | { |
| 1048 | unsigned long start_time; |
| 1049 | int r; |
| 1050 | |
| 1051 | start_time = jiffies; |
| 1052 | do { |
| 1053 | flush_work(&devinfo->work); |
| 1054 | |
| 1055 | r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); |
| 1056 | if (r == 0) |
| 1057 | return -ETIME; |
| 1058 | |
| 1059 | r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); |
| 1060 | if (r == 0) |
| 1061 | return -ETIME; |
| 1062 | |
| 1063 | if (time_after(jiffies, start_time + 5 * HZ)) |
| 1064 | return -ETIME; |
| 1065 | } while (!uas_cmnd_list_empty(devinfo)); |
| 1066 | |
| 1067 | return 0; |
| 1068 | } |
| 1069 | |
| 1070 | static int uas_pre_reset(struct usb_interface *intf) |
| 1071 | { |
| 1072 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1073 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1074 | unsigned long flags; |
| 1075 | |
| 1076 | if (devinfo->shutdown) |
| 1077 | return 0; |
| 1078 | |
| 1079 | /* Block new requests */ |
| 1080 | spin_lock_irqsave(shost->host_lock, flags); |
| 1081 | scsi_block_requests(shost); |
| 1082 | spin_unlock_irqrestore(shost->host_lock, flags); |
| 1083 | |
| 1084 | if (uas_wait_for_pending_cmnds(devinfo) != 0) { |
| 1085 | shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); |
| 1086 | scsi_unblock_requests(shost); |
| 1087 | return 1; |
| 1088 | } |
| 1089 | |
| 1090 | uas_free_streams(devinfo); |
| 1091 | |
| 1092 | return 0; |
| 1093 | } |
| 1094 | |
| 1095 | static int uas_post_reset(struct usb_interface *intf) |
| 1096 | { |
| 1097 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1098 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1099 | unsigned long flags; |
| 1100 | int err; |
| 1101 | |
| 1102 | if (devinfo->shutdown) |
| 1103 | return 0; |
| 1104 | |
| 1105 | err = uas_configure_endpoints(devinfo); |
| 1106 | if (err && err != -ENODEV) |
| 1107 | shost_printk(KERN_ERR, shost, |
| 1108 | "%s: alloc streams error %d after reset", |
| 1109 | __func__, err); |
| 1110 | |
| 1111 | /* we must unblock the host in every case lest we deadlock */ |
| 1112 | spin_lock_irqsave(shost->host_lock, flags); |
| 1113 | scsi_report_bus_reset(shost, 0); |
| 1114 | spin_unlock_irqrestore(shost->host_lock, flags); |
| 1115 | |
| 1116 | scsi_unblock_requests(shost); |
| 1117 | |
| 1118 | return err ? 1 : 0; |
| 1119 | } |
| 1120 | |
| 1121 | static int uas_suspend(struct usb_interface *intf, pm_message_t message) |
| 1122 | { |
| 1123 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1124 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1125 | |
| 1126 | if (uas_wait_for_pending_cmnds(devinfo) != 0) { |
| 1127 | shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); |
| 1128 | return -ETIME; |
| 1129 | } |
| 1130 | |
| 1131 | return 0; |
| 1132 | } |
| 1133 | |
| 1134 | static int uas_resume(struct usb_interface *intf) |
| 1135 | { |
| 1136 | return 0; |
| 1137 | } |
| 1138 | |
| 1139 | static int uas_reset_resume(struct usb_interface *intf) |
| 1140 | { |
| 1141 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1142 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1143 | unsigned long flags; |
| 1144 | int err; |
| 1145 | |
| 1146 | err = uas_configure_endpoints(devinfo); |
| 1147 | if (err) { |
| 1148 | shost_printk(KERN_ERR, shost, |
| 1149 | "%s: alloc streams error %d after reset", |
| 1150 | __func__, err); |
| 1151 | return -EIO; |
| 1152 | } |
| 1153 | |
| 1154 | spin_lock_irqsave(shost->host_lock, flags); |
| 1155 | scsi_report_bus_reset(shost, 0); |
| 1156 | spin_unlock_irqrestore(shost->host_lock, flags); |
| 1157 | |
| 1158 | return 0; |
| 1159 | } |
| 1160 | |
| 1161 | static void uas_disconnect(struct usb_interface *intf) |
| 1162 | { |
| 1163 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1164 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1165 | unsigned long flags; |
| 1166 | |
| 1167 | spin_lock_irqsave(&devinfo->lock, flags); |
| 1168 | devinfo->resetting = 1; |
| 1169 | spin_unlock_irqrestore(&devinfo->lock, flags); |
| 1170 | |
| 1171 | cancel_work_sync(&devinfo->work); |
| 1172 | usb_kill_anchored_urbs(&devinfo->cmd_urbs); |
| 1173 | usb_kill_anchored_urbs(&devinfo->sense_urbs); |
| 1174 | usb_kill_anchored_urbs(&devinfo->data_urbs); |
| 1175 | uas_zap_pending(devinfo, DID_NO_CONNECT); |
| 1176 | |
| 1177 | scsi_remove_host(shost); |
| 1178 | uas_free_streams(devinfo); |
| 1179 | scsi_host_put(shost); |
| 1180 | } |
| 1181 | |
| 1182 | /* |
| 1183 | * Put the device back in usb-storage mode on shutdown, as some BIOS-es |
| 1184 | * hang on reboot when the device is still in uas mode. Note the reset is |
| 1185 | * necessary as some devices won't revert to usb-storage mode without it. |
| 1186 | */ |
| 1187 | static void uas_shutdown(struct device *dev) |
| 1188 | { |
| 1189 | struct usb_interface *intf = to_usb_interface(dev); |
| 1190 | struct usb_device *udev = interface_to_usbdev(intf); |
| 1191 | struct Scsi_Host *shost = usb_get_intfdata(intf); |
| 1192 | struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| 1193 | |
| 1194 | if (system_state != SYSTEM_RESTART) |
| 1195 | return; |
| 1196 | |
| 1197 | devinfo->shutdown = 1; |
| 1198 | uas_free_streams(devinfo); |
| 1199 | usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); |
| 1200 | usb_reset_device(udev); |
| 1201 | } |
| 1202 | |
| 1203 | static struct usb_driver uas_driver = { |
| 1204 | .name = "uas", |
| 1205 | .probe = uas_probe, |
| 1206 | .disconnect = uas_disconnect, |
| 1207 | .pre_reset = uas_pre_reset, |
| 1208 | .post_reset = uas_post_reset, |
| 1209 | .suspend = uas_suspend, |
| 1210 | .resume = uas_resume, |
| 1211 | .reset_resume = uas_reset_resume, |
| 1212 | .drvwrap.driver.shutdown = uas_shutdown, |
| 1213 | .id_table = uas_usb_ids, |
| 1214 | }; |
| 1215 | |
| 1216 | module_usb_driver(uas_driver); |
| 1217 | |
| 1218 | MODULE_LICENSE("GPL"); |
| 1219 | MODULE_AUTHOR( |
| 1220 | "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); |