Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Apple Cinema Display driver |
| 4 | * |
| 5 | * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch) |
| 6 | * |
| 7 | * Thanks to Caskey L. Dickson for his work with acdctl. |
| 8 | */ |
| 9 | |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/errno.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/slab.h> |
| 15 | #include <linux/usb.h> |
| 16 | #include <linux/backlight.h> |
| 17 | #include <linux/timer.h> |
| 18 | #include <linux/workqueue.h> |
| 19 | #include <linux/atomic.h> |
| 20 | |
| 21 | #define APPLE_VENDOR_ID 0x05AC |
| 22 | |
| 23 | #define USB_REQ_GET_REPORT 0x01 |
| 24 | #define USB_REQ_SET_REPORT 0x09 |
| 25 | |
| 26 | #define ACD_USB_TIMEOUT 250 |
| 27 | |
| 28 | #define ACD_USB_EDID 0x0302 |
| 29 | #define ACD_USB_BRIGHTNESS 0x0310 |
| 30 | |
| 31 | #define ACD_BTN_NONE 0 |
| 32 | #define ACD_BTN_BRIGHT_UP 3 |
| 33 | #define ACD_BTN_BRIGHT_DOWN 4 |
| 34 | |
| 35 | #define ACD_URB_BUFFER_LEN 2 |
| 36 | #define ACD_MSG_BUFFER_LEN 2 |
| 37 | |
| 38 | #define APPLEDISPLAY_DEVICE(prod) \ |
| 39 | .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ |
| 40 | USB_DEVICE_ID_MATCH_INT_CLASS | \ |
| 41 | USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ |
| 42 | .idVendor = APPLE_VENDOR_ID, \ |
| 43 | .idProduct = (prod), \ |
| 44 | .bInterfaceClass = USB_CLASS_HID, \ |
| 45 | .bInterfaceProtocol = 0x00 |
| 46 | |
| 47 | /* table of devices that work with this driver */ |
| 48 | static const struct usb_device_id appledisplay_table[] = { |
| 49 | { APPLEDISPLAY_DEVICE(0x9218) }, |
| 50 | { APPLEDISPLAY_DEVICE(0x9219) }, |
| 51 | { APPLEDISPLAY_DEVICE(0x921c) }, |
| 52 | { APPLEDISPLAY_DEVICE(0x921d) }, |
| 53 | { APPLEDISPLAY_DEVICE(0x9222) }, |
| 54 | { APPLEDISPLAY_DEVICE(0x9226) }, |
| 55 | { APPLEDISPLAY_DEVICE(0x9236) }, |
| 56 | |
| 57 | /* Terminating entry */ |
| 58 | { } |
| 59 | }; |
| 60 | MODULE_DEVICE_TABLE(usb, appledisplay_table); |
| 61 | |
| 62 | /* Structure to hold all of our device specific stuff */ |
| 63 | struct appledisplay { |
| 64 | struct usb_device *udev; /* usb device */ |
| 65 | struct urb *urb; /* usb request block */ |
| 66 | struct backlight_device *bd; /* backlight device */ |
| 67 | u8 *urbdata; /* interrupt URB data buffer */ |
| 68 | u8 *msgdata; /* control message data buffer */ |
| 69 | |
| 70 | struct delayed_work work; |
| 71 | int button_pressed; |
| 72 | spinlock_t lock; |
| 73 | struct mutex sysfslock; /* concurrent read and write */ |
| 74 | }; |
| 75 | |
| 76 | static atomic_t count_displays = ATOMIC_INIT(0); |
| 77 | |
| 78 | static void appledisplay_complete(struct urb *urb) |
| 79 | { |
| 80 | struct appledisplay *pdata = urb->context; |
| 81 | struct device *dev = &pdata->udev->dev; |
| 82 | unsigned long flags; |
| 83 | int status = urb->status; |
| 84 | int retval; |
| 85 | |
| 86 | switch (status) { |
| 87 | case 0: |
| 88 | /* success */ |
| 89 | break; |
| 90 | case -EOVERFLOW: |
| 91 | dev_err(dev, |
| 92 | "OVERFLOW with data length %d, actual length is %d\n", |
| 93 | ACD_URB_BUFFER_LEN, pdata->urb->actual_length); |
| 94 | /* fall through */ |
| 95 | case -ECONNRESET: |
| 96 | case -ENOENT: |
| 97 | case -ESHUTDOWN: |
| 98 | /* This urb is terminated, clean up */ |
| 99 | dev_dbg(dev, "%s - urb shuttingdown with status: %d\n", |
| 100 | __func__, status); |
| 101 | return; |
| 102 | default: |
| 103 | dev_dbg(dev, "%s - nonzero urb status received: %d\n", |
| 104 | __func__, status); |
| 105 | goto exit; |
| 106 | } |
| 107 | |
| 108 | spin_lock_irqsave(&pdata->lock, flags); |
| 109 | |
| 110 | switch(pdata->urbdata[1]) { |
| 111 | case ACD_BTN_BRIGHT_UP: |
| 112 | case ACD_BTN_BRIGHT_DOWN: |
| 113 | pdata->button_pressed = 1; |
| 114 | schedule_delayed_work(&pdata->work, 0); |
| 115 | break; |
| 116 | case ACD_BTN_NONE: |
| 117 | default: |
| 118 | pdata->button_pressed = 0; |
| 119 | break; |
| 120 | } |
| 121 | |
| 122 | spin_unlock_irqrestore(&pdata->lock, flags); |
| 123 | |
| 124 | exit: |
| 125 | retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); |
| 126 | if (retval) { |
| 127 | dev_err(dev, "%s - usb_submit_urb failed with result %d\n", |
| 128 | __func__, retval); |
| 129 | } |
| 130 | } |
| 131 | |
| 132 | static int appledisplay_bl_update_status(struct backlight_device *bd) |
| 133 | { |
| 134 | struct appledisplay *pdata = bl_get_data(bd); |
| 135 | int retval; |
| 136 | |
| 137 | mutex_lock(&pdata->sysfslock); |
| 138 | pdata->msgdata[0] = 0x10; |
| 139 | pdata->msgdata[1] = bd->props.brightness; |
| 140 | |
| 141 | retval = usb_control_msg( |
| 142 | pdata->udev, |
| 143 | usb_sndctrlpipe(pdata->udev, 0), |
| 144 | USB_REQ_SET_REPORT, |
| 145 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 146 | ACD_USB_BRIGHTNESS, |
| 147 | 0, |
| 148 | pdata->msgdata, 2, |
| 149 | ACD_USB_TIMEOUT); |
| 150 | mutex_unlock(&pdata->sysfslock); |
| 151 | |
| 152 | return retval; |
| 153 | } |
| 154 | |
| 155 | static int appledisplay_bl_get_brightness(struct backlight_device *bd) |
| 156 | { |
| 157 | struct appledisplay *pdata = bl_get_data(bd); |
| 158 | int retval, brightness; |
| 159 | |
| 160 | mutex_lock(&pdata->sysfslock); |
| 161 | retval = usb_control_msg( |
| 162 | pdata->udev, |
| 163 | usb_rcvctrlpipe(pdata->udev, 0), |
| 164 | USB_REQ_GET_REPORT, |
| 165 | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 166 | ACD_USB_BRIGHTNESS, |
| 167 | 0, |
| 168 | pdata->msgdata, 2, |
| 169 | ACD_USB_TIMEOUT); |
| 170 | brightness = pdata->msgdata[1]; |
| 171 | mutex_unlock(&pdata->sysfslock); |
| 172 | |
| 173 | if (retval < 0) |
| 174 | return retval; |
| 175 | else |
| 176 | return brightness; |
| 177 | } |
| 178 | |
| 179 | static const struct backlight_ops appledisplay_bl_data = { |
| 180 | .get_brightness = appledisplay_bl_get_brightness, |
| 181 | .update_status = appledisplay_bl_update_status, |
| 182 | }; |
| 183 | |
| 184 | static void appledisplay_work(struct work_struct *work) |
| 185 | { |
| 186 | struct appledisplay *pdata = |
| 187 | container_of(work, struct appledisplay, work.work); |
| 188 | int retval; |
| 189 | |
| 190 | retval = appledisplay_bl_get_brightness(pdata->bd); |
| 191 | if (retval >= 0) |
| 192 | pdata->bd->props.brightness = retval; |
| 193 | |
| 194 | /* Poll again in about 125ms if there's still a button pressed */ |
| 195 | if (pdata->button_pressed) |
| 196 | schedule_delayed_work(&pdata->work, HZ / 8); |
| 197 | } |
| 198 | |
| 199 | static int appledisplay_probe(struct usb_interface *iface, |
| 200 | const struct usb_device_id *id) |
| 201 | { |
| 202 | struct backlight_properties props; |
| 203 | struct appledisplay *pdata; |
| 204 | struct usb_device *udev = interface_to_usbdev(iface); |
| 205 | struct usb_endpoint_descriptor *endpoint; |
| 206 | int int_in_endpointAddr = 0; |
| 207 | int retval, brightness; |
| 208 | char bl_name[20]; |
| 209 | |
| 210 | /* set up the endpoint information */ |
| 211 | /* use only the first interrupt-in endpoint */ |
| 212 | retval = usb_find_int_in_endpoint(iface->cur_altsetting, &endpoint); |
| 213 | if (retval) { |
| 214 | dev_err(&iface->dev, "Could not find int-in endpoint\n"); |
| 215 | return retval; |
| 216 | } |
| 217 | |
| 218 | int_in_endpointAddr = endpoint->bEndpointAddress; |
| 219 | |
| 220 | /* allocate memory for our device state and initialize it */ |
| 221 | pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); |
| 222 | if (!pdata) { |
| 223 | retval = -ENOMEM; |
| 224 | goto error; |
| 225 | } |
| 226 | |
| 227 | pdata->udev = udev; |
| 228 | |
| 229 | spin_lock_init(&pdata->lock); |
| 230 | INIT_DELAYED_WORK(&pdata->work, appledisplay_work); |
| 231 | mutex_init(&pdata->sysfslock); |
| 232 | |
| 233 | /* Allocate buffer for control messages */ |
| 234 | pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); |
| 235 | if (!pdata->msgdata) { |
| 236 | retval = -ENOMEM; |
| 237 | goto error; |
| 238 | } |
| 239 | |
| 240 | /* Allocate interrupt URB */ |
| 241 | pdata->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 242 | if (!pdata->urb) { |
| 243 | retval = -ENOMEM; |
| 244 | goto error; |
| 245 | } |
| 246 | |
| 247 | /* Allocate buffer for interrupt data */ |
| 248 | pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 249 | GFP_KERNEL, &pdata->urb->transfer_dma); |
| 250 | if (!pdata->urbdata) { |
| 251 | retval = -ENOMEM; |
| 252 | dev_err(&iface->dev, "Allocating URB buffer failed\n"); |
| 253 | goto error; |
| 254 | } |
| 255 | |
| 256 | /* Configure interrupt URB */ |
| 257 | usb_fill_int_urb(pdata->urb, udev, |
| 258 | usb_rcvintpipe(udev, int_in_endpointAddr), |
| 259 | pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, |
| 260 | pdata, 1); |
| 261 | if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { |
| 262 | retval = -EIO; |
| 263 | dev_err(&iface->dev, "Submitting URB failed\n"); |
| 264 | goto error; |
| 265 | } |
| 266 | |
| 267 | /* Register backlight device */ |
| 268 | snprintf(bl_name, sizeof(bl_name), "appledisplay%d", |
| 269 | atomic_inc_return(&count_displays) - 1); |
| 270 | memset(&props, 0, sizeof(struct backlight_properties)); |
| 271 | props.type = BACKLIGHT_RAW; |
| 272 | props.max_brightness = 0xff; |
| 273 | pdata->bd = backlight_device_register(bl_name, NULL, pdata, |
| 274 | &appledisplay_bl_data, &props); |
| 275 | if (IS_ERR(pdata->bd)) { |
| 276 | dev_err(&iface->dev, "Backlight registration failed\n"); |
| 277 | retval = PTR_ERR(pdata->bd); |
| 278 | goto error; |
| 279 | } |
| 280 | |
| 281 | /* Try to get brightness */ |
| 282 | brightness = appledisplay_bl_get_brightness(pdata->bd); |
| 283 | |
| 284 | if (brightness < 0) { |
| 285 | retval = brightness; |
| 286 | dev_err(&iface->dev, |
| 287 | "Error while getting initial brightness: %d\n", retval); |
| 288 | goto error; |
| 289 | } |
| 290 | |
| 291 | /* Set brightness in backlight device */ |
| 292 | pdata->bd->props.brightness = brightness; |
| 293 | |
| 294 | /* save our data pointer in the interface device */ |
| 295 | usb_set_intfdata(iface, pdata); |
| 296 | |
| 297 | printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n"); |
| 298 | |
| 299 | return 0; |
| 300 | |
| 301 | error: |
| 302 | if (pdata) { |
| 303 | if (pdata->urb) { |
| 304 | usb_kill_urb(pdata->urb); |
| 305 | if (pdata->urbdata) |
| 306 | usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 307 | pdata->urbdata, pdata->urb->transfer_dma); |
| 308 | usb_free_urb(pdata->urb); |
| 309 | } |
| 310 | if (!IS_ERR(pdata->bd)) |
| 311 | backlight_device_unregister(pdata->bd); |
| 312 | kfree(pdata->msgdata); |
| 313 | } |
| 314 | usb_set_intfdata(iface, NULL); |
| 315 | kfree(pdata); |
| 316 | return retval; |
| 317 | } |
| 318 | |
| 319 | static void appledisplay_disconnect(struct usb_interface *iface) |
| 320 | { |
| 321 | struct appledisplay *pdata = usb_get_intfdata(iface); |
| 322 | |
| 323 | if (pdata) { |
| 324 | usb_kill_urb(pdata->urb); |
| 325 | cancel_delayed_work_sync(&pdata->work); |
| 326 | backlight_device_unregister(pdata->bd); |
| 327 | usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 328 | pdata->urbdata, pdata->urb->transfer_dma); |
| 329 | usb_free_urb(pdata->urb); |
| 330 | kfree(pdata->msgdata); |
| 331 | kfree(pdata); |
| 332 | } |
| 333 | |
| 334 | printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n"); |
| 335 | } |
| 336 | |
| 337 | static struct usb_driver appledisplay_driver = { |
| 338 | .name = "appledisplay", |
| 339 | .probe = appledisplay_probe, |
| 340 | .disconnect = appledisplay_disconnect, |
| 341 | .id_table = appledisplay_table, |
| 342 | }; |
| 343 | |
| 344 | static int __init appledisplay_init(void) |
| 345 | { |
| 346 | return usb_register(&appledisplay_driver); |
| 347 | } |
| 348 | |
| 349 | static void __exit appledisplay_exit(void) |
| 350 | { |
| 351 | usb_deregister(&appledisplay_driver); |
| 352 | } |
| 353 | |
| 354 | MODULE_AUTHOR("Michael Hanselmann"); |
| 355 | MODULE_DESCRIPTION("Apple Cinema Display driver"); |
| 356 | MODULE_LICENSE("GPL"); |
| 357 | |
| 358 | module_init(appledisplay_init); |
| 359 | module_exit(appledisplay_exit); |