Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | /* |
| 2 | * linux/arch/arm/mach-omap2/io.c |
| 3 | * |
| 4 | * OMAP2 I/O mapping code |
| 5 | * |
| 6 | * Copyright (C) 2005 Nokia Corporation |
| 7 | * Copyright (C) 2007-2009 Texas Instruments |
| 8 | * |
| 9 | * Author: |
| 10 | * Juha Yrjola <juha.yrjola@nokia.com> |
| 11 | * Syed Khasim <x0khasim@ti.com> |
| 12 | * |
| 13 | * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or modify |
| 16 | * it under the terms of the GNU General Public License version 2 as |
| 17 | * published by the Free Software Foundation. |
| 18 | */ |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/kernel.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/io.h> |
| 23 | #include <linux/clk.h> |
| 24 | |
| 25 | #include <asm/tlb.h> |
| 26 | #include <asm/mach/map.h> |
| 27 | |
| 28 | #include <linux/omap-dma.h> |
| 29 | |
| 30 | #include "omap_hwmod.h" |
| 31 | #include "soc.h" |
| 32 | #include "iomap.h" |
| 33 | #include "voltage.h" |
| 34 | #include "powerdomain.h" |
| 35 | #include "clockdomain.h" |
| 36 | #include "common.h" |
| 37 | #include "clock.h" |
| 38 | #include "clock2xxx.h" |
| 39 | #include "clock3xxx.h" |
| 40 | #include "sdrc.h" |
| 41 | #include "control.h" |
| 42 | #include "serial.h" |
| 43 | #include "sram.h" |
| 44 | #include "cm2xxx.h" |
| 45 | #include "cm3xxx.h" |
| 46 | #include "cm33xx.h" |
| 47 | #include "cm44xx.h" |
| 48 | #include "prm.h" |
| 49 | #include "cm.h" |
| 50 | #include "prcm_mpu44xx.h" |
| 51 | #include "prminst44xx.h" |
| 52 | #include "prm2xxx.h" |
| 53 | #include "prm3xxx.h" |
| 54 | #include "prm33xx.h" |
| 55 | #include "prm44xx.h" |
| 56 | #include "opp2xxx.h" |
| 57 | |
| 58 | /* |
| 59 | * omap_clk_soc_init: points to a function that does the SoC-specific |
| 60 | * clock initializations |
| 61 | */ |
| 62 | static int (*omap_clk_soc_init)(void); |
| 63 | |
| 64 | /* |
| 65 | * The machine specific code may provide the extra mapping besides the |
| 66 | * default mapping provided here. |
| 67 | */ |
| 68 | |
| 69 | #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) |
| 70 | static struct map_desc omap24xx_io_desc[] __initdata = { |
| 71 | { |
| 72 | .virtual = L3_24XX_VIRT, |
| 73 | .pfn = __phys_to_pfn(L3_24XX_PHYS), |
| 74 | .length = L3_24XX_SIZE, |
| 75 | .type = MT_DEVICE |
| 76 | }, |
| 77 | { |
| 78 | .virtual = L4_24XX_VIRT, |
| 79 | .pfn = __phys_to_pfn(L4_24XX_PHYS), |
| 80 | .length = L4_24XX_SIZE, |
| 81 | .type = MT_DEVICE |
| 82 | }, |
| 83 | }; |
| 84 | |
| 85 | #ifdef CONFIG_SOC_OMAP2420 |
| 86 | static struct map_desc omap242x_io_desc[] __initdata = { |
| 87 | { |
| 88 | .virtual = DSP_MEM_2420_VIRT, |
| 89 | .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS), |
| 90 | .length = DSP_MEM_2420_SIZE, |
| 91 | .type = MT_DEVICE |
| 92 | }, |
| 93 | { |
| 94 | .virtual = DSP_IPI_2420_VIRT, |
| 95 | .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS), |
| 96 | .length = DSP_IPI_2420_SIZE, |
| 97 | .type = MT_DEVICE |
| 98 | }, |
| 99 | { |
| 100 | .virtual = DSP_MMU_2420_VIRT, |
| 101 | .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS), |
| 102 | .length = DSP_MMU_2420_SIZE, |
| 103 | .type = MT_DEVICE |
| 104 | }, |
| 105 | }; |
| 106 | |
| 107 | #endif |
| 108 | |
| 109 | #ifdef CONFIG_SOC_OMAP2430 |
| 110 | static struct map_desc omap243x_io_desc[] __initdata = { |
| 111 | { |
| 112 | .virtual = L4_WK_243X_VIRT, |
| 113 | .pfn = __phys_to_pfn(L4_WK_243X_PHYS), |
| 114 | .length = L4_WK_243X_SIZE, |
| 115 | .type = MT_DEVICE |
| 116 | }, |
| 117 | { |
| 118 | .virtual = OMAP243X_GPMC_VIRT, |
| 119 | .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS), |
| 120 | .length = OMAP243X_GPMC_SIZE, |
| 121 | .type = MT_DEVICE |
| 122 | }, |
| 123 | { |
| 124 | .virtual = OMAP243X_SDRC_VIRT, |
| 125 | .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS), |
| 126 | .length = OMAP243X_SDRC_SIZE, |
| 127 | .type = MT_DEVICE |
| 128 | }, |
| 129 | { |
| 130 | .virtual = OMAP243X_SMS_VIRT, |
| 131 | .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS), |
| 132 | .length = OMAP243X_SMS_SIZE, |
| 133 | .type = MT_DEVICE |
| 134 | }, |
| 135 | }; |
| 136 | #endif |
| 137 | #endif |
| 138 | |
| 139 | #ifdef CONFIG_ARCH_OMAP3 |
| 140 | static struct map_desc omap34xx_io_desc[] __initdata = { |
| 141 | { |
| 142 | .virtual = L3_34XX_VIRT, |
| 143 | .pfn = __phys_to_pfn(L3_34XX_PHYS), |
| 144 | .length = L3_34XX_SIZE, |
| 145 | .type = MT_DEVICE |
| 146 | }, |
| 147 | { |
| 148 | .virtual = L4_34XX_VIRT, |
| 149 | .pfn = __phys_to_pfn(L4_34XX_PHYS), |
| 150 | .length = L4_34XX_SIZE, |
| 151 | .type = MT_DEVICE |
| 152 | }, |
| 153 | { |
| 154 | .virtual = OMAP34XX_GPMC_VIRT, |
| 155 | .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS), |
| 156 | .length = OMAP34XX_GPMC_SIZE, |
| 157 | .type = MT_DEVICE |
| 158 | }, |
| 159 | { |
| 160 | .virtual = OMAP343X_SMS_VIRT, |
| 161 | .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS), |
| 162 | .length = OMAP343X_SMS_SIZE, |
| 163 | .type = MT_DEVICE |
| 164 | }, |
| 165 | { |
| 166 | .virtual = OMAP343X_SDRC_VIRT, |
| 167 | .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS), |
| 168 | .length = OMAP343X_SDRC_SIZE, |
| 169 | .type = MT_DEVICE |
| 170 | }, |
| 171 | { |
| 172 | .virtual = L4_PER_34XX_VIRT, |
| 173 | .pfn = __phys_to_pfn(L4_PER_34XX_PHYS), |
| 174 | .length = L4_PER_34XX_SIZE, |
| 175 | .type = MT_DEVICE |
| 176 | }, |
| 177 | { |
| 178 | .virtual = L4_EMU_34XX_VIRT, |
| 179 | .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS), |
| 180 | .length = L4_EMU_34XX_SIZE, |
| 181 | .type = MT_DEVICE |
| 182 | }, |
| 183 | }; |
| 184 | #endif |
| 185 | |
| 186 | #ifdef CONFIG_SOC_TI81XX |
| 187 | static struct map_desc omapti81xx_io_desc[] __initdata = { |
| 188 | { |
| 189 | .virtual = L4_34XX_VIRT, |
| 190 | .pfn = __phys_to_pfn(L4_34XX_PHYS), |
| 191 | .length = L4_34XX_SIZE, |
| 192 | .type = MT_DEVICE |
| 193 | } |
| 194 | }; |
| 195 | #endif |
| 196 | |
| 197 | #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) |
| 198 | static struct map_desc omapam33xx_io_desc[] __initdata = { |
| 199 | { |
| 200 | .virtual = L4_34XX_VIRT, |
| 201 | .pfn = __phys_to_pfn(L4_34XX_PHYS), |
| 202 | .length = L4_34XX_SIZE, |
| 203 | .type = MT_DEVICE |
| 204 | }, |
| 205 | { |
| 206 | .virtual = L4_WK_AM33XX_VIRT, |
| 207 | .pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS), |
| 208 | .length = L4_WK_AM33XX_SIZE, |
| 209 | .type = MT_DEVICE |
| 210 | } |
| 211 | }; |
| 212 | #endif |
| 213 | |
| 214 | #ifdef CONFIG_ARCH_OMAP4 |
| 215 | static struct map_desc omap44xx_io_desc[] __initdata = { |
| 216 | { |
| 217 | .virtual = L3_44XX_VIRT, |
| 218 | .pfn = __phys_to_pfn(L3_44XX_PHYS), |
| 219 | .length = L3_44XX_SIZE, |
| 220 | .type = MT_DEVICE, |
| 221 | }, |
| 222 | { |
| 223 | .virtual = L4_44XX_VIRT, |
| 224 | .pfn = __phys_to_pfn(L4_44XX_PHYS), |
| 225 | .length = L4_44XX_SIZE, |
| 226 | .type = MT_DEVICE, |
| 227 | }, |
| 228 | { |
| 229 | .virtual = L4_PER_44XX_VIRT, |
| 230 | .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), |
| 231 | .length = L4_PER_44XX_SIZE, |
| 232 | .type = MT_DEVICE, |
| 233 | }, |
| 234 | }; |
| 235 | #endif |
| 236 | |
| 237 | #ifdef CONFIG_SOC_OMAP5 |
| 238 | static struct map_desc omap54xx_io_desc[] __initdata = { |
| 239 | { |
| 240 | .virtual = L3_54XX_VIRT, |
| 241 | .pfn = __phys_to_pfn(L3_54XX_PHYS), |
| 242 | .length = L3_54XX_SIZE, |
| 243 | .type = MT_DEVICE, |
| 244 | }, |
| 245 | { |
| 246 | .virtual = L4_54XX_VIRT, |
| 247 | .pfn = __phys_to_pfn(L4_54XX_PHYS), |
| 248 | .length = L4_54XX_SIZE, |
| 249 | .type = MT_DEVICE, |
| 250 | }, |
| 251 | { |
| 252 | .virtual = L4_WK_54XX_VIRT, |
| 253 | .pfn = __phys_to_pfn(L4_WK_54XX_PHYS), |
| 254 | .length = L4_WK_54XX_SIZE, |
| 255 | .type = MT_DEVICE, |
| 256 | }, |
| 257 | { |
| 258 | .virtual = L4_PER_54XX_VIRT, |
| 259 | .pfn = __phys_to_pfn(L4_PER_54XX_PHYS), |
| 260 | .length = L4_PER_54XX_SIZE, |
| 261 | .type = MT_DEVICE, |
| 262 | }, |
| 263 | }; |
| 264 | #endif |
| 265 | |
| 266 | #ifdef CONFIG_SOC_DRA7XX |
| 267 | static struct map_desc dra7xx_io_desc[] __initdata = { |
| 268 | { |
| 269 | .virtual = L4_CFG_MPU_DRA7XX_VIRT, |
| 270 | .pfn = __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS), |
| 271 | .length = L4_CFG_MPU_DRA7XX_SIZE, |
| 272 | .type = MT_DEVICE, |
| 273 | }, |
| 274 | { |
| 275 | .virtual = L3_MAIN_SN_DRA7XX_VIRT, |
| 276 | .pfn = __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS), |
| 277 | .length = L3_MAIN_SN_DRA7XX_SIZE, |
| 278 | .type = MT_DEVICE, |
| 279 | }, |
| 280 | { |
| 281 | .virtual = L4_PER1_DRA7XX_VIRT, |
| 282 | .pfn = __phys_to_pfn(L4_PER1_DRA7XX_PHYS), |
| 283 | .length = L4_PER1_DRA7XX_SIZE, |
| 284 | .type = MT_DEVICE, |
| 285 | }, |
| 286 | { |
| 287 | .virtual = L4_PER2_DRA7XX_VIRT, |
| 288 | .pfn = __phys_to_pfn(L4_PER2_DRA7XX_PHYS), |
| 289 | .length = L4_PER2_DRA7XX_SIZE, |
| 290 | .type = MT_DEVICE, |
| 291 | }, |
| 292 | { |
| 293 | .virtual = L4_PER3_DRA7XX_VIRT, |
| 294 | .pfn = __phys_to_pfn(L4_PER3_DRA7XX_PHYS), |
| 295 | .length = L4_PER3_DRA7XX_SIZE, |
| 296 | .type = MT_DEVICE, |
| 297 | }, |
| 298 | { |
| 299 | .virtual = L4_CFG_DRA7XX_VIRT, |
| 300 | .pfn = __phys_to_pfn(L4_CFG_DRA7XX_PHYS), |
| 301 | .length = L4_CFG_DRA7XX_SIZE, |
| 302 | .type = MT_DEVICE, |
| 303 | }, |
| 304 | { |
| 305 | .virtual = L4_WKUP_DRA7XX_VIRT, |
| 306 | .pfn = __phys_to_pfn(L4_WKUP_DRA7XX_PHYS), |
| 307 | .length = L4_WKUP_DRA7XX_SIZE, |
| 308 | .type = MT_DEVICE, |
| 309 | }, |
| 310 | }; |
| 311 | #endif |
| 312 | |
| 313 | #ifdef CONFIG_SOC_OMAP2420 |
| 314 | void __init omap242x_map_io(void) |
| 315 | { |
| 316 | iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); |
| 317 | iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); |
| 318 | } |
| 319 | #endif |
| 320 | |
| 321 | #ifdef CONFIG_SOC_OMAP2430 |
| 322 | void __init omap243x_map_io(void) |
| 323 | { |
| 324 | iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); |
| 325 | iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); |
| 326 | } |
| 327 | #endif |
| 328 | |
| 329 | #ifdef CONFIG_ARCH_OMAP3 |
| 330 | void __init omap3_map_io(void) |
| 331 | { |
| 332 | iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); |
| 333 | } |
| 334 | #endif |
| 335 | |
| 336 | #ifdef CONFIG_SOC_TI81XX |
| 337 | void __init ti81xx_map_io(void) |
| 338 | { |
| 339 | iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); |
| 340 | } |
| 341 | #endif |
| 342 | |
| 343 | #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) |
| 344 | void __init am33xx_map_io(void) |
| 345 | { |
| 346 | iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); |
| 347 | } |
| 348 | #endif |
| 349 | |
| 350 | #ifdef CONFIG_ARCH_OMAP4 |
| 351 | void __init omap4_map_io(void) |
| 352 | { |
| 353 | iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); |
| 354 | omap_barriers_init(); |
| 355 | } |
| 356 | #endif |
| 357 | |
| 358 | #ifdef CONFIG_SOC_OMAP5 |
| 359 | void __init omap5_map_io(void) |
| 360 | { |
| 361 | iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); |
| 362 | omap_barriers_init(); |
| 363 | } |
| 364 | #endif |
| 365 | |
| 366 | #ifdef CONFIG_SOC_DRA7XX |
| 367 | void __init dra7xx_map_io(void) |
| 368 | { |
| 369 | iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); |
| 370 | omap_barriers_init(); |
| 371 | } |
| 372 | #endif |
| 373 | /* |
| 374 | * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters |
| 375 | * |
| 376 | * Sets the CORE DPLL3 M2 divider to the same value that it's at |
| 377 | * currently. This has the effect of setting the SDRC SDRAM AC timing |
| 378 | * registers to the values currently defined by the kernel. Currently |
| 379 | * only defined for OMAP3; will return 0 if called on OMAP2. Returns |
| 380 | * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2, |
| 381 | * or passes along the return value of clk_set_rate(). |
| 382 | */ |
| 383 | static int __init _omap2_init_reprogram_sdrc(void) |
| 384 | { |
| 385 | struct clk *dpll3_m2_ck; |
| 386 | int v = -EINVAL; |
| 387 | long rate; |
| 388 | |
| 389 | if (!cpu_is_omap34xx()) |
| 390 | return 0; |
| 391 | |
| 392 | dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); |
| 393 | if (IS_ERR(dpll3_m2_ck)) |
| 394 | return -EINVAL; |
| 395 | |
| 396 | rate = clk_get_rate(dpll3_m2_ck); |
| 397 | pr_info("Reprogramming SDRC clock to %ld Hz\n", rate); |
| 398 | v = clk_set_rate(dpll3_m2_ck, rate); |
| 399 | if (v) |
| 400 | pr_err("dpll3_m2_clk rate change failed: %d\n", v); |
| 401 | |
| 402 | clk_put(dpll3_m2_ck); |
| 403 | |
| 404 | return v; |
| 405 | } |
| 406 | |
| 407 | static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) |
| 408 | { |
| 409 | return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); |
| 410 | } |
| 411 | |
| 412 | static void __init __maybe_unused omap_hwmod_init_postsetup(void) |
| 413 | { |
| 414 | u8 postsetup_state; |
| 415 | |
| 416 | /* Set the default postsetup state for all hwmods */ |
| 417 | #ifdef CONFIG_PM |
| 418 | postsetup_state = _HWMOD_STATE_IDLE; |
| 419 | #else |
| 420 | postsetup_state = _HWMOD_STATE_ENABLED; |
| 421 | #endif |
| 422 | omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); |
| 423 | } |
| 424 | |
| 425 | #ifdef CONFIG_SOC_OMAP2420 |
| 426 | void __init omap2420_init_early(void) |
| 427 | { |
| 428 | omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); |
| 429 | omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), |
| 430 | OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); |
| 431 | omap2_control_base_init(); |
| 432 | omap2xxx_check_revision(); |
| 433 | omap2_prcm_base_init(); |
| 434 | omap2xxx_voltagedomains_init(); |
| 435 | omap242x_powerdomains_init(); |
| 436 | omap242x_clockdomains_init(); |
| 437 | omap2420_hwmod_init(); |
| 438 | omap_hwmod_init_postsetup(); |
| 439 | omap_clk_soc_init = omap2420_dt_clk_init; |
| 440 | rate_table = omap2420_rate_table; |
| 441 | } |
| 442 | |
| 443 | void __init omap2420_init_late(void) |
| 444 | { |
| 445 | omap_pm_soc_init = omap2_pm_init; |
| 446 | } |
| 447 | #endif |
| 448 | |
| 449 | #ifdef CONFIG_SOC_OMAP2430 |
| 450 | void __init omap2430_init_early(void) |
| 451 | { |
| 452 | omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); |
| 453 | omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), |
| 454 | OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); |
| 455 | omap2_control_base_init(); |
| 456 | omap2xxx_check_revision(); |
| 457 | omap2_prcm_base_init(); |
| 458 | omap2xxx_voltagedomains_init(); |
| 459 | omap243x_powerdomains_init(); |
| 460 | omap243x_clockdomains_init(); |
| 461 | omap2430_hwmod_init(); |
| 462 | omap_hwmod_init_postsetup(); |
| 463 | omap_clk_soc_init = omap2430_dt_clk_init; |
| 464 | rate_table = omap2430_rate_table; |
| 465 | } |
| 466 | |
| 467 | void __init omap2430_init_late(void) |
| 468 | { |
| 469 | omap_pm_soc_init = omap2_pm_init; |
| 470 | } |
| 471 | #endif |
| 472 | |
| 473 | /* |
| 474 | * Currently only board-omap3beagle.c should call this because of the |
| 475 | * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. |
| 476 | */ |
| 477 | #ifdef CONFIG_ARCH_OMAP3 |
| 478 | void __init omap3_init_early(void) |
| 479 | { |
| 480 | omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); |
| 481 | omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), |
| 482 | OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); |
| 483 | omap2_control_base_init(); |
| 484 | omap3xxx_check_revision(); |
| 485 | omap3xxx_check_features(); |
| 486 | omap2_prcm_base_init(); |
| 487 | omap3xxx_voltagedomains_init(); |
| 488 | omap3xxx_powerdomains_init(); |
| 489 | omap3xxx_clockdomains_init(); |
| 490 | omap3xxx_hwmod_init(); |
| 491 | omap_hwmod_init_postsetup(); |
| 492 | } |
| 493 | |
| 494 | void __init omap3430_init_early(void) |
| 495 | { |
| 496 | omap3_init_early(); |
| 497 | omap_clk_soc_init = omap3430_dt_clk_init; |
| 498 | } |
| 499 | |
| 500 | void __init omap35xx_init_early(void) |
| 501 | { |
| 502 | omap3_init_early(); |
| 503 | omap_clk_soc_init = omap3430_dt_clk_init; |
| 504 | } |
| 505 | |
| 506 | void __init omap3630_init_early(void) |
| 507 | { |
| 508 | omap3_init_early(); |
| 509 | omap_clk_soc_init = omap3630_dt_clk_init; |
| 510 | } |
| 511 | |
| 512 | void __init am35xx_init_early(void) |
| 513 | { |
| 514 | omap3_init_early(); |
| 515 | omap_clk_soc_init = am35xx_dt_clk_init; |
| 516 | } |
| 517 | |
| 518 | void __init omap3_init_late(void) |
| 519 | { |
| 520 | omap_pm_soc_init = omap3_pm_init; |
| 521 | } |
| 522 | |
| 523 | void __init ti81xx_init_late(void) |
| 524 | { |
| 525 | omap_pm_soc_init = omap_pm_nop_init; |
| 526 | } |
| 527 | #endif |
| 528 | |
| 529 | #ifdef CONFIG_SOC_TI81XX |
| 530 | void __init ti814x_init_early(void) |
| 531 | { |
| 532 | omap2_set_globals_tap(TI814X_CLASS, |
| 533 | OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); |
| 534 | omap2_control_base_init(); |
| 535 | omap3xxx_check_revision(); |
| 536 | ti81xx_check_features(); |
| 537 | omap2_prcm_base_init(); |
| 538 | omap3xxx_voltagedomains_init(); |
| 539 | omap3xxx_powerdomains_init(); |
| 540 | ti814x_clockdomains_init(); |
| 541 | dm814x_hwmod_init(); |
| 542 | omap_hwmod_init_postsetup(); |
| 543 | omap_clk_soc_init = dm814x_dt_clk_init; |
| 544 | } |
| 545 | |
| 546 | void __init ti816x_init_early(void) |
| 547 | { |
| 548 | omap2_set_globals_tap(TI816X_CLASS, |
| 549 | OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); |
| 550 | omap2_control_base_init(); |
| 551 | omap3xxx_check_revision(); |
| 552 | ti81xx_check_features(); |
| 553 | omap2_prcm_base_init(); |
| 554 | omap3xxx_voltagedomains_init(); |
| 555 | omap3xxx_powerdomains_init(); |
| 556 | ti816x_clockdomains_init(); |
| 557 | dm816x_hwmod_init(); |
| 558 | omap_hwmod_init_postsetup(); |
| 559 | omap_clk_soc_init = dm816x_dt_clk_init; |
| 560 | } |
| 561 | #endif |
| 562 | |
| 563 | #ifdef CONFIG_SOC_AM33XX |
| 564 | void __init am33xx_init_early(void) |
| 565 | { |
| 566 | omap2_set_globals_tap(AM335X_CLASS, |
| 567 | AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); |
| 568 | omap2_control_base_init(); |
| 569 | omap3xxx_check_revision(); |
| 570 | am33xx_check_features(); |
| 571 | omap2_prcm_base_init(); |
| 572 | am33xx_powerdomains_init(); |
| 573 | am33xx_clockdomains_init(); |
| 574 | am33xx_hwmod_init(); |
| 575 | omap_hwmod_init_postsetup(); |
| 576 | omap_clk_soc_init = am33xx_dt_clk_init; |
| 577 | } |
| 578 | |
| 579 | void __init am33xx_init_late(void) |
| 580 | { |
| 581 | omap_pm_soc_init = amx3_common_pm_init; |
| 582 | } |
| 583 | #endif |
| 584 | |
| 585 | #ifdef CONFIG_SOC_AM43XX |
| 586 | void __init am43xx_init_early(void) |
| 587 | { |
| 588 | omap2_set_globals_tap(AM335X_CLASS, |
| 589 | AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); |
| 590 | omap2_control_base_init(); |
| 591 | omap3xxx_check_revision(); |
| 592 | am33xx_check_features(); |
| 593 | omap2_prcm_base_init(); |
| 594 | am43xx_powerdomains_init(); |
| 595 | am43xx_clockdomains_init(); |
| 596 | am43xx_hwmod_init(); |
| 597 | omap_hwmod_init_postsetup(); |
| 598 | omap_l2_cache_init(); |
| 599 | omap_clk_soc_init = am43xx_dt_clk_init; |
| 600 | } |
| 601 | |
| 602 | void __init am43xx_init_late(void) |
| 603 | { |
| 604 | omap_pm_soc_init = amx3_common_pm_init; |
| 605 | } |
| 606 | #endif |
| 607 | |
| 608 | #ifdef CONFIG_ARCH_OMAP4 |
| 609 | void __init omap4430_init_early(void) |
| 610 | { |
| 611 | omap2_set_globals_tap(OMAP443X_CLASS, |
| 612 | OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); |
| 613 | omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); |
| 614 | omap2_control_base_init(); |
| 615 | omap4xxx_check_revision(); |
| 616 | omap4xxx_check_features(); |
| 617 | omap2_prcm_base_init(); |
| 618 | omap4_sar_ram_init(); |
| 619 | omap4_mpuss_early_init(); |
| 620 | omap4_pm_init_early(); |
| 621 | omap44xx_voltagedomains_init(); |
| 622 | omap44xx_powerdomains_init(); |
| 623 | omap44xx_clockdomains_init(); |
| 624 | omap44xx_hwmod_init(); |
| 625 | omap_hwmod_init_postsetup(); |
| 626 | omap_l2_cache_init(); |
| 627 | omap_clk_soc_init = omap4xxx_dt_clk_init; |
| 628 | } |
| 629 | |
| 630 | void __init omap4430_init_late(void) |
| 631 | { |
| 632 | omap_pm_soc_init = omap4_pm_init; |
| 633 | } |
| 634 | #endif |
| 635 | |
| 636 | #ifdef CONFIG_SOC_OMAP5 |
| 637 | void __init omap5_init_early(void) |
| 638 | { |
| 639 | omap2_set_globals_tap(OMAP54XX_CLASS, |
| 640 | OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); |
| 641 | omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); |
| 642 | omap2_control_base_init(); |
| 643 | omap2_prcm_base_init(); |
| 644 | omap5xxx_check_revision(); |
| 645 | omap4_sar_ram_init(); |
| 646 | omap4_mpuss_early_init(); |
| 647 | omap4_pm_init_early(); |
| 648 | omap54xx_voltagedomains_init(); |
| 649 | omap54xx_powerdomains_init(); |
| 650 | omap54xx_clockdomains_init(); |
| 651 | omap54xx_hwmod_init(); |
| 652 | omap_hwmod_init_postsetup(); |
| 653 | omap_clk_soc_init = omap5xxx_dt_clk_init; |
| 654 | } |
| 655 | |
| 656 | void __init omap5_init_late(void) |
| 657 | { |
| 658 | omap_pm_soc_init = omap4_pm_init; |
| 659 | } |
| 660 | #endif |
| 661 | |
| 662 | #ifdef CONFIG_SOC_DRA7XX |
| 663 | void __init dra7xx_init_early(void) |
| 664 | { |
| 665 | omap2_set_globals_tap(DRA7XX_CLASS, |
| 666 | OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); |
| 667 | omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); |
| 668 | omap2_control_base_init(); |
| 669 | omap4_pm_init_early(); |
| 670 | omap2_prcm_base_init(); |
| 671 | dra7xxx_check_revision(); |
| 672 | dra7xx_powerdomains_init(); |
| 673 | dra7xx_clockdomains_init(); |
| 674 | dra7xx_hwmod_init(); |
| 675 | omap_hwmod_init_postsetup(); |
| 676 | omap_clk_soc_init = dra7xx_dt_clk_init; |
| 677 | } |
| 678 | |
| 679 | void __init dra7xx_init_late(void) |
| 680 | { |
| 681 | omap_pm_soc_init = omap4_pm_init; |
| 682 | } |
| 683 | #endif |
| 684 | |
| 685 | |
| 686 | void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, |
| 687 | struct omap_sdrc_params *sdrc_cs1) |
| 688 | { |
| 689 | omap_sram_init(); |
| 690 | |
| 691 | if (cpu_is_omap24xx() || omap3_has_sdrc()) { |
| 692 | omap2_sdrc_init(sdrc_cs0, sdrc_cs1); |
| 693 | _omap2_init_reprogram_sdrc(); |
| 694 | } |
| 695 | } |
| 696 | |
| 697 | int __init omap_clk_init(void) |
| 698 | { |
| 699 | int ret = 0; |
| 700 | |
| 701 | if (!omap_clk_soc_init) |
| 702 | return 0; |
| 703 | |
| 704 | ti_clk_init_features(); |
| 705 | |
| 706 | omap2_clk_setup_ll_ops(); |
| 707 | |
| 708 | ret = omap_control_init(); |
| 709 | if (ret) |
| 710 | return ret; |
| 711 | |
| 712 | ret = omap_prcm_init(); |
| 713 | if (ret) |
| 714 | return ret; |
| 715 | |
| 716 | of_clk_init(NULL); |
| 717 | |
| 718 | ti_dt_clk_init_retry_clks(); |
| 719 | |
| 720 | ti_dt_clockdomains_setup(); |
| 721 | |
| 722 | ret = omap_clk_soc_init(); |
| 723 | |
| 724 | return ret; |
| 725 | } |