diff --git a/tools/gpio/lsgpio.c b/tools/gpio/lsgpio.c
new file mode 100644
index 0000000..eb3f56e
--- /dev/null
+++ b/tools/gpio/lsgpio.c
@@ -0,0 +1,195 @@
+/*
+ * lsgpio - example on how to list the GPIO lines on a system
+ *
+ * Copyright (C) 2015 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Usage:
+ *	lsgpio <-n device-name>
+ */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <dirent.h>
+#include <errno.h>
+#include <string.h>
+#include <poll.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <sys/ioctl.h>
+#include <linux/gpio.h>
+
+#include "gpio-utils.h"
+
+struct gpio_flag {
+	char *name;
+	unsigned long mask;
+};
+
+struct gpio_flag flagnames[] = {
+	{
+		.name = "kernel",
+		.mask = GPIOLINE_FLAG_KERNEL,
+	},
+	{
+		.name = "output",
+		.mask = GPIOLINE_FLAG_IS_OUT,
+	},
+	{
+		.name = "active-low",
+		.mask = GPIOLINE_FLAG_ACTIVE_LOW,
+	},
+	{
+		.name = "open-drain",
+		.mask = GPIOLINE_FLAG_OPEN_DRAIN,
+	},
+	{
+		.name = "open-source",
+		.mask = GPIOLINE_FLAG_OPEN_SOURCE,
+	},
+};
+
+void print_flags(unsigned long flags)
+{
+	int i;
+	int printed = 0;
+
+	for (i = 0; i < ARRAY_SIZE(flagnames); i++) {
+		if (flags & flagnames[i].mask) {
+			if (printed)
+				fprintf(stdout, " ");
+			fprintf(stdout, "%s", flagnames[i].name);
+			printed++;
+		}
+	}
+}
+
+int list_device(const char *device_name)
+{
+	struct gpiochip_info cinfo;
+	char *chrdev_name;
+	int fd;
+	int ret;
+	int i;
+
+	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+	if (ret < 0)
+		return -ENOMEM;
+
+	fd = open(chrdev_name, 0);
+	if (fd == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to open %s\n", chrdev_name);
+		goto exit_close_error;
+	}
+
+	/* Inspect this GPIO chip */
+	ret = ioctl(fd, GPIO_GET_CHIPINFO_IOCTL, &cinfo);
+	if (ret == -1) {
+		ret = -errno;
+		perror("Failed to issue CHIPINFO IOCTL\n");
+		goto exit_close_error;
+	}
+	fprintf(stdout, "GPIO chip: %s, \"%s\", %u GPIO lines\n",
+		cinfo.name, cinfo.label, cinfo.lines);
+
+	/* Loop over the lines and print info */
+	for (i = 0; i < cinfo.lines; i++) {
+		struct gpioline_info linfo;
+
+		memset(&linfo, 0, sizeof(linfo));
+		linfo.line_offset = i;
+
+		ret = ioctl(fd, GPIO_GET_LINEINFO_IOCTL, &linfo);
+		if (ret == -1) {
+			ret = -errno;
+			perror("Failed to issue LINEINFO IOCTL\n");
+			goto exit_close_error;
+		}
+		fprintf(stdout, "\tline %2d:", linfo.line_offset);
+		if (linfo.name[0])
+			fprintf(stdout, " \"%s\"", linfo.name);
+		else
+			fprintf(stdout, " unnamed");
+		if (linfo.consumer[0])
+			fprintf(stdout, " \"%s\"", linfo.consumer);
+		else
+			fprintf(stdout, " unused");
+		if (linfo.flags) {
+			fprintf(stdout, " [");
+			print_flags(linfo.flags);
+			fprintf(stdout, "]");
+		}
+		fprintf(stdout, "\n");
+
+	}
+
+exit_close_error:
+	if (close(fd) == -1)
+		perror("Failed to close GPIO character device file");
+	free(chrdev_name);
+	return ret;
+}
+
+void print_usage(void)
+{
+	fprintf(stderr, "Usage: lsgpio [options]...\n"
+		"List GPIO chips, lines and states\n"
+		"  -n <name>  List GPIOs on a named device\n"
+		"  -?         This helptext\n"
+	);
+}
+
+int main(int argc, char **argv)
+{
+	const char *device_name = NULL;
+	int ret;
+	int c;
+
+	while ((c = getopt(argc, argv, "n:")) != -1) {
+		switch (c) {
+		case 'n':
+			device_name = optarg;
+			break;
+		case '?':
+			print_usage();
+			return -1;
+		}
+	}
+
+	if (device_name)
+		ret = list_device(device_name);
+	else {
+		const struct dirent *ent;
+		DIR *dp;
+
+		/* List all GPIO devices one at a time */
+		dp = opendir("/dev");
+		if (!dp) {
+			ret = -errno;
+			goto error_out;
+		}
+
+		ret = -ENOENT;
+		while (ent = readdir(dp), ent) {
+			if (check_prefix(ent->d_name, "gpiochip")) {
+				ret = list_device(ent->d_name);
+				if (ret)
+					break;
+			}
+		}
+
+		ret = 0;
+		if (closedir(dp) == -1) {
+			perror("scanning devices: Failed to close directory");
+			ret = -errno;
+		}
+	}
+error_out:
+	return ret;
+}