v4.19.13 snapshot.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
new file mode 100644
index 0000000..4105d9f
--- /dev/null
+++ b/sound/pci/Kconfig
@@ -0,0 +1,912 @@
+# ALSA PCI drivers
+
+menuconfig SND_PCI
+ bool "PCI sound devices"
+ depends on PCI
+ default y
+ help
+ Support for sound devices connected via the PCI bus.
+
+if SND_PCI
+
+config SND_AD1889
+ tristate "Analog Devices AD1889"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device found in particular on the Hewlett-Packard [BCJ]-xxx0
+ class PA-RISC workstations, using the AD1819 codec.
+
+ To compile this as a module, choose M here: the module
+ will be called snd-ad1889.
+
+config SND_ALS300
+ tristate "Avance Logic ALS300/ALS300+"
+ select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ depends on ZONE_DMA
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
+
+config SND_ALS4000
+ tristate "Avance Logic ALS4000"
+ depends on ISA_DMA_API
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_PCM
+ select SND_SB_COMMON
+ help
+ Say Y here to include support for soundcards based on Avance Logic
+ ALS4000 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als4000.
+
+config SND_ALI5451
+ tristate "ALi M5451 PCI Audio Controller"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device on motherboards using the ALi M5451 Audio Controller
+ (M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets
+ use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ali5451.
+
+config SND_ASIHPI
+ tristate "AudioScience ASIxxxx"
+ depends on X86
+ select FW_LOADER
+ select SND_PCM
+ select SND_HWDEP
+ help
+ Say Y here to include support for AudioScience ASI sound cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-asihpi.
+
+config SND_ATIIXP
+ tristate "ATI IXP AC97 Controller"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device on motherboards with ATI chipsets (ATI IXP 150/200/250/
+ 300/400).
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-atiixp.
+
+config SND_ATIIXP_MODEM
+ tristate "ATI IXP Modem"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated MC97 modem on
+ motherboards with ATI chipsets (ATI IXP 150/200/250).
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-atiixp-modem.
+
+config SND_AU8810
+ tristate "Aureal Advantage"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for Aureal Advantage soundcards.
+
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-au8810.
+
+config SND_AU8820
+ tristate "Aureal Vortex"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for Aureal Vortex soundcards.
+
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-au8820.
+
+config SND_AU8830
+ tristate "Aureal Vortex 2"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for Aureal Vortex 2 soundcards.
+
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-au8830.
+
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
+config SND_AZT3328
+ tristate "Aztech AZF3328 / PCI168"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_PCM
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ select SND_TIMER
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for Aztech AZF3328 (PCI168)
+ soundcards.
+
+ Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O
+ (16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing),
+ Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer,
+ ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-azt3328.
+
+config SND_BT87X
+ tristate "Bt87x Audio Capture"
+ select SND_PCM
+ help
+ If you want to record audio from TV cards based on
+ Brooktree Bt878/Bt879 chips, say Y here and read
+ <file:Documentation/sound/cards/bt87x.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-bt87x.
+
+config SND_BT87X_OVERCLOCK
+ bool "Bt87x Audio overclocking"
+ depends on SND_BT87X
+ help
+ Say Y here if 448000 Hz isn't enough for you and you want to
+ record from the analog input with up to 1792000 Hz.
+
+ Higher sample rates won't hurt your hardware, but audio
+ quality may suffer.
+
+config SND_CA0106
+ tristate "SB Audigy LS / Live 24bit"
+ select SND_AC97_CODEC
+ select SND_RAWMIDI
+ select SND_VMASTER
+ help
+ Say Y here to include support for the Sound Blaster Audigy LS
+ and Live 24bit.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ca0106.
+
+config SND_CMIPCI
+ tristate "C-Media 8338, 8738, 8768, 8770"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_PCM
+ help
+ If you want to use soundcards based on C-Media CMI8338, CMI8738,
+ CMI8768 or CMI8770 chips, say Y here and read
+ <file:Documentation/sound/cards/cmipci.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cmipci.
+
+config SND_OXYGEN_LIB
+ tristate
+
+config SND_OXYGEN
+ tristate "C-Media 8786, 8787, 8788 (Oxygen)"
+ select SND_OXYGEN_LIB
+ select SND_PCM
+ select SND_MPU401_UART
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * Asus Xonar DG/DGX
+ * AuzenTech X-Meridian
+ * AuzenTech X-Meridian 2G
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
+ * Kuroutoshikou CMI8787-HG2PCI
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+ * TempoTec/MediaTek HiFier Fantasia
+ * TempoTec/MediaTek HiFier Serenade
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
+config SND_CS4281
+ tristate "Cirrus Logic (Sound Fusion) CS4281"
+ select SND_OPL3_LIB
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for Cirrus Logic CS4281 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs4281.
+
+config SND_CS46XX
+ tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ select FW_LOADER
+ help
+ Say Y here to include support for Cirrus Logic CS4610/CS4612/
+ CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs46xx.
+
+config SND_CS46XX_NEW_DSP
+ bool "Cirrus Logic (Sound Fusion) New DSP support"
+ depends on SND_CS46XX
+ default y
+ help
+ Say Y here to use a new DSP image for SPDIF and dual codecs.
+
+ This works better than the old code, so say Y.
+
+config SND_CS5530
+ tristate "CS5530 Audio"
+ depends on ISA_DMA_API && (X86_32 || COMPILE_TEST)
+ select SND_SB16_DSP
+ help
+ Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs5530.
+
+config SND_CS5535AUDIO
+ tristate "CS5535/CS5536 Audio"
+ depends on X86_32 || MIPS || COMPILE_TEST
+ select SND_PCM
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for audio on CS5535 chips. It is
+ referred to as NS CS5535 IO or AMD CS5535 IO companion in
+ various literature. This driver also supports the CS5536 audio
+ device. However, for both chips, on certain boards, you may
+ need to use ac97_quirk=hp_only if your board has physically
+ mapped headphone out to master output. If that works for you,
+ send lspci -vvv output to the mailing list so that your board
+ can be identified in the quirks list.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs5535audio.
+
+config SND_CTXFI
+ tristate "Creative Sound Blaster X-Fi"
+ select SND_PCM
+ help
+ If you want to use soundcards based on Creative Sound Blastr X-Fi
+ boards with 20k1 or 20k2 chips, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ctxfi.
+
+config SND_DARLA20
+ tristate "(Echoaudio) Darla20"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla20
+
+config SND_GINA20
+ tristate "(Echoaudio) Gina20"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina20
+
+config SND_LAYLA20
+ tristate "(Echoaudio) Layla20"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla20
+
+config SND_DARLA24
+ tristate "(Echoaudio) Darla24"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla24
+
+config SND_GINA24
+ tristate "(Echoaudio) Gina24"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina24
+
+config SND_LAYLA24
+ tristate "(Echoaudio) Layla24"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla24
+
+config SND_MONA
+ tristate "(Echoaudio) Mona"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mona.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mona
+
+config SND_MIA
+ tristate "(Echoaudio) Mia"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mia
+
+config SND_ECHO3G
+ tristate "(Echoaudio) 3G cards"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-echo3g
+
+config SND_INDIGO
+ tristate "(Echoaudio) Indigo"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigo
+
+config SND_INDIGOIO
+ tristate "(Echoaudio) Indigo IO"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoio
+
+config SND_INDIGODJ
+ tristate "(Echoaudio) Indigo DJ"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodj
+
+config SND_INDIGOIOX
+ tristate "(Echoaudio) Indigo IOx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IOx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoiox
+
+config SND_INDIGODJX
+ tristate "(Echoaudio) Indigo DJx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodjx
+
+config SND_EMU10K1
+ tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
+ select FW_LOADER
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ select SND_TIMER
+ select SND_SEQ_DEVICE if SND_SEQUENCER != n
+ depends on ZONE_DMA
+ help
+ Say Y to include support for Sound Blaster PCI 512, Live!,
+ Audigy and E-mu APS (partially supported) soundcards.
+
+ The confusing multitude of mixer controls is documented in
+ <file:Documentation/sound/cards/sb-live-mixer.rst> and
+ <file:Documentation/sound/cards/audigy-mixer.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-emu10k1.
+
+# select SEQ stuff to min(SND_SEQUENCER,SND_XXX)
+config SND_EMU10K1_SEQ
+ def_tristate SND_SEQUENCER && SND_EMU10K1
+ select SND_SEQ_MIDI_EMUL
+ select SND_SEQ_VIRMIDI
+ select SND_SYNTH_EMUX
+
+config SND_EMU10K1X
+ tristate "Emu10k1X (Dell OEM Version)"
+ select SND_AC97_CODEC
+ select SND_RAWMIDI
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for the Dell OEM version of the
+ Sound Blaster Live!.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-emu10k1x.
+
+config SND_ENS1370
+ tristate "(Creative) Ensoniq AudioPCI 1370"
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ens1370.
+
+config SND_ENS1371
+ tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
+ Sound Blaster PCI 64 or 128 soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ens1371.
+
+config SND_ES1938
+ tristate "ESS ES1938/1946/1969 (Solo-1)"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on ESS Solo-1
+ (ES1938, ES1946, ES1969) chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-es1938.
+
+config SND_ES1968
+ tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on ESS Maestro
+ 1/2/2E chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-es1968.
+
+config SND_ES1968_INPUT
+ bool "Enable input device for es1968 volume buttons"
+ depends on SND_ES1968
+ depends on INPUT=y || INPUT=SND_ES1968
+ help
+ If you say Y here, you will get an input device which reports
+ keypresses for the volume buttons connected to the es1968 chip.
+ If you say N the buttons will directly control the master volume.
+ It is recommended to say Y.
+
+config SND_ES1968_RADIO
+ bool "Enable TEA5757 radio tuner support for es1968"
+ depends on SND_ES1968
+ depends on MEDIA_RADIO_SUPPORT
+ depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
+ select RADIO_ADAPTERS
+ select RADIO_TEA575X
+
+ help
+ Say Y here to include support for TEA5757 radio tuner integrated on
+ some MediaForte cards (e.g. SF64-PCE2).
+
+config SND_FM801
+ tristate "ForteMedia FM801"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for soundcards based on the ForteMedia
+ FM801 chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-fm801.
+
+config SND_FM801_TEA575X_BOOL
+ bool "ForteMedia FM801 + TEA5757 tuner"
+ depends on SND_FM801
+ depends on MEDIA_RADIO_SUPPORT
+ depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
+ select RADIO_ADAPTERS
+ select RADIO_TEA575X
+ help
+ Say Y here to include support for soundcards based on the ForteMedia
+ FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and
+ SF64-PCR) into the snd-fm801 driver.
+
+config SND_HDSP
+ tristate "RME Hammerfall DSP Audio"
+ select FW_LOADER
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall DSP Audio
+ soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hdsp.
+
+comment "Don't forget to add built-in firmwares for HDSP driver"
+ depends on SND_HDSP=y
+
+config SND_HDSPM
+ tristate "RME Hammerfall DSP MADI/RayDAT/AIO"
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall DSP MADI,
+ RayDAT and AIO soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hdspm.
+
+config SND_ICE1712
+ tristate "ICEnsemble ICE1712 (Envy24)"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ select BITREVERSE
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on the
+ ICE1712 (Envy24) chip.
+
+ Currently supported hardware is: M-Audio Delta 1010(LT),
+ DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
+ TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
+ Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
+ Lionstracs Mediastation, Terrasoniq TS 88.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ice1712.
+
+config SND_ICE1724
+ tristate "ICE/VT1724/1720 (Envy24HT/PT)"
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ select SND_VMASTER
+ help
+ Say Y here to include support for soundcards based on
+ ICE/VT1724/1720 (Envy24HT/PT) chips.
+
+ Currently supported hardware is: AMP AUDIO2000; M-Audio
+ Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
+ 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
+ AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
+ Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
+ 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
+ AV-710; Shuttle SN25P; Philips PSC724 Ultimate Edge.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ice1724.
+
+config SND_INTEL8X0
+ tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
+ ALi chipsets using the M5455 Audio Controller. (There is a
+ separate driver for ALi M5451 Audio Controllers.)
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-intel8x0.
+
+config SND_INTEL8X0M
+ tristate "Intel/SiS/nVidia/AMD MC97 Modem"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated MC97 modem on
+ motherboards with Intel/SiS/nVidia/AMD chipsets.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-intel8x0m.
+
+config SND_KORG1212
+ tristate "Korg 1212 IO"
+ select SND_PCM
+ help
+ Say Y here to include support for Korg 1212IO soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-korg1212.
+
+config SND_LOLA
+ tristate "Digigram Lola"
+ select SND_PCM
+ help
+ Say Y to include support for Digigram Lola boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-lola.
+
+config SND_LX6464ES
+ tristate "Digigram LX6464ES"
+ depends on HAS_IOPORT_MAP
+ select SND_PCM
+ help
+ Say Y here to include support for Digigram LX6464ES boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-lx6464es.
+
+
+config SND_MAESTRO3
+ tristate "ESS Allegro/Maestro3"
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on ESS Maestro 3
+ (Allegro) chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-maestro3.
+
+config SND_MAESTRO3_INPUT
+ bool "Enable input device for maestro3 volume buttons"
+ depends on SND_MAESTRO3
+ depends on INPUT=y || INPUT=SND_MAESTRO3
+ help
+ If you say Y here, you will get an input device which reports
+ keypresses for the volume buttons connected to the maestro3 chip.
+ If you say N the buttons will directly control the master volume.
+ It is recommended to say Y.
+
+config SND_MIXART
+ tristate "Digigram miXart"
+ select FW_LOADER
+ select SND_HWDEP
+ select SND_PCM
+ help
+ If you want to use Digigram miXart soundcards, say Y here and
+ read <file:Documentation/sound/cards/mixart.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mixart.
+
+config SND_NM256
+ tristate "NeoMagic NM256AV/ZX"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for NeoMagic NM256AV/ZX chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-nm256.
+
+config SND_PCXHR
+ tristate "Digigram PCXHR"
+ select FW_LOADER
+ select SND_PCM
+ select SND_HWDEP
+ help
+ Say Y here to include support for Digigram PCXHR boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-pcxhr.
+
+config SND_RIPTIDE
+ tristate "Conexant Riptide"
+ select FW_LOADER
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say 'Y' or 'M' to include support for Conexant Riptide chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-riptide
+
+config SND_RME32
+ tristate "RME Digi32, 32/8, 32 PRO"
+ select SND_PCM
+ help
+ Say Y to include support for RME Digi32, Digi32 PRO and
+ Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
+ devices.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme32.
+
+config SND_RME96
+ tristate "RME Digi96, 96/8, 96/8 PRO"
+ select SND_PCM
+ help
+ Say Y here to include support for RME Digi96, Digi96/8 and
+ Digi96/8 PRO/PAD/PST soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme96.
+
+config SND_RME9652
+ tristate "RME Digi9652 (Hammerfall)"
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall (RME
+ Digi9652/Digi9636) soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme9652.
+
+config SND_SE6X
+ tristate "Studio Evolution SE6X"
+ depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict
+ select SND_OXYGEN_LIB
+ select SND_PCM
+ select SND_MPU401_UART
+ help
+ Say Y or M here only if you actually have this sound card.
+
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on X86_32
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
+config SND_SONICVIBES
+ tristate "S3 SonicVibes"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on the S3
+ SonicVibes chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sonicvibes.
+
+config SND_TRIDENT
+ tristate "Trident 4D-Wave DX/NX; SiS 7018"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ depends on ZONE_DMA
+ help
+ Say Y here to include support for soundcards based on Trident
+ 4D-Wave DX/NX or SiS 7018 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-trident.
+
+config SND_VIA82XX
+ tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device on motherboards with VIA chipsets.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-via82xx.
+
+config SND_VIA82XX_MODEM
+ tristate "VIA 82C686A/B, 8233 based Modems"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated MC97 modem on
+ motherboards with VIA chipsets.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-via82xx-modem.
+
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 66/100/200 (Xonar)"
+ select SND_OXYGEN_LIB
+ select SND_PCM
+ select SND_MPU401_UART
+ select SND_JACK
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV66/AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, DS, DSX,
+ Essence ST (Deluxe), and Essence STX (II).
+ Support for the HDAV1.3 (Deluxe) and HDAV1.3 Slim is experimental;
+ for the Xense, missing.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
+config SND_VX222
+ tristate "Digigram VX222"
+ select SND_VX_LIB
+ help
+ Say Y here to include support for Digigram VX222 soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-vx222.
+
+config SND_YMFPCI
+ tristate "Yamaha YMF724/740/744/754"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ select SND_TIMER
+ help
+ Say Y here to include support for Yamaha PCI audio chips -
+ YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ymfpci.
+
+endif # SND_PCI
+
+source "sound/pci/hda/Kconfig"