v4.19.13 snapshot.
diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
new file mode 100644
index 0000000..774eb22
--- /dev/null
+++ b/sound/firewire/dice/dice.c
@@ -0,0 +1,416 @@
+/*
+ * TC Applied Technologies Digital Interface Communications Engine driver
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ * Licensed under the terms of the GNU General Public License, version 2.
+ */
+
+#include "dice.h"
+
+MODULE_DESCRIPTION("DICE driver");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL v2");
+
+#define OUI_WEISS		0x001c6a
+#define OUI_LOUD		0x000ff2
+#define OUI_FOCUSRITE		0x00130e
+#define OUI_TCELECTRONIC	0x000166
+#define OUI_ALESIS		0x000595
+#define OUI_MAUDIO		0x000d6c
+#define OUI_MYTEK		0x001ee8
+
+#define DICE_CATEGORY_ID	0x04
+#define WEISS_CATEGORY_ID	0x00
+#define LOUD_CATEGORY_ID	0x10
+
+#define MODEL_ALESIS_IO_BOTH	0x000001
+
+static int check_dice_category(struct fw_unit *unit)
+{
+	struct fw_device *device = fw_parent_device(unit);
+	struct fw_csr_iterator it;
+	int key, val, vendor = -1, model = -1;
+	unsigned int category;
+
+	/*
+	 * Check that GUID and unit directory are constructed according to DICE
+	 * rules, i.e., that the specifier ID is the GUID's OUI, and that the
+	 * GUID chip ID consists of the 8-bit category ID, the 10-bit product
+	 * ID, and a 22-bit serial number.
+	 */
+	fw_csr_iterator_init(&it, unit->directory);
+	while (fw_csr_iterator_next(&it, &key, &val)) {
+		switch (key) {
+		case CSR_SPECIFIER_ID:
+			vendor = val;
+			break;
+		case CSR_MODEL:
+			model = val;
+			break;
+		}
+	}
+
+	if (vendor == OUI_WEISS)
+		category = WEISS_CATEGORY_ID;
+	else if (vendor == OUI_LOUD)
+		category = LOUD_CATEGORY_ID;
+	else
+		category = DICE_CATEGORY_ID;
+	if (device->config_rom[3] != ((vendor << 8) | category) ||
+	    device->config_rom[4] >> 22 != model)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int check_clock_caps(struct snd_dice *dice)
+{
+	__be32 value;
+	int err;
+
+	/* some very old firmwares don't tell about their clock support */
+	if (dice->clock_caps > 0) {
+		err = snd_dice_transaction_read_global(dice,
+						GLOBAL_CLOCK_CAPABILITIES,
+						&value, 4);
+		if (err < 0)
+			return err;
+		dice->clock_caps = be32_to_cpu(value);
+	} else {
+		/* this should be supported by any device */
+		dice->clock_caps = CLOCK_CAP_RATE_44100 |
+				   CLOCK_CAP_RATE_48000 |
+				   CLOCK_CAP_SOURCE_ARX1 |
+				   CLOCK_CAP_SOURCE_INTERNAL;
+	}
+
+	return 0;
+}
+
+static void dice_card_strings(struct snd_dice *dice)
+{
+	struct snd_card *card = dice->card;
+	struct fw_device *dev = fw_parent_device(dice->unit);
+	char vendor[32], model[32];
+	unsigned int i;
+	int err;
+
+	strcpy(card->driver, "DICE");
+
+	strcpy(card->shortname, "DICE");
+	BUILD_BUG_ON(NICK_NAME_SIZE < sizeof(card->shortname));
+	err = snd_dice_transaction_read_global(dice, GLOBAL_NICK_NAME,
+					       card->shortname,
+					       sizeof(card->shortname));
+	if (err >= 0) {
+		/* DICE strings are returned in "always-wrong" endianness */
+		BUILD_BUG_ON(sizeof(card->shortname) % 4 != 0);
+		for (i = 0; i < sizeof(card->shortname); i += 4)
+			swab32s((u32 *)&card->shortname[i]);
+		card->shortname[sizeof(card->shortname) - 1] = '\0';
+	}
+
+	strcpy(vendor, "?");
+	fw_csr_string(dev->config_rom + 5, CSR_VENDOR, vendor, sizeof(vendor));
+	strcpy(model, "?");
+	fw_csr_string(dice->unit->directory, CSR_MODEL, model, sizeof(model));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s %s (serial %u) at %s, S%d",
+		 vendor, model, dev->config_rom[4] & 0x3fffff,
+		 dev_name(&dice->unit->device), 100 << dev->max_speed);
+
+	strcpy(card->mixername, "DICE");
+}
+
+static void dice_free(struct snd_dice *dice)
+{
+	snd_dice_stream_destroy_duplex(dice);
+	snd_dice_transaction_destroy(dice);
+	fw_unit_put(dice->unit);
+
+	mutex_destroy(&dice->mutex);
+	kfree(dice);
+}
+
+/*
+ * This module releases the FireWire unit data after all ALSA character devices
+ * are released by applications. This is for releasing stream data or finishing
+ * transactions safely. Thus at returning from .remove(), this module still keep
+ * references for the unit.
+ */
+static void dice_card_free(struct snd_card *card)
+{
+	dice_free(card->private_data);
+}
+
+static void do_registration(struct work_struct *work)
+{
+	struct snd_dice *dice = container_of(work, struct snd_dice, dwork.work);
+	int err;
+
+	if (dice->registered)
+		return;
+
+	err = snd_card_new(&dice->unit->device, -1, NULL, THIS_MODULE, 0,
+			   &dice->card);
+	if (err < 0)
+		return;
+
+	err = snd_dice_transaction_init(dice);
+	if (err < 0)
+		goto error;
+
+	err = check_clock_caps(dice);
+	if (err < 0)
+		goto error;
+
+	dice_card_strings(dice);
+
+	err = dice->detect_formats(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_stream_init_duplex(dice);
+	if (err < 0)
+		goto error;
+
+	snd_dice_create_proc(dice);
+
+	err = snd_dice_create_pcm(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_create_midi(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_create_hwdep(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_card_register(dice->card);
+	if (err < 0)
+		goto error;
+
+	/*
+	 * After registered, dice instance can be released corresponding to
+	 * releasing the sound card instance.
+	 */
+	dice->card->private_free = dice_card_free;
+	dice->card->private_data = dice;
+	dice->registered = true;
+
+	return;
+error:
+	snd_dice_stream_destroy_duplex(dice);
+	snd_dice_transaction_destroy(dice);
+	snd_dice_stream_destroy_duplex(dice);
+	snd_card_free(dice->card);
+	dev_info(&dice->unit->device,
+		 "Sound card registration failed: %d\n", err);
+}
+
+static int dice_probe(struct fw_unit *unit,
+		      const struct ieee1394_device_id *entry)
+{
+	struct snd_dice *dice;
+	int err;
+
+	if (!entry->driver_data) {
+		err = check_dice_category(unit);
+		if (err < 0)
+			return -ENODEV;
+	}
+
+	/* Allocate this independent of sound card instance. */
+	dice = kzalloc(sizeof(struct snd_dice), GFP_KERNEL);
+	if (dice == NULL)
+		return -ENOMEM;
+
+	dice->unit = fw_unit_get(unit);
+	dev_set_drvdata(&unit->device, dice);
+
+	if (!entry->driver_data) {
+		dice->detect_formats = snd_dice_stream_detect_current_formats;
+	} else {
+		dice->detect_formats =
+				(snd_dice_detect_formats_t)entry->driver_data;
+	}
+
+	spin_lock_init(&dice->lock);
+	mutex_init(&dice->mutex);
+	init_completion(&dice->clock_accepted);
+	init_waitqueue_head(&dice->hwdep_wait);
+
+	/* Allocate and register this sound card later. */
+	INIT_DEFERRABLE_WORK(&dice->dwork, do_registration);
+	snd_fw_schedule_registration(unit, &dice->dwork);
+
+	return 0;
+}
+
+static void dice_remove(struct fw_unit *unit)
+{
+	struct snd_dice *dice = dev_get_drvdata(&unit->device);
+
+	/*
+	 * Confirm to stop the work for registration before the sound card is
+	 * going to be released. The work is not scheduled again because bus
+	 * reset handler is not called anymore.
+	 */
+	cancel_delayed_work_sync(&dice->dwork);
+
+	if (dice->registered) {
+		/* No need to wait for releasing card object in this context. */
+		snd_card_free_when_closed(dice->card);
+	} else {
+		/* Don't forget this case. */
+		dice_free(dice);
+	}
+}
+
+static void dice_bus_reset(struct fw_unit *unit)
+{
+	struct snd_dice *dice = dev_get_drvdata(&unit->device);
+
+	/* Postpone a workqueue for deferred registration. */
+	if (!dice->registered)
+		snd_fw_schedule_registration(unit, &dice->dwork);
+
+	/* The handler address register becomes initialized. */
+	snd_dice_transaction_reinit(dice);
+
+	/*
+	 * After registration, userspace can start packet streaming, then this
+	 * code block works fine.
+	 */
+	if (dice->registered) {
+		mutex_lock(&dice->mutex);
+		snd_dice_stream_update_duplex(dice);
+		mutex_unlock(&dice->mutex);
+	}
+}
+
+#define DICE_INTERFACE	0x000001
+
+static const struct ieee1394_device_id dice_id_table[] = {
+	/* M-Audio Profire 2626 has a different value in version field. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MAUDIO,
+		.model_id	= 0x000010,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats,
+	},
+	/* M-Audio Profire 610 has a different value in version field. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MAUDIO,
+		.model_id	= 0x000011,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats,
+	},
+	/* TC Electronic Konnekt 24D. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000020,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Konnekt 8. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000021,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Studio Konnekt 48. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000022,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Konnekt Live. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000023,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Desktop Konnekt 6. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000024,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Impact Twin. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000027,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Digital Konnekt x32. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000030,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* Alesis iO14/iO26. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_ALESIS,
+		.model_id	= MODEL_ALESIS_IO_BOTH,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_alesis_formats,
+	},
+	/* Mytek Stereo 192 DSD-DAC. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MYTEK,
+		.model_id	= 0x000002,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats,
+	},
+	{
+		.match_flags = IEEE1394_MATCH_VERSION,
+		.version     = DICE_INTERFACE,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(ieee1394, dice_id_table);
+
+static struct fw_driver dice_driver = {
+	.driver   = {
+		.owner	= THIS_MODULE,
+		.name	= KBUILD_MODNAME,
+		.bus	= &fw_bus_type,
+	},
+	.probe    = dice_probe,
+	.update   = dice_bus_reset,
+	.remove   = dice_remove,
+	.id_table = dice_id_table,
+};
+
+static int __init alsa_dice_init(void)
+{
+	return driver_register(&dice_driver.driver);
+}
+
+static void __exit alsa_dice_exit(void)
+{
+	driver_unregister(&dice_driver.driver);
+}
+
+module_init(alsa_dice_init);
+module_exit(alsa_dice_exit);