v4.19.13 snapshot.
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
new file mode 100644
index 0000000..61e5966
--- /dev/null
+++ b/scripts/Makefile.lib
@@ -0,0 +1,421 @@
+# SPDX-License-Identifier: GPL-2.0
+# Backward compatibility
+asflags-y += $(EXTRA_AFLAGS)
+ccflags-y += $(EXTRA_CFLAGS)
+cppflags-y += $(EXTRA_CPPFLAGS)
+ldflags-y += $(EXTRA_LDFLAGS)
+
+# flags that take effect in current and sub directories
+KBUILD_AFLAGS += $(subdir-asflags-y)
+KBUILD_CFLAGS += $(subdir-ccflags-y)
+
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
+# When an object is listed to be built compiled-in and modular,
+# only build the compiled-in version
+obj-m := $(filter-out $(obj-y),$(obj-m))
+
+# Libraries are always collected in one lib file.
+# Filter out objects already built-in
+lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
+
+# Determine modorder.
+# Unfortunately, we don't have information about ordering between -y
+# and -m subdirs. Just put -y's first.
+modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
+
+# Handle objects in subdirs
+# ---------------------------------------------------------------------------
+# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.a
+# and add the directory to the list of dirs to descend into: $(subdir-y)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
+# and add the directory to the list of dirs to descend into: $(subdir-m)
+__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
+subdir-y += $(__subdir-y)
+__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
+subdir-m += $(__subdir-m)
+obj-y := $(patsubst %/, %/built-in.a, $(obj-y))
+obj-m := $(filter-out %/, $(obj-m))
+
+# Subdirectories we need to descend into
+subdir-ym := $(sort $(subdir-y) $(subdir-m))
+
+# if $(foo-objs), $(foo-y), or $(foo-m) exists, foo.o is a composite object
+multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
+multi-used := $(multi-used-y) $(multi-used-m)
+single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
+
+# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
+# tell kbuild to descend
+subdir-obj-y := $(filter %/built-in.a, $(obj-y))
+
+# Replace multi-part objects by their individual parts,
+# including built-in.a from subdirectories
+real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
+real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
+
+# DTB
+# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
+extra-y += $(dtb-y)
+extra-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
+
+# Add subdir path
+
+extra-y := $(addprefix $(obj)/,$(extra-y))
+always := $(addprefix $(obj)/,$(always))
+targets := $(addprefix $(obj)/,$(targets))
+modorder := $(addprefix $(obj)/,$(modorder))
+obj-m := $(addprefix $(obj)/,$(obj-m))
+lib-y := $(addprefix $(obj)/,$(lib-y))
+subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
+real-obj-y := $(addprefix $(obj)/,$(real-obj-y))
+real-obj-m := $(addprefix $(obj)/,$(real-obj-m))
+single-used-m := $(addprefix $(obj)/,$(single-used-m))
+multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
+subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
+
+# Finds the multi-part object the current object will be linked into.
+# If the object belongs to two or more multi-part objects, all of them are
+# concatenated with a colon separator.
+modname-multi = $(subst $(space),:,$(sort $(foreach m,$(multi-used),\
+ $(if $(filter $*.o, $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$(m:.o=)))))
+
+modname = $(if $(modname-multi),$(modname-multi),$(basetarget))
+
+# These flags are needed for modversions and compiling, so we define them here
+# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
+# end up in (or would, if it gets compiled in)
+name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname))
+
+orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
+ $(ccflags-y) $(CFLAGS_$(basetarget).o)
+_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
+orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
+ $(asflags-y) $(AFLAGS_$(basetarget).o)
+_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
+_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
+
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+ $(CFLAGS_GCOV))
+endif
+
+#
+# Enable address sanitizer flags for kernel except some files or directories
+# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
+#
+ifeq ($(CONFIG_KASAN),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
+ $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
+endif
+
+ifeq ($(CONFIG_UBSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
+ $(CFLAGS_UBSAN))
+endif
+
+ifeq ($(CONFIG_KCOV),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
+ $(CFLAGS_KCOV))
+endif
+
+# If building the kernel in a separate objtree expand all occurrences
+# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
+
+ifeq ($(KBUILD_SRC),)
+__c_flags = $(_c_flags)
+__a_flags = $(_a_flags)
+__cpp_flags = $(_cpp_flags)
+else
+
+# -I$(obj) locates generated .h files
+# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
+# and locates generated .h files
+# FIXME: Replace both with specific CFLAGS* statements in the makefiles
+__c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
+ $(call flags,_c_flags)
+__a_flags = $(call flags,_a_flags)
+__cpp_flags = $(call flags,_cpp_flags)
+endif
+
+c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
+ -include $(srctree)/include/linux/compiler_types.h \
+ $(__c_flags) $(modkern_cflags) \
+ $(basename_flags) $(modname_flags)
+
+a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
+ $(__a_flags) $(modkern_aflags)
+
+cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
+ $(__cpp_flags)
+
+ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
+
+DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
+
+dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
+ $(addprefix -I,$(DTC_INCLUDE)) \
+ -undef -D__DTS__
+
+# Useful for describing the dependency of composite objects
+# Usage:
+# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+ $(eval $(obj)/$m: \
+ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
+# LEX
+# ---------------------------------------------------------------------------
+quiet_cmd_flex = LEX $@
+ cmd_flex = $(LEX) -o$@ -L $<
+
+$(obj)/%.lex.c: $(src)/%.l FORCE
+ $(call if_changed,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+quiet_cmd_bison = YACC $@
+ cmd_bison = $(YACC) -o$@ -t -l $<
+
+$(obj)/%.tab.c: $(src)/%.y FORCE
+ $(call if_changed,bison)
+
+quiet_cmd_bison_h = YACC $@
+ cmd_bison_h = $(YACC) -o/dev/null --defines=$@ -t -l $<
+
+$(obj)/%.tab.h: $(src)/%.y FORCE
+ $(call if_changed,bison_h)
+
+# Shipped files
+# ===========================================================================
+
+quiet_cmd_shipped = SHIPPED $@
+cmd_shipped = cat $< > $@
+
+$(obj)/%: $(src)/%_shipped
+ $(call cmd,shipped)
+
+# Commands useful for building a boot image
+# ===========================================================================
+#
+# Use as following:
+#
+# target: source(s) FORCE
+# $(if_changed,ld/objcopy/gzip)
+#
+# and add target to extra-y so that we know we have to
+# read in the saved command line
+
+# Linking
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ld = LD $@
+cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@
+
+# Objcopy
+# ---------------------------------------------------------------------------
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Gzip
+# ---------------------------------------------------------------------------
+
+quiet_cmd_gzip = GZIP $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+ (rm -f $@ ; false)
+
+# DTC
+# ---------------------------------------------------------------------------
+DTC ?= $(objtree)/scripts/dtc/dtc
+
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+ -Wno-unit_address_format \
+ -Wno-avoid_unnecessary_addr_size \
+ -Wno-alias_paths \
+ -Wno-graph_child_address \
+ -Wno-graph_port \
+ -Wno-unique_unit_address \
+ -Wno-pci_device_reg
+endif
+
+ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+ -Wproperty_name_chars_strict
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtb= DTB $@
+cmd_dt_S_dtb= \
+( \
+ echo '\#include <asm-generic/vmlinux.lds.h>'; \
+ echo '.section .dtb.init.rodata,"a"'; \
+ echo '.balign STRUCT_ALIGNMENT'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
+ echo '__dtb_$(subst -,_,$(*F))_begin:'; \
+ echo '.incbin "$<" '; \
+ echo '__dtb_$(subst -,_,$(*F))_end:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_end'; \
+ echo '.balign STRUCT_ALIGNMENT'; \
+) > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
+ $(call if_changed,dt_S_dtb)
+
+quiet_cmd_dtc = DTC $@
+cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
+ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(DTC) -O dtb -o $@ -b 0 \
+ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
+ -d $(depfile).dtc.tmp $(dtc-tmp) ; \
+ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
+ $(call if_changed_dep,dtc)
+
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+# Bzip2
+# ---------------------------------------------------------------------------
+
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = printf $(shell \
+dec_size=0; \
+for F in $1; do \
+ fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+done; \
+printf "%08x\n" $$dec_size | \
+ sed 's/\(..\)/\1 /g' | { \
+ read ch0 ch1 ch2 ch3; \
+ for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
+ printf '%s%03o' '\\' $$((0x$$ch)); \
+ done; \
+ } \
+)
+
+quiet_cmd_bzip2 = BZIP2 $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+ bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+# Lzma
+# ---------------------------------------------------------------------------
+
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_lz4 = LZ4 $@
+cmd_lz4 = (cat $(filter-out FORCE,$^) | \
+ lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+# U-Boot mkimage
+# ---------------------------------------------------------------------------
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
+# the number of overrides in arch makefiles
+UIMAGE_ARCH ?= $(SRCARCH)
+UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
+UIMAGE_OPTS-y ?=
+UIMAGE_TYPE ?= kernel
+UIMAGE_LOADADDR ?= arch_must_set_this
+UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
+UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
+UIMAGE_IN ?= $<
+UIMAGE_OUT ?= $@
+
+quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
+ -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
+ -T $(UIMAGE_TYPE) \
+ -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
+ -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
+
+# XZ
+# ---------------------------------------------------------------------------
+# Use xzkern to compress the kernel image and xzmisc to compress other things.
+#
+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
+# of the kernel decompressor. A BCJ filter is used if it is available for
+# the target architecture. xzkern also appends uncompressed size of the data
+# using size_append. The .xz format has the size information available at
+# the end of the file too, but it's in more complex format and it's good to
+# avoid changing the part of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the xz tool think that
+# the file is corrupt. This is expected.
+#
+# xzmisc doesn't use size_append, so it can be used to create normal .xz
+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
+# big dictionary would increase the memory usage too much in the multi-call
+# decompression mode. A BCJ filter isn't used either.
+quiet_cmd_xzkern = XZKERN $@
+cmd_xzkern = (cat $(filter-out FORCE,$^) | \
+ sh $(srctree)/scripts/xz_wrap.sh && \
+ $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_xzmisc = XZMISC $@
+cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
+ xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
+ (rm -f $@ ; false)
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+#
+# Use [:space:] because LLVM's integrated assembler inserts <tab> around
+# the .ascii directive whereas GCC keeps the <space> as-is.
+define sed-offsets
+ 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
+ /^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}'
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-offsets) < $<; \
+ echo ""; \
+ echo "#endif" )
+endef