v4.19.13 snapshot.
diff --git a/net/802/fddi.c b/net/802/fddi.c
new file mode 100644
index 0000000..90f1416
--- /dev/null
+++ b/net/802/fddi.c
@@ -0,0 +1,182 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * FDDI-type device handling.
+ *
+ * Version: @(#)fddi.c 1.0.0 08/12/96
+ *
+ * Authors: Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ * fddi.c is based on previous eth.c and tr.c work by
+ * Ross Biro
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Mark Evans, <evansmp@uhura.aston.ac.uk>
+ * Florian La Roche, <rzsfl@rz.uni-sb.de>
+ * Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Changes
+ * Alan Cox : New arp/rebuild header
+ * Maciej W. Rozycki : IPv6 support
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <net/arp.h>
+#include <net/sock.h>
+
+/*
+ * Create the FDDI MAC header for an arbitrary protocol layer
+ *
+ * saddr=NULL means use device source address
+ * daddr=NULL means leave destination address (eg unresolved arp)
+ */
+
+static int fddi_header(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type,
+ const void *daddr, const void *saddr, unsigned int len)
+{
+ int hl = FDDI_K_SNAP_HLEN;
+ struct fddihdr *fddi;
+
+ if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
+ hl=FDDI_K_8022_HLEN-3;
+ fddi = skb_push(skb, hl);
+ fddi->fc = FDDI_FC_K_ASYNC_LLC_DEF;
+ if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP)
+ {
+ fddi->hdr.llc_snap.dsap = FDDI_EXTENDED_SAP;
+ fddi->hdr.llc_snap.ssap = FDDI_EXTENDED_SAP;
+ fddi->hdr.llc_snap.ctrl = FDDI_UI_CMD;
+ fddi->hdr.llc_snap.oui[0] = 0x00;
+ fddi->hdr.llc_snap.oui[1] = 0x00;
+ fddi->hdr.llc_snap.oui[2] = 0x00;
+ fddi->hdr.llc_snap.ethertype = htons(type);
+ }
+
+ /* Set the source and destination hardware addresses */
+
+ if (saddr != NULL)
+ memcpy(fddi->saddr, saddr, dev->addr_len);
+ else
+ memcpy(fddi->saddr, dev->dev_addr, dev->addr_len);
+
+ if (daddr != NULL)
+ {
+ memcpy(fddi->daddr, daddr, dev->addr_len);
+ return hl;
+ }
+
+ return -hl;
+}
+
+/*
+ * Determine the packet's protocol ID and fill in skb fields.
+ * This routine is called before an incoming packet is passed
+ * up. It's used to fill in specific skb fields and to set
+ * the proper pointer to the start of packet data (skb->data).
+ */
+
+__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fddihdr *fddi = (struct fddihdr *)skb->data;
+ __be16 type;
+
+ /*
+ * Set mac.raw field to point to FC byte, set data field to point
+ * to start of packet data. Assume 802.2 SNAP frames for now.
+ */
+
+ skb->dev = dev;
+ skb_reset_mac_header(skb); /* point to frame control (FC) */
+
+ if(fddi->hdr.llc_8022_1.dsap==0xe0)
+ {
+ skb_pull(skb, FDDI_K_8022_HLEN-3);
+ type = htons(ETH_P_802_2);
+ }
+ else
+ {
+ skb_pull(skb, FDDI_K_SNAP_HLEN); /* adjust for 21 byte header */
+ type=fddi->hdr.llc_snap.ethertype;
+ }
+
+ /* Set packet type based on destination address and flag settings */
+
+ if (*fddi->daddr & 0x01)
+ {
+ if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
+ skb->pkt_type = PACKET_BROADCAST;
+ else
+ skb->pkt_type = PACKET_MULTICAST;
+ }
+
+ else if (dev->flags & IFF_PROMISC)
+ {
+ if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
+ skb->pkt_type = PACKET_OTHERHOST;
+ }
+
+ /* Assume 802.2 SNAP frames, for now */
+
+ return type;
+}
+
+EXPORT_SYMBOL(fddi_type_trans);
+
+static const struct header_ops fddi_header_ops = {
+ .create = fddi_header,
+};
+
+
+static void fddi_setup(struct net_device *dev)
+{
+ dev->header_ops = &fddi_header_ops;
+ dev->type = ARPHRD_FDDI;
+ dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
+ dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
+ dev->min_mtu = FDDI_K_SNAP_HLEN;
+ dev->max_mtu = FDDI_K_SNAP_DLEN;
+ dev->addr_len = FDDI_K_ALEN;
+ dev->tx_queue_len = 100; /* Long queues on FDDI */
+ dev->flags = IFF_BROADCAST | IFF_MULTICAST;
+
+ memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
+}
+
+/**
+ * alloc_fddidev - Register FDDI device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this FDDI device
+ *
+ * Fill in the fields of the device structure with FDDI-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_fddidev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "fddi%d", NET_NAME_UNKNOWN,
+ fddi_setup);
+}
+EXPORT_SYMBOL(alloc_fddidev);
+
+MODULE_LICENSE("GPL");