v4.19.13 snapshot.
diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h
new file mode 100644
index 0000000..5b99cb2
--- /dev/null
+++ b/include/soc/fsl/bman.h
@@ -0,0 +1,137 @@
+/* Copyright 2008 - 2016 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_BMAN_H
+#define __FSL_BMAN_H
+
+/* wrapper for 48-bit buffers */
+struct bm_buffer {
+ union {
+ struct {
+ __be16 bpid; /* hi 8-bits reserved */
+ __be16 hi; /* High 16-bits of 48-bit address */
+ __be32 lo; /* Low 32-bits of 48-bit address */
+ };
+ __be64 data;
+ };
+} __aligned(8);
+/*
+ * Restore the 48 bit address previously stored in BMan
+ * hardware pools as a dma_addr_t
+ */
+static inline dma_addr_t bm_buf_addr(const struct bm_buffer *buf)
+{
+ return be64_to_cpu(buf->data) & 0xffffffffffffLLU;
+}
+
+static inline u64 bm_buffer_get64(const struct bm_buffer *buf)
+{
+ return be64_to_cpu(buf->data) & 0xffffffffffffLLU;
+}
+
+static inline void bm_buffer_set64(struct bm_buffer *buf, u64 addr)
+{
+ buf->hi = cpu_to_be16(upper_32_bits(addr));
+ buf->lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline u8 bm_buffer_get_bpid(const struct bm_buffer *buf)
+{
+ return be16_to_cpu(buf->bpid) & 0xff;
+}
+
+static inline void bm_buffer_set_bpid(struct bm_buffer *buf, int bpid)
+{
+ buf->bpid = cpu_to_be16(bpid & 0xff);
+}
+
+/* Managed portal, high-level i/face */
+
+/* Portal and Buffer Pools */
+struct bman_portal;
+struct bman_pool;
+
+#define BM_POOL_MAX 64 /* max # of buffer pools */
+
+/**
+ * bman_new_pool - Allocates a Buffer Pool object
+ *
+ * Creates a pool object, and returns a reference to it or NULL on error.
+ */
+struct bman_pool *bman_new_pool(void);
+
+/**
+ * bman_free_pool - Deallocates a Buffer Pool object
+ * @pool: the pool object to release
+ */
+void bman_free_pool(struct bman_pool *pool);
+
+/**
+ * bman_get_bpid - Returns a pool object's BPID.
+ * @pool: the pool object
+ *
+ * The returned value is the index of the encapsulated buffer pool,
+ * in the range of [0, @BM_POOL_MAX-1].
+ */
+int bman_get_bpid(const struct bman_pool *pool);
+
+/**
+ * bman_release - Release buffer(s) to the buffer pool
+ * @pool: the buffer pool object to release to
+ * @bufs: an array of buffers to release
+ * @num: the number of buffers in @bufs (1-8)
+ *
+ * Adds the given buffers to RCR entries. If the RCR ring is unresponsive,
+ * the function will return -ETIMEDOUT. Otherwise, it returns zero.
+ */
+int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num);
+
+/**
+ * bman_acquire - Acquire buffer(s) from a buffer pool
+ * @pool: the buffer pool object to acquire from
+ * @bufs: array for storing the acquired buffers
+ * @num: the number of buffers desired (@bufs is at least this big)
+ *
+ * Issues an "Acquire" command via the portal's management command interface.
+ * The return value will be the number of buffers obtained from the pool, or a
+ * negative error code if a h/w error or pool starvation was encountered. In
+ * the latter case, the content of @bufs is undefined.
+ */
+int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num);
+
+/**
+ * bman_is_probed - Check if bman is probed
+ *
+ * Returns 1 if the bman driver successfully probed, -1 if the bman driver
+ * failed to probe or 0 if the bman driver did not probed yet.
+ */
+int bman_is_probed(void);
+
+#endif /* __FSL_BMAN_H */
diff --git a/include/soc/fsl/dpaa2-fd.h b/include/soc/fsl/dpaa2-fd.h
new file mode 100644
index 0000000..2576aba
--- /dev/null
+++ b/include/soc/fsl/dpaa2-fd.h
@@ -0,0 +1,438 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_FD_H
+#define __FSL_DPAA2_FD_H
+
+#include <linux/kernel.h>
+
+/**
+ * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2
+ *
+ * Frame Descriptors (FDs) are used to describe frame data in the DPAA2.
+ * Frames can be enqueued and dequeued to Frame Queues (FQs) which are consumed
+ * by the various DPAA accelerators (WRIOP, SEC, PME, DCE)
+ *
+ * There are three types of frames: single, scatter gather, and frame lists.
+ *
+ * The set of APIs in this file must be used to create, manipulate and
+ * query Frame Descriptors.
+ */
+
+/**
+ * struct dpaa2_fd - Struct describing FDs
+ * @words: for easier/faster copying the whole FD structure
+ * @addr: address in the FD
+ * @len: length in the FD
+ * @bpid: buffer pool ID
+ * @format_offset: format, offset, and short-length fields
+ * @frc: frame context
+ * @ctrl: control bits...including dd, sc, va, err, etc
+ * @flc: flow context address
+ *
+ * This structure represents the basic Frame Descriptor used in the system.
+ */
+struct dpaa2_fd {
+ union {
+ u32 words[8];
+ struct dpaa2_fd_simple {
+ __le64 addr;
+ __le32 len;
+ __le16 bpid;
+ __le16 format_offset;
+ __le32 frc;
+ __le32 ctrl;
+ __le64 flc;
+ } simple;
+ };
+};
+
+#define FD_SHORT_LEN_FLAG_MASK 0x1
+#define FD_SHORT_LEN_FLAG_SHIFT 14
+#define FD_SHORT_LEN_MASK 0x3FFFF
+#define FD_OFFSET_MASK 0x0FFF
+#define FD_FORMAT_MASK 0x3
+#define FD_FORMAT_SHIFT 12
+#define FD_BPID_MASK 0x3FFF
+#define SG_SHORT_LEN_FLAG_MASK 0x1
+#define SG_SHORT_LEN_FLAG_SHIFT 14
+#define SG_SHORT_LEN_MASK 0x1FFFF
+#define SG_OFFSET_MASK 0x0FFF
+#define SG_FORMAT_MASK 0x3
+#define SG_FORMAT_SHIFT 12
+#define SG_BPID_MASK 0x3FFF
+#define SG_FINAL_FLAG_MASK 0x1
+#define SG_FINAL_FLAG_SHIFT 15
+
+/* Error bits in FD CTRL */
+#define FD_CTRL_ERR_MASK 0x000000FF
+#define FD_CTRL_UFD 0x00000004
+#define FD_CTRL_SBE 0x00000008
+#define FD_CTRL_FLC 0x00000010
+#define FD_CTRL_FSE 0x00000020
+#define FD_CTRL_FAERR 0x00000040
+
+/* Annotation bits in FD CTRL */
+#define FD_CTRL_PTA 0x00800000
+#define FD_CTRL_PTV1 0x00400000
+
+enum dpaa2_fd_format {
+ dpaa2_fd_single = 0,
+ dpaa2_fd_list,
+ dpaa2_fd_sg
+};
+
+/**
+ * dpaa2_fd_get_addr() - get the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the address in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd)
+{
+ return (dma_addr_t)le64_to_cpu(fd->simple.addr);
+}
+
+/**
+ * dpaa2_fd_set_addr() - Set the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ * @addr: the address needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr)
+{
+ fd->simple.addr = cpu_to_le64(addr);
+}
+
+/**
+ * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the frame context field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd)
+{
+ return le32_to_cpu(fd->simple.frc);
+}
+
+/**
+ * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ * @frc: the frame context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc)
+{
+ fd->simple.frc = cpu_to_le32(frc);
+}
+
+/**
+ * dpaa2_fd_get_ctrl() - Get the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the control bits field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_ctrl(const struct dpaa2_fd *fd)
+{
+ return le32_to_cpu(fd->simple.ctrl);
+}
+
+/**
+ * dpaa2_fd_set_ctrl() - Set the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ * @ctrl: the control bits to be set in the frame descriptor
+ */
+static inline void dpaa2_fd_set_ctrl(struct dpaa2_fd *fd, u32 ctrl)
+{
+ fd->simple.ctrl = cpu_to_le32(ctrl);
+}
+
+/**
+ * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the flow context in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd)
+{
+ return (dma_addr_t)le64_to_cpu(fd->simple.flc);
+}
+
+/**
+ * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor
+ * @fd: the given frame descriptor
+ * @flc_addr: the flow context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd, dma_addr_t flc_addr)
+{
+ fd->simple.flc = cpu_to_le64(flc_addr);
+}
+
+static inline bool dpaa2_fd_short_len(const struct dpaa2_fd *fd)
+{
+ return !!((le16_to_cpu(fd->simple.format_offset) >>
+ FD_SHORT_LEN_FLAG_SHIFT) & FD_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_fd_get_len() - Get the length in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the length field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd)
+{
+ if (dpaa2_fd_short_len(fd))
+ return le32_to_cpu(fd->simple.len) & FD_SHORT_LEN_MASK;
+
+ return le32_to_cpu(fd->simple.len);
+}
+
+/**
+ * dpaa2_fd_set_len() - Set the length field of frame descriptor
+ * @fd: the given frame descriptor
+ * @len: the length needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len)
+{
+ fd->simple.len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the offset.
+ */
+static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd)
+{
+ return le16_to_cpu(fd->simple.format_offset) & FD_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_fd_set_offset() - Set the offset field of frame descriptor
+ * @fd: the given frame descriptor
+ * @offset: the offset needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset)
+{
+ fd->simple.format_offset &= cpu_to_le16(~FD_OFFSET_MASK);
+ fd->simple.format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_fd_get_format() - Get the format field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_fd_format dpaa2_fd_get_format(
+ const struct dpaa2_fd *fd)
+{
+ return (enum dpaa2_fd_format)((le16_to_cpu(fd->simple.format_offset)
+ >> FD_FORMAT_SHIFT) & FD_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_fd_set_format() - Set the format field of frame descriptor
+ * @fd: the given frame descriptor
+ * @format: the format needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd,
+ enum dpaa2_fd_format format)
+{
+ fd->simple.format_offset &=
+ cpu_to_le16(~(FD_FORMAT_MASK << FD_FORMAT_SHIFT));
+ fd->simple.format_offset |= cpu_to_le16(format << FD_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the buffer pool id.
+ */
+static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd)
+{
+ return le16_to_cpu(fd->simple.bpid) & FD_BPID_MASK;
+}
+
+/**
+ * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor
+ * @fd: the given frame descriptor
+ * @bpid: buffer pool id to be set
+ */
+static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid)
+{
+ fd->simple.bpid &= cpu_to_le16(~(FD_BPID_MASK));
+ fd->simple.bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * struct dpaa2_sg_entry - the scatter-gathering structure
+ * @addr: address of the sg entry
+ * @len: length in this sg entry
+ * @bpid: buffer pool id
+ * @format_offset: format and offset fields
+ */
+struct dpaa2_sg_entry {
+ __le64 addr;
+ __le32 len;
+ __le16 bpid;
+ __le16 format_offset;
+};
+
+enum dpaa2_sg_format {
+ dpaa2_sg_single = 0,
+ dpaa2_sg_frame_data,
+ dpaa2_sg_sgt_ext
+};
+
+/* Accessors for SG entry fields */
+
+/**
+ * dpaa2_sg_get_addr() - Get the address from SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the address.
+ */
+static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg)
+{
+ return (dma_addr_t)le64_to_cpu(sg->addr);
+}
+
+/**
+ * dpaa2_sg_set_addr() - Set the address in SG entry
+ * @sg: the given scatter-gathering object
+ * @addr: the address to be set
+ */
+static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr)
+{
+ sg->addr = cpu_to_le64(addr);
+}
+
+static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg)
+{
+ return !!((le16_to_cpu(sg->format_offset) >> SG_SHORT_LEN_FLAG_SHIFT)
+ & SG_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_sg_get_len() - Get the length in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the length.
+ */
+static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg)
+{
+ if (dpaa2_sg_short_len(sg))
+ return le32_to_cpu(sg->len) & SG_SHORT_LEN_MASK;
+
+ return le32_to_cpu(sg->len);
+}
+
+/**
+ * dpaa2_sg_set_len() - Set the length in SG entry
+ * @sg: the given scatter-gathering object
+ * @len: the length to be set
+ */
+static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len)
+{
+ sg->len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_sg_get_offset() - Get the offset in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the offset.
+ */
+static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg)
+{
+ return le16_to_cpu(sg->format_offset) & SG_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_sg_set_offset() - Set the offset in SG entry
+ * @sg: the given scatter-gathering object
+ * @offset: the offset to be set
+ */
+static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg,
+ u16 offset)
+{
+ sg->format_offset &= cpu_to_le16(~SG_OFFSET_MASK);
+ sg->format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_sg_get_format() - Get the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_sg_format
+ dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg)
+{
+ return (enum dpaa2_sg_format)((le16_to_cpu(sg->format_offset)
+ >> SG_FORMAT_SHIFT) & SG_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_sg_set_format() - Set the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ * @format: the format to be set
+ */
+static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg,
+ enum dpaa2_sg_format format)
+{
+ sg->format_offset &= cpu_to_le16(~(SG_FORMAT_MASK << SG_FORMAT_SHIFT));
+ sg->format_offset |= cpu_to_le16(format << SG_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the bpid.
+ */
+static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg)
+{
+ return le16_to_cpu(sg->bpid) & SG_BPID_MASK;
+}
+
+/**
+ * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ * @bpid: the bpid to be set
+ */
+static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid)
+{
+ sg->bpid &= cpu_to_le16(~(SG_BPID_MASK));
+ sg->bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * dpaa2_sg_is_final() - Check final bit in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return bool.
+ */
+static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg)
+{
+ return !!(le16_to_cpu(sg->format_offset) >> SG_FINAL_FLAG_SHIFT);
+}
+
+/**
+ * dpaa2_sg_set_final() - Set the final bit in SG entry
+ * @sg: the given scatter-gathering object
+ * @final: the final boolean to be set
+ */
+static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final)
+{
+ sg->format_offset &= cpu_to_le16((~(SG_FINAL_FLAG_MASK
+ << SG_FINAL_FLAG_SHIFT)) & 0xFFFF);
+ sg->format_offset |= cpu_to_le16(final << SG_FINAL_FLAG_SHIFT);
+}
+
+#endif /* __FSL_DPAA2_FD_H */
diff --git a/include/soc/fsl/dpaa2-global.h b/include/soc/fsl/dpaa2-global.h
new file mode 100644
index 0000000..9bc0713
--- /dev/null
+++ b/include/soc/fsl/dpaa2-global.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_GLOBAL_H
+#define __FSL_DPAA2_GLOBAL_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include "dpaa2-fd.h"
+
+struct dpaa2_dq {
+ union {
+ struct common {
+ u8 verb;
+ u8 reserved[63];
+ } common;
+ struct dq {
+ u8 verb;
+ u8 stat;
+ __le16 seqnum;
+ __le16 oprid;
+ u8 reserved;
+ u8 tok;
+ __le32 fqid;
+ u32 reserved2;
+ __le32 fq_byte_cnt;
+ __le32 fq_frm_cnt;
+ __le64 fqd_ctx;
+ u8 fd[32];
+ } dq;
+ struct scn {
+ u8 verb;
+ u8 stat;
+ u8 state;
+ u8 reserved;
+ __le32 rid_tok;
+ __le64 ctx;
+ } scn;
+ };
+};
+
+/* Parsing frame dequeue results */
+/* FQ empty */
+#define DPAA2_DQ_STAT_FQEMPTY 0x80
+/* FQ held active */
+#define DPAA2_DQ_STAT_HELDACTIVE 0x40
+/* FQ force eligible */
+#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20
+/* valid frame */
+#define DPAA2_DQ_STAT_VALIDFRAME 0x10
+/* FQ ODP enable */
+#define DPAA2_DQ_STAT_ODPVALID 0x04
+/* volatile dequeue */
+#define DPAA2_DQ_STAT_VOLATILE 0x02
+/* volatile dequeue command is expired */
+#define DPAA2_DQ_STAT_EXPIRED 0x01
+
+#define DQ_FQID_MASK 0x00FFFFFF
+#define DQ_FRAME_COUNT_MASK 0x00FFFFFF
+
+/**
+ * dpaa2_dq_flags() - Get the stat field of dequeue response
+ * @dq: the dequeue result.
+ */
+static inline u32 dpaa2_dq_flags(const struct dpaa2_dq *dq)
+{
+ return dq->dq.stat;
+}
+
+/**
+ * dpaa2_dq_is_pull() - Check whether the dq response is from a pull
+ * command.
+ * @dq: the dequeue result
+ *
+ * Return 1 for volatile(pull) dequeue, 0 for static dequeue.
+ */
+static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq)
+{
+ return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE);
+}
+
+/**
+ * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed.
+ * @dq: the dequeue result
+ *
+ * Return boolean.
+ */
+static inline bool dpaa2_dq_is_pull_complete(const struct dpaa2_dq *dq)
+{
+ return !!(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED);
+}
+
+/**
+ * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response
+ * @dq: the dequeue result
+ *
+ * seqnum is valid only if VALIDFRAME flag is TRUE
+ *
+ * Return seqnum.
+ */
+static inline u16 dpaa2_dq_seqnum(const struct dpaa2_dq *dq)
+{
+ return le16_to_cpu(dq->dq.seqnum);
+}
+
+/**
+ * dpaa2_dq_odpid() - Get the odpid field in dequeue response
+ * @dq: the dequeue result
+ *
+ * odpid is valid only if ODPVALID flag is TRUE.
+ *
+ * Return odpid.
+ */
+static inline u16 dpaa2_dq_odpid(const struct dpaa2_dq *dq)
+{
+ return le16_to_cpu(dq->dq.oprid);
+}
+
+/**
+ * dpaa2_dq_fqid() - Get the fqid in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return fqid.
+ */
+static inline u32 dpaa2_dq_fqid(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fqid) & DQ_FQID_MASK;
+}
+
+/**
+ * dpaa2_dq_byte_count() - Get the byte count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the byte count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_byte_count(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fq_byte_cnt);
+}
+
+/**
+ * dpaa2_dq_frame_count() - Get the frame count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_frame_count(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fq_frm_cnt) & DQ_FRAME_COUNT_MASK;
+}
+
+/**
+ * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame queue context.
+ */
+static inline u64 dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq)
+{
+ return le64_to_cpu(dq->dq.fqd_ctx);
+}
+
+/**
+ * dpaa2_dq_fd() - Get the frame descriptor in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame descriptor.
+ */
+static inline const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq)
+{
+ return (const struct dpaa2_fd *)&dq->dq.fd[0];
+}
+
+#endif /* __FSL_DPAA2_GLOBAL_H */
diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
new file mode 100644
index 0000000..ab51e40
--- /dev/null
+++ b/include/soc/fsl/dpaa2-io.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright NXP
+ *
+ */
+#ifndef __FSL_DPAA2_IO_H
+#define __FSL_DPAA2_IO_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+
+#include "dpaa2-fd.h"
+#include "dpaa2-global.h"
+
+struct dpaa2_io;
+struct dpaa2_io_store;
+struct device;
+
+/**
+ * DOC: DPIO Service
+ *
+ * The DPIO service provides APIs for users to interact with the datapath
+ * by enqueueing and dequeing frame descriptors.
+ *
+ * The following set of APIs can be used to enqueue and dequeue frames
+ * as well as producing notification callbacks when data is available
+ * for dequeue.
+ */
+
+#define DPAA2_IO_ANY_CPU -1
+
+/**
+ * struct dpaa2_io_desc - The DPIO descriptor
+ * @receives_notifications: Use notificaton mode. Non-zero if the DPIO
+ * has a channel.
+ * @has_8prio: Set to non-zero for channel with 8 priority WQs. Ignored
+ * unless receives_notification is TRUE.
+ * @cpu: The cpu index that at least interrupt handlers will
+ * execute on.
+ * @stash_affinity: The stash affinity for this portal favour 'cpu'
+ * @regs_cena: The cache enabled regs.
+ * @regs_cinh: The cache inhibited regs
+ * @dpio_id: The dpio index
+ * @qman_version: The qman version
+ *
+ * Describes the attributes and features of the DPIO object.
+ */
+struct dpaa2_io_desc {
+ int receives_notifications;
+ int has_8prio;
+ int cpu;
+ void *regs_cena;
+ void __iomem *regs_cinh;
+ int dpio_id;
+ u32 qman_version;
+};
+
+struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc);
+
+void dpaa2_io_down(struct dpaa2_io *d);
+
+irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj);
+
+struct dpaa2_io *dpaa2_io_service_select(int cpu);
+
+/**
+ * struct dpaa2_io_notification_ctx - The DPIO notification context structure
+ * @cb: The callback to be invoked when the notification arrives
+ * @is_cdan: Zero for FQDAN, non-zero for CDAN
+ * @id: FQID or channel ID, needed for rearm
+ * @desired_cpu: The cpu on which the notifications will show up. Use
+ * DPAA2_IO_ANY_CPU if don't care
+ * @dpio_id: The dpio index
+ * @qman64: The 64-bit context value shows up in the FQDAN/CDAN.
+ * @node: The list node
+ * @dpio_private: The dpio object internal to dpio_service
+ *
+ * Used when a FQDAN/CDAN registration is made by drivers.
+ */
+struct dpaa2_io_notification_ctx {
+ void (*cb)(struct dpaa2_io_notification_ctx *ctx);
+ int is_cdan;
+ u32 id;
+ int desired_cpu;
+ int dpio_id;
+ u64 qman64;
+ struct list_head node;
+ void *dpio_private;
+};
+
+int dpaa2_io_service_register(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+void dpaa2_io_service_deregister(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+int dpaa2_io_service_rearm(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+
+int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
+ struct dpaa2_io_store *s);
+
+int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
+ u16 qdbin, const struct dpaa2_fd *fd);
+int dpaa2_io_service_release(struct dpaa2_io *d, u32 bpid,
+ const u64 *buffers, unsigned int num_buffers);
+int dpaa2_io_service_acquire(struct dpaa2_io *d, u32 bpid,
+ u64 *buffers, unsigned int num_buffers);
+
+struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
+ struct device *dev);
+void dpaa2_io_store_destroy(struct dpaa2_io_store *s);
+struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last);
+
+#endif /* __FSL_DPAA2_IO_H */
diff --git a/include/soc/fsl/qe/immap_qe.h b/include/soc/fsl/qe/immap_qe.h
new file mode 100644
index 0000000..7baaabd
--- /dev/null
+++ b/include/soc/fsl/qe/immap_qe.h
@@ -0,0 +1,469 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x04];
+ __be32 iready; /* I-RAM Ready Register */
+ u8 res1[0x70];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x3A];
+ __be32 ceurnr; /* QE microcode revision number register */
+ u8 res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr[4]; /* CMX UCCx clock route registers */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc[16]; /* BRG configuration registers */
+ u8 res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+ __be16 sixmr1[4]; /* SI1 TDMx (x = A B C D) mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct qe_usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct qe_mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 res4[0x52];
+ u8 guemr; /* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ u8 res[0x200]; /* UCC blocks are 512 bytes each */
+ };
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint). These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+ __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
+ u8 res0[64];
+ __be32 ibcr0;
+ __be32 ibs0;
+ __be32 ibcnr0;
+ u8 res1[4];
+ __be32 ibcr1;
+ __be32 ibs1;
+ __be32 ibcnr1;
+ __be32 npcr;
+ __be32 dbcr;
+ __be32 dbar;
+ __be32 dbamr;
+ __be32 dbsr;
+ __be32 dbcnr;
+ u8 res2[12];
+ __be32 dbdr_h;
+ __be32 dbdr_l;
+ __be32 dbdmr_h;
+ __be32 dbdmr_l;
+ __be32 bsr;
+ __be32 bor;
+ __be32 bior;
+ u8 res3[4];
+ __be32 iatr[4];
+ __be32 eccr; /* Exception control configuration register */
+ __be32 eicr;
+ u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct qe_mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct qe_usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* 0x104080 - 0x1040FF
+ Debug Space */
+ struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
+ RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300]; /* 0x104300 - 0x1045FF */
+ u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
new file mode 100644
index 0000000..b3d1aff
--- /dev/null
+++ b/include/soc/fsl/qe/qe.h
@@ -0,0 +1,817 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/genalloc.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <asm/cpm.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
+
+#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_RSYNC_PIN, /* RSYNC from pin */
+ QE_TSYNC_PIN, /* TSYNC from pin */
+ QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+ return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+#else
+static inline void qe_reset(void) {}
+#endif
+
+int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long cpm_muram_alloc(unsigned long size,
+ unsigned long align)
+{
+ return -ENOSYS;
+}
+
+static inline int cpm_muram_free(unsigned long offset)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
+{
+ return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+ return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(void __iomem *addr)
+{
+ return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+ u8 pad[8];
+#endif
+};
+
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+ int dir, int open_drain, int assignment,
+ int has_irq);
+#ifdef CONFIG_QUICC_ENGINE
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+#else
+static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq) { return -ENOSYS; }
+static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+#ifdef CONFIG_QE_GPIO
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+#else
+static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline void qe_pin_free(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
+#endif /* CONFIG_QE_GPIO */
+
+#ifdef CONFIG_QUICC_ENGINE
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+ u32 cmd_input)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+ /*
+ * MPC8568E reference manual says:
+ *
+ * "...power down sequence waits for all I/O interfaces to become idle.
+ * In some applications this may happen eventually without actively
+ * shutting down interfaces, but most likely, software will have to
+ * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+ * interfaces before issuing the command (either the write to the core
+ * MSR[WE] as described above or writing to POWMGTCSR) to put the
+ * device into sleep state."
+ *
+ * MPC8569E reference manual has a similar paragraph.
+ */
+#ifdef CONFIG_PPC_85xx
+ return 0;
+#else
+ return 1;
+#endif
+}
+
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
+#define qe_muram_dma cpm_muram_dma
+
+#define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
+#define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+
+#define qe_setbits16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
+#define qe_clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+
+#define qe_setbits8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
+#define qe_clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+
+#define qe_clrsetbits32(addr, clear, set) \
+ iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits16(addr, clear, set) \
+ iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits8(addr, clear, set) \
+ iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+ struct qe_header {
+ __be32 length; /* Length of the entire structure, in bytes */
+ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
+ u8 version; /* Version of this layout. First ver is '1' */
+ } header;
+ u8 id[62]; /* Null-terminated identifier string */
+ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
+ u8 count; /* Number of microcode[] structures */
+ struct {
+ __be16 model; /* The SOC model */
+ u8 major; /* The SOC revision major */
+ u8 minor; /* The SOC revision minor */
+ } __attribute__ ((packed)) soc;
+ u8 padding[4]; /* Reserved, for alignment */
+ __be64 extended_modes; /* Extended modes */
+ __be32 vtraps[8]; /* Virtual trap addresses */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ struct qe_microcode {
+ u8 id[32]; /* Null-terminated identifier */
+ __be32 traps[16]; /* Trap addresses, 0 == ignore */
+ __be32 eccr; /* The value for the ECCR register */
+ __be32 iram_offset; /* Offset into I-RAM for the code */
+ __be32 count; /* Number of 32-bit words of the code */
+ __be32 code_offset; /* Offset of the actual microcode */
+ u8 major; /* The microcode version major */
+ u8 minor; /* The microcode version minor */
+ u8 revision; /* The microcode version revision */
+ u8 padding; /* Reserved, for alignment */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ } __attribute__ ((packed)) microcode[1];
+ /* All microcode binaries should be located here */
+ /* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+ char id[64]; /* Firmware name */
+ u32 vtraps[8]; /* Virtual trap addresses */
+ u64 extended_modes; /* Extended modes */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+ __be16 status;
+ __be16 length;
+ __be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2 | \
+ QE_RISC_ALLOCATION_RISC3 | \
+ QE_RISC_ALLOCATION_RISC4)
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+#define QE_CMXGCR_USBCS_CLK3 0x1
+#define QE_CMXGCR_USBCS_CLK5 0x2
+#define QE_CMXGCR_USBCS_CLK7 0x3
+#define QE_CMXGCR_USBCS_CLK9 0x4
+#define QE_CMXGCR_USBCS_CLK13 0x5
+#define QE_CMXGCR_USBCS_CLK17 0x6
+#define QE_CMXGCR_USBCS_CLK19 0x7
+#define QE_CMXGCR_USBCS_CLK21 0x8
+#define QE_CMXGCR_USBCS_BRG9 0x9
+#define QE_CMXGCR_USBCS_BRG10 0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000c
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_QMC 0x02
+#define QE_CR_PROTOCOL_UART 0x04
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+#define QE_IRAM_READY 0x80000000 /* Ready */
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ __be16 rbase; /* RX BD base address */
+ __be16 tbase; /* TX BD base address */
+ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
+ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
+ __be16 mrblr; /* Rx buffer length */
+ __be32 rstate; /* Rx internal state */
+ __be32 rptr; /* Rx internal data pointer */
+ __be16 rbptr; /* rb BD Pointer */
+ __be16 rcount; /* Rx internal byte count */
+ __be32 rtemp; /* Rx temp */
+ __be32 tstate; /* Tx internal state */
+ __be32 tptr; /* Tx internal data pointer */
+ __be16 tbptr; /* Tx BD pointer */
+ __be16 tcount; /* Tx byte count */
+ __be32 ttemp; /* Tx temp */
+ __be32 rcrc; /* temp receive CRC */
+ __be32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_LOOPBACK 0x40000000
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_SYNL_MASK 0x0000C000
+#define UCC_FAST_GUMR_SYNL_16 0x0000C000
+#define UCC_FAST_GUMR_SYNL_8 0x00008000
+#define UCC_FAST_GUMR_SYNL_AUTO 0x00004000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB 0x0200
+#define UCC_UART_UCCE_IDLE 0x0100
+#define UCC_UART_UCCE_GRA 0x0080
+#define UCC_UART_UCCE_BRKE 0x0040
+#define UCC_UART_UCCE_BRKS 0x0020
+#define UCC_UART_UCCE_CCR 0x0008
+#define UCC_UART_UCCE_BSY 0x0004
+#define UCC_UART_UCCE_TX 0x0002
+#define UCC_UART_UCCE_RX 0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR 0x1000
+#define UCC_HDLC_UCCE_GLT 0x0800
+#define UCC_HDLC_UCCE_IDLE 0x0100
+#define UCC_HDLC_UCCE_BRKE 0x0040
+#define UCC_HDLC_UCCE_BRKS 0x0020
+#define UCC_HDLC_UCCE_TXE 0x0010
+#define UCC_HDLC_UCCE_RXF 0x0008
+#define UCC_HDLC_UCCE_BSY 0x0004
+#define UCC_HDLC_UCCE_TXB 0x0002
+#define UCC_HDLC_UCCE_RXB 0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA 0x0080
+#define UCC_BISYNC_UCCE_TXE 0x0010
+#define UCC_BISYNC_UCCE_RCH 0x0008
+#define UCC_BISYNC_UCCE_BSY 0x0004
+#define UCC_BISYNC_UCCE_TXB 0x0002
+#define UCC_BISYNC_UCCE_RXB 0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD 0x80000000
+#define UCC_GETH_UCCE_SCAR 0x40000000
+#define UCC_GETH_UCCE_GRA 0x20000000
+#define UCC_GETH_UCCE_CBPR 0x10000000
+#define UCC_GETH_UCCE_BSY 0x08000000
+#define UCC_GETH_UCCE_RXC 0x04000000
+#define UCC_GETH_UCCE_TXC 0x02000000
+#define UCC_GETH_UCCE_TXE 0x01000000
+#define UCC_GETH_UCCE_TXB7 0x00800000
+#define UCC_GETH_UCCE_TXB6 0x00400000
+#define UCC_GETH_UCCE_TXB5 0x00200000
+#define UCC_GETH_UCCE_TXB4 0x00100000
+#define UCC_GETH_UCCE_TXB3 0x00080000
+#define UCC_GETH_UCCE_TXB2 0x00040000
+#define UCC_GETH_UCCE_TXB1 0x00020000
+#define UCC_GETH_UCCE_TXB0 0x00010000
+#define UCC_GETH_UCCE_RXB7 0x00008000
+#define UCC_GETH_UCCE_RXB6 0x00004000
+#define UCC_GETH_UCCE_RXB5 0x00002000
+#define UCC_GETH_UCCE_RXB4 0x00001000
+#define UCC_GETH_UCCE_RXB3 0x00000800
+#define UCC_GETH_UCCE_RXB2 0x00000400
+#define UCC_GETH_UCCE_RXB1 0x00000200
+#define UCC_GETH_UCCE_RXB0 0x00000100
+#define UCC_GETH_UCCE_RXF7 0x00000080
+#define UCC_GETH_UCCE_RXF6 0x00000040
+#define UCC_GETH_UCCE_RXF5 0x00000020
+#define UCC_GETH_UCCE_RXF4 0x00000010
+#define UCC_GETH_UCCE_RXF3 0x00000008
+#define UCC_GETH_UCCE_RXF2 0x00000004
+#define UCC_GETH_UCCE_RXF1 0x00000002
+#define UCC_GETH_UCCE_RXF0 0x00000001
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
+#define UCC_UART_UPSMR_FLC 0x8000
+#define UCC_UART_UPSMR_SL 0x4000
+#define UCC_UART_UPSMR_CL_MASK 0x3000
+#define UCC_UART_UPSMR_CL_8 0x3000
+#define UCC_UART_UPSMR_CL_7 0x2000
+#define UCC_UART_UPSMR_CL_6 0x1000
+#define UCC_UART_UPSMR_CL_5 0x0000
+#define UCC_UART_UPSMR_UM_MASK 0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL 0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
+#define UCC_UART_UPSMR_FRZ 0x0200
+#define UCC_UART_UPSMR_RZS 0x0100
+#define UCC_UART_UPSMR_SYN 0x0080
+#define UCC_UART_UPSMR_DRT 0x0040
+#define UCC_UART_UPSMR_PEN 0x0010
+#define UCC_UART_UPSMR_RPM_MASK 0x000c
+#define UCC_UART_UPSMR_RPM_ODD 0x0000
+#define UCC_UART_UPSMR_RPM_LOW 0x0004
+#define UCC_UART_UPSMR_RPM_EVEN 0x0008
+#define UCC_UART_UPSMR_RPM_HIGH 0x000C
+#define UCC_UART_UPSMR_TPM_MASK 0x0003
+#define UCC_UART_UPSMR_TPM_ODD 0x0000
+#define UCC_UART_UPSMR_TPM_LOW 0x0001
+#define UCC_UART_UPSMR_TPM_EVEN 0x0002
+#define UCC_UART_UPSMR_TPM_HIGH 0x0003
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE 0x80000000
+#define UCC_GETH_UPSMR_PTPE 0x40000000
+#define UCC_GETH_UPSMR_ECM 0x04000000
+#define UCC_GETH_UPSMR_HSE 0x02000000
+#define UCC_GETH_UPSMR_PRO 0x00400000
+#define UCC_GETH_UPSMR_CAP 0x00200000
+#define UCC_GETH_UPSMR_RSH 0x00100000
+#define UCC_GETH_UPSMR_RPM 0x00080000
+#define UCC_GETH_UPSMR_R10M 0x00040000
+#define UCC_GETH_UPSMR_RLPB 0x00020000
+#define UCC_GETH_UPSMR_TBIM 0x00010000
+#define UCC_GETH_UPSMR_RES1 0x00002000
+#define UCC_GETH_UPSMR_RMM 0x00001000
+#define UCC_GETH_UPSMR_CAM 0x00000400
+#define UCC_GETH_UPSMR_BRO 0x00000200
+#define UCC_GETH_UPSMR_SMM 0x00000080
+#define UCC_GETH_UPSMR_SGMM 0x00000020
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for HDLC */
+#define UCC_HDLC_UPSMR_RTE 0x02000000
+#define UCC_HDLC_UPSMR_BUS 0x00200000
+#define UCC_HDLC_UPSMR_CW8 0x00007000
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL 0x20
+#define UCC_BMR_BO_BE 0x10
+#define UCC_BMR_CETM 0x04
+#define UCC_BMR_DTB 0x02
+#define UCC_BMR_BDB 0x01
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/soc/fsl/qe/qe_ic.h b/include/soc/fsl/qe/qe_ic.h
new file mode 100644
index 0000000..1e155ca
--- /dev/null
+++ b/include/soc/fsl/qe/qe_ic.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+struct device_node;
+struct qe_ic;
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+void qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(struct irq_desc *desc),
+ void (*high_handler)(struct irq_desc *desc));
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+#else
+static inline void qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(struct irq_desc *desc),
+ void (*high_handler)(struct irq_desc *desc))
+{}
+static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{ return 0; }
+static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{ return 0; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ cascade_irq = qe_ic_get_high_irq(qe_ic);
+ if (cascade_irq == NO_IRQ)
+ cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/soc/fsl/qe/qe_tdm.h b/include/soc/fsl/qe/qe_tdm.h
new file mode 100644
index 0000000..a1664b6
--- /dev/null
+++ b/include/soc/fsl/qe/qe_tdm.h
@@ -0,0 +1,94 @@
+/*
+ * Internal header file for QE TDM mode routines.
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Zhao Qiang <qiang.zhao@nxp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version
+ */
+
+#ifndef _QE_TDM_H_
+#define _QE_TDM_H_
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
+
+/* SI RAM entries */
+#define SIR_LAST 0x0001
+#define SIR_BYTE 0x0002
+#define SIR_CNT(x) ((x) << 2)
+#define SIR_CSEL(x) ((x) << 5)
+#define SIR_SGS 0x0200
+#define SIR_SWTR 0x4000
+#define SIR_MCC 0x8000
+#define SIR_IDLE 0
+
+/* SIxMR fields */
+#define SIMR_SAD(x) ((x) << 12)
+#define SIMR_SDM_NORMAL 0x0000
+#define SIMR_SDM_INTERNAL_LOOPBACK 0x0800
+#define SIMR_SDM_MASK 0x0c00
+#define SIMR_CRT 0x0040
+#define SIMR_SL 0x0020
+#define SIMR_CE 0x0010
+#define SIMR_FE 0x0008
+#define SIMR_GM 0x0004
+#define SIMR_TFSD(n) (n)
+#define SIMR_RFSD(n) ((n) << 8)
+
+enum tdm_ts_t {
+ TDM_TX_TS,
+ TDM_RX_TS
+};
+
+enum tdm_framer_t {
+ TDM_FRAMER_T1,
+ TDM_FRAMER_E1
+};
+
+enum tdm_mode_t {
+ TDM_INTERNAL_LOOPBACK,
+ TDM_NORMAL
+};
+
+struct si_mode_info {
+ u8 simr_rfsd;
+ u8 simr_tfsd;
+ u8 simr_crt;
+ u8 simr_sl;
+ u8 simr_ce;
+ u8 simr_fe;
+ u8 simr_gm;
+};
+
+struct ucc_tdm_info {
+ struct ucc_fast_info uf_info;
+ struct si_mode_info si_info;
+};
+
+struct ucc_tdm {
+ u16 tdm_port; /* port for this tdm:TDMA,TDMB */
+ u32 siram_entry_id;
+ u16 __iomem *siram;
+ struct si1 __iomem *si_regs;
+ enum tdm_framer_t tdm_framer_type;
+ enum tdm_mode_t tdm_mode;
+ u8 num_of_ts; /* the number of timeslots in this tdm frame */
+ u32 tx_ts_mask; /* tx time slot mask */
+ u32 rx_ts_mask; /* rx time slot mask */
+};
+
+int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm,
+ struct ucc_tdm_info *ut_info);
+void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info);
+#endif
diff --git a/include/soc/fsl/qe/ucc.h b/include/soc/fsl/qe/ucc.h
new file mode 100644
index 0000000..6bbbb59
--- /dev/null
+++ b/include/soc/fsl/qe/ucc.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+ UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode);
+int ucc_set_tdm_rxtx_clk(unsigned int tdm_num, enum qe_clock clock,
+ enum comm_dir mode);
+int ucc_set_tdm_rxtx_sync(unsigned int tdm_num, enum qe_clock clock,
+ enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h
new file mode 100644
index 0000000..3ee9e7c
--- /dev/null
+++ b/include/soc/fsl/qe/ucc_fast.h
@@ -0,0 +1,265 @@
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+
+/* Receive BD's status and length*/
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status and length*/
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Receive BD's status */
+#define R_E_S 0x8000 /* buffer empty */
+#define R_W_S 0x2000 /* wrap bit */
+#define R_I_S 0x1000 /* interrupt on reception */
+#define R_L_S 0x0800 /* last */
+#define R_F_S 0x0400 /* first */
+#define R_CM_S 0x0200 /* continuous mode */
+#define R_CR_S 0x0004 /* crc */
+#define R_OV_S 0x0002 /* crc */
+
+/* transmit BD's status */
+#define T_R_S 0x8000 /* ready bit */
+#define T_W_S 0x2000 /* wrap bit */
+#define T_I_S 0x1000 /* interrupt on completion */
+#define T_L_S 0x0800 /* last */
+#define T_TC_S 0x0400 /* crc */
+#define T_TM_S 0x0200 /* continuous mode */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+ int ucc_num;
+ int tdm_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ enum qe_clock rx_sync;
+ enum qe_clock tx_sync;
+ resource_size_t regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ enum ucc_fast_channel_protocol_mode mode;
+ enum ucc_fast_transparent_txrx ttx_trx;
+ enum ucc_fast_tx_encoding_method tenc;
+ enum ucc_fast_rx_decoding_method renc;
+ enum ucc_fast_transparent_tcrc tcrc;
+ enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+ struct ucc_fast_info *uf_info;
+ struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+ u32 __iomem *p_ucce; /* a pointer to the event register in memory. */
+ u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+ u16 __iomem *p_utodr; /* pointer to the transmit on demand register */
+#endif
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h
new file mode 100644
index 0000000..6c0573a
--- /dev/null
+++ b/include/soc/fsl/qe/ucc_slow.h
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision */
+#define T_RL 0x00400000 /* retransmission limit */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost */
+#define T_RC 0x003c0000 /* retry count */
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+ /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+ /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+ /* 32-bit CCITT CRC (Ethernet and HDLC) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+ int ucc_num;
+ int protocol; /* QE_CR_PROTOCOL_xxx */
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ phys_addr_t regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ enum ucc_slow_transparent_tcrc tcrc;
+ enum ucc_slow_channel_protocol_mode mode;
+ enum ucc_slow_diag_mode diag;
+ enum ucc_slow_tx_oversampling_rate tdcr;
+ enum ucc_slow_rx_oversampling_rate rdcr;
+ enum ucc_slow_tx_encoding_method tenc;
+ enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+ struct ucc_slow_info *us_info;
+ struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
+ u32 us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame */
+ u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ struct qe_bd *confBd; /* next BD for confirm after Tx */
+ struct qe_bd *tx_bd; /* next BD for new Tx request */
+ struct qe_bd *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application) */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors) */
+#endif /* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
new file mode 100644
index 0000000..597783b
--- /dev/null
+++ b/include/soc/fsl/qman.h
@@ -0,0 +1,1197 @@
+/* Copyright 2008 - 2016 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_QMAN_H
+#define __FSL_QMAN_H
+
+#include <linux/bitops.h>
+
+/* Hardware constants */
+#define QM_CHANNEL_SWPORTAL0 0
+#define QMAN_CHANNEL_POOL1 0x21
+#define QMAN_CHANNEL_CAAM 0x80
+#define QMAN_CHANNEL_POOL1_REV3 0x401
+#define QMAN_CHANNEL_CAAM_REV3 0x840
+extern u16 qm_channel_pool1;
+extern u16 qm_channel_caam;
+
+/* Portal processing (interrupt) sources */
+#define QM_PIRQ_CSCI 0x00100000 /* Congestion State Change */
+#define QM_PIRQ_EQCI 0x00080000 /* Enqueue Command Committed */
+#define QM_PIRQ_EQRI 0x00040000 /* EQCR Ring (below threshold) */
+#define QM_PIRQ_DQRI 0x00020000 /* DQRR Ring (non-empty) */
+#define QM_PIRQ_MRI 0x00010000 /* MR Ring (non-empty) */
+/*
+ * This mask contains all the interrupt sources that need handling except DQRI,
+ * ie. that if present should trigger slow-path processing.
+ */
+#define QM_PIRQ_SLOW (QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \
+ QM_PIRQ_MRI)
+
+/* For qman_static_dequeue_*** APIs */
+#define QM_SDQCR_CHANNELS_POOL_MASK 0x00007fff
+/* for n in [1,15] */
+#define QM_SDQCR_CHANNELS_POOL(n) (0x00008000 >> (n))
+/* for conversion from n of qm_channel */
+static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel)
+{
+ return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1);
+}
+
+/* --- QMan data structures (and associated constants) --- */
+
+/* "Frame Descriptor (FD)" */
+struct qm_fd {
+ union {
+ struct {
+ u8 cfg8b_w1;
+ u8 bpid; /* Buffer Pool ID */
+ u8 cfg8b_w3;
+ u8 addr_hi; /* high 8-bits of 40-bit address */
+ __be32 addr_lo; /* low 32-bits of 40-bit address */
+ } __packed;
+ __be64 data;
+ };
+ __be32 cfg; /* format, offset, length / congestion */
+ union {
+ __be32 cmd;
+ __be32 status;
+ };
+} __aligned(8);
+
+#define QM_FD_FORMAT_SG BIT(31)
+#define QM_FD_FORMAT_LONG BIT(30)
+#define QM_FD_FORMAT_COMPOUND BIT(29)
+#define QM_FD_FORMAT_MASK GENMASK(31, 29)
+#define QM_FD_OFF_SHIFT 20
+#define QM_FD_OFF_MASK GENMASK(28, 20)
+#define QM_FD_LEN_MASK GENMASK(19, 0)
+#define QM_FD_LEN_BIG_MASK GENMASK(28, 0)
+
+enum qm_fd_format {
+ /*
+ * 'contig' implies a contiguous buffer, whereas 'sg' implies a
+ * scatter-gather table. 'big' implies a 29-bit length with no offset
+ * field, otherwise length is 20-bit and offset is 9-bit. 'compound'
+ * implies a s/g-like table, where each entry itself represents a frame
+ * (contiguous or scatter-gather) and the 29-bit "length" is
+ * interpreted purely for congestion calculations, ie. a "congestion
+ * weight".
+ */
+ qm_fd_contig = 0,
+ qm_fd_contig_big = QM_FD_FORMAT_LONG,
+ qm_fd_sg = QM_FD_FORMAT_SG,
+ qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG,
+ qm_fd_compound = QM_FD_FORMAT_COMPOUND
+};
+
+static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd)
+{
+ return be64_to_cpu(fd->data) & 0xffffffffffLLU;
+}
+
+static inline u64 qm_fd_addr_get64(const struct qm_fd *fd)
+{
+ return be64_to_cpu(fd->data) & 0xffffffffffLLU;
+}
+
+static inline void qm_fd_addr_set64(struct qm_fd *fd, u64 addr)
+{
+ fd->addr_hi = upper_32_bits(addr);
+ fd->addr_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+/*
+ * The 'format' field indicates the interpretation of the remaining
+ * 29 bits of the 32-bit word.
+ * If 'format' is _contig or _sg, 20b length and 9b offset.
+ * If 'format' is _contig_big or _sg_big, 29b length.
+ * If 'format' is _compound, 29b "congestion weight".
+ */
+static inline enum qm_fd_format qm_fd_get_format(const struct qm_fd *fd)
+{
+ return be32_to_cpu(fd->cfg) & QM_FD_FORMAT_MASK;
+}
+
+static inline int qm_fd_get_offset(const struct qm_fd *fd)
+{
+ return (be32_to_cpu(fd->cfg) & QM_FD_OFF_MASK) >> QM_FD_OFF_SHIFT;
+}
+
+static inline int qm_fd_get_length(const struct qm_fd *fd)
+{
+ return be32_to_cpu(fd->cfg) & QM_FD_LEN_MASK;
+}
+
+static inline int qm_fd_get_len_big(const struct qm_fd *fd)
+{
+ return be32_to_cpu(fd->cfg) & QM_FD_LEN_BIG_MASK;
+}
+
+static inline void qm_fd_set_param(struct qm_fd *fd, enum qm_fd_format fmt,
+ int off, int len)
+{
+ fd->cfg = cpu_to_be32(fmt | (len & QM_FD_LEN_BIG_MASK) |
+ ((off << QM_FD_OFF_SHIFT) & QM_FD_OFF_MASK));
+}
+
+#define qm_fd_set_contig(fd, off, len) \
+ qm_fd_set_param(fd, qm_fd_contig, off, len)
+#define qm_fd_set_sg(fd, off, len) qm_fd_set_param(fd, qm_fd_sg, off, len)
+#define qm_fd_set_contig_big(fd, len) \
+ qm_fd_set_param(fd, qm_fd_contig_big, 0, len)
+#define qm_fd_set_sg_big(fd, len) qm_fd_set_param(fd, qm_fd_sg_big, 0, len)
+#define qm_fd_set_compound(fd, len) qm_fd_set_param(fd, qm_fd_compound, 0, len)
+
+static inline void qm_fd_clear_fd(struct qm_fd *fd)
+{
+ fd->data = 0;
+ fd->cfg = 0;
+ fd->cmd = 0;
+}
+
+/* Scatter/Gather table entry */
+struct qm_sg_entry {
+ union {
+ struct {
+ u8 __reserved1[3];
+ u8 addr_hi; /* high 8-bits of 40-bit address */
+ __be32 addr_lo; /* low 32-bits of 40-bit address */
+ };
+ __be64 data;
+ };
+ __be32 cfg; /* E bit, F bit, length */
+ u8 __reserved2;
+ u8 bpid;
+ __be16 offset; /* 13-bit, _res[13-15]*/
+} __packed;
+
+#define QM_SG_LEN_MASK GENMASK(29, 0)
+#define QM_SG_OFF_MASK GENMASK(12, 0)
+#define QM_SG_FIN BIT(30)
+#define QM_SG_EXT BIT(31)
+
+static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg)
+{
+ return be64_to_cpu(sg->data) & 0xffffffffffLLU;
+}
+
+static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg)
+{
+ return be64_to_cpu(sg->data) & 0xffffffffffLLU;
+}
+
+static inline void qm_sg_entry_set64(struct qm_sg_entry *sg, u64 addr)
+{
+ sg->addr_hi = upper_32_bits(addr);
+ sg->addr_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline bool qm_sg_entry_is_final(const struct qm_sg_entry *sg)
+{
+ return be32_to_cpu(sg->cfg) & QM_SG_FIN;
+}
+
+static inline bool qm_sg_entry_is_ext(const struct qm_sg_entry *sg)
+{
+ return be32_to_cpu(sg->cfg) & QM_SG_EXT;
+}
+
+static inline int qm_sg_entry_get_len(const struct qm_sg_entry *sg)
+{
+ return be32_to_cpu(sg->cfg) & QM_SG_LEN_MASK;
+}
+
+static inline void qm_sg_entry_set_len(struct qm_sg_entry *sg, int len)
+{
+ sg->cfg = cpu_to_be32(len & QM_SG_LEN_MASK);
+}
+
+static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len)
+{
+ sg->cfg = cpu_to_be32(QM_SG_FIN | (len & QM_SG_LEN_MASK));
+}
+
+static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg)
+{
+ return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK;
+}
+
+/* "Frame Dequeue Response" */
+struct qm_dqrr_entry {
+ u8 verb;
+ u8 stat;
+ __be16 seqnum; /* 15-bit */
+ u8 tok;
+ u8 __reserved2[3];
+ __be32 fqid; /* 24-bit */
+ __be32 context_b;
+ struct qm_fd fd;
+ u8 __reserved4[32];
+} __packed;
+#define QM_DQRR_VERB_VBIT 0x80
+#define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */
+#define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */
+#define QM_DQRR_STAT_FQ_EMPTY 0x80 /* FQ empty */
+#define QM_DQRR_STAT_FQ_HELDACTIVE 0x40 /* FQ held active */
+#define QM_DQRR_STAT_FQ_FORCEELIGIBLE 0x20 /* FQ was force-eligible'd */
+#define QM_DQRR_STAT_FD_VALID 0x10 /* has a non-NULL FD */
+#define QM_DQRR_STAT_UNSCHEDULED 0x02 /* Unscheduled dequeue */
+#define QM_DQRR_STAT_DQCR_EXPIRED 0x01 /* VDQCR or PDQCR expired*/
+
+/* 'fqid' is a 24-bit field in every h/w descriptor */
+#define QM_FQID_MASK GENMASK(23, 0)
+#define qm_fqid_set(p, v) ((p)->fqid = cpu_to_be32((v) & QM_FQID_MASK))
+#define qm_fqid_get(p) (be32_to_cpu((p)->fqid) & QM_FQID_MASK)
+
+/* "ERN Message Response" */
+/* "FQ State Change Notification" */
+union qm_mr_entry {
+ struct {
+ u8 verb;
+ u8 __reserved[63];
+ };
+ struct {
+ u8 verb;
+ u8 dca;
+ __be16 seqnum;
+ u8 rc; /* Rej Code: 8-bit */
+ u8 __reserved[3];
+ __be32 fqid; /* 24-bit */
+ __be32 tag;
+ struct qm_fd fd;
+ u8 __reserved1[32];
+ } __packed ern;
+ struct {
+ u8 verb;
+ u8 fqs; /* Frame Queue Status */
+ u8 __reserved1[6];
+ __be32 fqid; /* 24-bit */
+ __be32 context_b;
+ u8 __reserved2[48];
+ } __packed fq; /* FQRN/FQRNI/FQRL/FQPN */
+};
+#define QM_MR_VERB_VBIT 0x80
+/*
+ * ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb
+ * which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished
+ * from the other MR types by noting if the 0x20 bit is unset.
+ */
+#define QM_MR_VERB_TYPE_MASK 0x27
+#define QM_MR_VERB_DC_ERN 0x20
+#define QM_MR_VERB_FQRN 0x21
+#define QM_MR_VERB_FQRNI 0x22
+#define QM_MR_VERB_FQRL 0x23
+#define QM_MR_VERB_FQPN 0x24
+#define QM_MR_RC_MASK 0xf0 /* contains one of; */
+#define QM_MR_RC_CGR_TAILDROP 0x00
+#define QM_MR_RC_WRED 0x10
+#define QM_MR_RC_ERROR 0x20
+#define QM_MR_RC_ORPWINDOW_EARLY 0x30
+#define QM_MR_RC_ORPWINDOW_LATE 0x40
+#define QM_MR_RC_FQ_TAILDROP 0x50
+#define QM_MR_RC_ORPWINDOW_RETIRED 0x60
+#define QM_MR_RC_ORP_ZERO 0x70
+#define QM_MR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */
+#define QM_MR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */
+
+/*
+ * An identical structure of FQD fields is present in the "Init FQ" command and
+ * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type.
+ * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the
+ * latter has two inlines to assist with converting to/from the mant+exp
+ * representation.
+ */
+struct qm_fqd_stashing {
+ /* See QM_STASHING_EXCL_<...> */
+ u8 exclusive;
+ /* Numbers of cachelines */
+ u8 cl; /* _res[6-7], as[4-5], ds[2-3], cs[0-1] */
+};
+
+struct qm_fqd_oac {
+ /* "Overhead Accounting Control", see QM_OAC_<...> */
+ u8 oac; /* oac[6-7], _res[0-5] */
+ /* Two's-complement value (-128 to +127) */
+ s8 oal; /* "Overhead Accounting Length" */
+};
+
+struct qm_fqd {
+ /* _res[6-7], orprws[3-5], oa[2], olws[0-1] */
+ u8 orpc;
+ u8 cgid;
+ __be16 fq_ctrl; /* See QM_FQCTRL_<...> */
+ __be16 dest_wq; /* channel[3-15], wq[0-2] */
+ __be16 ics_cred; /* 15-bit */
+ /*
+ * For "Initialize Frame Queue" commands, the write-enable mask
+ * determines whether 'td' or 'oac_init' is observed. For query
+ * commands, this field is always 'td', and 'oac_query' (below) reflects
+ * the Overhead ACcounting values.
+ */
+ union {
+ __be16 td; /* "Taildrop": _res[13-15], mant[5-12], exp[0-4] */
+ struct qm_fqd_oac oac_init;
+ };
+ __be32 context_b;
+ union {
+ /* Treat it as 64-bit opaque */
+ __be64 opaque;
+ struct {
+ __be32 hi;
+ __be32 lo;
+ };
+ /* Treat it as s/w portal stashing config */
+ /* see "FQD Context_A field used for [...]" */
+ struct {
+ struct qm_fqd_stashing stashing;
+ /*
+ * 48-bit address of FQ context to
+ * stash, must be cacheline-aligned
+ */
+ __be16 context_hi;
+ __be32 context_lo;
+ } __packed;
+ } context_a;
+ struct qm_fqd_oac oac_query;
+} __packed;
+
+#define QM_FQD_CHAN_OFF 3
+#define QM_FQD_WQ_MASK GENMASK(2, 0)
+#define QM_FQD_TD_EXP_MASK GENMASK(4, 0)
+#define QM_FQD_TD_MANT_OFF 5
+#define QM_FQD_TD_MANT_MASK GENMASK(12, 5)
+#define QM_FQD_TD_MAX 0xe0000000
+#define QM_FQD_TD_MANT_MAX 0xff
+#define QM_FQD_OAC_OFF 6
+#define QM_FQD_AS_OFF 4
+#define QM_FQD_DS_OFF 2
+#define QM_FQD_XS_MASK 0x3
+
+/* 64-bit converters for context_hi/lo */
+static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd)
+{
+ return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL;
+}
+
+static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd)
+{
+ return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL;
+}
+
+static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd)
+{
+ return qm_fqd_stashing_get64(fqd);
+}
+
+static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr)
+{
+ fqd->context_a.context_hi = cpu_to_be16(upper_32_bits(addr));
+ fqd->context_a.context_lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr)
+{
+ fqd->context_a.hi = cpu_to_be32(upper_32_bits(addr));
+ fqd->context_a.lo = cpu_to_be32(lower_32_bits(addr));
+}
+
+/* convert a threshold value into mant+exp representation */
+static inline int qm_fqd_set_taildrop(struct qm_fqd *fqd, u32 val,
+ int roundup)
+{
+ u32 e = 0;
+ int td, oddbit = 0;
+
+ if (val > QM_FQD_TD_MAX)
+ return -ERANGE;
+
+ while (val > QM_FQD_TD_MANT_MAX) {
+ oddbit = val & 1;
+ val >>= 1;
+ e++;
+ if (roundup && oddbit)
+ val++;
+ }
+
+ td = (val << QM_FQD_TD_MANT_OFF) & QM_FQD_TD_MANT_MASK;
+ td |= (e & QM_FQD_TD_EXP_MASK);
+ fqd->td = cpu_to_be16(td);
+ return 0;
+}
+/* and the other direction */
+static inline int qm_fqd_get_taildrop(const struct qm_fqd *fqd)
+{
+ int td = be16_to_cpu(fqd->td);
+
+ return ((td & QM_FQD_TD_MANT_MASK) >> QM_FQD_TD_MANT_OFF)
+ << (td & QM_FQD_TD_EXP_MASK);
+}
+
+static inline void qm_fqd_set_stashing(struct qm_fqd *fqd, u8 as, u8 ds, u8 cs)
+{
+ struct qm_fqd_stashing *st = &fqd->context_a.stashing;
+
+ st->cl = ((as & QM_FQD_XS_MASK) << QM_FQD_AS_OFF) |
+ ((ds & QM_FQD_XS_MASK) << QM_FQD_DS_OFF) |
+ (cs & QM_FQD_XS_MASK);
+}
+
+static inline u8 qm_fqd_get_stashing(const struct qm_fqd *fqd)
+{
+ return fqd->context_a.stashing.cl;
+}
+
+static inline void qm_fqd_set_oac(struct qm_fqd *fqd, u8 val)
+{
+ fqd->oac_init.oac = val << QM_FQD_OAC_OFF;
+}
+
+static inline void qm_fqd_set_oal(struct qm_fqd *fqd, s8 val)
+{
+ fqd->oac_init.oal = val;
+}
+
+static inline void qm_fqd_set_destwq(struct qm_fqd *fqd, int ch, int wq)
+{
+ fqd->dest_wq = cpu_to_be16((ch << QM_FQD_CHAN_OFF) |
+ (wq & QM_FQD_WQ_MASK));
+}
+
+static inline int qm_fqd_get_chan(const struct qm_fqd *fqd)
+{
+ return be16_to_cpu(fqd->dest_wq) >> QM_FQD_CHAN_OFF;
+}
+
+static inline int qm_fqd_get_wq(const struct qm_fqd *fqd)
+{
+ return be16_to_cpu(fqd->dest_wq) & QM_FQD_WQ_MASK;
+}
+
+/* See "Frame Queue Descriptor (FQD)" */
+/* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */
+#define QM_FQCTRL_MASK 0x07ff /* 'fq_ctrl' flags; */
+#define QM_FQCTRL_CGE 0x0400 /* Congestion Group Enable */
+#define QM_FQCTRL_TDE 0x0200 /* Tail-Drop Enable */
+#define QM_FQCTRL_CTXASTASHING 0x0080 /* Context-A stashing */
+#define QM_FQCTRL_CPCSTASH 0x0040 /* CPC Stash Enable */
+#define QM_FQCTRL_FORCESFDR 0x0008 /* High-priority SFDRs */
+#define QM_FQCTRL_AVOIDBLOCK 0x0004 /* Don't block active */
+#define QM_FQCTRL_HOLDACTIVE 0x0002 /* Hold active in portal */
+#define QM_FQCTRL_PREFERINCACHE 0x0001 /* Aggressively cache FQD */
+#define QM_FQCTRL_LOCKINCACHE QM_FQCTRL_PREFERINCACHE /* older naming */
+
+/* See "FQD Context_A field used for [...] */
+/* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */
+#define QM_STASHING_EXCL_ANNOTATION 0x04
+#define QM_STASHING_EXCL_DATA 0x02
+#define QM_STASHING_EXCL_CTX 0x01
+
+/* See "Intra Class Scheduling" */
+/* FQD field 'OAC' (Overhead ACcounting) uses these constants */
+#define QM_OAC_ICS 0x2 /* Accounting for Intra-Class Scheduling */
+#define QM_OAC_CG 0x1 /* Accounting for Congestion Groups */
+
+/*
+ * This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields
+ * and associated commands/responses. The WRED parameters are calculated from
+ * these fields as follows;
+ * MaxTH = MA * (2 ^ Mn)
+ * Slope = SA / (2 ^ Sn)
+ * MaxP = 4 * (Pn + 1)
+ */
+struct qm_cgr_wr_parm {
+ /* MA[24-31], Mn[19-23], SA[12-18], Sn[6-11], Pn[0-5] */
+ __be32 word;
+};
+/*
+ * This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding
+ * management commands, this is padded to a 16-bit structure field, so that's
+ * how we represent it here. The congestion state threshold is calculated from
+ * these fields as follows;
+ * CS threshold = TA * (2 ^ Tn)
+ */
+struct qm_cgr_cs_thres {
+ /* _res[13-15], TA[5-12], Tn[0-4] */
+ __be16 word;
+};
+/*
+ * This identical structure of CGR fields is present in the "Init/Modify CGR"
+ * commands and the "Query CGR" result. It's suctioned out here into its own
+ * struct.
+ */
+struct __qm_mc_cgr {
+ struct qm_cgr_wr_parm wr_parm_g;
+ struct qm_cgr_wr_parm wr_parm_y;
+ struct qm_cgr_wr_parm wr_parm_r;
+ u8 wr_en_g; /* boolean, use QM_CGR_EN */
+ u8 wr_en_y; /* boolean, use QM_CGR_EN */
+ u8 wr_en_r; /* boolean, use QM_CGR_EN */
+ u8 cscn_en; /* boolean, use QM_CGR_EN */
+ union {
+ struct {
+ __be16 cscn_targ_upd_ctrl; /* use QM_CGR_TARG_UDP_* */
+ __be16 cscn_targ_dcp_low;
+ };
+ __be32 cscn_targ; /* use QM_CGR_TARG_* */
+ };
+ u8 cstd_en; /* boolean, use QM_CGR_EN */
+ u8 cs; /* boolean, only used in query response */
+ struct qm_cgr_cs_thres cs_thres; /* use qm_cgr_cs_thres_set64() */
+ u8 mode; /* QMAN_CGR_MODE_FRAME not supported in rev1.0 */
+} __packed;
+#define QM_CGR_EN 0x01 /* For wr_en_*, cscn_en, cstd_en */
+#define QM_CGR_TARG_UDP_CTRL_WRITE_BIT 0x8000 /* value written to portal bit*/
+#define QM_CGR_TARG_UDP_CTRL_DCP 0x4000 /* 0: SWP, 1: DCP */
+#define QM_CGR_TARG_PORTAL(n) (0x80000000 >> (n)) /* s/w portal, 0-9 */
+#define QM_CGR_TARG_FMAN0 0x00200000 /* direct-connect portal: fman0 */
+#define QM_CGR_TARG_FMAN1 0x00100000 /* : fman1 */
+/* Convert CGR thresholds to/from "cs_thres" format */
+static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th)
+{
+ int thres = be16_to_cpu(th->word);
+
+ return ((thres >> 5) & 0xff) << (thres & 0x1f);
+}
+
+static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val,
+ int roundup)
+{
+ u32 e = 0;
+ int oddbit = 0;
+
+ while (val > 0xff) {
+ oddbit = val & 1;
+ val >>= 1;
+ e++;
+ if (roundup && oddbit)
+ val++;
+ }
+ th->word = cpu_to_be16(((val & 0xff) << 5) | (e & 0x1f));
+ return 0;
+}
+
+/* "Initialize FQ" */
+struct qm_mcc_initfq {
+ u8 __reserved1[2];
+ __be16 we_mask; /* Write Enable Mask */
+ __be32 fqid; /* 24-bit */
+ __be16 count; /* Initialises 'count+1' FQDs */
+ struct qm_fqd fqd; /* the FQD fields go here */
+ u8 __reserved2[30];
+} __packed;
+/* "Initialize/Modify CGR" */
+struct qm_mcc_initcgr {
+ u8 __reserve1[2];
+ __be16 we_mask; /* Write Enable Mask */
+ struct __qm_mc_cgr cgr; /* CGR fields */
+ u8 __reserved2[2];
+ u8 cgid;
+ u8 __reserved3[32];
+} __packed;
+
+/* INITFQ-specific flags */
+#define QM_INITFQ_WE_MASK 0x01ff /* 'Write Enable' flags; */
+#define QM_INITFQ_WE_OAC 0x0100
+#define QM_INITFQ_WE_ORPC 0x0080
+#define QM_INITFQ_WE_CGID 0x0040
+#define QM_INITFQ_WE_FQCTRL 0x0020
+#define QM_INITFQ_WE_DESTWQ 0x0010
+#define QM_INITFQ_WE_ICSCRED 0x0008
+#define QM_INITFQ_WE_TDTHRESH 0x0004
+#define QM_INITFQ_WE_CONTEXTB 0x0002
+#define QM_INITFQ_WE_CONTEXTA 0x0001
+/* INITCGR/MODIFYCGR-specific flags */
+#define QM_CGR_WE_MASK 0x07ff /* 'Write Enable Mask'; */
+#define QM_CGR_WE_WR_PARM_G 0x0400
+#define QM_CGR_WE_WR_PARM_Y 0x0200
+#define QM_CGR_WE_WR_PARM_R 0x0100
+#define QM_CGR_WE_WR_EN_G 0x0080
+#define QM_CGR_WE_WR_EN_Y 0x0040
+#define QM_CGR_WE_WR_EN_R 0x0020
+#define QM_CGR_WE_CSCN_EN 0x0010
+#define QM_CGR_WE_CSCN_TARG 0x0008
+#define QM_CGR_WE_CSTD_EN 0x0004
+#define QM_CGR_WE_CS_THRES 0x0002
+#define QM_CGR_WE_MODE 0x0001
+
+#define QMAN_CGR_FLAG_USE_INIT 0x00000001
+#define QMAN_CGR_MODE_FRAME 0x00000001
+
+ /* Portal and Frame Queues */
+/* Represents a managed portal */
+struct qman_portal;
+
+/*
+ * This object type represents QMan frame queue descriptors (FQD), it is
+ * cacheline-aligned, and initialised by qman_create_fq(). The structure is
+ * defined further down.
+ */
+struct qman_fq;
+
+/*
+ * This object type represents a QMan congestion group, it is defined further
+ * down.
+ */
+struct qman_cgr;
+
+/*
+ * This enum, and the callback type that returns it, are used when handling
+ * dequeued frames via DQRR. Note that for "null" callbacks registered with the
+ * portal object (for handling dequeues that do not demux because context_b is
+ * NULL), the return value *MUST* be qman_cb_dqrr_consume.
+ */
+enum qman_cb_dqrr_result {
+ /* DQRR entry can be consumed */
+ qman_cb_dqrr_consume,
+ /* Like _consume, but requests parking - FQ must be held-active */
+ qman_cb_dqrr_park,
+ /* Does not consume, for DCA mode only. */
+ qman_cb_dqrr_defer,
+ /*
+ * Stop processing without consuming this ring entry. Exits the current
+ * qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within
+ * an interrupt handler, the callback would typically call
+ * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value,
+ * otherwise the interrupt will reassert immediately.
+ */
+ qman_cb_dqrr_stop,
+ /* Like qman_cb_dqrr_stop, but consumes the current entry. */
+ qman_cb_dqrr_consume_stop
+};
+typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dqrr);
+
+/*
+ * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They
+ * are always consumed after the callback returns.
+ */
+typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq,
+ const union qm_mr_entry *msg);
+
+/*
+ * s/w-visible states. Ie. tentatively scheduled + truly scheduled + active +
+ * held-active + held-suspended are just "sched". Things like "retired" will not
+ * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until
+ * then, to indicate it's completing and to gate attempts to retry the retire
+ * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's
+ * technically impossible in the case of enqueue DCAs (which refer to DQRR ring
+ * index rather than the FQ that ring entry corresponds to), so repeated park
+ * commands are allowed (if you're silly enough to try) but won't change FQ
+ * state, and the resulting park notifications move FQs from "sched" to
+ * "parked".
+ */
+enum qman_fq_state {
+ qman_fq_state_oos,
+ qman_fq_state_parked,
+ qman_fq_state_sched,
+ qman_fq_state_retired
+};
+
+#define QMAN_FQ_STATE_CHANGING 0x80000000 /* 'state' is changing */
+#define QMAN_FQ_STATE_NE 0x40000000 /* retired FQ isn't empty */
+#define QMAN_FQ_STATE_ORL 0x20000000 /* retired FQ has ORL */
+#define QMAN_FQ_STATE_BLOCKOOS 0xe0000000 /* if any are set, no OOS */
+#define QMAN_FQ_STATE_CGR_EN 0x10000000 /* CGR enabled */
+#define QMAN_FQ_STATE_VDQCR 0x08000000 /* being volatile dequeued */
+
+/*
+ * Frame queue objects (struct qman_fq) are stored within memory passed to
+ * qman_create_fq(), as this allows stashing of caller-provided demux callback
+ * pointers at no extra cost to stashing of (driver-internal) FQ state. If the
+ * caller wishes to add per-FQ state and have it benefit from dequeue-stashing,
+ * they should;
+ *
+ * (a) extend the qman_fq structure with their state; eg.
+ *
+ * // myfq is allocated and driver_fq callbacks filled in;
+ * struct my_fq {
+ * struct qman_fq base;
+ * int an_extra_field;
+ * [ ... add other fields to be associated with each FQ ...]
+ * } *myfq = some_my_fq_allocator();
+ * struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base);
+ *
+ * // in a dequeue callback, access extra fields from 'fq' via a cast;
+ * struct my_fq *myfq = (struct my_fq *)fq;
+ * do_something_with(myfq->an_extra_field);
+ * [...]
+ *
+ * (b) when and if configuring the FQ for context stashing, specify how ever
+ * many cachelines are required to stash 'struct my_fq', to accelerate not
+ * only the QMan driver but the callback as well.
+ */
+
+struct qman_fq_cb {
+ qman_cb_dqrr dqrr; /* for dequeued frames */
+ qman_cb_mr ern; /* for s/w ERNs */
+ qman_cb_mr fqs; /* frame-queue state changes*/
+};
+
+struct qman_fq {
+ /* Caller of qman_create_fq() provides these demux callbacks */
+ struct qman_fq_cb cb;
+ /*
+ * These are internal to the driver, don't touch. In particular, they
+ * may change, be removed, or extended (so you shouldn't rely on
+ * sizeof(qman_fq) being a constant).
+ */
+ u32 fqid, idx;
+ unsigned long flags;
+ enum qman_fq_state state;
+ int cgr_groupid;
+};
+
+/*
+ * This callback type is used when handling congestion group entry/exit.
+ * 'congested' is non-zero on congestion-entry, and zero on congestion-exit.
+ */
+typedef void (*qman_cb_cgr)(struct qman_portal *qm,
+ struct qman_cgr *cgr, int congested);
+
+struct qman_cgr {
+ /* Set these prior to qman_create_cgr() */
+ u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/
+ qman_cb_cgr cb;
+ /* These are private to the driver */
+ u16 chan; /* portal channel this object is created on */
+ struct list_head node;
+};
+
+/* Flags to qman_create_fq() */
+#define QMAN_FQ_FLAG_NO_ENQUEUE 0x00000001 /* can't enqueue */
+#define QMAN_FQ_FLAG_NO_MODIFY 0x00000002 /* can only enqueue */
+#define QMAN_FQ_FLAG_TO_DCPORTAL 0x00000004 /* consumed by CAAM/PME/Fman */
+#define QMAN_FQ_FLAG_DYNAMIC_FQID 0x00000020 /* (de)allocate fqid */
+
+/* Flags to qman_init_fq() */
+#define QMAN_INITFQ_FLAG_SCHED 0x00000001 /* schedule rather than park */
+#define QMAN_INITFQ_FLAG_LOCAL 0x00000004 /* set dest portal */
+
+/*
+ * For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use
+ * NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use
+ * FQID(n) to fill in the frame queue ID.
+ */
+#define QM_VDQCR_PRECEDENCE_VDQCR 0x0
+#define QM_VDQCR_PRECEDENCE_SDQCR 0x80000000
+#define QM_VDQCR_EXACT 0x40000000
+#define QM_VDQCR_NUMFRAMES_MASK 0x3f000000
+#define QM_VDQCR_NUMFRAMES_SET(n) (((n) & 0x3f) << 24)
+#define QM_VDQCR_NUMFRAMES_GET(n) (((n) >> 24) & 0x3f)
+#define QM_VDQCR_NUMFRAMES_TILLEMPTY QM_VDQCR_NUMFRAMES_SET(0)
+
+#define QMAN_VOLATILE_FLAG_WAIT 0x00000001 /* wait if VDQCR is in use */
+#define QMAN_VOLATILE_FLAG_WAIT_INT 0x00000002 /* if wait, interruptible? */
+#define QMAN_VOLATILE_FLAG_FINISH 0x00000004 /* wait till VDQCR completes */
+
+/* "Query FQ Non-Programmable Fields" */
+struct qm_mcr_queryfq_np {
+ u8 verb;
+ u8 result;
+ u8 __reserved1;
+ u8 state; /* QM_MCR_NP_STATE_*** */
+ u32 fqd_link; /* 24-bit, _res2[24-31] */
+ u16 odp_seq; /* 14-bit, _res3[14-15] */
+ u16 orp_nesn; /* 14-bit, _res4[14-15] */
+ u16 orp_ea_hseq; /* 15-bit, _res5[15] */
+ u16 orp_ea_tseq; /* 15-bit, _res6[15] */
+ u32 orp_ea_hptr; /* 24-bit, _res7[24-31] */
+ u32 orp_ea_tptr; /* 24-bit, _res8[24-31] */
+ u32 pfdr_hptr; /* 24-bit, _res9[24-31] */
+ u32 pfdr_tptr; /* 24-bit, _res10[24-31] */
+ u8 __reserved2[5];
+ u8 is; /* 1-bit, _res12[1-7] */
+ u16 ics_surp;
+ u32 byte_cnt;
+ u32 frm_cnt; /* 24-bit, _res13[24-31] */
+ u32 __reserved3;
+ u16 ra1_sfdr; /* QM_MCR_NP_RA1_*** */
+ u16 ra2_sfdr; /* QM_MCR_NP_RA2_*** */
+ u16 __reserved4;
+ u16 od1_sfdr; /* QM_MCR_NP_OD1_*** */
+ u16 od2_sfdr; /* QM_MCR_NP_OD2_*** */
+ u16 od3_sfdr; /* QM_MCR_NP_OD3_*** */
+} __packed;
+
+#define QM_MCR_NP_STATE_FE 0x10
+#define QM_MCR_NP_STATE_R 0x08
+#define QM_MCR_NP_STATE_MASK 0x07 /* Reads FQD::STATE; */
+#define QM_MCR_NP_STATE_OOS 0x00
+#define QM_MCR_NP_STATE_RETIRED 0x01
+#define QM_MCR_NP_STATE_TEN_SCHED 0x02
+#define QM_MCR_NP_STATE_TRU_SCHED 0x03
+#define QM_MCR_NP_STATE_PARKED 0x04
+#define QM_MCR_NP_STATE_ACTIVE 0x05
+#define QM_MCR_NP_PTR_MASK 0x07ff /* for RA[12] & OD[123] */
+#define QM_MCR_NP_RA1_NRA(v) (((v) >> 14) & 0x3) /* FQD::NRA */
+#define QM_MCR_NP_RA2_IT(v) (((v) >> 14) & 0x1) /* FQD::IT */
+#define QM_MCR_NP_OD1_NOD(v) (((v) >> 14) & 0x3) /* FQD::NOD */
+#define QM_MCR_NP_OD3_NPC(v) (((v) >> 14) & 0x3) /* FQD::NPC */
+
+enum qm_mcr_queryfq_np_masks {
+ qm_mcr_fqd_link_mask = BIT(24) - 1,
+ qm_mcr_odp_seq_mask = BIT(14) - 1,
+ qm_mcr_orp_nesn_mask = BIT(14) - 1,
+ qm_mcr_orp_ea_hseq_mask = BIT(15) - 1,
+ qm_mcr_orp_ea_tseq_mask = BIT(15) - 1,
+ qm_mcr_orp_ea_hptr_mask = BIT(24) - 1,
+ qm_mcr_orp_ea_tptr_mask = BIT(24) - 1,
+ qm_mcr_pfdr_hptr_mask = BIT(24) - 1,
+ qm_mcr_pfdr_tptr_mask = BIT(24) - 1,
+ qm_mcr_is_mask = BIT(1) - 1,
+ qm_mcr_frm_cnt_mask = BIT(24) - 1,
+};
+
+#define qm_mcr_np_get(np, field) \
+ ((np)->field & (qm_mcr_##field##_mask))
+
+ /* Portal Management */
+/**
+ * qman_p_irqsource_add - add processing sources to be interrupt-driven
+ * @bits: bitmask of QM_PIRQ_**I processing sources
+ *
+ * Adds processing sources that should be interrupt-driven (rather than
+ * processed via qman_poll_***() functions).
+ */
+void qman_p_irqsource_add(struct qman_portal *p, u32 bits);
+
+/**
+ * qman_p_irqsource_remove - remove processing sources from being int-driven
+ * @bits: bitmask of QM_PIRQ_**I processing sources
+ *
+ * Removes processing sources from being interrupt-driven, so that they will
+ * instead be processed via qman_poll_***() functions.
+ */
+void qman_p_irqsource_remove(struct qman_portal *p, u32 bits);
+
+/**
+ * qman_affine_cpus - return a mask of cpus that have affine portals
+ */
+const cpumask_t *qman_affine_cpus(void);
+
+/**
+ * qman_affine_channel - return the channel ID of an portal
+ * @cpu: the cpu whose affine portal is the subject of the query
+ *
+ * If @cpu is -1, the affine portal for the current CPU will be used. It is a
+ * bug to call this function for any value of @cpu (other than -1) that is not a
+ * member of the mask returned from qman_affine_cpus().
+ */
+u16 qman_affine_channel(int cpu);
+
+/**
+ * qman_get_affine_portal - return the portal pointer affine to cpu
+ * @cpu: the cpu whose affine portal is the subject of the query
+ */
+struct qman_portal *qman_get_affine_portal(int cpu);
+
+/**
+ * qman_p_poll_dqrr - process DQRR (fast-path) entries
+ * @limit: the maximum number of DQRR entries to process
+ *
+ * Use of this function requires that DQRR processing not be interrupt-driven.
+ * The return value represents the number of DQRR entries processed.
+ */
+int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit);
+
+/**
+ * qman_p_static_dequeue_add - Add pool channels to the portal SDQCR
+ * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n)
+ *
+ * Adds a set of pool channels to the portal's static dequeue command register
+ * (SDQCR). The requested pools are limited to those the portal has dequeue
+ * access to.
+ */
+void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools);
+
+ /* FQ management */
+/**
+ * qman_create_fq - Allocates a FQ
+ * @fqid: the index of the FQD to encapsulate, must be "Out of Service"
+ * @flags: bit-mask of QMAN_FQ_FLAG_*** options
+ * @fq: memory for storing the 'fq', with callbacks filled in
+ *
+ * Creates a frame queue object for the given @fqid, unless the
+ * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is
+ * dynamically allocated (or the function fails if none are available). Once
+ * created, the caller should not touch the memory at 'fq' except as extended to
+ * adjacent memory for user-defined fields (see the definition of "struct
+ * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to
+ * pre-existing frame-queues that aren't to be otherwise interfered with, it
+ * prevents all other modifications to the frame queue. The TO_DCPORTAL flag
+ * causes the driver to honour any context_b modifications requested in the
+ * qm_init_fq() API, as this indicates the frame queue will be consumed by a
+ * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by
+ * software portals, the context_b field is controlled by the driver and can't
+ * be modified by the caller.
+ */
+int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq);
+
+/**
+ * qman_destroy_fq - Deallocates a FQ
+ * @fq: the frame queue object to release
+ *
+ * The memory for this frame queue object ('fq' provided in qman_create_fq()) is
+ * not deallocated but the caller regains ownership, to do with as desired. The
+ * FQ must be in the 'out-of-service' or in the 'parked' state.
+ */
+void qman_destroy_fq(struct qman_fq *fq);
+
+/**
+ * qman_fq_fqid - Queries the frame queue ID of a FQ object
+ * @fq: the frame queue object to query
+ */
+u32 qman_fq_fqid(struct qman_fq *fq);
+
+/**
+ * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled"
+ * @fq: the frame queue object to modify, must be 'parked' or new.
+ * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options
+ * @opts: the FQ-modification settings, as defined in the low-level API
+ *
+ * The @opts parameter comes from the low-level portal API. Select
+ * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled
+ * rather than parked. NB, @opts can be NULL.
+ *
+ * Note that some fields and options within @opts may be ignored or overwritten
+ * by the driver;
+ * 1. the 'count' and 'fqid' fields are always ignored (this operation only
+ * affects one frame queue: @fq).
+ * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated
+ * 'fqd' structure's 'context_b' field are sometimes overwritten;
+ * - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is
+ * initialised to a value used by the driver for demux.
+ * - if context_b is initialised for demux, so is context_a in case stashing
+ * is requested (see item 4).
+ * (So caller control of context_b is only possible for TO_DCPORTAL frame queue
+ * objects.)
+ * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's
+ * 'dest::channel' field will be overwritten to match the portal used to issue
+ * the command. If the WE_DESTWQ write-enable bit had already been set by the
+ * caller, the channel workqueue will be left as-is, otherwise the write-enable
+ * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag
+ * isn't set, the destination channel/workqueue fields and the write-enable bit
+ * are left as-is.
+ * 4. if the driver overwrites context_a/b for demux, then if
+ * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite
+ * context_a.address fields and will leave the stashing fields provided by the
+ * user alone, otherwise it will zero out the context_a.stashing fields.
+ */
+int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts);
+
+/**
+ * qman_schedule_fq - Schedules a FQ
+ * @fq: the frame queue object to schedule, must be 'parked'
+ *
+ * Schedules the frame queue, which must be Parked, which takes it to
+ * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level.
+ */
+int qman_schedule_fq(struct qman_fq *fq);
+
+/**
+ * qman_retire_fq - Retires a FQ
+ * @fq: the frame queue object to retire
+ * @flags: FQ flags (QMAN_FQ_STATE*) if retirement completes immediately
+ *
+ * Retires the frame queue. This returns zero if it succeeds immediately, +1 if
+ * the retirement was started asynchronously, otherwise it returns negative for
+ * failure. When this function returns zero, @flags is set to indicate whether
+ * the retired FQ is empty and/or whether it has any ORL fragments (to show up
+ * as ERNs). Otherwise the corresponding flags will be known when a subsequent
+ * FQRN message shows up on the portal's message ring.
+ *
+ * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or
+ * Active state), the completion will be via the message ring as a FQRN - but
+ * the corresponding callback may occur before this function returns!! Ie. the
+ * caller should be prepared to accept the callback as the function is called,
+ * not only once it has returned.
+ */
+int qman_retire_fq(struct qman_fq *fq, u32 *flags);
+
+/**
+ * qman_oos_fq - Puts a FQ "out of service"
+ * @fq: the frame queue object to be put out-of-service, must be 'retired'
+ *
+ * The frame queue must be retired and empty, and if any order restoration list
+ * was released as ERNs at the time of retirement, they must all be consumed.
+ */
+int qman_oos_fq(struct qman_fq *fq);
+
+/*
+ * qman_volatile_dequeue - Issue a volatile dequeue command
+ * @fq: the frame queue object to dequeue from
+ * @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options
+ * @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set()
+ *
+ * Attempts to lock access to the portal's VDQCR volatile dequeue functionality.
+ * The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and
+ * the VDQCR is already in use, otherwise returns non-zero for failure. If
+ * QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once
+ * the VDQCR command has finished executing (ie. once the callback for the last
+ * DQRR entry resulting from the VDQCR command has been called). If not using
+ * the FINISH flag, completion can be determined either by detecting the
+ * presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits
+ * in the "stat" parameter passed to the FQ's dequeue callback, or by waiting
+ * for the QMAN_FQ_STATE_VDQCR bit to disappear.
+ */
+int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr);
+
+/**
+ * qman_enqueue - Enqueue a frame to a frame queue
+ * @fq: the frame queue object to enqueue to
+ * @fd: a descriptor of the frame to be enqueued
+ *
+ * Fills an entry in the EQCR of portal @qm to enqueue the frame described by
+ * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid'
+ * field is ignored. The return value is non-zero on error, such as ring full.
+ */
+int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd);
+
+/**
+ * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs
+ * @result: is set by the API to the base FQID of the allocated range
+ * @count: the number of FQIDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_fqid_range(u32 *result, u32 count);
+#define qman_alloc_fqid(result) qman_alloc_fqid_range(result, 1)
+
+/**
+ * qman_release_fqid - Release the specified frame queue ID
+ * @fqid: the FQID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * FQID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_fqid(u32 fqid);
+
+/**
+ * qman_query_fq_np - Queries non-programmable FQD fields
+ * @fq: the frame queue object to be queried
+ * @np: storage for the queried FQD fields
+ */
+int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np);
+
+ /* Pool-channel management */
+/**
+ * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs
+ * @result: is set by the API to the base pool-channel ID of the allocated range
+ * @count: the number of pool-channel IDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_pool_range(u32 *result, u32 count);
+#define qman_alloc_pool(result) qman_alloc_pool_range(result, 1)
+
+/**
+ * qman_release_pool - Release the specified pool-channel ID
+ * @id: the pool-chan ID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * pool-channel ID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_pool(u32 id);
+
+ /* CGR management */
+/**
+ * qman_create_cgr - Register a congestion group object
+ * @cgr: the 'cgr' object, with fields filled in
+ * @flags: QMAN_CGR_FLAG_* values
+ * @opts: optional state of CGR settings
+ *
+ * Registers this object to receiving congestion entry/exit callbacks on the
+ * portal affine to the cpu portal on which this API is executed. If opts is
+ * NULL then only the callback (cgr->cb) function is registered. If @flags
+ * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset
+ * any unspecified parameters) will be used rather than a modify hw hardware
+ * (which only modifies the specified parameters).
+ */
+int qman_create_cgr(struct qman_cgr *cgr, u32 flags,
+ struct qm_mcc_initcgr *opts);
+
+/**
+ * qman_delete_cgr - Deregisters a congestion group object
+ * @cgr: the 'cgr' object to deregister
+ *
+ * "Unplugs" this CGR object from the portal affine to the cpu on which this API
+ * is executed. This must be excuted on the same affine portal on which it was
+ * created.
+ */
+int qman_delete_cgr(struct qman_cgr *cgr);
+
+/**
+ * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU
+ * @cgr: the 'cgr' object to deregister
+ *
+ * This will select the proper CPU and run there qman_delete_cgr().
+ */
+void qman_delete_cgr_safe(struct qman_cgr *cgr);
+
+/**
+ * qman_query_cgr_congested - Queries CGR's congestion status
+ * @cgr: the 'cgr' object to query
+ * @result: returns 'cgr's congestion status, 1 (true) if congested
+ */
+int qman_query_cgr_congested(struct qman_cgr *cgr, bool *result);
+
+/**
+ * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs
+ * @result: is set by the API to the base CGR ID of the allocated range
+ * @count: the number of CGR IDs required
+ *
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_alloc_cgrid_range(u32 *result, u32 count);
+#define qman_alloc_cgrid(result) qman_alloc_cgrid_range(result, 1)
+
+/**
+ * qman_release_cgrid - Release the specified CGR ID
+ * @id: the CGR ID to be released back to the resource pool
+ *
+ * This function can also be used to seed the allocator with
+ * CGR ID ranges that it can subsequently allocate from.
+ * Returns 0 on success, or a negative error code.
+ */
+int qman_release_cgrid(u32 id);
+
+/**
+ * qman_is_probed - Check if qman is probed
+ *
+ * Returns 1 if the qman driver successfully probed, -1 if the qman driver
+ * failed to probe or 0 if the qman driver did not probed yet.
+ */
+int qman_is_probed(void);
+
+#endif /* __FSL_QMAN_H */