v4.19.13 snapshot.
diff --git a/include/media/i2c/saa7115.h b/include/media/i2c/saa7115.h
new file mode 100644
index 0000000..a0cda42
--- /dev/null
+++ b/include/media/i2c/saa7115.h
@@ -0,0 +1,140 @@
+/*
+ saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
+
+ Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _SAA7115_H_
+#define _SAA7115_H_
+
+/* s_routing inputs, outputs, and config */
+
+/* SAA7111/3/4/5 HW inputs */
+#define SAA7115_COMPOSITE0 0
+#define SAA7115_COMPOSITE1 1
+#define SAA7115_COMPOSITE2 2
+#define SAA7115_COMPOSITE3 3
+#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
+#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
+#define SAA7115_SVIDEO0 6
+#define SAA7115_SVIDEO1 7
+#define SAA7115_SVIDEO2 8
+#define SAA7115_SVIDEO3 9
+
+/* outputs */
+#define SAA7115_IPORT_ON 1
+#define SAA7115_IPORT_OFF 0
+
+/* SAA7111 specific outputs. */
+#define SAA7111_VBI_BYPASS 2
+#define SAA7111_FMT_YUV422 0x00
+#define SAA7111_FMT_RGB 0x40
+#define SAA7111_FMT_CCIR 0x80
+#define SAA7111_FMT_YUV411 0xc0
+
+/* config flags */
+/*
+ * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
+ * controls the IDQ signal polarity which is set to 'inverted' if the bit
+ * it 1 and to 'default' if it is 0.
+ */
+#define SAA7115_IDQ_IS_DEFAULT (1 << 0)
+
+/* s_crystal_freq values and flags */
+
+/* SAA7115 v4l2_crystal_freq frequency values */
+#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */
+#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */
+
+/* SAA7115 v4l2_crystal_freq audio clock control flags */
+#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */
+#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */
+#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
+#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
+
+/* ===== SAA7113 Config enums ===== */
+
+/* Register 0x08 "Horizontal time constant" [Bit 3..4]:
+ * Should be set to "Fast Locking Mode" according to the datasheet,
+ * and that is the default setting in the gm7113c_init table.
+ * saa7113_init sets this value to "VTR Mode". */
+enum saa7113_r08_htc {
+ SAA7113_HTC_TV_MODE = 0x00,
+ SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */
+ SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */
+};
+
+/* Register 0x10 "Output format selection" [Bit 6..7]:
+ * Defaults to ITU_656 as specified in datasheet. */
+enum saa7113_r10_ofts {
+ SAA7113_OFTS_ITU_656 = 0x0, /* Default */
+ SAA7113_OFTS_VFLAG_BY_VREF,
+ SAA7113_OFTS_VFLAG_BY_DATA_TYPE
+};
+
+/*
+ * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
+ * This is used to select what data is output on the RTS0 and RTS1 pins.
+ * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
+ * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
+ * in the datasheet, but is set to HREF_HS in the saa7113_init table.
+ */
+enum saa7113_r12_rts {
+ SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */
+ SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */
+ SAA7113_RTS_GPSW,
+ SAA7115_RTS_HL,
+ SAA7113_RTS_VL,
+ SAA7113_RTS_DL,
+ SAA7113_RTS_PLIN,
+ SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */
+ SAA7113_RTS_HS,
+ SAA7113_RTS_HQ,
+ SAA7113_RTS_ODD,
+ SAA7113_RTS_VS,
+ SAA7113_RTS_V123,
+ SAA7113_RTS_VGATE,
+ SAA7113_RTS_VREF,
+ SAA7113_RTS_FID
+};
+
+/**
+ * struct saa7115_platform_data - Allow overriding default initialization
+ *
+ * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table
+ * instead of saa7113_init table
+ * (saa7113 only)
+ * @saa7113_r08_htc: [R_08 - Bit 3..4]
+ * @saa7113_r10_vrln: [R_10 - Bit 3]
+ * default: Disabled for gm7113c_init
+ * Enabled for saa7113c_init
+ * @saa7113_r10_ofts: [R_10 - Bit 6..7]
+ * @saa7113_r12_rts0: [R_12 - Bit 0..3]
+ * @saa7113_r12_rts1: [R_12 - Bit 4..7]
+ * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled
+ */
+struct saa7115_platform_data {
+ bool saa7113_force_gm7113c_init;
+ enum saa7113_r08_htc *saa7113_r08_htc;
+ bool *saa7113_r10_vrln;
+ enum saa7113_r10_ofts *saa7113_r10_ofts;
+ enum saa7113_r12_rts *saa7113_r12_rts0;
+ enum saa7113_r12_rts *saa7113_r12_rts1;
+ bool *saa7113_r13_adlsb;
+};
+
+#endif