v4.19.13 snapshot.
diff --git a/include/media/drv-intf/cx2341x.h b/include/media/drv-intf/cx2341x.h
new file mode 100644
index 0000000..33a97bf
--- /dev/null
+++ b/include/media/drv-intf/cx2341x.h
@@ -0,0 +1,295 @@
+/*
+ cx23415/6/8 header containing common defines.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef CX2341X_H
+#define CX2341X_H
+
+#include <media/v4l2-ctrls.h>
+
+enum cx2341x_port {
+ CX2341X_PORT_MEMORY = 0,
+ CX2341X_PORT_STREAMING = 1,
+ CX2341X_PORT_SERIAL = 2
+};
+
+enum cx2341x_cap {
+ CX2341X_CAP_HAS_SLICED_VBI = 1 << 0,
+ CX2341X_CAP_HAS_TS = 1 << 1,
+ CX2341X_CAP_HAS_AC3 = 1 << 2,
+};
+
+struct cx2341x_mpeg_params {
+ /* misc */
+ u32 capabilities;
+ enum cx2341x_port port;
+ u16 width;
+ u16 height;
+ u16 is_50hz;
+
+ /* stream */
+ enum v4l2_mpeg_stream_type stream_type;
+ enum v4l2_mpeg_stream_vbi_fmt stream_vbi_fmt;
+ u16 stream_insert_nav_packets;
+
+ /* audio */
+ enum v4l2_mpeg_audio_sampling_freq audio_sampling_freq;
+ enum v4l2_mpeg_audio_encoding audio_encoding;
+ enum v4l2_mpeg_audio_l2_bitrate audio_l2_bitrate;
+ enum v4l2_mpeg_audio_ac3_bitrate audio_ac3_bitrate;
+ enum v4l2_mpeg_audio_mode audio_mode;
+ enum v4l2_mpeg_audio_mode_extension audio_mode_extension;
+ enum v4l2_mpeg_audio_emphasis audio_emphasis;
+ enum v4l2_mpeg_audio_crc audio_crc;
+ u32 audio_properties;
+ u16 audio_mute;
+
+ /* video */
+ enum v4l2_mpeg_video_encoding video_encoding;
+ enum v4l2_mpeg_video_aspect video_aspect;
+ u16 video_b_frames;
+ u16 video_gop_size;
+ u16 video_gop_closure;
+ enum v4l2_mpeg_video_bitrate_mode video_bitrate_mode;
+ u32 video_bitrate;
+ u32 video_bitrate_peak;
+ u16 video_temporal_decimation;
+ u16 video_mute;
+ u32 video_mute_yuv;
+
+ /* encoding filters */
+ enum v4l2_mpeg_cx2341x_video_spatial_filter_mode video_spatial_filter_mode;
+ u16 video_spatial_filter;
+ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type video_luma_spatial_filter_type;
+ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type video_chroma_spatial_filter_type;
+ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode video_temporal_filter_mode;
+ u16 video_temporal_filter;
+ enum v4l2_mpeg_cx2341x_video_median_filter_type video_median_filter_type;
+ u16 video_luma_median_filter_top;
+ u16 video_luma_median_filter_bottom;
+ u16 video_chroma_median_filter_top;
+ u16 video_chroma_median_filter_bottom;
+};
+
+#define CX2341X_MBOX_MAX_DATA 16
+
+extern const u32 cx2341x_mpeg_ctrls[];
+typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out,
+ u32 data[CX2341X_MBOX_MAX_DATA]);
+int cx2341x_update(void *priv, cx2341x_mbox_func func,
+ const struct cx2341x_mpeg_params *old,
+ const struct cx2341x_mpeg_params *new);
+int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
+ struct v4l2_queryctrl *qctrl);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
+ struct v4l2_ext_controls *ctrls, unsigned int cmd);
+void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
+void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
+
+struct cx2341x_handler;
+
+struct cx2341x_handler_ops {
+ /* needed for the video clock freq */
+ int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for dualwatch */
+ int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the video resolution */
+ int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the sliced vbi insertion data structures */
+ int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val);
+};
+
+struct cx2341x_handler {
+ u32 capabilities;
+ enum cx2341x_port port;
+ u16 width;
+ u16 height;
+ u16 is_50hz;
+ u32 audio_properties;
+
+ struct v4l2_ctrl_handler hdl;
+ void *priv;
+ cx2341x_mbox_func func;
+ const struct cx2341x_handler_ops *ops;
+
+ struct v4l2_ctrl *stream_vbi_fmt;
+
+ struct {
+ /* audio cluster */
+ struct v4l2_ctrl *audio_sampling_freq;
+ struct v4l2_ctrl *audio_encoding;
+ struct v4l2_ctrl *audio_l2_bitrate;
+ struct v4l2_ctrl *audio_mode;
+ struct v4l2_ctrl *audio_mode_extension;
+ struct v4l2_ctrl *audio_emphasis;
+ struct v4l2_ctrl *audio_crc;
+ struct v4l2_ctrl *audio_ac3_bitrate;
+ };
+
+ struct {
+ /* video gop cluster */
+ struct v4l2_ctrl *video_b_frames;
+ struct v4l2_ctrl *video_gop_size;
+ };
+
+ struct {
+ /* stream type cluster */
+ struct v4l2_ctrl *stream_type;
+ struct v4l2_ctrl *video_encoding;
+ struct v4l2_ctrl *video_bitrate_mode;
+ struct v4l2_ctrl *video_bitrate;
+ struct v4l2_ctrl *video_bitrate_peak;
+ };
+
+ struct {
+ /* video mute cluster */
+ struct v4l2_ctrl *video_mute;
+ struct v4l2_ctrl *video_mute_yuv;
+ };
+
+ struct {
+ /* video filter mode cluster */
+ struct v4l2_ctrl *video_spatial_filter_mode;
+ struct v4l2_ctrl *video_temporal_filter_mode;
+ struct v4l2_ctrl *video_median_filter_type;
+ };
+
+ struct {
+ /* video filter type cluster */
+ struct v4l2_ctrl *video_luma_spatial_filter_type;
+ struct v4l2_ctrl *video_chroma_spatial_filter_type;
+ };
+
+ struct {
+ /* video filter cluster */
+ struct v4l2_ctrl *video_spatial_filter;
+ struct v4l2_ctrl *video_temporal_filter;
+ };
+
+ struct {
+ /* video median cluster */
+ struct v4l2_ctrl *video_luma_median_filter_top;
+ struct v4l2_ctrl *video_luma_median_filter_bottom;
+ struct v4l2_ctrl *video_chroma_median_filter_top;
+ struct v4l2_ctrl *video_chroma_median_filter_bottom;
+ };
+};
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+ unsigned nr_of_controls_hint);
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz);
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl);
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy);
+
+/* Firmware names */
+#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
+/* Decoder firmware for the cx23415 only */
+#define CX2341X_FIRM_DEC_FILENAME "v4l-cx2341x-dec.fw"
+
+/* Firmware API commands */
+
+/* MPEG decoder API, specific to the cx23415 */
+#define CX2341X_DEC_PING_FW 0x00
+#define CX2341X_DEC_START_PLAYBACK 0x01
+#define CX2341X_DEC_STOP_PLAYBACK 0x02
+#define CX2341X_DEC_SET_PLAYBACK_SPEED 0x03
+#define CX2341X_DEC_STEP_VIDEO 0x05
+#define CX2341X_DEC_SET_DMA_BLOCK_SIZE 0x08
+#define CX2341X_DEC_GET_XFER_INFO 0x09
+#define CX2341X_DEC_GET_DMA_STATUS 0x0a
+#define CX2341X_DEC_SCHED_DMA_FROM_HOST 0x0b
+#define CX2341X_DEC_PAUSE_PLAYBACK 0x0d
+#define CX2341X_DEC_HALT_FW 0x0e
+#define CX2341X_DEC_SET_STANDARD 0x10
+#define CX2341X_DEC_GET_VERSION 0x11
+#define CX2341X_DEC_SET_STREAM_INPUT 0x14
+#define CX2341X_DEC_GET_TIMING_INFO 0x15
+#define CX2341X_DEC_SET_AUDIO_MODE 0x16
+#define CX2341X_DEC_SET_EVENT_NOTIFICATION 0x17
+#define CX2341X_DEC_SET_DISPLAY_BUFFERS 0x18
+#define CX2341X_DEC_EXTRACT_VBI 0x19
+#define CX2341X_DEC_SET_DECODER_SOURCE 0x1a
+#define CX2341X_DEC_SET_PREBUFFERING 0x1e
+
+/* MPEG encoder API */
+#define CX2341X_ENC_PING_FW 0x80
+#define CX2341X_ENC_START_CAPTURE 0x81
+#define CX2341X_ENC_STOP_CAPTURE 0x82
+#define CX2341X_ENC_SET_AUDIO_ID 0x89
+#define CX2341X_ENC_SET_VIDEO_ID 0x8b
+#define CX2341X_ENC_SET_PCR_ID 0x8d
+#define CX2341X_ENC_SET_FRAME_RATE 0x8f
+#define CX2341X_ENC_SET_FRAME_SIZE 0x91
+#define CX2341X_ENC_SET_BIT_RATE 0x95
+#define CX2341X_ENC_SET_GOP_PROPERTIES 0x97
+#define CX2341X_ENC_SET_ASPECT_RATIO 0x99
+#define CX2341X_ENC_SET_DNR_FILTER_MODE 0x9b
+#define CX2341X_ENC_SET_DNR_FILTER_PROPS 0x9d
+#define CX2341X_ENC_SET_CORING_LEVELS 0x9f
+#define CX2341X_ENC_SET_SPATIAL_FILTER_TYPE 0xa1
+#define CX2341X_ENC_SET_VBI_LINE 0xb7
+#define CX2341X_ENC_SET_STREAM_TYPE 0xb9
+#define CX2341X_ENC_SET_OUTPUT_PORT 0xbb
+#define CX2341X_ENC_SET_AUDIO_PROPERTIES 0xbd
+#define CX2341X_ENC_HALT_FW 0xc3
+#define CX2341X_ENC_GET_VERSION 0xc4
+#define CX2341X_ENC_SET_GOP_CLOSURE 0xc5
+#define CX2341X_ENC_GET_SEQ_END 0xc6
+#define CX2341X_ENC_SET_PGM_INDEX_INFO 0xc7
+#define CX2341X_ENC_SET_VBI_CONFIG 0xc8
+#define CX2341X_ENC_SET_DMA_BLOCK_SIZE 0xc9
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_10 0xca
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 0xcb
+#define CX2341X_ENC_SCHED_DMA_TO_HOST 0xcc
+#define CX2341X_ENC_INITIALIZE_INPUT 0xcd
+#define CX2341X_ENC_SET_FRAME_DROP_RATE 0xd0
+#define CX2341X_ENC_PAUSE_ENCODER 0xd2
+#define CX2341X_ENC_REFRESH_INPUT 0xd3
+#define CX2341X_ENC_SET_COPYRIGHT 0xd4
+#define CX2341X_ENC_SET_EVENT_NOTIFICATION 0xd5
+#define CX2341X_ENC_SET_NUM_VSYNC_LINES 0xd6
+#define CX2341X_ENC_SET_PLACEHOLDER 0xd7
+#define CX2341X_ENC_MUTE_VIDEO 0xd9
+#define CX2341X_ENC_MUTE_AUDIO 0xda
+#define CX2341X_ENC_SET_VERT_CROP_LINE 0xdb
+#define CX2341X_ENC_MISC 0xdc
+
+/* OSD API, specific to the cx23415 */
+#define CX2341X_OSD_GET_FRAMEBUFFER 0x41
+#define CX2341X_OSD_GET_PIXEL_FORMAT 0x42
+#define CX2341X_OSD_SET_PIXEL_FORMAT 0x43
+#define CX2341X_OSD_GET_STATE 0x44
+#define CX2341X_OSD_SET_STATE 0x45
+#define CX2341X_OSD_GET_OSD_COORDS 0x46
+#define CX2341X_OSD_SET_OSD_COORDS 0x47
+#define CX2341X_OSD_GET_SCREEN_COORDS 0x48
+#define CX2341X_OSD_SET_SCREEN_COORDS 0x49
+#define CX2341X_OSD_GET_GLOBAL_ALPHA 0x4a
+#define CX2341X_OSD_SET_GLOBAL_ALPHA 0x4b
+#define CX2341X_OSD_SET_BLEND_COORDS 0x4c
+#define CX2341X_OSD_GET_FLICKER_STATE 0x4f
+#define CX2341X_OSD_SET_FLICKER_STATE 0x50
+#define CX2341X_OSD_BLT_COPY 0x52
+#define CX2341X_OSD_BLT_FILL 0x53
+#define CX2341X_OSD_BLT_TEXT 0x54
+#define CX2341X_OSD_SET_FRAMEBUFFER_WINDOW 0x56
+#define CX2341X_OSD_SET_CHROMA_KEY 0x60
+#define CX2341X_OSD_GET_ALPHA_CONTENT_INDEX 0x61
+#define CX2341X_OSD_SET_ALPHA_CONTENT_INDEX 0x62
+
+#endif /* CX2341X_H */
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
new file mode 100644
index 0000000..783c5bd
--- /dev/null
+++ b/include/media/drv-intf/cx25840.h
@@ -0,0 +1,188 @@
+/*
+ cx25840.h - definition for cx25840/1/2/3 inputs
+
+ Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _CX25840_H_
+#define _CX25840_H_
+
+/* Note that the cx25840 driver requires that the bridge driver calls the
+ v4l2_subdev's init operation in order to load the driver's firmware.
+ Without this the audio standard detection will fail and you will
+ only get mono.
+
+ Since loading the firmware is often problematic when the driver is
+ compiled into the kernel I recommend postponing calling this function
+ until the first open of the video device. Another reason for
+ postponing it is that loading this firmware takes a long time (seconds)
+ due to the slow i2c bus speed. So it will speed up the boot process if
+ you can avoid loading the fw as long as the video device isn't used. */
+
+enum cx25840_video_input {
+ /* Composite video inputs In1-In8 */
+ CX25840_COMPOSITE1 = 1,
+ CX25840_COMPOSITE2,
+ CX25840_COMPOSITE3,
+ CX25840_COMPOSITE4,
+ CX25840_COMPOSITE5,
+ CX25840_COMPOSITE6,
+ CX25840_COMPOSITE7,
+ CX25840_COMPOSITE8,
+
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
+ chroma input (In5-In8) */
+ CX25840_SVIDEO_LUMA1 = 0x10,
+ CX25840_SVIDEO_LUMA2 = 0x20,
+ CX25840_SVIDEO_LUMA3 = 0x30,
+ CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_LUMA5 = 0x50,
+ CX25840_SVIDEO_LUMA6 = 0x60,
+ CX25840_SVIDEO_LUMA7 = 0x70,
+ CX25840_SVIDEO_LUMA8 = 0x80,
+ CX25840_SVIDEO_CHROMA4 = 0x400,
+ CX25840_SVIDEO_CHROMA5 = 0x500,
+ CX25840_SVIDEO_CHROMA6 = 0x600,
+ CX25840_SVIDEO_CHROMA7 = 0x700,
+ CX25840_SVIDEO_CHROMA8 = 0x800,
+
+ /* S-Video aliases for common luma/chroma combinations */
+ CX25840_SVIDEO1 = 0x510,
+ CX25840_SVIDEO2 = 0x620,
+ CX25840_SVIDEO3 = 0x730,
+ CX25840_SVIDEO4 = 0x840,
+
+ /* Allow frames to specify specific input configurations */
+ CX25840_VIN1_CH1 = 0x80000000,
+ CX25840_VIN2_CH1 = 0x80000001,
+ CX25840_VIN3_CH1 = 0x80000002,
+ CX25840_VIN4_CH1 = 0x80000003,
+ CX25840_VIN5_CH1 = 0x80000004,
+ CX25840_VIN6_CH1 = 0x80000005,
+ CX25840_VIN7_CH1 = 0x80000006,
+ CX25840_VIN8_CH1 = 0x80000007,
+ CX25840_VIN4_CH2 = 0x80000000,
+ CX25840_VIN5_CH2 = 0x80000010,
+ CX25840_VIN6_CH2 = 0x80000020,
+ CX25840_NONE_CH2 = 0x80000030,
+ CX25840_VIN7_CH3 = 0x80000000,
+ CX25840_VIN8_CH3 = 0x80000040,
+ CX25840_NONE0_CH3 = 0x80000080,
+ CX25840_NONE1_CH3 = 0x800000c0,
+ CX25840_SVIDEO_ON = 0x80000100,
+ CX25840_COMPONENT_ON = 0x80000200,
+ CX25840_DIF_ON = 0x80000400,
+};
+
+enum cx25840_audio_input {
+ /* Audio inputs: serial or In4-In8 */
+ CX25840_AUDIO_SERIAL,
+ CX25840_AUDIO4 = 4,
+ CX25840_AUDIO5,
+ CX25840_AUDIO6,
+ CX25840_AUDIO7,
+ CX25840_AUDIO8,
+};
+
+enum cx25840_io_pin {
+ CX25840_PIN_DVALID_PRGM0 = 0,
+ CX25840_PIN_FIELD_PRGM1,
+ CX25840_PIN_HRESET_PRGM2,
+ CX25840_PIN_VRESET_HCTL_PRGM3,
+ CX25840_PIN_IRQ_N_PRGM4,
+ CX25840_PIN_IR_TX_PRGM6,
+ CX25840_PIN_IR_RX_PRGM5,
+ CX25840_PIN_GPIO0_PRGM8,
+ CX25840_PIN_GPIO1_PRGM9,
+ CX25840_PIN_SA_SDIN, /* Alternate GP Input only */
+ CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */
+ CX25840_PIN_PLL_CLK_PRGM7,
+ CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */
+};
+
+enum cx25840_io_pad {
+ /* Output pads */
+ CX25840_PAD_DEFAULT = 0,
+ CX25840_PAD_ACTIVE,
+ CX25840_PAD_VACTIVE,
+ CX25840_PAD_CBFLAG,
+ CX25840_PAD_VID_DATA_EXT0,
+ CX25840_PAD_VID_DATA_EXT1,
+ CX25840_PAD_GPO0,
+ CX25840_PAD_GPO1,
+ CX25840_PAD_GPO2,
+ CX25840_PAD_GPO3,
+ CX25840_PAD_IRQ_N,
+ CX25840_PAD_AC_SYNC,
+ CX25840_PAD_AC_SDOUT,
+ CX25840_PAD_PLL_CLK,
+ CX25840_PAD_VRESET,
+ CX25840_PAD_RESERVED,
+ /* Pads for PLL_CLK output only */
+ CX25840_PAD_XTI_X5_DLL,
+ CX25840_PAD_AUX_PLL,
+ CX25840_PAD_VID_PLL,
+ CX25840_PAD_XTI,
+ /* Input Pads */
+ CX25840_PAD_GPI0,
+ CX25840_PAD_GPI1,
+ CX25840_PAD_GPI2,
+ CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+ CX25840_PIN_DRIVE_MEDIUM = 0,
+ CX25840_PIN_DRIVE_SLOW,
+ CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+ CX23885_PIN_IR_RX_GPIO19,
+ CX23885_PIN_IR_TX_GPIO20,
+ CX23885_PIN_I2S_SDAT_GPIO21,
+ CX23885_PIN_I2S_WCLK_GPIO22,
+ CX23885_PIN_I2S_BCLK_GPIO23,
+ CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+ CX23885_PAD_IR_RX,
+ CX23885_PAD_GPIO19,
+ CX23885_PAD_IR_TX,
+ CX23885_PAD_GPIO20,
+ CX23885_PAD_I2S_SDAT,
+ CX23885_PAD_GPIO21,
+ CX23885_PAD_I2S_WCLK,
+ CX23885_PAD_GPIO22,
+ CX23885_PAD_I2S_BCLK,
+ CX23885_PAD_GPIO23,
+ CX23885_PAD_IRQ_N,
+ CX23885_PAD_GPIO16,
+};
+
+/* pvr150_workaround activates a workaround for a hardware bug that is
+ present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+ certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+ audio autodetect fails on some channels for these models and the workaround
+ is to select the audio standard explicitly. Many thanks to Hauppauge for
+ providing this information.
+ This platform data only needs to be supplied by the ivtv driver. */
+struct cx25840_platform_data {
+ int pvr150_workaround;
+};
+
+#endif
diff --git a/include/media/drv-intf/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h
new file mode 100644
index 0000000..f9c6433
--- /dev/null
+++ b/include/media/drv-intf/exynos-fimc.h
@@ -0,0 +1,162 @@
+/*
+ * Samsung S5P/Exynos4 SoC series camera interface driver header
+ *
+ * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_FIMC_H_
+#define S5P_FIMC_H_
+
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-mediabus.h>
+
+/*
+ * Enumeration of data inputs to the camera subsystem.
+ */
+enum fimc_input {
+ FIMC_INPUT_PARALLEL_0 = 1,
+ FIMC_INPUT_PARALLEL_1,
+ FIMC_INPUT_MIPI_CSI2_0 = 3,
+ FIMC_INPUT_MIPI_CSI2_1,
+ FIMC_INPUT_WRITEBACK_A = 5,
+ FIMC_INPUT_WRITEBACK_B,
+ FIMC_INPUT_WRITEBACK_ISP = 5,
+};
+
+/*
+ * Enumeration of the FIMC data bus types.
+ */
+enum fimc_bus_type {
+ /* Camera parallel bus */
+ FIMC_BUS_TYPE_ITU_601 = 1,
+ /* Camera parallel bus with embedded synchronization */
+ FIMC_BUS_TYPE_ITU_656,
+ /* Camera MIPI-CSI2 serial bus */
+ FIMC_BUS_TYPE_MIPI_CSI2,
+ /* FIFO link from LCD controller (WriteBack A) */
+ FIMC_BUS_TYPE_LCD_WRITEBACK_A,
+ /* FIFO link from LCD controller (WriteBack B) */
+ FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+ /* FIFO link from FIMC-IS */
+ FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+};
+
+#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2)
+#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4)
+
+/*
+ * The subdevices' group IDs.
+ */
+#define GRP_ID_SENSOR (1 << 8)
+#define GRP_ID_FIMC_IS_SENSOR (1 << 9)
+#define GRP_ID_WRITEBACK (1 << 10)
+#define GRP_ID_CSIS (1 << 11)
+#define GRP_ID_FIMC (1 << 12)
+#define GRP_ID_FLITE (1 << 13)
+#define GRP_ID_FIMC_IS (1 << 14)
+
+/**
+ * struct fimc_source_info - video source description required for the host
+ * interface configuration
+ *
+ * @fimc_bus_type: FIMC camera input type
+ * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
+ * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ */
+struct fimc_source_info {
+ enum fimc_bus_type fimc_bus_type;
+ enum fimc_bus_type sensor_bus_type;
+ u16 flags;
+ u16 mux_id;
+};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at begining of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
+#define FIMC_MAX_PLANES 3
+
+/**
+ * struct fimc_fmt - color format data structure
+ * @mbus_code: media bus pixel code, -1 if not applicable
+ * @name: format description
+ * @fourcc: fourcc code for this format, 0 if not applicable
+ * @color: the driver's private color format id
+ * @memplanes: number of physically non-contiguous data planes
+ * @colplanes: number of physically contiguous data planes
+ * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*)
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no)
+ * @flags: flags indicating which operation mode format applies to
+ */
+struct fimc_fmt {
+ u32 mbus_code;
+ char *name;
+ u32 fourcc;
+ u32 color;
+ u16 memplanes;
+ u16 colplanes;
+ u8 colorspace;
+ u8 depth[FIMC_MAX_PLANES];
+ u16 mdataplanes;
+ u16 flags;
+#define FMT_FLAGS_CAM (1 << 0)
+#define FMT_FLAGS_M2M_IN (1 << 1)
+#define FMT_FLAGS_M2M_OUT (1 << 2)
+#define FMT_FLAGS_M2M (1 << 1 | 1 << 2)
+#define FMT_HAS_ALPHA (1 << 3)
+#define FMT_FLAGS_COMPRESSED (1 << 4)
+#define FMT_FLAGS_WRITEBACK (1 << 5)
+#define FMT_FLAGS_RAW_BAYER (1 << 6)
+#define FMT_FLAGS_YUV (1 << 7)
+};
+
+struct exynos_media_pipeline;
+
+/*
+ * Media pipeline operations to be called from within a video node, i.e. the
+ * last entity within the pipeline. Implemented by related media device driver.
+ */
+struct exynos_media_pipeline_ops {
+ int (*prepare)(struct exynos_media_pipeline *p,
+ struct media_entity *me);
+ int (*unprepare)(struct exynos_media_pipeline *p);
+ int (*open)(struct exynos_media_pipeline *p, struct media_entity *me,
+ bool resume);
+ int (*close)(struct exynos_media_pipeline *p);
+ int (*set_stream)(struct exynos_media_pipeline *p, bool state);
+};
+
+struct exynos_video_entity {
+ struct video_device vdev;
+ struct exynos_media_pipeline *pipe;
+};
+
+struct exynos_media_pipeline {
+ struct media_pipeline mp;
+ const struct exynos_media_pipeline_ops *ops;
+};
+
+static inline struct exynos_video_entity *vdev_to_exynos_video_entity(
+ struct video_device *vdev)
+{
+ return container_of(vdev, struct exynos_video_entity, vdev);
+}
+
+#define fimc_pipeline_call(ent, op, args...) \
+ ((!(ent) || !(ent)->pipe) ? -ENOENT : \
+ (((ent)->pipe->ops && (ent)->pipe->ops->op) ? \
+ (ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD)) \
+
+#endif /* S5P_FIMC_H_ */
diff --git a/include/media/drv-intf/msp3400.h b/include/media/drv-intf/msp3400.h
new file mode 100644
index 0000000..db98ce4
--- /dev/null
+++ b/include/media/drv-intf/msp3400.h
@@ -0,0 +1,225 @@
+/*
+ msp3400.h - definition for msp3400 inputs and outputs
+
+ Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _MSP3400_H_
+#define _MSP3400_H_
+
+/* msp3400 routing
+ ===============
+
+ The msp3400 has a complicated routing scheme with many possible
+ combinations. The details are all in the datasheets but I will try
+ to give a short description here.
+
+ Inputs
+ ======
+
+ There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
+ to select which tuner input to use and which SCART input to use. The
+ selected tuner input, the selected SCART input and all I2S inputs go to
+ the DSP (the tuner input first goes through the demodulator).
+
+ The DSP handles things like volume, bass/treble, balance, and some chips
+ have support for surround sound. It has several outputs: MAIN, AUX, I2S
+ and SCART1/2. Each output can select which DSP input to use. So the MAIN
+ output can select the tuner input while at the same time the SCART1 output
+ uses the I2S input.
+
+ Outputs
+ =======
+
+ Most DSP outputs are also the outputs of the msp3400. However, the SCART
+ outputs of the msp3400 can select which input to use: either the SCART1 or
+ SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
+ bypassing the DSP.
+
+ Summary
+ =======
+
+ So to specify a complete routing scheme for the msp3400 you will have to
+ specify in the 'input' arg of the s_routing function:
+
+ 1) which tuner input to use
+ 2) which SCART input to use
+ 3) which DSP input to use for each DSP output
+
+ And in the 'output' arg of the s_routing function you specify:
+
+ 1) which SCART input to use for each SCART output
+
+ Depending on how the msp is wired to the other components you can
+ ignore or mute certain inputs or outputs.
+
+ Also, depending on the msp version only a subset of the inputs or
+ outputs may be present. At the end of this header some tables are
+ added containing a list of what is available for each msp version.
+ */
+
+/* Inputs to the DSP unit: two independent selections have to be made:
+ 1) the tuner (SIF) input
+ 2) the SCART input
+ Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner
+ input, bits 4-7 are reserved.
+ */
+
+/* SCART input to DSP selection */
+#define MSP_IN_SCART1 0 /* Pin SC1_IN */
+#define MSP_IN_SCART2 1 /* Pin SC2_IN */
+#define MSP_IN_SCART3 2 /* Pin SC3_IN */
+#define MSP_IN_SCART4 3 /* Pin SC4_IN */
+#define MSP_IN_MONO 6 /* Pin MONO_IN */
+#define MSP_IN_MUTE 7 /* Mute DSP input */
+#define MSP_SCART_TO_DSP(in) (in)
+/* Tuner input to demodulator and DSP selection */
+#define MSP_IN_TUNER1 0 /* Analog Sound IF input pin ANA_IN1 */
+#define MSP_IN_TUNER2 1 /* Analog Sound IF input pin ANA_IN2 */
+#define MSP_TUNER_TO_DSP(in) ((in) << 3)
+
+/* The msp has up to 5 DSP outputs, each output can independently select
+ a DSP input.
+
+ The DSP outputs are: loudspeaker output (aka MAIN), headphones output
+ (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output.
+ There also is a quasi-peak detector output, but that is not used by
+ this driver and is set to the same input as the loudspeaker output.
+ Not all outputs are supported by all msp models. Setting the input
+ of an unsupported output will be ignored by the driver.
+
+ There are up to 16 DSP inputs to choose from, so each output is
+ assigned 4 bits.
+
+ Note: the 44x8G can mix two inputs and feed the result back to the
+ DSP. This is currently not implemented. Also not implemented is the
+ multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate
+ a need for one of those features then additional support can be added. */
+#define MSP_DSP_IN_TUNER 0 /* Tuner DSP input */
+#define MSP_DSP_IN_SCART 2 /* SCART DSP input */
+#define MSP_DSP_IN_I2S1 5 /* I2S1 DSP input */
+#define MSP_DSP_IN_I2S2 6 /* I2S2 DSP input */
+#define MSP_DSP_IN_I2S3 7 /* I2S3 DSP input */
+#define MSP_DSP_IN_MAIN_AVC 11 /* MAIN AVC processed DSP input */
+#define MSP_DSP_IN_MAIN 12 /* MAIN DSP input */
+#define MSP_DSP_IN_AUX 13 /* AUX DSP input */
+#define MSP_DSP_TO_MAIN(in) ((in) << 4)
+#define MSP_DSP_TO_AUX(in) ((in) << 8)
+#define MSP_DSP_TO_SCART1(in) ((in) << 12)
+#define MSP_DSP_TO_SCART2(in) ((in) << 16)
+#define MSP_DSP_TO_I2S(in) ((in) << 20)
+
+/* Output SCART select: the SCART outputs can select which input
+ to use. */
+#define MSP_SC_IN_SCART1 0 /* SCART1 input, bypassing the DSP */
+#define MSP_SC_IN_SCART2 1 /* SCART2 input, bypassing the DSP */
+#define MSP_SC_IN_SCART3 2 /* SCART3 input, bypassing the DSP */
+#define MSP_SC_IN_SCART4 3 /* SCART4 input, bypassing the DSP */
+#define MSP_SC_IN_DSP_SCART1 4 /* DSP SCART1 input */
+#define MSP_SC_IN_DSP_SCART2 5 /* DSP SCART2 input */
+#define MSP_SC_IN_MONO 6 /* MONO input, bypassing the DSP */
+#define MSP_SC_IN_MUTE 7 /* MUTE output */
+#define MSP_SC_TO_SCART1(in) (in)
+#define MSP_SC_TO_SCART2(in) ((in) << 4)
+
+/* Shortcut macros */
+#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \
+ (MSP_SCART_TO_DSP(sc) | \
+ MSP_TUNER_TO_DSP(t) | \
+ MSP_DSP_TO_MAIN(main_aux_src) | \
+ MSP_DSP_TO_AUX(main_aux_src) | \
+ MSP_DSP_TO_SCART1(sc_i2s_src) | \
+ MSP_DSP_TO_SCART2(sc_i2s_src) | \
+ MSP_DSP_TO_I2S(sc_i2s_src))
+#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \
+ MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER)
+#define MSP_OUTPUT(sc) \
+ (MSP_SC_TO_SCART1(sc) | \
+ MSP_SC_TO_SCART2(sc))
+/* This equals the RESET position of the msp3400 ACB register */
+#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \
+ MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1))
+
+/* Tuner inputs vs. msp version */
+/* Chip TUNER_1 TUNER_2
+ -------------------------
+ msp34x0b y y
+ msp34x0c y y
+ msp34x0d y y
+ msp34x5d y n
+ msp34x7d y n
+ msp34x0g y y
+ msp34x1g y y
+ msp34x2g y y
+ msp34x5g y n
+ msp34x7g y n
+ msp44x0g y y
+ msp44x8g y y
+ */
+
+/* SCART inputs vs. msp version */
+/* Chip SC1 SC2 SC3 SC4
+ -------------------------
+ msp34x0b y y y n
+ msp34x0c y y y n
+ msp34x0d y y y y
+ msp34x5d y y n n
+ msp34x7d y n n n
+ msp34x0g y y y y
+ msp34x1g y y y y
+ msp34x2g y y y y
+ msp34x5g y y n n
+ msp34x7g y n n n
+ msp44x0g y y y y
+ msp44x8g y y y y
+ */
+
+/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */
+/* Chip I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX
+ ------------------------------------------
+ msp34x0b y n n n n n
+ msp34x0c y y n n n n
+ msp34x0d y y n n n n
+ msp34x5d y y n n n n
+ msp34x7d n n n n n n
+ msp34x0g y y n n n n
+ msp34x1g y y n n n n
+ msp34x2g y y n y y y
+ msp34x5g y y n n n n
+ msp34x7g n n n n n n
+ msp44x0g y y y y y y
+ msp44x8g y y y n n n
+ */
+
+/* DSP outputs vs. msp version */
+/* Chip MAIN AUX SCART1 SCART2 I2S
+ ------------------------------------
+ msp34x0b y y y n y
+ msp34x0c y y y n y
+ msp34x0d y y y y y
+ msp34x5d y n y n y
+ msp34x7d y n y n n
+ msp34x0g y y y y y
+ msp34x1g y y y y y
+ msp34x2g y y y y y
+ msp34x5g y n y n y
+ msp34x7g y n y n n
+ msp44x0g y y y y y
+ msp44x8g y y y y y
+ */
+
+#endif /* MSP3400_H */
diff --git a/include/media/drv-intf/renesas-ceu.h b/include/media/drv-intf/renesas-ceu.h
new file mode 100644
index 0000000..52841d1
--- /dev/null
+++ b/include/media/drv-intf/renesas-ceu.h
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * renesas-ceu.h - Renesas CEU driver interface
+ *
+ * Copyright 2017-2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#ifndef __MEDIA_DRV_INTF_RENESAS_CEU_H__
+#define __MEDIA_DRV_INTF_RENESAS_CEU_H__
+
+#define CEU_MAX_SUBDEVS 2
+
+struct ceu_async_subdev {
+ unsigned long flags;
+ unsigned char bus_width;
+ unsigned char bus_shift;
+ unsigned int i2c_adapter_id;
+ unsigned int i2c_address;
+};
+
+struct ceu_platform_data {
+ unsigned int num_subdevs;
+ struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS];
+};
+
+#endif /* ___MEDIA_DRV_INTF_RENESAS_CEU_H__ */
diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h
new file mode 100644
index 0000000..df96c2c
--- /dev/null
+++ b/include/media/drv-intf/s3c_camif.h
@@ -0,0 +1,45 @@
+/*
+ * s3c24xx/s3c64xx SoC series Camera Interface (CAMIF) driver
+ *
+ * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef MEDIA_S3C_CAMIF_
+#define MEDIA_S3C_CAMIF_
+
+#include <linux/i2c.h>
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s3c_camif_sensor_info - an image sensor description
+ * @i2c_board_info: pointer to an I2C sensor subdevice board info
+ * @clock_frequency: frequency of the clock the host provides to a sensor
+ * @mbus_type: media bus type
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
+ * @use_field: 1 if parallel bus FIELD signal is used (only s3c64xx)
+ */
+struct s3c_camif_sensor_info {
+ struct i2c_board_info i2c_board_info;
+ unsigned long clock_frequency;
+ enum v4l2_mbus_type mbus_type;
+ u16 i2c_bus_num;
+ u16 flags;
+ u8 use_field;
+};
+
+struct s3c_camif_plat_data {
+ struct s3c_camif_sensor_info sensor;
+ int (*gpio_get)(void);
+ int (*gpio_put)(void);
+};
+
+/* Platform default helper functions */
+int s3c_camif_gpio_get(void);
+int s3c_camif_gpio_put(void);
+
+#endif /* MEDIA_S3C_CAMIF_ */
diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h
new file mode 100644
index 0000000..a7bf2c4
--- /dev/null
+++ b/include/media/drv-intf/saa7146.h
@@ -0,0 +1,472 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/delay.h> /* for delay-stuff */
+#include <linux/slab.h> /* for kmalloc/kfree */
+#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h> /* for "__init" */
+#include <linux/interrupt.h> /* for IMMEDIATE_BH */
+#include <linux/kmod.h> /* for kernel module loader */
+#include <linux/i2c.h> /* for i2c subsystem */
+#include <asm/io.h> /* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#include <linux/vmalloc.h> /* for vmalloc() */
+#include <linux/mm.h> /* for vmalloc_to_page() */
+
+#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr) readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+#ifndef DEBUG_VARIABLE
+ #define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...) \
+do { \
+ if (DEBUG_VARIABLE & mask) \
+ pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__)
+
+#define SAA7146_ISR_CLEAR(x,y) \
+ saa7146_write(x, ISR, (y));
+
+struct module;
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+ unsigned int size;
+ __le32 *cpu;
+ dma_addr_t dma;
+ /* used for offsets for u,v planes for planar capture modes */
+ unsigned long offset;
+ /* used for custom pagetables (used for example by budget dvb cards) */
+ struct scatterlist *slist;
+ int nents;
+};
+
+struct saa7146_pci_extension_data {
+ struct saa7146_extension *ext;
+ void *ext_priv; /* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \
+ { \
+ .vendor = PCI_VENDOR_ID_PHILIPS, \
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7146, \
+ .subvendor = x_vendor, \
+ .subdevice = x_device, \
+ .driver_data = (unsigned long)& x_var, \
+ }
+
+struct saa7146_extension
+{
+ char name[32]; /* name of the device */
+#define SAA7146_USE_I2C_IRQ 0x1
+#define SAA7146_I2C_SHORT_DELAY 0x2
+ int flags;
+
+ /* pairs of subvendor and subdevice ids for
+ supported devices, last entry 0xffff, 0xfff */
+ struct module *module;
+ struct pci_driver driver;
+ const struct pci_device_id *pci_tbl;
+
+ /* extension functions */
+ int (*probe)(struct saa7146_dev *);
+ int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+ int (*detach)(struct saa7146_dev*);
+
+ u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */
+ void (*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+ dma_addr_t dma_handle;
+ __le32 *cpu_addr;
+};
+
+struct saa7146_dev
+{
+ struct module *module;
+
+ struct v4l2_device v4l2_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ /* different device locks */
+ spinlock_t slock;
+ struct mutex v4l2_lock;
+
+ unsigned char __iomem *mem; /* pointer to mapped IO memory */
+ u32 revision; /* chip revision; needed for bug-workarounds*/
+
+ /* pci-device & irq stuff*/
+ char name[32];
+ struct pci_dev *pci;
+ u32 int_todo;
+ spinlock_t int_slock;
+
+ /* extension handling */
+ struct saa7146_extension *ext; /* indicates if handled by extension */
+ void *ext_priv; /* pointer for extension private use (most likely some private data) */
+ struct saa7146_ext_vv *ext_vv_data;
+
+ /* per device video/vbi informations (if available) */
+ struct saa7146_vv *vv_data;
+ void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+ /* i2c-stuff */
+ struct mutex i2c_lock;
+
+ u32 i2c_bitrate;
+ struct saa7146_dma d_i2c; /* pointer to i2c memory */
+ wait_queue_head_t i2c_wq;
+ int i2c_op;
+
+ /* memories */
+ struct saa7146_dma d_rps0;
+ struct saa7146_dma d_rps1;
+};
+
+static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
+}
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+
+/* from saa7146_core.c */
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM ( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM ( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1 0x0000000800
+#define PV1 0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP 0x00000000 /* No operation */
+#define CMD_CLR_EVENT 0x00000000 /* Clear event */
+#define CMD_SET_EVENT 0x10000000 /* Set signal event */
+#define CMD_PAUSE 0x20000000 /* Pause */
+#define CMD_CHECK_LATE 0x30000000 /* Check late */
+#define CMD_UPLOAD 0x40000000 /* Upload */
+#define CMD_STOP 0x50000000 /* Stop */
+#define CMD_INTERRUPT 0x60000000 /* Interrupt */
+#define CMD_JUMP 0x80000000 /* Jump */
+#define CMD_WR_REG 0x90000000 /* Write (load) register */
+#define CMD_RD_REG 0xa0000000 /* Read (store) register */
+#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */
+
+#define CMD_OAN MASK_27
+#define CMD_INV MASK_26
+#define CMD_SIG4 MASK_25
+#define CMD_SIG3 MASK_24
+#define CMD_SIG2 MASK_23
+#define CMD_SIG1 MASK_22
+#define CMD_SIG0 MASK_21
+#define CMD_O_FID_B MASK_14
+#define CMD_E_FID_B MASK_13
+#define CMD_O_FID_A MASK_12
+#define CMD_E_FID_A MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS (1<<15) // Source Line Threshold reached
+#define EVT_VBI_B (1<<9) // VSYNC Event
+#define RPS_OAN (1<<27) // 1: OR events, 0: AND events
+#define RPS_INV (1<<26) // Invert (compound) event
+#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00 0x00000001 /* Mask value for bit 0 */
+#define MASK_01 0x00000002 /* Mask value for bit 1 */
+#define MASK_02 0x00000004 /* Mask value for bit 2 */
+#define MASK_03 0x00000008 /* Mask value for bit 3 */
+#define MASK_04 0x00000010 /* Mask value for bit 4 */
+#define MASK_05 0x00000020 /* Mask value for bit 5 */
+#define MASK_06 0x00000040 /* Mask value for bit 6 */
+#define MASK_07 0x00000080 /* Mask value for bit 7 */
+#define MASK_08 0x00000100 /* Mask value for bit 8 */
+#define MASK_09 0x00000200 /* Mask value for bit 9 */
+#define MASK_10 0x00000400 /* Mask value for bit 10 */
+#define MASK_11 0x00000800 /* Mask value for bit 11 */
+#define MASK_12 0x00001000 /* Mask value for bit 12 */
+#define MASK_13 0x00002000 /* Mask value for bit 13 */
+#define MASK_14 0x00004000 /* Mask value for bit 14 */
+#define MASK_15 0x00008000 /* Mask value for bit 15 */
+#define MASK_16 0x00010000 /* Mask value for bit 16 */
+#define MASK_17 0x00020000 /* Mask value for bit 17 */
+#define MASK_18 0x00040000 /* Mask value for bit 18 */
+#define MASK_19 0x00080000 /* Mask value for bit 19 */
+#define MASK_20 0x00100000 /* Mask value for bit 20 */
+#define MASK_21 0x00200000 /* Mask value for bit 21 */
+#define MASK_22 0x00400000 /* Mask value for bit 22 */
+#define MASK_23 0x00800000 /* Mask value for bit 23 */
+#define MASK_24 0x01000000 /* Mask value for bit 24 */
+#define MASK_25 0x02000000 /* Mask value for bit 25 */
+#define MASK_26 0x04000000 /* Mask value for bit 26 */
+#define MASK_27 0x08000000 /* Mask value for bit 27 */
+#define MASK_28 0x10000000 /* Mask value for bit 28 */
+#define MASK_29 0x20000000 /* Mask value for bit 29 */
+#define MASK_30 0x40000000 /* Mask value for bit 30 */
+#define MASK_31 0x80000000 /* Mask value for bit 31 */
+
+#define MASK_B0 0x000000ff /* Mask value for byte 0 */
+#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */
+#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */
+#define MASK_B3 0xff000000 /* Mask value for byte 3 */
+
+#define MASK_W0 0x0000ffff /* Mask value for word 0 */
+#define MASK_W1 0xffff0000 /* Mask value for word 1 */
+
+#define MASK_PA 0xfffffffc /* Mask value for physical address */
+#define MASK_PR 0xfffffffe /* Mask value for protection register */
+#define MASK_ER 0xffffffff /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000 /* No mask */
+
+/* register aliases */
+#define BASE_ODD1 0x00 /* Video DMA 1 registers */
+#define BASE_EVEN1 0x04
+#define PROT_ADDR1 0x08
+#define PITCH1 0x0C
+#define BASE_PAGE1 0x10 /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1 0x14
+
+#define BASE_ODD2 0x18 /* Video DMA 2 registers */
+#define BASE_EVEN2 0x1C
+#define PROT_ADDR2 0x20
+#define PITCH2 0x24
+#define BASE_PAGE2 0x28 /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2 0x2C
+
+#define BASE_ODD3 0x30 /* Video DMA 3 registers */
+#define BASE_EVEN3 0x34
+#define PROT_ADDR3 0x38
+#define PITCH3 0x3C
+#define BASE_PAGE3 0x40 /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3 0x44
+
+#define PCI_BT_V1 0x48 /* Video/FIFO 1 */
+#define PCI_BT_V2 0x49 /* Video/FIFO 2 */
+#define PCI_BT_V3 0x4A /* Video/FIFO 3 */
+#define PCI_BT_DEBI 0x4B /* DEBI */
+#define PCI_BT_A 0x4C /* Audio */
+
+#define DD1_INIT 0x50 /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */
+#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */
+
+#define BRS_CTRL 0x58 /* BRS control register */
+#define HPS_CTRL 0x5C /* HPS control register */
+#define HPS_V_SCALE 0x60 /* HPS vertical scale */
+#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */
+#define HPS_H_SCALE 0x6C /* HPS horizontal scale */
+#define BCS_CTRL 0x70 /* BCS control */
+#define CHROMA_KEY_RANGE 0x74
+#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG 0x7C
+#define DEBI_COMMAND 0x80
+#define DEBI_PAGE 0x84
+#define DEBI_AD 0x88
+
+#define I2C_TRANSFER 0x8C
+#define I2C_STATUS 0x90
+
+#define BASE_A1_IN 0x94 /* Audio 1 input DMA */
+#define PROT_A1_IN 0x98
+#define PAGE_A1_IN 0x9C
+
+#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */
+#define PROT_A1_OUT 0xA4
+#define PAGE_A1_OUT 0xA8
+
+#define BASE_A2_IN 0xAC /* Audio 2 input DMA */
+#define PROT_A2_IN 0xB0
+#define PAGE_A2_IN 0xB4
+
+#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */
+#define PROT_A2_OUT 0xBC
+#define PAGE_A2_OUT 0xC0
+
+#define RPS_PAGE0 0xC4 /* RPS task 0 page register */
+#define RPS_PAGE1 0xC8 /* RPS task 1 page register */
+
+#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */
+#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */
+
+#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */
+#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */
+
+#define IER 0xDC /* Interrupt enable register */
+
+#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */
+
+#define EC1SSR 0xE4 /* Event cnt set 1 source select */
+#define EC2SSR 0xE8 /* Event cnt set 2 source select */
+#define ECT1R 0xEC /* Event cnt set 1 thresholds */
+#define ECT2R 0xF0 /* Event cnt set 2 thresholds */
+
+#define ACON1 0xF4
+#define ACON2 0xF8
+
+#define MC1 0xFC /* Main control register 1 */
+#define MC2 0x100 /* Main control register 2 */
+
+#define RPS_ADDR0 0x104 /* RPS task 0 address register */
+#define RPS_ADDR1 0x108 /* RPS task 1 address register */
+
+#define ISR 0x10C /* Interrupt status register */
+#define PSR 0x110 /* Primary status register */
+#define SSR 0x114 /* Secondary status register */
+
+#define EC1R 0x118 /* Event counter set 1 register */
+#define EC2R 0x11C /* Event counter set 2 register */
+
+#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */
+
+#define LEVEL_REP 0x140,
+#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */
+#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF 0x80000000 /* PCI parity error */
+#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */
+#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */
+#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */
+#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */
+#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */
+#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */
+#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */
+#define SPCI_UPLD 0x00100000 /* RPS in upload */
+#define SPCI_DEBI_S 0x00080000 /* DEBI status */
+#define SPCI_DEBI_E 0x00040000 /* DEBI error */
+#define SPCI_IIC_S 0x00020000 /* I2C status */
+#define SPCI_IIC_E 0x00010000 /* I2C error */
+#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */
+#define SPCI_V_PE 0x00000400 /* Video protection address */
+#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */
+#define SPCI_FIDA 0x00000100 /* Field ID video port A */
+#define SPCI_FIDB 0x00000080 /* Field ID video port B */
+#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */
+#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */
+#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */
+#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */
+#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S 0x00000002 /* Event counter 3 */
+#define SPCI_EC0S 0x00000001 /* Event counter 0 */
+
+/* i2c */
+#define SAA7146_I2C_ABORT (1<<7)
+#define SAA7146_I2C_SPERR (1<<6)
+#define SAA7146_I2C_APERR (1<<5)
+#define SAA7146_I2C_DTERR (1<<4)
+#define SAA7146_I2C_DRERR (1<<3)
+#define SAA7146_I2C_AL (1<<2)
+#define SAA7146_I2C_ERR (1<<1)
+#define SAA7146_I2C_BUSY (1<<0)
+
+#define SAA7146_I2C_START (0x3)
+#define SAA7146_I2C_CONT (0x2)
+#define SAA7146_I2C_STOP (0x1)
+#define SAA7146_I2C_NOP (0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300)
+
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) | y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+#endif
diff --git a/include/media/drv-intf/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h
new file mode 100644
index 0000000..6f80fb7
--- /dev/null
+++ b/include/media/drv-intf/saa7146_vv.h
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146_VV__
+#define __SAA7146_VV__
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/drv-intf/saa7146.h>
+#include <media/videobuf-dma-sg.h>
+
+#define MAX_SAA7146_CAPTURE_BUFFERS 32 /* arbitrary */
+#define BUFFER_TIMEOUT (HZ/2) /* 0.5 seconds */
+
+#define WRITE_RPS0(x) do { \
+ dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
+ } while (0);
+
+#define WRITE_RPS1(x) do { \
+ dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
+ } while (0);
+
+struct saa7146_video_dma {
+ u32 base_odd;
+ u32 base_even;
+ u32 prot_addr;
+ u32 pitch;
+ u32 base_page;
+ u32 num_line_byte;
+};
+
+#define FORMAT_BYTE_SWAP 0x1
+#define FORMAT_IS_PLANAR 0x2
+
+struct saa7146_format {
+ char *name;
+ u32 pixelformat;
+ u32 trans;
+ u8 depth;
+ u8 flags;
+ u8 swap;
+};
+
+struct saa7146_standard
+{
+ char *name;
+ v4l2_std_id id;
+
+ int v_offset; /* number of lines of vertical offset before processing */
+ int v_field; /* number of lines in a field for HPS to process */
+
+ int h_offset; /* horizontal offset of processing window */
+ int h_pixels; /* number of horizontal pixels to process */
+
+ int v_max_out;
+ int h_max_out;
+};
+
+/* buffer for one video/vbi frame */
+struct saa7146_buf {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ /* saa7146 specific */
+ struct v4l2_pix_format *fmt;
+ int (*activate)(struct saa7146_dev *dev,
+ struct saa7146_buf *buf,
+ struct saa7146_buf *next);
+
+ /* page tables */
+ struct saa7146_pgtable pt[3];
+};
+
+struct saa7146_dmaqueue {
+ struct saa7146_dev *dev;
+ struct saa7146_buf *curr;
+ struct list_head queue;
+ struct timer_list timeout;
+};
+
+struct saa7146_overlay {
+ struct saa7146_fh *fh;
+ struct v4l2_window win;
+ struct v4l2_clip clips[16];
+ int nclips;
+};
+
+/* per open data */
+struct saa7146_fh {
+ /* Must be the first field! */
+ struct v4l2_fh fh;
+ struct saa7146_dev *dev;
+
+ /* video capture */
+ struct videobuf_queue video_q;
+
+ /* vbi capture */
+ struct videobuf_queue vbi_q;
+
+ unsigned int resources; /* resource management for device open */
+};
+
+#define STATUS_OVERLAY 0x01
+#define STATUS_CAPTURE 0x02
+
+struct saa7146_vv
+{
+ /* vbi capture */
+ struct saa7146_dmaqueue vbi_dmaq;
+ struct v4l2_vbi_format vbi_fmt;
+ struct timer_list vbi_read_timeout;
+ struct file *vbi_read_timeout_file;
+ /* vbi workaround interrupt queue */
+ wait_queue_head_t vbi_wq;
+ int vbi_fieldcount;
+ struct saa7146_fh *vbi_streaming;
+
+ int video_status;
+ struct saa7146_fh *video_fh;
+
+ /* video overlay */
+ struct saa7146_overlay ov;
+ struct v4l2_framebuffer ov_fb;
+ struct saa7146_format *ov_fmt;
+ struct saa7146_fh *ov_suspend;
+
+ /* video capture */
+ struct saa7146_dmaqueue video_dmaq;
+ struct v4l2_pix_format video_fmt;
+ enum v4l2_field last_field;
+
+ /* common: fixme? shouldn't this be in saa7146_fh?
+ (this leads to a more complicated question: shall the driver
+ store the different settings (for example S_INPUT) for every open
+ and restore it appropriately, or should all settings be common for
+ all opens? currently, we do the latter, like all other
+ drivers do... */
+ struct saa7146_standard *standard;
+
+ int vflip;
+ int hflip;
+ int current_hps_source;
+ int current_hps_sync;
+
+ struct saa7146_dma d_clipping; /* pointer to clipping memory */
+
+ unsigned int resources; /* resource management for device */
+};
+
+/* flags */
+#define SAA7146_USE_PORT_B_FOR_VBI 0x2 /* use input port b for vbi hardware bug workaround */
+
+struct saa7146_ext_vv
+{
+ /* informations about the video capabilities of the device */
+ int inputs;
+ int audios;
+ u32 capabilities;
+ int flags;
+
+ /* additionally supported transmission standards */
+ struct saa7146_standard *stds;
+ int num_stds;
+ int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
+
+ /* the extension can override this */
+ struct v4l2_ioctl_ops vid_ops;
+ struct v4l2_ioctl_ops vbi_ops;
+ /* pointer to the saa7146 core ops */
+ const struct v4l2_ioctl_ops *core_ops;
+
+ struct v4l2_file_operations vbi_fops;
+};
+
+struct saa7146_use_ops {
+ void (*init)(struct saa7146_dev *, struct saa7146_vv *);
+ int(*open)(struct saa7146_dev *, struct file *);
+ void (*release)(struct saa7146_dev *, struct file *);
+ void (*irq_done)(struct saa7146_dev *, unsigned long status);
+ ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
+};
+
+/* from saa7146_fops.c */
+int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
+int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
+void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
+void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
+int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
+void saa7146_buffer_timeout(struct timer_list *t);
+void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
+ struct saa7146_buf *buf);
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
+int saa7146_vv_release(struct saa7146_dev* dev);
+
+/* from saa7146_hlp.c */
+int saa7146_enable_overlay(struct saa7146_fh *fh);
+void saa7146_disable_overlay(struct saa7146_fh *fh);
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
+void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
+
+/* from saa7146_video.c */
+extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
+extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
+extern const struct saa7146_use_ops saa7146_video_uops;
+int saa7146_start_preview(struct saa7146_fh *fh);
+int saa7146_stop_preview(struct saa7146_fh *fh);
+long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
+
+/* from saa7146_vbi.c */
+extern const struct saa7146_use_ops saa7146_vbi_uops;
+
+/* resource management functions */
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
+
+#define RESOURCE_DMA1_HPS 0x1
+#define RESOURCE_DMA2_CLP 0x2
+#define RESOURCE_DMA3_BRS 0x4
+
+/* saa7146 source inputs */
+#define SAA7146_HPS_SOURCE_PORT_A 0x00
+#define SAA7146_HPS_SOURCE_PORT_B 0x01
+#define SAA7146_HPS_SOURCE_YPB_CPA 0x02
+#define SAA7146_HPS_SOURCE_YPA_CPB 0x03
+
+/* sync inputs */
+#define SAA7146_HPS_SYNC_PORT_A 0x00
+#define SAA7146_HPS_SYNC_PORT_B 0x01
+
+/* some memory sizes */
+/* max. 16 clipping rectangles */
+#define SAA7146_CLIPPING_MEM (16 * 4 * sizeof(u32))
+
+/* some defines for the various clipping-modes */
+#define SAA7146_CLIPPING_RECT 0x4
+#define SAA7146_CLIPPING_RECT_INVERTED 0x5
+#define SAA7146_CLIPPING_MASK 0x6
+#define SAA7146_CLIPPING_MASK_INVERTED 0x7
+
+/* output formats: each entry holds four informations */
+#define RGB08_COMPOSED 0x0217 /* composed is used in the sense of "not-planar" */
+/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
+#define RGB15_COMPOSED 0x0213
+#define RGB16_COMPOSED 0x0210
+#define RGB24_COMPOSED 0x0201
+#define RGB32_COMPOSED 0x0202
+
+#define Y8 0x0006
+#define YUV411_COMPOSED 0x0003
+#define YUV422_COMPOSED 0x0000
+/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
+#define YUV411_DECOMPOSED 0x100b
+#define YUV422_DECOMPOSED 0x1009
+#define YUV420_DECOMPOSED 0x100a
+
+#define IS_PLANAR(x) (x & 0xf000)
+
+/* misc defines */
+#define SAA7146_NO_SWAP (0x0)
+#define SAA7146_TWO_BYTE_SWAP (0x1)
+#define SAA7146_FOUR_BYTE_SWAP (0x2)
+
+#endif
diff --git a/include/media/drv-intf/sh_mobile_ceu.h b/include/media/drv-intf/sh_mobile_ceu.h
new file mode 100644
index 0000000..555f0ec
--- /dev/null
+++ b/include/media/drv-intf/sh_mobile_ceu.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_MOBILE_CEU_H__
+#define __ASM_SH_MOBILE_CEU_H__
+
+#define SH_CEU_FLAG_USE_8BIT_BUS (1 << 0) /* use 8bit bus width */
+#define SH_CEU_FLAG_USE_16BIT_BUS (1 << 1) /* use 16bit bus width */
+#define SH_CEU_FLAG_HSYNC_LOW (1 << 2) /* default High if possible */
+#define SH_CEU_FLAG_VSYNC_LOW (1 << 3) /* default High if possible */
+#define SH_CEU_FLAG_LOWER_8BIT (1 << 4) /* default upper 8bit */
+
+struct device;
+struct resource;
+
+struct sh_mobile_ceu_companion {
+ u32 num_resources;
+ struct resource *resource;
+ int id;
+ void *platform_data;
+};
+
+struct sh_mobile_ceu_info {
+ unsigned long flags;
+ int max_width;
+ int max_height;
+ struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */
+ unsigned int *asd_sizes; /* 0-terminated array pf asd group sizes */
+};
+
+#endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/drv-intf/sh_vou.h b/include/media/drv-intf/sh_vou.h
new file mode 100644
index 0000000..ec3ba9a
--- /dev/null
+++ b/include/media/drv-intf/sh_vou.h
@@ -0,0 +1,33 @@
+/*
+ * SuperH Video Output Unit (VOU) driver header
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_VOU_H
+#define SH_VOU_H
+
+#include <linux/i2c.h>
+
+/* Bus flags */
+#define SH_VOU_PCLK_FALLING (1 << 0)
+#define SH_VOU_HSYNC_LOW (1 << 1)
+#define SH_VOU_VSYNC_LOW (1 << 2)
+
+enum sh_vou_bus_fmt {
+ SH_VOU_BUS_8BIT,
+ SH_VOU_BUS_16BIT,
+ SH_VOU_BUS_BT656,
+};
+
+struct sh_vou_pdata {
+ enum sh_vou_bus_fmt bus_fmt;
+ int i2c_adap;
+ struct i2c_board_info *board_info;
+ unsigned long flags;
+};
+
+#endif
diff --git a/include/media/drv-intf/si476x.h b/include/media/drv-intf/si476x.h
new file mode 100644
index 0000000..ad87fa8
--- /dev/null
+++ b/include/media/drv-intf/si476x.h
@@ -0,0 +1,37 @@
+/*
+ * include/media/drv-intf/si476x.h -- Common definitions for si476x driver
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_H
+#define SI476X_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+#include <linux/mfd/si476x-reports.h>
+
+enum si476x_ctrl_id {
+ V4L2_CID_SI476X_RSSI_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 1),
+ V4L2_CID_SI476X_SNR_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 2),
+ V4L2_CID_SI476X_MAX_TUNE_ERROR = (V4L2_CID_USER_SI476X_BASE + 3),
+ V4L2_CID_SI476X_HARMONICS_COUNT = (V4L2_CID_USER_SI476X_BASE + 4),
+ V4L2_CID_SI476X_DIVERSITY_MODE = (V4L2_CID_USER_SI476X_BASE + 5),
+ V4L2_CID_SI476X_INTERCHIP_LINK = (V4L2_CID_USER_SI476X_BASE + 6),
+};
+
+#endif /* SI476X_H*/
diff --git a/include/media/drv-intf/soc_mediabus.h b/include/media/drv-intf/soc_mediabus.h
new file mode 100644
index 0000000..2ff7737
--- /dev/null
+++ b/include/media/drv-intf/soc_mediabus.h
@@ -0,0 +1,112 @@
+/*
+ * SoC-camera Media Bus API extensions
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SOC_MEDIABUS_H
+#define SOC_MEDIABUS_H
+
+#include <linux/videodev2.h>
+#include <linux/v4l2-mediabus.h>
+
+/**
+ * enum soc_mbus_packing - data packing types on the media-bus
+ * @SOC_MBUS_PACKING_NONE: no packing, bit-for-bit transfer to RAM, one
+ * sample represents one pixel
+ * @SOC_MBUS_PACKING_2X8_PADHI: 16 bits transferred in 2 8-bit samples, in the
+ * possibly incomplete byte high bits are padding
+ * @SOC_MBUS_PACKING_2X8_PADLO: as above, but low bits are padding
+ * @SOC_MBUS_PACKING_EXTEND16: sample width (e.g., 10 bits) has to be extended
+ * to 16 bits
+ * @SOC_MBUS_PACKING_VARIABLE: compressed formats with variable packing
+ * @SOC_MBUS_PACKING_1_5X8: used for packed YUV 4:2:0 formats, where 4
+ * pixels occupy 6 bytes in RAM
+ * @SOC_MBUS_PACKING_EXTEND32: sample width (e.g., 24 bits) has to be extended
+ * to 32 bits
+ */
+enum soc_mbus_packing {
+ SOC_MBUS_PACKING_NONE,
+ SOC_MBUS_PACKING_2X8_PADHI,
+ SOC_MBUS_PACKING_2X8_PADLO,
+ SOC_MBUS_PACKING_EXTEND16,
+ SOC_MBUS_PACKING_VARIABLE,
+ SOC_MBUS_PACKING_1_5X8,
+ SOC_MBUS_PACKING_EXTEND32,
+};
+
+/**
+ * enum soc_mbus_order - sample order on the media bus
+ * @SOC_MBUS_ORDER_LE: least significant sample first
+ * @SOC_MBUS_ORDER_BE: most significant sample first
+ */
+enum soc_mbus_order {
+ SOC_MBUS_ORDER_LE,
+ SOC_MBUS_ORDER_BE,
+};
+
+/**
+ * enum soc_mbus_layout - planes layout in memory
+ * @SOC_MBUS_LAYOUT_PACKED: color components packed
+ * @SOC_MBUS_LAYOUT_PLANAR_2Y_U_V: YUV components stored in 3 planes (4:2:2)
+ * @SOC_MBUS_LAYOUT_PLANAR_2Y_C: YUV components stored in a luma and a
+ * chroma plane (C plane is half the size
+ * of Y plane)
+ * @SOC_MBUS_LAYOUT_PLANAR_Y_C: YUV components stored in a luma and a
+ * chroma plane (C plane is the same size
+ * as Y plane)
+ */
+enum soc_mbus_layout {
+ SOC_MBUS_LAYOUT_PACKED = 0,
+ SOC_MBUS_LAYOUT_PLANAR_2Y_U_V,
+ SOC_MBUS_LAYOUT_PLANAR_2Y_C,
+ SOC_MBUS_LAYOUT_PLANAR_Y_C,
+};
+
+/**
+ * struct soc_mbus_pixelfmt - Data format on the media bus
+ * @name: Name of the format
+ * @fourcc: Fourcc code, that will be obtained if the data is
+ * stored in memory in the following way:
+ * @packing: Type of sample-packing, that has to be used
+ * @order: Sample order when storing in memory
+ * @bits_per_sample: How many bits the bridge has to sample
+ */
+struct soc_mbus_pixelfmt {
+ const char *name;
+ u32 fourcc;
+ enum soc_mbus_packing packing;
+ enum soc_mbus_order order;
+ enum soc_mbus_layout layout;
+ u8 bits_per_sample;
+};
+
+/**
+ * struct soc_mbus_lookup - Lookup FOURCC IDs by mediabus codes for pass-through
+ * @code: mediabus pixel-code
+ * @fmt: pixel format description
+ */
+struct soc_mbus_lookup {
+ u32 code;
+ struct soc_mbus_pixelfmt fmt;
+};
+
+const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc(
+ u32 code,
+ const struct soc_mbus_lookup *lookup,
+ int n);
+const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
+ u32 code);
+s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
+s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf,
+ u32 bytes_per_line, u32 height);
+int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
+ unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+ unsigned int flags);
+
+#endif
diff --git a/include/media/drv-intf/tea575x.h b/include/media/drv-intf/tea575x.h
new file mode 100644
index 0000000..ba49238
--- /dev/null
+++ b/include/media/drv-intf/tea575x.h
@@ -0,0 +1,80 @@
+#ifndef __SOUND_TEA575X_TUNER_H
+#define __SOUND_TEA575X_TUNER_H
+
+/*
+ * ALSA driver for TEA5757/5759 Philips AM/FM tuner chips
+ *
+ * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#define TEA575X_FMIF 10700
+#define TEA575X_AMIF 450
+
+#define TEA575X_DATA (1 << 0)
+#define TEA575X_CLK (1 << 1)
+#define TEA575X_WREN (1 << 2)
+#define TEA575X_MOST (1 << 3)
+
+struct snd_tea575x;
+
+struct snd_tea575x_ops {
+ /* Drivers using snd_tea575x must either define read_ and write_val */
+ void (*write_val)(struct snd_tea575x *tea, u32 val);
+ u32 (*read_val)(struct snd_tea575x *tea);
+ /* Or define the 3 pin functions */
+ void (*set_pins)(struct snd_tea575x *tea, u8 pins);
+ u8 (*get_pins)(struct snd_tea575x *tea);
+ void (*set_direction)(struct snd_tea575x *tea, bool output);
+};
+
+struct snd_tea575x {
+ struct v4l2_device *v4l2_dev;
+ struct v4l2_file_operations fops;
+ struct video_device vd; /* video device */
+ int radio_nr; /* radio_nr */
+ bool tea5759; /* 5759 chip is present */
+ bool has_am; /* Device can tune to AM freqs */
+ bool cannot_read_data; /* Device cannot read the data pin */
+ bool cannot_mute; /* Device cannot mute */
+ bool mute; /* Device is muted? */
+ bool stereo; /* receiving stereo */
+ bool tuned; /* tuned to a station */
+ unsigned int val; /* hw value */
+ u32 band; /* 0: FM, 1: FM-Japan, 2: AM */
+ u32 freq; /* frequency */
+ struct mutex mutex;
+ const struct snd_tea575x_ops *ops;
+ void *private_data;
+ u8 card[32];
+ u8 bus_info[32];
+ struct v4l2_ctrl_handler ctrl_handler;
+ int (*ext_init)(struct snd_tea575x *tea);
+};
+
+int snd_tea575x_enum_freq_bands(struct snd_tea575x *tea,
+ struct v4l2_frequency_band *band);
+int snd_tea575x_g_tuner(struct snd_tea575x *tea, struct v4l2_tuner *v);
+int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea,
+ const struct v4l2_hw_freq_seek *a);
+int snd_tea575x_hw_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
+void snd_tea575x_exit(struct snd_tea575x *tea);
+void snd_tea575x_set_freq(struct snd_tea575x *tea);
+
+#endif /* __SOUND_TEA575X_TUNER_H */