v4.19.13 snapshot.
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
new file mode 100644
index 0000000..7e7fbfb
--- /dev/null
+++ b/include/linux/usb/tcpm.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_TCPM_H
+#define __LINUX_USB_TCPM_H
+
+#include <linux/bitops.h>
+#include <linux/usb/typec.h>
+#include "pd.h"
+
+enum typec_cc_status {
+ TYPEC_CC_OPEN,
+ TYPEC_CC_RA,
+ TYPEC_CC_RD,
+ TYPEC_CC_RP_DEF,
+ TYPEC_CC_RP_1_5,
+ TYPEC_CC_RP_3_0,
+};
+
+enum typec_cc_polarity {
+ TYPEC_POLARITY_CC1,
+ TYPEC_POLARITY_CC2,
+};
+
+/* Time to wait for TCPC to complete transmit */
+#define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */
+#define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10)
+#define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10)
+
+enum tcpm_transmit_status {
+ TCPC_TX_SUCCESS = 0,
+ TCPC_TX_DISCARDED = 1,
+ TCPC_TX_FAILED = 2,
+};
+
+enum tcpm_transmit_type {
+ TCPC_TX_SOP = 0,
+ TCPC_TX_SOP_PRIME = 1,
+ TCPC_TX_SOP_PRIME_PRIME = 2,
+ TCPC_TX_SOP_DEBUG_PRIME = 3,
+ TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4,
+ TCPC_TX_HARD_RESET = 5,
+ TCPC_TX_CABLE_RESET = 6,
+ TCPC_TX_BIST_MODE_2 = 7
+};
+
+/**
+ * struct tcpc_config - Port configuration
+ * @src_pdo: PDO parameters sent to port partner as response to
+ * PD_CTRL_GET_SOURCE_CAP message
+ * @nr_src_pdo: Number of entries in @src_pdo
+ * @snk_pdo: PDO parameters sent to partner as response to
+ * PD_CTRL_GET_SINK_CAP message
+ * @nr_snk_pdo: Number of entries in @snk_pdo
+ * @operating_snk_mw:
+ * Required operating sink power in mW
+ * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or
+ * TYPEC_PORT_DRP)
+ * @default_role:
+ * Default port role (TYPEC_SINK or TYPEC_SOURCE).
+ * Set to TYPEC_NO_PREFERRED_ROLE if no default role.
+ * @try_role_hw:True if try.{Src,Snk} is implemented in hardware
+ * @alt_modes: List of supported alternate modes
+ */
+struct tcpc_config {
+ const u32 *src_pdo;
+ unsigned int nr_src_pdo;
+
+ const u32 *snk_pdo;
+ unsigned int nr_snk_pdo;
+
+ const u32 *snk_vdo;
+ unsigned int nr_snk_vdo;
+
+ unsigned int operating_snk_mw;
+
+ enum typec_port_type type;
+ enum typec_port_data data;
+ enum typec_role default_role;
+ bool try_role_hw; /* try.{src,snk} implemented in hardware */
+
+ const struct typec_altmode_desc *alt_modes;
+};
+
+/* Mux state attributes */
+#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */
+#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */
+#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */
+
+/**
+ * struct tcpc_dev - Port configuration and callback functions
+ * @config: Pointer to port configuration
+ * @fwnode: Pointer to port fwnode
+ * @get_vbus: Called to read current VBUS state
+ * @get_current_limit:
+ * Optional; called by the tcpm core when configured as a snk
+ * and cc=Rp-def. This allows the tcpm to provide a fallback
+ * current-limit detection method for the cc=Rp-def case.
+ * For example, some tcpcs may include BC1.2 charger detection
+ * and use that in this case.
+ * @set_cc: Called to set value of CC pins
+ * @get_cc: Called to read current CC pin values
+ * @set_polarity:
+ * Called to set polarity
+ * @set_vconn: Called to enable or disable VCONN
+ * @set_vbus: Called to enable or disable VBUS
+ * @set_current_limit:
+ * Optional; called to set current limit as negotiated
+ * with partner.
+ * @set_pd_rx: Called to enable or disable reception of PD messages
+ * @set_roles: Called to set power and data roles
+ * @start_drp_toggling:
+ * Optional; if supported by hardware, called to start DRP
+ * toggling. DRP toggling is stopped automatically if
+ * a connection is established.
+ * @try_role: Optional; called to set a preferred role
+ * @pd_transmit:Called to transmit PD message
+ * @mux: Pointer to multiplexer data
+ */
+struct tcpc_dev {
+ const struct tcpc_config *config;
+ struct fwnode_handle *fwnode;
+
+ int (*init)(struct tcpc_dev *dev);
+ int (*get_vbus)(struct tcpc_dev *dev);
+ int (*get_current_limit)(struct tcpc_dev *dev);
+ int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
+ int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
+ enum typec_cc_status *cc2);
+ int (*set_polarity)(struct tcpc_dev *dev,
+ enum typec_cc_polarity polarity);
+ int (*set_vconn)(struct tcpc_dev *dev, bool on);
+ int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge);
+ int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv);
+ int (*set_pd_rx)(struct tcpc_dev *dev, bool on);
+ int (*set_roles)(struct tcpc_dev *dev, bool attached,
+ enum typec_role role, enum typec_data_role data);
+ int (*start_drp_toggling)(struct tcpc_dev *dev,
+ enum typec_cc_status cc);
+ int (*try_role)(struct tcpc_dev *dev, int role);
+ int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
+ const struct pd_message *msg);
+};
+
+struct tcpm_port;
+
+struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
+void tcpm_unregister_port(struct tcpm_port *port);
+
+int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
+ unsigned int nr_pdo);
+int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
+ unsigned int nr_pdo,
+ unsigned int operating_snk_mw);
+
+void tcpm_vbus_change(struct tcpm_port *port);
+void tcpm_cc_change(struct tcpm_port *port);
+void tcpm_pd_receive(struct tcpm_port *port,
+ const struct pd_message *msg);
+void tcpm_pd_transmit_complete(struct tcpm_port *port,
+ enum tcpm_transmit_status status);
+void tcpm_pd_hard_reset(struct tcpm_port *port);
+void tcpm_tcpc_reset(struct tcpm_port *port);
+
+#endif /* __LINUX_USB_TCPM_H */