v4.19.13 snapshot.
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h
new file mode 100644
index 0000000..dedb3b2
--- /dev/null
+++ b/include/linux/usb/isp1301.h
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_ISP1301_H
+#define __LINUX_USB_ISP1301_H
+
+#include <linux/of.h>
+
+/* I2C Register definitions: */
+
+#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG (1 << 0)
+#define MC1_SUSPEND_REG (1 << 1)
+#define MC1_DAT_SE0 (1 << 2)
+#define MC1_TRANSPARENT (1 << 3)
+#define MC1_BDIS_ACON_EN (1 << 4)
+#define MC1_OE_INT_EN (1 << 5)
+#define MC1_UART_EN (1 << 6)
+#define MC1_MASK 0x7f
+
+#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN (1 << 0)
+#define MC2_SPD_SUSP_CTRL (1 << 1)
+#define MC2_BI_DI (1 << 2)
+#define MC2_TRANSP_BDIR0 (1 << 3)
+#define MC2_TRANSP_BDIR1 (1 << 4)
+#define MC2_AUDIO_EN (1 << 5)
+#define MC2_PSW_EN (1 << 6)
+#define MC2_EN2V7 (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
+
+#define OTG1_DP_PULLUP (1 << 0)
+#define OTG1_DM_PULLUP (1 << 1)
+#define OTG1_DP_PULLDOWN (1 << 2)
+#define OTG1_DM_PULLDOWN (1 << 3)
+#define OTG1_ID_PULLDOWN (1 << 4)
+#define OTG1_VBUS_DRV (1 << 5)
+#define OTG1_VBUS_DISCHRG (1 << 6)
+#define OTG1_VBUS_CHRG (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
+
+#define OTG_B_SESS_END (1 << 6)
+#define OTG_B_SESS_VLD (1 << 7)
+
+#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
+#define ISP1301_I2C_INTERRUPT_LATCH 0xA
+#define ISP1301_I2C_INTERRUPT_FALLING 0xC
+#define ISP1301_I2C_INTERRUPT_RISING 0xE
+
+#define INT_VBUS_VLD (1 << 0)
+#define INT_SESS_VLD (1 << 1)
+#define INT_DP_HI (1 << 2)
+#define INT_ID_GND (1 << 3)
+#define INT_DM_HI (1 << 4)
+#define INT_ID_FLOAT (1 << 5)
+#define INT_BDIS_ACON (1 << 6)
+#define INT_CR_INT (1 << 7)
+
+#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
+
+struct i2c_client *isp1301_get_client(struct device_node *node);
+
+#endif /* __LINUX_USB_ISP1301_H */