v4.19.13 snapshot.
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
new file mode 100644
index 0000000..c06daf3
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -0,0 +1,476 @@
+/*
+ * Copyright ST-Ericsson 2012.
+ *
+ * Author: Arun Murthy <arun.murthy@stericsson.com>
+ * Licensed under GPLv2.
+ */
+
+#ifndef _AB8500_BM_H
+#define _AB8500_BM_H
+
+#include <linux/kernel.h>
+#include <linux/mfd/abx500.h>
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB8500_MAIN_WDOG_CTRL_REG 0x01
+#define AB8500_LOW_BAT_REG 0x03
+#define AB8500_BATT_OK_REG 0x04
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_LINE_CTRL2_REG 0x82
+#define AB8500_USB_LINK1_STAT_REG 0x94
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_STATUS1_REG 0x00
+#define AB8500_CH_STATUS2_REG 0x01
+#define AB8500_CH_USBCH_STAT1_REG 0x02
+#define AB8500_CH_USBCH_STAT2_REG 0x03
+#define AB8540_CH_USBCH_STAT3_REG 0x04
+#define AB8500_CH_STAT_REG 0x05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_VOLT_LVL_REG 0x40
+#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/
+#define AB8500_CH_OPT_CRNTLVL_REG 0x42
+#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/
+#define AB8500_CH_WD_TIMER_REG 0x50
+#define AB8500_CHARG_WD_CTRL 0x51
+#define AB8500_BTEMP_HIGH_TH 0x52
+#define AB8500_LED_INDICATOR_PWM_CTRL 0x53
+#define AB8500_LED_INDICATOR_PWM_DUTY 0x54
+#define AB8500_BATT_OVV 0x55
+#define AB8500_CHARGER_CTRL 0x56
+#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/
+
+/*
+ * Charger / main control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_MCH_CTRL1 0x80
+#define AB8500_MCH_CTRL2 0x81
+#define AB8500_MCH_IPT_CURLVL_REG 0x82
+#define AB8500_CH_WD_REG 0x83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_USBCH_CTRL1_REG 0xC0
+#define AB8500_USBCH_CTRL2_REG 0xC1
+#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2
+#define AB8540_USB_PP_MODE_REG 0xC5
+#define AB8540_USB_PP_CHR_REG 0xC6
+
+/*
+ * Gas Gauge register offsets
+ * Bank : 0x0C
+ */
+#define AB8500_GASG_CC_CTRL_REG 0x00
+#define AB8500_GASG_CC_ACCU1_REG 0x01
+#define AB8500_GASG_CC_ACCU2_REG 0x02
+#define AB8500_GASG_CC_ACCU3_REG 0x03
+#define AB8500_GASG_CC_ACCU4_REG 0x04
+#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05
+#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06
+#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07
+#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08
+#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09
+#define AB8500_GASG_CC_OFFSET_REG 0x0A
+#define AB8500_GASG_CC_NCOV_ACCU 0x10
+#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11
+#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12
+#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13
+#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE2_REG 0x01
+#define AB8500_IT_SOURCE21_REG 0x14
+
+/*
+ * RTC register offsets
+ * Bank: 0x0F
+ */
+#define AB8500_RTC_BACKUP_CHG_REG 0x0C
+#define AB8500_RTC_CC_CONF_REG 0x01
+#define AB8500_RTC_CTRL_REG 0x0B
+#define AB8500_RTC_CTRL1_REG 0x11
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_OTP_CONF_15 0x0E
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define ADC_RESOLUTION 1024
+#define ADC_CH_MAIN_MIN 0
+#define ADC_CH_MAIN_MAX 20030
+#define ADC_CH_VBUS_MIN 0
+#define ADC_CH_VBUS_MAX 20030
+#define ADC_CH_VBAT_MIN 2300
+#define ADC_CH_VBAT_MAX 4800
+#define ADC_CH_BKBAT_MIN 0
+#define ADC_CH_BKBAT_MAX 3200
+
+/* Main charge i/p current */
+#define MAIN_CH_IP_CUR_0P9A 0x80
+#define MAIN_CH_IP_CUR_1P0A 0x90
+#define MAIN_CH_IP_CUR_1P1A 0xA0
+#define MAIN_CH_IP_CUR_1P2A 0xB0
+#define MAIN_CH_IP_CUR_1P3A 0xC0
+#define MAIN_CH_IP_CUR_1P4A 0xD0
+#define MAIN_CH_IP_CUR_1P5A 0xE0
+
+/* ChVoltLevel */
+#define CH_VOL_LVL_3P5 0x00
+#define CH_VOL_LVL_4P0 0x14
+#define CH_VOL_LVL_4P05 0x16
+#define CH_VOL_LVL_4P1 0x1B
+#define CH_VOL_LVL_4P15 0x20
+#define CH_VOL_LVL_4P2 0x25
+#define CH_VOL_LVL_4P6 0x4D
+
+/* ChOutputCurrentLevel */
+#define CH_OP_CUR_LVL_0P1 0x00
+#define CH_OP_CUR_LVL_0P2 0x01
+#define CH_OP_CUR_LVL_0P3 0x02
+#define CH_OP_CUR_LVL_0P4 0x03
+#define CH_OP_CUR_LVL_0P5 0x04
+#define CH_OP_CUR_LVL_0P6 0x05
+#define CH_OP_CUR_LVL_0P7 0x06
+#define CH_OP_CUR_LVL_0P8 0x07
+#define CH_OP_CUR_LVL_0P9 0x08
+#define CH_OP_CUR_LVL_1P4 0x0D
+#define CH_OP_CUR_LVL_1P5 0x0E
+#define CH_OP_CUR_LVL_1P6 0x0F
+#define CH_OP_CUR_LVL_2P 0x3F
+
+/* BTEMP High thermal limits */
+#define BTEMP_HIGH_TH_57_0 0x00
+#define BTEMP_HIGH_TH_52 0x01
+#define BTEMP_HIGH_TH_57_1 0x02
+#define BTEMP_HIGH_TH_62 0x03
+
+/* current is mA */
+#define USB_0P1A 100
+#define USB_0P2A 200
+#define USB_0P3A 300
+#define USB_0P4A 400
+#define USB_0P5A 500
+
+#define LOW_BAT_3P1V 0x20
+#define LOW_BAT_2P3V 0x00
+#define LOW_BAT_RESET 0x01
+#define LOW_BAT_ENABLE 0x01
+
+/* Backup battery constants */
+#define BUP_ICH_SEL_50UA 0x00
+#define BUP_ICH_SEL_150UA 0x04
+#define BUP_ICH_SEL_300UA 0x08
+#define BUP_ICH_SEL_700UA 0x0C
+
+enum bup_vch_sel {
+ BUP_VCH_SEL_2P5V,
+ BUP_VCH_SEL_2P6V,
+ BUP_VCH_SEL_2P8V,
+ BUP_VCH_SEL_3P1V,
+ /*
+ * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
+ * are only available on ab8540. You can't choose these 5
+ * voltage on ab8500/ab8505/ab9540.
+ */
+ BUP_VCH_SEL_2P7V,
+ BUP_VCH_SEL_2P9V,
+ BUP_VCH_SEL_3P0V,
+ BUP_VCH_SEL_3P2V,
+ BUP_VCH_SEL_3P3V,
+};
+
+#define BUP_VCH_RANGE 0x02
+#define VBUP33_VRTCN 0x01
+
+/* Battery OVV constants */
+#define BATT_OVV_ENA 0x02
+#define BATT_OVV_TH_3P7 0x00
+#define BATT_OVV_TH_4P75 0x01
+
+/* A value to indicate over voltage */
+#define BATT_OVV_VALUE 4750
+
+/* VBUS OVV constants */
+#define VBUS_OVV_SELECT_MASK 0x78
+#define VBUS_OVV_SELECT_5P6V 0x00
+#define VBUS_OVV_SELECT_5P7V 0x08
+#define VBUS_OVV_SELECT_5P8V 0x10
+#define VBUS_OVV_SELECT_5P9V 0x18
+#define VBUS_OVV_SELECT_6P0V 0x20
+#define VBUS_OVV_SELECT_6P1V 0x28
+#define VBUS_OVV_SELECT_6P2V 0x30
+#define VBUS_OVV_SELECT_6P3V 0x38
+
+#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04
+
+/* Fuel Gauge constants */
+#define RESET_ACCU 0x02
+#define READ_REQ 0x01
+#define CC_DEEP_SLEEP_ENA 0x02
+#define CC_PWR_UP_ENA 0x01
+#define CC_SAMPLES_40 0x28
+#define RD_NCONV_ACCU_REQ 0x01
+#define CC_CALIB 0x08
+#define CC_INTAVGOFFSET_ENA 0x10
+#define CC_MUXOFFSET 0x80
+#define CC_INT_CAL_N_AVG_MASK 0x60
+#define CC_INT_CAL_SAMPLES_16 0x40
+#define CC_INT_CAL_SAMPLES_8 0x20
+#define CC_INT_CAL_SAMPLES_4 0x00
+
+/* RTC constants */
+#define RTC_BUP_CH_ENA 0x10
+
+/* BatCtrl Current Source Constants */
+#define BAT_CTRL_7U_ENA 0x01
+#define BAT_CTRL_20U_ENA 0x02
+#define BAT_CTRL_18U_ENA 0x01
+#define BAT_CTRL_16U_ENA 0x02
+#define BAT_CTRL_CMP_ENA 0x04
+#define FORCE_BAT_CTRL_CMP_HIGH 0x08
+#define BAT_CTRL_PULL_UP_ENA 0x10
+
+/* Battery type */
+#define BATTERY_UNKNOWN 00
+
+/* Registers for pcut feature in ab8505 and ab9540 */
+#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12
+#define AB8505_RTC_PCUT_TIME_REG 0x13
+#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14
+#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15
+#define AB8505_RTC_PCUT_RESTART_REG 0x16
+#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17
+
+/* USB Power Path constants for ab8540 */
+#define BUS_VSYS_VOL_SELECT_MASK 0x06
+#define BUS_VSYS_VOL_SELECT_3P6V 0x00
+#define BUS_VSYS_VOL_SELECT_3P325V 0x02
+#define BUS_VSYS_VOL_SELECT_3P9V 0x04
+#define BUS_VSYS_VOL_SELECT_4P3V 0x06
+#define BUS_POWER_PATH_MODE_ENA 0x01
+#define BUS_PP_PRECHG_CURRENT_MASK 0x0E
+#define BUS_POWER_PATH_PRECHG_ENA 0x01
+
+/**
+ * struct res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp: battery pack temperature in Celsius
+ * @resist: NTC resistor net total resistance
+ */
+struct res_to_temp {
+ int temp;
+ int resist;
+};
+
+/**
+ * struct batres_vs_temp - defines one point in a temp vs battery internal
+ * resistance curve.
+ * @temp: battery pack temperature in Celsius
+ * @resist: battery internal reistance in mOhm
+ */
+struct batres_vs_temp {
+ int temp;
+ int resist;
+};
+
+/* Forward declaration */
+struct ab8500_fg;
+
+/**
+ * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer: Time between measurements while recovering
+ * @recovery_total_time: Total recovery time
+ * @init_timer: Measurement interval during startup
+ * @init_discard_time: Time we discard voltage measurement at startup
+ * @init_total_time: Total init time during startup
+ * @high_curr_time: Time current has to be high to go to recovery
+ * @accu_charging: FG accumulation time while charging
+ * @accu_high_curr: FG accumulation time in high current mode
+ * @high_curr_threshold: High current threshold, in mA
+ * @lowbat_threshold: Low battery threshold, in mV
+ * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0
+ * Resolution in 50 mV step.
+ * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1
+ * Resolution in 50 mV step.
+ * @user_cap_limit Capacity reported from user must be within this
+ * limit to be considered as sane, in percentage
+ * points.
+ * @maint_thres This is the threshold where we stop reporting
+ * battery full while in maintenance, in per cent
+ * @pcut_enable: Enable power cut feature in ab8505
+ * @pcut_max_time: Max time threshold
+ * @pcut_flag_time: Flagtime threshold
+ * @pcut_max_restart: Max number of restarts
+ * @pcut_debunce_time: Sets battery debounce time
+ */
+struct ab8500_fg_parameters {
+ int recovery_sleep_timer;
+ int recovery_total_time;
+ int init_timer;
+ int init_discard_time;
+ int init_total_time;
+ int high_curr_time;
+ int accu_charging;
+ int accu_high_curr;
+ int high_curr_threshold;
+ int lowbat_threshold;
+ int battok_falling_th_sel0;
+ int battok_raising_th_sel1;
+ int user_cap_limit;
+ int maint_thres;
+ bool pcut_enable;
+ u8 pcut_max_time;
+ u8 pcut_flag_time;
+ u8 pcut_max_restart;
+ u8 pcut_debunce_time;
+};
+
+/**
+ * struct ab8500_charger_maximization - struct used by the board config.
+ * @use_maxi: Enable maximization for this battery type
+ * @maxi_chg_curr: Maximum charger current allowed
+ * @maxi_wait_cycles: cycles to wait before setting charger current
+ * @charger_curr_step delta between two charger current settings (mA)
+ */
+struct ab8500_maxim_parameters {
+ bool ena_maxi;
+ int chg_curr;
+ int wait_cycles;
+ int charger_curr_step;
+};
+
+/**
+ * struct ab8500_bm_capacity_levels - ab8500 capacity level data
+ * @critical: critical capacity level in percent
+ * @low: low capacity level in percent
+ * @normal: normal capacity level in percent
+ * @high: high capacity level in percent
+ * @full: full capacity level in percent
+ */
+struct ab8500_bm_capacity_levels {
+ int critical;
+ int low;
+ int normal;
+ int high;
+ int full;
+};
+
+/**
+ * struct ab8500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max: maximum allowed USB charger voltage in mV
+ * @usb_curr_max: maximum allowed USB charger current in mA
+ * @ac_volt_max: maximum allowed AC charger voltage in mV
+ * @ac_curr_max: maximum allowed AC charger current in mA
+ */
+struct ab8500_bm_charger_parameters {
+ int usb_volt_max;
+ int usb_curr_max;
+ int ac_volt_max;
+ int ac_curr_max;
+};
+
+/**
+ * struct ab8500_bm_data - ab8500 battery management data
+ * @temp_under under this temp, charging is stopped
+ * @temp_low between this temp and temp_under charging is reduced
+ * @temp_high between this temp and temp_over charging is reduced
+ * @temp_over over this temp, charging is stopped
+ * @temp_interval_chg temperature measurement interval in s when charging
+ * @temp_interval_nochg temperature measurement interval in s when not charging
+ * @main_safety_tmr_h safety timer for main charger
+ * @usb_safety_tmr_h safety timer for usb charger
+ * @bkup_bat_v voltage which we charge the backup battery with
+ * @bkup_bat_i current which we charge the backup battery with
+ * @no_maintenance indicates that maintenance charging is disabled
+ * @capacity_scaling indicates whether capacity scaling is to be used
+ * @adc_therm placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat flag to enable charging of unknown batteries
+ * @enable_overshoot flag to enable VBAT overshoot control
+ * @fg_res resistance of FG resistor in 0.1mOhm
+ * @n_btypes number of elements in array bat_type
+ * @batt_id index of the identified battery in array bat_type
+ * @interval_charging charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis temperature hysteresis
+ * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm)
+ * @maxi: maximization parameters
+ * @cap_levels capacity in percent for the different capacity levels
+ * @bat_type table of supported battery types
+ * @chg_params charger parameters
+ * @fg_params fuel gauge parameters
+ */
+struct ab8500_bm_data {
+ int temp_under;
+ int temp_low;
+ int temp_high;
+ int temp_over;
+ int temp_interval_chg;
+ int temp_interval_nochg;
+ int main_safety_tmr_h;
+ int usb_safety_tmr_h;
+ int bkup_bat_v;
+ int bkup_bat_i;
+ bool no_maintenance;
+ bool capacity_scaling;
+ bool chg_unknown_bat;
+ bool enable_overshoot;
+ enum abx500_adc_therm adc_therm;
+ int fg_res;
+ int n_btypes;
+ int batt_id;
+ int interval_charging;
+ int interval_not_charging;
+ int temp_hysteresis;
+ int gnd_lift_resistance;
+ const struct ab8500_maxim_parameters *maxi;
+ const struct ab8500_bm_capacity_levels *cap_levels;
+ const struct ab8500_bm_charger_parameters *chg_params;
+ const struct ab8500_fg_parameters *fg_params;
+};
+
+struct ab8500_btemp;
+struct ab8500_gpadc;
+struct ab8500_fg;
+
+#ifdef CONFIG_AB8500_BM
+extern struct abx500_bm_data ab8500_bm_data;
+
+void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
+struct ab8500_btemp *ab8500_btemp_get(void);
+int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
+int ab8500_btemp_get_temp(struct ab8500_btemp *btemp);
+struct ab8500_fg *ab8500_fg_get(void);
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
+
+#else
+static struct abx500_bm_data ab8500_bm_data;
+#endif
+#endif /* _AB8500_BM_H */
diff --git a/include/linux/mfd/abx500/ab8500-codec.h b/include/linux/mfd/abx500/ab8500-codec.h
new file mode 100644
index 0000000..d707941
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-codec.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Ola Lilja <ola.o.lilja@stericsson.com>
+ * for ST-Ericsson.
+ *
+ * License terms:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef AB8500_CORE_CODEC_H
+#define AB8500_CORE_CODEC_H
+
+/* Mic-types */
+enum amic_type {
+ AMIC_TYPE_SINGLE_ENDED,
+ AMIC_TYPE_DIFFERENTIAL
+};
+
+/* Mic-biases */
+enum amic_micbias {
+ AMIC_MICBIAS_VAMIC1,
+ AMIC_MICBIAS_VAMIC2,
+ AMIC_MICBIAS_UNKNOWN
+};
+
+/* Bias-voltage */
+enum ear_cm_voltage {
+ EAR_CMV_0_95V,
+ EAR_CMV_1_10V,
+ EAR_CMV_1_27V,
+ EAR_CMV_1_58V,
+ EAR_CMV_UNKNOWN
+};
+
+/* Analog microphone settings */
+struct amic_settings {
+ enum amic_type mic1_type;
+ enum amic_type mic2_type;
+ enum amic_micbias mic1a_micbias;
+ enum amic_micbias mic1b_micbias;
+ enum amic_micbias mic2_micbias;
+};
+
+/* Platform data structure for the audio-parts of the AB8500 */
+struct ab8500_codec_platform_data {
+ struct amic_settings amics;
+ enum ear_cm_voltage ear_cmv;
+};
+
+#endif
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
new file mode 100644
index 0000000..49ded00
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-gpadc.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson SA
+ * Licensed under GPLv2.
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
+ */
+
+#ifndef _AB8500_GPADC_H
+#define _AB8500_GPADC_H
+
+/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
+ * and ADCHwSel[4:0] in GPADCCtrl3 ) */
+#define BAT_CTRL 0x01
+#define BTEMP_BALL 0x02
+#define MAIN_CHARGER_V 0x03
+#define ACC_DETECT1 0x04
+#define ACC_DETECT2 0x05
+#define ADC_AUX1 0x06
+#define ADC_AUX2 0x07
+#define MAIN_BAT_V 0x08
+#define VBUS_V 0x09
+#define MAIN_CHARGER_C 0x0A
+#define USB_CHARGER_C 0x0B
+#define BK_BAT_V 0x0C
+#define DIE_TEMP 0x0D
+#define USB_ID 0x0E
+#define XTAL_TEMP 0x12
+#define VBAT_TRUE_MEAS 0x13
+#define BAT_CTRL_AND_IBAT 0x1C
+#define VBAT_MEAS_AND_IBAT 0x1D
+#define VBAT_TRUE_MEAS_AND_IBAT 0x1E
+#define BAT_TEMP_AND_IBAT 0x1F
+
+/* Virtual channel used only for ibat convertion to ampere
+ * Battery current conversion (ibat) cannot be requested as a single conversion
+ * but it is always in combination with other input requests
+ */
+#define IBAT_VIRTUAL_CHANNEL 0xFF
+
+#define SAMPLE_1 1
+#define SAMPLE_4 4
+#define SAMPLE_8 8
+#define SAMPLE_16 16
+#define RISING_EDGE 0
+#define FALLING_EDGE 1
+
+/* Arbitrary ADC conversion type constants */
+#define ADC_SW 0
+#define ADC_HW 1
+
+struct ab8500_gpadc;
+
+struct ab8500_gpadc *ab8500_gpadc_get(char *name);
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ return ab8500_gpadc_sw_hw_convert(gpadc, channel,
+ SAMPLE_16, 0, 0, ADC_SW);
+}
+
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+ int *ibat);
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+ u8 channel, int ad_value);
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+ u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+ u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h);
+
+#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
new file mode 100644
index 0000000..01024d1
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __AB8500_SYSCTRL_H
+#define __AB8500_SYSCTRL_H
+
+#include <linux/bitops.h>
+
+#ifdef CONFIG_AB8500_CORE
+
+int ab8500_sysctrl_read(u16 reg, u8 *value);
+int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
+
+#else
+
+static inline int ab8500_sysctrl_read(u16 reg, u8 *value)
+{
+ return 0;
+}
+
+static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
+{
+ return 0;
+}
+
+#endif /* CONFIG_AB8500_CORE */
+
+static inline int ab8500_sysctrl_set(u16 reg, u8 bits)
+{
+ return ab8500_sysctrl_write(reg, bits, bits);
+}
+
+static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
+{
+ return ab8500_sysctrl_write(reg, bits, 0);
+}
+
+/* Registers */
+#define AB8500_TURNONSTATUS 0x100
+#define AB8500_RESETSTATUS 0x101
+#define AB8500_PONKEY1PRESSSTATUS 0x102
+#define AB8500_SYSCLKREQSTATUS 0x142
+#define AB8500_STW4500CTRL1 0x180
+#define AB8500_STW4500CTRL2 0x181
+#define AB8500_STW4500CTRL3 0x200
+#define AB8500_MAINWDOGCTRL 0x201
+#define AB8500_MAINWDOGTIMER 0x202
+#define AB8500_LOWBAT 0x203
+#define AB8500_BATTOK 0x204
+#define AB8500_SYSCLKTIMER 0x205
+#define AB8500_SMPSCLKCTRL 0x206
+#define AB8500_SMPSCLKSEL1 0x207
+#define AB8500_SMPSCLKSEL2 0x208
+#define AB8500_SMPSCLKSEL3 0x209
+#define AB8500_SYSULPCLKCONF 0x20A
+#define AB8500_SYSULPCLKCTRL1 0x20B
+#define AB8500_SYSCLKCTRL 0x20C
+#define AB8500_SYSCLKREQ1VALID 0x20D
+#define AB8500_SYSTEMCTRLSUP 0x20F
+#define AB8500_SYSCLKREQ1RFCLKBUF 0x210
+#define AB8500_SYSCLKREQ2RFCLKBUF 0x211
+#define AB8500_SYSCLKREQ3RFCLKBUF 0x212
+#define AB8500_SYSCLKREQ4RFCLKBUF 0x213
+#define AB8500_SYSCLKREQ5RFCLKBUF 0x214
+#define AB8500_SYSCLKREQ6RFCLKBUF 0x215
+#define AB8500_SYSCLKREQ7RFCLKBUF 0x216
+#define AB8500_SYSCLKREQ8RFCLKBUF 0x217
+#define AB8500_DITHERCLKCTRL 0x220
+#define AB8500_SWATCTRL 0x230
+#define AB8500_HIQCLKCTRL 0x232
+#define AB8500_VSIMSYSCLKCTRL 0x233
+#define AB9540_SYSCLK12BUFCTRL 0x234
+#define AB9540_SYSCLK12CONFCTRL 0x235
+#define AB9540_SYSCLK12BUFCTRL2 0x236
+#define AB9540_SYSCLK12BUF1VALID 0x237
+#define AB9540_SYSCLK12BUF2VALID 0x238
+#define AB9540_SYSCLK12BUF3VALID 0x239
+#define AB9540_SYSCLK12BUF4VALID 0x23A
+
+/* Bits */
+#define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
+#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1)
+#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2)
+#define AB8500_TURNONSTATUS_RTCALARM BIT(3)
+#define AB8500_TURNONSTATUS_MAINCHDET BIT(4)
+#define AB8500_TURNONSTATUS_VBUSDET BIT(5)
+#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6)
+
+#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0)
+#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2)
+
+#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F
+#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0
+
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7)
+
+#define AB8500_STW4500CTRL1_SWOFF BIT(0)
+#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1)
+#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2)
+
+#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0)
+#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1)
+#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2)
+#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6)
+#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7)
+
+#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0)
+#define AB8500_STW4500CTRL3_RESETAUDN BIT(1)
+#define AB8500_STW4500CTRL3_RESETDENCN BIT(2)
+#define AB8500_STW4500CTRL3_THSDENA BIT(3)
+
+#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0)
+#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1)
+#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4)
+
+#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F
+#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0
+
+#define AB8500_LOWBAT_LOWBATENA BIT(0)
+#define AB8500_LOWBAT_LOWBAT_MASK 0x7E
+#define AB8500_LOWBAT_LOWBAT_SHIFT 1
+
+#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F
+#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0
+#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0
+#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4
+
+#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F
+#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0
+#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0
+#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4
+
+#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03
+#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0
+#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2)
+
+#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3
+
+#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3
+
+#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3
+
+#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03
+#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0
+#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2)
+#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3)
+#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4)
+#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5)
+#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6)
+#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7)
+
+#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03
+#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0
+#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2)
+#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3)
+#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7)
+
+#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0)
+#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1)
+#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2)
+
+#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0)
+#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1)
+#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2)
+
+#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03
+#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0
+#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C
+#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2
+#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4)
+
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4)
+
+#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0)
+#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1)
+#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2)
+#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3)
+#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4)
+#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5)
+#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0
+#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6
+
+#define AB8500_SWATCTRL_UPDATERF BIT(0)
+#define AB8500_SWATCTRL_SWATENABLE BIT(1)
+#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C
+#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2
+#define AB8500_SWATCTRL_SWATBIT5 BIT(6)
+
+#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7)
+
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
+
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
+
+#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL0 BIT(2)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL1 BIT(3)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
+
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
+
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+
+#define AB8500_ENABLE_WD 0x1
+#define AB8500_KICK_WD 0x2
+#define AB8500_WD_RESTART_ON_EXPIRE 0x10
+
+#endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
new file mode 100644
index 0000000..d33c245
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -0,0 +1,518 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/atomic.h>
+#include <linux/mutex.h>
+#include <linux/irqdomain.h>
+
+struct device;
+
+/*
+ * AB IC versions
+ *
+ * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
+ * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
+ * print of version string.
+ */
+enum ab8500_version {
+ AB8500_VERSION_AB8500 = 0x0,
+ AB8500_VERSION_AB8505 = 0x1,
+ AB8500_VERSION_AB9540 = 0x2,
+ AB8500_VERSION_AB8540 = 0x4,
+ AB8500_VERSION_UNDEFINED,
+};
+
+/* AB8500 CIDs*/
+#define AB8500_CUTEARLY 0x00
+#define AB8500_CUT1P0 0x10
+#define AB8500_CUT1P1 0x11
+#define AB8500_CUT1P2 0x12 /* Only valid for AB8540 */
+#define AB8500_CUT2P0 0x20
+#define AB8500_CUT3P0 0x30
+#define AB8500_CUT3P3 0x33
+
+/*
+ * AB8500 bank addresses
+ */
+#define AB8500_M_FSM_RANK 0x0
+#define AB8500_SYS_CTRL1_BLOCK 0x1
+#define AB8500_SYS_CTRL2_BLOCK 0x2
+#define AB8500_REGU_CTRL1 0x3
+#define AB8500_REGU_CTRL2 0x4
+#define AB8500_USB 0x5
+#define AB8500_TVOUT 0x6
+#define AB8500_DBI 0x7
+#define AB8500_ECI_AV_ACC 0x8
+#define AB8500_RESERVED 0x9
+#define AB8500_GPADC 0xA
+#define AB8500_CHARGER 0xB
+#define AB8500_GAS_GAUGE 0xC
+#define AB8500_AUDIO 0xD
+#define AB8500_INTERRUPT 0xE
+#define AB8500_RTC 0xF
+#define AB8500_MISC 0x10
+#define AB8500_DEVELOPMENT 0x11
+#define AB8500_DEBUG 0x12
+#define AB8500_PROD_TEST 0x13
+#define AB8500_STE_TEST 0x14
+#define AB8500_OTP_EMUL 0x15
+
+#define AB8500_DEBUG_FIELD_LAST 0x16
+
+/*
+ * Interrupts
+ * Values used to index into array ab8500_irq_regoffset[] defined in
+ * drivers/mdf/ab8500-core.c
+ */
+/* Definitions for AB8500, AB9540 and AB8540 */
+/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540/8540 */
+#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540/8540 */
+#define AB8500_INT_TEMP_WARM 3
+#define AB8500_INT_PON_KEY2DB_F 4
+#define AB8500_INT_PON_KEY2DB_R 5
+#define AB8500_INT_PON_KEY1DB_F 6
+#define AB8500_INT_PON_KEY1DB_R 7
+/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
+#define AB8500_INT_BATT_OVV 8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505/8540 */
+#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505/8540 */
+#define AB8500_INT_VBUS_DET_F 14
+#define AB8500_INT_VBUS_DET_R 15
+/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
+#define AB8500_INT_VBUS_CH_DROP_END 16
+#define AB8500_INT_RTC_60S 17
+#define AB8500_INT_RTC_ALARM 18
+#define AB8540_INT_BIF_INT 19
+#define AB8500_INT_BAT_CTRL_INDB 20
+#define AB8500_INT_CH_WD_EXP 21
+#define AB8500_INT_VBUS_OVV 22
+#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540/8540 */
+/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
+#define AB8500_INT_CCN_CONV_ACC 24
+#define AB8500_INT_INT_AUD 25
+#define AB8500_INT_CCEOC 26
+#define AB8500_INT_CC_INT_CALIB 27
+#define AB8500_INT_LOW_BAT_F 28
+#define AB8500_INT_LOW_BAT_R 29
+#define AB8500_INT_BUP_CHG_NOT_OK 30
+#define AB8500_INT_BUP_CHG_OK 31
+/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
+#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505/8540 */
+#define AB8500_INT_ACC_DETECT_1DB_F 33
+#define AB8500_INT_ACC_DETECT_1DB_R 34
+#define AB8500_INT_ACC_DETECT_22DB_F 35
+#define AB8500_INT_ACC_DETECT_22DB_R 36
+#define AB8500_INT_ACC_DETECT_21DB_F 37
+#define AB8500_INT_ACC_DETECT_21DB_R 38
+#define AB8500_INT_GP_SW_ADC_CONV_END 39
+/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
+#define AB8500_INT_GPIO6R 40 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO7R 41 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO8R 42 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO9R 43 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO10R 44 /* not 8540 */
+#define AB8500_INT_GPIO11R 45 /* not 8540 */
+#define AB8500_INT_GPIO12R 46 /* not 8505/8540 */
+#define AB8500_INT_GPIO13R 47 /* not 8540 */
+/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
+#define AB8500_INT_GPIO24R 48 /* not 8505/8540 */
+#define AB8500_INT_GPIO25R 49 /* not 8505/8540 */
+#define AB8500_INT_GPIO36R 50 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37R 51 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38R 52 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39R 53 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40R 54 /* not 8540 */
+#define AB8500_INT_GPIO41R 55 /* not 8540 */
+/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
+#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */
+#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */
+#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */
+#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */
+#define AB8500_INT_GPIO10F 60
+#define AB8500_INT_GPIO11F 61
+#define AB8500_INT_GPIO12F 62 /* not 8505 */
+#define AB8500_INT_GPIO13F 63
+/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
+#define AB8500_INT_GPIO24F 64 /* not 8505/8540 */
+#define AB8500_INT_GPIO25F 65 /* not 8505/8540 */
+#define AB8500_INT_GPIO36F 66 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37F 67 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38F 68 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39F 69 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40F 70 /* not 8540 */
+#define AB8500_INT_GPIO41F 71 /* not 8540 */
+/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
+#define AB8500_INT_ADP_SOURCE_ERROR 72
+#define AB8500_INT_ADP_SINK_ERROR 73
+#define AB8500_INT_ADP_PROBE_PLUG 74
+#define AB8500_INT_ADP_PROBE_UNPLUG 75
+#define AB8500_INT_ADP_SENSE_OFF 76
+#define AB8500_INT_USB_PHY_POWER_ERR 78
+#define AB8500_INT_USB_LINK_STATUS 79
+/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
+#define AB8500_INT_BTEMP_LOW 80
+#define AB8500_INT_BTEMP_LOW_MEDIUM 81
+#define AB8500_INT_BTEMP_MEDIUM_HIGH 82
+#define AB8500_INT_BTEMP_HIGH 83
+/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
+#define AB8500_INT_SRP_DETECT 88
+#define AB8500_INT_USB_CHARGER_NOT_OKR 89
+#define AB8500_INT_ID_WAKEUP_R 90
+#define AB8500_INT_ID_DET_PLUGR 91 /* 8505/9540 cut2.0 */
+#define AB8500_INT_ID_DET_R1R 92
+#define AB8500_INT_ID_DET_R2R 93
+#define AB8500_INT_ID_DET_R3R 94
+#define AB8500_INT_ID_DET_R4R 95
+/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
+#define AB8500_INT_ID_WAKEUP_F 96 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_PLUGF 97 /* 8505/9540 cut2.0 */
+#define AB8500_INT_ID_DET_R1F 98 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R2F 99 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R3F 100 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R4F 101 /* not 8505/9540 */
+#define AB8500_INT_CHAUTORESTARTAFTSEC 102 /* not 8505/9540 */
+#define AB8500_INT_CHSTOPBYSEC 103
+/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
+#define AB8500_INT_USB_CH_TH_PROT_F 104
+#define AB8500_INT_USB_CH_TH_PROT_R 105
+#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */
+#define AB8500_INT_CHCURLIMNOHSCHIRP 109
+#define AB8500_INT_CHCURLIMHSCHIRP 110
+#define AB8500_INT_XTAL32K_KO 111
+
+/* Definitions for AB9540 / AB8505 */
+/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
+#define AB9540_INT_GPIO50R 113 /* not 8540 */
+#define AB9540_INT_GPIO51R 114 /* not 8505/8540 */
+#define AB9540_INT_GPIO52R 115 /* not 8540 */
+#define AB9540_INT_GPIO53R 116 /* not 8540 */
+#define AB9540_INT_GPIO54R 117 /* not 8505/8540 */
+#define AB9540_INT_IEXT_CH_RF_BFN_R 118
+/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
+#define AB9540_INT_GPIO50F 121 /* not 8540 */
+#define AB9540_INT_GPIO51F 122 /* not 8505/8540 */
+#define AB9540_INT_GPIO52F 123 /* not 8540 */
+#define AB9540_INT_GPIO53F 124 /* not 8540 */
+#define AB9540_INT_GPIO54F 125 /* not 8505/8540 */
+#define AB9540_INT_IEXT_CH_RF_BFN_F 126
+/* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */
+#define AB8505_INT_KEYSTUCK 128
+#define AB8505_INT_IKR 129
+#define AB8505_INT_IKP 130
+#define AB8505_INT_KP 131
+#define AB8505_INT_KEYDEGLITCH 132
+#define AB8505_INT_MODPWRSTATUSF 134
+#define AB8505_INT_MODPWRSTATUSR 135
+/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */
+#define AB8500_INT_HOOK_DET_NEG_F 138
+#define AB8500_INT_HOOK_DET_NEG_R 139
+#define AB8500_INT_HOOK_DET_POS_F 140
+#define AB8500_INT_HOOK_DET_POS_R 141
+#define AB8500_INT_PLUG_DET_COMP_F 142
+#define AB8500_INT_PLUG_DET_COMP_R 143
+/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */
+#define AB8505_INT_COLL 144
+#define AB8505_INT_RESERR 145
+#define AB8505_INT_FRAERR 146
+#define AB8505_INT_COMERR 147
+#define AB8505_INT_SPDSET 148
+#define AB8505_INT_DSENT 149
+#define AB8505_INT_DREC 150
+#define AB8505_INT_ACC_INT 151
+/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */
+#define AB8505_INT_NOPINT 152
+/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */
+#define AB8540_INT_IDPLUGDETCOMPF 160
+#define AB8540_INT_IDPLUGDETCOMPR 161
+#define AB8540_INT_FMDETCOMPLOF 162
+#define AB8540_INT_FMDETCOMPLOR 163
+#define AB8540_INT_FMDETCOMPHIF 164
+#define AB8540_INT_FMDETCOMPHIR 165
+#define AB8540_INT_ID5VDETCOMPF 166
+#define AB8540_INT_ID5VDETCOMPR 167
+/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */
+#define AB8540_INT_GPIO43F 168
+#define AB8540_INT_GPIO43R 169
+#define AB8540_INT_GPIO44F 170
+#define AB8540_INT_GPIO44R 171
+#define AB8540_INT_KEYPOSDETCOMPF 172
+#define AB8540_INT_KEYPOSDETCOMPR 173
+#define AB8540_INT_KEYNEGDETCOMPF 174
+#define AB8540_INT_KEYNEGDETCOMPR 175
+/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */
+#define AB8540_INT_GPIO1VBATF 176
+#define AB8540_INT_GPIO1VBATR 177
+#define AB8540_INT_GPIO2VBATF 178
+#define AB8540_INT_GPIO2VBATR 179
+#define AB8540_INT_GPIO3VBATF 180
+#define AB8540_INT_GPIO3VBATR 181
+#define AB8540_INT_GPIO4VBATF 182
+#define AB8540_INT_GPIO4VBATR 183
+/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */
+#define AB8540_INT_SYSCLKREQ2F 184
+#define AB8540_INT_SYSCLKREQ2R 185
+#define AB8540_INT_SYSCLKREQ3F 186
+#define AB8540_INT_SYSCLKREQ3R 187
+#define AB8540_INT_SYSCLKREQ4F 188
+#define AB8540_INT_SYSCLKREQ4R 189
+#define AB8540_INT_SYSCLKREQ5F 190
+#define AB8540_INT_SYSCLKREQ5R 191
+/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */
+#define AB8540_INT_PWMOUT1F 192
+#define AB8540_INT_PWMOUT1R 193
+#define AB8540_INT_PWMCTRL0F 194
+#define AB8540_INT_PWMCTRL0R 195
+#define AB8540_INT_PWMCTRL1F 196
+#define AB8540_INT_PWMCTRL1R 197
+#define AB8540_INT_SYSCLKREQ6F 198
+#define AB8540_INT_SYSCLKREQ6R 199
+/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */
+#define AB8540_INT_PWMEXTVIBRA1F 200
+#define AB8540_INT_PWMEXTVIBRA1R 201
+#define AB8540_INT_PWMEXTVIBRA2F 202
+#define AB8540_INT_PWMEXTVIBRA2R 203
+#define AB8540_INT_PWMOUT2F 204
+#define AB8540_INT_PWMOUT2R 205
+#define AB8540_INT_PWMOUT3F 206
+#define AB8540_INT_PWMOUT3R 207
+/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */
+#define AB8540_INT_ADDATA2F 208
+#define AB8540_INT_ADDATA2R 209
+#define AB8540_INT_DADATA2F 210
+#define AB8540_INT_DADATA2R 211
+#define AB8540_INT_FSYNC2F 212
+#define AB8540_INT_FSYNC2R 213
+#define AB8540_INT_BITCLK2F 214
+#define AB8540_INT_BITCLK2R 215
+/* ab8540_irq_regoffset[27] -> IT[Source|Latch|Mask]33 */
+#define AB8540_INT_RTC_1S 216
+
+/*
+ * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
+ * entire platform. This is a "compile time" constant so this must be set to
+ * the largest possible value that may be encountered with different AB SOCs.
+ * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
+ * which is larger.
+ */
+#define AB8500_NR_IRQS 112
+#define AB8505_NR_IRQS 153
+#define AB9540_NR_IRQS 153
+#define AB8540_NR_IRQS 216
+/* This is set to the roof of any AB8500 chip variant IRQ counts */
+#define AB8500_MAX_NR_IRQS AB8540_NR_IRQS
+
+#define AB8500_NUM_IRQ_REGS 14
+#define AB9540_NUM_IRQ_REGS 20
+#define AB8540_NUM_IRQ_REGS 27
+
+/* Turn On Status Event */
+#define AB8500_POR_ON_VBAT 0x01
+#define AB8500_POW_KEY_1_ON 0x02
+#define AB8500_POW_KEY_2_ON 0x04
+#define AB8500_RTC_ALARM 0x08
+#define AB8500_MAIN_CH_DET 0x10
+#define AB8500_VBUS_DET 0x20
+#define AB8500_USB_ID_DET 0x40
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @transfer_ongoing: 0 if no transfer ongoing
+ * @irq: irq line
+ * @irq_domain: irq domain
+ * @version: chip version id (e.g. ab8500 or ab9540)
+ * @chip_id: chip revision id
+ * @write: register write
+ * @write_masked: masked register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ * @mask_size: Actual number of valid entries in mask[], oldmask[] and
+ * irq_reg_offset
+ * @irq_reg_offset: Array of offsets into IRQ registers
+ */
+struct ab8500 {
+ struct device *dev;
+ struct mutex lock;
+ struct mutex irq_lock;
+ atomic_t transfer_ongoing;
+ int irq;
+ struct irq_domain *domain;
+ enum ab8500_version version;
+ u8 chip_id;
+
+ int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
+ int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
+ int (*read)(struct ab8500 *ab8500, u16 addr);
+
+ unsigned long tx_buf[4];
+ unsigned long rx_buf[4];
+
+ u8 *mask;
+ u8 *oldmask;
+ int mask_size;
+ const int *irq_reg_offset;
+ int it_latchhier_num;
+};
+
+struct ab8500_regulator_platform_data;
+struct ab8500_codec_platform_data;
+struct ab8500_sysctrl_platform_data;
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ * @regulator: machine-specific constraints for regulators
+ */
+struct ab8500_platform_data {
+ void (*init) (struct ab8500 *);
+ struct ab8500_regulator_platform_data *regulator;
+ struct ab8500_codec_platform_data *codec;
+ struct ab8500_sysctrl_platform_data *sysctrl;
+};
+
+extern int ab8500_init(struct ab8500 *ab8500,
+ enum ab8500_version version);
+extern int ab8500_exit(struct ab8500 *ab8500);
+
+extern int ab8500_suspend(struct ab8500 *ab8500);
+
+static inline int is_ab8500(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8500;
+}
+
+static inline int is_ab8505(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8505;
+}
+
+static inline int is_ab9540(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB9540;
+}
+
+static inline int is_ab8540(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8540;
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
+}
+
+static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab8505_2p0(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab9540_2p0(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+/*
+ * Be careful, the marketing name for this chip is 2.1
+ * but the value read from the chip is 3.0 (0x30)
+ */
+static inline int is_ab9540_3p0(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0));
+}
+
+static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0);
+}
+
+static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1);
+}
+
+static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2);
+}
+
+static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0);
+}
+
+static inline int is_ab8540_2p0(struct ab8500 *ab)
+{
+ return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0);
+}
+
+static inline int is_ab8505_2p0_earlier(struct ab8500 *ab)
+{
+ return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
+void ab8500_override_turn_on_stat(u8 mask, u8 set);
+
+#ifdef CONFIG_AB8500_DEBUG
+extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+void ab8500_dump_all_banks(struct device *dev);
+void ab8500_debug_register_interrupt(int line);
+#else
+static inline void ab8500_dump_all_banks(struct device *dev) {}
+static inline void ab8500_debug_register_interrupt(int line) {}
+#endif
+
+#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
new file mode 100644
index 0000000..669894f
--- /dev/null
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _UX500_CHARGALG_H
+#define _UX500_CHARGALG_H
+
+#include <linux/power_supply.h>
+
+/*
+ * Valid only for supplies of type:
+ * - POWER_SUPPLY_TYPE_MAINS,
+ * - POWER_SUPPLY_TYPE_USB,
+ * because only them store as drv_data pointer to struct ux500_charger.
+ */
+#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+ int (*enable) (struct ux500_charger *, int, int, int);
+ int (*check_enable) (struct ux500_charger *, int, int);
+ int (*kick_wd) (struct ux500_charger *);
+ int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy power supply base class
+ * @ops ux500 charger operations
+ * @max_out_volt maximum output charger voltage in mV
+ * @max_out_curr maximum output charger current in mA
+ * @enabled indicates if this charger is used or not
+ * @external external charger unit (pm2xxx)
+ */
+struct ux500_charger {
+ struct power_supply *psy;
+ struct ux500_charger_ops ops;
+ int max_out_volt;
+ int max_out_curr;
+ int wdt_refresh;
+ bool enabled;
+ bool external;
+};
+
+extern struct blocking_notifier_head charger_notifier_list;
+
+#endif