v4.19.13 snapshot.
diff --git a/include/linux/irqchip/irq-bcm2836.h b/include/linux/irqchip/irq-bcm2836.h
new file mode 100644
index 0000000..218a6e1
--- /dev/null
+++ b/include/linux/irqchip/irq-bcm2836.h
@@ -0,0 +1,70 @@
+/*
+ * Root interrupt controller for the BCM2836 (Raspberry Pi 2).
+ *
+ * Copyright 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define LOCAL_CONTROL 0x000
+#define LOCAL_PRESCALER 0x008
+
+/*
+ * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
+ * next 2 bits identify the CPU that the GPU FIQ goes to.
+ */
+#define LOCAL_GPU_ROUTING 0x00c
+/* When setting bits 0-3, enables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_SET 0x010
+/* When setting bits 0-3, disables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_CLR 0x014
+/*
+ * The low 4 bits of this are the CPU's timer IRQ enables, and the
+ * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
+ * bits).
+ */
+#define LOCAL_TIMER_INT_CONTROL0 0x040
+/*
+ * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
+ * the next 4 bits are the CPU's per-mailbox FIQ enables (which
+ * override the IRQ bits).
+ */
+#define LOCAL_MAILBOX_INT_CONTROL0 0x050
+/*
+ * The CPU's interrupt status register. Bits are defined by the the
+ * LOCAL_IRQ_* bits below.
+ */
+#define LOCAL_IRQ_PENDING0 0x060
+/* Same status bits as above, but for FIQ. */
+#define LOCAL_FIQ_PENDING0 0x070
+/*
+ * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and
+ * these bits are organized by mailbox number and then CPU number. We
+ * use mailbox 0 for IPIs. The mailbox's interrupt is raised while
+ * any bit is set.
+ */
+#define LOCAL_MAILBOX0_SET0 0x080
+#define LOCAL_MAILBOX3_SET0 0x08c
+/* Mailbox write-to-clear bits. */
+#define LOCAL_MAILBOX0_CLR0 0x0c0
+#define LOCAL_MAILBOX3_CLR0 0x0cc
+
+#define LOCAL_IRQ_CNTPSIRQ 0
+#define LOCAL_IRQ_CNTPNSIRQ 1
+#define LOCAL_IRQ_CNTHPIRQ 2
+#define LOCAL_IRQ_CNTVIRQ 3
+#define LOCAL_IRQ_MAILBOX0 4
+#define LOCAL_IRQ_MAILBOX1 5
+#define LOCAL_IRQ_MAILBOX2 6
+#define LOCAL_IRQ_MAILBOX3 7
+#define LOCAL_IRQ_GPU_FAST 8
+#define LOCAL_IRQ_PMU_FAST 9
+#define LAST_IRQ LOCAL_IRQ_PMU_FAST