v4.19.13 snapshot.
diff --git a/include/linux/ipack.h b/include/linux/ipack.h
new file mode 100644
index 0000000..8bddc3f
--- /dev/null
+++ b/include/linux/ipack.h
@@ -0,0 +1,289 @@
+/*
+ * Industry-pack bus.
+ *
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#define IPACK_IDPROM_OFFSET_I 0x01
+#define IPACK_IDPROM_OFFSET_P 0x03
+#define IPACK_IDPROM_OFFSET_A 0x05
+#define IPACK_IDPROM_OFFSET_C 0x07
+#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09
+#define IPACK_IDPROM_OFFSET_MODEL 0x0B
+#define IPACK_IDPROM_OFFSET_REVISION 0x0D
+#define IPACK_IDPROM_OFFSET_RESERVED 0x0F
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13
+#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15
+#define IPACK_IDPROM_OFFSET_CRC 0x17
+
+/*
+ * IndustryPack Fromat, Vendor and Device IDs.
+ */
+
+/* ID section format versions */
+#define IPACK_ID_VERSION_INVALID 0x00
+#define IPACK_ID_VERSION_1 0x01
+#define IPACK_ID_VERSION_2 0x02
+
+/* Vendors and devices. Sort key: vendor first, device next. */
+#define IPACK1_VENDOR_ID_RESERVED1 0x00
+#define IPACK1_VENDOR_ID_RESERVED2 0xFF
+#define IPACK1_VENDOR_ID_UNREGISTRED01 0x01
+#define IPACK1_VENDOR_ID_UNREGISTRED02 0x02
+#define IPACK1_VENDOR_ID_UNREGISTRED03 0x03
+#define IPACK1_VENDOR_ID_UNREGISTRED04 0x04
+#define IPACK1_VENDOR_ID_UNREGISTRED05 0x05
+#define IPACK1_VENDOR_ID_UNREGISTRED06 0x06
+#define IPACK1_VENDOR_ID_UNREGISTRED07 0x07
+#define IPACK1_VENDOR_ID_UNREGISTRED08 0x08
+#define IPACK1_VENDOR_ID_UNREGISTRED09 0x09
+#define IPACK1_VENDOR_ID_UNREGISTRED10 0x0A
+#define IPACK1_VENDOR_ID_UNREGISTRED11 0x0B
+#define IPACK1_VENDOR_ID_UNREGISTRED12 0x0C
+#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D
+#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E
+#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F
+
+#define IPACK1_VENDOR_ID_SBS 0xF0
+#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22
+#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A
+#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48
+
+struct ipack_bus_ops;
+struct ipack_driver;
+
+enum ipack_space {
+ IPACK_IO_SPACE = 0,
+ IPACK_ID_SPACE,
+ IPACK_INT_SPACE,
+ IPACK_MEM8_SPACE,
+ IPACK_MEM16_SPACE,
+ /* Dummy for counting the number of entries. Must remain the last
+ * entry */
+ IPACK_SPACE_COUNT,
+};
+
+/**
+ */
+struct ipack_region {
+ phys_addr_t start;
+ size_t size;
+};
+
+/**
+ * struct ipack_device
+ *
+ * @slot: Slot where the device is plugged in the carrier board
+ * @bus: ipack_bus_device where the device is plugged to.
+ * @id_space: Virtual address to ID space.
+ * @io_space: Virtual address to IO space.
+ * @mem_space: Virtual address to MEM space.
+ * @dev: device in kernel representation.
+ *
+ * Warning: Direct access to mapped memory is possible but the endianness
+ * is not the same with PCI carrier or VME carrier. The endianness is managed
+ * by the carrier board throught bus->ops.
+ */
+struct ipack_device {
+ unsigned int slot;
+ struct ipack_bus_device *bus;
+ struct device dev;
+ void (*release) (struct ipack_device *dev);
+ struct ipack_region region[IPACK_SPACE_COUNT];
+ u8 *id;
+ size_t id_avail;
+ u32 id_vendor;
+ u32 id_device;
+ u8 id_format;
+ unsigned int id_crc_correct:1;
+ unsigned int speed_8mhz:1;
+ unsigned int speed_32mhz:1;
+};
+
+/**
+ * struct ipack_driver_ops -- Callbacks to IPack device driver
+ *
+ * @probe: Probe function
+ * @remove: Prepare imminent removal of the device. Services provided by the
+ * device should be revoked.
+ */
+
+struct ipack_driver_ops {
+ int (*probe) (struct ipack_device *dev);
+ void (*remove) (struct ipack_device *dev);
+};
+
+/**
+ * struct ipack_driver -- Specific data to each ipack device driver
+ *
+ * @driver: Device driver kernel representation
+ * @ops: Callbacks provided by the IPack device driver
+ */
+struct ipack_driver {
+ struct device_driver driver;
+ const struct ipack_device_id *id_table;
+ const struct ipack_driver_ops *ops;
+};
+
+/**
+ * struct ipack_bus_ops - available operations on a bridge module
+ *
+ * @map_space: map IP address space
+ * @unmap_space: unmap IP address space
+ * @request_irq: request IRQ
+ * @free_irq: free IRQ
+ * @get_clockrate: Returns the clockrate the carrier is currently
+ * communicating with the device at.
+ * @set_clockrate: Sets the clock-rate for carrier / module communication.
+ * Should return -EINVAL if the requested speed is not supported.
+ * @get_error: Returns the error state for the slot the device is attached
+ * to.
+ * @get_timeout: Returns 1 if the communication with the device has
+ * previously timed out.
+ * @reset_timeout: Resets the state returned by get_timeout.
+ */
+struct ipack_bus_ops {
+ int (*request_irq) (struct ipack_device *dev,
+ irqreturn_t (*handler)(void *), void *arg);
+ int (*free_irq) (struct ipack_device *dev);
+ int (*get_clockrate) (struct ipack_device *dev);
+ int (*set_clockrate) (struct ipack_device *dev, int mherz);
+ int (*get_error) (struct ipack_device *dev);
+ int (*get_timeout) (struct ipack_device *dev);
+ int (*reset_timeout) (struct ipack_device *dev);
+};
+
+/**
+ * struct ipack_bus_device
+ *
+ * @dev: pointer to carrier device
+ * @slots: number of slots available
+ * @bus_nr: ipack bus number
+ * @ops: bus operations for the mezzanine drivers
+ */
+struct ipack_bus_device {
+ struct module *owner;
+ struct device *parent;
+ int slots;
+ int bus_nr;
+ const struct ipack_bus_ops *ops;
+};
+
+/**
+ * ipack_bus_register -- register a new ipack bus
+ *
+ * @parent: pointer to the parent device, if any.
+ * @slots: number of slots available in the bus device.
+ * @ops: bus operations for the mezzanine drivers.
+ *
+ * The carrier board device should call this function to register itself as
+ * available bus device in ipack.
+ */
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+ const struct ipack_bus_ops *ops,
+ struct module *owner);
+
+/**
+ * ipack_bus_unregister -- unregister an ipack bus
+ */
+int ipack_bus_unregister(struct ipack_bus_device *bus);
+
+/**
+ * ipack_driver_register -- Register a new ipack device driver
+ *
+ * Called by a ipack driver to register itself as a driver
+ * that can manage ipack devices.
+ */
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
+ const char *name);
+void ipack_driver_unregister(struct ipack_driver *edrv);
+
+/**
+ * ipack_device_init -- initialize an IPack device
+ * @dev: the new device to initialize.
+ *
+ * Initialize a new IPack device ("module" in IndustryPack jargon). The call
+ * is done by the carrier driver. The carrier should populate the fields
+ * bus and slot as well as the region array of @dev prior to calling this
+ * function. The rest of the fields will be allocated and populated
+ * during initalization.
+ *
+ * Return zero on success or error code on failure.
+ *
+ * NOTE: _Never_ directly free @dev after calling this function, even
+ * if it returned an error! Always use ipack_put_device() to give up the
+ * reference initialized in this function instead.
+ */
+int ipack_device_init(struct ipack_device *dev);
+
+/**
+ * ipack_device_add -- Add an IPack device
+ * @dev: the new device to add.
+ *
+ * Add a new IPack device. The call is done by the carrier driver
+ * after calling ipack_device_init().
+ *
+ * Return zero on success or error code on failure.
+ *
+ * NOTE: _Never_ directly free @dev after calling this function, even
+ * if it returned an error! Always use ipack_put_device() to give up the
+ * reference initialized in this function instead.
+ */
+int ipack_device_add(struct ipack_device *dev);
+void ipack_device_del(struct ipack_device *dev);
+
+void ipack_get_device(struct ipack_device *dev);
+void ipack_put_device(struct ipack_device *dev);
+
+/**
+ * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct ipack_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_IPACK_DEVICE_TABLE(_table) \
+ const struct ipack_device_id _table[]
+/**
+ * IPACK_DEVICE - macro used to describe a specific IndustryPack device
+ * @_format: the format version (currently either 1 or 2, 8 bit value)
+ * @vend: the 8 or 24 bit IndustryPack Vendor ID
+ * @dev: the 8 or 16 bit IndustryPack Device ID
+ *
+ * This macro is used to create a struct ipack_device_id that matches a specific
+ * device.
+ */
+#define IPACK_DEVICE(_format, vend, dev) \
+ .format = (_format), \
+ .vendor = (vend), \
+ .device = (dev)
+
+/**
+ * ipack_get_carrier - it increase the carrier ref. counter of
+ * the carrier module
+ * @dev: mezzanine device which wants to get the carrier
+ */
+static inline int ipack_get_carrier(struct ipack_device *dev)
+{
+ return try_module_get(dev->bus->owner);
+}
+
+/**
+ * ipack_get_carrier - it decrease the carrier ref. counter of
+ * the carrier module
+ * @dev: mezzanine device which wants to get the carrier
+ */
+static inline void ipack_put_carrier(struct ipack_device *dev)
+{
+ module_put(dev->bus->owner);
+}