v4.19.13 snapshot.
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
new file mode 100644
index 0000000..b1d861c
--- /dev/null
+++ b/include/linux/iopoll.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2012-2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_IOPOLL_H
+#define _LINUX_IOPOLL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+/**
+ * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ * tight-loops). Should be less than ~20ms since usleep_range
+ * is used (see Documentation/timers/timers-howto.txt).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val. Must not
+ * be called from atomic context if sleep_us or timeout_us are used.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
+({ \
+ u64 __timeout_us = (timeout_us); \
+ unsigned long __sleep_us = (sleep_us); \
+ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+ might_sleep_if((__sleep_us) != 0); \
+ for (;;) { \
+ (val) = op(addr); \
+ if (cond) \
+ break; \
+ if (__timeout_us && \
+ ktime_compare(ktime_get(), __timeout) > 0) { \
+ (val) = op(addr); \
+ break; \
+ } \
+ if (__sleep_us) \
+ usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+/**
+ * readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops). Should
+ * be less than ~10us since udelay is used (see
+ * Documentation/timers/timers-howto.txt).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \
+({ \
+ u64 __timeout_us = (timeout_us); \
+ unsigned long __delay_us = (delay_us); \
+ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+ for (;;) { \
+ (val) = op(addr); \
+ if (cond) \
+ break; \
+ if (__timeout_us && \
+ ktime_compare(ktime_get(), __timeout) > 0) { \
+ (val) = op(addr); \
+ break; \
+ } \
+ if (__delay_us) \
+ udelay(__delay_us); \
+ } \
+ (cond) ? 0 : -ETIMEDOUT; \
+})
+
+
+#define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us)
+
+#define readb_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readb, addr, val, cond, delay_us, timeout_us)
+
+#define readw_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readw, addr, val, cond, delay_us, timeout_us)
+
+#define readw_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readw, addr, val, cond, delay_us, timeout_us)
+
+#define readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readl, addr, val, cond, delay_us, timeout_us)
+
+#define readl_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readl, addr, val, cond, delay_us, timeout_us)
+
+#define readq_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readq, addr, val, cond, delay_us, timeout_us)
+
+#define readq_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readq, addr, val, cond, delay_us, timeout_us)
+
+#define readb_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readb_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readb_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readb_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readw_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readw_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readw_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readw_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readl_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readl_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readq_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout(readq_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define readq_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \
+ readx_poll_timeout_atomic(readq_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#endif /* _LINUX_IOPOLL_H */