v4.19.13 snapshot.
diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h
new file mode 100644
index 0000000..e166cac
--- /dev/null
+++ b/include/linux/dma/dw.h
@@ -0,0 +1,53 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2010-2011 ST Microelectronics
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _DMA_DW_H
+#define _DMA_DW_H
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+#include <linux/platform_data/dma-dw.h>
+
+struct dw_dma;
+
+/**
+ * struct dw_dma_chip - representation of DesignWare DMA controller hardware
+ * @dev: struct device of the DMA controller
+ * @id: instance ID
+ * @irq: irq line
+ * @regs: memory mapped I/O space
+ * @clk: hclk clock
+ * @dw: struct dw_dma that is filed by dw_dma_probe()
+ * @pdata: pointer to platform data
+ */
+struct dw_dma_chip {
+ struct device *dev;
+ int id;
+ int irq;
+ void __iomem *regs;
+ struct clk *clk;
+ struct dw_dma *dw;
+
+ const struct dw_dma_platform_data *pdata;
+};
+
+/* Export to the platform drivers */
+#if IS_ENABLED(CONFIG_DW_DMAC_CORE)
+int dw_dma_probe(struct dw_dma_chip *chip);
+int dw_dma_remove(struct dw_dma_chip *chip);
+#else
+static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
+static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; }
+#endif /* CONFIG_DW_DMAC_CORE */
+
+#endif /* _DMA_DW_H */
diff --git a/include/linux/dma/hsu.h b/include/linux/dma/hsu.h
new file mode 100644
index 0000000..197eec6
--- /dev/null
+++ b/include/linux/dma/hsu.h
@@ -0,0 +1,64 @@
+/*
+ * Driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DMA_HSU_H
+#define _DMA_HSU_H
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_data/dma-hsu.h>
+
+struct hsu_dma;
+
+/**
+ * struct hsu_dma_chip - representation of HSU DMA hardware
+ * @dev: struct device of the DMA controller
+ * @irq: irq line
+ * @regs: memory mapped I/O space
+ * @length: I/O space length
+ * @offset: offset of the I/O space where registers are located
+ * @hsu: struct hsu_dma that is filed by ->probe()
+ * @pdata: platform data for the DMA controller if provided
+ */
+struct hsu_dma_chip {
+ struct device *dev;
+ int irq;
+ void __iomem *regs;
+ unsigned int length;
+ unsigned int offset;
+ struct hsu_dma *hsu;
+};
+
+#if IS_ENABLED(CONFIG_HSU_DMA)
+/* Export to the internal users */
+int hsu_dma_get_status(struct hsu_dma_chip *chip, unsigned short nr,
+ u32 *status);
+int hsu_dma_do_irq(struct hsu_dma_chip *chip, unsigned short nr, u32 status);
+
+/* Export to the platform drivers */
+int hsu_dma_probe(struct hsu_dma_chip *chip);
+int hsu_dma_remove(struct hsu_dma_chip *chip);
+#else
+static inline int hsu_dma_get_status(struct hsu_dma_chip *chip,
+ unsigned short nr, u32 *status)
+{
+ return 0;
+}
+static inline int hsu_dma_do_irq(struct hsu_dma_chip *chip, unsigned short nr,
+ u32 status)
+{
+ return 0;
+}
+static inline int hsu_dma_probe(struct hsu_dma_chip *chip) { return -ENODEV; }
+static inline int hsu_dma_remove(struct hsu_dma_chip *chip) { return 0; }
+#endif /* CONFIG_HSU_DMA */
+
+#endif /* _DMA_HSU_H */
diff --git a/include/linux/dma/ipu-dma.h b/include/linux/dma/ipu-dma.h
new file mode 100644
index 0000000..1803111
--- /dev/null
+++ b/include/linux/dma/ipu-dma.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_DMA_IPU_DMA_H
+#define __LINUX_DMA_IPU_DMA_H
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+ IDMAC_IC_0 = 0, /* IC (encoding task) to memory */
+ IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */
+ IDMAC_ADC_0 = 1,
+ IDMAC_IC_2 = 2,
+ IDMAC_ADC_1 = 2,
+ IDMAC_IC_3 = 3,
+ IDMAC_IC_4 = 4,
+ IDMAC_IC_5 = 5,
+ IDMAC_IC_6 = 6,
+ IDMAC_IC_7 = 7, /* IC (sensor data) to memory */
+ IDMAC_IC_8 = 8,
+ IDMAC_IC_9 = 9,
+ IDMAC_IC_10 = 10,
+ IDMAC_IC_11 = 11,
+ IDMAC_IC_12 = 12,
+ IDMAC_IC_13 = 13,
+ IDMAC_SDC_0 = 14, /* Background synchronous display data */
+ IDMAC_SDC_1 = 15, /* Foreground data (overlay) */
+ IDMAC_SDC_2 = 16,
+ IDMAC_SDC_3 = 17,
+ IDMAC_ADC_2 = 18,
+ IDMAC_ADC_3 = 19,
+ IDMAC_ADC_4 = 20,
+ IDMAC_ADC_5 = 21,
+ IDMAC_ADC_6 = 22,
+ IDMAC_ADC_7 = 23,
+ IDMAC_PF_0 = 24,
+ IDMAC_PF_1 = 25,
+ IDMAC_PF_2 = 26,
+ IDMAC_PF_3 = 27,
+ IDMAC_PF_4 = 28,
+ IDMAC_PF_5 = 29,
+ IDMAC_PF_6 = 30,
+ IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+ IPU_CHANNEL_FREE,
+ IPU_CHANNEL_INITIALIZED,
+ IPU_CHANNEL_READY,
+ IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+ /* 1 byte */
+ IPU_PIX_FMT_GENERIC,
+ IPU_PIX_FMT_RGB332,
+ IPU_PIX_FMT_YUV420P,
+ IPU_PIX_FMT_YUV422P,
+ IPU_PIX_FMT_YUV420P2,
+ IPU_PIX_FMT_YVU422P,
+ /* 2 bytes */
+ IPU_PIX_FMT_RGB565,
+ IPU_PIX_FMT_RGB666,
+ IPU_PIX_FMT_BGR666,
+ IPU_PIX_FMT_YUYV,
+ IPU_PIX_FMT_UYVY,
+ /* 3 bytes */
+ IPU_PIX_FMT_RGB24,
+ IPU_PIX_FMT_BGR24,
+ /* 4 bytes */
+ IPU_PIX_FMT_GENERIC_32,
+ IPU_PIX_FMT_RGB32,
+ IPU_PIX_FMT_BGR32,
+ IPU_PIX_FMT_ABGR32,
+ IPU_PIX_FMT_BGRA32,
+ IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+ IPU_COLORSPACE_RGB,
+ IPU_COLORSPACE_YCBCR,
+ IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+ /* Note the enum values correspond to BAM value */
+ IPU_ROTATE_NONE = 0,
+ IPU_ROTATE_VERT_FLIP = 1,
+ IPU_ROTATE_HORIZ_FLIP = 2,
+ IPU_ROTATE_180 = 3,
+ IPU_ROTATE_90_RIGHT = 4,
+ IPU_ROTATE_90_RIGHT_VFLIP = 5,
+ IPU_ROTATE_90_RIGHT_HFLIP = 6,
+ IPU_ROTATE_90_LEFT = 7,
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+ DISP0,
+ DISP1,
+ DISP2,
+ DISP3
+};
+
+struct idmac_video_param {
+ unsigned short in_width;
+ unsigned short in_height;
+ uint32_t in_pixel_fmt;
+ unsigned short out_width;
+ unsigned short out_height;
+ uint32_t out_pixel_fmt;
+ unsigned short out_stride;
+ bool graphics_combine_en;
+ bool global_alpha_en;
+ bool key_color_en;
+ enum display_port disp;
+ unsigned short out_left;
+ unsigned short out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+ struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+ struct dma_async_tx_descriptor txd;
+ struct scatterlist *sg; /* scatterlist for this */
+ unsigned int sg_len; /* tx-descriptor. */
+ struct list_head list;
+};
+
+struct idmac_channel {
+ struct dma_chan dma_chan;
+ dma_cookie_t completed; /* last completed cookie */
+ union ipu_channel_param params;
+ enum ipu_channel link; /* input channel, linked to the output */
+ enum ipu_channel_status status;
+ void *client; /* Only one client per channel */
+ unsigned int n_tx_desc;
+ struct idmac_tx_desc *desc; /* allocated tx-descriptors */
+ struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */
+ struct list_head free_list; /* free tx-descriptors */
+ struct list_head queue; /* queued tx-descriptors */
+ spinlock_t lock; /* protects sg[0,1], queue */
+ struct mutex chan_mutex; /* protects status, cookie, free_list */
+ bool sec_chan_en;
+ int active_buffer;
+ unsigned int eof_irq;
+ char eof_name[16]; /* EOF IRQ name for request_irq() */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif /* __LINUX_DMA_IPU_DMA_H */
diff --git a/include/linux/dma/mmp-pdma.h b/include/linux/dma/mmp-pdma.h
new file mode 100644
index 0000000..25cab62
--- /dev/null
+++ b/include/linux/dma/mmp-pdma.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MMP_PDMA_H_
+#define _MMP_PDMA_H_
+
+struct dma_chan;
+
+#ifdef CONFIG_MMP_PDMA
+bool mmp_pdma_filter_fn(struct dma_chan *chan, void *param);
+#else
+static inline bool mmp_pdma_filter_fn(struct dma_chan *chan, void *param)
+{
+ return false;
+}
+#endif
+
+#endif /* _MMP_PDMA_H_ */
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
new file mode 100644
index 0000000..9fc594f
--- /dev/null
+++ b/include/linux/dma/pxa-dma.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PXA_DMA_H_
+#define _PXA_DMA_H_
+
+enum pxad_chan_prio {
+ PXAD_PRIO_HIGHEST = 0,
+ PXAD_PRIO_NORMAL,
+ PXAD_PRIO_LOW,
+ PXAD_PRIO_LOWEST,
+};
+
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
+struct pxad_param {
+ unsigned int drcmr;
+ enum pxad_chan_prio prio;
+};
+
+struct dma_chan;
+
+#ifdef CONFIG_PXA_DMA
+bool pxad_filter_fn(struct dma_chan *chan, void *param);
+#else
+static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
+{
+ return false;
+}
+#endif
+
+#endif /* _PXA_DMA_H_ */
diff --git a/include/linux/dma/qcom_bam_dma.h b/include/linux/dma/qcom_bam_dma.h
new file mode 100644
index 0000000..077d43a
--- /dev/null
+++ b/include/linux/dma/qcom_bam_dma.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _QCOM_BAM_DMA_H
+#define _QCOM_BAM_DMA_H
+
+#include <asm/byteorder.h>
+
+/*
+ * This data type corresponds to the native Command Element
+ * supported by BAM DMA Engine.
+ *
+ * @cmd_and_addr - upper 8 bits command and lower 24 bits register address.
+ * @data - for write command: content to be written into peripheral register.
+ * for read command: dest addr to write peripheral register value.
+ * @mask - register mask.
+ * @reserved - for future usage.
+ *
+ */
+struct bam_cmd_element {
+ __le32 cmd_and_addr;
+ __le32 data;
+ __le32 mask;
+ __le32 reserved;
+};
+
+/*
+ * This enum indicates the command type in a command element
+ */
+enum bam_command_type {
+ BAM_WRITE_COMMAND = 0,
+ BAM_READ_COMMAND,
+};
+
+/*
+ * prep_bam_ce_le32 - Wrapper function to prepare a single BAM command
+ * element with the data already in le32 format.
+ *
+ * @bam_ce: bam command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read in le32
+ */
+static inline void
+bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr,
+ enum bam_command_type cmd, __le32 data)
+{
+ bam_ce->cmd_and_addr =
+ cpu_to_le32((addr & 0xffffff) | ((cmd & 0xff) << 24));
+ bam_ce->data = data;
+ bam_ce->mask = cpu_to_le32(0xffffffff);
+}
+
+/*
+ * bam_prep_ce - Wrapper function to prepare a single BAM command element
+ * with the data.
+ *
+ * @bam_ce: BAM command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read
+ */
+static inline void
+bam_prep_ce(struct bam_cmd_element *bam_ce, u32 addr,
+ enum bam_command_type cmd, u32 data)
+{
+ bam_prep_ce_le32(bam_ce, addr, cmd, cpu_to_le32(data));
+}
+#endif
diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
new file mode 100644
index 0000000..b0115e3
--- /dev/null
+++ b/include/linux/dma/sprd-dma.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SPRD_DMA_H_
+#define _SPRD_DMA_H_
+
+#define SPRD_DMA_REQ_SHIFT 16
+#define SPRD_DMA_FLAGS(req_mode, int_type) \
+ ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+
+/*
+ * enum sprd_dma_req_mode: define the DMA request mode
+ * @SPRD_DMA_FRAG_REQ: fragment request mode
+ * @SPRD_DMA_BLK_REQ: block request mode
+ * @SPRD_DMA_TRANS_REQ: transaction request mode
+ * @SPRD_DMA_LIST_REQ: link-list request mode
+ *
+ * We have 4 types request mode: fragment mode, block mode, transaction mode
+ * and linklist mode. One transaction can contain several blocks, one block can
+ * contain several fragments. Link-list mode means we can save several DMA
+ * configuration into one reserved memory, then DMA can fetch each DMA
+ * configuration automatically to start transfer.
+ */
+enum sprd_dma_req_mode {
+ SPRD_DMA_FRAG_REQ,
+ SPRD_DMA_BLK_REQ,
+ SPRD_DMA_TRANS_REQ,
+ SPRD_DMA_LIST_REQ,
+};
+
+/*
+ * enum sprd_dma_int_type: define the DMA interrupt type
+ * @SPRD_DMA_NO_INT: do not need generate DMA interrupts.
+ * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request
+ * is done.
+ * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done.
+ * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment
+ * or one block request is done.
+ * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction
+ * request is done.
+ * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one
+ * transaction request or fragment request is done.
+ * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one
+ * transaction request or block request is done.
+ * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request
+ * is done.
+ * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is
+ * incorrect.
+ */
+enum sprd_dma_int_type {
+ SPRD_DMA_NO_INT,
+ SPRD_DMA_FRAG_INT,
+ SPRD_DMA_BLK_INT,
+ SPRD_DMA_BLK_FRAG_INT,
+ SPRD_DMA_TRANS_INT,
+ SPRD_DMA_TRANS_FRAG_INT,
+ SPRD_DMA_TRANS_BLK_INT,
+ SPRD_DMA_LIST_INT,
+ SPRD_DMA_CFGERR_INT,
+};
+
+#endif
diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h
new file mode 100644
index 0000000..5b6e61e
--- /dev/null
+++ b/include/linux/dma/xilinx_dma.h
@@ -0,0 +1,49 @@
+/*
+ * Xilinx DMA Engine drivers support header file
+ *
+ * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DMA_XILINX_DMA_H
+#define __DMA_XILINX_DMA_H
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+/**
+ * struct xilinx_vdma_config - VDMA Configuration structure
+ * @frm_dly: Frame delay
+ * @gen_lock: Whether in gen-lock mode
+ * @master: Master that it syncs to
+ * @frm_cnt_en: Enable frame count enable
+ * @park: Whether wants to park
+ * @park_frm: Frame to park on
+ * @coalesc: Interrupt coalescing threshold
+ * @delay: Delay counter
+ * @reset: Reset Channel
+ * @ext_fsync: External Frame Sync source
+ * @vflip_en: Vertical Flip enable
+ */
+struct xilinx_vdma_config {
+ int frm_dly;
+ int gen_lock;
+ int master;
+ int frm_cnt_en;
+ int park;
+ int park_frm;
+ int coalesc;
+ int delay;
+ int reset;
+ int ext_fsync;
+ bool vflip_en;
+};
+
+int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
+ struct xilinx_vdma_config *cfg);
+
+#endif