v4.19.13 snapshot.
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
new file mode 100644
index 0000000..7895d61
--- /dev/null
+++ b/drivers/usb/misc/ehset.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
+#define TEST_SE0_NAK_PID 0x0101
+#define TEST_J_PID 0x0102
+#define TEST_K_PID 0x0103
+#define TEST_PACKET_PID 0x0104
+#define TEST_HS_HOST_PORT_SUSPEND_RESUME 0x0106
+#define TEST_SINGLE_STEP_GET_DEV_DESC 0x0107
+#define TEST_SINGLE_STEP_SET_FEATURE 0x0108
+
+static int ehset_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret = -EINVAL;
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_device *hub_udev = dev->parent;
+ struct usb_device_descriptor *buf;
+ u8 portnum = dev->portnum;
+ u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
+
+ switch (test_pid) {
+ case TEST_SE0_NAK_PID:
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_TEST,
+ (TEST_SE0_NAK << 8) | portnum,
+ NULL, 0, 1000);
+ break;
+ case TEST_J_PID:
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_TEST,
+ (TEST_J << 8) | portnum,
+ NULL, 0, 1000);
+ break;
+ case TEST_K_PID:
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_TEST,
+ (TEST_K << 8) | portnum,
+ NULL, 0, 1000);
+ break;
+ case TEST_PACKET_PID:
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_TEST,
+ (TEST_PACKET << 8) | portnum,
+ NULL, 0, 1000);
+ break;
+ case TEST_HS_HOST_PORT_SUSPEND_RESUME:
+ /* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
+ msleep(15 * 1000);
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_SUSPEND, portnum,
+ NULL, 0, 1000);
+ if (ret < 0)
+ break;
+
+ msleep(15 * 1000);
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_SUSPEND, portnum,
+ NULL, 0, 1000);
+ break;
+ case TEST_SINGLE_STEP_GET_DEV_DESC:
+ /* Test: wait for 15secs -> GetDescriptor request */
+ msleep(15 * 1000);
+ buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+ USB_DT_DEVICE << 8, 0,
+ buf, USB_DT_DEVICE_SIZE,
+ USB_CTRL_GET_TIMEOUT);
+ kfree(buf);
+ break;
+ case TEST_SINGLE_STEP_SET_FEATURE:
+ /*
+ * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
+ *
+ * Note, this test is only supported on root hubs since the
+ * SetPortFeature handling can only be done inside the HCD's
+ * hub_control callback function.
+ */
+ if (hub_udev != dev->bus->root_hub) {
+ dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
+ break;
+ }
+
+ ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+ USB_REQ_SET_FEATURE, USB_RT_PORT,
+ USB_PORT_FEAT_TEST,
+ (6 << 8) | portnum,
+ NULL, 0, 60 * 1000);
+
+ break;
+ default:
+ dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
+ __func__, test_pid);
+ }
+
+ return (ret < 0) ? ret : 0;
+}
+
+static void ehset_disconnect(struct usb_interface *intf)
+{
+}
+
+static const struct usb_device_id ehset_id_table[] = {
+ { USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
+ { USB_DEVICE(0x1a0a, TEST_J_PID) },
+ { USB_DEVICE(0x1a0a, TEST_K_PID) },
+ { USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
+ { USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
+ { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
+ { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ehset_id_table);
+
+static struct usb_driver ehset_driver = {
+ .name = "usb_ehset_test",
+ .probe = ehset_probe,
+ .disconnect = ehset_disconnect,
+ .id_table = ehset_id_table,
+};
+
+module_usb_driver(ehset_driver);
+
+MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
+MODULE_LICENSE("GPL v2");