v4.19.13 snapshot.
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
new file mode 100644
index 0000000..76a9b40
--- /dev/null
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Bus glue for OHCI HC on the of_platform bus
+ *
+ * Modified for of_platform bus from ohci-sa1111.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/prom.h>
+
+
+static int
+ohci_ppc_of_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run(ohci)) < 0) {
+ dev_err(hcd->self.controller, "can't start %s\n",
+ hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hc_driver ohci_ppc_of_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OF OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_ppc_of_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+
+static int ohci_hcd_ppc_of_probe(struct platform_device *op)
+{
+ struct device_node *dn = op->dev.of_node;
+ struct usb_hcd *hcd;
+ struct ohci_hcd *ohci;
+ struct resource res;
+ int irq;
+
+ int rv;
+ int is_bigendian;
+ struct device_node *np;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ is_bigendian =
+ of_device_is_compatible(dn, "ohci-bigendian") ||
+ of_device_is_compatible(dn, "ohci-be");
+
+ dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+ rv = of_address_to_resource(dn, 0, &res);
+ if (rv)
+ return rv;
+
+ hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+ if (!hcd)
+ return -ENOMEM;
+
+ hcd->rsrc_start = res.start;
+ hcd->rsrc_len = resource_size(&res);
+
+ hcd->regs = devm_ioremap_resource(&op->dev, &res);
+ if (IS_ERR(hcd->regs)) {
+ rv = PTR_ERR(hcd->regs);
+ goto err_rmr;
+ }
+
+ irq = irq_of_parse_and_map(dn, 0);
+ if (irq == NO_IRQ) {
+ dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+ __FILE__);
+ rv = -EBUSY;
+ goto err_rmr;
+ }
+
+ ohci = hcd_to_ohci(hcd);
+ if (is_bigendian) {
+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+ if (of_device_is_compatible(dn, "fsl,mpc5200-ohci"))
+ ohci->flags |= OHCI_QUIRK_FRAME_NO;
+ if (of_device_is_compatible(dn, "mpc5200-ohci"))
+ ohci->flags |= OHCI_QUIRK_FRAME_NO;
+ }
+
+ ohci_hcd_init(ohci);
+
+ rv = usb_add_hcd(hcd, irq, 0);
+ if (rv == 0) {
+ device_wakeup_enable(hcd->self.controller);
+ return 0;
+ }
+
+ /* by now, 440epx is known to show usb_23 erratum */
+ np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
+
+ /* Work around - At this point ohci_run has executed, the
+ * controller is running, everything, the root ports, etc., is
+ * set up. If the ehci driver is loaded, put the ohci core in
+ * the suspended state. The ehci driver will bring it out of
+ * suspended state when / if a non-high speed USB device is
+ * attached to the USB Host port. If the ehci driver is not
+ * loaded, do nothing. request_mem_region is used to test if
+ * the ehci driver is loaded.
+ */
+ if (np != NULL) {
+ if (!of_address_to_resource(np, 0, &res)) {
+ if (!request_mem_region(res.start, 0x4, hcd_name)) {
+ writel_be((readl_be(&ohci->regs->control) |
+ OHCI_USB_SUSPEND), &ohci->regs->control);
+ (void) readl_be(&ohci->regs->control);
+ } else
+ release_mem_region(res.start, 0x4);
+ } else
+ pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__);
+ }
+
+ irq_dispose_mapping(irq);
+err_rmr:
+ usb_put_hcd(hcd);
+
+ return rv;
+}
+
+static int ohci_hcd_ppc_of_remove(struct platform_device *op)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(op);
+
+ dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+ usb_remove_hcd(hcd);
+
+ irq_dispose_mapping(hcd->irq);
+
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+static const struct of_device_id ohci_hcd_ppc_of_match[] = {
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
+ {
+ .name = "usb",
+ .compatible = "ohci-bigendian",
+ },
+ {
+ .name = "usb",
+ .compatible = "ohci-be",
+ },
+#endif
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
+ {
+ .name = "usb",
+ .compatible = "ohci-littledian",
+ },
+ {
+ .name = "usb",
+ .compatible = "ohci-le",
+ },
+#endif
+ {},
+};
+MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
+
+#if !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
+ !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
+#error "No endianness selected for ppc-of-ohci"
+#endif
+
+
+static struct platform_driver ohci_hcd_ppc_of_driver = {
+ .probe = ohci_hcd_ppc_of_probe,
+ .remove = ohci_hcd_ppc_of_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "ppc-of-ohci",
+ .of_match_table = ohci_hcd_ppc_of_match,
+ },
+};
+