v4.19.13 snapshot.
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
new file mode 100644
index 0000000..9852ec5
--- /dev/null
+++ b/drivers/usb/chipidea/udc.c
@@ -0,0 +1,2016 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * udc.c - ChipIdea UDC driver
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/* control endpoint description */
+static const struct usb_endpoint_descriptor
+ctrl_endpt_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static const struct usb_endpoint_descriptor
+ctrl_endpt_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+/**
+ * hw_ep_bit: calculates the bit number
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns bit number
+ */
+static inline int hw_ep_bit(int num, int dir)
+{
+ return num + ((dir == TX) ? 16 : 0);
+}
+
+static inline int ep_to_bit(struct ci_hdrc *ci, int n)
+{
+ int fill = 16 - ci->hw_ep_max / 2;
+
+ if (n >= ci->hw_ep_max / 2)
+ n += fill;
+
+ return n;
+}
+
+/**
+ * hw_device_state: enables/disables interrupts (execute without interruption)
+ * @dma: 0 => disable, !0 => enable and set dma engine
+ *
+ * This function returns an error code
+ */
+static int hw_device_state(struct ci_hdrc *ci, u32 dma)
+{
+ if (dma) {
+ hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
+ /* interrupt, error, port change, reset, sleep/suspend */
+ hw_write(ci, OP_USBINTR, ~0,
+ USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+ } else {
+ hw_write(ci, OP_USBINTR, ~0, 0);
+ }
+ return 0;
+}
+
+/**
+ * hw_ep_flush: flush endpoint fifo (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
+{
+ int n = hw_ep_bit(num, dir);
+
+ do {
+ /* flush any pending transfer */
+ hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
+ while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
+ cpu_relax();
+ } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
+
+ return 0;
+}
+
+/**
+ * hw_ep_disable: disables endpoint (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
+{
+ hw_write(ci, OP_ENDPTCTRL + num,
+ (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
+ return 0;
+}
+
+/**
+ * hw_ep_enable: enables endpoint (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ * @type: endpoint type
+ *
+ * This function returns an error code
+ */
+static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
+{
+ u32 mask, data;
+
+ if (dir == TX) {
+ mask = ENDPTCTRL_TXT; /* type */
+ data = type << __ffs(mask);
+
+ mask |= ENDPTCTRL_TXS; /* unstall */
+ mask |= ENDPTCTRL_TXR; /* reset data toggle */
+ data |= ENDPTCTRL_TXR;
+ mask |= ENDPTCTRL_TXE; /* enable */
+ data |= ENDPTCTRL_TXE;
+ } else {
+ mask = ENDPTCTRL_RXT; /* type */
+ data = type << __ffs(mask);
+
+ mask |= ENDPTCTRL_RXS; /* unstall */
+ mask |= ENDPTCTRL_RXR; /* reset data toggle */
+ data |= ENDPTCTRL_RXR;
+ mask |= ENDPTCTRL_RXE; /* enable */
+ data |= ENDPTCTRL_RXE;
+ }
+ hw_write(ci, OP_ENDPTCTRL + num, mask, data);
+ return 0;
+}
+
+/**
+ * hw_ep_get_halt: return endpoint halt status
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns 1 if endpoint halted
+ */
+static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
+{
+ u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+
+ return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+}
+
+/**
+ * hw_ep_prime: primes endpoint (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ * @is_ctrl: true if control endpoint
+ *
+ * This function returns an error code
+ */
+static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
+{
+ int n = hw_ep_bit(num, dir);
+
+ /* Synchronize before ep prime */
+ wmb();
+
+ if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
+ return -EAGAIN;
+
+ hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
+
+ while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
+ cpu_relax();
+ if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
+ return -EAGAIN;
+
+ /* status shoult be tested according with manual but it doesn't work */
+ return 0;
+}
+
+/**
+ * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
+ * without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ * @value: true => stall, false => unstall
+ *
+ * This function returns an error code
+ */
+static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
+{
+ if (value != 0 && value != 1)
+ return -EINVAL;
+
+ do {
+ enum ci_hw_regs reg = OP_ENDPTCTRL + num;
+ u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+ u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
+
+ /* data toggle - reserved for EP0 but it's in ESS */
+ hw_write(ci, reg, mask_xs|mask_xr,
+ value ? mask_xs : mask_xr);
+ } while (value != hw_ep_get_halt(ci, num, dir));
+
+ return 0;
+}
+
+/**
+ * hw_is_port_high_speed: test if port is high speed
+ *
+ * This function returns true if high speed port
+ */
+static int hw_port_is_high_speed(struct ci_hdrc *ci)
+{
+ return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
+ hw_read(ci, OP_PORTSC, PORTSC_HSP);
+}
+
+/**
+ * hw_test_and_clear_complete: test & clear complete status (execute without
+ * interruption)
+ * @n: endpoint number
+ *
+ * This function returns complete status
+ */
+static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
+{
+ n = ep_to_bit(ci, n);
+ return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
+}
+
+/**
+ * hw_test_and_clear_intr_active: test & clear active interrupts (execute
+ * without interruption)
+ *
+ * This function returns active interrutps
+ */
+static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
+{
+ u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
+
+ hw_write(ci, OP_USBSTS, ~0, reg);
+ return reg;
+}
+
+/**
+ * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
+ * interruption)
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
+{
+ return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
+}
+
+/**
+ * hw_test_and_set_setup_guard: test & set setup guard (execute without
+ * interruption)
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
+{
+ return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+}
+
+/**
+ * hw_usb_set_address: configures USB address (execute without interruption)
+ * @value: new USB address
+ *
+ * This function explicitly sets the address, without the "USBADRA" (advance)
+ * feature, which is not supported by older versions of the controller.
+ */
+static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
+{
+ hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
+ value << __ffs(DEVICEADDR_USBADR));
+}
+
+/**
+ * hw_usb_reset: restart device after a bus reset (execute without
+ * interruption)
+ *
+ * This function returns an error code
+ */
+static int hw_usb_reset(struct ci_hdrc *ci)
+{
+ hw_usb_set_address(ci, 0);
+
+ /* ESS flushes only at end?!? */
+ hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
+
+ /* clear setup token semaphores */
+ hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0);
+
+ /* clear complete status */
+ hw_write(ci, OP_ENDPTCOMPLETE, 0, 0);
+
+ /* wait until all bits cleared */
+ while (hw_read(ci, OP_ENDPTPRIME, ~0))
+ udelay(10); /* not RTOS friendly */
+
+ /* reset all endpoints ? */
+
+ /* reset internal status and wait for further instructions
+ no need to verify the port reset status (ESS does it) */
+
+ return 0;
+}
+
+/******************************************************************************
+ * UTIL block
+ *****************************************************************************/
+
+static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
+ unsigned length)
+{
+ int i;
+ u32 temp;
+ struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
+ GFP_ATOMIC);
+
+ if (node == NULL)
+ return -ENOMEM;
+
+ node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma);
+ if (node->ptr == NULL) {
+ kfree(node);
+ return -ENOMEM;
+ }
+
+ node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
+ node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
+ node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+ u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
+ mul++;
+ node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
+ }
+
+ temp = (u32) (hwreq->req.dma + hwreq->req.actual);
+ if (length) {
+ node->ptr->page[0] = cpu_to_le32(temp);
+ for (i = 1; i < TD_PAGE_COUNT; i++) {
+ u32 page = temp + i * CI_HDRC_PAGE_SIZE;
+ page &= ~TD_RESERVED_MASK;
+ node->ptr->page[i] = cpu_to_le32(page);
+ }
+ }
+
+ hwreq->req.actual += length;
+
+ if (!list_empty(&hwreq->tds)) {
+ /* get the last entry */
+ lastnode = list_entry(hwreq->tds.prev,
+ struct td_node, td);
+ lastnode->ptr->next = cpu_to_le32(node->dma);
+ }
+
+ INIT_LIST_HEAD(&node->td);
+ list_add_tail(&node->td, &hwreq->tds);
+
+ return 0;
+}
+
+/**
+ * _usb_addr: calculates endpoint address from direction & number
+ * @ep: endpoint
+ */
+static inline u8 _usb_addr(struct ci_hw_ep *ep)
+{
+ return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
+}
+
+/**
+ * _hardware_enqueue: configures a request at hardware level
+ * @hwep: endpoint
+ * @hwreq: request
+ *
+ * This function returns an error code
+ */
+static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+ struct ci_hdrc *ci = hwep->ci;
+ int ret = 0;
+ unsigned rest = hwreq->req.length;
+ int pages = TD_PAGE_COUNT;
+ struct td_node *firstnode, *lastnode;
+
+ /* don't queue twice */
+ if (hwreq->req.status == -EALREADY)
+ return -EALREADY;
+
+ hwreq->req.status = -EALREADY;
+
+ ret = usb_gadget_map_request_by_dev(ci->dev->parent,
+ &hwreq->req, hwep->dir);
+ if (ret)
+ return ret;
+
+ /*
+ * The first buffer could be not page aligned.
+ * In that case we have to span into one extra td.
+ */
+ if (hwreq->req.dma % PAGE_SIZE)
+ pages--;
+
+ if (rest == 0) {
+ ret = add_td_to_list(hwep, hwreq, 0);
+ if (ret < 0)
+ goto done;
+ }
+
+ while (rest > 0) {
+ unsigned count = min(hwreq->req.length - hwreq->req.actual,
+ (unsigned)(pages * CI_HDRC_PAGE_SIZE));
+ ret = add_td_to_list(hwep, hwreq, count);
+ if (ret < 0)
+ goto done;
+
+ rest -= count;
+ }
+
+ if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
+ && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
+ ret = add_td_to_list(hwep, hwreq, 0);
+ if (ret < 0)
+ goto done;
+ }
+
+ firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
+
+ lastnode = list_entry(hwreq->tds.prev,
+ struct td_node, td);
+
+ lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
+ if (!hwreq->req.no_interrupt)
+ lastnode->ptr->token |= cpu_to_le32(TD_IOC);
+ wmb();
+
+ hwreq->req.actual = 0;
+ if (!list_empty(&hwep->qh.queue)) {
+ struct ci_hw_req *hwreqprev;
+ int n = hw_ep_bit(hwep->num, hwep->dir);
+ int tmp_stat;
+ struct td_node *prevlastnode;
+ u32 next = firstnode->dma & TD_ADDR_MASK;
+
+ hwreqprev = list_entry(hwep->qh.queue.prev,
+ struct ci_hw_req, queue);
+ prevlastnode = list_entry(hwreqprev->tds.prev,
+ struct td_node, td);
+
+ prevlastnode->ptr->next = cpu_to_le32(next);
+ wmb();
+ if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
+ goto done;
+ do {
+ hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+ tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
+ } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
+ hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
+ if (tmp_stat)
+ goto done;
+ }
+
+ /* QH configuration */
+ hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
+ hwep->qh.ptr->td.token &=
+ cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
+
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
+ u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
+ mul++;
+ hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
+ }
+
+ ret = hw_ep_prime(ci, hwep->num, hwep->dir,
+ hwep->type == USB_ENDPOINT_XFER_CONTROL);
+done:
+ return ret;
+}
+
+/*
+ * free_pending_td: remove a pending request for the endpoint
+ * @hwep: endpoint
+ */
+static void free_pending_td(struct ci_hw_ep *hwep)
+{
+ struct td_node *pending = hwep->pending_td;
+
+ dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
+ hwep->pending_td = NULL;
+ kfree(pending);
+}
+
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+ struct td_node *node)
+{
+ hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
+ hwep->qh.ptr->td.token &=
+ cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
+
+ return hw_ep_prime(ci, hwep->num, hwep->dir,
+ hwep->type == USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * _hardware_dequeue: handles a request at hardware level
+ * @gadget: gadget
+ * @hwep: endpoint
+ *
+ * This function returns an error code
+ */
+static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+ u32 tmptoken;
+ struct td_node *node, *tmpnode;
+ unsigned remaining_length;
+ unsigned actual = hwreq->req.length;
+ struct ci_hdrc *ci = hwep->ci;
+
+ if (hwreq->req.status != -EALREADY)
+ return -EINVAL;
+
+ hwreq->req.status = 0;
+
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ tmptoken = le32_to_cpu(node->ptr->token);
+ if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
+ int n = hw_ep_bit(hwep->num, hwep->dir);
+
+ if (ci->rev == CI_REVISION_24)
+ if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+ reprime_dtd(ci, hwep, node);
+ hwreq->req.status = -EALREADY;
+ return -EBUSY;
+ }
+
+ remaining_length = (tmptoken & TD_TOTAL_BYTES);
+ remaining_length >>= __ffs(TD_TOTAL_BYTES);
+ actual -= remaining_length;
+
+ hwreq->req.status = tmptoken & TD_STATUS;
+ if ((TD_STATUS_HALTED & hwreq->req.status)) {
+ hwreq->req.status = -EPIPE;
+ break;
+ } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
+ hwreq->req.status = -EPROTO;
+ break;
+ } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
+ hwreq->req.status = -EILSEQ;
+ break;
+ }
+
+ if (remaining_length) {
+ if (hwep->dir == TX) {
+ hwreq->req.status = -EPROTO;
+ break;
+ }
+ }
+ /*
+ * As the hardware could still address the freed td
+ * which will run the udc unusable, the cleanup of the
+ * td has to be delayed by one.
+ */
+ if (hwep->pending_td)
+ free_pending_td(hwep);
+
+ hwep->pending_td = node;
+ list_del_init(&node->td);
+ }
+
+ usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent,
+ &hwreq->req, hwep->dir);
+
+ hwreq->req.actual += actual;
+
+ if (hwreq->req.status)
+ return hwreq->req.status;
+
+ return hwreq->req.actual;
+}
+
+/**
+ * _ep_nuke: dequeues all endpoint requests
+ * @hwep: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int _ep_nuke(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+ struct td_node *node, *tmpnode;
+ if (hwep == NULL)
+ return -EINVAL;
+
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+ while (!list_empty(&hwep->qh.queue)) {
+
+ /* pop oldest request */
+ struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
+ struct ci_hw_req, queue);
+
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+ list_del_init(&node->td);
+ node->ptr = NULL;
+ kfree(node);
+ }
+
+ list_del_init(&hwreq->queue);
+ hwreq->req.status = -ESHUTDOWN;
+
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
+ spin_lock(hwep->lock);
+ }
+ }
+
+ if (hwep->pending_td)
+ free_pending_td(hwep);
+
+ return 0;
+}
+
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int direction, retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ if (value && hwep->dir == TX && check_transfer &&
+ !list_empty(&hwep->qh.queue) &&
+ !usb_endpoint_xfer_control(hwep->ep.desc)) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return -EAGAIN;
+ }
+
+ direction = hwep->dir;
+ do {
+ retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+ if (!value)
+ hwep->wedge = 0;
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+ } while (hwep->dir != direction);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+
+/**
+ * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
+ * @gadget: gadget
+ *
+ * This function returns an error code
+ */
+static int _gadget_stop_activity(struct usb_gadget *gadget)
+{
+ struct usb_ep *ep;
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ci->lock, flags);
+ ci->gadget.speed = USB_SPEED_UNKNOWN;
+ ci->remote_wakeup = 0;
+ ci->suspended = 0;
+ spin_unlock_irqrestore(&ci->lock, flags);
+
+ /* flush all endpoints */
+ gadget_for_each_ep(ep, gadget) {
+ usb_ep_fifo_flush(ep);
+ }
+ usb_ep_fifo_flush(&ci->ep0out->ep);
+ usb_ep_fifo_flush(&ci->ep0in->ep);
+
+ /* make sure to disable all endpoints */
+ gadget_for_each_ep(ep, gadget) {
+ usb_ep_disable(ep);
+ }
+
+ if (ci->status != NULL) {
+ usb_ep_free_request(&ci->ep0in->ep, ci->status);
+ ci->status = NULL;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ * ISR block
+ *****************************************************************************/
+/**
+ * isr_reset_handler: USB reset interrupt handler
+ * @ci: UDC device
+ *
+ * This function resets USB engine after a bus reset occurred
+ */
+static void isr_reset_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+ int retval;
+
+ spin_unlock(&ci->lock);
+ if (ci->gadget.speed != USB_SPEED_UNKNOWN)
+ usb_gadget_udc_reset(&ci->gadget, ci->driver);
+
+ retval = _gadget_stop_activity(&ci->gadget);
+ if (retval)
+ goto done;
+
+ retval = hw_usb_reset(ci);
+ if (retval)
+ goto done;
+
+ ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
+ if (ci->status == NULL)
+ retval = -ENOMEM;
+
+done:
+ spin_lock(&ci->lock);
+
+ if (retval)
+ dev_err(ci->dev, "error: %i\n", retval);
+}
+
+/**
+ * isr_get_status_complete: get_status request complete function
+ * @ep: endpoint
+ * @req: request handled
+ *
+ * Caller must release lock
+ */
+static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ if (ep == NULL || req == NULL)
+ return;
+
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+}
+
+/**
+ * _ep_queue: queues (submits) an I/O request to an endpoint
+ * @ep: endpoint
+ * @req: request
+ * @gfp_flags: GFP flags (not used)
+ *
+ * Caller must hold lock
+ * This function returns an error code
+ */
+static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
+ gfp_t __maybe_unused gfp_flags)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+ struct ci_hdrc *ci = hwep->ci;
+ int retval = 0;
+
+ if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+ if (req->length)
+ hwep = (ci->ep0_dir == RX) ?
+ ci->ep0out : ci->ep0in;
+ if (!list_empty(&hwep->qh.queue)) {
+ _ep_nuke(hwep);
+ dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
+ _usb_addr(hwep));
+ }
+ }
+
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
+ hwreq->req.length > hwep->ep.mult * hwep->ep.maxpacket) {
+ dev_err(hwep->ci->dev, "request length too big for isochronous\n");
+ return -EMSGSIZE;
+ }
+
+ /* first nuke then test link, e.g. previous status has not sent */
+ if (!list_empty(&hwreq->queue)) {
+ dev_err(hwep->ci->dev, "request already in queue\n");
+ return -EBUSY;
+ }
+
+ /* push request */
+ hwreq->req.status = -EINPROGRESS;
+ hwreq->req.actual = 0;
+
+ retval = _hardware_enqueue(hwep, hwreq);
+
+ if (retval == -EALREADY)
+ retval = 0;
+ if (!retval)
+ list_add_tail(&hwreq->queue, &hwep->qh.queue);
+
+ return retval;
+}
+
+/**
+ * isr_get_status_response: get_status request response
+ * @ci: ci struct
+ * @setup: setup request packet
+ *
+ * This function returns an error code
+ */
+static int isr_get_status_response(struct ci_hdrc *ci,
+ struct usb_ctrlrequest *setup)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+ struct ci_hw_ep *hwep = ci->ep0in;
+ struct usb_request *req = NULL;
+ gfp_t gfp_flags = GFP_ATOMIC;
+ int dir, num, retval;
+
+ if (hwep == NULL || setup == NULL)
+ return -EINVAL;
+
+ spin_unlock(hwep->lock);
+ req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
+ spin_lock(hwep->lock);
+ if (req == NULL)
+ return -ENOMEM;
+
+ req->complete = isr_get_status_complete;
+ req->length = 2;
+ req->buf = kzalloc(req->length, gfp_flags);
+ if (req->buf == NULL) {
+ retval = -ENOMEM;
+ goto err_free_req;
+ }
+
+ if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+ *(u16 *)req->buf = (ci->remote_wakeup << 1) |
+ ci->gadget.is_selfpowered;
+ } else if ((setup->bRequestType & USB_RECIP_MASK) \
+ == USB_RECIP_ENDPOINT) {
+ dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
+ TX : RX;
+ num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+ *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
+ }
+ /* else do nothing; reserved for future use */
+
+ retval = _ep_queue(&hwep->ep, req, gfp_flags);
+ if (retval)
+ goto err_free_buf;
+
+ return 0;
+
+ err_free_buf:
+ kfree(req->buf);
+ err_free_req:
+ spin_unlock(hwep->lock);
+ usb_ep_free_request(&hwep->ep, req);
+ spin_lock(hwep->lock);
+ return retval;
+}
+
+/**
+ * isr_setup_status_complete: setup_status request complete function
+ * @ep: endpoint
+ * @req: request handled
+ *
+ * Caller must release lock. Put the port in test mode if test mode
+ * feature is selected.
+ */
+static void
+isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct ci_hdrc *ci = req->context;
+ unsigned long flags;
+
+ if (ci->setaddr) {
+ hw_usb_set_address(ci, ci->address);
+ ci->setaddr = false;
+ if (ci->address)
+ usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
+ }
+
+ spin_lock_irqsave(&ci->lock, flags);
+ if (ci->test_mode)
+ hw_port_test_set(ci, ci->test_mode);
+ spin_unlock_irqrestore(&ci->lock, flags);
+}
+
+/**
+ * isr_setup_status_phase: queues the status phase of a setup transation
+ * @ci: ci struct
+ *
+ * This function returns an error code
+ */
+static int isr_setup_status_phase(struct ci_hdrc *ci)
+{
+ struct ci_hw_ep *hwep;
+
+ /*
+ * Unexpected USB controller behavior, caused by bad signal integrity
+ * or ground reference problems, can lead to isr_setup_status_phase
+ * being called with ci->status equal to NULL.
+ * If this situation occurs, you should review your USB hardware design.
+ */
+ if (WARN_ON_ONCE(!ci->status))
+ return -EPIPE;
+
+ hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+ ci->status->context = ci;
+ ci->status->complete = isr_setup_status_complete;
+
+ return _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
+}
+
+/**
+ * isr_tr_complete_low: transaction complete low level handler
+ * @hwep: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int isr_tr_complete_low(struct ci_hw_ep *hwep)
+__releases(hwep->lock)
+__acquires(hwep->lock)
+{
+ struct ci_hw_req *hwreq, *hwreqtemp;
+ struct ci_hw_ep *hweptemp = hwep;
+ int retval = 0;
+
+ list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
+ queue) {
+ retval = _hardware_dequeue(hwep, hwreq);
+ if (retval < 0)
+ break;
+ list_del_init(&hwreq->queue);
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
+ hwreq->req.length)
+ hweptemp = hwep->ci->ep0in;
+ usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
+ spin_lock(hwep->lock);
+ }
+ }
+
+ if (retval == -EBUSY)
+ retval = 0;
+
+ return retval;
+}
+
+static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
+{
+ dev_warn(&ci->gadget.dev,
+ "connect the device to an alternate port if you want HNP\n");
+ return isr_setup_status_phase(ci);
+}
+
+/**
+ * isr_setup_packet_handler: setup packet handler
+ * @ci: UDC descriptor
+ *
+ * This function handles setup packet
+ */
+static void isr_setup_packet_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
+ struct usb_ctrlrequest req;
+ int type, num, dir, err = -EINVAL;
+ u8 tmode = 0;
+
+ /*
+ * Flush data and handshake transactions of previous
+ * setup packet.
+ */
+ _ep_nuke(ci->ep0out);
+ _ep_nuke(ci->ep0in);
+
+ /* read_setup_packet */
+ do {
+ hw_test_and_set_setup_guard(ci);
+ memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
+ } while (!hw_test_and_clear_setup_guard(ci));
+
+ type = req.bRequestType;
+
+ ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+
+ switch (req.bRequest) {
+ case USB_REQ_CLEAR_FEATURE:
+ if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+ le16_to_cpu(req.wValue) ==
+ USB_ENDPOINT_HALT) {
+ if (req.wLength != 0)
+ break;
+ num = le16_to_cpu(req.wIndex);
+ dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
+ num &= USB_ENDPOINT_NUMBER_MASK;
+ if (dir == TX)
+ num += ci->hw_ep_max / 2;
+ if (!ci->ci_hw_ep[num].wedge) {
+ spin_unlock(&ci->lock);
+ err = usb_ep_clear_halt(
+ &ci->ci_hw_ep[num].ep);
+ spin_lock(&ci->lock);
+ if (err)
+ break;
+ }
+ err = isr_setup_status_phase(ci);
+ } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
+ le16_to_cpu(req.wValue) ==
+ USB_DEVICE_REMOTE_WAKEUP) {
+ if (req.wLength != 0)
+ break;
+ ci->remote_wakeup = 0;
+ err = isr_setup_status_phase(ci);
+ } else {
+ goto delegate;
+ }
+ break;
+ case USB_REQ_GET_STATUS:
+ if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) ||
+ le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) &&
+ type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
+ type != (USB_DIR_IN|USB_RECIP_INTERFACE))
+ goto delegate;
+ if (le16_to_cpu(req.wLength) != 2 ||
+ le16_to_cpu(req.wValue) != 0)
+ break;
+ err = isr_get_status_response(ci, &req);
+ break;
+ case USB_REQ_SET_ADDRESS:
+ if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
+ goto delegate;
+ if (le16_to_cpu(req.wLength) != 0 ||
+ le16_to_cpu(req.wIndex) != 0)
+ break;
+ ci->address = (u8)le16_to_cpu(req.wValue);
+ ci->setaddr = true;
+ err = isr_setup_status_phase(ci);
+ break;
+ case USB_REQ_SET_FEATURE:
+ if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+ le16_to_cpu(req.wValue) ==
+ USB_ENDPOINT_HALT) {
+ if (req.wLength != 0)
+ break;
+ num = le16_to_cpu(req.wIndex);
+ dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
+ num &= USB_ENDPOINT_NUMBER_MASK;
+ if (dir == TX)
+ num += ci->hw_ep_max / 2;
+
+ spin_unlock(&ci->lock);
+ err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
+ spin_lock(&ci->lock);
+ if (!err)
+ isr_setup_status_phase(ci);
+ } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
+ if (req.wLength != 0)
+ break;
+ switch (le16_to_cpu(req.wValue)) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ ci->remote_wakeup = 1;
+ err = isr_setup_status_phase(ci);
+ break;
+ case USB_DEVICE_TEST_MODE:
+ tmode = le16_to_cpu(req.wIndex) >> 8;
+ switch (tmode) {
+ case TEST_J:
+ case TEST_K:
+ case TEST_SE0_NAK:
+ case TEST_PACKET:
+ case TEST_FORCE_EN:
+ ci->test_mode = tmode;
+ err = isr_setup_status_phase(
+ ci);
+ break;
+ default:
+ break;
+ }
+ break;
+ case USB_DEVICE_B_HNP_ENABLE:
+ if (ci_otg_is_fsm_mode(ci)) {
+ ci->gadget.b_hnp_enable = 1;
+ err = isr_setup_status_phase(
+ ci);
+ }
+ break;
+ case USB_DEVICE_A_ALT_HNP_SUPPORT:
+ if (ci_otg_is_fsm_mode(ci))
+ err = otg_a_alt_hnp_support(ci);
+ break;
+ case USB_DEVICE_A_HNP_SUPPORT:
+ if (ci_otg_is_fsm_mode(ci)) {
+ ci->gadget.a_hnp_support = 1;
+ err = isr_setup_status_phase(
+ ci);
+ }
+ break;
+ default:
+ goto delegate;
+ }
+ } else {
+ goto delegate;
+ }
+ break;
+ default:
+delegate:
+ if (req.wLength == 0) /* no data phase */
+ ci->ep0_dir = TX;
+
+ spin_unlock(&ci->lock);
+ err = ci->driver->setup(&ci->gadget, &req);
+ spin_lock(&ci->lock);
+ break;
+ }
+
+ if (err < 0) {
+ spin_unlock(&ci->lock);
+ if (_ep_set_halt(&hwep->ep, 1, false))
+ dev_err(ci->dev, "error: _ep_set_halt\n");
+ spin_lock(&ci->lock);
+ }
+}
+
+/**
+ * isr_tr_complete_handler: transaction complete interrupt handler
+ * @ci: UDC descriptor
+ *
+ * This function handles traffic events
+ */
+static void isr_tr_complete_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+ unsigned i;
+ int err;
+
+ for (i = 0; i < ci->hw_ep_max; i++) {
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
+
+ if (hwep->ep.desc == NULL)
+ continue; /* not configured */
+
+ if (hw_test_and_clear_complete(ci, i)) {
+ err = isr_tr_complete_low(hwep);
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+ if (err > 0) /* needs status phase */
+ err = isr_setup_status_phase(ci);
+ if (err < 0) {
+ spin_unlock(&ci->lock);
+ if (_ep_set_halt(&hwep->ep, 1, false))
+ dev_err(ci->dev,
+ "error: _ep_set_halt\n");
+ spin_lock(&ci->lock);
+ }
+ }
+ }
+
+ /* Only handle setup packet below */
+ if (i == 0 &&
+ hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
+ isr_setup_packet_handler(ci);
+ }
+}
+
+/******************************************************************************
+ * ENDPT block
+ *****************************************************************************/
+/**
+ * ep_enable: configure endpoint, making it usable
+ *
+ * Check usb_ep_enable() at "usb_gadget.h" for details
+ */
+static int ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int retval = 0;
+ unsigned long flags;
+ u32 cap = 0;
+
+ if (ep == NULL || desc == NULL)
+ return -EINVAL;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ /* only internal SW should enable ctrl endpts */
+
+ if (!list_empty(&hwep->qh.queue)) {
+ dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return -EBUSY;
+ }
+
+ hwep->ep.desc = desc;
+
+ hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX;
+ hwep->num = usb_endpoint_num(desc);
+ hwep->type = usb_endpoint_type(desc);
+
+ hwep->ep.maxpacket = usb_endpoint_maxp(desc);
+ hwep->ep.mult = usb_endpoint_maxp_mult(desc);
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ cap |= QH_IOS;
+
+ cap |= QH_ZLT;
+ cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+ /*
+ * For ISO-TX, we set mult at QH as the largest value, and use
+ * MultO at TD as real mult value.
+ */
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+ cap |= 3 << __ffs(QH_MULT);
+
+ hwep->qh.ptr->cap = cpu_to_le32(cap);
+
+ hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
+
+ if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+ dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
+ retval = -EINVAL;
+ }
+
+ /*
+ * Enable endpoints in the HW other than ep0 as ep0
+ * is always enabled
+ */
+ if (hwep->num)
+ retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
+ hwep->type);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+/**
+ * ep_disable: endpoint is no longer usable
+ *
+ * Check usb_ep_disable() at "usb_gadget.h" for details
+ */
+static int ep_disable(struct usb_ep *ep)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int direction, retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL)
+ return -EINVAL;
+ else if (hwep->ep.desc == NULL)
+ return -EBUSY;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ /* only internal SW should disable ctrl endpts */
+
+ direction = hwep->dir;
+ do {
+ retval |= _ep_nuke(hwep);
+ retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+ } while (hwep->dir != direction);
+
+ hwep->ep.desc = NULL;
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+/**
+ * ep_alloc_request: allocate a request object to use with this endpoint
+ *
+ * Check usb_ep_alloc_request() at "usb_gadget.h" for details
+ */
+static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+ struct ci_hw_req *hwreq = NULL;
+
+ if (ep == NULL)
+ return NULL;
+
+ hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
+ if (hwreq != NULL) {
+ INIT_LIST_HEAD(&hwreq->queue);
+ INIT_LIST_HEAD(&hwreq->tds);
+ }
+
+ return (hwreq == NULL) ? NULL : &hwreq->req;
+}
+
+/**
+ * ep_free_request: frees a request object
+ *
+ * Check usb_ep_free_request() at "usb_gadget.h" for details
+ */
+static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+ struct td_node *node, *tmpnode;
+ unsigned long flags;
+
+ if (ep == NULL || req == NULL) {
+ return;
+ } else if (!list_empty(&hwreq->queue)) {
+ dev_err(hwep->ci->dev, "freeing queued request\n");
+ return;
+ }
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+ list_del_init(&node->td);
+ node->ptr = NULL;
+ kfree(node);
+ }
+
+ kfree(hwreq);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+}
+
+/**
+ * ep_queue: queues (submits) an I/O request to an endpoint
+ *
+ * Check usb_ep_queue()* at usb_gadget.h" for details
+ */
+static int ep_queue(struct usb_ep *ep, struct usb_request *req,
+ gfp_t __maybe_unused gfp_flags)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ spin_lock_irqsave(hwep->lock, flags);
+ retval = _ep_queue(ep, req, gfp_flags);
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+/**
+ * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
+ *
+ * Check usb_ep_dequeue() at "usb_gadget.h" for details
+ */
+static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
+ unsigned long flags;
+ struct td_node *node, *tmpnode;
+
+ if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
+ hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
+ list_empty(&hwep->qh.queue))
+ return -EINVAL;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+ list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+ dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+ list_del(&node->td);
+ kfree(node);
+ }
+
+ /* pop request */
+ list_del_init(&hwreq->queue);
+
+ usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
+
+ req->status = -ECONNRESET;
+
+ if (hwreq->req.complete != NULL) {
+ spin_unlock(hwep->lock);
+ usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
+ spin_lock(hwep->lock);
+ }
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return 0;
+}
+
+/**
+ * ep_set_halt: sets the endpoint halt feature
+ *
+ * Check usb_ep_set_halt() at "usb_gadget.h" for details
+ */
+static int ep_set_halt(struct usb_ep *ep, int value)
+{
+ return _ep_set_halt(ep, value, true);
+}
+
+/**
+ * ep_set_wedge: sets the halt feature and ignores clear requests
+ *
+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
+ */
+static int ep_set_wedge(struct usb_ep *ep)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ unsigned long flags;
+
+ if (ep == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ spin_lock_irqsave(hwep->lock, flags);
+ hwep->wedge = 1;
+ spin_unlock_irqrestore(hwep->lock, flags);
+
+ return usb_ep_set_halt(ep);
+}
+
+/**
+ * ep_fifo_flush: flushes contents of a fifo
+ *
+ * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
+ */
+static void ep_fifo_flush(struct usb_ep *ep)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ unsigned long flags;
+
+ if (ep == NULL) {
+ dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
+ return;
+ }
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+}
+
+/**
+ * Endpoint-specific part of the API to the USB controller hardware
+ * Check "usb_gadget.h" for details
+ */
+static const struct usb_ep_ops usb_ep_ops = {
+ .enable = ep_enable,
+ .disable = ep_disable,
+ .alloc_request = ep_alloc_request,
+ .free_request = ep_free_request,
+ .queue = ep_queue,
+ .dequeue = ep_dequeue,
+ .set_halt = ep_set_halt,
+ .set_wedge = ep_set_wedge,
+ .fifo_flush = ep_fifo_flush,
+};
+
+/******************************************************************************
+ * GADGET block
+ *****************************************************************************/
+static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+ unsigned long flags;
+ int gadget_ready = 0;
+
+ spin_lock_irqsave(&ci->lock, flags);
+ ci->vbus_active = is_active;
+ if (ci->driver)
+ gadget_ready = 1;
+ spin_unlock_irqrestore(&ci->lock, flags);
+
+ if (ci->usb_phy)
+ usb_phy_set_charger_state(ci->usb_phy, is_active ?
+ USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
+
+ if (gadget_ready) {
+ if (is_active) {
+ pm_runtime_get_sync(&_gadget->dev);
+ hw_device_reset(ci);
+ hw_device_state(ci, ci->ep0out->qh.dma);
+ usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+ usb_udc_vbus_handler(_gadget, true);
+ } else {
+ usb_udc_vbus_handler(_gadget, false);
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
+ hw_device_state(ci, 0);
+ if (ci->platdata->notify_event)
+ ci->platdata->notify_event(ci,
+ CI_HDRC_CONTROLLER_STOPPED_EVENT);
+ _gadget_stop_activity(&ci->gadget);
+ pm_runtime_put_sync(&_gadget->dev);
+ usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
+ }
+ }
+
+ return 0;
+}
+
+static int ci_udc_wakeup(struct usb_gadget *_gadget)
+{
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&ci->lock, flags);
+ if (!ci->remote_wakeup) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+ if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
+ ret = -EINVAL;
+ goto out;
+ }
+ hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+out:
+ spin_unlock_irqrestore(&ci->lock, flags);
+ return ret;
+}
+
+static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
+{
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+ if (ci->usb_phy)
+ return usb_phy_set_power(ci->usb_phy, ma);
+ return -ENOTSUPP;
+}
+
+static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
+{
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+ struct ci_hw_ep *hwep = ci->ep0in;
+ unsigned long flags;
+
+ spin_lock_irqsave(hwep->lock, flags);
+ _gadget->is_selfpowered = (is_on != 0);
+ spin_unlock_irqrestore(hwep->lock, flags);
+
+ return 0;
+}
+
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+ /*
+ * Data+ pullup controlled by OTG state machine in OTG fsm mode;
+ * and don't touch Data+ in host mode for dual role config.
+ */
+ if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST)
+ return 0;
+
+ pm_runtime_get_sync(&ci->gadget.dev);
+ if (is_on)
+ hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+ else
+ hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+ pm_runtime_put_sync(&ci->gadget.dev);
+
+ return 0;
+}
+
+static int ci_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver);
+static int ci_udc_stop(struct usb_gadget *gadget);
+/**
+ * Device operations part of the API to the USB controller hardware,
+ * which don't involve endpoints (or i/o)
+ * Check "usb_gadget.h" for details
+ */
+static const struct usb_gadget_ops usb_gadget_ops = {
+ .vbus_session = ci_udc_vbus_session,
+ .wakeup = ci_udc_wakeup,
+ .set_selfpowered = ci_udc_selfpowered,
+ .pullup = ci_udc_pullup,
+ .vbus_draw = ci_udc_vbus_draw,
+ .udc_start = ci_udc_start,
+ .udc_stop = ci_udc_stop,
+};
+
+static int init_eps(struct ci_hdrc *ci)
+{
+ int retval = 0, i, j;
+
+ for (i = 0; i < ci->hw_ep_max/2; i++)
+ for (j = RX; j <= TX; j++) {
+ int k = i + j * ci->hw_ep_max/2;
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
+
+ scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
+ (j == TX) ? "in" : "out");
+
+ hwep->ci = ci;
+ hwep->lock = &ci->lock;
+ hwep->td_pool = ci->td_pool;
+
+ hwep->ep.name = hwep->name;
+ hwep->ep.ops = &usb_ep_ops;
+
+ if (i == 0) {
+ hwep->ep.caps.type_control = true;
+ } else {
+ hwep->ep.caps.type_iso = true;
+ hwep->ep.caps.type_bulk = true;
+ hwep->ep.caps.type_int = true;
+ }
+
+ if (j == TX)
+ hwep->ep.caps.dir_in = true;
+ else
+ hwep->ep.caps.dir_out = true;
+
+ /*
+ * for ep0: maxP defined in desc, for other
+ * eps, maxP is set by epautoconfig() called
+ * by gadget layer
+ */
+ usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
+
+ INIT_LIST_HEAD(&hwep->qh.queue);
+ hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL,
+ &hwep->qh.dma);
+ if (hwep->qh.ptr == NULL)
+ retval = -ENOMEM;
+
+ /*
+ * set up shorthands for ep0 out and in endpoints,
+ * don't add to gadget's ep_list
+ */
+ if (i == 0) {
+ if (j == RX)
+ ci->ep0out = hwep;
+ else
+ ci->ep0in = hwep;
+
+ usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
+ continue;
+ }
+
+ list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
+ }
+
+ return retval;
+}
+
+static void destroy_eps(struct ci_hdrc *ci)
+{
+ int i;
+
+ for (i = 0; i < ci->hw_ep_max; i++) {
+ struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
+
+ if (hwep->pending_td)
+ free_pending_td(hwep);
+ dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
+ }
+}
+
+/**
+ * ci_udc_start: register a gadget driver
+ * @gadget: our gadget
+ * @driver: the driver being registered
+ *
+ * Interrupts are enabled here.
+ */
+static int ci_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+ int retval = -ENOMEM;
+
+ if (driver->disconnect == NULL)
+ return -EINVAL;
+
+
+ ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
+ retval = usb_ep_enable(&ci->ep0out->ep);
+ if (retval)
+ return retval;
+
+ ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
+ retval = usb_ep_enable(&ci->ep0in->ep);
+ if (retval)
+ return retval;
+
+ ci->driver = driver;
+
+ /* Start otg fsm for B-device */
+ if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
+ ci_hdrc_otg_fsm_start(ci);
+ return retval;
+ }
+
+ pm_runtime_get_sync(&ci->gadget.dev);
+ if (ci->vbus_active) {
+ hw_device_reset(ci);
+ } else {
+ usb_udc_vbus_handler(&ci->gadget, false);
+ pm_runtime_put_sync(&ci->gadget.dev);
+ return retval;
+ }
+
+ retval = hw_device_state(ci, ci->ep0out->qh.dma);
+ if (retval)
+ pm_runtime_put_sync(&ci->gadget.dev);
+
+ return retval;
+}
+
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+ if (!ci_otg_is_fsm_mode(ci))
+ return;
+
+ mutex_lock(&ci->fsm.lock);
+ if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+ ci->fsm.a_bidl_adis_tmout = 1;
+ ci_hdrc_otg_fsm_start(ci);
+ } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+ ci->fsm.protocol = PROTO_UNDEF;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+ }
+ mutex_unlock(&ci->fsm.lock);
+}
+
+/**
+ * ci_udc_stop: unregister a gadget driver
+ */
+static int ci_udc_stop(struct usb_gadget *gadget)
+{
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ci->lock, flags);
+
+ if (ci->vbus_active) {
+ hw_device_state(ci, 0);
+ spin_unlock_irqrestore(&ci->lock, flags);
+ if (ci->platdata->notify_event)
+ ci->platdata->notify_event(ci,
+ CI_HDRC_CONTROLLER_STOPPED_EVENT);
+ _gadget_stop_activity(&ci->gadget);
+ spin_lock_irqsave(&ci->lock, flags);
+ pm_runtime_put(&ci->gadget.dev);
+ }
+
+ ci->driver = NULL;
+ spin_unlock_irqrestore(&ci->lock, flags);
+
+ ci_udc_stop_for_otg_fsm(ci);
+ return 0;
+}
+
+/******************************************************************************
+ * BUS block
+ *****************************************************************************/
+/**
+ * udc_irq: ci interrupt handler
+ *
+ * This function returns IRQ_HANDLED if the IRQ has been handled
+ * It locks access to registers
+ */
+static irqreturn_t udc_irq(struct ci_hdrc *ci)
+{
+ irqreturn_t retval;
+ u32 intr;
+
+ if (ci == NULL)
+ return IRQ_HANDLED;
+
+ spin_lock(&ci->lock);
+
+ if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
+ if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
+ USBMODE_CM_DC) {
+ spin_unlock(&ci->lock);
+ return IRQ_NONE;
+ }
+ }
+ intr = hw_test_and_clear_intr_active(ci);
+
+ if (intr) {
+ /* order defines priority - do NOT change it */
+ if (USBi_URI & intr)
+ isr_reset_handler(ci);
+
+ if (USBi_PCI & intr) {
+ ci->gadget.speed = hw_port_is_high_speed(ci) ?
+ USB_SPEED_HIGH : USB_SPEED_FULL;
+ if (ci->suspended) {
+ if (ci->driver->resume) {
+ spin_unlock(&ci->lock);
+ ci->driver->resume(&ci->gadget);
+ spin_lock(&ci->lock);
+ }
+ ci->suspended = 0;
+ usb_gadget_set_state(&ci->gadget,
+ ci->resume_state);
+ }
+ }
+
+ if (USBi_UI & intr)
+ isr_tr_complete_handler(ci);
+
+ if ((USBi_SLI & intr) && !(ci->suspended)) {
+ ci->suspended = 1;
+ ci->resume_state = ci->gadget.state;
+ if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
+ ci->driver->suspend) {
+ spin_unlock(&ci->lock);
+ ci->driver->suspend(&ci->gadget);
+ spin_lock(&ci->lock);
+ }
+ usb_gadget_set_state(&ci->gadget,
+ USB_STATE_SUSPENDED);
+ }
+ retval = IRQ_HANDLED;
+ } else {
+ retval = IRQ_NONE;
+ }
+ spin_unlock(&ci->lock);
+
+ return retval;
+}
+
+/**
+ * udc_start: initialize gadget role
+ * @ci: chipidea controller
+ */
+static int udc_start(struct ci_hdrc *ci)
+{
+ struct device *dev = ci->dev;
+ struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
+ int retval = 0;
+
+ ci->gadget.ops = &usb_gadget_ops;
+ ci->gadget.speed = USB_SPEED_UNKNOWN;
+ ci->gadget.max_speed = USB_SPEED_HIGH;
+ ci->gadget.name = ci->platdata->name;
+ ci->gadget.otg_caps = otg_caps;
+
+ if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA)
+ ci->gadget.quirk_avoids_skb_reserve = 1;
+
+ if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
+ otg_caps->adp_support))
+ ci->gadget.is_otg = 1;
+
+ INIT_LIST_HEAD(&ci->gadget.ep_list);
+
+ /* alloc resources */
+ ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent,
+ sizeof(struct ci_hw_qh),
+ 64, CI_HDRC_PAGE_SIZE);
+ if (ci->qh_pool == NULL)
+ return -ENOMEM;
+
+ ci->td_pool = dma_pool_create("ci_hw_td", dev->parent,
+ sizeof(struct ci_hw_td),
+ 64, CI_HDRC_PAGE_SIZE);
+ if (ci->td_pool == NULL) {
+ retval = -ENOMEM;
+ goto free_qh_pool;
+ }
+
+ retval = init_eps(ci);
+ if (retval)
+ goto free_pools;
+
+ ci->gadget.ep0 = &ci->ep0in->ep;
+
+ retval = usb_add_gadget_udc(dev, &ci->gadget);
+ if (retval)
+ goto destroy_eps;
+
+ pm_runtime_no_callbacks(&ci->gadget.dev);
+ pm_runtime_enable(&ci->gadget.dev);
+
+ return retval;
+
+destroy_eps:
+ destroy_eps(ci);
+free_pools:
+ dma_pool_destroy(ci->td_pool);
+free_qh_pool:
+ dma_pool_destroy(ci->qh_pool);
+ return retval;
+}
+
+/**
+ * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
+ *
+ * No interrupts active, the IRQ has been released
+ */
+void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
+{
+ if (!ci->roles[CI_ROLE_GADGET])
+ return;
+
+ usb_del_gadget_udc(&ci->gadget);
+
+ destroy_eps(ci);
+
+ dma_pool_destroy(ci->td_pool);
+ dma_pool_destroy(ci->qh_pool);
+}
+
+static int udc_id_switch_for_device(struct ci_hdrc *ci)
+{
+ if (ci->is_otg)
+ /* Clear and enable BSV irq */
+ hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
+ OTGSC_BSVIS | OTGSC_BSVIE);
+
+ return 0;
+}
+
+static void udc_id_switch_for_host(struct ci_hdrc *ci)
+{
+ /*
+ * host doesn't care B_SESSION_VALID event
+ * so clear and disbale BSV irq
+ */
+ if (ci->is_otg)
+ hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
+
+ ci->vbus_active = 0;
+}
+
+/**
+ * ci_hdrc_gadget_init - initialize device related bits
+ * ci: the controller
+ *
+ * This function initializes the gadget, if the device is "device capable".
+ */
+int ci_hdrc_gadget_init(struct ci_hdrc *ci)
+{
+ struct ci_role_driver *rdrv;
+ int ret;
+
+ if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
+ return -ENXIO;
+
+ rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL);
+ if (!rdrv)
+ return -ENOMEM;
+
+ rdrv->start = udc_id_switch_for_device;
+ rdrv->stop = udc_id_switch_for_host;
+ rdrv->irq = udc_irq;
+ rdrv->name = "gadget";
+
+ ret = udc_start(ci);
+ if (!ret)
+ ci->roles[CI_ROLE_GADGET] = rdrv;
+
+ return ret;
+}