v4.19.13 snapshot.
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
new file mode 100644
index 0000000..db4ceff
--- /dev/null
+++ b/drivers/usb/chipidea/otg.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * otg.c - ChipIdea USB IP core OTG driver
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Peter Chen
+ */
+
+/*
+ * This file mainly handles otgsc register, OTG fsm operations for HNP and SRP
+ * are also included.
+ */
+
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/**
+ * hw_read_otgsc returns otgsc register bits value.
+ * @mask: bitfield mask
+ */
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
+{
+ struct ci_hdrc_cable *cable;
+ u32 val = hw_read(ci, OP_OTGSC, mask);
+
+ /*
+ * If using extcon framework for VBUS and/or ID signal
+ * detection overwrite OTGSC register value
+ */
+ cable = &ci->platdata->vbus_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (cable->changed)
+ val |= OTGSC_BSVIS;
+ else
+ val &= ~OTGSC_BSVIS;
+
+ if (cable->connected)
+ val |= OTGSC_BSV;
+ else
+ val &= ~OTGSC_BSV;
+
+ if (cable->enabled)
+ val |= OTGSC_BSVIE;
+ else
+ val &= ~OTGSC_BSVIE;
+ }
+
+ cable = &ci->platdata->id_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (cable->changed)
+ val |= OTGSC_IDIS;
+ else
+ val &= ~OTGSC_IDIS;
+
+ if (cable->connected)
+ val &= ~OTGSC_ID; /* host */
+ else
+ val |= OTGSC_ID; /* device */
+
+ if (cable->enabled)
+ val |= OTGSC_IDIE;
+ else
+ val &= ~OTGSC_IDIE;
+ }
+
+ return val & mask;
+}
+
+/**
+ * hw_write_otgsc updates target bits of OTGSC register.
+ * @mask: bitfield mask
+ * @data: to be written
+ */
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
+{
+ struct ci_hdrc_cable *cable;
+
+ cable = &ci->platdata->vbus_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (data & mask & OTGSC_BSVIS)
+ cable->changed = false;
+
+ /* Don't enable vbus interrupt if using external notifier */
+ if (data & mask & OTGSC_BSVIE) {
+ cable->enabled = true;
+ data &= ~OTGSC_BSVIE;
+ } else if (mask & OTGSC_BSVIE) {
+ cable->enabled = false;
+ }
+ }
+
+ cable = &ci->platdata->id_extcon;
+ if (!IS_ERR(cable->edev)) {
+ if (data & mask & OTGSC_IDIS)
+ cable->changed = false;
+
+ /* Don't enable id interrupt if using external notifier */
+ if (data & mask & OTGSC_IDIE) {
+ cable->enabled = true;
+ data &= ~OTGSC_IDIE;
+ } else if (mask & OTGSC_IDIE) {
+ cable->enabled = false;
+ }
+ }
+
+ hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
+}
+
+/**
+ * ci_otg_role - pick role based on ID pin state
+ * @ci: the controller
+ */
+enum ci_role ci_otg_role(struct ci_hdrc *ci)
+{
+ enum ci_role role = hw_read_otgsc(ci, OTGSC_ID)
+ ? CI_ROLE_GADGET
+ : CI_ROLE_HOST;
+
+ return role;
+}
+
+void ci_handle_vbus_change(struct ci_hdrc *ci)
+{
+ if (!ci->is_otg)
+ return;
+
+ if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
+ usb_gadget_vbus_connect(&ci->gadget);
+ else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active)
+ usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * When we switch to device mode, the vbus value should be lower
+ * than OTGSC_BSV before connecting to host.
+ *
+ * @ci: the controller
+ *
+ * This function returns an error code if timeout
+ */
+static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
+{
+ unsigned long elapse = jiffies + msecs_to_jiffies(5000);
+ u32 mask = OTGSC_BSV;
+
+ while (hw_read_otgsc(ci, mask)) {
+ if (time_after(jiffies, elapse)) {
+ dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
+ mask);
+ return -ETIMEDOUT;
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+static void ci_handle_id_switch(struct ci_hdrc *ci)
+{
+ enum ci_role role = ci_otg_role(ci);
+
+ if (role != ci->role) {
+ dev_dbg(ci->dev, "switching from %s to %s\n",
+ ci_role(ci)->name, ci->roles[role]->name);
+
+ ci_role_stop(ci);
+
+ if (role == CI_ROLE_GADGET &&
+ IS_ERR(ci->platdata->vbus_extcon.edev))
+ /*
+ * Wait vbus lower than OTGSC_BSV before connecting
+ * to host. If connecting status is from an external
+ * connector instead of register, we don't need to
+ * care vbus on the board, since it will not affect
+ * external connector status.
+ */
+ hw_wait_vbus_lower_bsv(ci);
+
+ ci_role_start(ci, role);
+ /* vbus change may have already occurred */
+ if (role == CI_ROLE_GADGET)
+ ci_handle_vbus_change(ci);
+ }
+}
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+ struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
+
+ if (ci_otg_is_fsm_mode(ci) && !ci_otg_fsm_work(ci)) {
+ enable_irq(ci->irq);
+ return;
+ }
+
+ pm_runtime_get_sync(ci->dev);
+ if (ci->id_event) {
+ ci->id_event = false;
+ ci_handle_id_switch(ci);
+ } else if (ci->b_sess_valid_event) {
+ ci->b_sess_valid_event = false;
+ ci_handle_vbus_change(ci);
+ } else
+ dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+ pm_runtime_put_sync(ci->dev);
+
+ enable_irq(ci->irq);
+}
+
+
+/**
+ * ci_hdrc_otg_init - initialize otg struct
+ * ci: the controller
+ */
+int ci_hdrc_otg_init(struct ci_hdrc *ci)
+{
+ INIT_WORK(&ci->work, ci_otg_work);
+ ci->wq = create_freezable_workqueue("ci_otg");
+ if (!ci->wq) {
+ dev_err(ci->dev, "can't create workqueue\n");
+ return -ENODEV;
+ }
+
+ if (ci_otg_is_fsm_mode(ci))
+ return ci_hdrc_otg_fsm_init(ci);
+
+ return 0;
+}
+
+/**
+ * ci_hdrc_otg_destroy - destroy otg struct
+ * ci: the controller
+ */
+void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
+{
+ if (ci->wq) {
+ flush_workqueue(ci->wq);
+ destroy_workqueue(ci->wq);
+ }
+ /* Disable all OTG irq and clear status */
+ hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+ OTGSC_INT_STATUS_BITS);
+ if (ci_otg_is_fsm_mode(ci))
+ ci_hdrc_otg_fsm_remove(ci);
+}