v4.19.13 snapshot.
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
new file mode 100644
index 0000000..b37de1d
--- /dev/null
+++ b/drivers/spi/spi-rspi.c
@@ -0,0 +1,1393 @@
+/*
+ * SH RSPI driver
+ *
+ * Copyright (C) 2012, 2013 Renesas Solutions Corp.
+ * Copyright (C) 2014 Glider bvba
+ *
+ * Based on spi-sh.c:
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_dma.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/rspi.h>
+
+#define RSPI_SPCR 0x00 /* Control Register */
+#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
+#define RSPI_SPPCR 0x02 /* Pin Control Register */
+#define RSPI_SPSR 0x03 /* Status Register */
+#define RSPI_SPDR 0x04 /* Data Register */
+#define RSPI_SPSCR 0x08 /* Sequence Control Register */
+#define RSPI_SPSSR 0x09 /* Sequence Status Register */
+#define RSPI_SPBR 0x0a /* Bit Rate Register */
+#define RSPI_SPDCR 0x0b /* Data Control Register */
+#define RSPI_SPCKD 0x0c /* Clock Delay Register */
+#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
+#define RSPI_SPND 0x0e /* Next-Access Delay Register */
+#define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */
+#define RSPI_SPCMD0 0x10 /* Command Register 0 */
+#define RSPI_SPCMD1 0x12 /* Command Register 1 */
+#define RSPI_SPCMD2 0x14 /* Command Register 2 */
+#define RSPI_SPCMD3 0x16 /* Command Register 3 */
+#define RSPI_SPCMD4 0x18 /* Command Register 4 */
+#define RSPI_SPCMD5 0x1a /* Command Register 5 */
+#define RSPI_SPCMD6 0x1c /* Command Register 6 */
+#define RSPI_SPCMD7 0x1e /* Command Register 7 */
+#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2)
+#define RSPI_NUM_SPCMD 8
+#define RSPI_RZ_NUM_SPCMD 4
+#define QSPI_NUM_SPCMD 4
+
+/* RSPI on RZ only */
+#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
+#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
+
+/* QSPI only */
+#define QSPI_SPBFCR 0x18 /* Buffer Control Register */
+#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */
+#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */
+#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */
+#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */
+#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */
+#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4)
+
+/* SPCR - Control Register */
+#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
+#define SPCR_SPE 0x40 /* Function Enable */
+#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
+#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
+#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
+#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
+/* RSPI on SH only */
+#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
+#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
+/* QSPI on R-Car Gen2 only */
+#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */
+#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */
+
+/* SSLP - Slave Select Polarity Register */
+#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */
+#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */
+
+/* SPPCR - Pin Control Register */
+#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
+#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
+#define SPPCR_SPOM 0x04
+#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
+#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
+
+#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
+#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
+
+/* SPSR - Status Register */
+#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
+#define SPSR_TEND 0x40 /* Transmit End */
+#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
+#define SPSR_PERF 0x08 /* Parity Error Flag */
+#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
+#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
+#define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */
+
+/* SPSCR - Sequence Control Register */
+#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
+
+/* SPSSR - Sequence Status Register */
+#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
+#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
+
+/* SPDCR - Data Control Register */
+#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
+#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
+#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
+#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
+#define SPDCR_SPLWORD SPDCR_SPLW1
+#define SPDCR_SPLBYTE SPDCR_SPLW0
+#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
+#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */
+#define SPDCR_SLSEL1 0x08
+#define SPDCR_SLSEL0 0x04
+#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */
+#define SPDCR_SPFC1 0x02
+#define SPDCR_SPFC0 0x01
+#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */
+
+/* SPCKD - Clock Delay Register */
+#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
+
+/* SSLND - Slave Select Negation Delay Register */
+#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
+
+/* SPND - Next-Access Delay Register */
+#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
+
+/* SPCR2 - Control Register 2 */
+#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
+#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
+#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
+#define SPCR2_SPPE 0x01 /* Parity Enable */
+
+/* SPCMDn - Command Registers */
+#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
+#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
+#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
+#define SPCMD_LSBF 0x1000 /* LSB First */
+#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
+#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
+#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */
+#define SPCMD_SPB_16BIT 0x0100
+#define SPCMD_SPB_20BIT 0x0000
+#define SPCMD_SPB_24BIT 0x0100
+#define SPCMD_SPB_32BIT 0x0200
+#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
+#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */
+#define SPCMD_SPIMOD1 0x0040
+#define SPCMD_SPIMOD0 0x0020
+#define SPCMD_SPIMOD_SINGLE 0
+#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0
+#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1
+#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */
+#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */
+#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
+#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
+#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
+
+/* SPBFCR - Buffer Control Register */
+#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */
+#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
+#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
+#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
+/* QSPI on R-Car Gen2 */
+#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
+#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
+#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
+#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
+
+#define QSPI_BUFFER_SIZE 32u
+
+struct rspi_data {
+ void __iomem *addr;
+ u32 max_speed_hz;
+ struct spi_master *master;
+ wait_queue_head_t wait;
+ struct clk *clk;
+ u16 spcmd;
+ u8 spsr;
+ u8 sppcr;
+ int rx_irq, tx_irq;
+ const struct spi_ops *ops;
+
+ unsigned dma_callbacked:1;
+ unsigned byte_access:1;
+};
+
+static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset)
+{
+ iowrite8(data, rspi->addr + offset);
+}
+
+static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset)
+{
+ iowrite16(data, rspi->addr + offset);
+}
+
+static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset)
+{
+ iowrite32(data, rspi->addr + offset);
+}
+
+static u8 rspi_read8(const struct rspi_data *rspi, u16 offset)
+{
+ return ioread8(rspi->addr + offset);
+}
+
+static u16 rspi_read16(const struct rspi_data *rspi, u16 offset)
+{
+ return ioread16(rspi->addr + offset);
+}
+
+static void rspi_write_data(const struct rspi_data *rspi, u16 data)
+{
+ if (rspi->byte_access)
+ rspi_write8(rspi, data, RSPI_SPDR);
+ else /* 16 bit */
+ rspi_write16(rspi, data, RSPI_SPDR);
+}
+
+static u16 rspi_read_data(const struct rspi_data *rspi)
+{
+ if (rspi->byte_access)
+ return rspi_read8(rspi, RSPI_SPDR);
+ else /* 16 bit */
+ return rspi_read16(rspi, RSPI_SPDR);
+}
+
+/* optional functions */
+struct spi_ops {
+ int (*set_config_register)(struct rspi_data *rspi, int access_size);
+ int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer);
+ u16 mode_bits;
+ u16 flags;
+ u16 fifo_size;
+};
+
+/*
+ * functions for RSPI on legacy SH
+ */
+static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
+{
+ int spbr;
+
+ /* Sets output mode, MOSI signal, and (optionally) loopback */
+ rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
+
+ /* Sets transfer bit rate */
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
+ 2 * rspi->max_speed_hz) - 1;
+ rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+
+ /* Disable dummy transmission, set 16-bit word access, 1 frame */
+ rspi_write8(rspi, 0, RSPI_SPDCR);
+ rspi->byte_access = 0;
+
+ /* Sets RSPCK, SSL, next-access delay value */
+ rspi_write8(rspi, 0x00, RSPI_SPCKD);
+ rspi_write8(rspi, 0x00, RSPI_SSLND);
+ rspi_write8(rspi, 0x00, RSPI_SPND);
+
+ /* Sets parity, interrupt mask */
+ rspi_write8(rspi, 0x00, RSPI_SPCR2);
+
+ /* Sets SPCMD */
+ rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
+ rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
+
+ /* Sets RSPI mode */
+ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
+
+ return 0;
+}
+
+/*
+ * functions for RSPI on RZ
+ */
+static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
+{
+ int spbr;
+ int div = 0;
+ unsigned long clksrc;
+
+ /* Sets output mode, MOSI signal, and (optionally) loopback */
+ rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
+
+ clksrc = clk_get_rate(rspi->clk);
+ while (div < 3) {
+ if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
+ break;
+ div++;
+ clksrc /= 2;
+ }
+
+ /* Sets transfer bit rate */
+ spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1;
+ rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+ rspi->spcmd |= div << 2;
+
+ /* Disable dummy transmission, set byte access */
+ rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);
+ rspi->byte_access = 1;
+
+ /* Sets RSPCK, SSL, next-access delay value */
+ rspi_write8(rspi, 0x00, RSPI_SPCKD);
+ rspi_write8(rspi, 0x00, RSPI_SSLND);
+ rspi_write8(rspi, 0x00, RSPI_SPND);
+
+ /* Sets SPCMD */
+ rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
+ rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
+
+ /* Sets RSPI mode */
+ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
+
+ return 0;
+}
+
+/*
+ * functions for QSPI
+ */
+static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
+{
+ int spbr;
+
+ /* Sets output mode, MOSI signal, and (optionally) loopback */
+ rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
+
+ /* Sets transfer bit rate */
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz);
+ rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+
+ /* Disable dummy transmission, set byte access */
+ rspi_write8(rspi, 0, RSPI_SPDCR);
+ rspi->byte_access = 1;
+
+ /* Sets RSPCK, SSL, next-access delay value */
+ rspi_write8(rspi, 0x00, RSPI_SPCKD);
+ rspi_write8(rspi, 0x00, RSPI_SSLND);
+ rspi_write8(rspi, 0x00, RSPI_SPND);
+
+ /* Data Length Setting */
+ if (access_size == 8)
+ rspi->spcmd |= SPCMD_SPB_8BIT;
+ else if (access_size == 16)
+ rspi->spcmd |= SPCMD_SPB_16BIT;
+ else
+ rspi->spcmd |= SPCMD_SPB_32BIT;
+
+ rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN;
+
+ /* Resets transfer data length */
+ rspi_write32(rspi, 0, QSPI_SPBMUL0);
+
+ /* Resets transmit and receive buffer */
+ rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
+ /* Sets buffer to allow normal operation */
+ rspi_write8(rspi, 0x00, QSPI_SPBFCR);
+
+ /* Sets SPCMD */
+ rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
+
+ /* Sets RSPI mode */
+ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
+
+ return 0;
+}
+
+static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
+{
+ u8 data;
+
+ data = rspi_read8(rspi, reg);
+ data &= ~mask;
+ data |= (val & mask);
+ rspi_write8(rspi, data, reg);
+}
+
+static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
+ unsigned int len)
+{
+ unsigned int n;
+
+ n = min(len, QSPI_BUFFER_SIZE);
+
+ if (len >= QSPI_BUFFER_SIZE) {
+ /* sets triggering number to 32 bytes */
+ qspi_update(rspi, SPBFCR_TXTRG_MASK,
+ SPBFCR_TXTRG_32B, QSPI_SPBFCR);
+ } else {
+ /* sets triggering number to 1 byte */
+ qspi_update(rspi, SPBFCR_TXTRG_MASK,
+ SPBFCR_TXTRG_1B, QSPI_SPBFCR);
+ }
+
+ return n;
+}
+
+static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
+{
+ unsigned int n;
+
+ n = min(len, QSPI_BUFFER_SIZE);
+
+ if (len >= QSPI_BUFFER_SIZE) {
+ /* sets triggering number to 32 bytes */
+ qspi_update(rspi, SPBFCR_RXTRG_MASK,
+ SPBFCR_RXTRG_32B, QSPI_SPBFCR);
+ } else {
+ /* sets triggering number to 1 byte */
+ qspi_update(rspi, SPBFCR_RXTRG_MASK,
+ SPBFCR_RXTRG_1B, QSPI_SPBFCR);
+ }
+ return n;
+}
+
+#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
+
+static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
+{
+ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
+}
+
+static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable)
+{
+ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR);
+}
+
+static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask,
+ u8 enable_bit)
+{
+ int ret;
+
+ rspi->spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (rspi->spsr & wait_mask)
+ return 0;
+
+ rspi_enable_irq(rspi, enable_bit);
+ ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ);
+ if (ret == 0 && !(rspi->spsr & wait_mask))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi)
+{
+ return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
+}
+
+static inline int rspi_wait_for_rx_full(struct rspi_data *rspi)
+{
+ return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE);
+}
+
+static int rspi_data_out(struct rspi_data *rspi, u8 data)
+{
+ int error = rspi_wait_for_tx_empty(rspi);
+ if (error < 0) {
+ dev_err(&rspi->master->dev, "transmit timeout\n");
+ return error;
+ }
+ rspi_write_data(rspi, data);
+ return 0;
+}
+
+static int rspi_data_in(struct rspi_data *rspi)
+{
+ int error;
+ u8 data;
+
+ error = rspi_wait_for_rx_full(rspi);
+ if (error < 0) {
+ dev_err(&rspi->master->dev, "receive timeout\n");
+ return error;
+ }
+ data = rspi_read_data(rspi);
+ return data;
+}
+
+static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
+ unsigned int n)
+{
+ while (n-- > 0) {
+ if (tx) {
+ int ret = rspi_data_out(rspi, *tx++);
+ if (ret < 0)
+ return ret;
+ }
+ if (rx) {
+ int ret = rspi_data_in(rspi);
+ if (ret < 0)
+ return ret;
+ *rx++ = ret;
+ }
+ }
+
+ return 0;
+}
+
+static void rspi_dma_complete(void *arg)
+{
+ struct rspi_data *rspi = arg;
+
+ rspi->dma_callbacked = 1;
+ wake_up_interruptible(&rspi->wait);
+}
+
+static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
+ struct sg_table *rx)
+{
+ struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
+ u8 irq_mask = 0;
+ unsigned int other_irq = 0;
+ dma_cookie_t cookie;
+ int ret;
+
+ /* First prepare and submit the DMA request(s), as this may fail */
+ if (rx) {
+ desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
+ rx->sgl, rx->nents, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx) {
+ ret = -EAGAIN;
+ goto no_dma_rx;
+ }
+
+ desc_rx->callback = rspi_dma_complete;
+ desc_rx->callback_param = rspi;
+ cookie = dmaengine_submit(desc_rx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_rx;
+ }
+
+ irq_mask |= SPCR_SPRIE;
+ }
+
+ if (tx) {
+ desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
+ tx->sgl, tx->nents, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ ret = -EAGAIN;
+ goto no_dma_tx;
+ }
+
+ if (rx) {
+ /* No callback */
+ desc_tx->callback = NULL;
+ } else {
+ desc_tx->callback = rspi_dma_complete;
+ desc_tx->callback_param = rspi;
+ }
+ cookie = dmaengine_submit(desc_tx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_tx;
+ }
+
+ irq_mask |= SPCR_SPTIE;
+ }
+
+ /*
+ * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
+ * called. So, this driver disables the IRQ while DMA transfer.
+ */
+ if (tx)
+ disable_irq(other_irq = rspi->tx_irq);
+ if (rx && rspi->rx_irq != other_irq)
+ disable_irq(rspi->rx_irq);
+
+ rspi_enable_irq(rspi, irq_mask);
+ rspi->dma_callbacked = 0;
+
+ /* Now start DMA */
+ if (rx)
+ dma_async_issue_pending(rspi->master->dma_rx);
+ if (tx)
+ dma_async_issue_pending(rspi->master->dma_tx);
+
+ ret = wait_event_interruptible_timeout(rspi->wait,
+ rspi->dma_callbacked, HZ);
+ if (ret > 0 && rspi->dma_callbacked) {
+ ret = 0;
+ } else {
+ if (!ret) {
+ dev_err(&rspi->master->dev, "DMA timeout\n");
+ ret = -ETIMEDOUT;
+ }
+ if (tx)
+ dmaengine_terminate_all(rspi->master->dma_tx);
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+ }
+
+ rspi_disable_irq(rspi, irq_mask);
+
+ if (tx)
+ enable_irq(rspi->tx_irq);
+ if (rx && rspi->rx_irq != other_irq)
+ enable_irq(rspi->rx_irq);
+
+ return ret;
+
+no_dma_tx:
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+no_dma_rx:
+ if (ret == -EAGAIN) {
+ pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
+ dev_driver_string(&rspi->master->dev),
+ dev_name(&rspi->master->dev));
+ }
+ return ret;
+}
+
+static void rspi_receive_init(const struct rspi_data *rspi)
+{
+ u8 spsr;
+
+ spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPRF)
+ rspi_read_data(rspi); /* dummy read */
+ if (spsr & SPSR_OVRF)
+ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF,
+ RSPI_SPSR);
+}
+
+static void rspi_rz_receive_init(const struct rspi_data *rspi)
+{
+ rspi_receive_init(rspi);
+ rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR);
+ rspi_write8(rspi, 0, RSPI_SPBFCR);
+}
+
+static void qspi_receive_init(const struct rspi_data *rspi)
+{
+ u8 spsr;
+
+ spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPRF)
+ rspi_read_data(rspi); /* dummy read */
+ rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
+ rspi_write8(rspi, 0, QSPI_SPBFCR);
+}
+
+static bool __rspi_can_dma(const struct rspi_data *rspi,
+ const struct spi_transfer *xfer)
+{
+ return xfer->len > rspi->ops->fifo_size;
+}
+
+static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+
+ return __rspi_can_dma(rspi, xfer);
+}
+
+static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
+ struct spi_transfer *xfer)
+{
+ if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
+ return -EAGAIN;
+
+ /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
+ return rspi_dma_transfer(rspi, &xfer->tx_sg,
+ xfer->rx_buf ? &xfer->rx_sg : NULL);
+}
+
+static int rspi_common_transfer(struct rspi_data *rspi,
+ struct spi_transfer *xfer)
+{
+ int ret;
+
+ ret = rspi_dma_check_then_transfer(rspi, xfer);
+ if (ret != -EAGAIN)
+ return ret;
+
+ ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for the last transmission */
+ rspi_wait_for_tx_empty(rspi);
+
+ return 0;
+}
+
+static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+ u8 spcr;
+
+ spcr = rspi_read8(rspi, RSPI_SPCR);
+ if (xfer->rx_buf) {
+ rspi_receive_init(rspi);
+ spcr &= ~SPCR_TXMD;
+ } else {
+ spcr |= SPCR_TXMD;
+ }
+ rspi_write8(rspi, spcr, RSPI_SPCR);
+
+ return rspi_common_transfer(rspi, xfer);
+}
+
+static int rspi_rz_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+
+ rspi_rz_receive_init(rspi);
+
+ return rspi_common_transfer(rspi, xfer);
+}
+
+static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
+ u8 *rx, unsigned int len)
+{
+ unsigned int i, n;
+ int ret;
+
+ while (len > 0) {
+ n = qspi_set_send_trigger(rspi, len);
+ qspi_set_receive_trigger(rspi, len);
+ if (n == QSPI_BUFFER_SIZE) {
+ ret = rspi_wait_for_tx_empty(rspi);
+ if (ret < 0) {
+ dev_err(&rspi->master->dev, "transmit timeout\n");
+ return ret;
+ }
+ for (i = 0; i < n; i++)
+ rspi_write_data(rspi, *tx++);
+
+ ret = rspi_wait_for_rx_full(rspi);
+ if (ret < 0) {
+ dev_err(&rspi->master->dev, "receive timeout\n");
+ return ret;
+ }
+ for (i = 0; i < n; i++)
+ *rx++ = rspi_read_data(rspi);
+ } else {
+ ret = rspi_pio_transfer(rspi, tx, rx, n);
+ if (ret < 0)
+ return ret;
+ }
+ len -= n;
+ }
+
+ return 0;
+}
+
+static int qspi_transfer_out_in(struct rspi_data *rspi,
+ struct spi_transfer *xfer)
+{
+ int ret;
+
+ qspi_receive_init(rspi);
+
+ ret = rspi_dma_check_then_transfer(rspi, xfer);
+ if (ret != -EAGAIN)
+ return ret;
+
+ return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
+ xfer->rx_buf, xfer->len);
+}
+
+static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
+{
+ const u8 *tx = xfer->tx_buf;
+ unsigned int n = xfer->len;
+ unsigned int i, len;
+ int ret;
+
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
+ ret = rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
+ if (ret != -EAGAIN)
+ return ret;
+ }
+
+ while (n > 0) {
+ len = qspi_set_send_trigger(rspi, n);
+ if (len == QSPI_BUFFER_SIZE) {
+ ret = rspi_wait_for_tx_empty(rspi);
+ if (ret < 0) {
+ dev_err(&rspi->master->dev, "transmit timeout\n");
+ return ret;
+ }
+ for (i = 0; i < len; i++)
+ rspi_write_data(rspi, *tx++);
+ } else {
+ ret = rspi_pio_transfer(rspi, tx, NULL, len);
+ if (ret < 0)
+ return ret;
+ }
+ n -= len;
+ }
+
+ /* Wait for the last transmission */
+ rspi_wait_for_tx_empty(rspi);
+
+ return 0;
+}
+
+static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
+{
+ u8 *rx = xfer->rx_buf;
+ unsigned int n = xfer->len;
+ unsigned int i, len;
+ int ret;
+
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
+ int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
+ if (ret != -EAGAIN)
+ return ret;
+ }
+
+ while (n > 0) {
+ len = qspi_set_receive_trigger(rspi, n);
+ if (len == QSPI_BUFFER_SIZE) {
+ ret = rspi_wait_for_rx_full(rspi);
+ if (ret < 0) {
+ dev_err(&rspi->master->dev, "receive timeout\n");
+ return ret;
+ }
+ for (i = 0; i < len; i++)
+ *rx++ = rspi_read_data(rspi);
+ } else {
+ ret = rspi_pio_transfer(rspi, NULL, rx, len);
+ if (ret < 0)
+ return ret;
+ }
+ n -= len;
+ }
+
+ return 0;
+}
+
+static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+
+ if (spi->mode & SPI_LOOP) {
+ return qspi_transfer_out_in(rspi, xfer);
+ } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
+ /* Quad or Dual SPI Write */
+ return qspi_transfer_out(rspi, xfer);
+ } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
+ /* Quad or Dual SPI Read */
+ return qspi_transfer_in(rspi, xfer);
+ } else {
+ /* Single SPI Transfer */
+ return qspi_transfer_out_in(rspi, xfer);
+ }
+}
+
+static int rspi_setup(struct spi_device *spi)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(spi->master);
+
+ rspi->max_speed_hz = spi->max_speed_hz;
+
+ rspi->spcmd = SPCMD_SSLKP;
+ if (spi->mode & SPI_CPOL)
+ rspi->spcmd |= SPCMD_CPOL;
+ if (spi->mode & SPI_CPHA)
+ rspi->spcmd |= SPCMD_CPHA;
+
+ /* CMOS output mode and MOSI signal from previous transfer */
+ rspi->sppcr = 0;
+ if (spi->mode & SPI_LOOP)
+ rspi->sppcr |= SPPCR_SPLP;
+
+ set_config_register(rspi, 8);
+
+ return 0;
+}
+
+static u16 qspi_transfer_mode(const struct spi_transfer *xfer)
+{
+ if (xfer->tx_buf)
+ switch (xfer->tx_nbits) {
+ case SPI_NBITS_QUAD:
+ return SPCMD_SPIMOD_QUAD;
+ case SPI_NBITS_DUAL:
+ return SPCMD_SPIMOD_DUAL;
+ default:
+ return 0;
+ }
+ if (xfer->rx_buf)
+ switch (xfer->rx_nbits) {
+ case SPI_NBITS_QUAD:
+ return SPCMD_SPIMOD_QUAD | SPCMD_SPRW;
+ case SPI_NBITS_DUAL:
+ return SPCMD_SPIMOD_DUAL | SPCMD_SPRW;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+static int qspi_setup_sequencer(struct rspi_data *rspi,
+ const struct spi_message *msg)
+{
+ const struct spi_transfer *xfer;
+ unsigned int i = 0, len = 0;
+ u16 current_mode = 0xffff, mode;
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ mode = qspi_transfer_mode(xfer);
+ if (mode == current_mode) {
+ len += xfer->len;
+ continue;
+ }
+
+ /* Transfer mode change */
+ if (i) {
+ /* Set transfer data length of previous transfer */
+ rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
+ }
+
+ if (i >= QSPI_NUM_SPCMD) {
+ dev_err(&msg->spi->dev,
+ "Too many different transfer modes");
+ return -EINVAL;
+ }
+
+ /* Program transfer mode for this transfer */
+ rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i));
+ current_mode = mode;
+ len = xfer->len;
+ i++;
+ }
+ if (i) {
+ /* Set final transfer data length and sequence length */
+ rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
+ rspi_write8(rspi, i - 1, RSPI_SPSCR);
+ }
+
+ return 0;
+}
+
+static int rspi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+ int ret;
+
+ if (msg->spi->mode &
+ (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
+ /* Setup sequencer for messages with multiple transfer modes */
+ ret = qspi_setup_sequencer(rspi, msg);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Enable SPI function in master mode */
+ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
+ return 0;
+}
+
+static int rspi_unprepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
+
+ /* Disable SPI function */
+ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
+
+ /* Reset sequencer for Single SPI Transfers */
+ rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
+ rspi_write8(rspi, 0, RSPI_SPSCR);
+ return 0;
+}
+
+static irqreturn_t rspi_irq_mux(int irq, void *_sr)
+{
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
+ irqreturn_t ret = IRQ_NONE;
+ u8 disable_irq = 0;
+
+ rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPRF)
+ disable_irq |= SPCR_SPRIE;
+ if (spsr & SPSR_SPTEF)
+ disable_irq |= SPCR_SPTIE;
+
+ if (disable_irq) {
+ ret = IRQ_HANDLED;
+ rspi_disable_irq(rspi, disable_irq);
+ wake_up(&rspi->wait);
+ }
+
+ return ret;
+}
+
+static irqreturn_t rspi_irq_rx(int irq, void *_sr)
+{
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
+
+ rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPRF) {
+ rspi_disable_irq(rspi, SPCR_SPRIE);
+ wake_up(&rspi->wait);
+ return IRQ_HANDLED;
+ }
+
+ return 0;
+}
+
+static irqreturn_t rspi_irq_tx(int irq, void *_sr)
+{
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
+
+ rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPTEF) {
+ rspi_disable_irq(rspi, SPCR_SPTIE);
+ wake_up(&rspi->wait);
+ return IRQ_HANDLED;
+ }
+
+ return 0;
+}
+
+static struct dma_chan *rspi_request_dma_chan(struct device *dev,
+ enum dma_transfer_direction dir,
+ unsigned int id,
+ dma_addr_t port_addr)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ int ret;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
+ (void *)(unsigned long)id, dev,
+ dir == DMA_MEM_TO_DEV ? "tx" : "rx");
+ if (!chan) {
+ dev_warn(dev, "dma_request_slave_channel_compat failed\n");
+ return NULL;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = port_addr;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ } else {
+ cfg.src_addr = port_addr;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(dev, "dmaengine_slave_config failed %d\n", ret);
+ dma_release_channel(chan);
+ return NULL;
+ }
+
+ return chan;
+}
+
+static int rspi_request_dma(struct device *dev, struct spi_master *master,
+ const struct resource *res)
+{
+ const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
+ unsigned int dma_tx_id, dma_rx_id;
+
+ if (dev->of_node) {
+ /* In the OF case we will get the slave IDs from the DT */
+ dma_tx_id = 0;
+ dma_rx_id = 0;
+ } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
+ dma_tx_id = rspi_pd->dma_tx_id;
+ dma_rx_id = rspi_pd->dma_rx_id;
+ } else {
+ /* The driver assumes no error. */
+ return 0;
+ }
+
+ master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
+ res->start + RSPI_SPDR);
+ if (!master->dma_tx)
+ return -ENODEV;
+
+ master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
+ res->start + RSPI_SPDR);
+ if (!master->dma_rx) {
+ dma_release_channel(master->dma_tx);
+ master->dma_tx = NULL;
+ return -ENODEV;
+ }
+
+ master->can_dma = rspi_can_dma;
+ dev_info(dev, "DMA available");
+ return 0;
+}
+
+static void rspi_release_dma(struct spi_master *master)
+{
+ if (master->dma_tx)
+ dma_release_channel(master->dma_tx);
+ if (master->dma_rx)
+ dma_release_channel(master->dma_rx);
+}
+
+static int rspi_remove(struct platform_device *pdev)
+{
+ struct rspi_data *rspi = platform_get_drvdata(pdev);
+
+ rspi_release_dma(rspi->master);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct spi_ops rspi_ops = {
+ .set_config_register = rspi_set_config_register,
+ .transfer_one = rspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_TX,
+ .fifo_size = 8,
+};
+
+static const struct spi_ops rspi_rz_ops = {
+ .set_config_register = rspi_rz_set_config_register,
+ .transfer_one = rspi_rz_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
+ .fifo_size = 8, /* 8 for TX, 32 for RX */
+};
+
+static const struct spi_ops qspi_ops = {
+ .set_config_register = qspi_set_config_register,
+ .transfer_one = qspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
+ SPI_TX_DUAL | SPI_TX_QUAD |
+ SPI_RX_DUAL | SPI_RX_QUAD,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
+ .fifo_size = 32,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id rspi_of_match[] = {
+ /* RSPI on legacy SH */
+ { .compatible = "renesas,rspi", .data = &rspi_ops },
+ /* RSPI on RZ/A1H */
+ { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops },
+ /* QSPI on R-Car Gen2 */
+ { .compatible = "renesas,qspi", .data = &qspi_ops },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rspi_of_match);
+
+static int rspi_parse_dt(struct device *dev, struct spi_master *master)
+{
+ u32 num_cs;
+ int error;
+
+ /* Parse DT properties */
+ error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+ if (error) {
+ dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error);
+ return error;
+ }
+
+ master->num_chipselect = num_cs;
+ return 0;
+}
+#else
+#define rspi_of_match NULL
+static inline int rspi_parse_dt(struct device *dev, struct spi_master *master)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_OF */
+
+static int rspi_request_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, const char *suffix,
+ void *dev_id)
+{
+ const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
+ dev_name(dev), suffix);
+ if (!name)
+ return -ENOMEM;
+
+ return devm_request_irq(dev, irq, handler, 0, name, dev_id);
+}
+
+static int rspi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct spi_master *master;
+ struct rspi_data *rspi;
+ int ret;
+ const struct rspi_plat_data *rspi_pd;
+ const struct spi_ops *ops;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
+ if (master == NULL)
+ return -ENOMEM;
+
+ ops = of_device_get_match_data(&pdev->dev);
+ if (ops) {
+ ret = rspi_parse_dt(&pdev->dev, master);
+ if (ret)
+ goto error1;
+ } else {
+ ops = (struct spi_ops *)pdev->id_entry->driver_data;
+ rspi_pd = dev_get_platdata(&pdev->dev);
+ if (rspi_pd && rspi_pd->num_chipselect)
+ master->num_chipselect = rspi_pd->num_chipselect;
+ else
+ master->num_chipselect = 2; /* default */
+ }
+
+ /* ops parameter check */
+ if (!ops->set_config_register) {
+ dev_err(&pdev->dev, "there is no set_config_register\n");
+ ret = -ENODEV;
+ goto error1;
+ }
+
+ rspi = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, rspi);
+ rspi->ops = ops;
+ rspi->master = master;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rspi->addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rspi->addr)) {
+ ret = PTR_ERR(rspi->addr);
+ goto error1;
+ }
+
+ rspi->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(rspi->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(rspi->clk);
+ goto error1;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ init_waitqueue_head(&rspi->wait);
+
+ master->bus_num = pdev->id;
+ master->setup = rspi_setup;
+ master->auto_runtime_pm = true;
+ master->transfer_one = ops->transfer_one;
+ master->prepare_message = rspi_prepare_message;
+ master->unprepare_message = rspi_unprepare_message;
+ master->mode_bits = ops->mode_bits;
+ master->flags = ops->flags;
+ master->dev.of_node = pdev->dev.of_node;
+
+ ret = platform_get_irq_byname(pdev, "rx");
+ if (ret < 0) {
+ ret = platform_get_irq_byname(pdev, "mux");
+ if (ret < 0)
+ ret = platform_get_irq(pdev, 0);
+ if (ret >= 0)
+ rspi->rx_irq = rspi->tx_irq = ret;
+ } else {
+ rspi->rx_irq = ret;
+ ret = platform_get_irq_byname(pdev, "tx");
+ if (ret >= 0)
+ rspi->tx_irq = ret;
+ }
+ if (ret < 0) {
+ dev_err(&pdev->dev, "platform_get_irq error\n");
+ goto error2;
+ }
+
+ if (rspi->rx_irq == rspi->tx_irq) {
+ /* Single multiplexed interrupt */
+ ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux,
+ "mux", rspi);
+ } else {
+ /* Multi-interrupt mode, only SPRI and SPTI are used */
+ ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx,
+ "rx", rspi);
+ if (!ret)
+ ret = rspi_request_irq(&pdev->dev, rspi->tx_irq,
+ rspi_irq_tx, "tx", rspi);
+ }
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request_irq error\n");
+ goto error2;
+ }
+
+ ret = rspi_request_dma(&pdev->dev, master, res);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "DMA not available, using PIO\n");
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "spi_register_master error.\n");
+ goto error3;
+ }
+
+ dev_info(&pdev->dev, "probed\n");
+
+ return 0;
+
+error3:
+ rspi_release_dma(master);
+error2:
+ pm_runtime_disable(&pdev->dev);
+error1:
+ spi_master_put(master);
+
+ return ret;
+}
+
+static const struct platform_device_id spi_driver_ids[] = {
+ { "rspi", (kernel_ulong_t)&rspi_ops },
+ { "rspi-rz", (kernel_ulong_t)&rspi_rz_ops },
+ { "qspi", (kernel_ulong_t)&qspi_ops },
+ {},
+};
+
+MODULE_DEVICE_TABLE(platform, spi_driver_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int rspi_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rspi_data *rspi = platform_get_drvdata(pdev);
+
+ return spi_master_suspend(rspi->master);
+}
+
+static int rspi_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rspi_data *rspi = platform_get_drvdata(pdev);
+
+ return spi_master_resume(rspi->master);
+}
+
+static SIMPLE_DEV_PM_OPS(rspi_pm_ops, rspi_suspend, rspi_resume);
+#define DEV_PM_OPS &rspi_pm_ops
+#else
+#define DEV_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct platform_driver rspi_driver = {
+ .probe = rspi_probe,
+ .remove = rspi_remove,
+ .id_table = spi_driver_ids,
+ .driver = {
+ .name = "renesas_spi",
+ .pm = DEV_PM_OPS,
+ .of_match_table = of_match_ptr(rspi_of_match),
+ },
+};
+module_platform_driver(rspi_driver);
+
+MODULE_DESCRIPTION("Renesas RSPI bus driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:rspi");