v4.19.13 snapshot.
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
new file mode 100644
index 0000000..d0dab32
--- /dev/null
+++ b/drivers/soc/ti/pm33xx.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Power Management Routines
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Vaibhav Bedia, Dave Gerlach
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/genalloc.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/pm33xx.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/sram.h>
+#include <linux/suspend.h>
+#include <linux/ti-emif-sram.h>
+#include <linux/wkup_m3_ipc.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/system_misc.h>
+
+#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
+					 (unsigned long)pm_sram->do_wfi)
+
+static int (*am33xx_do_wfi_sram)(unsigned long unused);
+static phys_addr_t am33xx_do_wfi_sram_phys;
+
+static struct gen_pool *sram_pool, *sram_pool_data;
+static unsigned long ocmcram_location, ocmcram_location_data;
+
+static struct am33xx_pm_platform_data *pm_ops;
+static struct am33xx_pm_sram_addr *pm_sram;
+
+static struct device *pm33xx_dev;
+static struct wkup_m3_ipc *m3_ipc;
+
+static unsigned long suspend_wfi_flags;
+
+static u32 sram_suspend_address(unsigned long addr)
+{
+	return ((unsigned long)am33xx_do_wfi_sram +
+		AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
+}
+
+#ifdef CONFIG_SUSPEND
+static int am33xx_pm_suspend(suspend_state_t suspend_state)
+{
+	int i, ret = 0;
+
+	ret = pm_ops->soc_suspend((unsigned long)suspend_state,
+				  am33xx_do_wfi_sram, suspend_wfi_flags);
+
+	if (ret) {
+		dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
+	} else {
+		i = m3_ipc->ops->request_pm_status(m3_ipc);
+
+		switch (i) {
+		case 0:
+			dev_info(pm33xx_dev,
+				 "PM: Successfully put all powerdomains to target state\n");
+			break;
+		case 1:
+			dev_err(pm33xx_dev,
+				"PM: Could not transition all powerdomains to target state\n");
+			ret = -1;
+			break;
+		default:
+			dev_err(pm33xx_dev,
+				"PM: CM3 returned unknown result = %d\n", i);
+			ret = -1;
+		}
+	}
+
+	return ret;
+}
+
+static int am33xx_pm_enter(suspend_state_t suspend_state)
+{
+	int ret = 0;
+
+	switch (suspend_state) {
+	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
+		ret = am33xx_pm_suspend(suspend_state);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int am33xx_pm_begin(suspend_state_t state)
+{
+	int ret = -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
+		break;
+	case PM_SUSPEND_STANDBY:
+		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
+		break;
+	}
+
+	return ret;
+}
+
+static void am33xx_pm_end(void)
+{
+	m3_ipc->ops->finish_low_power(m3_ipc);
+}
+
+static int am33xx_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops am33xx_pm_ops = {
+	.begin		= am33xx_pm_begin,
+	.end		= am33xx_pm_end,
+	.enter		= am33xx_pm_enter,
+	.valid		= am33xx_pm_valid,
+};
+#endif /* CONFIG_SUSPEND */
+
+static void am33xx_pm_set_ipc_ops(void)
+{
+	u32 resume_address;
+	int temp;
+
+	temp = ti_emif_get_mem_type();
+	if (temp < 0) {
+		dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
+		return;
+	}
+	m3_ipc->ops->set_mem_type(m3_ipc, temp);
+
+	/* Physical resume address to be used by ROM code */
+	resume_address = am33xx_do_wfi_sram_phys +
+			 *pm_sram->resume_offset + 0x4;
+
+	m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
+}
+
+static void am33xx_pm_free_sram(void)
+{
+	gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+	gen_pool_free(sram_pool_data, ocmcram_location_data,
+		      sizeof(struct am33xx_pm_ro_sram_data));
+}
+
+/*
+ * Push the minimal suspend-resume code to SRAM
+ */
+static int am33xx_pm_alloc_sram(void)
+{
+	struct device_node *np;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
+	if (!np) {
+		np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+		if (!np) {
+			dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
+				__func__);
+			return -ENODEV;
+		}
+	}
+
+	sram_pool = of_gen_pool_get(np, "pm-sram", 0);
+	if (!sram_pool) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
+			__func__);
+		ret = -ENODEV;
+		goto mpu_put_node;
+	}
+
+	sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
+	if (!sram_pool_data) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
+			__func__);
+		ret = -ENODEV;
+		goto mpu_put_node;
+	}
+
+	ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
+	if (!ocmcram_location) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
+			__func__);
+		ret = -ENOMEM;
+		goto mpu_put_node;
+	}
+
+	ocmcram_location_data = gen_pool_alloc(sram_pool_data,
+					       sizeof(struct emif_regs_amx3));
+	if (!ocmcram_location_data) {
+		dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
+		gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+		ret = -ENOMEM;
+	}
+
+mpu_put_node:
+	of_node_put(np);
+	return ret;
+}
+
+static int am33xx_push_sram_idle(void)
+{
+	struct am33xx_pm_ro_sram_data ro_sram_data;
+	int ret;
+	u32 table_addr, ro_data_addr;
+	void *copy_addr;
+
+	ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
+	ro_sram_data.amx3_pm_sram_data_phys =
+		gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
+	ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr();
+
+	/* Save physical address to calculate resume offset during pm init */
+	am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
+							ocmcram_location);
+
+	am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
+					    pm_sram->do_wfi,
+					    *pm_sram->do_wfi_sz);
+	if (!am33xx_do_wfi_sram) {
+		dev_err(pm33xx_dev,
+			"PM: %s: am33xx_do_wfi copy to sram failed\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	table_addr =
+		sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
+	ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
+	if (ret) {
+		dev_dbg(pm33xx_dev,
+			"PM: %s: EMIF function copy failed\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	ro_data_addr =
+		sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
+	copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
+				   &ro_sram_data,
+				   sizeof(ro_sram_data));
+	if (!copy_addr) {
+		dev_err(pm33xx_dev,
+			"PM: %s: ro_sram_data copy to sram failed\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int am33xx_pm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	if (!of_machine_is_compatible("ti,am33xx") &&
+	    !of_machine_is_compatible("ti,am43"))
+		return -ENODEV;
+
+	pm_ops = dev->platform_data;
+	if (!pm_ops) {
+		dev_err(dev, "PM: Cannot get core PM ops!\n");
+		return -ENODEV;
+	}
+
+	pm_sram = pm_ops->get_sram_addrs();
+	if (!pm_sram) {
+		dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
+		return -ENODEV;
+	}
+
+	pm33xx_dev = dev;
+
+	ret = am33xx_pm_alloc_sram();
+	if (ret)
+		return ret;
+
+	ret = am33xx_push_sram_idle();
+	if (ret)
+		goto err_free_sram;
+
+	m3_ipc = wkup_m3_ipc_get();
+	if (!m3_ipc) {
+		dev_dbg(dev, "PM: Cannot get wkup_m3_ipc handle\n");
+		ret = -EPROBE_DEFER;
+		goto err_free_sram;
+	}
+
+	am33xx_pm_set_ipc_ops();
+
+#ifdef CONFIG_SUSPEND
+	suspend_set_ops(&am33xx_pm_ops);
+#endif /* CONFIG_SUSPEND */
+
+	/*
+	 * For a system suspend we must flush the caches, we want
+	 * the DDR in self-refresh, we want to save the context
+	 * of the EMIF, and we want the wkup_m3 to handle low-power
+	 * transition.
+	 */
+	suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
+	suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
+	suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
+	suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
+
+	ret = pm_ops->init();
+	if (ret) {
+		dev_err(dev, "Unable to call core pm init!\n");
+		ret = -ENODEV;
+		goto err_put_wkup_m3_ipc;
+	}
+
+	return 0;
+
+err_put_wkup_m3_ipc:
+	wkup_m3_ipc_put(m3_ipc);
+err_free_sram:
+	am33xx_pm_free_sram();
+	pm33xx_dev = NULL;
+	return ret;
+}
+
+static int am33xx_pm_remove(struct platform_device *pdev)
+{
+	suspend_set_ops(NULL);
+	wkup_m3_ipc_put(m3_ipc);
+	am33xx_pm_free_sram();
+	return 0;
+}
+
+static struct platform_driver am33xx_pm_driver = {
+	.driver = {
+		.name   = "pm33xx",
+	},
+	.probe = am33xx_pm_probe,
+	.remove = am33xx_pm_remove,
+};
+module_platform_driver(am33xx_pm_driver);
+
+MODULE_ALIAS("platform:pm33xx");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("am33xx power management driver");