v4.19.13 snapshot.
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644
index 0000000..199527d
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -0,0 +1,135 @@
+/*
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+ chip_8001,
+ chip_8008,
+ chip_8009,
+ chip_8018,
+ chip_8019,
+ chip_8074,
+ chip_8076,
+ chip_8077,
+ chip_8006,
+ chip_8070,
+ chip_8072
+};
+
+enum phy_speed {
+ PHY_SPEED_15 = 0x01,
+ PHY_SPEED_30 = 0x02,
+ PHY_SPEED_60 = 0x04,
+ PHY_SPEED_120 = 0x08,
+};
+
+enum data_direction {
+ DATA_DIR_NONE = 0x0, /* NO TRANSFER */
+ DATA_DIR_IN = 0x01, /* INBOUND */
+ DATA_DIR_OUT = 0x02, /* OUTBOUND */
+ DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+ PORT_TYPE_SAS = (1L << 1),
+ PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define PM8001_MAX_CCB 512 /* max ccbs supported */
+#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
+#define PM8001_MAX_INB_NUM 1
+#define PM8001_MAX_OUTB_NUM 1
+#define PM8001_MAX_SPCV_INB_NUM 1
+#define PM8001_MAX_SPCV_OUTB_NUM 4
+#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
+
+/* Inbound/Outbound queue size */
+#define IOMB_SIZE_SPC 64
+#define IOMB_SIZE_SPCV 128
+
+/* unchangeable hardware details */
+#define PM8001_MAX_PHYS 16 /* max. possible phys */
+#define PM8001_MAX_PORTS 16 /* max. possible ports */
+#define PM8001_MAX_DEVICES 2048 /* max supported device */
+#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
+
+#define USI_MAX_MEMCNT_BASE 5
+#define IB (USI_MAX_MEMCNT_BASE + 1)
+#define CI (IB + PM8001_MAX_SPCV_INB_NUM)
+#define OB (CI + PM8001_MAX_SPCV_INB_NUM)
+#define PI (OB + PM8001_MAX_SPCV_OUTB_NUM)
+#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)
+#define PM8001_MAX_DMA_SG SG_ALL
+enum memory_region_num {
+ AAP1 = 0x0, /* application acceleration processor */
+ IOP, /* IO processor */
+ NVMD, /* NVM device */
+ DEV_MEM, /* memory for devices */
+ CCB_MEM, /* memory for command control block */
+ FW_FLASH, /* memory for fw flash update */
+ FORENSIC_MEM /* memory for fw forensic data */
+};
+#define PM8001_EVENT_LOG_SIZE (128 * 1024)
+
+/*error code*/
+enum mpi_err {
+ MPI_IO_STATUS_SUCCESS = 0x0,
+ MPI_IO_STATUS_BUSY = 0x01,
+ MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+ PHY_LINK_RESET = 0x01,
+ PHY_HARD_RESET = 0x02,
+ PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+ PM8001F_INIT_TIME = (1U << 0),
+ PM8001F_RUN_TIME = (1U << 1),
+};
+
+#endif