v4.19.13 snapshot.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
new file mode 100644
index 0000000..59d7844
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -0,0 +1,6965 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012-2014 LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/time.h>
+#include <linux/ktime.h>
+#include <linux/kthread.h>
+#include <asm/page.h> /* To get host page size per arch */
+#include <linux/aer.h>
+
+
+#include "mpt3sas_base.h"
+
+static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
+
+
+#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
+
+ /* maximum controller queue depth */
+#define MAX_HBA_QUEUE_DEPTH 30000
+#define MAX_CHAIN_DEPTH 100000
+static int max_queue_depth = -1;
+module_param(max_queue_depth, int, 0);
+MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
+
+static int max_sgl_entries = -1;
+module_param(max_sgl_entries, int, 0);
+MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
+
+static int msix_disable = -1;
+module_param(msix_disable, int, 0);
+MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
+
+static int smp_affinity_enable = 1;
+module_param(smp_affinity_enable, int, S_IRUGO);
+MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)");
+
+static int max_msix_vectors = -1;
+module_param(max_msix_vectors, int, 0);
+MODULE_PARM_DESC(max_msix_vectors,
+ " max msix vectors");
+
+static int mpt3sas_fwfault_debug;
+MODULE_PARM_DESC(mpt3sas_fwfault_debug,
+ " enable detection of firmware fault and halt firmware - (default=0)");
+
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc);
+
+/**
+ * mpt3sas_base_check_cmd_timeout - Function
+ * to check timeout and command termination due
+ * to Host reset.
+ *
+ * @ioc: per adapter object.
+ * @status: Status of issued command.
+ * @mpi_request:mf request pointer.
+ * @sz: size of buffer.
+ *
+ * @Returns - 1/0 Reset to be done or Not
+ */
+u8
+mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
+ u8 status, void *mpi_request, int sz)
+{
+ u8 issue_reset = 0;
+
+ if (!(status & MPT3_CMD_RESET))
+ issue_reset = 1;
+
+ pr_err(MPT3SAS_FMT "Command %s\n", ioc->name,
+ ((issue_reset == 0) ? "terminated due to Host Reset" : "Timeout"));
+ _debug_dump_mf(mpi_request, sz);
+
+ return issue_reset;
+}
+
+/**
+ * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
+ * @val: ?
+ * @kp: ?
+ *
+ * Return: ?
+ */
+static int
+_scsih_set_fwfault_debug(const char *val, const struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ struct MPT3SAS_ADAPTER *ioc;
+
+ if (ret)
+ return ret;
+
+ /* global ioc spinlock to protect controller list on list operations */
+ pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+ spin_lock(&gioc_lock);
+ list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+ ioc->fwfault_debug = mpt3sas_fwfault_debug;
+ spin_unlock(&gioc_lock);
+ return 0;
+}
+module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
+ param_get_int, &mpt3sas_fwfault_debug, 0644);
+
+/**
+ * _base_clone_reply_to_sys_mem - copies reply to reply free iomem
+ * in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @reply: reply message frame(lower 32bit addr)
+ * @index: System request message index.
+ */
+static void
+_base_clone_reply_to_sys_mem(struct MPT3SAS_ADAPTER *ioc, u32 reply,
+ u32 index)
+{
+ /*
+ * 256 is offset within sys register.
+ * 256 offset MPI frame starts. Max MPI frame supported is 32.
+ * 32 * 128 = 4K. From here, Clone of reply free for mcpu starts
+ */
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ void __iomem *reply_free_iomem = (void __iomem *)ioc->chip +
+ MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) + (index * sizeof(u32));
+
+ writel(reply, reply_free_iomem);
+}
+
+/**
+ * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames
+ * to system/BAR0 region.
+ *
+ * @dst_iomem: Pointer to the destination location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size)
+{
+ int i;
+ u32 *src_virt_mem = (u32 *)src;
+
+ for (i = 0; i < size/4; i++)
+ writel((u32)src_virt_mem[i],
+ (void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
+ *
+ * @dst_iomem: Pointer to the destination location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_to_sys_mem(void __iomem *dst_iomem, void *src, u32 size)
+{
+ int i;
+ u32 *src_virt_mem = (u32 *)(src);
+
+ for (i = 0; i < size/4; i++)
+ writel((u32)src_virt_mem[i],
+ (void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_get_chain - Calculates and Returns virtual chain address
+ * for the provided smid in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * Return: the chain address.
+ */
+static inline void __iomem*
+_base_get_chain(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u8 sge_chain_count)
+{
+ void __iomem *base_chain, *chain_virt;
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+ base_chain = (void __iomem *)ioc->chip + MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) +
+ REPLY_FREE_POOL_SIZE;
+ chain_virt = base_chain + (smid * ioc->facts.MaxChainDepth *
+ ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+ return chain_virt;
+}
+
+/**
+ * _base_get_chain_phys - Calculates and Returns physical address
+ * in BAR0 for scatter gather chains, for
+ * the provided smid.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * Return: Physical chain address.
+ */
+static inline phys_addr_t
+_base_get_chain_phys(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u8 sge_chain_count)
+{
+ phys_addr_t base_chain_phys, chain_phys;
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+ base_chain_phys = ioc->chip_phys + MPI_FRAME_START_OFFSET +
+ (cmd_credit * ioc->request_sz) +
+ REPLY_FREE_POOL_SIZE;
+ chain_phys = base_chain_phys + (smid * ioc->facts.MaxChainDepth *
+ ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+ return chain_phys;
+}
+
+/**
+ * _base_get_buffer_bar0 - Calculates and Returns BAR0 mapped Host
+ * buffer address for the provided smid.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: Pointer to buffer location in BAR0.
+ */
+
+static void __iomem *
+_base_get_buffer_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ // Added extra 1 to reach end of chain.
+ void __iomem *chain_end = _base_get_chain(ioc,
+ cmd_credit + 1,
+ ioc->facts.MaxChainDepth);
+ return chain_end + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_buffer_phys_bar0 - Calculates and Returns BAR0 mapped
+ * Host buffer Physical address for the provided smid.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: Pointer to buffer location in BAR0.
+ */
+static phys_addr_t
+_base_get_buffer_phys_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ u16 cmd_credit = ioc->facts.RequestCredit + 1;
+ phys_addr_t chain_end_phys = _base_get_chain_phys(ioc,
+ cmd_credit + 1,
+ ioc->facts.MaxChainDepth);
+ return chain_end_phys + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_chain_buffer_dma_to_chain_buffer - Iterates chain
+ * lookup list and Provides chain_buffer
+ * address for the matching dma address.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @chain_buffer_dma: Chain buffer dma address.
+ *
+ * Return: Pointer to chain buffer. Or Null on Failure.
+ */
+static void *
+_base_get_chain_buffer_dma_to_chain_buffer(struct MPT3SAS_ADAPTER *ioc,
+ dma_addr_t chain_buffer_dma)
+{
+ u16 index, j;
+ struct chain_tracker *ct;
+
+ for (index = 0; index < ioc->scsiio_depth; index++) {
+ for (j = 0; j < ioc->chains_needed_per_io; j++) {
+ ct = &ioc->chain_lookup[index].chains_per_smid[j];
+ if (ct && ct->chain_buffer_dma == chain_buffer_dma)
+ return ct->chain_buffer;
+ }
+ }
+ pr_info(MPT3SAS_FMT
+ "Provided chain_buffer_dma address is not in the lookup list\n",
+ ioc->name);
+ return NULL;
+}
+
+/**
+ * _clone_sg_entries - MPI EP's scsiio and config requests
+ * are handled here. Base function for
+ * double buffering, before submitting
+ * the requests.
+ *
+ * @ioc: per adapter object.
+ * @mpi_request: mf request pointer.
+ * @smid: system request message index.
+ */
+static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
+ void *mpi_request, u16 smid)
+{
+ Mpi2SGESimple32_t *sgel, *sgel_next;
+ u32 sgl_flags, sge_chain_count = 0;
+ bool is_write = 0;
+ u16 i = 0;
+ void __iomem *buffer_iomem;
+ phys_addr_t buffer_iomem_phys;
+ void __iomem *buff_ptr;
+ phys_addr_t buff_ptr_phys;
+ void __iomem *dst_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+ void *src_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+ phys_addr_t dst_addr_phys;
+ MPI2RequestHeader_t *request_hdr;
+ struct scsi_cmnd *scmd;
+ struct scatterlist *sg_scmd = NULL;
+ int is_scsiio_req = 0;
+
+ request_hdr = (MPI2RequestHeader_t *) mpi_request;
+
+ if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
+ Mpi25SCSIIORequest_t *scsiio_request =
+ (Mpi25SCSIIORequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &scsiio_request->SGL;
+ is_scsiio_req = 1;
+ } else if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+ Mpi2ConfigRequest_t *config_req =
+ (Mpi2ConfigRequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &config_req->PageBufferSGE;
+ } else
+ return;
+
+ /* From smid we can get scsi_cmd, once we have sg_scmd,
+ * we just need to get sg_virt and sg_next to get virual
+ * address associated with sgel->Address.
+ */
+
+ if (is_scsiio_req) {
+ /* Get scsi_cmd using smid */
+ scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+ if (scmd == NULL) {
+ pr_err(MPT3SAS_FMT "scmd is NULL\n", ioc->name);
+ return;
+ }
+
+ /* Get sg_scmd from scmd provided */
+ sg_scmd = scsi_sglist(scmd);
+ }
+
+ /*
+ * 0 - 255 System register
+ * 256 - 4352 MPI Frame. (This is based on maxCredit 32)
+ * 4352 - 4864 Reply_free pool (512 byte is reserved
+ * considering maxCredit 32. Reply need extra
+ * room, for mCPU case kept four times of
+ * maxCredit).
+ * 4864 - 17152 SGE chain element. (32cmd * 3 chain of
+ * 128 byte size = 12288)
+ * 17152 - x Host buffer mapped with smid.
+ * (Each smid can have 64K Max IO.)
+ * BAR0+Last 1K MSIX Addr and Data
+ * Total size in use 2113664 bytes of 4MB BAR0
+ */
+
+ buffer_iomem = _base_get_buffer_bar0(ioc, smid);
+ buffer_iomem_phys = _base_get_buffer_phys_bar0(ioc, smid);
+
+ buff_ptr = buffer_iomem;
+ buff_ptr_phys = buffer_iomem_phys;
+ WARN_ON(buff_ptr_phys > U32_MAX);
+
+ if (le32_to_cpu(sgel->FlagsLength) &
+ (MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT))
+ is_write = 1;
+
+ for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) {
+
+ sgl_flags =
+ (le32_to_cpu(sgel->FlagsLength) >> MPI2_SGE_FLAGS_SHIFT);
+
+ switch (sgl_flags & MPI2_SGE_FLAGS_ELEMENT_MASK) {
+ case MPI2_SGE_FLAGS_CHAIN_ELEMENT:
+ /*
+ * Helper function which on passing
+ * chain_buffer_dma returns chain_buffer. Get
+ * the virtual address for sgel->Address
+ */
+ sgel_next =
+ _base_get_chain_buffer_dma_to_chain_buffer(ioc,
+ le32_to_cpu(sgel->Address));
+ if (sgel_next == NULL)
+ return;
+ /*
+ * This is coping 128 byte chain
+ * frame (not a host buffer)
+ */
+ dst_chain_addr[sge_chain_count] =
+ _base_get_chain(ioc,
+ smid, sge_chain_count);
+ src_chain_addr[sge_chain_count] =
+ (void *) sgel_next;
+ dst_addr_phys = _base_get_chain_phys(ioc,
+ smid, sge_chain_count);
+ WARN_ON(dst_addr_phys > U32_MAX);
+ sgel->Address =
+ cpu_to_le32(lower_32_bits(dst_addr_phys));
+ sgel = sgel_next;
+ sge_chain_count++;
+ break;
+ case MPI2_SGE_FLAGS_SIMPLE_ELEMENT:
+ if (is_write) {
+ if (is_scsiio_req) {
+ _base_clone_to_sys_mem(buff_ptr,
+ sg_virt(sg_scmd),
+ (le32_to_cpu(sgel->FlagsLength) &
+ 0x00ffffff));
+ /*
+ * FIXME: this relies on a a zero
+ * PCI mem_offset.
+ */
+ sgel->Address =
+ cpu_to_le32((u32)buff_ptr_phys);
+ } else {
+ _base_clone_to_sys_mem(buff_ptr,
+ ioc->config_vaddr,
+ (le32_to_cpu(sgel->FlagsLength) &
+ 0x00ffffff));
+ sgel->Address =
+ cpu_to_le32((u32)buff_ptr_phys);
+ }
+ }
+ buff_ptr += (le32_to_cpu(sgel->FlagsLength) &
+ 0x00ffffff);
+ buff_ptr_phys += (le32_to_cpu(sgel->FlagsLength) &
+ 0x00ffffff);
+ if ((le32_to_cpu(sgel->FlagsLength) &
+ (MPI2_SGE_FLAGS_END_OF_BUFFER
+ << MPI2_SGE_FLAGS_SHIFT)))
+ goto eob_clone_chain;
+ else {
+ /*
+ * Every single element in MPT will have
+ * associated sg_next. Better to sanity that
+ * sg_next is not NULL, but it will be a bug
+ * if it is null.
+ */
+ if (is_scsiio_req) {
+ sg_scmd = sg_next(sg_scmd);
+ if (sg_scmd)
+ sgel++;
+ else
+ goto eob_clone_chain;
+ }
+ }
+ break;
+ }
+ }
+
+eob_clone_chain:
+ for (i = 0; i < sge_chain_count; i++) {
+ if (is_scsiio_req)
+ _base_clone_to_sys_mem(dst_chain_addr[i],
+ src_chain_addr[i], ioc->request_sz);
+ }
+}
+
+/**
+ * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return:
+ * 0 if controller is removed from pci subsystem.
+ * -1 for other case.
+ */
+static int mpt3sas_remove_dead_ioc_func(void *arg)
+{
+ struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pdev;
+ if ((pdev == NULL))
+ return -1;
+ pci_stop_and_remove_bus_device_locked(pdev);
+ return 0;
+}
+
+/**
+ * _base_fault_reset_work - workq handling ioc fault conditions
+ * @work: input argument, used to derive ioc
+ *
+ * Context: sleep.
+ */
+static void
+_base_fault_reset_work(struct work_struct *work)
+{
+ struct MPT3SAS_ADAPTER *ioc =
+ container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
+ unsigned long flags;
+ u32 doorbell;
+ int rc;
+ struct task_struct *p;
+
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->shost_recovery || ioc->pci_error_recovery)
+ goto rearm_timer;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
+ pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
+ ioc->name);
+
+ /* It may be possible that EEH recovery can resolve some of
+ * pci bus failure issues rather removing the dead ioc function
+ * by considering controller is in a non-operational state. So
+ * here priority is given to the EEH recovery. If it doesn't
+ * not resolve this issue, mpt3sas driver will consider this
+ * controller to non-operational state and remove the dead ioc
+ * function.
+ */
+ if (ioc->non_operational_loop++ < 5) {
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ goto rearm_timer;
+ }
+
+ /*
+ * Call _scsih_flush_pending_cmds callback so that we flush all
+ * pending commands back to OS. This call is required to aovid
+ * deadlock at block layer. Dead IOC will fail to do diag reset,
+ * and this call is safe since dead ioc will never return any
+ * command back from HW.
+ */
+ ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+ /*
+ * Set remove_host flag early since kernel thread will
+ * take some time to execute.
+ */
+ ioc->remove_host = 1;
+ /*Remove the Dead Host */
+ p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
+ "%s_dead_ioc_%d", ioc->driver_name, ioc->id);
+ if (IS_ERR(p))
+ pr_err(MPT3SAS_FMT
+ "%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
+ ioc->name, __func__);
+ else
+ pr_err(MPT3SAS_FMT
+ "%s: Running mpt3sas_dead_ioc thread success !!!!\n",
+ ioc->name, __func__);
+ return; /* don't rearm timer */
+ }
+
+ ioc->non_operational_loop = 0;
+
+ if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
+ rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
+ __func__, (rc == 0) ? "success" : "failed");
+ doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ mpt3sas_base_fault_info(ioc, doorbell &
+ MPI2_DOORBELL_DATA_MASK);
+ if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
+ MPI2_IOC_STATE_OPERATIONAL)
+ return; /* don't rearm timer */
+ }
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ rearm_timer:
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: per adapter object
+ *
+ * Context: sleep.
+ */
+void
+mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ if (ioc->fault_reset_work_q)
+ return;
+
+ /* initialize fault polling */
+
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+ snprintf(ioc->fault_reset_work_q_name,
+ sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status",
+ ioc->driver_name, ioc->id);
+ ioc->fault_reset_work_q =
+ create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+ if (!ioc->fault_reset_work_q) {
+ pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: per adapter object
+ *
+ * Context: sleep.
+ */
+void
+mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ wq = ioc->fault_reset_work_q;
+ ioc->fault_reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
+/**
+ * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ */
+void
+mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code)
+{
+ pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n",
+ ioc->name, fault_code);
+}
+
+/**
+ * mpt3sas_halt_firmware - halt's mpt controller firmware
+ * @ioc: per adapter object
+ *
+ * For debugging timeout related issues. Writing 0xCOFFEE00
+ * to the doorbell register will halt controller firmware. With
+ * the purpose to stop both driver and firmware, the enduser can
+ * obtain a ring buffer from controller UART.
+ */
+void
+mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 doorbell;
+
+ if (!ioc->fwfault_debug)
+ return;
+
+ dump_stack();
+
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ mpt3sas_base_fault_info(ioc , doorbell);
+ else {
+ writel(0xC0FFEE00, &ioc->chip->Doorbell);
+ pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n",
+ ioc->name);
+ }
+
+ if (ioc->fwfault_debug == 2)
+ for (;;)
+ ;
+ else
+ panic("panic in %s\n", __func__);
+}
+
+/**
+ * _base_sas_ioc_info - verbose translation of the ioc status
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @request_hdr: request mf
+ */
+static void
+_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
+ MPI2RequestHeader_t *request_hdr)
+{
+ u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ char *desc = NULL;
+ u16 frame_sz;
+ char *func_str = NULL;
+
+ /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
+ if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+ request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+ request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
+ return;
+
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ return;
+
+ switch (ioc_status) {
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_INVALID_FUNCTION:
+ desc = "invalid function";
+ break;
+ case MPI2_IOCSTATUS_BUSY:
+ desc = "busy";
+ break;
+ case MPI2_IOCSTATUS_INVALID_SGL:
+ desc = "invalid sgl";
+ break;
+ case MPI2_IOCSTATUS_INTERNAL_ERROR:
+ desc = "internal error";
+ break;
+ case MPI2_IOCSTATUS_INVALID_VPID:
+ desc = "invalid vpid";
+ break;
+ case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ desc = "insufficient resources";
+ break;
+ case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+ desc = "insufficient power";
+ break;
+ case MPI2_IOCSTATUS_INVALID_FIELD:
+ desc = "invalid field";
+ break;
+ case MPI2_IOCSTATUS_INVALID_STATE:
+ desc = "invalid state";
+ break;
+ case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
+ desc = "op state not supported";
+ break;
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
+ desc = "config invalid action";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
+ desc = "config invalid type";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
+ desc = "config invalid page";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
+ desc = "config invalid data";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
+ desc = "config no defaults";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
+ desc = "config cant commit";
+ break;
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+ case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+ case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+ case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+ case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+ case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+ break;
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+ desc = "eedp guard error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ desc = "eedp ref tag error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ desc = "eedp app tag error";
+ break;
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
+ desc = "target invalid io index";
+ break;
+ case MPI2_IOCSTATUS_TARGET_ABORTED:
+ desc = "target aborted";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
+ desc = "target no conn retryable";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
+ desc = "target no connection";
+ break;
+ case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
+ desc = "target xfer count mismatch";
+ break;
+ case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
+ desc = "target data offset error";
+ break;
+ case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
+ desc = "target too much write data";
+ break;
+ case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
+ desc = "target iu too short";
+ break;
+ case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
+ desc = "target ack nak timeout";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
+ desc = "target nak received";
+ break;
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
+ desc = "smp request failed";
+ break;
+ case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
+ desc = "smp data overrun";
+ break;
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
+ desc = "diagnostic released";
+ break;
+ default:
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ switch (request_hdr->Function) {
+ case MPI2_FUNCTION_CONFIG:
+ frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
+ func_str = "config_page";
+ break;
+ case MPI2_FUNCTION_SCSI_TASK_MGMT:
+ frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
+ func_str = "task_mgmt";
+ break;
+ case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+ frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
+ func_str = "sas_iounit_ctl";
+ break;
+ case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
+ frame_sz = sizeof(Mpi2SepRequest_t);
+ func_str = "enclosure";
+ break;
+ case MPI2_FUNCTION_IOC_INIT:
+ frame_sz = sizeof(Mpi2IOCInitRequest_t);
+ func_str = "ioc_init";
+ break;
+ case MPI2_FUNCTION_PORT_ENABLE:
+ frame_sz = sizeof(Mpi2PortEnableRequest_t);
+ func_str = "port_enable";
+ break;
+ case MPI2_FUNCTION_SMP_PASSTHROUGH:
+ frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
+ func_str = "smp_passthru";
+ break;
+ case MPI2_FUNCTION_NVME_ENCAPSULATED:
+ frame_sz = sizeof(Mpi26NVMeEncapsulatedRequest_t) +
+ ioc->sge_size;
+ func_str = "nvme_encapsulated";
+ break;
+ default:
+ frame_sz = 32;
+ func_str = "unknown";
+ break;
+ }
+
+ pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
+ ioc->name, desc, ioc_status, request_hdr, func_str);
+
+ _debug_dump_mf(request_hdr, frame_sz/4);
+}
+
+/**
+ * _base_display_event_data - verbose translation of firmware asyn events
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ */
+static void
+_base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2EventNotificationReply_t *mpi_reply)
+{
+ char *desc = NULL;
+ u16 event;
+
+ if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
+ return;
+
+ event = le16_to_cpu(mpi_reply->Event);
+
+ switch (event) {
+ case MPI2_EVENT_LOG_DATA:
+ desc = "Log Data";
+ break;
+ case MPI2_EVENT_STATE_CHANGE:
+ desc = "Status Change";
+ break;
+ case MPI2_EVENT_HARD_RESET_RECEIVED:
+ desc = "Hard Reset Received";
+ break;
+ case MPI2_EVENT_EVENT_CHANGE:
+ desc = "Event Change";
+ break;
+ case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ desc = "Device Status Change";
+ break;
+ case MPI2_EVENT_IR_OPERATION_STATUS:
+ if (!ioc->hide_ir_msg)
+ desc = "IR Operation Status";
+ break;
+ case MPI2_EVENT_SAS_DISCOVERY:
+ {
+ Mpi2EventDataSasDiscovery_t *event_data =
+ (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
+ pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name,
+ (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->DiscoveryStatus)
+ pr_cont(" discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
+ pr_cont("\n");
+ return;
+ }
+ case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+ desc = "SAS Broadcast Primitive";
+ break;
+ case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ desc = "SAS Init Device Status Change";
+ break;
+ case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ desc = "SAS Init Table Overflow";
+ break;
+ case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ desc = "SAS Topology Change List";
+ break;
+ case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+ desc = "SAS Enclosure Device Status Change";
+ break;
+ case MPI2_EVENT_IR_VOLUME:
+ if (!ioc->hide_ir_msg)
+ desc = "IR Volume";
+ break;
+ case MPI2_EVENT_IR_PHYSICAL_DISK:
+ if (!ioc->hide_ir_msg)
+ desc = "IR Physical Disk";
+ break;
+ case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+ if (!ioc->hide_ir_msg)
+ desc = "IR Configuration Change List";
+ break;
+ case MPI2_EVENT_LOG_ENTRY_ADDED:
+ if (!ioc->hide_ir_msg)
+ desc = "Log Entry Added";
+ break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
+ case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
+ desc = "Cable Event";
+ break;
+ case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+ desc = "SAS Device Discovery Error";
+ break;
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+ desc = "PCIE Device Status Change";
+ break;
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ {
+ Mpi26EventDataPCIeEnumeration_t *event_data =
+ (Mpi26EventDataPCIeEnumeration_t *)mpi_reply->EventData;
+ pr_info(MPT3SAS_FMT "PCIE Enumeration: (%s)", ioc->name,
+ (event_data->ReasonCode ==
+ MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->EnumerationStatus)
+ pr_info("enumeration_status(0x%08x)",
+ le32_to_cpu(event_data->EnumerationStatus));
+ pr_info("\n");
+ return;
+ }
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ desc = "PCIE Topology Change List";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
+}
+
+/**
+ * _base_sas_log_info - verbose translation of firmware log info
+ * @ioc: per adapter object
+ * @log_info: log info
+ */
+static void
+_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
+{
+ union loginfo_type {
+ u32 loginfo;
+ struct {
+ u32 subcode:16;
+ u32 code:8;
+ u32 originator:4;
+ u32 bus_type:4;
+ } dw;
+ };
+ union loginfo_type sas_loginfo;
+ char *originator_str = NULL;
+
+ sas_loginfo.loginfo = log_info;
+ if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
+ return;
+
+ /* each nexus loss loginfo */
+ if (log_info == 0x31170000)
+ return;
+
+ /* eat the loginfos associated with task aborts */
+ if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
+ 0x31140000 || log_info == 0x31130000))
+ return;
+
+ switch (sas_loginfo.dw.originator) {
+ case 0:
+ originator_str = "IOP";
+ break;
+ case 1:
+ originator_str = "PL";
+ break;
+ case 2:
+ if (!ioc->hide_ir_msg)
+ originator_str = "IR";
+ else
+ originator_str = "WarpDrive";
+ break;
+ }
+
+ pr_warn(MPT3SAS_FMT
+ "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
+ ioc->name, log_info,
+ originator_str, sas_loginfo.dw.code,
+ sas_loginfo.dw.subcode);
+}
+
+/**
+ * _base_display_reply_info -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ */
+static void
+_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+ u32 loginfo = 0;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (unlikely(!mpi_reply)) {
+ pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+
+ if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
+ (ioc->logging_level & MPT_DEBUG_REPLY)) {
+ _base_sas_ioc_info(ioc , mpi_reply,
+ mpt3sas_base_get_msg_frame(ioc, smid));
+ }
+
+ if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
+ _base_sas_log_info(ioc, loginfo);
+ }
+
+ if (ioc_status || loginfo) {
+ ioc_status &= MPI2_IOCSTATUS_MASK;
+ mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
+ }
+}
+
+/**
+ * mpt3sas_base_done - base internal command completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return:
+ * 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+ return mpt3sas_check_for_pending_internal_cmds(ioc, smid);
+
+ if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
+ return 1;
+
+ ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
+ if (mpi_reply) {
+ ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
+ memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ }
+ ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
+
+ complete(&ioc->base_cmds.done);
+ return 1;
+}
+
+/**
+ * _base_async_event - main callback handler for firmware asyn events
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return:
+ * 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
+{
+ Mpi2EventNotificationReply_t *mpi_reply;
+ Mpi2EventAckRequest_t *ack_request;
+ u16 smid;
+ struct _event_ack_list *delayed_event_ack;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (!mpi_reply)
+ return 1;
+ if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
+ return 1;
+
+ _base_display_event_data(ioc, mpi_reply);
+
+ if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
+ goto out;
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ delayed_event_ack = kzalloc(sizeof(*delayed_event_ack),
+ GFP_ATOMIC);
+ if (!delayed_event_ack)
+ goto out;
+ INIT_LIST_HEAD(&delayed_event_ack->list);
+ delayed_event_ack->Event = mpi_reply->Event;
+ delayed_event_ack->EventContext = mpi_reply->EventContext;
+ list_add_tail(&delayed_event_ack->list,
+ &ioc->delayed_event_ack_list);
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "DELAYED: EVENT ACK: event (0x%04x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->Event)));
+ goto out;
+ }
+
+ ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+ ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+ ack_request->Event = mpi_reply->Event;
+ ack_request->EventContext = mpi_reply->EventContext;
+ ack_request->VF_ID = 0; /* TODO */
+ ack_request->VP_ID = 0;
+ mpt3sas_base_put_smid_default(ioc, smid);
+
+ out:
+
+ /* scsih callback handler */
+ mpt3sas_scsih_event_callback(ioc, msix_index, reply);
+
+ /* ctl callback handler */
+ mpt3sas_ctl_event_callback(ioc, msix_index, reply);
+
+ return 1;
+}
+
+static struct scsiio_tracker *
+_get_st_from_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ struct scsi_cmnd *cmd;
+
+ if (WARN_ON(!smid) ||
+ WARN_ON(smid >= ioc->hi_priority_smid))
+ return NULL;
+
+ cmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+ if (cmd)
+ return scsi_cmd_priv(cmd);
+
+ return NULL;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ int i;
+ u16 ctl_smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
+ u8 cb_idx = 0xFF;
+
+ if (smid < ioc->hi_priority_smid) {
+ struct scsiio_tracker *st;
+
+ if (smid < ctl_smid) {
+ st = _get_st_from_smid(ioc, smid);
+ if (st)
+ cb_idx = st->cb_idx;
+ } else if (smid == ctl_smid)
+ cb_idx = ioc->ctl_cb_idx;
+ } else if (smid < ioc->internal_smid) {
+ i = smid - ioc->hi_priority_smid;
+ cb_idx = ioc->hpr_lookup[i].cb_idx;
+ } else if (smid <= ioc->hba_queue_depth) {
+ i = smid - ioc->internal_smid;
+ cb_idx = ioc->internal_lookup[i].cb_idx;
+ }
+ return cb_idx;
+}
+
+/**
+ * _base_mask_interrupts - disable interrupts
+ * @ioc: per adapter object
+ *
+ * Disabling ResetIRQ, Reply and Doorbell Interrupts
+ */
+static void
+_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 him_register;
+
+ ioc->mask_interrupts = 1;
+ him_register = readl(&ioc->chip->HostInterruptMask);
+ him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
+ writel(him_register, &ioc->chip->HostInterruptMask);
+ readl(&ioc->chip->HostInterruptMask);
+}
+
+/**
+ * _base_unmask_interrupts - enable interrupts
+ * @ioc: per adapter object
+ *
+ * Enabling only Reply Interrupts
+ */
+static void
+_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 him_register;
+
+ him_register = readl(&ioc->chip->HostInterruptMask);
+ him_register &= ~MPI2_HIM_RIM;
+ writel(him_register, &ioc->chip->HostInterruptMask);
+ ioc->mask_interrupts = 0;
+}
+
+union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+};
+
+/**
+ * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ *
+ * Return: IRQ_HANDLED if processed, else IRQ_NONE.
+ */
+static irqreturn_t
+_base_interrupt(int irq, void *bus_id)
+{
+ struct adapter_reply_queue *reply_q = bus_id;
+ union reply_descriptor rd;
+ u32 completed_cmds;
+ u8 request_desript_type;
+ u16 smid;
+ u8 cb_idx;
+ u32 reply;
+ u8 msix_index = reply_q->msix_index;
+ struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
+ Mpi2ReplyDescriptorsUnion_t *rpf;
+ u8 rc;
+
+ if (ioc->mask_interrupts)
+ return IRQ_NONE;
+
+ if (!atomic_add_unless(&reply_q->busy, 1, 1))
+ return IRQ_NONE;
+
+ rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
+ request_desript_type = rpf->Default.ReplyFlags
+ & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+ if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
+ atomic_dec(&reply_q->busy);
+ return IRQ_NONE;
+ }
+
+ completed_cmds = 0;
+ cb_idx = 0xFF;
+ do {
+ rd.word = le64_to_cpu(rpf->Words);
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
+ goto out;
+ reply = 0;
+ smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
+ if (request_desript_type ==
+ MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
+ request_desript_type ==
+ MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS ||
+ request_desript_type ==
+ MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS) {
+ cb_idx = _base_get_cb_idx(ioc, smid);
+ if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+ (likely(mpt_callbacks[cb_idx] != NULL))) {
+ rc = mpt_callbacks[cb_idx](ioc, smid,
+ msix_index, 0);
+ if (rc)
+ mpt3sas_base_free_smid(ioc, smid);
+ }
+ } else if (request_desript_type ==
+ MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
+ reply = le32_to_cpu(
+ rpf->AddressReply.ReplyFrameAddress);
+ if (reply > ioc->reply_dma_max_address ||
+ reply < ioc->reply_dma_min_address)
+ reply = 0;
+ if (smid) {
+ cb_idx = _base_get_cb_idx(ioc, smid);
+ if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+ (likely(mpt_callbacks[cb_idx] != NULL))) {
+ rc = mpt_callbacks[cb_idx](ioc, smid,
+ msix_index, reply);
+ if (reply)
+ _base_display_reply_info(ioc,
+ smid, msix_index, reply);
+ if (rc)
+ mpt3sas_base_free_smid(ioc,
+ smid);
+ }
+ } else {
+ _base_async_event(ioc, msix_index, reply);
+ }
+
+ /* reply free queue handling */
+ if (reply) {
+ ioc->reply_free_host_index =
+ (ioc->reply_free_host_index ==
+ (ioc->reply_free_queue_depth - 1)) ?
+ 0 : ioc->reply_free_host_index + 1;
+ ioc->reply_free[ioc->reply_free_host_index] =
+ cpu_to_le32(reply);
+ if (ioc->is_mcpu_endpoint)
+ _base_clone_reply_to_sys_mem(ioc,
+ reply,
+ ioc->reply_free_host_index);
+ writel(ioc->reply_free_host_index,
+ &ioc->chip->ReplyFreeHostIndex);
+ }
+ }
+
+ rpf->Words = cpu_to_le64(ULLONG_MAX);
+ reply_q->reply_post_host_index =
+ (reply_q->reply_post_host_index ==
+ (ioc->reply_post_queue_depth - 1)) ? 0 :
+ reply_q->reply_post_host_index + 1;
+ request_desript_type =
+ reply_q->reply_post_free[reply_q->reply_post_host_index].
+ Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+ completed_cmds++;
+ /* Update the reply post host index after continuously
+ * processing the threshold number of Reply Descriptors.
+ * So that FW can find enough entries to post the Reply
+ * Descriptors in the reply descriptor post queue.
+ */
+ if (completed_cmds > ioc->hba_queue_depth/3) {
+ if (ioc->combined_reply_queue) {
+ writel(reply_q->reply_post_host_index |
+ ((msix_index & 7) <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT),
+ ioc->replyPostRegisterIndex[msix_index/8]);
+ } else {
+ writel(reply_q->reply_post_host_index |
+ (msix_index <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT),
+ &ioc->chip->ReplyPostHostIndex);
+ }
+ completed_cmds = 1;
+ }
+ if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+ goto out;
+ if (!reply_q->reply_post_host_index)
+ rpf = reply_q->reply_post_free;
+ else
+ rpf++;
+ } while (1);
+
+ out:
+
+ if (!completed_cmds) {
+ atomic_dec(&reply_q->busy);
+ return IRQ_NONE;
+ }
+
+ if (ioc->is_warpdrive) {
+ writel(reply_q->reply_post_host_index,
+ ioc->reply_post_host_index[msix_index]);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+ }
+
+ /* Update Reply Post Host Index.
+ * For those HBA's which support combined reply queue feature
+ * 1. Get the correct Supplemental Reply Post Host Index Register.
+ * i.e. (msix_index / 8)th entry from Supplemental Reply Post Host
+ * Index Register address bank i.e replyPostRegisterIndex[],
+ * 2. Then update this register with new reply host index value
+ * in ReplyPostIndex field and the MSIxIndex field with
+ * msix_index value reduced to a value between 0 and 7,
+ * using a modulo 8 operation. Since each Supplemental Reply Post
+ * Host Index Register supports 8 MSI-X vectors.
+ *
+ * For other HBA's just update the Reply Post Host Index register with
+ * new reply host index value in ReplyPostIndex Field and msix_index
+ * value in MSIxIndex field.
+ */
+ if (ioc->combined_reply_queue)
+ writel(reply_q->reply_post_host_index | ((msix_index & 7) <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT),
+ ioc->replyPostRegisterIndex[msix_index/8]);
+ else
+ writel(reply_q->reply_post_host_index | (msix_index <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT),
+ &ioc->chip->ReplyPostHostIndex);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+}
+
+/**
+ * _base_is_controller_msix_enabled - is controller support muli-reply queues
+ * @ioc: per adapter object
+ *
+ * Return: Whether or not MSI/X is enabled.
+ */
+static inline int
+_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
+{
+ return (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
+}
+
+/**
+ * mpt3sas_base_sync_reply_irqs - flush pending MSIX interrupts
+ * @ioc: per adapter object
+ * Context: non ISR conext
+ *
+ * Called when a Task Management request has completed.
+ */
+void
+mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q;
+
+ /* If MSIX capability is turned off
+ * then multi-queues are not enabled
+ */
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ if (ioc->shost_recovery || ioc->remove_host ||
+ ioc->pci_error_recovery)
+ return;
+ /* TMs are on msix_index == 0 */
+ if (reply_q->msix_index == 0)
+ continue;
+ synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index));
+ }
+}
+
+/**
+ * mpt3sas_base_release_callback_handler - clear interrupt callback handler
+ * @cb_idx: callback index
+ */
+void
+mpt3sas_base_release_callback_handler(u8 cb_idx)
+{
+ mpt_callbacks[cb_idx] = NULL;
+}
+
+/**
+ * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
+ * @cb_func: callback function
+ *
+ * Return: Index of @cb_func.
+ */
+u8
+mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
+{
+ u8 cb_idx;
+
+ for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
+ if (mpt_callbacks[cb_idx] == NULL)
+ break;
+
+ mpt_callbacks[cb_idx] = cb_func;
+ return cb_idx;
+}
+
+/**
+ * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
+ */
+void
+mpt3sas_base_initialize_callback_handler(void)
+{
+ u8 cb_idx;
+
+ for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
+ mpt3sas_base_release_callback_handler(cb_idx);
+}
+
+
+/**
+ * _base_build_zero_len_sge - build zero length sg entry
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ */
+static void
+_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+ u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
+ MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
+ MPI2_SGE_FLAGS_SHIFT);
+ ioc->base_add_sg_single(paddr, flags_length, -1);
+}
+
+/**
+ * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+ Mpi2SGESimple32_t *sgel = paddr;
+
+ flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
+ MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+ sgel->FlagsLength = cpu_to_le32(flags_length);
+ sgel->Address = cpu_to_le32(dma_addr);
+}
+
+
+/**
+ * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+ Mpi2SGESimple64_t *sgel = paddr;
+
+ flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
+ MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+ sgel->FlagsLength = cpu_to_le32(flags_length);
+ sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_get_chain_buffer_tracker - obtain chain tracker
+ * @ioc: per adapter object
+ * @scmd: SCSI commands of the IO request
+ *
+ * Return: chain tracker from chain_lookup table using key as
+ * smid and smid's chain_offset.
+ */
+static struct chain_tracker *
+_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd)
+{
+ struct chain_tracker *chain_req;
+ struct scsiio_tracker *st = scsi_cmd_priv(scmd);
+ u16 smid = st->smid;
+ u8 chain_offset =
+ atomic_read(&ioc->chain_lookup[smid - 1].chain_offset);
+
+ if (chain_offset == ioc->chains_needed_per_io)
+ return NULL;
+
+ chain_req = &ioc->chain_lookup[smid - 1].chains_per_smid[chain_offset];
+ atomic_inc(&ioc->chain_lookup[smid - 1].chain_offset);
+ return chain_req;
+}
+
+
+/**
+ * _base_build_sg - build generic sg
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ */
+static void
+_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ u32 sgl_flags;
+
+ if (!data_out_sz && !data_in_sz) {
+ _base_build_zero_len_sge(ioc, psge);
+ return;
+ }
+
+ if (data_out_sz && data_in_sz) {
+ /* WRITE sgel first */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+
+ /* incr sgel */
+ psge += ioc->sge_size;
+
+ /* READ sgel last */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ } else if (data_out_sz) /* WRITE */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+ } else if (data_in_sz) /* READ */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ }
+}
+
+/* IEEE format sgls */
+
+/**
+ * _base_build_nvme_prp - This function is called for NVMe end devices to build
+ * a native SGL (NVMe PRP). The native SGL is built starting in the first PRP
+ * entry of the NVMe message (PRP1). If the data buffer is small enough to be
+ * described entirely using PRP1, then PRP2 is not used. If needed, PRP2 is
+ * used to describe a larger data buffer. If the data buffer is too large to
+ * describe using the two PRP entriess inside the NVMe message, then PRP1
+ * describes the first data memory segment, and PRP2 contains a pointer to a PRP
+ * list located elsewhere in memory to describe the remaining data memory
+ * segments. The PRP list will be contiguous.
+ *
+ * The native SGL for NVMe devices is a Physical Region Page (PRP). A PRP
+ * consists of a list of PRP entries to describe a number of noncontigous
+ * physical memory segments as a single memory buffer, just as a SGL does. Note
+ * however, that this function is only used by the IOCTL call, so the memory
+ * given will be guaranteed to be contiguous. There is no need to translate
+ * non-contiguous SGL into a PRP in this case. All PRPs will describe
+ * contiguous space that is one page size each.
+ *
+ * Each NVMe message contains two PRP entries. The first (PRP1) either contains
+ * a PRP list pointer or a PRP element, depending upon the command. PRP2
+ * contains the second PRP element if the memory being described fits within 2
+ * PRP entries, or a PRP list pointer if the PRP spans more than two entries.
+ *
+ * A PRP list pointer contains the address of a PRP list, structured as a linear
+ * array of PRP entries. Each PRP entry in this list describes a segment of
+ * physical memory.
+ *
+ * Each 64-bit PRP entry comprises an address and an offset field. The address
+ * always points at the beginning of a 4KB physical memory page, and the offset
+ * describes where within that 4KB page the memory segment begins. Only the
+ * first element in a PRP list may contain a non-zero offest, implying that all
+ * memory segments following the first begin at the start of a 4KB page.
+ *
+ * Each PRP element normally describes 4KB of physical memory, with exceptions
+ * for the first and last elements in the list. If the memory being described
+ * by the list begins at a non-zero offset within the first 4KB page, then the
+ * first PRP element will contain a non-zero offset indicating where the region
+ * begins within the 4KB page. The last memory segment may end before the end
+ * of the 4KB segment, depending upon the overall size of the memory being
+ * described by the PRP list.
+ *
+ * Since PRP entries lack any indication of size, the overall data buffer length
+ * is used to determine where the end of the data memory buffer is located, and
+ * how many PRP entries are required to describe it.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index for getting asscociated SGL
+ * @nvme_encap_request: the NVMe request msg frame pointer
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ */
+static void
+_base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ int prp_size = NVME_PRP_SIZE;
+ __le64 *prp_entry, *prp1_entry, *prp2_entry;
+ __le64 *prp_page;
+ dma_addr_t prp_entry_dma, prp_page_dma, dma_addr;
+ u32 offset, entry_len;
+ u32 page_mask_result, page_mask;
+ size_t length;
+ struct mpt3sas_nvme_cmd *nvme_cmd =
+ (void *)nvme_encap_request->NVMe_Command;
+
+ /*
+ * Not all commands require a data transfer. If no data, just return
+ * without constructing any PRP.
+ */
+ if (!data_in_sz && !data_out_sz)
+ return;
+ prp1_entry = &nvme_cmd->prp1;
+ prp2_entry = &nvme_cmd->prp2;
+ prp_entry = prp1_entry;
+ /*
+ * For the PRP entries, use the specially allocated buffer of
+ * contiguous memory.
+ */
+ prp_page = (__le64 *)mpt3sas_base_get_pcie_sgl(ioc, smid);
+ prp_page_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+ /*
+ * Check if we are within 1 entry of a page boundary we don't
+ * want our first entry to be a PRP List entry.
+ */
+ page_mask = ioc->page_size - 1;
+ page_mask_result = (uintptr_t)((u8 *)prp_page + prp_size) & page_mask;
+ if (!page_mask_result) {
+ /* Bump up to next page boundary. */
+ prp_page = (__le64 *)((u8 *)prp_page + prp_size);
+ prp_page_dma = prp_page_dma + prp_size;
+ }
+
+ /*
+ * Set PRP physical pointer, which initially points to the current PRP
+ * DMA memory page.
+ */
+ prp_entry_dma = prp_page_dma;
+
+ /* Get physical address and length of the data buffer. */
+ if (data_in_sz) {
+ dma_addr = data_in_dma;
+ length = data_in_sz;
+ } else {
+ dma_addr = data_out_dma;
+ length = data_out_sz;
+ }
+
+ /* Loop while the length is not zero. */
+ while (length) {
+ /*
+ * Check if we need to put a list pointer here if we are at
+ * page boundary - prp_size (8 bytes).
+ */
+ page_mask_result = (prp_entry_dma + prp_size) & page_mask;
+ if (!page_mask_result) {
+ /*
+ * This is the last entry in a PRP List, so we need to
+ * put a PRP list pointer here. What this does is:
+ * - bump the current memory pointer to the next
+ * address, which will be the next full page.
+ * - set the PRP Entry to point to that page. This
+ * is now the PRP List pointer.
+ * - bump the PRP Entry pointer the start of the
+ * next page. Since all of this PRP memory is
+ * contiguous, no need to get a new page - it's
+ * just the next address.
+ */
+ prp_entry_dma++;
+ *prp_entry = cpu_to_le64(prp_entry_dma);
+ prp_entry++;
+ }
+
+ /* Need to handle if entry will be part of a page. */
+ offset = dma_addr & page_mask;
+ entry_len = ioc->page_size - offset;
+
+ if (prp_entry == prp1_entry) {
+ /*
+ * Must fill in the first PRP pointer (PRP1) before
+ * moving on.
+ */
+ *prp1_entry = cpu_to_le64(dma_addr);
+
+ /*
+ * Now point to the second PRP entry within the
+ * command (PRP2).
+ */
+ prp_entry = prp2_entry;
+ } else if (prp_entry == prp2_entry) {
+ /*
+ * Should the PRP2 entry be a PRP List pointer or just
+ * a regular PRP pointer? If there is more than one
+ * more page of data, must use a PRP List pointer.
+ */
+ if (length > ioc->page_size) {
+ /*
+ * PRP2 will contain a PRP List pointer because
+ * more PRP's are needed with this command. The
+ * list will start at the beginning of the
+ * contiguous buffer.
+ */
+ *prp2_entry = cpu_to_le64(prp_entry_dma);
+
+ /*
+ * The next PRP Entry will be the start of the
+ * first PRP List.
+ */
+ prp_entry = prp_page;
+ } else {
+ /*
+ * After this, the PRP Entries are complete.
+ * This command uses 2 PRP's and no PRP list.
+ */
+ *prp2_entry = cpu_to_le64(dma_addr);
+ }
+ } else {
+ /*
+ * Put entry in list and bump the addresses.
+ *
+ * After PRP1 and PRP2 are filled in, this will fill in
+ * all remaining PRP entries in a PRP List, one per
+ * each time through the loop.
+ */
+ *prp_entry = cpu_to_le64(dma_addr);
+ prp_entry++;
+ prp_entry_dma++;
+ }
+
+ /*
+ * Bump the phys address of the command's data buffer by the
+ * entry_len.
+ */
+ dma_addr += entry_len;
+
+ /* Decrement length accounting for last partial page. */
+ if (entry_len > length)
+ length = 0;
+ else
+ length -= entry_len;
+ }
+}
+
+/**
+ * base_make_prp_nvme -
+ * Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only
+ *
+ * @ioc: per adapter object
+ * @scmd: SCSI command from the mid-layer
+ * @mpi_request: mpi request
+ * @smid: msg Index
+ * @sge_count: scatter gather element count.
+ *
+ * Return: true: PRPs are built
+ * false: IEEE SGLs needs to be built
+ */
+static void
+base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd,
+ Mpi25SCSIIORequest_t *mpi_request,
+ u16 smid, int sge_count)
+{
+ int sge_len, num_prp_in_chain = 0;
+ Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl;
+ __le64 *curr_buff;
+ dma_addr_t msg_dma, sge_addr, offset;
+ u32 page_mask, page_mask_result;
+ struct scatterlist *sg_scmd;
+ u32 first_prp_len;
+ int data_len = scsi_bufflen(scmd);
+ u32 nvme_pg_size;
+
+ nvme_pg_size = max_t(u32, ioc->page_size, NVME_PRP_PAGE_SIZE);
+ /*
+ * Nvme has a very convoluted prp format. One prp is required
+ * for each page or partial page. Driver need to split up OS sg_list
+ * entries if it is longer than one page or cross a page
+ * boundary. Driver also have to insert a PRP list pointer entry as
+ * the last entry in each physical page of the PRP list.
+ *
+ * NOTE: The first PRP "entry" is actually placed in the first
+ * SGL entry in the main message as IEEE 64 format. The 2nd
+ * entry in the main message is the chain element, and the rest
+ * of the PRP entries are built in the contiguous pcie buffer.
+ */
+ page_mask = nvme_pg_size - 1;
+
+ /*
+ * Native SGL is needed.
+ * Put a chain element in main message frame that points to the first
+ * chain buffer.
+ *
+ * NOTE: The ChainOffset field must be 0 when using a chain pointer to
+ * a native SGL.
+ */
+
+ /* Set main message chain element pointer */
+ main_chain_element = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ /*
+ * For NVMe the chain element needs to be the 2nd SG entry in the main
+ * message.
+ */
+ main_chain_element = (Mpi25IeeeSgeChain64_t *)
+ ((u8 *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64));
+
+ /*
+ * For the PRP entries, use the specially allocated buffer of
+ * contiguous memory. Normal chain buffers can't be used
+ * because each chain buffer would need to be the size of an OS
+ * page (4k).
+ */
+ curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid);
+ msg_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+ main_chain_element->Address = cpu_to_le64(msg_dma);
+ main_chain_element->NextChainOffset = 0;
+ main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+ MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
+
+ /* Build first prp, sge need not to be page aligned*/
+ ptr_first_sgl = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ sg_scmd = scsi_sglist(scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+
+ offset = sge_addr & page_mask;
+ first_prp_len = nvme_pg_size - offset;
+
+ ptr_first_sgl->Address = cpu_to_le64(sge_addr);
+ ptr_first_sgl->Length = cpu_to_le32(first_prp_len);
+
+ data_len -= first_prp_len;
+
+ if (sge_len > first_prp_len) {
+ sge_addr += first_prp_len;
+ sge_len -= first_prp_len;
+ } else if (data_len && (sge_len == first_prp_len)) {
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ for (;;) {
+ offset = sge_addr & page_mask;
+
+ /* Put PRP pointer due to page boundary*/
+ page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask;
+ if (unlikely(!page_mask_result)) {
+ scmd_printk(KERN_NOTICE,
+ scmd, "page boundary curr_buff: 0x%p\n",
+ curr_buff);
+ msg_dma += 8;
+ *curr_buff = cpu_to_le64(msg_dma);
+ curr_buff++;
+ num_prp_in_chain++;
+ }
+
+ *curr_buff = cpu_to_le64(sge_addr);
+ curr_buff++;
+ msg_dma += 8;
+ num_prp_in_chain++;
+
+ sge_addr += nvme_pg_size;
+ sge_len -= nvme_pg_size;
+ data_len -= nvme_pg_size;
+
+ if (data_len <= 0)
+ break;
+
+ if (sge_len > 0)
+ continue;
+
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ main_chain_element->Length =
+ cpu_to_le32(num_prp_in_chain * sizeof(u64));
+ return;
+}
+
+static bool
+base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device, struct scsi_cmnd *scmd, int sge_count)
+{
+ u32 data_length = 0;
+ bool build_prp = true;
+
+ data_length = scsi_bufflen(scmd);
+
+ /* If Datalenth is <= 16K and number of SGE’s entries are <= 2
+ * we built IEEE SGL
+ */
+ if ((data_length <= NVME_PRP_PAGE_SIZE*4) && (sge_count <= 2))
+ build_prp = false;
+
+ return build_prp;
+}
+
+/**
+ * _base_check_pcie_native_sgl - This function is called for PCIe end devices to
+ * determine if the driver needs to build a native SGL. If so, that native
+ * SGL is built in the special contiguous buffers allocated especially for
+ * PCIe SGL creation. If the driver will not build a native SGL, return
+ * TRUE and a normal IEEE SGL will be built. Currently this routine
+ * supports NVMe.
+ * @ioc: per adapter object
+ * @mpi_request: mf request pointer
+ * @smid: system request message index
+ * @scmd: scsi command
+ * @pcie_device: points to the PCIe device's info
+ *
+ * Return: 0 if native SGL was built, 1 if no SGL was built
+ */
+static int
+_base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,
+ Mpi25SCSIIORequest_t *mpi_request, u16 smid, struct scsi_cmnd *scmd,
+ struct _pcie_device *pcie_device)
+{
+ int sges_left;
+
+ /* Get the SG list pointer and info. */
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "scsi_dma_map failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return 1;
+ }
+
+ /* Check if we need to build a native SG list. */
+ if (base_is_prp_possible(ioc, pcie_device,
+ scmd, sges_left) == 0) {
+ /* We built a native SG list, just return. */
+ goto out;
+ }
+
+ /*
+ * Build native NVMe PRP.
+ */
+ base_make_prp_nvme(ioc, scmd, mpi_request,
+ smid, sges_left);
+
+ return 0;
+out:
+ scsi_dma_unmap(scmd);
+ return 1;
+}
+
+/**
+ * _base_add_sg_single_ieee - add sg element for IEEE format
+ * @paddr: virtual address for SGE
+ * @flags: SGE flags
+ * @chain_offset: number of 128 byte elements from start of segment
+ * @length: data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
+ dma_addr_t dma_addr)
+{
+ Mpi25IeeeSgeChain64_t *sgel = paddr;
+
+ sgel->Flags = flags;
+ sgel->NextChainOffset = chain_offset;
+ sgel->Length = cpu_to_le32(length);
+ sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ */
+static void
+_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+ u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
+
+ _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
+}
+
+/**
+ * _base_build_sg_scmd - main sg creation routine
+ * pcie_device is unused here!
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * @unused: unused pcie_device pointer
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Return: 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *unused)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ u32 chain_flags;
+ int sges_left;
+ u32 sges_in_segment;
+ u32 sgl_flags;
+ u32 sgl_flags_last_element;
+ u32 sgl_flags_end_buffer;
+ struct chain_tracker *chain_req;
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+ sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "pci_map_sg failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = ioc->max_sges_in_main_message;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+ (sges_in_segment * ioc->sge_size))/4;
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element | sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the chain flags and pointers */
+ chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+ chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : (sges_in_segment * ioc->sge_size)/4;
+ chain_length = sges_in_segment * ioc->sge_size;
+ if (chain_offset) {
+ chain_offset = chain_offset <<
+ MPI2_SGE_CHAIN_OFFSET_SHIFT;
+ chain_length += ioc->sge_size;
+ }
+ ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+ chain_length, chain_dma);
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left) {
+ if (sges_left == 1)
+ ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
+ * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * @pcie_device: Pointer to pcie_device. If set, the pcie native sgl will be
+ * constructed on need.
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Return: 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device)
+{
+ Mpi25SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ int sges_left;
+ u32 sges_in_segment;
+ u8 simple_sgl_flags;
+ u8 simple_sgl_flags_last;
+ u8 chain_sgl_flags;
+ struct chain_tracker *chain_req;
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ simple_sgl_flags_last = simple_sgl_flags |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+ chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+
+ /* Check if we need to build a native SG list. */
+ if ((pcie_device) && (_base_check_pcie_native_sgl(ioc, mpi_request,
+ smid, scmd, pcie_device) == 0)) {
+ /* We built a native SG list, just return. */
+ return 0;
+ }
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "pci_map_sg failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = (ioc->request_sz -
+ offsetof(Mpi25SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
+ (offsetof(Mpi25SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment > 1) {
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the pointers */
+ chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : sges_in_segment;
+ chain_length = sges_in_segment * ioc->sge_size_ieee;
+ if (chain_offset)
+ chain_length += ioc->sge_size_ieee;
+ _base_add_sg_single_ieee(sg_local, chain_sgl_flags,
+ chain_offset, chain_length, chain_dma);
+
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left > 0) {
+ if (sges_left == 1)
+ _base_add_sg_single_ieee(sg_local,
+ simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
+ * _base_build_sg_ieee - build generic sg for IEEE format
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ */
+static void
+_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ u8 sgl_flags;
+
+ if (!data_out_sz && !data_in_sz) {
+ _base_build_zero_len_sge_ieee(ioc, psge);
+ return;
+ }
+
+ if (data_out_sz && data_in_sz) {
+ /* WRITE sgel first */
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+ data_out_dma);
+
+ /* incr sgel */
+ psge += ioc->sge_size_ieee;
+
+ /* READ sgel last */
+ sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+ data_in_dma);
+ } else if (data_out_sz) /* WRITE */ {
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+ data_out_dma);
+ } else if (data_in_sz) /* READ */ {
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+ data_in_dma);
+ }
+}
+
+#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
+
+/**
+ * _base_config_dma_addressing - set dma addressing
+ * @ioc: per adapter object
+ * @pdev: PCI device struct
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
+{
+ struct sysinfo s;
+ u64 consistent_dma_mask;
+
+ if (ioc->is_mcpu_endpoint)
+ goto try_32bit;
+
+ if (ioc->dma_mask)
+ consistent_dma_mask = DMA_BIT_MASK(64);
+ else
+ consistent_dma_mask = DMA_BIT_MASK(32);
+
+ if (sizeof(dma_addr_t) > 4) {
+ const uint64_t required_mask =
+ dma_get_required_mask(&pdev->dev);
+ if ((required_mask > DMA_BIT_MASK(32)) &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
+ ioc->base_add_sg_single = &_base_add_sg_single_64;
+ ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+ ioc->dma_mask = 64;
+ goto out;
+ }
+ }
+
+ try_32bit:
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ ioc->base_add_sg_single = &_base_add_sg_single_32;
+ ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+ ioc->dma_mask = 32;
+ } else
+ return -ENODEV;
+
+ out:
+ si_meminfo(&s);
+ pr_info(MPT3SAS_FMT
+ "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+ ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
+
+ return 0;
+}
+
+static int
+_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
+ struct pci_dev *pdev)
+{
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * _base_check_enable_msix - checks MSIX capabable.
+ * @ioc: per adapter object
+ *
+ * Check to see if card is capable of MSIX, and set number
+ * of available msix vectors
+ */
+static int
+_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ int base;
+ u16 message_control;
+
+ /* Check whether controller SAS2008 B0 controller,
+ * if it is SAS2008 B0 controller use IO-APIC instead of MSIX
+ */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) {
+ return -EINVAL;
+ }
+
+ base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
+ if (!base) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
+ ioc->name));
+ return -EINVAL;
+ }
+
+ /* get msix vector count */
+ /* NUMA_IO not supported for older controllers */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+ ioc->msix_vector_count = 1;
+ else {
+ pci_read_config_word(ioc->pdev, base + 2, &message_control);
+ ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "msix is supported, vector_count(%d)\n",
+ ioc->name, ioc->msix_vector_count));
+ return 0;
+}
+
+/**
+ * _base_free_irq - free irq
+ * @ioc: per adapter object
+ *
+ * Freeing respective reply_queue from the list.
+ */
+static void
+_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q, *next;
+
+ if (list_empty(&ioc->reply_queue_list))
+ return;
+
+ list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+ list_del(&reply_q->list);
+ free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index),
+ reply_q);
+ kfree(reply_q);
+ }
+}
+
+/**
+ * _base_request_irq - request irq
+ * @ioc: per adapter object
+ * @index: msix index into vector table
+ *
+ * Inserting respective reply_queue into the list.
+ */
+static int
+_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index)
+{
+ struct pci_dev *pdev = ioc->pdev;
+ struct adapter_reply_queue *reply_q;
+ int r;
+
+ reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
+ if (!reply_q) {
+ pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n",
+ ioc->name, (int)sizeof(struct adapter_reply_queue));
+ return -ENOMEM;
+ }
+ reply_q->ioc = ioc;
+ reply_q->msix_index = index;
+
+ atomic_set(&reply_q->busy, 0);
+ if (ioc->msix_enable)
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
+ ioc->driver_name, ioc->id, index);
+ else
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
+ ioc->driver_name, ioc->id);
+ r = request_irq(pci_irq_vector(pdev, index), _base_interrupt,
+ IRQF_SHARED, reply_q->name, reply_q);
+ if (r) {
+ pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n",
+ reply_q->name, pci_irq_vector(pdev, index));
+ kfree(reply_q);
+ return -EBUSY;
+ }
+
+ INIT_LIST_HEAD(&reply_q->list);
+ list_add_tail(&reply_q->list, &ioc->reply_queue_list);
+ return 0;
+}
+
+/**
+ * _base_assign_reply_queues - assigning msix index for each cpu
+ * @ioc: per adapter object
+ *
+ * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
+ *
+ * It would nice if we could call irq_set_affinity, however it is not
+ * an exported symbol
+ */
+static void
+_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
+
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
+
+ nr_cpus = num_online_cpus();
+ nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
+ ioc->facts.MaxMSIxVectors);
+ if (!nr_msix)
+ return;
+
+ if (smp_affinity_enable) {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ const cpumask_t *mask = pci_irq_get_affinity(ioc->pdev,
+ reply_q->msix_index);
+ if (!mask) {
+ pr_warn(MPT3SAS_FMT "no affinity for msi %x\n",
+ ioc->name, reply_q->msix_index);
+ continue;
+ }
+
+ for_each_cpu_and(cpu, mask, cpu_online_mask) {
+ if (cpu >= ioc->cpu_msix_table_sz)
+ break;
+ ioc->cpu_msix_table[cpu] = reply_q->msix_index;
+ }
+ }
+ return;
+ }
+ cpu = cpumask_first(cpu_online_mask);
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
+ unsigned int i, group = nr_cpus / nr_msix;
+
+ if (cpu >= nr_cpus)
+ break;
+
+ if (index < nr_cpus % nr_msix)
+ group++;
+
+ for (i = 0 ; i < group ; i++) {
+ ioc->cpu_msix_table[cpu] = reply_q->msix_index;
+ cpu = cpumask_next(cpu, cpu_online_mask);
+ }
+ index++;
+ }
+}
+
+/**
+ * _base_disable_msix - disables msix
+ * @ioc: per adapter object
+ *
+ */
+static void
+_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ if (!ioc->msix_enable)
+ return;
+ pci_disable_msix(ioc->pdev);
+ ioc->msix_enable = 0;
+}
+
+/**
+ * _base_enable_msix - enables msix, failback to io_apic
+ * @ioc: per adapter object
+ *
+ */
+static int
+_base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ int r;
+ int i, local_max_msix_vectors;
+ u8 try_msix = 0;
+ unsigned int irq_flags = PCI_IRQ_MSIX;
+
+ if (msix_disable == -1 || msix_disable == 0)
+ try_msix = 1;
+
+ if (!try_msix)
+ goto try_ioapic;
+
+ if (_base_check_enable_msix(ioc) != 0)
+ goto try_ioapic;
+
+ ioc->reply_queue_count = min_t(int, ioc->cpu_count,
+ ioc->msix_vector_count);
+
+ printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
+ ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
+ ioc->cpu_count, max_msix_vectors);
+
+ if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+ local_max_msix_vectors = (reset_devices) ? 1 : 8;
+ else
+ local_max_msix_vectors = max_msix_vectors;
+
+ if (local_max_msix_vectors > 0)
+ ioc->reply_queue_count = min_t(int, local_max_msix_vectors,
+ ioc->reply_queue_count);
+ else if (local_max_msix_vectors == 0)
+ goto try_ioapic;
+
+ if (ioc->msix_vector_count < ioc->cpu_count)
+ smp_affinity_enable = 0;
+
+ if (smp_affinity_enable)
+ irq_flags |= PCI_IRQ_AFFINITY;
+
+ r = pci_alloc_irq_vectors(ioc->pdev, 1, ioc->reply_queue_count,
+ irq_flags);
+ if (r < 0) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "pci_alloc_irq_vectors failed (r=%d) !!!\n",
+ ioc->name, r));
+ goto try_ioapic;
+ }
+
+ ioc->msix_enable = 1;
+ ioc->reply_queue_count = r;
+ for (i = 0; i < ioc->reply_queue_count; i++) {
+ r = _base_request_irq(ioc, i);
+ if (r) {
+ _base_free_irq(ioc);
+ _base_disable_msix(ioc);
+ goto try_ioapic;
+ }
+ }
+
+ return 0;
+
+/* failback to io_apic interrupt routing */
+ try_ioapic:
+
+ ioc->reply_queue_count = 1;
+ r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY);
+ if (r < 0) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "pci_alloc_irq_vector(legacy) failed (r=%d) !!!\n",
+ ioc->name, r));
+ } else
+ r = _base_request_irq(ioc, 0);
+
+ return r;
+}
+
+/**
+ * mpt3sas_base_unmap_resources - free controller resources
+ * @ioc: per adapter object
+ */
+static void
+mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct pci_dev *pdev = ioc->pdev;
+
+ dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
+ ioc->name, __func__));
+
+ _base_free_irq(ioc);
+ _base_disable_msix(ioc);
+
+ kfree(ioc->replyPostRegisterIndex);
+ ioc->replyPostRegisterIndex = NULL;
+
+
+ if (ioc->chip_phys) {
+ iounmap(ioc->chip);
+ ioc->chip_phys = 0;
+ }
+
+ if (pci_is_enabled(pdev)) {
+ pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ }
+}
+
+/**
+ * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct pci_dev *pdev = ioc->pdev;
+ u32 memap_sz;
+ u32 pio_sz;
+ int i, r = 0;
+ u64 pio_chip = 0;
+ phys_addr_t chip_phys = 0;
+ struct adapter_reply_queue *reply_q;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
+ ioc->name, __func__));
+
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev)) {
+ pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
+ ioc->name);
+ ioc->bars = 0;
+ return -ENODEV;
+ }
+
+
+ if (pci_request_selected_regions(pdev, ioc->bars,
+ ioc->driver_name)) {
+ pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
+ ioc->name);
+ ioc->bars = 0;
+ r = -ENODEV;
+ goto out_fail;
+ }
+
+/* AER (Advanced Error Reporting) hooks */
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+
+
+ if (_base_config_dma_addressing(ioc, pdev) != 0) {
+ pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ r = -ENODEV;
+ goto out_fail;
+ }
+
+ for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
+ (!memap_sz || !pio_sz); i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ if (pio_sz)
+ continue;
+ pio_chip = (u64)pci_resource_start(pdev, i);
+ pio_sz = pci_resource_len(pdev, i);
+ } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+ if (memap_sz)
+ continue;
+ ioc->chip_phys = pci_resource_start(pdev, i);
+ chip_phys = ioc->chip_phys;
+ memap_sz = pci_resource_len(pdev, i);
+ ioc->chip = ioremap(ioc->chip_phys, memap_sz);
+ }
+ }
+
+ if (ioc->chip == NULL) {
+ pr_err(MPT3SAS_FMT "unable to map adapter memory! "
+ " or resource not found\n", ioc->name);
+ r = -EINVAL;
+ goto out_fail;
+ }
+
+ _base_mask_interrupts(ioc);
+
+ r = _base_get_ioc_facts(ioc);
+ if (r)
+ goto out_fail;
+
+ if (!ioc->rdpq_array_enable_assigned) {
+ ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+ ioc->rdpq_array_enable_assigned = 1;
+ }
+
+ r = _base_enable_msix(ioc);
+ if (r)
+ goto out_fail;
+
+ /* Use the Combined reply queue feature only for SAS3 C0 & higher
+ * revision HBAs and also only when reply queue count is greater than 8
+ */
+ if (ioc->combined_reply_queue) {
+ /* Determine the Supplemental Reply Post Host Index Registers
+ * Addresse. Supplemental Reply Post Host Index Registers
+ * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
+ * each register is at offset bytes of
+ * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
+ */
+ ioc->replyPostRegisterIndex = kcalloc(
+ ioc->combined_reply_index_count,
+ sizeof(resource_size_t *), GFP_KERNEL);
+ if (!ioc->replyPostRegisterIndex) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "allocation for reply Post Register Index failed!!!\n",
+ ioc->name));
+ r = -ENOMEM;
+ goto out_fail;
+ }
+
+ for (i = 0; i < ioc->combined_reply_index_count; i++) {
+ ioc->replyPostRegisterIndex[i] = (resource_size_t *)
+ ((u8 __force *)&ioc->chip->Doorbell +
+ MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
+ (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
+ }
+ }
+
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
+ &ioc->chip->ReplyPostHostIndex;
+
+ for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+ ioc->reply_post_host_index[i] =
+ (resource_size_t __iomem *)
+ ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+ * 4)));
+ }
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
+ pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
+ reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
+ "IO-APIC enabled"),
+ pci_irq_vector(ioc->pdev, reply_q->msix_index));
+
+ pr_info(MPT3SAS_FMT "iomem(%pap), mapped(0x%p), size(%d)\n",
+ ioc->name, &chip_phys, ioc->chip, memap_sz);
+ pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
+ ioc->name, (unsigned long long)pio_chip, pio_sz);
+
+ /* Save PCI configuration state for recovery from PCI AER/EEH errors */
+ pci_save_state(pdev);
+ return 0;
+
+ out_fail:
+ mpt3sas_base_unmap_resources(ioc);
+ return r;
+}
+
+/**
+ * mpt3sas_base_get_msg_frame - obtain request mf pointer
+ * @ioc: per adapter object
+ * @smid: system request message index(smid zero is invalid)
+ *
+ * Return: virt pointer to message frame.
+ */
+void *
+mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->request + (smid * ioc->request_sz));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: virt pointer to sense buffer.
+ */
+void *
+mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: phys pointer to the low 32bit address of the sense buffer.
+ */
+__le32
+mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
+ SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl - obtain a PCIe SGL virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: virt pointer to a PCIe SGL.
+ */
+void *
+mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->pcie_sg_lookup[smid - 1].pcie_sgl);
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl_dma - obtain a PCIe SGL dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: phys pointer to the address of the PCIe buffer.
+ */
+dma_addr_t
+mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->pcie_sg_lookup[smid - 1].pcie_sgl_dma;
+}
+
+/**
+ * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
+ * @ioc: per adapter object
+ * @phys_addr: lower 32 physical addr of the reply
+ *
+ * Converts 32bit lower physical addr into a virt address.
+ */
+void *
+mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
+{
+ if (!phys_addr)
+ return NULL;
+ return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
+}
+
+static inline u8
+_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc)
+{
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
+}
+
+/**
+ * mpt3sas_base_get_smid - obtain a free smid from internal queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->internal_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ pr_err(MPT3SAS_FMT "%s: smid not available\n",
+ ioc->name, __func__);
+ return 0;
+ }
+
+ request = list_entry(ioc->internal_free_list.next,
+ struct request_tracker, tracker_list);
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+ struct scsi_cmnd *scmd)
+{
+ struct scsiio_tracker *request = scsi_cmd_priv(scmd);
+ unsigned int tag = scmd->request->tag;
+ u16 smid;
+
+ smid = tag + 1;
+ request->cb_idx = cb_idx;
+ request->msix_io = _base_get_msix_index(ioc);
+ request->smid = smid;
+ INIT_LIST_HEAD(&request->chain_list);
+ return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->hpr_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return 0;
+ }
+
+ request = list_entry(ioc->hpr_free_list.next,
+ struct request_tracker, tracker_list);
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+static void
+_base_recovery_check(struct MPT3SAS_ADAPTER *ioc)
+{
+ /*
+ * See _wait_for_commands_to_complete() call with regards to this code.
+ */
+ if (ioc->shost_recovery && ioc->pending_io_count) {
+ ioc->pending_io_count = scsi_host_busy(ioc->shost);
+ if (ioc->pending_io_count == 0)
+ wake_up(&ioc->reset_wq);
+ }
+}
+
+void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
+ struct scsiio_tracker *st)
+{
+ if (WARN_ON(st->smid == 0))
+ return;
+ st->cb_idx = 0xFF;
+ st->direct_io = 0;
+ atomic_set(&ioc->chain_lookup[st->smid - 1].chain_offset, 0);
+ st->smid = 0;
+}
+
+/**
+ * mpt3sas_base_free_smid - put smid back on free_list
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+void
+mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ unsigned long flags;
+ int i;
+
+ if (smid < ioc->hi_priority_smid) {
+ struct scsiio_tracker *st;
+
+ st = _get_st_from_smid(ioc, smid);
+ if (!st) {
+ _base_recovery_check(ioc);
+ return;
+ }
+ mpt3sas_base_clear_st(ioc, st);
+ _base_recovery_check(ioc);
+ return;
+ }
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (smid < ioc->internal_smid) {
+ /* hi-priority */
+ i = smid - ioc->hi_priority_smid;
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
+ } else if (smid <= ioc->hba_queue_depth) {
+ /* internal queue */
+ i = smid - ioc->internal_smid;
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ list_add(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
+
+/**
+ * _base_mpi_ep_writeq - 32 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * This special handling for MPI EP to take care of 32 bit
+ * environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+static inline void
+_base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr,
+ spinlock_t *writeq_lock)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(writeq_lock, flags);
+ __raw_writel((u32)(b), addr);
+ __raw_writel((u32)(b >> 32), (addr + 4));
+ mmiowb();
+ spin_unlock_irqrestore(writeq_lock, flags);
+}
+
+/**
+ * _base_writeq - 64 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
+ * care of 32 bit environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+#if defined(writeq) && defined(CONFIG_64BIT)
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+ __raw_writeq(b, addr);
+ mmiowb();
+}
+#else
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+ _base_mpi_ep_writeq(b, addr, writeq_lock);
+}
+#endif
+
+/**
+ * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+static void
+_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ mpi_req_iomem = (void __force *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+static void
+_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+
+ descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+void
+mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.SCSIIO.RequestFlags =
+ MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_hi_priority - send Task Management request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_task: msix_task will be same as msix of IO incase of task abort else 0.
+ */
+void
+mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u16 msix_task)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+
+ if (ioc->is_mcpu_endpoint) {
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* TBD 256 is offset within sys register. */
+ mpi_req_iomem = (void __force *)ioc->chip
+ + MPI_FRAME_START_OFFSET
+ + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+
+ request = (u64 *)&descriptor;
+
+ descriptor.HighPriority.RequestFlags =
+ MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
+ descriptor.HighPriority.MSIxIndex = msix_task;
+ descriptor.HighPriority.SMID = cpu_to_le16(smid);
+ descriptor.HighPriority.LMID = 0;
+ descriptor.HighPriority.Reserved1 = 0;
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_nvme_encap - send NVMe encapsulated request to
+ * firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+void
+mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.Default.RequestFlags =
+ MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.Default.SMID = cpu_to_le16(smid);
+ descriptor.Default.LMID = 0;
+ descriptor.Default.DescriptorTypeDependent = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_default - Default, primarily used for config pages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+void
+mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+
+ if (ioc->is_mcpu_endpoint) {
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ /* TBD 256 is offset within sys register */
+ mpi_req_iomem = (void __force *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+ request = (u64 *)&descriptor;
+ descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.Default.SMID = cpu_to_le16(smid);
+ descriptor.Default.LMID = 0;
+ descriptor.Default.DescriptorTypeDependent = 0;
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_display_OEMs_branding - Display branding string
+ * @ioc: per adapter object
+ */
+static void
+_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc)
+{
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
+ return;
+
+ switch (ioc->pdev->subsystem_vendor) {
+ case PCI_VENDOR_ID_INTEL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RMS2LL080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS2LL040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_SSD910_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_SSD910_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RS25GB008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RS25GB008_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_INTEL_RMS3JC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RMS3JC080_BRANDING);
+ break;
+
+ case MPT3SAS_INTEL_RS3GC008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3GC008_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3FC044_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3FC044_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3UC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3UC080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case PCI_VENDOR_ID_DELL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_BRANDING);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_DELL_12G_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_DELL_12G_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell HBA: Subsystem ID: 0x%X\n", ioc->name,
+ ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case PCI_VENDOR_ID_CISCO:
+ switch (ioc->pdev->device) {
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case MPI25_MFGPAGE_DEVID_SAS3108_1:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING
+ );
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case MPT2SAS_HP_3PAR_SSVID:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2004:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_INTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+/**
+ * _base_display_fwpkg_version - sends FWUpload request to pull FWPkg
+ * version from FW Image Header.
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+ static int
+_base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2FWImageHeader_t *FWImgHdr;
+ Mpi25FWUploadRequest_t *mpi_request;
+ Mpi2FWUploadReply_t mpi_reply;
+ int r = 0;
+ void *fwpkg_data = NULL;
+ dma_addr_t fwpkg_data_dma;
+ u16 smid, ioc_status;
+ size_t data_length;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ data_length = sizeof(Mpi2FWImageHeader_t);
+ fwpkg_data = pci_alloc_consistent(ioc->pdev, data_length,
+ &fwpkg_data_dma);
+ if (!fwpkg_data) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -ENOMEM;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ r = -EAGAIN;
+ goto out;
+ }
+
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi25FWUploadRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_FW_UPLOAD;
+ mpi_request->ImageType = MPI2_FW_UPLOAD_ITYPE_FW_FLASH;
+ mpi_request->ImageSize = cpu_to_le32(data_length);
+ ioc->build_sg(ioc, &mpi_request->SGL, 0, 0, fwpkg_data_dma,
+ data_length);
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ /* Wait for 15 seconds */
+ wait_for_completion_timeout(&ioc->base_cmds.done,
+ FW_IMG_HDR_READ_TIMEOUT*HZ);
+ pr_info(MPT3SAS_FMT "%s: complete\n",
+ ioc->name, __func__);
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi25FWUploadRequest_t)/4);
+ r = -ETIME;
+ } else {
+ memset(&mpi_reply, 0, sizeof(Mpi2FWUploadReply_t));
+ if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) {
+ memcpy(&mpi_reply, ioc->base_cmds.reply,
+ sizeof(Mpi2FWUploadReply_t));
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ FWImgHdr = (Mpi2FWImageHeader_t *)fwpkg_data;
+ if (FWImgHdr->PackageVersion.Word) {
+ pr_info(MPT3SAS_FMT "FW Package Version"
+ "(%02d.%02d.%02d.%02d)\n",
+ ioc->name,
+ FWImgHdr->PackageVersion.Struct.Major,
+ FWImgHdr->PackageVersion.Struct.Minor,
+ FWImgHdr->PackageVersion.Struct.Unit,
+ FWImgHdr->PackageVersion.Struct.Dev);
+ }
+ } else {
+ _debug_dump_mf(&mpi_reply,
+ sizeof(Mpi2FWUploadReply_t)/4);
+ }
+ }
+ }
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+out:
+ if (fwpkg_data)
+ pci_free_consistent(ioc->pdev, data_length, fwpkg_data,
+ fwpkg_data_dma);
+ return r;
+}
+
+/**
+ * _base_display_ioc_capabilities - Disply IOC's capabilities.
+ * @ioc: per adapter object
+ */
+static void
+_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
+{
+ int i = 0;
+ char desc[16];
+ u32 iounit_pg1_flags;
+ u32 bios_version;
+
+ bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+ strncpy(desc, ioc->manu_pg0.ChipName, 16);
+ pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\
+ "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
+ ioc->name, desc,
+ (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+ (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+ (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+ ioc->facts.FWVersion.Word & 0x000000FF,
+ ioc->pdev->revision,
+ (bios_version & 0xFF000000) >> 24,
+ (bios_version & 0x00FF0000) >> 16,
+ (bios_version & 0x0000FF00) >> 8,
+ bios_version & 0x000000FF);
+
+ _base_display_OEMs_branding(ioc);
+
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ pr_info("%sNVMe", i ? "," : "");
+ i++;
+ }
+
+ pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
+
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
+ pr_info("Initiator");
+ i++;
+ }
+
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
+ pr_info("%sTarget", i ? "," : "");
+ i++;
+ }
+
+ i = 0;
+ pr_info("), ");
+ pr_info("Capabilities=(");
+
+ if (!ioc->hide_ir_msg) {
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+ pr_info("Raid");
+ i++;
+ }
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
+ pr_info("%sTLR", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
+ pr_info("%sMulticast", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
+ pr_info("%sBIDI Target", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
+ pr_info("%sEEDP", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
+ pr_info("%sSnapshot Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
+ pr_info("%sDiag Trace Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
+ pr_info("%sDiag Extended Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
+ pr_info("%sTask Set Full", i ? "," : "");
+ i++;
+ }
+
+ iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+ if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
+ pr_info("%sNCQ", i ? "," : "");
+ i++;
+ }
+
+ pr_info(")\n");
+}
+
+/**
+ * mpt3sas_base_update_missing_delay - change the missing delay timers
+ * @ioc: per adapter object
+ * @device_missing_delay: amount of time till device is reported missing
+ * @io_missing_delay: interval IO is returned when there is a missing device
+ *
+ * Passed on the command line, this function will modify the device missing
+ * delay, as well as the io missing delay. This should be called at driver
+ * load time.
+ */
+void
+mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+ u16 device_missing_delay, u8 io_missing_delay)
+{
+ u16 dmd, dmd_new, dmd_orignal;
+ u8 io_missing_delay_original;
+ u16 sz;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2ConfigReply_t mpi_reply;
+ u8 num_phys = 0;
+ u16 ioc_status;
+
+ mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+ if (!num_phys)
+ return;
+
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ /* device missing delay */
+ dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
+ if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+ dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+ else
+ dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+ dmd_orignal = dmd;
+ if (device_missing_delay > 0x7F) {
+ dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
+ device_missing_delay;
+ dmd = dmd / 16;
+ dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
+ } else
+ dmd = device_missing_delay;
+ sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
+
+ /* io missing delay */
+ io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
+ sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
+
+ if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+ sz)) {
+ if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+ dmd_new = (dmd &
+ MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+ else
+ dmd_new =
+ dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+ pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n",
+ ioc->name, dmd_orignal, dmd_new);
+ pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n",
+ ioc->name, io_missing_delay_original,
+ io_missing_delay);
+ ioc->device_missing_delay = dmd_new;
+ ioc->io_missing_delay = io_missing_delay;
+ }
+
+out:
+ kfree(sas_iounit_pg1);
+}
+
+/**
+ * _base_static_config_pages - static start of day config pages
+ * @ioc: per adapter object
+ */
+static void
+_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ u32 iounit_pg1_flags;
+
+ ioc->nvme_abort_timeout = 30;
+ mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
+ if (ioc->ir_firmware)
+ mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
+ &ioc->manu_pg10);
+
+ /*
+ * Ensure correct T10 PI operation if vendor left EEDPTagMode
+ * flag unset in NVDATA.
+ */
+ mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
+ if (ioc->manu_pg11.EEDPTagMode == 0) {
+ pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
+ ioc->name);
+ ioc->manu_pg11.EEDPTagMode &= ~0x3;
+ ioc->manu_pg11.EEDPTagMode |= 0x1;
+ mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
+ &ioc->manu_pg11);
+ }
+ if (ioc->manu_pg11.AddlFlags2 & NVME_TASK_MNGT_CUSTOM_MASK)
+ ioc->tm_custom_handling = 1;
+ else {
+ ioc->tm_custom_handling = 0;
+ if (ioc->manu_pg11.NVMeAbortTO < NVME_TASK_ABORT_MIN_TIMEOUT)
+ ioc->nvme_abort_timeout = NVME_TASK_ABORT_MIN_TIMEOUT;
+ else if (ioc->manu_pg11.NVMeAbortTO >
+ NVME_TASK_ABORT_MAX_TIMEOUT)
+ ioc->nvme_abort_timeout = NVME_TASK_ABORT_MAX_TIMEOUT;
+ else
+ ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO;
+ }
+
+ mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
+ mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
+ mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
+ mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
+ mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
+ _base_display_ioc_capabilities(ioc);
+
+ /*
+ * Enable task_set_full handling in iounit_pg1 when the
+ * facts capabilities indicate that its supported.
+ */
+ iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+ if ((ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
+ iounit_pg1_flags &=
+ ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+ else
+ iounit_pg1_flags |=
+ MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+ ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
+ mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
+}
+
+/**
+ * mpt3sas_free_enclosure_list - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated during encloure add.
+ */
+void
+mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct _enclosure_node *enclosure_dev, *enclosure_dev_next;
+
+ /* Free enclosure list */
+ list_for_each_entry_safe(enclosure_dev,
+ enclosure_dev_next, &ioc->enclosure_list, list) {
+ list_del(&enclosure_dev->list);
+ kfree(enclosure_dev);
+ }
+}
+
+/**
+ * _base_release_memory_pools - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated from _base_allocate_memory_pools.
+ */
+static void
+_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+ int i = 0;
+ int j = 0;
+ struct chain_tracker *ct;
+ struct reply_post_struct *rps;
+
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->request) {
+ pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
+ ioc->request, ioc->request_dma);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request_pool(0x%p): free\n",
+ ioc->name, ioc->request));
+ ioc->request = NULL;
+ }
+
+ if (ioc->sense) {
+ dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+ dma_pool_destroy(ioc->sense_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "sense_pool(0x%p): free\n",
+ ioc->name, ioc->sense));
+ ioc->sense = NULL;
+ }
+
+ if (ioc->reply) {
+ dma_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
+ dma_pool_destroy(ioc->reply_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_pool(0x%p): free\n",
+ ioc->name, ioc->reply));
+ ioc->reply = NULL;
+ }
+
+ if (ioc->reply_free) {
+ dma_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
+ ioc->reply_free_dma);
+ dma_pool_destroy(ioc->reply_free_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_free_pool(0x%p): free\n",
+ ioc->name, ioc->reply_free));
+ ioc->reply_free = NULL;
+ }
+
+ if (ioc->reply_post) {
+ do {
+ rps = &ioc->reply_post[i];
+ if (rps->reply_post_free) {
+ dma_pool_free(
+ ioc->reply_post_free_dma_pool,
+ rps->reply_post_free,
+ rps->reply_post_free_dma);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_post_free_pool(0x%p): free\n",
+ ioc->name, rps->reply_post_free));
+ rps->reply_post_free = NULL;
+ }
+ } while (ioc->rdpq_array_enable &&
+ (++i < ioc->reply_queue_count));
+ if (ioc->reply_post_free_array &&
+ ioc->rdpq_array_enable) {
+ dma_pool_free(ioc->reply_post_free_array_dma_pool,
+ ioc->reply_post_free_array,
+ ioc->reply_post_free_array_dma);
+ ioc->reply_post_free_array = NULL;
+ }
+ dma_pool_destroy(ioc->reply_post_free_array_dma_pool);
+ dma_pool_destroy(ioc->reply_post_free_dma_pool);
+ kfree(ioc->reply_post);
+ }
+
+ if (ioc->pcie_sgl_dma_pool) {
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ dma_pool_free(ioc->pcie_sgl_dma_pool,
+ ioc->pcie_sg_lookup[i].pcie_sgl,
+ ioc->pcie_sg_lookup[i].pcie_sgl_dma);
+ }
+ if (ioc->pcie_sgl_dma_pool)
+ dma_pool_destroy(ioc->pcie_sgl_dma_pool);
+ }
+
+ if (ioc->config_page) {
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "config_page(0x%p): free\n", ioc->name,
+ ioc->config_page));
+ pci_free_consistent(ioc->pdev, ioc->config_page_sz,
+ ioc->config_page, ioc->config_page_dma);
+ }
+
+ kfree(ioc->hpr_lookup);
+ kfree(ioc->internal_lookup);
+ if (ioc->chain_lookup) {
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ for (j = ioc->chains_per_prp_buffer;
+ j < ioc->chains_needed_per_io; j++) {
+ ct = &ioc->chain_lookup[i].chains_per_smid[j];
+ if (ct && ct->chain_buffer)
+ dma_pool_free(ioc->chain_dma_pool,
+ ct->chain_buffer,
+ ct->chain_buffer_dma);
+ }
+ kfree(ioc->chain_lookup[i].chains_per_smid);
+ }
+ dma_pool_destroy(ioc->chain_dma_pool);
+ kfree(ioc->chain_lookup);
+ ioc->chain_lookup = NULL;
+ }
+}
+
+/**
+ * is_MSB_are_same - checks whether all reply queues in a set are
+ * having same upper 32bits in their base memory address.
+ * @reply_pool_start_address: Base address of a reply queue set
+ * @pool_sz: Size of single Reply Descriptor Post Queues pool size
+ *
+ * Return: 1 if reply queues in a set have a same upper 32bits in their base
+ * memory address, else 0.
+ */
+
+static int
+is_MSB_are_same(long reply_pool_start_address, u32 pool_sz)
+{
+ long reply_pool_end_address;
+
+ reply_pool_end_address = reply_pool_start_address + pool_sz;
+
+ if (upper_32_bits(reply_pool_start_address) ==
+ upper_32_bits(reply_pool_end_address))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * _base_allocate_memory_pools - allocate start of day memory pools
+ * @ioc: per adapter object
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct mpt3sas_facts *facts;
+ u16 max_sge_elements;
+ u16 chains_needed_per_io;
+ u32 sz, total_sz, reply_post_free_sz, reply_post_free_array_sz;
+ u32 retry_sz;
+ u16 max_request_credit, nvme_blocks_needed;
+ unsigned short sg_tablesize;
+ u16 sge_size;
+ int i, j;
+ struct chain_tracker *ct;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+
+ retry_sz = 0;
+ facts = &ioc->facts;
+
+ /* command line tunables for max sgl entries */
+ if (max_sgl_entries != -1)
+ sg_tablesize = max_sgl_entries;
+ else {
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ sg_tablesize = MPT2SAS_SG_DEPTH;
+ else
+ sg_tablesize = MPT3SAS_SG_DEPTH;
+ }
+
+ /* max sgl entries <= MPT_KDUMP_MIN_PHYS_SEGMENTS in KDUMP mode */
+ if (reset_devices)
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ MPT_KDUMP_MIN_PHYS_SEGMENTS);
+
+ if (ioc->is_mcpu_endpoint)
+ ioc->shost->sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else {
+ if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+ sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ SG_MAX_SEGMENTS);
+ pr_warn(MPT3SAS_FMT
+ "sg_tablesize(%u) is bigger than kernel "
+ "defined SG_CHUNK_SIZE(%u)\n", ioc->name,
+ sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
+ }
+ ioc->shost->sg_tablesize = sg_tablesize;
+ }
+
+ ioc->internal_depth = min_t(int, (facts->HighPriorityCredit + (5)),
+ (facts->RequestCredit / 4));
+ if (ioc->internal_depth < INTERNAL_CMDS_COUNT) {
+ if (facts->RequestCredit <= (INTERNAL_CMDS_COUNT +
+ INTERNAL_SCSIIO_CMDS_COUNT)) {
+ pr_err(MPT3SAS_FMT "IOC doesn't have enough Request \
+ Credits, it has just %d number of credits\n",
+ ioc->name, facts->RequestCredit);
+ return -ENOMEM;
+ }
+ ioc->internal_depth = 10;
+ }
+
+ ioc->hi_priority_depth = ioc->internal_depth - (5);
+ /* command line tunables for max controller queue depth */
+ if (max_queue_depth != -1 && max_queue_depth != 0) {
+ max_request_credit = min_t(u16, max_queue_depth +
+ ioc->internal_depth, facts->RequestCredit);
+ if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+ max_request_credit = MAX_HBA_QUEUE_DEPTH;
+ } else if (reset_devices)
+ max_request_credit = min_t(u16, facts->RequestCredit,
+ (MPT3SAS_KDUMP_SCSI_IO_DEPTH + ioc->internal_depth));
+ else
+ max_request_credit = min_t(u16, facts->RequestCredit,
+ MAX_HBA_QUEUE_DEPTH);
+
+ /* Firmware maintains additional facts->HighPriorityCredit number of
+ * credits for HiPriprity Request messages, so hba queue depth will be
+ * sum of max_request_credit and high priority queue depth.
+ */
+ ioc->hba_queue_depth = max_request_credit + ioc->hi_priority_depth;
+
+ /* request frame size */
+ ioc->request_sz = facts->IOCRequestFrameSize * 4;
+
+ /* reply frame size */
+ ioc->reply_sz = facts->ReplyFrameSize * 4;
+
+ /* chain segment size */
+ if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+ if (facts->IOCMaxChainSegmentSize)
+ ioc->chain_segment_sz =
+ facts->IOCMaxChainSegmentSize *
+ MAX_CHAIN_ELEMT_SZ;
+ else
+ /* set to 128 bytes size if IOCMaxChainSegmentSize is zero */
+ ioc->chain_segment_sz = DEFAULT_NUM_FWCHAIN_ELEMTS *
+ MAX_CHAIN_ELEMT_SZ;
+ } else
+ ioc->chain_segment_sz = ioc->request_sz;
+
+ /* calculate the max scatter element size */
+ sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
+
+ retry_allocation:
+ total_sz = 0;
+ /* calculate number of sg elements left over in the 1st frame */
+ max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
+ sizeof(Mpi2SGEIOUnion_t)) + sge_size);
+ ioc->max_sges_in_main_message = max_sge_elements/sge_size;
+
+ /* now do the same for a chain buffer */
+ max_sge_elements = ioc->chain_segment_sz - sge_size;
+ ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
+
+ /*
+ * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
+ */
+ chains_needed_per_io = ((ioc->shost->sg_tablesize -
+ ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
+ + 1;
+ if (chains_needed_per_io > facts->MaxChainDepth) {
+ chains_needed_per_io = facts->MaxChainDepth;
+ ioc->shost->sg_tablesize = min_t(u16,
+ ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
+ * chains_needed_per_io), ioc->shost->sg_tablesize);
+ }
+ ioc->chains_needed_per_io = chains_needed_per_io;
+
+ /* reply free queue sizing - taking into account for 64 FW events */
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+
+ /* mCPU manage single counters for simplicity */
+ if (ioc->is_mcpu_endpoint)
+ ioc->reply_post_queue_depth = ioc->reply_free_queue_depth;
+ else {
+ /* calculate reply descriptor post queue depth */
+ ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+ ioc->reply_free_queue_depth + 1;
+ /* align the reply post queue on the next 16 count boundary */
+ if (ioc->reply_post_queue_depth % 16)
+ ioc->reply_post_queue_depth += 16 -
+ (ioc->reply_post_queue_depth % 16);
+ }
+
+ if (ioc->reply_post_queue_depth >
+ facts->MaxReplyDescriptorPostQueueDepth) {
+ ioc->reply_post_queue_depth =
+ facts->MaxReplyDescriptorPostQueueDepth -
+ (facts->MaxReplyDescriptorPostQueueDepth % 16);
+ ioc->hba_queue_depth =
+ ((ioc->reply_post_queue_depth - 64) / 2) - 1;
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \
+ "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
+ "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
+ ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
+ ioc->chains_needed_per_io));
+
+ /* reply post queue, 16 byte align */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+
+ sz = reply_post_free_sz;
+ if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
+ sz *= ioc->reply_queue_count;
+
+ ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
+ (ioc->reply_queue_count):1,
+ sizeof(struct reply_post_struct), GFP_KERNEL);
+
+ if (!ioc->reply_post) {
+ pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_post_free_dma_pool = dma_pool_create("reply_post_free pool",
+ &ioc->pdev->dev, sz, 16, 0);
+ if (!ioc->reply_post_free_dma_pool) {
+ pr_err(MPT3SAS_FMT
+ "reply_post_free pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ i = 0;
+ do {
+ ioc->reply_post[i].reply_post_free =
+ dma_pool_alloc(ioc->reply_post_free_dma_pool,
+ GFP_KERNEL,
+ &ioc->reply_post[i].reply_post_free_dma);
+ if (!ioc->reply_post[i].reply_post_free) {
+ pr_err(MPT3SAS_FMT
+ "reply_post_free pool: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_post[i].reply_post_free, 0, sz);
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply post free pool (0x%p): depth(%d),"
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_post[i].reply_post_free,
+ ioc->reply_post_queue_depth, 8, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_post_free_dma = (0x%llx)\n", ioc->name,
+ (unsigned long long)
+ ioc->reply_post[i].reply_post_free_dma));
+ total_sz += sz;
+ } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
+
+ if (ioc->dma_mask == 64) {
+ if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
+ pr_warn(MPT3SAS_FMT
+ "no suitable consistent DMA mask for %s\n",
+ ioc->name, pci_name(ioc->pdev));
+ goto out;
+ }
+ }
+
+ ioc->scsiio_depth = ioc->hba_queue_depth -
+ ioc->hi_priority_depth - ioc->internal_depth;
+
+ /* set the scsi host can_queue depth
+ * with some internal commands that could be outstanding
+ */
+ ioc->shost->can_queue = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "scsi host: can_queue depth (%d)\n",
+ ioc->name, ioc->shost->can_queue));
+
+
+ /* contiguous pool for request and chains, 16 byte align, one extra "
+ * "frame for smid=0
+ */
+ ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+ sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
+
+ /* hi-priority queue */
+ sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+ /* internal queue */
+ sz += (ioc->internal_depth * ioc->request_sz);
+
+ ioc->request_dma_sz = sz;
+ ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
+ if (!ioc->request) {
+ pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+ "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
+ ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+ if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
+ goto out;
+ retry_sz = 64;
+ ioc->hba_queue_depth -= retry_sz;
+ _base_release_memory_pools(ioc);
+ goto retry_allocation;
+ }
+
+ if (retry_sz)
+ pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+ "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
+ ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+
+ /* hi-priority queue */
+ ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+ ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+
+ /* internal queue */
+ ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+ ioc->request_sz);
+ ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+ ioc->request_sz);
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz,
+ (ioc->hba_queue_depth * ioc->request_sz)/1024));
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n",
+ ioc->name, (unsigned long long) ioc->request_dma));
+ total_sz += sz;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n",
+ ioc->name, ioc->request, ioc->scsiio_depth));
+
+ ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
+ sz = ioc->scsiio_depth * sizeof(struct chain_lookup);
+ ioc->chain_lookup = kzalloc(sz, GFP_KERNEL);
+ if (!ioc->chain_lookup) {
+ pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages "
+ "failed\n", ioc->name);
+ goto out;
+ }
+
+ sz = ioc->chains_needed_per_io * sizeof(struct chain_tracker);
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ ioc->chain_lookup[i].chains_per_smid = kzalloc(sz, GFP_KERNEL);
+ if (!ioc->chain_lookup[i].chains_per_smid) {
+ pr_err(MPT3SAS_FMT "chain_lookup: "
+ " kzalloc failed\n", ioc->name);
+ goto out;
+ }
+ }
+
+ /* initialize hi-priority queue smid's */
+ ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->hpr_lookup) {
+ pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "hi_priority(0x%p): depth(%d), start smid(%d)\n",
+ ioc->name, ioc->hi_priority,
+ ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+ /* initialize internal queue smid's */
+ ioc->internal_lookup = kcalloc(ioc->internal_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->internal_lookup) {
+ pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "internal(0x%p): depth(%d), start smid(%d)\n",
+ ioc->name, ioc->internal,
+ ioc->internal_depth, ioc->internal_smid));
+ /*
+ * The number of NVMe page sized blocks needed is:
+ * (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1
+ * ((sg_tablesize * 8) - 1) is the max PRP's minus the first PRP entry
+ * that is placed in the main message frame. 8 is the size of each PRP
+ * entry or PRP list pointer entry. 8 is subtracted from page_size
+ * because of the PRP list pointer entry at the end of a page, so this
+ * is not counted as a PRP entry. The 1 added page is a round up.
+ *
+ * To avoid allocation failures due to the amount of memory that could
+ * be required for NVMe PRP's, only each set of NVMe blocks will be
+ * contiguous, so a new set is allocated for each possible I/O.
+ */
+ ioc->chains_per_prp_buffer = 0;
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ nvme_blocks_needed =
+ (ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1;
+ nvme_blocks_needed /= (ioc->page_size - NVME_PRP_SIZE);
+ nvme_blocks_needed++;
+
+ sz = sizeof(struct pcie_sg_list) * ioc->scsiio_depth;
+ ioc->pcie_sg_lookup = kzalloc(sz, GFP_KERNEL);
+ if (!ioc->pcie_sg_lookup) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL lookup: kzalloc failed\n", ioc->name);
+ goto out;
+ }
+ sz = nvme_blocks_needed * ioc->page_size;
+ ioc->pcie_sgl_dma_pool =
+ dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, 16, 0);
+ if (!ioc->pcie_sgl_dma_pool) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+
+ ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz;
+ ioc->chains_per_prp_buffer = min(ioc->chains_per_prp_buffer,
+ ioc->chains_needed_per_io);
+
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ ioc->pcie_sg_lookup[i].pcie_sgl = dma_pool_alloc(
+ ioc->pcie_sgl_dma_pool, GFP_KERNEL,
+ &ioc->pcie_sg_lookup[i].pcie_sgl_dma);
+ if (!ioc->pcie_sg_lookup[i].pcie_sgl) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (j = 0; j < ioc->chains_per_prp_buffer; j++) {
+ ct = &ioc->chain_lookup[i].chains_per_smid[j];
+ ct->chain_buffer =
+ ioc->pcie_sg_lookup[i].pcie_sgl +
+ (j * ioc->chain_segment_sz);
+ ct->chain_buffer_dma =
+ ioc->pcie_sg_lookup[i].pcie_sgl_dma +
+ (j * ioc->chain_segment_sz);
+ }
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "PCIe sgl pool depth(%d), "
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "Number of chains can "
+ "fit in a PRP page(%d)\n", ioc->name,
+ ioc->chains_per_prp_buffer));
+ total_sz += sz * ioc->scsiio_depth;
+ }
+
+ ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev,
+ ioc->chain_segment_sz, 16, 0);
+ if (!ioc->chain_dma_pool) {
+ pr_err(MPT3SAS_FMT "chain_dma_pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ for (j = ioc->chains_per_prp_buffer;
+ j < ioc->chains_needed_per_io; j++) {
+ ct = &ioc->chain_lookup[i].chains_per_smid[j];
+ ct->chain_buffer = dma_pool_alloc(
+ ioc->chain_dma_pool, GFP_KERNEL,
+ &ct->chain_buffer_dma);
+ if (!ct->chain_buffer) {
+ pr_err(MPT3SAS_FMT "chain_lookup: "
+ " pci_pool_alloc failed\n", ioc->name);
+ _base_release_memory_pools(ioc);
+ goto out;
+ }
+ }
+ total_sz += ioc->chain_segment_sz;
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->chain_depth, ioc->chain_segment_sz,
+ ((ioc->chain_depth * ioc->chain_segment_sz))/1024));
+
+ /* sense buffers, 4 byte align */
+ sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
+ ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz,
+ 4, 0);
+ if (!ioc->sense_dma_pool) {
+ pr_err(MPT3SAS_FMT "sense pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL,
+ &ioc->sense_dma);
+ if (!ioc->sense) {
+ pr_err(MPT3SAS_FMT "sense pool: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ /* sense buffer requires to be in same 4 gb region.
+ * Below function will check the same.
+ * In case of failure, new pci pool will be created with updated
+ * alignment. Older allocation and pool will be destroyed.
+ * Alignment will be used such a way that next allocation if
+ * success, will always meet same 4gb region requirement.
+ * Actual requirement is not alignment, but we need start and end of
+ * DMA address must have same upper 32 bit address.
+ */
+ if (!is_MSB_are_same((long)ioc->sense, sz)) {
+ //Release Sense pool & Reallocate
+ dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+ dma_pool_destroy(ioc->sense_dma_pool);
+ ioc->sense = NULL;
+
+ ioc->sense_dma_pool =
+ dma_pool_create("sense pool", &ioc->pdev->dev, sz,
+ roundup_pow_of_two(sz), 0);
+ if (!ioc->sense_dma_pool) {
+ pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL,
+ &ioc->sense_dma);
+ if (!ioc->sense) {
+ pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
+ "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
+ SCSI_SENSE_BUFFERSIZE, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->sense_dma));
+ total_sz += sz;
+
+ /* reply pool, 4 byte align */
+ sz = ioc->reply_free_queue_depth * ioc->reply_sz;
+ ioc->reply_dma_pool = dma_pool_create("reply pool", &ioc->pdev->dev, sz,
+ 4, 0);
+ if (!ioc->reply_dma_pool) {
+ pr_err(MPT3SAS_FMT "reply pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL,
+ &ioc->reply_dma);
+ if (!ioc->reply) {
+ pr_err(MPT3SAS_FMT "reply pool: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
+ ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->reply,
+ ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->reply_dma));
+ total_sz += sz;
+
+ /* reply free queue, 16 byte align */
+ sz = ioc->reply_free_queue_depth * 4;
+ ioc->reply_free_dma_pool = dma_pool_create("reply_free pool",
+ &ioc->pdev->dev, sz, 16, 0);
+ if (!ioc->reply_free_dma_pool) {
+ pr_err(MPT3SAS_FMT "reply_free pool: dma_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_free = dma_pool_alloc(ioc->reply_free_dma_pool, GFP_KERNEL,
+ &ioc->reply_free_dma);
+ if (!ioc->reply_free) {
+ pr_err(MPT3SAS_FMT "reply_free pool: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_free, 0, sz);
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \
+ "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_free_dma (0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->reply_free_dma));
+ total_sz += sz;
+
+ if (ioc->rdpq_array_enable) {
+ reply_post_free_array_sz = ioc->reply_queue_count *
+ sizeof(Mpi2IOCInitRDPQArrayEntry);
+ ioc->reply_post_free_array_dma_pool =
+ dma_pool_create("reply_post_free_array pool",
+ &ioc->pdev->dev, reply_post_free_array_sz, 16, 0);
+ if (!ioc->reply_post_free_array_dma_pool) {
+ dinitprintk(ioc,
+ pr_info(MPT3SAS_FMT "reply_post_free_array pool: "
+ "dma_pool_create failed\n", ioc->name));
+ goto out;
+ }
+ ioc->reply_post_free_array =
+ dma_pool_alloc(ioc->reply_post_free_array_dma_pool,
+ GFP_KERNEL, &ioc->reply_post_free_array_dma);
+ if (!ioc->reply_post_free_array) {
+ dinitprintk(ioc,
+ pr_info(MPT3SAS_FMT "reply_post_free_array pool: "
+ "dma_pool_alloc failed\n", ioc->name));
+ goto out;
+ }
+ }
+ ioc->config_page_sz = 512;
+ ioc->config_page = pci_alloc_consistent(ioc->pdev,
+ ioc->config_page_sz, &ioc->config_page_dma);
+ if (!ioc->config_page) {
+ pr_err(MPT3SAS_FMT
+ "config page: dma_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "config page(0x%p): size(%d)\n",
+ ioc->name, ioc->config_page, ioc->config_page_sz));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->config_page_dma));
+ total_sz += ioc->config_page_sz;
+
+ pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n",
+ ioc->name, total_sz/1024);
+ pr_info(MPT3SAS_FMT
+ "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
+ ioc->name, ioc->shost->can_queue, facts->RequestCredit);
+ pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n",
+ ioc->name, ioc->shost->sg_tablesize);
+ return 0;
+
+ out:
+ return -ENOMEM;
+}
+
+/**
+ * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Return: all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
+{
+ u32 s, sc;
+
+ s = readl(&ioc->chip->Doorbell);
+ sc = s & MPI2_IOC_STATE_MASK;
+ return cooked ? sc : s;
+}
+
+/**
+ * _base_wait_on_iocstate - waiting on a particular ioc state
+ * @ioc: ?
+ * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout)
+{
+ u32 count, cntdn;
+ u32 current_state;
+
+ count = 0;
+ cntdn = 1000 * timeout;
+ do {
+ current_state = mpt3sas_base_get_iocstate(ioc, 1);
+ if (current_state == ioc_state)
+ return 0;
+ if (count && current_state == MPI2_IOC_STATE_FAULT)
+ break;
+
+ usleep_range(1000, 1500);
+ count++;
+ } while (--cntdn);
+
+ return current_state;
+}
+
+/**
+ * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
+ * a write to the doorbell)
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
+
+static int
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+ u32 cntdn, count;
+ u32 int_status;
+
+ count = 0;
+ cntdn = 1000 * timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+
+ usleep_range(1000, 1500);
+ count++;
+ } while (--cntdn);
+
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+static int
+_base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+ u32 cntdn, count;
+ u32 int_status;
+
+ count = 0;
+ cntdn = 2000 * timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+
+}
+
+/**
+ * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
+ * doorbell.
+ */
+static int
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+ u32 cntdn, count;
+ u32 int_status;
+ u32 doorbell;
+
+ count = 0;
+ cntdn = 1000 * timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) ==
+ MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc , doorbell);
+ return -EFAULT;
+ }
+ } else if (int_status == 0xFFFFFFFF)
+ goto out;
+
+ usleep_range(1000, 1500);
+ count++;
+ } while (--cntdn);
+
+ out:
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+ u32 cntdn, count;
+ u32 doorbell_reg;
+
+ count = 0;
+ cntdn = 1000 * timeout;
+ do {
+ doorbell_reg = readl(&ioc->chip->Doorbell);
+ if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+
+ usleep_range(1000, 1500);
+ count++;
+ } while (--cntdn);
+
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
+ ioc->name, __func__, count, doorbell_reg);
+ return -EFAULT;
+}
+
+/**
+ * _base_send_ioc_reset - send doorbell reset
+ * @ioc: per adapter object
+ * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout)
+{
+ u32 ioc_state;
+ int r = 0;
+
+ if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
+ pr_err(MPT3SAS_FMT "%s: unknown reset_type\n",
+ ioc->name, __func__);
+ return -EFAULT;
+ }
+
+ if (!(ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
+ return -EFAULT;
+
+ pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name);
+
+ writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
+ &ioc->chip->Doorbell);
+ if ((_base_wait_for_doorbell_ack(ioc, 15))) {
+ r = -EFAULT;
+ goto out;
+ }
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
+ if (ioc_state) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ r = -EFAULT;
+ goto out;
+ }
+ out:
+ pr_info(MPT3SAS_FMT "message unit reset: %s\n",
+ ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+ return r;
+}
+
+/**
+ * _base_handshake_req_reply_wait - send request thru doorbell interface
+ * @ioc: per adapter object
+ * @request_bytes: request length
+ * @request: pointer having request payload
+ * @reply_bytes: reply length
+ * @reply: pointer to reply payload
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
+ u32 *request, int reply_bytes, u16 *reply, int timeout)
+{
+ MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
+ int i;
+ u8 failed;
+ __le32 *mfp;
+
+ /* make sure doorbell is not in use */
+ if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+ pr_err(MPT3SAS_FMT
+ "doorbell is in use (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* clear pending doorbell interrupts from previous state changes */
+ if (readl(&ioc->chip->HostInterruptStatus) &
+ MPI2_HIS_IOC2SYS_DB_STATUS)
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ /* send message to ioc */
+ writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
+ ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
+ &ioc->chip->Doorbell);
+
+ if ((_base_spin_on_doorbell_int(ioc, 5))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if ((_base_wait_for_doorbell_ack(ioc, 5))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake ack failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* send message 32-bits at a time */
+ for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
+ writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
+ if ((_base_wait_for_doorbell_ack(ioc, 5)))
+ failed = 1;
+ }
+
+ if (failed) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake sending request failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* now wait for the reply */
+ if ((_base_wait_for_doorbell_int(ioc, timeout))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* read the first two 16-bits, it gives the total length of the reply */
+ reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ if ((_base_wait_for_doorbell_int(ioc, 5))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ for (i = 2; i < default_reply->MsgLength * 2; i++) {
+ if ((_base_wait_for_doorbell_int(ioc, 5))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ if (i >= reply_bytes/2) /* overflow case */
+ readl(&ioc->chip->Doorbell);
+ else
+ reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ }
+
+ _base_wait_for_doorbell_int(ioc, 5);
+ if (_base_wait_for_doorbell_not_used(ioc, 5) != 0) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "doorbell is in use (line=%d)\n", ioc->name, __LINE__));
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if (ioc->logging_level & MPT_DEBUG_INIT) {
+ mfp = (__le32 *)reply;
+ pr_info("\toffset:data\n");
+ for (i = 0; i < reply_bytes/4; i++)
+ pr_info("\t[0x%02x]:%08x\n", i*4,
+ le32_to_cpu(mfp[i]));
+ }
+ return 0;
+}
+
+/**
+ * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SAS IO Unit Control Request message allows the host to perform low-level
+ * operations, such as resets on the PHYs of the IO Unit, also allows the host
+ * to obtain the IOC assigned device handles for a device if it has other
+ * identifying information about the device, in addition allows the host to
+ * remove IOC resources associated with the device.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2SasIoUnitControlReply_t *mpi_reply,
+ Mpi2SasIoUnitControlRequest_t *mpi_request)
+{
+ u16 smid;
+ u32 ioc_state;
+ u8 issue_reset = 0;
+ int rc;
+ void *request;
+ u16 wait_state_count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mutex_lock(&ioc->base_cmds.mutex);
+
+ if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+ pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ wait_state_count = 0;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ if (wait_state_count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to ioc not operational\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+ ssleep(1);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ pr_info(MPT3SAS_FMT
+ "%s: waiting for operational state(count=%d)\n",
+ ioc->name, __func__, wait_state_count);
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
+ if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+ mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
+ ioc->ioc_link_reset_in_progress = 1;
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->base_cmds.done,
+ msecs_to_jiffies(10000));
+ if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+ mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
+ ioc->ioc_link_reset_in_progress)
+ ioc->ioc_link_reset_in_progress = 0;
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ issue_reset =
+ mpt3sas_base_check_cmd_timeout(ioc,
+ ioc->base_cmds.status, mpi_request,
+ sizeof(Mpi2SasIoUnitControlRequest_t)/4);
+ goto issue_host_reset;
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+ memcpy(mpi_reply, ioc->base_cmds.reply,
+ sizeof(Mpi2SasIoUnitControlReply_t));
+ else
+ memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+
+ issue_host_reset:
+ if (issue_reset)
+ mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ rc = -EFAULT;
+ out:
+ mutex_unlock(&ioc->base_cmds.mutex);
+ return rc;
+}
+
+/**
+ * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SCSI Enclosure Processor request message causes the IOC to
+ * communicate with SES devices to control LED status signals.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
+{
+ u16 smid;
+ u32 ioc_state;
+ u8 issue_reset = 0;
+ int rc;
+ void *request;
+ u16 wait_state_count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mutex_lock(&ioc->base_cmds.mutex);
+
+ if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+ pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ wait_state_count = 0;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ if (wait_state_count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to ioc not operational\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+ ssleep(1);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ pr_info(MPT3SAS_FMT
+ "%s: waiting for operational state(count=%d)\n",
+ ioc->name,
+ __func__, wait_state_count);
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->base_cmds.done,
+ msecs_to_jiffies(10000));
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ issue_reset =
+ mpt3sas_base_check_cmd_timeout(ioc,
+ ioc->base_cmds.status, mpi_request,
+ sizeof(Mpi2SepRequest_t)/4);
+ goto issue_host_reset;
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+ memcpy(mpi_reply, ioc->base_cmds.reply,
+ sizeof(Mpi2SepReply_t));
+ else
+ memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+
+ issue_host_reset:
+ if (issue_reset)
+ mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ rc = -EFAULT;
+ out:
+ mutex_unlock(&ioc->base_cmds.mutex);
+ return rc;
+}
+
+/**
+ * _base_get_port_facts - obtain port facts reply and save in ioc
+ * @ioc: per adapter object
+ * @port: ?
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port)
+{
+ Mpi2PortFactsRequest_t mpi_request;
+ Mpi2PortFactsReply_t mpi_reply;
+ struct mpt3sas_port_facts *pfacts;
+ int mpi_reply_sz, mpi_request_sz, r;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
+ mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
+ memset(&mpi_request, 0, mpi_request_sz);
+ mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
+ mpi_request.PortNumber = port;
+ r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+ (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ pfacts = &ioc->pfacts[port];
+ memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
+ pfacts->PortNumber = mpi_reply.PortNumber;
+ pfacts->VP_ID = mpi_reply.VP_ID;
+ pfacts->VF_ID = mpi_reply.VF_ID;
+ pfacts->MaxPostedCmdBuffers =
+ le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
+
+ return 0;
+}
+
+/**
+ * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
+ * @ioc: per adapter object
+ * @timeout:
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+ u32 ioc_state;
+ int rc;
+
+ dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: host in pci error recovery\n", ioc->name, __func__));
+ return -EFAULT;
+ }
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+ ioc->name, __func__, ioc_state));
+
+ if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
+ (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+ return 0;
+
+ if (ioc_state & MPI2_DOORBELL_USED) {
+ dhsprintk(ioc, printk(MPT3SAS_FMT
+ "unexpected doorbell active!\n", ioc->name));
+ goto issue_diag_reset;
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc, ioc_state &
+ MPI2_DOORBELL_DATA_MASK);
+ goto issue_diag_reset;
+ }
+
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
+ if (ioc_state) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state));
+ return -EFAULT;
+ }
+
+ issue_diag_reset:
+ rc = _base_diag_reset(ioc);
+ return rc;
+}
+
+/**
+ * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2IOCFactsRequest_t mpi_request;
+ Mpi2IOCFactsReply_t mpi_reply;
+ struct mpt3sas_facts *facts;
+ int mpi_reply_sz, mpi_request_sz, r;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ r = _base_wait_for_iocstate(ioc, 10);
+ if (r) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: failed getting to correct state\n",
+ ioc->name, __func__));
+ return r;
+ }
+ mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
+ mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
+ memset(&mpi_request, 0, mpi_request_sz);
+ mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
+ r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+ (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ facts = &ioc->facts;
+ memset(facts, 0, sizeof(struct mpt3sas_facts));
+ facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
+ facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
+ facts->VP_ID = mpi_reply.VP_ID;
+ facts->VF_ID = mpi_reply.VF_ID;
+ facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
+ facts->MaxChainDepth = mpi_reply.MaxChainDepth;
+ facts->WhoInit = mpi_reply.WhoInit;
+ facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+ facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
+ if (ioc->msix_enable && (facts->MaxMSIxVectors <=
+ MAX_COMBINED_MSIX_VECTORS(ioc->is_gen35_ioc)))
+ ioc->combined_reply_queue = 0;
+ facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
+ facts->MaxReplyDescriptorPostQueueDepth =
+ le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
+ facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
+ facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
+ if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
+ ioc->ir_firmware = 1;
+ if ((facts->IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices))
+ ioc->rdpq_array_capable = 1;
+ facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
+ facts->IOCRequestFrameSize =
+ le16_to_cpu(mpi_reply.IOCRequestFrameSize);
+ if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+ facts->IOCMaxChainSegmentSize =
+ le16_to_cpu(mpi_reply.IOCMaxChainSegmentSize);
+ }
+ facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
+ facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
+ ioc->shost->max_id = -1;
+ facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
+ facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
+ facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
+ facts->HighPriorityCredit =
+ le16_to_cpu(mpi_reply.HighPriorityCredit);
+ facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
+ facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+ facts->CurrentHostPageSize = mpi_reply.CurrentHostPageSize;
+
+ /*
+ * Get the Page Size from IOC Facts. If it's 0, default to 4k.
+ */
+ ioc->page_size = 1 << facts->CurrentHostPageSize;
+ if (ioc->page_size == 1) {
+ pr_info(MPT3SAS_FMT "CurrentHostPageSize is 0: Setting "
+ "default host page size to 4k\n", ioc->name);
+ ioc->page_size = 1 << MPT3SAS_HOST_PAGE_SIZE_4K;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "CurrentHostPageSize(%d)\n",
+ ioc->name, facts->CurrentHostPageSize));
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "hba queue depth(%d), max chains per io(%d)\n",
+ ioc->name, facts->RequestCredit,
+ facts->MaxChainDepth));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request frame size(%d), reply frame size(%d)\n", ioc->name,
+ facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
+ return 0;
+}
+
+/**
+ * _base_send_ioc_init - send ioc_init to firmware
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2IOCInitRequest_t mpi_request;
+ Mpi2IOCInitReply_t mpi_reply;
+ int i, r = 0;
+ ktime_t current_time;
+ u16 ioc_status;
+ u32 reply_post_free_array_sz = 0;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
+ mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
+ mpi_request.VF_ID = 0; /* TODO */
+ mpi_request.VP_ID = 0;
+ mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
+ mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+ mpi_request.HostPageSize = MPT3SAS_HOST_PAGE_SIZE_4K;
+
+ if (_base_is_controller_msix_enabled(ioc))
+ mpi_request.HostMSIxVectors = ioc->reply_queue_count;
+ mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
+ mpi_request.ReplyDescriptorPostQueueDepth =
+ cpu_to_le16(ioc->reply_post_queue_depth);
+ mpi_request.ReplyFreeQueueDepth =
+ cpu_to_le16(ioc->reply_free_queue_depth);
+
+ mpi_request.SenseBufferAddressHigh =
+ cpu_to_le32((u64)ioc->sense_dma >> 32);
+ mpi_request.SystemReplyAddressHigh =
+ cpu_to_le32((u64)ioc->reply_dma >> 32);
+ mpi_request.SystemRequestFrameBaseAddress =
+ cpu_to_le64((u64)ioc->request_dma);
+ mpi_request.ReplyFreeQueueAddress =
+ cpu_to_le64((u64)ioc->reply_free_dma);
+
+ if (ioc->rdpq_array_enable) {
+ reply_post_free_array_sz = ioc->reply_queue_count *
+ sizeof(Mpi2IOCInitRDPQArrayEntry);
+ memset(ioc->reply_post_free_array, 0, reply_post_free_array_sz);
+ for (i = 0; i < ioc->reply_queue_count; i++)
+ ioc->reply_post_free_array[i].RDPQBaseAddress =
+ cpu_to_le64(
+ (u64)ioc->reply_post[i].reply_post_free_dma);
+ mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)ioc->reply_post_free_array_dma);
+ } else {
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+ }
+
+ /* This time stamp specifies number of milliseconds
+ * since epoch ~ midnight January 1, 1970.
+ */
+ current_time = ktime_get_real();
+ mpi_request.TimeStamp = cpu_to_le64(ktime_to_ms(current_time));
+
+ if (ioc->logging_level & MPT_DEBUG_INIT) {
+ __le32 *mfp;
+ int i;
+
+ mfp = (__le32 *)&mpi_request;
+ pr_info("\toffset:data\n");
+ for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
+ pr_info("\t[0x%02x]:%08x\n", i*4,
+ le32_to_cpu(mfp[i]));
+ }
+
+ r = _base_handshake_req_reply_wait(ioc,
+ sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
+ sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
+ mpi_reply.IOCLogInfo) {
+ pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__);
+ r = -EIO;
+ }
+
+ return r;
+}
+
+/**
+ * mpt3sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+
+ if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
+ return 1;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (!mpi_reply)
+ return 1;
+
+ if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
+ return 1;
+
+ ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
+ ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
+ ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
+ memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ ioc->port_enable_failed = 1;
+
+ if (ioc->is_driver_loading) {
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ mpt3sas_port_enable_complete(ioc);
+ return 1;
+ } else {
+ ioc->start_scan_failed = ioc_status;
+ ioc->start_scan = 0;
+ return 1;
+ }
+ }
+ complete(&ioc->port_enable_cmds.done);
+ return 1;
+}
+
+/**
+ * _base_send_port_enable - send port_enable(discovery stuff) to firmware
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ Mpi2PortEnableReply_t *mpi_reply;
+ int r = 0;
+ u16 smid;
+ u16 ioc_status;
+
+ pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ init_completion(&ioc->port_enable_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ);
+ if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2PortEnableRequest_t)/4);
+ if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
+ r = -EFAULT;
+ else
+ r = -ETIME;
+ goto out;
+ }
+
+ mpi_reply = ioc->port_enable_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n",
+ ioc->name, __func__, ioc_status);
+ r = -EFAULT;
+ goto out;
+ }
+
+ out:
+ ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+ pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+ "SUCCESS" : "FAILED"));
+ return r;
+}
+
+/**
+ * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ u16 smid;
+
+ pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ mpt3sas_base_put_smid_default(ioc, smid);
+ return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Return: 1 for wait, 0 for don't wait.
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
+{
+ /* We wait for discovery to complete if IR firmware is loaded.
+ * The sas topology events arrive before PD events, so we need time to
+ * turn on the bit in ioc->pd_handles to indicate PD
+ * Also, it maybe required to report Volumes ahead of physical
+ * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+ */
+ if (ioc->ir_firmware)
+ return 1;
+
+ /* if no Bios, then we don't need to wait */
+ if (!ioc->bios_pg3.BiosVersion)
+ return 0;
+
+ /* Bios is present, then we drop down here.
+ *
+ * If there any entries in the Bios Page 2, then we wait
+ * for discovery to complete.
+ */
+
+ /* Current Boot Device */
+ if ((ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Request Boot Device */
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Alternate Request Boot Device */
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+ return 0;
+
+ return 1;
+}
+
+/**
+ * _base_unmask_events - turn on notification for this event
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The mask is stored in ioc->event_masks.
+ */
+static void
+_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+ u32 desired_event;
+
+ if (event >= 128)
+ return;
+
+ desired_event = (1 << (event % 32));
+
+ if (event < 32)
+ ioc->event_masks[0] &= ~desired_event;
+ else if (event < 64)
+ ioc->event_masks[1] &= ~desired_event;
+ else if (event < 96)
+ ioc->event_masks[2] &= ~desired_event;
+ else if (event < 128)
+ ioc->event_masks[3] &= ~desired_event;
+}
+
+/**
+ * _base_event_notification - send event notification
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2EventNotificationRequest_t *mpi_request;
+ u16 smid;
+ int r = 0;
+ int i;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
+ for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ mpi_request->EventMasks[i] =
+ cpu_to_le32(ioc->event_masks[i]);
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2EventNotificationRequest_t)/4);
+ if (ioc->base_cmds.status & MPT3_CMD_RESET)
+ r = -EFAULT;
+ else
+ r = -ETIME;
+ } else
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n",
+ ioc->name, __func__));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ return r;
+}
+
+/**
+ * mpt3sas_base_validate_event_type - validating event types
+ * @ioc: per adapter object
+ * @event_type: firmware event
+ *
+ * This will turn on firmware event notification when application
+ * ask for that event. We don't mask events that are already enabled.
+ */
+void
+mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
+{
+ int i, j;
+ u32 event_mask, desired_event;
+ u8 send_update_to_fw;
+
+ for (i = 0, send_update_to_fw = 0; i <
+ MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
+ event_mask = ~event_type[i];
+ desired_event = 1;
+ for (j = 0; j < 32; j++) {
+ if (!(event_mask & desired_event) &&
+ (ioc->event_masks[i] & desired_event)) {
+ ioc->event_masks[i] &= ~desired_event;
+ send_update_to_fw = 1;
+ }
+ desired_event = (desired_event << 1);
+ }
+ }
+
+ if (!send_update_to_fw)
+ return;
+
+ mutex_lock(&ioc->base_cmds.mutex);
+ _base_event_notification(ioc);
+ mutex_unlock(&ioc->base_cmds.mutex);
+}
+
+/**
+ * _base_diag_reset - the "big hammer" start of day reset
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 host_diagnostic;
+ u32 ioc_state;
+ u32 count;
+ u32 hcb_size;
+
+ pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n",
+ ioc->name));
+
+ count = 0;
+ do {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "write magic sequence\n", ioc->name));
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+ /* wait 100 msec */
+ msleep(100);
+
+ if (count++ > 20)
+ goto out;
+
+ host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
+ ioc->name, count, host_diagnostic));
+
+ } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+
+ hcb_size = readl(&ioc->chip->HCBSize);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n",
+ ioc->name));
+ writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
+ &ioc->chip->HostDiagnostic);
+
+ /*This delay allows the chip PCIe hardware time to finish reset tasks*/
+ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+
+ /* Approximately 300 second max wait */
+ for (count = 0; count < (300000000 /
+ MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
+
+ host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+
+ if (host_diagnostic == 0xFFFFFFFF)
+ goto out;
+ if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
+ break;
+
+ msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000);
+ }
+
+ if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "restart the adapter assuming the HCB Address points to good F/W\n",
+ ioc->name));
+ host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
+ host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
+ writel(host_diagnostic, &ioc->chip->HostDiagnostic);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "re-enable the HCDW\n", ioc->name));
+ writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
+ &ioc->chip->HCBSize);
+ }
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n",
+ ioc->name));
+ writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
+ &ioc->chip->HostDiagnostic);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "disable writes to the diagnostic register\n", ioc->name));
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "Wait for FW to go to the READY state\n", ioc->name));
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20);
+ if (ioc_state) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ goto out;
+ }
+
+ pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name);
+ return 0;
+
+ out:
+ pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name);
+ return -EFAULT;
+}
+
+/**
+ * _base_make_ioc_ready - put controller in READY state
+ * @ioc: per adapter object
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
+{
+ u32 ioc_state;
+ int rc;
+ int count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery)
+ return 0;
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+ ioc->name, __func__, ioc_state));
+
+ /* if in RESET state, it should move to READY state shortly */
+ count = 0;
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
+ while ((ioc_state & MPI2_IOC_STATE_MASK) !=
+ MPI2_IOC_STATE_READY) {
+ if (count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ return -EFAULT;
+ }
+ ssleep(1);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ }
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
+ return 0;
+
+ if (ioc_state & MPI2_DOORBELL_USED) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "unexpected doorbell active!\n",
+ ioc->name));
+ goto issue_diag_reset;
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc, ioc_state &
+ MPI2_DOORBELL_DATA_MASK);
+ goto issue_diag_reset;
+ }
+
+ if (type == FORCE_BIG_HAMMER)
+ goto issue_diag_reset;
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+ if (!(_base_send_ioc_reset(ioc,
+ MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15))) {
+ return 0;
+ }
+
+ issue_diag_reset:
+ rc = _base_diag_reset(ioc);
+ return rc;
+}
+
+/**
+ * _base_make_ioc_operational - put controller in OPERATIONAL state
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
+{
+ int r, i, index;
+ unsigned long flags;
+ u32 reply_address;
+ u16 smid;
+ struct _tr_list *delayed_tr, *delayed_tr_next;
+ struct _sc_list *delayed_sc, *delayed_sc_next;
+ struct _event_ack_list *delayed_event_ack, *delayed_event_ack_next;
+ u8 hide_flag;
+ struct adapter_reply_queue *reply_q;
+ Mpi2ReplyDescriptorsUnion_t *reply_post_free_contig;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ /* clean the delayed target reset list */
+ list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+ &ioc->delayed_tr_list, list) {
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ }
+
+
+ list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+ &ioc->delayed_tr_volume_list, list) {
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ }
+
+ list_for_each_entry_safe(delayed_sc, delayed_sc_next,
+ &ioc->delayed_sc_list, list) {
+ list_del(&delayed_sc->list);
+ kfree(delayed_sc);
+ }
+
+ list_for_each_entry_safe(delayed_event_ack, delayed_event_ack_next,
+ &ioc->delayed_event_ack_list, list) {
+ list_del(&delayed_event_ack->list);
+ kfree(delayed_event_ack);
+ }
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+
+ /* hi-priority queue */
+ INIT_LIST_HEAD(&ioc->hpr_free_list);
+ smid = ioc->hi_priority_smid;
+ for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ ioc->hpr_lookup[i].smid = smid;
+ list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+ &ioc->hpr_free_list);
+ }
+
+ /* internal queue */
+ INIT_LIST_HEAD(&ioc->internal_free_list);
+ smid = ioc->internal_smid;
+ for (i = 0; i < ioc->internal_depth; i++, smid++) {
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ ioc->internal_lookup[i].smid = smid;
+ list_add_tail(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
+
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ /* initialize Reply Free Queue */
+ for (i = 0, reply_address = (u32)ioc->reply_dma ;
+ i < ioc->reply_free_queue_depth ; i++, reply_address +=
+ ioc->reply_sz) {
+ ioc->reply_free[i] = cpu_to_le32(reply_address);
+ if (ioc->is_mcpu_endpoint)
+ _base_clone_reply_to_sys_mem(ioc,
+ reply_address, i);
+ }
+
+ /* initialize reply queues */
+ if (ioc->is_driver_loading)
+ _base_assign_reply_queues(ioc);
+
+ /* initialize Reply Post Free Queue */
+ index = 0;
+ reply_post_free_contig = ioc->reply_post[0].reply_post_free;
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ /*
+ * If RDPQ is enabled, switch to the next allocation.
+ * Otherwise advance within the contiguous region.
+ */
+ if (ioc->rdpq_array_enable) {
+ reply_q->reply_post_free =
+ ioc->reply_post[index++].reply_post_free;
+ } else {
+ reply_q->reply_post_free = reply_post_free_contig;
+ reply_post_free_contig += ioc->reply_post_queue_depth;
+ }
+
+ reply_q->reply_post_host_index = 0;
+ for (i = 0; i < ioc->reply_post_queue_depth; i++)
+ reply_q->reply_post_free[i].Words =
+ cpu_to_le64(ULLONG_MAX);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_free_queue;
+ }
+ skip_init_reply_post_free_queue:
+
+ r = _base_send_ioc_init(ioc);
+ if (r)
+ return r;
+
+ /* initialize reply free host index */
+ ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
+ writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
+
+ /* initialize reply post host index */
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ if (ioc->combined_reply_queue)
+ writel((reply_q->msix_index & 7)<<
+ MPI2_RPHI_MSIX_INDEX_SHIFT,
+ ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
+ else
+ writel(reply_q->msix_index <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT,
+ &ioc->chip->ReplyPostHostIndex);
+
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_host_index;
+ }
+
+ skip_init_reply_post_host_index:
+
+ _base_unmask_interrupts(ioc);
+
+ if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+ r = _base_display_fwpkg_version(ioc);
+ if (r)
+ return r;
+ }
+
+ _base_static_config_pages(ioc);
+ r = _base_event_notification(ioc);
+ if (r)
+ return r;
+
+ if (ioc->is_driver_loading) {
+
+ if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+ == 0x80) {
+ hide_flag = (u8) (
+ le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
+ MFG_PAGE10_HIDE_SSDS_MASK);
+ if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+ ioc->mfg_pg10_hide_flag = hide_flag;
+ }
+
+ ioc->wait_for_discovery_to_complete =
+ _base_determine_wait_on_discovery(ioc);
+
+ return r; /* scan_start and scan_finished support */
+ }
+
+ r = _base_send_port_enable(ioc);
+ if (r)
+ return r;
+
+ return r;
+}
+
+/**
+ * mpt3sas_base_free_resources - free resources controller resources
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ /* synchronizing freeing resource with pci_access_mutex lock */
+ mutex_lock(&ioc->pci_access_mutex);
+ if (ioc->chip_phys && ioc->chip) {
+ _base_mask_interrupts(ioc);
+ ioc->shost_recovery = 1;
+ _base_make_ioc_ready(ioc, SOFT_RESET);
+ ioc->shost_recovery = 0;
+ }
+
+ mpt3sas_base_unmap_resources(ioc);
+ mutex_unlock(&ioc->pci_access_mutex);
+ return;
+}
+
+/**
+ * mpt3sas_base_attach - attach controller instance
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
+{
+ int r, i;
+ int cpu_id, last_cpu_id = 0;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ /* setup cpu_msix_table */
+ ioc->cpu_count = num_online_cpus();
+ for_each_online_cpu(cpu_id)
+ last_cpu_id = cpu_id;
+ ioc->cpu_msix_table_sz = last_cpu_id + 1;
+ ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
+ ioc->reply_queue_count = 1;
+ if (!ioc->cpu_msix_table) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "allocation for cpu_msix_table failed!!!\n",
+ ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+ sizeof(resource_size_t *), GFP_KERNEL);
+ if (!ioc->reply_post_host_index) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation "
+ "for reply_post_host_index failed!!!\n",
+ ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ }
+
+ ioc->rdpq_array_enable_assigned = 0;
+ ioc->dma_mask = 0;
+ r = mpt3sas_base_map_resources(ioc);
+ if (r)
+ goto out_free_resources;
+
+ pci_set_drvdata(ioc->pdev, ioc->shost);
+ r = _base_get_ioc_facts(ioc);
+ if (r)
+ goto out_free_resources;
+
+ switch (ioc->hba_mpi_version_belonged) {
+ case MPI2_VERSION:
+ ioc->build_sg_scmd = &_base_build_sg_scmd;
+ ioc->build_sg = &_base_build_sg;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge;
+ break;
+ case MPI25_VERSION:
+ case MPI26_VERSION:
+ /*
+ * In SAS3.0,
+ * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+ * Target Status - all require the IEEE formated scatter gather
+ * elements.
+ */
+ ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+ ioc->build_sg = &_base_build_sg_ieee;
+ ioc->build_nvme_prp = &_base_build_nvme_prp;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+ ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+
+ break;
+ }
+
+ if (ioc->is_mcpu_endpoint)
+ ioc->put_smid_scsi_io = &_base_put_smid_mpi_ep_scsi_io;
+ else
+ ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
+
+ /*
+ * These function pointers for other requests that don't
+ * the require IEEE scatter gather elements.
+ *
+ * For example Configuration Pages and SAS IOUNIT Control don't.
+ */
+ ioc->build_sg_mpi = &_base_build_sg;
+ ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
+
+ r = _base_make_ioc_ready(ioc, SOFT_RESET);
+ if (r)
+ goto out_free_resources;
+
+ ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+ sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
+ if (!ioc->pfacts) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+ r = _base_get_port_facts(ioc, i);
+ if (r)
+ goto out_free_resources;
+ }
+
+ r = _base_allocate_memory_pools(ioc);
+ if (r)
+ goto out_free_resources;
+
+ init_waitqueue_head(&ioc->reset_wq);
+
+ /* allocate memory pd handle bitmask list */
+ ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+ if (ioc->facts.MaxDevHandle % 8)
+ ioc->pd_handles_sz++;
+ ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
+ GFP_KERNEL);
+ if (!ioc->pd_handles) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
+ GFP_KERNEL);
+ if (!ioc->blocking_handles) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ /* allocate memory for pending OS device add list */
+ ioc->pend_os_device_add_sz = (ioc->facts.MaxDevHandle / 8);
+ if (ioc->facts.MaxDevHandle % 8)
+ ioc->pend_os_device_add_sz++;
+ ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz,
+ GFP_KERNEL);
+ if (!ioc->pend_os_device_add)
+ goto out_free_resources;
+
+ ioc->device_remove_in_progress_sz = ioc->pend_os_device_add_sz;
+ ioc->device_remove_in_progress =
+ kzalloc(ioc->device_remove_in_progress_sz, GFP_KERNEL);
+ if (!ioc->device_remove_in_progress)
+ goto out_free_resources;
+
+ ioc->fwfault_debug = mpt3sas_fwfault_debug;
+
+ /* base internal command bits */
+ mutex_init(&ioc->base_cmds.mutex);
+ ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+ /* port_enable command bits */
+ ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+
+ /* transport internal command bits */
+ ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->transport_cmds.mutex);
+
+ /* scsih internal command bits */
+ ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->scsih_cmds.mutex);
+
+ /* task management internal command bits */
+ ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->tm_cmds.mutex);
+
+ /* config page internal command bits */
+ ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->config_cmds.mutex);
+
+ /* ctl module internal command bits */
+ ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->ctl_cmds.mutex);
+
+ if (!ioc->base_cmds.reply || !ioc->port_enable_cmds.reply ||
+ !ioc->transport_cmds.reply || !ioc->scsih_cmds.reply ||
+ !ioc->tm_cmds.reply || !ioc->config_cmds.reply ||
+ !ioc->ctl_cmds.reply || !ioc->ctl_cmds.sense) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ ioc->event_masks[i] = -1;
+
+ /* here we enable the events we care about */
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
+ _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
+ _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+ if (ioc->hba_mpi_version_belonged == MPI26_VERSION) {
+ if (ioc->is_gen35_ioc) {
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_PCIE_ENUMERATION);
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
+ }
+ }
+ r = _base_make_ioc_operational(ioc);
+ if (r)
+ goto out_free_resources;
+
+ ioc->non_operational_loop = 0;
+ ioc->got_task_abort_from_ioctl = 0;
+ return 0;
+
+ out_free_resources:
+
+ ioc->remove_host = 1;
+
+ mpt3sas_base_free_resources(ioc);
+ _base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
+ kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
+ kfree(ioc->device_remove_in_progress);
+ kfree(ioc->pend_os_device_add);
+ kfree(ioc->tm_cmds.reply);
+ kfree(ioc->transport_cmds.reply);
+ kfree(ioc->scsih_cmds.reply);
+ kfree(ioc->config_cmds.reply);
+ kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
+ kfree(ioc->ctl_cmds.reply);
+ kfree(ioc->ctl_cmds.sense);
+ kfree(ioc->pfacts);
+ ioc->ctl_cmds.reply = NULL;
+ ioc->base_cmds.reply = NULL;
+ ioc->tm_cmds.reply = NULL;
+ ioc->scsih_cmds.reply = NULL;
+ ioc->transport_cmds.reply = NULL;
+ ioc->config_cmds.reply = NULL;
+ ioc->pfacts = NULL;
+ return r;
+}
+
+
+/**
+ * mpt3sas_base_detach - remove controller instance
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
+{
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpt3sas_base_stop_watchdog(ioc);
+ mpt3sas_base_free_resources(ioc);
+ _base_release_memory_pools(ioc);
+ mpt3sas_free_enclosure_list(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
+ kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
+ kfree(ioc->device_remove_in_progress);
+ kfree(ioc->pend_os_device_add);
+ kfree(ioc->pfacts);
+ kfree(ioc->ctl_cmds.reply);
+ kfree(ioc->ctl_cmds.sense);
+ kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
+ kfree(ioc->tm_cmds.reply);
+ kfree(ioc->transport_cmds.reply);
+ kfree(ioc->scsih_cmds.reply);
+ kfree(ioc->config_cmds.reply);
+}
+
+/**
+ * _base_pre_reset_handler - pre reset handler
+ * @ioc: per adapter object
+ */
+static void _base_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+ mpt3sas_scsih_pre_reset_handler(ioc);
+ mpt3sas_ctl_pre_reset_handler(ioc);
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+}
+
+/**
+ * _base_after_reset_handler - after reset handler
+ * @ioc: per adapter object
+ */
+static void _base_after_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+ mpt3sas_scsih_after_reset_handler(ioc);
+ mpt3sas_ctl_after_reset_handler(ioc);
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+ if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
+ ioc->transport_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
+ complete(&ioc->transport_cmds.done);
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+ ioc->base_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
+ complete(&ioc->base_cmds.done);
+ }
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ ioc->port_enable_failed = 1;
+ ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+ if (ioc->is_driver_loading) {
+ ioc->start_scan_failed =
+ MPI2_IOCSTATUS_INTERNAL_ERROR;
+ ioc->start_scan = 0;
+ ioc->port_enable_cmds.status =
+ MPT3_CMD_NOT_USED;
+ } else {
+ complete(&ioc->port_enable_cmds.done);
+ }
+ }
+ if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
+ ioc->config_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
+ ioc->config_cmds.smid = USHRT_MAX;
+ complete(&ioc->config_cmds.done);
+ }
+}
+
+/**
+ * _base_reset_done_handler - reset done handler
+ * @ioc: per adapter object
+ */
+static void _base_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+ mpt3sas_scsih_reset_done_handler(ioc);
+ mpt3sas_ctl_reset_done_handler(ioc);
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+}
+
+/**
+ * mpt3sas_wait_for_commands_to_complete - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * This function is waiting 10s for all pending commands to complete
+ * prior to putting controller in reset.
+ */
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 ioc_state;
+
+ ioc->pending_io_count = 0;
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
+ return;
+
+ /* pending command count */
+ ioc->pending_io_count = scsi_host_busy(ioc->shost);
+
+ if (!ioc->pending_io_count)
+ return;
+
+ /* wait for pending commands to complete */
+ wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
+}
+
+/**
+ * mpt3sas_base_hard_reset_handler - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
+ enum reset_type type)
+{
+ int r;
+ unsigned long flags;
+ u32 ioc_state;
+ u8 is_fault = 0, is_trigger = 0;
+
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery) {
+ pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n",
+ ioc->name, __func__);
+ r = 0;
+ goto out_unlocked;
+ }
+
+ if (mpt3sas_fwfault_debug)
+ mpt3sas_halt_firmware(ioc);
+
+ /* wait for an active reset in progress to complete */
+ mutex_lock(&ioc->reset_in_progress_mutex);
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->shost_recovery = 1;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+ MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+ (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+ MPT3_DIAG_BUFFER_IS_RELEASED))) {
+ is_trigger = 1;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ is_fault = 1;
+ }
+ _base_pre_reset_handler(ioc);
+ mpt3sas_wait_for_commands_to_complete(ioc);
+ _base_mask_interrupts(ioc);
+ r = _base_make_ioc_ready(ioc, type);
+ if (r)
+ goto out;
+ _base_after_reset_handler(ioc);
+
+ /* If this hard reset is called while port enable is active, then
+ * there is no reason to call make_ioc_operational
+ */
+ if (ioc->is_driver_loading && ioc->port_enable_failed) {
+ ioc->remove_host = 1;
+ r = -EFAULT;
+ goto out;
+ }
+ r = _base_get_ioc_facts(ioc);
+ if (r)
+ goto out;
+
+ if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+ panic("%s: Issue occurred with flashing controller firmware."
+ "Please reboot the system and ensure that the correct"
+ " firmware version is running\n", ioc->name);
+
+ r = _base_make_ioc_operational(ioc);
+ if (!r)
+ _base_reset_done_handler(ioc);
+
+ out:
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n",
+ ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->shost_recovery = 0;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->ioc_reset_count++;
+ mutex_unlock(&ioc->reset_in_progress_mutex);
+
+ out_unlocked:
+ if ((r == 0) && is_trigger) {
+ if (is_fault)
+ mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
+ else
+ mpt3sas_trigger_master(ioc,
+ MASTER_TRIGGER_ADAPTER_RESET);
+ }
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+ __func__));
+ return r;
+}