v4.19.13 snapshot.
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
new file mode 100644
index 0000000..08c7b1e
--- /dev/null
+++ b/drivers/scsi/isci/init.c
@@ -0,0 +1,802 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/efi.h>
+#include <asm/string.h>
+#include <scsi/scsi_host.h>
+#include "host.h"
+#include "isci.h"
+#include "task.h"
+#include "probe_roms.h"
+
+#define MAJ 1
+#define MIN 2
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
+static struct scsi_transport_template *isci_transport_template;
+
+static const struct pci_device_id isci_id_table[] = {
+ { PCI_VDEVICE(INTEL, 0x1D61),},
+ { PCI_VDEVICE(INTEL, 0x1D63),},
+ { PCI_VDEVICE(INTEL, 0x1D65),},
+ { PCI_VDEVICE(INTEL, 0x1D67),},
+ { PCI_VDEVICE(INTEL, 0x1D69),},
+ { PCI_VDEVICE(INTEL, 0x1D6B),},
+ { PCI_VDEVICE(INTEL, 0x1D60),},
+ { PCI_VDEVICE(INTEL, 0x1D62),},
+ { PCI_VDEVICE(INTEL, 0x1D64),},
+ { PCI_VDEVICE(INTEL, 0x1D66),},
+ { PCI_VDEVICE(INTEL, 0x1D68),},
+ { PCI_VDEVICE(INTEL, 0x1D6A),},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, isci_id_table);
+
+/* linux isci specific settings */
+
+unsigned char no_outbound_task_to = 2;
+module_param(no_outbound_task_to, byte, 0);
+MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
+
+u16 ssp_max_occ_to = 20;
+module_param(ssp_max_occ_to, ushort, 0);
+MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
+
+u16 stp_max_occ_to = 5;
+module_param(stp_max_occ_to, ushort, 0);
+MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
+
+u16 ssp_inactive_to = 5;
+module_param(ssp_inactive_to, ushort, 0);
+MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
+
+u16 stp_inactive_to = 5;
+module_param(stp_inactive_to, ushort, 0);
+MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
+
+unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
+module_param(phy_gen, byte, 0);
+MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
+
+unsigned char max_concurr_spinup;
+module_param(max_concurr_spinup, byte, 0);
+MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+
+uint cable_selection_override = CABLE_OVERRIDE_DISABLED;
+module_param(cable_selection_override, uint, 0);
+
+MODULE_PARM_DESC(cable_selection_override,
+ "This field indicates length of the SAS/SATA cable between "
+ "host and device. If any bits > 15 are set (default) "
+ "indicates \"use platform defaults\"");
+
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+ &dev_attr_isci_id,
+ NULL
+};
+
+static struct scsi_host_template isci_sht = {
+
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .proc_name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .scan_finished = isci_host_scan_finished,
+ .scan_start = isci_host_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = ISCI_CAN_QUEUE_VAL,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_abort_handler = sas_eh_abort_handler,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+ .shost_attrs = isci_host_attrs,
+ .track_queue_depth = 1,
+};
+
+static struct sas_domain_function_template isci_transport_ops = {
+
+ /* The class calls these to notify the LLDD of an event. */
+ .lldd_port_formed = isci_port_formed,
+ .lldd_port_deformed = isci_port_deformed,
+
+ /* The class calls these when a device is found or gone. */
+ .lldd_dev_found = isci_remote_device_found,
+ .lldd_dev_gone = isci_remote_device_gone,
+
+ .lldd_execute_task = isci_task_execute_task,
+ /* Task Management Functions. Must be called from process context. */
+ .lldd_abort_task = isci_task_abort_task,
+ .lldd_abort_task_set = isci_task_abort_task_set,
+ .lldd_clear_aca = isci_task_clear_aca,
+ .lldd_clear_task_set = isci_task_clear_task_set,
+ .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset,
+ .lldd_lu_reset = isci_task_lu_reset,
+ .lldd_query_task = isci_task_query_task,
+
+ /* ata recovery called from ata-eh */
+ .lldd_ata_check_ready = isci_ata_check_ready,
+
+ /* Port and Adapter management */
+ .lldd_clear_nexus_port = isci_task_clear_nexus_port,
+ .lldd_clear_nexus_ha = isci_task_clear_nexus_ha,
+
+ /* Phy management */
+ .lldd_control_phy = isci_phy_control,
+
+ /* GPIO support */
+ .lldd_write_gpio = isci_gpio_write,
+};
+
+
+/******************************************************************************
+* P R O T E C T E D M E T H O D S
+******************************************************************************/
+
+
+
+/**
+ * isci_register_sas_ha() - This method initializes various lldd
+ * specific members of the sas_ha struct and calls the libsas
+ * sas_register_ha() function.
+ * @isci_host: This parameter specifies the lldd specific wrapper for the
+ * libsas sas_ha struct.
+ *
+ * This method returns an error code indicating success or failure. The user
+ * should check for possible memory allocation error return otherwise, a zero
+ * indicates success.
+ */
+static int isci_register_sas_ha(struct isci_host *isci_host)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
+ struct asd_sas_phy **sas_phys;
+ struct asd_sas_port **sas_ports;
+
+ sas_phys = devm_kcalloc(&isci_host->pdev->dev,
+ SCI_MAX_PHYS, sizeof(void *),
+ GFP_KERNEL);
+ if (!sas_phys)
+ return -ENOMEM;
+
+ sas_ports = devm_kcalloc(&isci_host->pdev->dev,
+ SCI_MAX_PORTS, sizeof(void *),
+ GFP_KERNEL);
+ if (!sas_ports)
+ return -ENOMEM;
+
+ sas_ha->sas_ha_name = DRV_NAME;
+ sas_ha->lldd_module = THIS_MODULE;
+ sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0];
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ sas_phys[i] = &isci_host->phys[i].sas_phy;
+ sas_ports[i] = &isci_host->sas_ports[i];
+ }
+
+ sas_ha->sas_phy = sas_phys;
+ sas_ha->sas_port = sas_ports;
+ sas_ha->num_phys = SCI_MAX_PHYS;
+
+ sas_ha->strict_wide_ports = 1;
+
+ sas_register_ha(sas_ha);
+
+ return 0;
+}
+
+static void isci_unregister(struct isci_host *isci_host)
+{
+ struct Scsi_Host *shost;
+
+ if (!isci_host)
+ return;
+
+ shost = to_shost(isci_host);
+ sas_unregister_ha(&isci_host->sas_ha);
+
+ sas_remove_host(shost);
+ scsi_host_put(shost);
+}
+
+static int isci_pci_init(struct pci_dev *pdev)
+{
+ int err, bar_num, bar_mask = 0;
+ void __iomem * const *iomap;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed enable PCI device %s!\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
+ bar_mask |= 1 << (bar_num * 2);
+
+ err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
+ if (err)
+ return err;
+
+ iomap = pcim_iomap_table(pdev);
+ if (!iomap)
+ return -ENOMEM;
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int num_controllers(struct pci_dev *pdev)
+{
+ /* bar size alone can tell us if we are running with a dual controller
+ * part, no need to trust revision ids that might be under broken firmware
+ * control
+ */
+ resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
+ resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
+
+ if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
+ smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
+ return SCI_MAX_CONTROLLERS;
+ else
+ return 1;
+}
+
+static int isci_setup_interrupts(struct pci_dev *pdev)
+{
+ int err, i, num_msix;
+ struct isci_host *ihost;
+ struct isci_pci_info *pci_info = to_pci_info(pdev);
+
+ /*
+ * Determine the number of vectors associated with this
+ * PCI function.
+ */
+ num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
+
+ err = pci_alloc_irq_vectors(pdev, num_msix, num_msix, PCI_IRQ_MSIX);
+ if (err < 0)
+ goto intx;
+
+ for (i = 0; i < num_msix; i++) {
+ int id = i / SCI_NUM_MSI_X_INT;
+ irq_handler_t isr;
+
+ ihost = pci_info->hosts[id];
+ /* odd numbered vectors are error interrupts */
+ if (i & 1)
+ isr = isci_error_isr;
+ else
+ isr = isci_msix_isr;
+
+ err = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i),
+ isr, 0, DRV_NAME"-msix", ihost);
+ if (!err)
+ continue;
+
+ dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
+ while (i--) {
+ id = i / SCI_NUM_MSI_X_INT;
+ ihost = pci_info->hosts[id];
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i),
+ ihost);
+ }
+ pci_free_irq_vectors(pdev);
+ goto intx;
+ }
+ return 0;
+
+ intx:
+ for_each_isci_host(i, ihost, pdev) {
+ err = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, 0),
+ isci_intx_isr, IRQF_SHARED, DRV_NAME"-intx",
+ ihost);
+ if (err)
+ break;
+ }
+ return err;
+}
+
+static void isci_user_parameters_get(struct sci_user_parameters *u)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ struct sci_phy_user_params *u_phy = &u->phys[i];
+
+ u_phy->max_speed_generation = phy_gen;
+
+ /* we are not exporting these for now */
+ u_phy->align_insertion_frequency = 0x7f;
+ u_phy->in_connection_align_insertion_frequency = 0xff;
+ u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
+ }
+
+ u->stp_inactivity_timeout = stp_inactive_to;
+ u->ssp_inactivity_timeout = ssp_inactive_to;
+ u->stp_max_occupancy_timeout = stp_max_occ_to;
+ u->ssp_max_occupancy_timeout = ssp_max_occ_to;
+ u->no_outbound_task_timeout = no_outbound_task_to;
+ u->max_concurr_spinup = max_concurr_spinup;
+}
+
+static enum sci_status sci_user_parameters_set(struct isci_host *ihost,
+ struct sci_user_parameters *sci_parms)
+{
+ u16 index;
+
+ /*
+ * Validate the user parameters. If they are not legal, then
+ * return a failure.
+ */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct sci_phy_user_params *u;
+
+ u = &sci_parms->phys[index];
+
+ if (!((u->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) &&
+ (u->max_speed_generation > SCIC_SDS_PARM_NO_SPEED)))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ if ((u->in_connection_align_insertion_frequency < 3) ||
+ (u->align_insertion_frequency == 0) ||
+ (u->notify_enable_spin_up_insertion_frequency == 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ if ((sci_parms->stp_inactivity_timeout == 0) ||
+ (sci_parms->ssp_inactivity_timeout == 0) ||
+ (sci_parms->stp_max_occupancy_timeout == 0) ||
+ (sci_parms->ssp_max_occupancy_timeout == 0) ||
+ (sci_parms->no_outbound_task_timeout == 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms));
+
+ return SCI_SUCCESS;
+}
+
+static void sci_oem_defaults(struct isci_host *ihost)
+{
+ /* these defaults are overridden by the platform / firmware */
+ struct sci_user_parameters *user = &ihost->user_parameters;
+ struct sci_oem_params *oem = &ihost->oem_parameters;
+ int i;
+
+ /* Default to APC mode. */
+ oem->controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+
+ /* Default to APC mode. */
+ oem->controller.max_concurr_spin_up = 1;
+
+ /* Default to no SSC operation. */
+ oem->controller.do_enable_ssc = false;
+
+ /* Default to short cables on all phys. */
+ oem->controller.cable_selection_mask = 0;
+
+ /* Initialize all of the port parameter information to narrow ports. */
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ oem->ports[i].phy_mask = 0;
+
+ /* Initialize all of the phy parameter information. */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ /* Default to 3G (i.e. Gen 2). */
+ user->phys[i].max_speed_generation = SCIC_SDS_PARM_GEN2_SPEED;
+
+ /* the frequencies cannot be 0 */
+ user->phys[i].align_insertion_frequency = 0x7f;
+ user->phys[i].in_connection_align_insertion_frequency = 0xff;
+ user->phys[i].notify_enable_spin_up_insertion_frequency = 0x33;
+
+ /* Previous Vitesse based expanders had a arbitration issue that
+ * is worked around by having the upper 32-bits of SAS address
+ * with a value greater then the Vitesse company identifier.
+ * Hence, usage of 0x5FCFFFFF.
+ */
+ oem->phys[i].sas_address.low = 0x1 + ihost->id;
+ oem->phys[i].sas_address.high = 0x5FCFFFFF;
+ }
+
+ user->stp_inactivity_timeout = 5;
+ user->ssp_inactivity_timeout = 5;
+ user->stp_max_occupancy_timeout = 5;
+ user->ssp_max_occupancy_timeout = 20;
+ user->no_outbound_task_timeout = 2;
+}
+
+static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
+{
+ struct isci_orom *orom = to_pci_info(pdev)->orom;
+ struct sci_user_parameters sci_user_params;
+ u8 oem_version = ISCI_ROM_VER_1_0;
+ struct isci_host *ihost;
+ struct Scsi_Host *shost;
+ int err, i;
+
+ ihost = devm_kzalloc(&pdev->dev, sizeof(*ihost), GFP_KERNEL);
+ if (!ihost)
+ return NULL;
+
+ ihost->pdev = pdev;
+ ihost->id = id;
+ spin_lock_init(&ihost->scic_lock);
+ init_waitqueue_head(&ihost->eventq);
+ ihost->sas_ha.dev = &ihost->pdev->dev;
+ ihost->sas_ha.lldd_ha = ihost;
+ tasklet_init(&ihost->completion_tasklet,
+ isci_host_completion_routine, (unsigned long)ihost);
+
+ /* validate module parameters */
+ /* TODO: kill struct sci_user_parameters and reference directly */
+ sci_oem_defaults(ihost);
+ isci_user_parameters_get(&sci_user_params);
+ if (sci_user_parameters_set(ihost, &sci_user_params)) {
+ dev_warn(&pdev->dev,
+ "%s: sci_user_parameters_set failed\n", __func__);
+ return NULL;
+ }
+
+ /* sanity check platform (or 'firmware') oem parameters */
+ if (orom) {
+ if (id < 0 || id >= SCI_MAX_CONTROLLERS || id > orom->hdr.num_elements) {
+ dev_warn(&pdev->dev, "parsing firmware oem parameters failed\n");
+ return NULL;
+ }
+ ihost->oem_parameters = orom->ctrl[id];
+ oem_version = orom->hdr.version;
+ }
+
+ /* validate oem parameters (platform, firmware, or built-in defaults) */
+ if (sci_oem_parameters_validate(&ihost->oem_parameters, oem_version)) {
+ dev_warn(&pdev->dev, "oem parameter validation failed\n");
+ return NULL;
+ }
+
+ for (i = 0; i < SCI_MAX_PORTS; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+
+ INIT_LIST_HEAD(&iport->remote_dev_list);
+ iport->isci_host = ihost;
+ }
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ isci_phy_init(&ihost->phys[i], ihost, i);
+
+ for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
+ struct isci_remote_device *idev = &ihost->devices[i];
+
+ INIT_LIST_HEAD(&idev->node);
+ }
+
+ shost = scsi_host_alloc(&isci_sht, sizeof(void *));
+ if (!shost)
+ return NULL;
+
+ dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: "
+ "{%s, %s, %s, %s}\n",
+ (is_cable_select_overridden() ? "* " : ""), ihost->id,
+ lookup_cable_names(decode_cable_selection(ihost, 3)),
+ lookup_cable_names(decode_cable_selection(ihost, 2)),
+ lookup_cable_names(decode_cable_selection(ihost, 1)),
+ lookup_cable_names(decode_cable_selection(ihost, 0)));
+
+ err = isci_host_init(ihost);
+ if (err)
+ goto err_shost;
+
+ SHOST_TO_SAS_HA(shost) = &ihost->sas_ha;
+ ihost->sas_ha.core.shost = shost;
+ shost->transportt = isci_transport_template;
+
+ shost->max_id = ~0;
+ shost->max_lun = ~0;
+ shost->max_cmd_len = MAX_COMMAND_SIZE;
+
+ err = scsi_add_host(shost, &pdev->dev);
+ if (err)
+ goto err_shost;
+
+ err = isci_register_sas_ha(ihost);
+ if (err)
+ goto err_shost_remove;
+
+ return ihost;
+
+ err_shost_remove:
+ scsi_remove_host(shost);
+ err_shost:
+ scsi_host_put(shost);
+
+ return NULL;
+}
+
+static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct isci_pci_info *pci_info;
+ int err, i;
+ struct isci_host *isci_host;
+ const struct firmware *fw = NULL;
+ struct isci_orom *orom = NULL;
+ char *source = "(platform)";
+
+ dev_info(&pdev->dev, "driver configured for rev: %d silicon\n",
+ pdev->revision);
+
+ pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+ pci_set_drvdata(pdev, pci_info);
+
+ if (efi_enabled(EFI_RUNTIME_SERVICES))
+ orom = isci_get_efi_var(pdev);
+
+ if (!orom)
+ orom = isci_request_oprom(pdev);
+
+ for (i = 0; orom && i < num_controllers(pdev); i++) {
+ if (sci_oem_parameters_validate(&orom->ctrl[i],
+ orom->hdr.version)) {
+ dev_warn(&pdev->dev,
+ "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
+ orom = NULL;
+ break;
+ }
+ }
+
+ if (!orom) {
+ source = "(firmware)";
+ orom = isci_request_firmware(pdev, fw);
+ if (!orom) {
+ /* TODO convert this to WARN_TAINT_ONCE once the
+ * orom/efi parameter support is widely available
+ */
+ dev_warn(&pdev->dev,
+ "Loading user firmware failed, using default "
+ "values\n");
+ dev_warn(&pdev->dev,
+ "Default OEM configuration being used: 4 "
+ "narrow ports, and default SAS Addresses\n");
+ }
+ }
+
+ if (orom)
+ dev_info(&pdev->dev,
+ "OEM SAS parameters (version: %u.%u) loaded %s\n",
+ (orom->hdr.version & 0xf0) >> 4,
+ (orom->hdr.version & 0xf), source);
+
+ pci_info->orom = orom;
+
+ err = isci_pci_init(pdev);
+ if (err)
+ return err;
+
+ for (i = 0; i < num_controllers(pdev); i++) {
+ struct isci_host *h = isci_host_alloc(pdev, i);
+
+ if (!h) {
+ err = -ENOMEM;
+ goto err_host_alloc;
+ }
+ pci_info->hosts[i] = h;
+
+ /* turn on DIF support */
+ scsi_host_set_prot(to_shost(h),
+ SHOST_DIF_TYPE1_PROTECTION |
+ SHOST_DIF_TYPE2_PROTECTION |
+ SHOST_DIF_TYPE3_PROTECTION);
+ scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
+ }
+
+ err = isci_setup_interrupts(pdev);
+ if (err)
+ goto err_host_alloc;
+
+ for_each_isci_host(i, isci_host, pdev)
+ scsi_scan_host(to_shost(isci_host));
+
+ return 0;
+
+ err_host_alloc:
+ for_each_isci_host(i, isci_host, pdev)
+ isci_unregister(isci_host);
+ return err;
+}
+
+static void isci_pci_remove(struct pci_dev *pdev)
+{
+ struct isci_host *ihost;
+ int i;
+
+ for_each_isci_host(i, ihost, pdev) {
+ wait_for_start(ihost);
+ isci_unregister(ihost);
+ isci_host_deinit(ihost);
+ }
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int isci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct isci_host *ihost;
+ int i;
+
+ for_each_isci_host(i, ihost, pdev) {
+ sas_suspend_ha(&ihost->sas_ha);
+ isci_host_deinit(ihost);
+ }
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int isci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct isci_host *ihost;
+ int rc, i;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ rc = pcim_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "enabling device failure after resume(%d)\n", rc);
+ return rc;
+ }
+
+ pci_set_master(pdev);
+
+ for_each_isci_host(i, ihost, pdev) {
+ sas_prep_resume_ha(&ihost->sas_ha);
+
+ isci_host_init(ihost);
+ isci_host_start(ihost->sas_ha.core.shost);
+ wait_for_start(ihost);
+
+ sas_resume_ha(&ihost->sas_ha);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(isci_pm_ops, isci_suspend, isci_resume);
+
+static struct pci_driver isci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = isci_id_table,
+ .probe = isci_pci_probe,
+ .remove = isci_pci_remove,
+ .driver.pm = &isci_pm_ops,
+};
+
+static __init int isci_init(void)
+{
+ int err;
+
+ pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+ DRV_NAME, DRV_VERSION);
+
+ isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
+ if (!isci_transport_template)
+ return -ENOMEM;
+
+ err = pci_register_driver(&isci_pci_driver);
+ if (err)
+ sas_release_transport(isci_transport_template);
+
+ return err;
+}
+
+static __exit void isci_exit(void)
+{
+ pci_unregister_driver(&isci_pci_driver);
+ sas_release_transport(isci_transport_template);
+}
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(ISCI_FW_NAME);
+module_init(isci_init);
+module_exit(isci_exit);