v4.19.13 snapshot.
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
new file mode 100644
index 0000000..59e0236
--- /dev/null
+++ b/drivers/scsi/hpsa.h
@@ -0,0 +1,668 @@
+/*
+ * Disk Array driver for HP Smart Array SAS controllers
+ * Copyright 2016 Microsemi Corporation
+ * Copyright 2014-2015 PMC-Sierra, Inc.
+ * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+#ifndef HPSA_H
+#define HPSA_H
+
+#include <scsi/scsicam.h>
+
+#define IO_OK 0
+#define IO_ERROR 1
+
+struct ctlr_info;
+
+struct access_method {
+ void (*submit_command)(struct ctlr_info *h,
+ struct CommandList *c);
+ void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
+ bool (*intr_pending)(struct ctlr_info *h);
+ unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
+};
+
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+ struct device *parent_dev;
+ struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+ struct list_head port_list_entry;
+ u64 sas_address;
+ struct sas_port *port;
+ int next_phy_index;
+ struct list_head phy_list_head;
+ struct hpsa_sas_node *parent_node;
+ struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+ struct list_head phy_list_entry;
+ struct sas_phy *phy;
+ struct hpsa_sas_port *parent_port;
+ bool added_to_port;
+};
+
+#define EXTERNAL_QD 7
+struct hpsa_scsi_dev_t {
+ unsigned int devtype;
+ int bus, target, lun; /* as presented to the OS */
+ unsigned char scsi3addr[8]; /* as presented to the HW */
+ u8 physical_device : 1;
+ u8 expose_device;
+ u8 removed : 1; /* device is marked for death */
+#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
+ unsigned char device_id[16]; /* from inquiry pg. 0x83 */
+ u64 sas_address;
+ u64 eli; /* from report diags. */
+ unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
+ unsigned char model[16]; /* bytes 16-31 of inquiry data */
+ unsigned char rev; /* byte 2 of inquiry data */
+ unsigned char raid_level; /* from inquiry page 0xC1 */
+ unsigned char volume_offline; /* discovered via TUR or VPD */
+ u16 queue_depth; /* max queue_depth for this device */
+ atomic_t reset_cmds_out; /* Count of commands to-be affected */
+ atomic_t ioaccel_cmds_out; /* Only used for physical devices
+ * counts commands sent to physical
+ * device via "ioaccel" path.
+ */
+ u32 ioaccel_handle;
+ u8 active_path_index;
+ u8 path_map;
+ u8 bay;
+ u8 box[8];
+ u16 phys_connector[8];
+ int offload_config; /* I/O accel RAID offload configured */
+ int offload_enabled; /* I/O accel RAID offload enabled */
+ int offload_to_be_enabled;
+ int hba_ioaccel_enabled;
+ int offload_to_mirror; /* Send next I/O accelerator RAID
+ * offload request to mirror drive
+ */
+ struct raid_map_data raid_map; /* I/O accelerator RAID map */
+
+ /*
+ * Pointers from logical drive map indices to the phys drives that
+ * make those logical drives. Note, multiple logical drives may
+ * share physical drives. You can have for instance 5 physical
+ * drives with 3 logical drives each using those same 5 physical
+ * disks. We need these pointers for counting i/o's out to physical
+ * devices in order to honor physical device queue depth limits.
+ */
+ struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+ int nphysical_disks;
+ int supports_aborts;
+ struct hpsa_sas_port *sas_port;
+ int external; /* 1-from external array 0-not <0-unknown */
+};
+
+struct reply_queue_buffer {
+ u64 *head;
+ size_t size;
+ u8 wraparound;
+ u32 current_entry;
+ dma_addr_t busaddr;
+};
+
+#pragma pack(1)
+struct bmic_controller_parameters {
+ u8 led_flags;
+ u8 enable_command_list_verification;
+ u8 backed_out_write_drives;
+ u16 stripes_for_parity;
+ u8 parity_distribution_mode_flags;
+ u16 max_driver_requests;
+ u16 elevator_trend_count;
+ u8 disable_elevator;
+ u8 force_scan_complete;
+ u8 scsi_transfer_mode;
+ u8 force_narrow;
+ u8 rebuild_priority;
+ u8 expand_priority;
+ u8 host_sdb_asic_fix;
+ u8 pdpi_burst_from_host_disabled;
+ char software_name[64];
+ char hardware_name[32];
+ u8 bridge_revision;
+ u8 snapshot_priority;
+ u32 os_specific;
+ u8 post_prompt_timeout;
+ u8 automatic_drive_slamming;
+ u8 reserved1;
+ u8 nvram_flags;
+ u8 cache_nvram_flags;
+ u8 drive_config_flags;
+ u16 reserved2;
+ u8 temp_warning_level;
+ u8 temp_shutdown_level;
+ u8 temp_condition_reset;
+ u8 max_coalesce_commands;
+ u32 max_coalesce_delay;
+ u8 orca_password[4];
+ u8 access_id[16];
+ u8 reserved[356];
+};
+#pragma pack()
+
+struct ctlr_info {
+ unsigned int *reply_map;
+ int ctlr;
+ char devname[8];
+ char *product_name;
+ struct pci_dev *pdev;
+ u32 board_id;
+ u64 sas_address;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ int nr_cmds; /* Number of commands allowed on this controller */
+#define HPSA_CMDS_RESERVED_FOR_ABORTS 2
+#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
+ struct CfgTable __iomem *cfgtable;
+ int interrupts_enabled;
+ int max_commands;
+ atomic_t commands_outstanding;
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
+# define SIMPLE_MODE_INT 2
+# define MEMQ_MODE_INT 3
+ unsigned int msix_vectors;
+ int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
+ struct access_method access;
+
+ /* queue and queue Info */
+ unsigned int Qdepth;
+ unsigned int maxSG;
+ spinlock_t lock;
+ int maxsgentries;
+ u8 max_cmd_sg_entries;
+ int chainsize;
+ struct SGDescriptor **cmd_sg_list;
+ struct ioaccel2_sg_element **ioaccel2_cmd_sg_list;
+
+ /* pointers to command and error info pool */
+ struct CommandList *cmd_pool;
+ dma_addr_t cmd_pool_dhandle;
+ struct io_accel1_cmd *ioaccel_cmd_pool;
+ dma_addr_t ioaccel_cmd_pool_dhandle;
+ struct io_accel2_cmd *ioaccel2_cmd_pool;
+ dma_addr_t ioaccel2_cmd_pool_dhandle;
+ struct ErrorInfo *errinfo_pool;
+ dma_addr_t errinfo_pool_dhandle;
+ unsigned long *cmd_pool_bits;
+ int scan_finished;
+ u8 scan_waiting : 1;
+ spinlock_t scan_lock;
+ wait_queue_head_t scan_wait_queue;
+
+ struct Scsi_Host *scsi_host;
+ spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */
+ int ndevices; /* number of used elements in .dev[] array. */
+ struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct __iomem *transtable;
+ unsigned long transMethod;
+
+ /* cap concurrent passthrus at some reasonable maximum */
+#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
+ atomic_t passthru_cmds_avail;
+
+ /*
+ * Performant mode completion buffers
+ */
+ size_t reply_queue_size;
+ struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
+ u8 nreply_queues;
+ u32 *blockFetchTable;
+ u32 *ioaccel1_blockFetchTable;
+ u32 *ioaccel2_blockFetchTable;
+ u32 __iomem *ioaccel2_bft2_regs;
+ unsigned char *hba_inquiry_data;
+ u32 driver_support;
+ u32 fw_support;
+ int ioaccel_support;
+ int ioaccel_maxsg;
+ u64 last_intr_timestamp;
+ u32 last_heartbeat;
+ u64 last_heartbeat_timestamp;
+ u32 heartbeat_sample_interval;
+ atomic_t firmware_flash_in_progress;
+ u32 __percpu *lockup_detected;
+ struct delayed_work monitor_ctlr_work;
+ struct delayed_work rescan_ctlr_work;
+ struct delayed_work event_monitor_work;
+ int remove_in_progress;
+ /* Address of h->q[x] is passed to intr handler to know which queue */
+ u8 q[MAX_REPLY_QUEUES];
+ char intrname[MAX_REPLY_QUEUES][16]; /* "hpsa0-msix00" names */
+ u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
+#define HPSATMF_BITS_SUPPORTED (1 << 0)
+#define HPSATMF_PHYS_LUN_RESET (1 << 1)
+#define HPSATMF_PHYS_NEX_RESET (1 << 2)
+#define HPSATMF_PHYS_TASK_ABORT (1 << 3)
+#define HPSATMF_PHYS_TSET_ABORT (1 << 4)
+#define HPSATMF_PHYS_CLEAR_ACA (1 << 5)
+#define HPSATMF_PHYS_CLEAR_TSET (1 << 6)
+#define HPSATMF_PHYS_QRY_TASK (1 << 7)
+#define HPSATMF_PHYS_QRY_TSET (1 << 8)
+#define HPSATMF_PHYS_QRY_ASYNC (1 << 9)
+#define HPSATMF_IOACCEL_ENABLED (1 << 15)
+#define HPSATMF_MASK_SUPPORTED (1 << 16)
+#define HPSATMF_LOG_LUN_RESET (1 << 17)
+#define HPSATMF_LOG_NEX_RESET (1 << 18)
+#define HPSATMF_LOG_TASK_ABORT (1 << 19)
+#define HPSATMF_LOG_TSET_ABORT (1 << 20)
+#define HPSATMF_LOG_CLEAR_ACA (1 << 21)
+#define HPSATMF_LOG_CLEAR_TSET (1 << 22)
+#define HPSATMF_LOG_QRY_TASK (1 << 23)
+#define HPSATMF_LOG_QRY_TSET (1 << 24)
+#define HPSATMF_LOG_QRY_ASYNC (1 << 25)
+ u32 events;
+#define CTLR_STATE_CHANGE_EVENT (1 << 0)
+#define CTLR_ENCLOSURE_HOT_PLUG_EVENT (1 << 1)
+#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV (1 << 4)
+#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV (1 << 5)
+#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL (1 << 6)
+#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED (1 << 30)
+#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31)
+
+#define RESCAN_REQUIRED_EVENT_BITS \
+ (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
+ CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
+ CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
+ CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
+ CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
+ spinlock_t offline_device_lock;
+ struct list_head offline_device_list;
+ int acciopath_status;
+ int drv_req_rescan;
+ int raid_offload_debug;
+ int discovery_polling;
+ int legacy_board;
+ struct ReportLUNdata *lastlogicals;
+ int needs_abort_tags_swizzled;
+ struct workqueue_struct *resubmit_wq;
+ struct workqueue_struct *rescan_ctlr_wq;
+ atomic_t abort_cmds_available;
+ wait_queue_head_t event_sync_wait_queue;
+ struct mutex reset_mutex;
+ u8 reset_in_progress;
+ struct hpsa_sas_node *sas_host;
+ spinlock_t reset_lock;
+};
+
+struct offline_device_entry {
+ unsigned char scsi3addr[8];
+ struct list_head offline_list;
+};
+
+#define HPSA_ABORT_MSG 0
+#define HPSA_DEVICE_RESET_MSG 1
+#define HPSA_RESET_TYPE_CONTROLLER 0x00
+#define HPSA_RESET_TYPE_BUS 0x01
+#define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
+#define HPSA_MSG_SEND_RETRY_LIMIT 10
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
+
+/* Maximum time in seconds driver will wait for command completions
+ * when polling before giving up.
+ */
+#define HPSA_MAX_POLL_TIME_SECS (20)
+
+/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
+ * how many times to retry TEST UNIT READY on a device
+ * while waiting for it to become ready before giving up.
+ * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
+ * between sending TURs while waiting for a device
+ * to become ready.
+ */
+#define HPSA_TUR_RETRY_LIMIT (20)
+#define HPSA_MAX_WAIT_INTERVAL_SECS (30)
+
+/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and
+ * HPSA_BOARD_READY_ITERATIONS are derived from those.
+ */
+#define HPSA_BOARD_READY_WAIT_SECS (120)
+#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL \
+ ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
+#define HPSA_BOARD_READY_ITERATIONS \
+ ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
+ HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_BOARD_NOT_READY_ITERATIONS \
+ ((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+ HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_POST_RESET_PAUSE_MSECS (3000)
+#define HPSA_POST_RESET_NOOP_RETRIES (12)
+
+/* Defining the diffent access_menthods */
+/*
+ * Memory mapped FIFO interface (SMART 53xx cards)
+ */
+#define SA5_DOORBELL 0x20
+#define SA5_REQUEST_PORT_OFFSET 0x40
+#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
+#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
+#define SA5_REPLY_INTR_MASK_OFFSET 0x34
+#define SA5_REPLY_PORT_OFFSET 0x44
+#define SA5_INTR_STATUS 0x30
+#define SA5_SCRATCHPAD_OFFSET 0xB0
+
+#define SA5_CTCFG_OFFSET 0xB4
+#define SA5_CTMEM_OFFSET 0xB8
+
+#define SA5_INTR_OFF 0x08
+#define SA5B_INTR_OFF 0x04
+#define SA5_INTR_PENDING 0x08
+#define SA5B_INTR_PENDING 0x04
+#define FIFO_EMPTY 0xffffffff
+#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+
+#define HPSA_ERROR_BIT 0x02
+
+/* Performant mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
+
+#define HPSA_INTR_ON 1
+#define HPSA_INTR_OFF 0
+
+/*
+ * Inbound Post Queue offsets for IO Accelerator Mode 2
+ */
+#define IOACCEL2_INBOUND_POSTQ_32 0x48
+#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0
+#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4
+
+#define HPSA_PHYSICAL_DEVICE_BUS 0
+#define HPSA_RAID_VOLUME_BUS 1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS 2
+#define HPSA_HBA_BUS 0
+#define HPSA_LEGACY_HBA_BUS 3
+
+/*
+ Send the command to the hardware
+*/
+static void SA5_submit_command(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+}
+
+static void SA5_submit_command_no_read(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+}
+
+static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+}
+
+/*
+ * This card is the opposite of the other cards.
+ * 0 turns interrupts on...
+ * 0x08 turns them off...
+ */
+static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else { /* Turn them off */
+ h->interrupts_enabled = 0;
+ writel(SA5_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+/*
+ * Variant of the above; 0x04 turns interrupts off...
+ */
+static void SA5B_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else { /* Turn them off */
+ h->interrupts_enabled = 0;
+ writel(SA5B_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
+{
+ struct reply_queue_buffer *rq = &h->reply_queue[q];
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* msi auto clears the interrupt pending bit. */
+ if (unlikely(!(h->pdev->msi_enabled || h->msix_vectors))) {
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ (void) readl(h->vaddr + SA5_OUTDB_STATUS);
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ (void) readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
+ register_value = rq->head[rq->current_entry];
+ rq->current_entry++;
+ atomic_dec(&h->commands_outstanding);
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (rq->current_entry == h->max_commands) {
+ rq->current_entry = 0;
+ rq->wraparound ^= 1;
+ }
+ return register_value;
+}
+
+/*
+ * returns value read from hardware.
+ * returns FIFO_EMPTY if there is nothing to read
+ */
+static unsigned long SA5_completed(struct ctlr_info *h,
+ __attribute__((unused)) u8 q)
+{
+ unsigned long register_value
+ = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
+
+ if (register_value != FIFO_EMPTY)
+ atomic_dec(&h->commands_outstanding);
+
+#ifdef HPSA_DEBUG
+ if (register_value != FIFO_EMPTY)
+ dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
+ register_value);
+ else
+ dev_dbg(&h->pdev->dev, "FIFO Empty read\n");
+#endif
+
+ return register_value;
+}
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value =
+ readl(h->vaddr + SA5_INTR_STATUS);
+ return register_value & SA5_INTR_PENDING;
+}
+
+static bool SA5_performant_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
+
+#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT 0x100
+
+static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
+ true : false;
+}
+
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5B_intr_pending(struct ctlr_info *h)
+{
+ return readl(h->vaddr + SA5_INTR_STATUS) & SA5B_INTR_PENDING;
+}
+
+#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0
+#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8
+#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC
+#define IOACCEL_MODE1_REPLY_UNUSED 0xFFFFFFFFFFFFFFFFULL
+
+static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
+{
+ u64 register_value;
+ struct reply_queue_buffer *rq = &h->reply_queue[q];
+
+ BUG_ON(q >= h->nreply_queues);
+
+ register_value = rq->head[rq->current_entry];
+ if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
+ rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
+ if (++rq->current_entry == rq->size)
+ rq->current_entry = 0;
+ /*
+ * @todo
+ *
+ * Don't really need to write the new index after each command,
+ * but with current driver design this is easiest.
+ */
+ wmb();
+ writel((q << 24) | rq->current_entry, h->vaddr +
+ IOACCEL_MODE1_CONSUMER_INDEX);
+ atomic_dec(&h->commands_outstanding);
+ }
+ return (unsigned long) register_value;
+}
+
+static struct access_method SA5_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+/* Duplicate entry of the above to mark unsupported boards */
+static struct access_method SA5A_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+static struct access_method SA5B_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5B_intr_mask,
+ .intr_pending = SA5B_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+static struct access_method SA5_ioaccel_mode1_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_ioaccel_mode1_intr_pending,
+ .command_completed = SA5_ioaccel_mode1_completed,
+};
+
+static struct access_method SA5_ioaccel_mode2_access = {
+ .submit_command = SA5_submit_command_ioaccel2,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
+};
+
+static struct access_method SA5_performant_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
+};
+
+static struct access_method SA5_performant_access_no_read = {
+ .submit_command = SA5_submit_command_no_read,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
+};
+
+struct board_type {
+ u32 board_id;
+ char *product_name;
+ struct access_method *access;
+};
+
+#endif /* HPSA_H */
+